PDF(467.5 KB) View with Adobe Reader on a variety of devices
ePub(421.9 KB) View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
Mobi (Kindle)(498.5 KB) View on Kindle device or Kindle app on multiple devices
Updated:April 25, 2017
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This document describes how to configure APP console access for Cisco IOx. To have access without a password to Guest OS (GOS), appconsole access needs to be setup for the keys which are already provided on Cisco IOx Local Manager.
Cisco recommends that you have knowledge of these topics:
The information in this document is based on these software and hardware versions:
IOx Local Manager
Windown Client PC
The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.
1. From Admin page of the APP mangment click Manage.
2. Click on the Tab App-info.
3. Click on .pem file for pvt key to show in browser.
4.Copy the content of pvt key and save it on desktop of the client PC as txt file.
5. Run the puttygen.exe and import the Key you just downloaded, navigate to Conversions and Import.
Once the file is imported, you will need to save private key, with .ppk extension.
Open the putty.exe now for connection to be established. You will need to present putty.exe private key which is just generated.
Use the appconsole user.
Use the port number which you have previoulsy configured for IoX GOS.
You should be able to log into Console.
Use this section in order to confirm that your configuration works properly.
Run this command on router installed with GOS.
#sh ip nat translations
IR829GW_SJ_desk#sh ip nat translations Pro Inside global Inside local Outside local Outside global tcp 192.0.2.1:2222 188.8.131.52:22 203.0.113.1:57551 203.0.113.1:57551 tcp 192.0.2.1:2222 184.108.40.206:22 --- --- tcp 192.0.2.1:8443 220.127.116.11:8443 --- ---
This section provides information you can use in order to troubleshoot your configuration.
Start troubleshooting from client side with right click on putty.exe and go for Event log.
To check errors download auth.log from IOx Local Manager. You can find on the System Info page in Local IOx Manager in the section Logs.
Mar 10 13:24:32 IR829GW_SJ_desk-GOS-1 sshd: Accepted publickey for appconsole from 203.0.113.1 port 57551 ssh2: RSA SHA256:MLSv45EJfxmhd66dkZG94ZKULTaCh5DpXYsSyLyjA8k Mar 10 13:24:32 IR829GW_SJ_desk-GOS-1 sshd: pam_unix(sshd:session): session opened for user appconsole by (uid=0)