SNMP Service Reinstallation

Available Languages

Updated:June 19, 2013
Document ID:116180

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Introduction

This document describes how to reinstall Cisco Simple Network Management Protocol (SNMP) service. This document applies to Cisco Contact Center SNMP.

Reinstall the Cisco SNMP Service

  1. Discontinue the Contact Center SNMP Management service.
  2. Set the startup type to "disabled."
  3. In a Windows command prompt, enter cccsnmpmgmt.exe - remove in the "icm\bin" folder to remove the service.
  4. Set the Windows SNMP service type to "automatic."
  5. Start the Windows SNMP service.
  6. Once the Cisco SNMP is completely uninstalled, copy the folder from the "c:\icm\snmp" location of a known functional machine and send it to a machine that is not functional.
  7. In a Windows command prompt, enter cccsnmpmgmt.exe -install in the "icm\bin" folder to install the Cisco Contact Center SNMP (CCCSNMP) service.
  8. Once the service is reinstalled, set the CCCSNMP service startup type to "automatic" and start the service. This automatically disables the Windows SNMP service.

Related Information



Revision History

Revision Publish Date Comments
1.0
19-Jun-2013
Initial Release
TAC Authored

Contributed by Cisco Engineers

  • Aashish Gupta
    Cisco TAC Engineer.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco

This Document Applies to These Products