THIS FIELD NOTICE IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTY OF MERCHANTABILITY. YOUR USE OF THE INFORMATION ON THE FIELD NOTICE OR MATERIALS LINKED FROM THE FIELD NOTICE IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS FIELD NOTICE AT ANY TIME.
Revision | Publish Date | Comments |
---|---|---|
1.0 |
10-Jan-19 |
Initial Release |
1.1 |
12-Apr-19 |
Updated the Problem Description and Problem Symptom Sections |
1.2 |
15-Apr-19 |
Updated the Workaround/Solution Section |
Affected OS Type | Affected Software Product | Affected Release | Affected Release Number | Comments |
---|---|---|---|---|
NON-IOS |
Identity Services Engine System Software |
2 |
2.0, 2.0.1, 2.1.0, 2.2.0, 2.3.0, 2.4.0 |
ISE 2.0 & 2.0.1 - up to and including Patch 7 ISE 2.1 - up to and including Patch 7 ISE 2.2 - up to and including Patch 12 ISE 2.3 - up to and including Patch 5 ISE 2.4 - up to and including Patch 4 |
Defect ID | Headline |
---|---|
CSCvm03681 | EAP-FAST doesn't support correct key generation in TLS 1.2 |
Cisco Identity Services Engine (ISE) fails to authenticate endpoint devices when using Extensible Authentication Protocol-Flexible Authentication via Secure Tunneling (EAP-FAST) with Transport Layer Security (TLS) 1.2. This issue occurs with these Cisco products and versions and might occur with other supplicants that add TLS 1.2 support:
With EAP-FAST and Microsoft Challenge Handshake Authentication Protocol Version 2 (MSCHAPv2), the Authenticator/Peer negotiation for Anonymous Protected Access Credential (PAC) provisioning is computed from the pseudo-random function (PRF). For this issue, the PRFs differ and, as a result, the inner MSCHAP authentication will fail with a wrong password error message.
When EAP-FAST is used with any affected ISE releases and the supplicant attempts to use TLS 1.2, authentication will fail and endpoints will not have access to the network.
In order to resolve this issue, upgrade the ISE software as shown for these releases:
Note: In order to obtain the hot patches for ISE releases 2.0 and 2.0.1, contact the Cisco Technical Assistance Center (TAC). Ensure the ISE software has the latest patch applied before you apply the hot patch.
If you require further assistance, or if you have any further questions regarding this field notice, please contact the Cisco Systems Technical Assistance Center (TAC) by one of the following methods:
Cisco Notification Service—Set up a profile to receive email updates about reliability, safety, network security, and end-of-sale issues for the Cisco products you specify.