THIS FIELD NOTICE IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTY OF MERCHANTABILITY. YOUR USE OF THE INFORMATION ON THE FIELD NOTICE OR MATERIALS LINKED FROM THE FIELD NOTICE IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS FIELD NOTICE AT ANY TIME.
Revision | Publish Date | Comments |
---|---|---|
1.0 |
20-Apr-21 |
Initial Release |
1.1 |
30-Apr-21 |
Updated the Workaround/Solution Section |
Affected Product ID | Comments |
---|---|
ASR1001X-20G-K9 |
|
ASR1001X-10G-K9 |
|
ASR1001X-5G-K9 |
|
ASR1001X-2.5G-K9 |
|
ASR1001-X= |
Part Alternate |
ASR1001-X |
|
ASR1001X-20G-SEC |
|
ASR1001X-10G-VPN |
|
ASR1001X-5G-SEC |
|
ASR1001X-5G-VPN |
|
ASR1001X-2.5G-VPN |
|
ASR1001X-10G-SEC |
|
ASR1001X-2.5G-SEC |
|
ASR1001X-20G-VPN |
|
ASR1001X-AIS-AX |
|
ASR1001X-AES-AX |
|
C1-ASR1001-X/K9 |
|
ASR1002-HX= |
Part Alternate |
ASR1002-HX |
|
ASR1001-HX= |
Part Alternate |
ASR1001-HX |
|
ASR1000-RP3= |
Part Alternate |
ASR1000-RP3 |
|
C1-ASR1002-HX/K9 |
|
C1-ASR1002-HX/K9= |
|
C1-ASR1001-HX/K9 |
|
ASR1000-RP3++= |
|
ASR1001-HX-4GE |
|
ASR1002-HX-DNA |
|
ASR1001-X-DNA |
|
ASR1002HX-6GE-2TE |
|
ASR1001-HX-DNA |
|
ISR4451-X/K9 |
|
ISR4451-X-VSEC/K9 |
|
ISR4451-X-V/K9 |
|
ISR4451-X-SEC/K9 |
|
ISR4451-X-AX/K9 |
|
ISR4451XWAAS-200G |
|
ISR4431-V/K9 |
|
ISR4351-SEC/K9 |
|
ISR4351/K9 |
|
ISR4431-SEC/K9 |
|
ISR4431-VSEC/K9 |
|
ISR4431/K9 |
|
ISR4351-VSEC/K9 |
|
ISR4351-V/K9 |
|
ISR4431-AX/K9 |
|
ISR4331/K9 |
|
ISR4331-SEC/K9 |
|
ISR4451-X-AXV/K9 |
|
ISR4451-UCSE-S/K9 |
|
ISR4321/K9 |
|
ISR4331-V/K9 |
|
ISR4321-SEC/K9 |
|
ISR4451X-AX-AKC/K9 |
|
ISR4331-AXV/K9 |
|
ISR4331-VSEC/K9 |
|
ISR4431-AXV/K9 |
|
ISR4331-AX/K9 |
|
ISR4351-AXV/K9 |
|
ISR4451-UCSE-D/K9 |
|
ISR4321-V/K9 |
|
ISR4321-VSEC/K9 |
|
ISR4321-AXV/K9 |
|
ISR4321-AX/K9 |
|
ISR4351-AX/K9 |
|
C1-CISCO4451/K9 |
|
C1-CISCO4431/K9 |
|
C1-CISCO4351/K9 |
|
C1-CISCO4331/K9 |
|
C1-CISCO4321/K9 |
|
ISR4451-AXV-BUN |
|
ISR4451-AX-BUN |
|
ISR4331BR-V/K9 |
|
ISR4331BR/K9 |
|
SI-ISR4321-IWAN/K9 |
|
SI-ISR4331-IWAN/K9 |
|
SI-ISR4351-IWAN/K9 |
|
SI-ISR4431-IWAN/K9 |
|
SI-ISR4451-IWAN/K9 |
|
ISR4331-B/K9 |
|
ISR4321-B/K9 |
|
ISR4221/K9 |
|
ISR4221-B/K9 |
|
ISR4221-SEC/K9 |
|
ISR4221-AX/K9 |
|
C1-CISCO4221/K9 |
|
SPIAD4321 |
|
C1-CISCO4221J/K9 |
|
C1-CISCO4221T-P/K9 |
|
ISR4221T-P/K9 |
|
C1-CISCO4321T-P/K9 |
|
C1-CISCO4331T-P/K9 |
|
ISR4221X/K9 |
|
ISR4331-DC/K9 |
|
ISR4461-AX/K9 |
|
ISR4461-AXV/K9 |
|
ISR4461-VSEC/K9 |
|
ISR4461-V/K9 |
|
ISR4461-SEC/K9 |
|
ISR4461/K9 |
|
ISR4331-DNA |
|
ISR4451-DNA |
|
C1-CISCO4331-DC/K9 |
|
ISR4321-DNA |
|
ISR4351-DNA |
|
ISR4431-DNA |
|
ISR4331-SPM-8G |
|
ISR4331-SPM |
|
ISR4221X-CDNA |
|
ISR4331-CDNA |
|
ISR4461-DNA |
|
ISR4461-K9-CAP |
|
C819G-4G-G-K9 |
|
C819G-4G-A-K9 |
|
C812G-CIFI-V-A-K9 |
|
C812G-CIFI-S-A-K9 |
|
C812G-CIFI+7-N-K9 |
|
C812G-CIFI+7-E-K9 |
|
C812G+7-K9 |
|
C819G-4G-G-K9 |
|
C819G-4G-A-K9 |
|
C819G-4G-V-K9 |
|
C819G-B-K9 |
|
C812G+7-K9 |
|
C819G-4G-GA-K9 |
|
C819G-4G-VZ-K9 |
|
C819G-4G-ST-K9 |
|
C819G-4G-NA-K9 |
|
C819G-V-K9 |
|
C819G-S-K9 |
|
C819G-U-K9 |
|
C819G+7-K9 |
|
C819G-U-PCI-K9 |
|
C819G-LTE-MNA-K9 |
|
C819G-LTE-LA-K9 |
|
C819H-K9 |
|
C819GW-LTE-MNA-AK9 |
|
C819GW-LTE-GA-EK9 |
|
C819GW-LTE-LA-QK9 |
|
C819GW-LTE-LA-CK9 |
|
C819GW-LTE-LA-NK9 |
|
C819HG-S-K9 |
|
C819HG-V-K9 |
|
C819HG-B-K9 |
|
C819HG-U-K9 |
|
C819HG+7-K9 |
|
C819HG-4G-G-K9 |
|
C819HG-4G-A-K9 |
|
C819HG-4G-V-K9 |
|
C819HG-LTE-MNA-K9 |
Part Alternate |
C819HGW+7-N-K9 |
|
C819HWD-E-K9 |
|
C819HWD-A-K9 |
|
C819HGW+7-A-A-K9 |
|
C819HGW+7-E-K9 |
|
C819HGW-V-A-K9 |
|
C819HGW-S-A-K9 |
|
C819HWD-C-K9 |
|
C881W-A-K9 |
|
C881W-E-K9 |
|
C881W-P-K9 |
|
C893G-S-K9 |
|
C893G-V-K9 |
|
C892FSP-K9 |
|
CTW-WA-CVO-K9 |
|
C881W-A-CVO-K9 |
|
C891FW-E-K9 |
|
C891FW-A-K9 |
|
C888-K9 |
|
C881-K9 |
|
C891FJ-K9 |
|
C881-ECO5-K9 |
|
C891-24X/K9 |
|
C892FSP-K9++ |
|
C891FW-E-K9++ |
|
C891FW-A-K9++ |
|
C891FJ-K9++ |
|
C891-24X/K9++ |
|
C881-K9++ |
|
C893GW-S-A-K9 |
|
C893GW-V-A-K9 |
|
C898EA-K9 |
|
C898EAG-LTE-GA-K9 |
|
C899G-LTE-VZ-K9 |
|
C899G-LTE-NA-K9 |
|
C899G-LTE-JP-K9 |
|
C898EAG-LTE-LA-K9 |
|
C899G-LTE-LA-K9 |
|
C899G-LTE-NA-K9++ |
|
C898EA-K9++ |
|
C899G-LTE-GA-K9 |
|
C899G-LTE-ST-K9 |
|
C896VA-K9 |
|
C897VA-K9 |
|
C897VA-M-K9 |
|
C897VAM-W-E-K9 |
|
C897VAW-A-K9 |
|
C897VAW-E-K9 |
|
C866VAE-W-E-K9 |
|
C896VAG-LTE-GA-K9 |
|
C897VAG-LTE-GA-K9 |
|
C897VAB-K9 |
|
C897VAMG-LTE-GA-K9 |
|
C897VAGW-LTE-GAEK9 |
|
C897VAG-LTE-LA-K9 |
|
C866VAE-K9 |
|
C897VAW-A-K9++ |
|
C897VAB-K9++ |
|
C897VA-M-K9++ |
|
C897VA-K9++ |
|
C896VA-K9++ |
|
C867VAE-W-A-K9 |
|
C867VAE-W-E-K9 |
|
C867VAE-POE-W-A-K9 |
|
C867VAE |
|
C867VAE-K9 |
|
C886VA-W-E-K9 |
|
C887VA-W-A-K9 |
|
C887VA-W-E-K9 |
|
CISCO861-PCI-K9 |
|
CISCO866VAE |
|
CISCO866VAE-K9 |
|
CISCO867VAE |
|
CISCO867VAE-K9 |
|
C887VAM-W-E-K9 |
|
C867VAE-ECO5-K9 |
|
C866VAE-ECO5-K9 |
|
C887VAM-K9 |
|
C887VA-K9 |
|
C886VAJ-K9 |
|
C886VA-K9 |
|
CISCO867VAE-PCI-K9 |
|
C886VAG-LTE-GA-K9 |
|
CISCO867VAE-K9++ |
|
CISCO866VAE-K9++ |
|
C887VA-K9++ |
|
C886VA-K9++ |
Defect ID | Headline |
---|---|
CSCvx28898 | SUDI certificate expiration may impact functionality |
The Cisco Secure Unique Device Identifier (SUDI) certificate, when registered to a Public Key Infrastructure (PKI) AND used to configure certain functionalities on Cisco IOS® and Cisco IOS XE, will expire on a limited number of Cisco products (see the Products Affected section). Any service that relies on a SUDI certificate to establish a secure connection might not work after the certificate expires.
SUDI is an X.509v3 certificate which maintains the product identifier and serial number. The identity is implemented at manufacturing and is linked to a publicly identifiable root Certificate Authority (CA). The SUDI can be used as an immutable identity for configuration, security, auditing, and management.
The Cisco SUDI certificate, when registered to a PKI and used to configure certain functionalities on Cisco IOS and Cisco IOS XE, will expire on a limited number of Cisco products either on [the date of manufacture + 10 years] or 2029-05-14, whichever is earlier. Any service which relies on a SUDI certificate to establish a secure connection might NOT work after the certificate expires.
In order to determine the SUDI certification expiration date, enter this command:
router>show crypto pki certificates Certificate Status: Available Certificate Serial Number (hex): 051E49D9 Certificate Usage: General Purpose Issuer: cn=ACT2 SUDI CA o=Cisco Subject: Name: ISR4331/K9 Serial Number: PID:ISR4331/K9 SN:FDO241617C1 cn=ISR4331/K9 ou=ACT-2 Lite SUDI o=Cisco serialNumber=PID:ISR4331/K9 SN:FDO241617C1 Validity Date: start date: 02:23:17 UTC Apr 20 2020 end date: 20:25:41 UTC May 14 2029 Associated Trustpoints: CISCO_IDEVID_SUDI
In order to determine if a SUDI trust point is used, enter this command:
Router# show run | i CISCO_IDEVID_SUDI
Various features that might be linked to the SUDI certificate are shown in these sample configurations:
HTTPS
ip http secure-trustpoint CISCO_IDEVID_SUDI ip http client secure-trustpoint CISCO_IDEVID_SUDI
SSH Authentication Using Certificates
ip ssh server certificate profile server trustpoint sign CISCO_IDEVID_SUDI
ZTD Using a Certificate Enrollment Profile for Enrollment or Reenrollment
crypto pki profile enrollment profile-name credential CISCO_IDEVID_SUDI
Any services that rely on a trust point configured with an expiring Cisco SUDI certificate will be affected. Some examples are:
Customers should use one of these four workaround methods in order to install/use an alternate certificate:
Notes:
Workaround 1
Install a certificate from a CA.
In this workaround, a certificate request is generated and displayed by Cisco IOS. The administrator then copies the request and submits it to a third-party CA and retrieves the result.
Note: Use of a CA to sign certificates is a security best-practice. This procedure is provided as a workaround in this field notice. However, it is preferable to continue to use the third-party CA-signed certificate after you apply this workaround, rather than to use a self-signed certificate.
In order to install a certificate from a third-party CA, complete these steps:
Router# conf t Enter configuration commands, one per line. End with CNTL/Z. Router(config)# crypto pki trustpoint TEST Router(ca-trustpoint)# enrollment term pem Router(ca-trustpoint)# subject-name CN=TEST Router(ca-trustpoint)# revocation-check none Router(ca-trustpoint)# rsakeypair TEST Router(ca-trustpoint)# exit Router(config)# crypto pki enroll TEST % Start certificate enrollment .. % The subject name in the certificate will include: CN=TEST % The subject name in the certificate will include: Router.cisco.com % The serial number in the certificate will be: FTX1234ABCD % Include an IP address in the subject name? [no]: no Display Certificate Request to terminal? [yes/no]: yes Certificate Request follows: -----BEGIN CERTIFICATE REQUEST----- A Base64 Certificate is displayed here. Copy it, along with the ---BEGIN and ---END lines. -----END CERTIFICATE REQUEST----- ---End - This line not part of the certificate request---
Note: The procedure to submit the CSR to a third-party CA and retrieve the resulting certificate varies based on the CA that is used. Consult the documentation of your CA for instructions on how to perform this step.
Router# conf t Enter configuration commands, one per line. End with CNTL/Z. Router(config)# crypto pki auth TEST Enter the base 64 encoded CA certificate. End with a blank line or the word "quit" on a line by itself -----BEGIN CERTIFICATE----- REMOVED -----END CERTIFICATE----- Certificate has the following attributes: Fingerprint MD5: 79D15A9F C7EB4882 83AC50AC 7B0FC625 Fingerprint SHA1: 0A80CC2C 9C779D20 9071E790 B82421DE B47E9006 % Do you accept this certificate? [yes/no]: yes Trustpoint CA certificate accepted. % Certificate successfully imported Install the identity certificate on the device. Router(config)# crypto pki import TEST certificate Enter the base 64 encoded certificate. End with a blank line or the word "quit" on a line by itself -----BEGIN CERTIFICATE----- REMOVED -----END CERTIFICATE----- % Router Certificate successfully imported
Workaround 2
Use the local Cisco IOS CA server to generate and sign a new certificate.
Note: The local CA server feature is NOT available on all products.
Router# conf t Enter configuration commands, one per line. End with CNTL/Z. Router(config)# ip http server Router(config)# crypto pki server IOS-CA Router(cs-server)# grant auto Router(cs-server)# database level complete Router(cs-server)# no shut %Some server settings cannot be changed after CA certificate generation. % Please enter a passphrase to protect the private key % or type Return to exit Password: <password> Re-enter password: <password> % Generating 1024 bit RSA keys, keys will be non-exportable... [OK] (elapsed time was 1 seconds) % Certificate Server enabled. Router# show crypto pki server IOS-CA Certificates Serial Issued date Expire date Subject Name 1 21:31:40 EST Jan 1 2020 21:31:40 EST Dec 31 2022 cn=IOS-CA Router# conf t Enter configuration commands, one per line. End with CNTL/Z. Router(config)# crypto pki trustpoint TEST Router(ca-trustpoint)# enrollment url http://<local interface ip>:80 # Replace <local interface ip> with the IP address of an interface on the router Router(ca-trustpoint)# subject-name CN=TEST Router(ca-trustpoint)# revocation-check none Router(ca-trustpoint)# rsakeypair TEST Router(ca-trustpoint)# exit Router# conf t Enter configuration commands, one per line. End with CNTL/Z. Router(config)# crypto pki auth TEST Certificate has the following attributes: Fingerprint MD5: C281D9A0 337659CB D1B03AA6 11BD6E40 Fingerprint SHA1: 1779C425 3DCEE86D 2B11C880 D92361D6 8E2B71FF % Do you accept this certificate? [yes/no]: yes Trustpoint CA certificate accepted. Router(config)# crypto pki enroll TEST % % Start certificate enrollment .. % Create a challenge password. You will need to verbally provide this password to the CA Administrator in order to revoke your certificate. For security reasons your password will not be saved in the configuration. Please make a note of it. Password: <password> Re-enter password: <password> % The subject name in the certificate will include: CN=TEST % The subject name in the certificate will include: Router.cisco.com % Include the router serial number in the subject name? [yes/no]: yes % The serial number in the certificate will be: FTX1234ABCD % Include an IP address in the subject name? [no]: no Request certificate from CA? [yes/no]: yes % Certificate request sent to Certificate Authority % The 'show crypto pki certificate verbose TEST' command will show the fingerprint.
Workaround 3
Use OpenSSL to generate a PKCS12 certificate bundle and import the bundle to Cisco IOS.
Note: This process generates a self-signed certificate and a corresponding key-pair package into a PKCS12 formatted file. This file is protected only by a password. Compromise of the password or of the key-pair itself will enable an unauthorized party to replicate this certificate. Appropriate steps should be taken to keep the key-pair and password confidential.
Linux, UNIX, or macOS Example
User@linux-box$ openssl req -newkey rsa:2048 -nodes -keyout tmp.key -x509 -days 4000 -out tmp.cer -subj "/CN=SelfSignedCert" &> /dev/null && openssl pkcs12 -export -in tmp.cer -inkey tmp.key -out tmp.bin -passout pass:<use a secure password> && openssl pkcs12 -export -out certificate.pfx -password pass:<use a secure password> -inkey tmp.key -in tmp.cer && rm tmp.bin tmp.key tmp.cer && openssl base64 -in certificate.pfx MIII8QIBAzCCCLcGCSqGSIb3DQEHAaCCCKgEggikMIIIoDCCA1cGCSqGSIb3DQEH BqCCA0gwggNEAgEAMIIDPQYJKoZIhvcNAQcBMBwGCiqGSIb3DQEMAQYwDgQIGnxm t5r28FECAggAgIIDEKyw10smucdQGt1c0DdfYXwUo8BwaBnzQvN0ClawXNQln2bT vrhus6LfRvVxBNPeQz2ADgLikGxatwV5EDgooM+IEucKDURGLEotaRrVU5Wk3EGM mjC6Ko9OaM30vhAGEEXrk26cq+OWsEuF3qudggRYv2gIBcrJ2iUQNFsBIrvlGHRo FphOTqhVaAPxZS7hOB30cK1tMKHOIa8EwygyBvQPfjjBT79QFgeexIJFmUtqYX/P <OUTPUT OMITTED FOR BREVITY> tT6r4SuibYKu6HV45ffjSzOimcJI+D9LKhLWR6pK/k5ge8v7aK9/rsVbjavbdy7b CSqGSIb3DQEJFTEWBBS96DY/gRfN1dSx46P1EqjPvSYiETAxMCEwCQYFKw4DAhoF AAQU+EX0kNvuNz6XmFxXER8wlqKTGvgECA+D+Z81uwafAgIIAA==
Router# conf t Enter configuration commands, one per line. End with CNTL/Z. Router(config)# crypto pki trustpoint TEST Router(ca-trustpoint)# enrollment terminal Router(ca-trustpoint)# revocation-check none Router(ca-trustpoint)# exit R1(config)#crypto pki import TEST pkcs12 terminal password <use a secure password> Enter the base 64 encoded pkcs12. End with a blank line or the word "quit" on a line by itself: MIII8QIBAzCCCLcGCSqGSIb3DQEHAaCCCKgEggikMIIIoDCCA1cGCSqGSIb3DQEH BqCCA0gwggNEAgEAMIIDPQYJKoZIhvcNAQcBMBwGCiqGSIb3DQEMAQYwDgQItyCo Vh05+0QCAggAgIIDENUWY+UeuY5sIRZuoBi2nEhdIPd1th/auBYtX79aXGiz/iEW OUTPUT OMITTED FOR BREVITY> IY1l273y9bC3qPVJ0UGoQW8SGfarqEjaqxdAet66E5V6u9Yvd4oMsIYGsa70m+FN CsUVj+ll5hzGjK78L0ycXWpH4gDOGYBVf+D7mgWqaqZvxYUoEkOrTMmW5zElMCMG CSqGSIb3DQEJFTEWBBSgiBJIYpJLzo/GYN0sesZh3wGmPTAxMCEwCQYFKw4DAhoF AAQUdeUrLIC2uo/mbyE86he5+qEjmPYECKu76GWaeKb7AgIIAA== quit CRYPTO_PKI: Imported PKCS12 file successfully. R1(config)#
R1#show crypto pki certificates TEST Load for five secs: 5%/1%; one minute: 2%; five minutes: 3% Time source is SNTP, 15:04:37.593 UTC Mon Dec 16 2019 CA Certificate Status: Available Certificate Serial Number (hex): 00A16966E46A435A99 Certificate Usage: General Purpose Issuer: cn=SelfSignedCert Subject: cn=SelfSignedCert Validity Date: start date: 14:54:46 UTC Dec 16 2019 end date: 14:54:46 UTC Nov 28 2030
Workaround 4
Acquire a certificate from the customer's PKI using SCEP. This is a typical use case for utility customers. The steps to set up the IoT device to acquire a certificate from the customers PKI are:
crypto pki trustpoint LDevID enrollment retry count 10 enrollment retry period 2 enrollment profile LDevID serial-number none fqdn none ip-address none password fingerprint 3F520C4C0F3236C9CA3D5C209C9948EC subject-name serialNumber=PID:IR829M-LTE-EA-AK9 SN:FTX2140Z04X,CN=FTX2140Z04X revocation-check none rsakeypair LDevID 2048
crypto pki profile enrollment LDevID enrollment url http://192.168.0.254:80 < This is the RA or CA IP address and the port number.
conf t crypto pki authenticate LDevID
conf t crypto pki enroll LDevID
If you require further assistance, or if you have any further questions regarding this field notice, please contact the Cisco Systems Technical Assistance Center (TAC) by one of the following methods:
My Notifications—Set up a profile to receive email updates about reliability, safety, network security, and end-of-sale issues for the Cisco products you specify.
Unleash the Power of TAC's Virtual Assistance