PDF(53.5 KB) View with Adobe Reader on a variety of devices
ePub(67.4 KB) View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
Mobi (Kindle)(68.3 KB) View on Kindle device or Kindle app on multiple devices
Updated:December 29, 2015
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This document describes how to capture Point-to-Point Packet over Ethernet (PPPoE) packet on an ingress interface of ASR1000 box.
Cisco recommends that you meet these requirements before you attempt this configuration:
Layer 1 connectivity between ASR1k and the client router is up
This document is restricted to XE version 3.13 and above.
PPPoE Server - ASR1006
PPPoE Client - Any Cisco Router
The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.
This document help a techinician to determine if PPPoE packets are actually hitting the interface of the ASR1k router acting as a PPPoE Server. This is usefull in scenarios where we troubleshoot PPPoE failures.