PDF(3.1 MB) View with Adobe Reader on a variety of devices
ePub(2.6 MB) View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
Mobi (Kindle)(855.3 KB) View on Kindle device or Kindle app on multiple devices
Updated:May 27, 2016
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
The Cisco Firepower 7000 series hardware platform comes with two different form factors. This document illustrates the steps to install rail kit on a Cisco Firepower 7000 series hardware platform.
Width of Hardware
Within the 7000 series platform, the Firepower 7110 and 7120 devices are 1U appliances. However, the Firepower 7010, 7020, 7030, and 7050 devices are 1U appliances with one-half width of the rack tray.
Front view of a Cisco Firepower 70xx model
Front view of a Cisco Firepower 71xx model
Mini 1U Installed onto 1U Tray
Step 1: Install power adaptors in chassis
Step 2: Install mini 1U systems in chassis
Step 3: Secure mini 1U systems with thumb screws
Post-Rack Installed onto 1U Tray
Step 1: Attach 2-post ear to chassis side wall
Step 2: Install chassis into 2-rack post
Columbus 1U Rack Mount Slide
Step 1: Remove the inner rail from the rail assembly
Step 2: Attach inner rails to chassis sidewall
Step 3: Mount the L-shape bracket onto the outer rail