PDF(240.5 KB) View with Adobe Reader on a variety of devices
ePub(276.7 KB) View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
Mobi (Kindle)(164.4 KB) View on Kindle device or Kindle app on multiple devices
Updated:December 11, 2018
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Status Messages on SPA525G/SPA525G2 IP Phones
This document showcases the procedure for checking the Status messages on the SPA525G and SPA525G2 IP Phones. These messages can be of help for troubleshooting purposes.
• SPA 525G • SPA 525G2
Step 1. Press the Setup button on the phone. The Information and Settings menu appears.
Step 2. Use the navigation keys and scroll down to Status. Press the Select softkey. The Status menu appears.
Step 3. Use the navigation keys and scroll down to Status messages in the Status Menu entered in previous step. Press the Select soft key. The Status Messages menu appears.
Currently as there is no activity on the SPA525G/SPA525G2, it is showing the first activity it performed after booting; getting the firmware from the unified communication device. The "Got SEP405539A2A2A016.cnf.xml" is the file it got from the unified communication device. When there is any troubleshooting to be done, these messages can help as a debug trace.
Press the Back soft key to go back to the previous Status menu.