PDF(33.6 KB) View with Adobe Reader on a variety of devices
ePub(103.1 KB) View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
Mobi (Kindle)(96.8 KB) View on Kindle device or Kindle app on multiple devices
Updated:December 8, 2020
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This document describes the procedure to replace a node in a Cloud Service Platform (CSP) cluster if storage virtualization is enabled.
Cisco recommends that you have knowledge of Cisco CSP Software.
The information in this document is based on these software and hardware versions:
UCS C Series - Cisco Integrated Management Controller (CIMC)
Keyboard Video Mouse (KVM) to Map Virtual Media
CSP 2100 International Organization for Standardization (ISO)
The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, ensure that you understand the potential impact of any command.
If a CSP server in a cluster with storage virtualization enabled needs to be replaced, follow the procedure to remove that server from the cluster and add the new server into the current cluster.
Make sure storage virtualization is enabled in the setup on the Cluster Advance Configuration tab, verify Enable Storage Network is set to true.
Contact Cisco TAC to swap a replacement node into a CSP cluster with Enable Storage Network set to true, TAC uses internal documentation titled Replace Node in a CSP Cluster if Storage Virtualization is Enabled.