PDF(50.6 KB) View with Adobe Reader on a variety of devices
ePub(118.4 KB) View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
Mobi (Kindle)(112.0 KB) View on Kindle device or Kindle app on multiple devices
Updated:November 22, 2018
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This document describes how to install the device pack in Cisco Unified Communication Manager (CUCM) for new devices.
Cisco recommends that you have knowledge of CUCM. The official install guide can be found here.
The information in this document is based on CUCM version 10.5.2.
The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.
Step 1. Download the appropriate device pack from Cisco.com. The image shows an example of a device pack downloaded for CUCM software version 10.5(2.15112). Once the file downloads, locate it on your PC, as shown in the image. CUCM needs to be reachable from this PC.
Step 2. Open a FTP server and connect with CUCM as shownin the image. In this example, Core FTP is the FTP software used, however, similar softwares can be used such as Filezilla.
Step 3. On the FTP server, specify the folder that contains the software to be uploaded, as shown in the image.
Step 4. Start the FTP service and configure a user and password for the connection, as shown in the image.
Step 5. On CUCM web interface, navigate to CUCM > OS Administration page.