|
|
|
|
(config) aaa accounting |
Configures AAA accounting. |
global configuration |
All |
(config) aaa authorization commands |
Configures AAA authorization. |
global configuration |
All |
(config) accelerator cifs |
Enables the CIFS application accelerator. |
global configuration |
application- accelerator |
(config) accelerator cifs preposition |
Configures a CIFS application accelerator preposition directive. |
global configuration |
application- accelerator |
(config) accelerator epm |
Enables the EPM application accelerator. |
global configuration |
application- accelerator |
(config) accelerator http |
Enables the HTTP application accelerator. |
global configuration |
application- accelerator |
(config) accelerator mapi |
Enables the MAPI application accelerator. |
global configuration |
application- accelerator |
(config) accelerator nfs |
Enables the NFS application accelerator. |
global configuration |
application- accelerator |
(config) accelerator ssl |
Enables the SSL application accelerator. |
global configuration |
application- accelerator |
(config) accelerator video |
Enables the video application accelerator. |
global configuration |
application- accelerator |
(config) accelerator windows-print |
Enables the Windows print accelerator |
global configuration |
application- accelerator |
(config) alarm overload-detect |
Configures the detection of an alarm overload. |
global configuration |
All |
(config) asset |
Configures the tag name for the asset tag string. |
global configuration |
All |
(config) authentication configuration |
Configures administrative authentication and authorization parameters. |
global configuration |
All |
(config) authentication content-request |
Configures request for content authentication and authorization parameters. |
global configuration |
All |
(config) authentication fail-over |
Configures authentication failover if the primary authentication server is unreachable. |
global configuration |
All |
(config) authentication login |
Configures administrative login authentication and authorization parameters. |
global configuration |
All |
(config) authentication strict-password-policy |
Configures strong password policy parameters. |
global configuration |
All |
(config) auto-discovery |
Discovers origin servers that cannot receive TCP packets with options and adds the IP addresses to a blacklist for a specified number of minutes. |
global configuration |
application- accelerator |
(config) auto-register |
Enables the discovery of a primary interface on a WAE and its automatic registration with the WAAS Central Manager through DHCP. |
global configuration |
application- accelerator |
(config-if) autosense |
Sets the current interface to autosense. |
interface configuration |
All |
(config-vb) autostart |
Sets a virtual blade to automatically start when the WAE is started. |
virtual blade configuration |
application- accelerator |
(config-if) bandwidth |
Sets the specified interface bandwidth to 10, 100, or 1000 Mbps. |
interface configuration |
All |
(config) banner |
Configures message-of-the-day, login, login and EXEC banners. |
global configuration |
All |
(config-vb) boot |
Configures the boot image location and source for a virtual blade. |
virtual blade configuration |
application- accelerator |
(config) bridge |
Creates a bridge interface for use by a virtual blade. |
global configuration |
application- accelerator |
(config) bypass |
Configures the bypass functions on a WAE. |
global configuration |
application- accelerator |
(config-ca) ca-certificate |
Sets the certification authority file. |
certification authority configuration |
All |
cd |
Changes the directory. |
user-level EXEC and privileged-level EXEC |
All |
(config) cdp |
Enables the Cisco Discovery Protocol (CDP) for the WAAS device. |
global configuration |
All |
(config-if) cdp |
Enables CDP on an interface. |
interface configuration |
All |
(config) central-manager |
In application-accelerator mode, used to specify the IP address of the WAAS Central Manager with which the WAE needs to register. In central-manager mode, used to specify the WAAS Central Manager's role and GUI port number. |
global configuration |
All |
(config-cipher-list) cipher |
Configures a cipher suite on the cipher list. |
cipher list configuration |
All |
(config-ssl-accelerated) cipher-list |
Configures secure socket layer (SSL) encryption cipher lists on a WAAS device. |
SSL accelerated service configuration |
All |
(config-ssl-global) cipher-list |
Configures secure socket layer (SSL) encryption cipher lists on a WAAS device. |
SSL global service configuration |
All |
(config-ssl-peering) cipher-list |
Configures secure socket layer (SSL) encryption cipher lists on a WAAS device. |
SSL host peering service configuration |
All |
(config-ssl-mgmt) cipher-list |
Configures secure socket layer (SSL) encryption cipher lists on a WAAS device. |
SSL management service configuration |
All |
clear arp-cache |
Resets the ARP cache. |
privileged-level EXEC |
application- accelerator |
clear cache |
Resets the cached objects. |
privileged-level EXEC |
application- accelerator |
clear cdp |
Resets Cisco Discovery Protocol statistics. |
privileged-level EXEC |
All |
clear ip |
Resets IP access list statistics. |
privileged-level EXEC |
All |
clear license |
Resets licensing configuration. |
privileged-level EXEC |
All |
clear logging |
Resets the syslog messages saved in a disk file. |
privileged-level EXEC |
All |
clear statistics |
Resets statistics data. |
privileged-level EXEC |
All |
clear statistics accelerator |
Resets all global statistics. |
privileged-level EXEC |
All |
clear statistics connection |
Resets connection statistics. |
privileged-level EXEC |
All |
clear statistics vn-service vpath |
Resets VPATH statistics. |
privileged-level EXEC |
All |
clear transaction-log |
Archives the working transaction log file. |
privileged-level EXEC |
application accelerator |
clear users |
Resets user connections or unlocks users that have been locked out. |
privileged-level EXEC |
All |
clear windows-domain-log |
Clears user connections and unlocks users that have been locked out. |
privileged-level EXEC |
All |
(config-ssl-accelerated) client-cert-verify |
Enables verification of client certificates. |
SSL accelerated service configuration |
All |
(config-ssl-accelerated) client-version-rollback-check |
Disables the client SSL version rollback check. |
SSL accelerated service configuration |
All |
clock |
Manages the system clock. |
privileged-level EXEC |
All |
(config) clock |
Sets the summer daylight saving time of day and time zone. |
global configuration |
All |
cms |
Configures the parameters for the Centralized Management System (CMS) embedded database. |
privileged-level EXEC |
All |
cms secure-store |
Configures secure store encryption |
privileged-level EXEC |
All |
(config) cms |
Schedules the maintenance and enables the Centralized Management System on a specific WAAS device. |
global configuration |
All |
configure* |
Enters configuration mode from privileged EXEC mode. |
privileged-level EXEC |
All |
copy cdrom |
Copies files from a CD-ROM. |
privileged-level EXEC |
All |
copy cdrom wow-recovery |
Recovers Windows on a virtual blade without reloading the software. |
privileged-level EXEC |
All |
copy compactflash |
Copies files from the Compact Flash card. |
privileged-level EXEC |
All |
copy disk |
Copies configuration information or files from a disk. |
privileged-level EXEC |
All |
copy ftp |
Copies files from an FTP server. |
privileged-level EXEC |
All |
copy http |
Copies files from an HTTP server. |
privileged-level EXEC |
All |
copy running-config |
Copies information from the current system configuration. |
privileged-level EXEC |
All |
copy startup-config |
Copies information from the startup configuration. |
privileged-level EXEC |
All |
copy sysreport |
Copies system troubleshooting information. |
privileged-level EXEC |
All |
copy system-status |
Copies the system status for debugging reference. |
privileged-level EXEC |
All |
copy tech-support |
Copies system information for technical support. |
privileged-level EXEC |
All |
copy tftp |
Copies the software image from the TFTP server. |
privileged-level EXEC |
All |
copy usb |
Copies files from an external USB drive. |
privileged-level EXEC |
All |
copy virtual-blade |
Copies software configuration or image data from a virtual blade disk image to an FTP server. |
privileged-level EXEC |
All |
cpfile |
Copies a file to the current directory. |
privileged-level EXEC |
All |
(config-vb) cpu-list |
Configures the CPU assignments that the virtual blade runs on,. |
virtual blade configuration |
application- accelerator |
(config-preposition) credentials |
Sets the username and password credentials. |
preposition configuration |
application- accelerator |
crypto delete |
Removes SSL certificate and key files. |
privileged-level EXEC |
application- accelerator |
crypto export |
Exports SSL certificate and key files. |
privileged-level EXEC |
application- accelerator |
crypto generate |
Generates a self-signed certificate or a certificate signing request. |
privileged-level EXEC |
All |
crypto import |
Imports SSL certificate and key files. |
privileged-level EXEC |
application- accelerator |
crypto pki |
Initializes the PKI managed store. |
privileged-level EXEC |
All |
(config) crypto pki |
Configures public key infrastructure (PKI) encryption parameters. |
global configuration |
All |
(config) crypto ssl |
Configures secure sockets layer (SSL) encryption parameters. |
global configuration |
All |
debug aaa accounting |
Configures AAA accounting debugging. |
privileged-level EXEC |
All |
debug aaa authorization |
Configures AAA authorization debugging. |
privileged-level EXEC |
All |
debug accelerator |
Configures accelerator debugging. |
privileged-level EXEC |
application- accelerator |
debug all |
Configures all debugging. |
privileged-level EXEC |
All |
debug authentication |
Configures authentication debugging. |
privileged-level EXEC |
All |
debug auto-discovery |
Configures auto discovery debugging. |
privileged-level EXEC |
application- accelerator |
debug buf |
Configures buffer manager debugging. |
privileged-level EXEC |
All |
debug cdp |
Configures CDP debugging. |
privileged-level EXEC |
All |
debug cli |
Configures CLI debugging. |
privileged-level EXEC |
All |
debug cms |
Configures CMS debugging. |
privileged-level EXEC |
All |
debug connection |
Configures connection debugging. |
privileged-level EXEC |
application- accelerator |
debug dataserver |
Configures data server debugging. |
privileged-level EXEC |
All |
debug dhcp |
Configures DHCP debugging. |
privileged-level EXEC |
All |
debug directed-mode |
Configures directed mode debugging. |
privileged-level EXEC |
application- accelerator |
debug dre |
Configures DRE debugging. |
privileged-level EXEC |
application- accelerator |
debug egress-method |
Configures egress method debugging. |
privileged-level EXEC |
application- accelerator |
debug filtering |
Configures filtering debugging. |
privileged-level EXEC |
application- accelerator |
debug flow |
Configures network traffic flow debugging. |
privileged-level EXEC |
All |
debug generic-gre |
Configures generic GRE egress method debugging. |
privileged-level EXEC |
application- accelerator |
debug hw-raid |
Configures hardware RAID debugging. |
privileged-level EXEC |
All |
debug inline |
Configures inline debugging. |
privileged-level EXEC |
All |
debug key-manager |
Configures key manager debugging. |
privileged-level EXEC |
central-manager |
debug logging |
Configures logging debugging. |
privileged-level EXEC |
All |
debug monapi |
Configures monitoring API debugging. |
privileged-level EXEC |
central-manager |
debug ntp |
Configures NTP debugging. |
privileged-level EXEC |
All |
debug policy-engine |
Configures policy engine debugging. |
privileged-level EXEC |
All |
debug rbcp |
Configures RBCP debugging. |
privileged-level EXEC |
application- accelerator |
debug rpc |
Configures record remote procedure calls debugging. |
privileged-level EXEC |
All |
debug snmp |
Configures SNMP debugging. |
privileged-level EXEC |
All |
debug standby |
Configures standby debugging. |
privileged-level EXEC |
application- accelerator |
debug statistics |
Configures statistics debugging. |
privileged-level EXEC |
All |
debug synq |
Configures synq debugging. |
privileged-level EXEC |
application- accelerator |
debug tfo |
Configures TFO flow optimization debugging. |
privileged-level EXEC |
application- accelerator |
debug translog |
Configures transaction logging debugging. |
privileged-level EXEC |
application- accelerator |
debug wafs |
Configures WAFS Device Manager debugging. |
privileged-level EXEC |
application- accelerator |
debug wccp |
Configures WCCP information debugging. |
privileged-level EXEC |
application- accelerator |
(config-std-nacl) delete |
Deletes a line from the standard ACL. |
standard ACL configuration |
All |
(config-ext-nacl) delete |
Deletes a line from the extended ACL. |
extended ACL configuration |
All |
delfile |
Deletes a file. |
privileged-level EXEC |
All |
deltree |
Deletes a directory and its subdirectories. |
privileged-level EXEC |
All |
(config-std-nacl) deny |
Adds a line to a standard access list that specifies the type of packets that you want the WAAS device to drop. |
standard ACL configuration |
All |
(config-ext-nacl) deny |
Adds a line to an extended access-list that specifies the type of packets that you want the WAAS device to drop. |
extended ACL configuration |
All |
(config-ca) description |
Configures a description for the certification authority. |
certification authority configuration |
All |
(config-vb) description |
Configures a description for a virtual blade on your WAE. |
virtual blade configuration |
application- accelerator |
(config-ssl-accelerated) description |
Configures a description for SSL accelerated service. |
SSL accelerated service configuration |
All |
(config-vb) device |
Configures the device emulation parameters used by the virtual blade on your WAE. |
virtual blade configuration |
application- accelerator |
(config) device mode |
Specifies the device mode of the WAAS device. |
global configuration |
All |
dir |
Displays the files in a long list format. |
user-level EXEC and privileged-level EXEC |
All |
(config) directed-mode |
Configures the mode by which traffic is sent between two WAEs. |
global configuration |
application- accelerator |
disable |
Turns off the privileged EXEC commands. |
privileged-level EXEC |
All |
disk |
Configures the disks on the WAAS device. |
privileged-level EXEC |
All |
(config-vb) disk |
Configures disk space for a virtual blade on the WAE hard drive. |
virtual blade configuration |
application- accelerator |
(config) disk disk-name |
Disables a RAID-1 disk for online removal. |
global configuration |
All |
(config) disk encrypt |
Enables disk encryption. |
global configuration |
application- accelerator |
(config) disk error-handling |
Configures how the disk errors should be handled. |
global configuration |
All |
(config) disk logical shutdown |
Shuts down the RAID-5 logical disk drive. |
global configuration |
All |
(config) disk object-cache extend |
Enables extended object cache. |
global configuration |
All |
dnslookup |
Resolves a DNS hostname. |
user-level EXEC and privileged-level EXEC |
All |
(config-preposition) dscp |
Setshe DSCP marking value for a preposition task. |
preposition configuration |
application- accelerator |
(config-preposition) duration |
Sets the maximum duration for a preposition task. |
preposition configuration |
application- accelerator |
(config) egress-method |
Configures the egress method for intercepted connections. |
global configuration |
application- accelerator |
enable* |
Accesses the privileged EXEC commands. |
user-level EXEC |
All |
(config-preposition) enable |
Enables or disables a preposition directive. |
preposition configuration |
application- accelerator |
(config-if) encapsulation dot1Q |
Sets the VLAN ID of traffic leaving an inline group interface. |
interface configuration |
application- accelerator |
(config) end |
Exits configuration and privileged EXEC modes. |
global configuration |
All |
(config) exec-timeout |
Configures the length of time that an inactive Telnet or SSH session remains open. |
global configuration |
All |
exit |
Exits from privileged EXEC mode. |
privileged-level EXEC |
All |
(config) exit |
Exits from global configuration mode. |
global configuration |
All |
(config-if) exit |
Exits from interface configuration mode. |
interface configuration |
All |
(config-std-nacl) exit |
Exits from standard ACL configuration mode. |
standard ACL configuration |
All |
(config-ext-nacl) exit |
Exits from extended ACL configuration mode. |
extended ACL configuration |
All |
(config-if) failover timeout |
Configures the maximum time for the inline interface to transition traffic to another port after a failure event. |
interface configuration |
All |
find-pattern |
Searches for a particular pattern in a file. |
privileged-level EXEC |
All |
(config) flow monitor |
Configures network traffic flow monitoring. |
global configuration |
application- accelerator |
(config-if) full-duplex |
Sets the current interface to the full-duplex mode. |
interface configuration |
All |
(config-if) half-duplex |
Sets the current interface to half-duplex mode. |
interface configuration |
All |
help |
Provides assistance for the WAAS command-line interface in EXEC mode. |
user-level EXEC and privileged-level EXEC |
All |
(config) help |
Provides assistance for the WAAS command-line interface. |
global configuration |
All |
(config) hostname |
Configures the hostname of the WAAS device in global configuration mode. |
global configuration |
All |
(config-preposition) ignore-hidden-dir |
Configures to ignore hidden directories in the set of files to be prepositioned. |
preposition configuration |
application- accelerator |
(config) inetd |
Enables FTP, RCP, and TFTP services. |
global configuration |
All |
(config) inline |
Configures the ports on an interface module to operate in inline mode. |
global configuration |
application- accelerator |
(config-if) inline |
Configures inline interception for an inlineGroup interface. |
interface configuration |
All |
(config) inline vlan-id-connection-check |
Enables VLAN ID checking on intercepted traffic. |
global configuration |
application- accelerator |
(config-ssl-accelerated) inservice |
Enables the accelerated service. |
SSL accelerated service configuration |
All |
install |
Installs a new image into Flash memory. |
privileged-level EXEC |
All |
(config) interception access-list |
Configures an interception access list. |
global configuration |
All |
(config-vb) interface |
Bridges a virtual blade interface to an interface on your WAE. |
virtual blade configuration |
application- accelerator |
(config) interface bvi* |
Configures a bridge virtual interface for use by a virtual blade. |
global configuration |
application- accelerator |
(config) interface GigabitEthernet* |
Configures a Gigabit Ethernet interface. Provides access to interface configuration mode. |
global configuration |
All |
(config) interface InlineGroup* |
Configures a Inline Group channel, or standby interface. Provides access to interface configuration mode. |
global configuration |
All |
(config) interface PortChannel* |
Configures a port channel interface. Provides access to interface configuration mode. |
global configuration |
All |
(config) interface standby* |
Configures a standby interface. Provides access to interface configuration mode. |
global configuration |
All |
(config) interface TenGigabitEthernet* |
Configures a 10-Gigabit Ethernet interface. Provides access to interface configuration mode. |
global configuration |
All |
(config) interface virtual* |
Configures a virtual interface. Provides access to interface configuration mode. |
global configuration |
All |
(config) ip |
Configures the initial network device configuration settings (for example, the IP address of the default gateway) on a WAAS device. |
global configuration |
All |
(config-if) ip |
Configures the IP address, subnet mask, or DHCP IP address negotiation on the interface of the WAAS device or inline module. |
interface configuration |
All |
(config-if) ip access-group |
Controls the connections on a specific interface by applying a predefined access list. |
interface configuration |
All |
(config) ip access-list* |
Creates and modifies the access lists for controlling access to interfaces or applications. Provides access to ACL configuration mode. |
global configuration |
All |
(config) ip icmp rate-limit unreachable |
Limits the rate at which Internet Control Message Protocol (ICMP) destination unreachable messages are generated. |
global configuration |
All |
(config) ip unreachables df |
Enables the IP unreachable ICMP service. |
global configuration |
All |
(config) kerberos |
Configures user authentication against a Kerberos database. |
global configuration |
All |
(config) kernel kdb |
Enables the kernel debugger configuration mode. |
global configuration |
All |
(config) kernel kdump enable |
Enables the kernel crash dump mechanism. |
global configuration |
All |
less |
Displays the contents of a file using the LESS application. |
user-level EXEC and privileged-level EXEC |
All |
license add |
Adds a software license. |
privileged-level EXEC |
All |
(config) line |
Specifies the terminal line settings. |
global configuration |
All |
(config-std-nacl) list |
Displays a list of specified entries within the standard ACL |
standard ACL configuration |
All |
(config-ext-nacl) list |
Displays a list of specified entries within the extended ACL |
extended ACL configuration |
All |
lls |
Displays the files in a long list format. |
user-level EXEC and privileged-level EXEC |
All |
(config) logging console |
Configures system logging (syslog) to the console. |
global configuration |
All |
(config) logging disk |
Configures system logging (syslog) to a disk file. |
global configuration |
All |
(config) logging facility |
Sets the facility parameter for system logging (syslog). |
global configuration |
All |
(config) logging host |
Configures system logging (syslog) to a remote host. |
global configuration |
All |
ls |
Lists the files and subdirectories in a directory on the device hard disk. |
user-level EXEC and privileged-level EXEC |
All |
lsusb |
Lists the files and subdirectories in a directory on a USB storage device. |
user-level EXEC and privileged-level EXEC |
All |
(config-ssl-global) machine-cert-key |
Configurea a certificate and private key. |
SSL global service configuration |
All |
(config-preposition) max-cache |
Sets the maximum cache percentage that prepositioned files can use. |
preposition configuration |
application- accelerator |
(config-preposition) max-file-size |
Sets the maximum size of a prepositioned file. |
preposition configuration |
application- accelerator |
(config-vb) memory |
Configures memory for a virtual blade from the WAE system. |
virtual blade configuration |
application- accelerator |
(config-preposition) min-file-size |
Sets the minimum size of a prepositioned file. |
preposition configuration |
application- accelerator |
mkdir |
Makes a directory. |
privileged-level EXEC |
All |
mkfile |
Makes a file (for testing). |
privileged-level EXEC |
All |
(config-std-nacl) move |
Moves a line to a new position within the standard ACL |
standard ACL configuration |
All |
(config-ext-nacl) move |
Moves a line to a new position within the extended ACL |
extended ACL configuration |
All |
(config-if) mtu |
Sets the interface Maximum Transmission Unit (MTU) packet size. |
interface configuration |
All |
(config-preposition) name |
Sets the name of a preposition directive. |
preposition configuration |
application- accelerator |
(config) ntp |
Configures the NTP server. |
global configuration |
All |
ntpdate |
Sets the NTP server name. |
privileged-level EXEC |
All |
(config-pki-global-settings) ocsp |
Configures the URL to be used as the global settings for the Online Certificate Status Protocol (OCSP) protocol revocation status checking. |
PKI global-settings configuration |
All |
(config-preposition) pattern |
Sets a file filter for a preposition directive. |
preposition configuration |
application- accelerator |
(config) peer |
Enables/disables peer optimization. |
global configuration |
application- accelerator |
(config-ssl-peering) peer-cert-verify |
Enables verification of peer certificates. |
SSL host peering service configuration |
All |
(config-ssl-mgmt) peer-cert-verify |
Enables verification of peer certificates. |
SSL management service configuration |
All |
(config-std-nacl) permit |
Adds a line to a standard access list that specifies the type of packets that you want the WAAS device to permit for further processing. |
standard ACL configuration |
All |
(config-ext-nacl) permit |
Adds a line to an extended access list that specifies the type of packets that you want the WAAS device to permit for further processing. |
extended ACL configuration |
All |
ping |
Sends the echo packets. |
user-level EXEC and privileged-level EXEC |
All |
(config) policy-engine application classifier |
Defines a WAE's application policy and assigns the policy a name, a classifier, and a policy map. |
global configuration |
application- accelerator |
(config) policy-engine application map adaptor EPM |
Configures a WAE's application policy with advanced policy map lists of the EndPoint Mapper (EPM) service. |
global configuration |
application- accelerator |
(config) policy-engine application map basic |
Deletes a specific basic (static) application policy map from the WAE's list of application policy maps. |
global configuration |
application- accelerator |
(config) policy-engine application map other optimize DRE |
Configures the WAE's optimize DRE command action for nonclassified traffic. |
global configuration |
application- accelerator |
(config) policy-engine application map other optimize full |
Configures the application policy for nonclassified traffic with the optimize full command action. |
global configuration |
application- accelerator |
(config) policy-engine application map other pass-through |
Configures the application policy for nonclassified traffic with the pass-through command action. |
global configuration |
application- accelerator |
(config) policy-engine application name |
Creates a new application definition that specifies general information about an application. |
global configuration |
application- accelerator |
(config) policy-engine application set-dscp |
Sets the default DSCP marking value. |
global configuration |
application- accelerator |
(config) policy-engine config |
Removes all of the application policy configuration or restores the application policy factory defaults on a WAE. |
global configuration |
application- accelerator |
(config) port-channel |
Configures the port channel load-balancing options. |
global configuration |
All |
(config) primary-interface |
Configures a primary interface for the WAAS device. |
global configuration |
All |
(config) radius-server |
Enables and disables WAAS print services and configures an administrative group. |
global configuration |
All |
pwd |
Displays the present working directory. |
user-level EXEC and privileged-level EXEC |
All |
(config) radius-server |
Configures the RADIUS parameters on a WAAS device. |
global configuration |
All |
(config-preposition) recursive |
Enables or disables recursion for a preposition directive. |
preposition configuration |
application- accelerator |
reload |
Halts a device and performs a cold restart. |
privileged-level EXEC |
All |
rename |
Renames a file. |
privileged-level EXEC |
All |
restore |
Restores a device to its manufactured default status. |
privileged-level EXEC |
All |
(config-ca) revocation-check |
Configures the certification authority revocation checking method. |
certification authority configuration |
All |
(config-pki-global-settings) revocation-check |
Configures the the global settings revocation checking method. |
PKI global-settings configuration |
All |
rmdir |
Removes a directory. |
privileged-level EXEC |
All |
(config-preposition) root |
Sets the root directory for a preposition directive. |
preposition configuration |
application- accelerator |
(config-preposition) scan-type |
Sets the file scanning type for a preposition directive. |
preposition configuration |
application- accelerator |
(config-preposition) schedule |
Sets the schedule for a preposition directive. |
preposition configuration |
application- accelerator |
scp |
Specifies the SCP client. |
privileged-level EXEC |
All |
script |
Checks the errors in a script or executes a script. |
privileged-level EXEC |
All |
(config-preposition) server |
Sets the file server for a preposition directive. |
preposition configuration |
application- accelerator |
(config-ssl-accelerated) server-cert-key |
Configures a certificate and private key. |
SSL accelerated service configuration |
All |
(config-ssl-accelerated) server-cert-verify |
Enables verification of server certificates. |
SSL accelerated service configuration |
All |
(config-ssl-accelerated) server-domain |
Configures the accelerated server domain and TCP port. |
SSL accelerated service configuration |
All |
(config-ssl-accelerated) server-ip |
Configures the accelerated server IP address and TCP port. |
SSL accelerated service configuration |
All |
(config-ssl-accelerated) server-name |
Configures the accelerated server hostname and TCP port. |
SSL accelerated service configuration |
All |
setup |
Configures the basic configuration settings. Invokes the interactive setup utility. |
privileged-level EXEC |
All |
show aaa accounting |
Displays the AAA accounting configuration. |
user-level EXEC and privileged-level EXEC |
All |
show aaa authorization |
Displays the AAA authorization configuration. |
user-level EXEC and privileged-level EXEC |
All |
show accelerator |
Displays the status and configuration of the application accelerators. |
privileged-level EXEC |
application- accelerator |
show alarms |
Displays information on various types of alarms, their status, and history. |
privileged-level EXEC |
All |
show arp |
Displays the ARP entries. |
privileged-level EXEC |
All |
show authentication |
Displays the authentication configuration. |
user-level EXEC and privileged-level EXEC |
All |
show auto-discovery |
Displays auto-discovery information for a WAE. |
user-level EXEC and privileged-level EXEC |
application- accelerator |
show auto-register |
Displays the status of the autoregistration feature for a WAE. |
privileged-level EXEC |
application- accelerator |
show banner |
Displays the message of the day, login, and EXEC banner settings. |
privileged-level EXEC |
All |
show bypass |
Displays the bypass configuration of a WAE. |
user-level EXEC and privileged-level EXEC |
application- accelerator |
show bmc |
Displays the Baseboard Management Controller information. |
user-level EXEC and privileged-level EXEC |
application- accelerator |
show cache http-metadatacache |
Displays HTTP metadata cache information. |
privileged-level EXEC |
application- accelerator |
show cdp |
Displays the CDP configuration. |
privileged-level EXEC |
All |
show clock |
Displays the system clock. |
user-level EXEC and privileged-level EXEC |
All |
show cms |
Displays the management service information. |
privileged-level EXEC |
All |
show cms secure-store |
Displays the secure disk encryption status. |
privileged-level EXEC |
All |
show crypto |
Displays crypto layer information. |
user-level EXEC and privileged-level EXEC |
All |
show debugging |
Displays the state of each debugging option. |
privileged-level EXEC |
All |
show device-id |
Displays the device ID. |
user-level EXEC and privileged-level EXEC |
All |
show device-mode |
Displays the device mode. |
privileged-level EXEC |
All |
show directed-mode |
Displays directed mode information. |
user-level EXEC and privileged-level EXEC |
application- accelerator |
show disks |
Displays the disk configurations. |
user-level EXEC and privileged-level EXEC |
All |
show egress-methods |
Displays the egress method that is configured and that is being used on a particular WAE. |
user-level EXEC and privileged-level EXEC |
application- accelerator |
show filtering list |
Displays TFO flow information for a WAE. |
privileged-level EXEC |
application- accelerator |
show flash |
Displays the flash memory information. |
privileged-level EXEC |
All |
show hardware |
Displays the system hardware information. |
privileged-level EXEC |
All |
show hosts |
Displays the IP domain name, name servers, IP addresses, and host table. |
user-level EXEC and privileged-level EXEC |
All |
show inetd |
Displays the status of TCP/IP services. |
privileged-level EXEC |
All |
show interface |
Displays the hardware interface information. |
privileged-level EXEC |
All |
show inventory |
Displays the system inventory information. |
privileged-level EXEC |
All |
show ip access-list |
Displays the information about access lists that are defined and applied to specific interfaces or applications. |
privileged-level EXEC |
All |
show ip routes |
Displays the IP routing table. |
privileged-level EXEC |
All |
show kdump |
Displays the kernel crash dump information. |
privileged-level EXEC |
All |
show kerberos |
Displays the Kerberos authentication configuration. |
user-level EXEC and privileged-level EXEC |
All |
show key-manager |
Displays the key manager information for a WAAS device. |
privileged-level EXEC |
All |
show license |
Displays the license information. |
privileged-level EXEC |
All |
show logging |
Displays the system logging configuration. |
user-level EXEC and privileged-level EXEC |
All |
show memory |
Displays the memory blocks and statistics. |
privileged-level EXEC |
All |
show ntp |
Displays the NTP configuration status. |
user-level EXEC and privileged-level EXEC |
All |
show peer optimization |
Displays the configured serial peers for a WAE. |
privileged-level EXEC |
application- accelerator |
show policy-engine application |
Displays the display application policy information. |
user-level EXEC and privileged-level EXEC |
application- accelerator |
show policy-engine status |
Displays the policy-engine high-level information. This information includes the usage of the available resources, which include application names, classifiers, and conditions. |
user-level EXEC and privileged-level EXEC |
application- accelerator |
show processes |
Displays the process status. |
privileged-level EXEC |
All |
show radius-server |
Displays the RADIUS server information. |
user-level EXEC and privileged-level EXEC |
All |
show running-config |
Displays the current operating configuration. |
privileged-level EXEC |
All |
show services |
Displays information related to services. |
privileged-level EXEC |
All |
show smb-conf |
Displays the smb-conf configurations. |
privileged-level EXEC |
All |
show snmp |
Displays the SNMP statistics. |
user-level EXEC and privileged-level EXEC |
All |
show ssh |
Displays the status and configuration of the Secure Shell (SSH) service. |
privileged-level EXEC |
All |
show startup-config |
Displays the startup configuration. |
privileged-level EXEC |
All |
show statistics accelerator |
Displays the application accelerator statistics information. |
privileged-level EXEC |
application- accelerator |
show statistics aoim |
Displays AO (accelerator) Information Manager statistics. |
privileged-level EXEC |
application- accelerator |
show statistics application |
Displays the status of the application statistics. |
privileged-level EXEC |
All |
show statistics authentication |
Displays the authentication statistics. |
user-level EXEC and privileged-level EXEC |
All |
show statistics auto-discovery |
Displays TFO auto-discovery statistics for a WAE. |
user-level EXEC and privileged-level EXEC |
application- accelerator |
show statistics cifs |
Displays the CIFS statistics information. |
user-level EXEC and privileged-level EXEC |
application- accelerator |
show statistics connection |
Displays the connection statistics for a WAE. |
privileged-level EXEC |
application- accelerator |
show statistics connection auto-discovery |
Displays the auto-discovery connection statistics for a WAE. |
privileged-level EXEC |
application- accelerator |
show statistics connection closed |
Displays the closed connection statistics for a WAE. |
privileged-level EXEC |
application- accelerator |
show statistics connection conn-id |
Displays the connection ID statistics for a WAE. |
privileged-level EXEC |
application- accelerator |
show statistics connection egress-methods |
Displays detailed egress method-related information about the connection segments for a WAE. |
privileged-level EXEC |
application- accelerator |
show statistics connection optimized |
Displays optimized information about the connection segments for a WAE. |
privileged-level EXEC |
application- accelerator |
show statistics connection pass-through |
Displays pass through information about the connection segments for a WAE. |
privileged-level EXEC |
application- accelerator |
show statistics crypto ssl ciphers |
Displays crypto SSL cipher usage statistics. |
privileged-level EXEC |
application- accelerator |
show statistics datamover |
Displays internal datamover information. |
user-level EXEC and privileged-level EXEC |
application- accelerator |
show statistics directed-mode |
Displays directed mode statistics. |
user-level EXEC and privileged-level EXEC |
application- accelerator |
show statistics dre |
Displays the Data Redundancy Elimination (DRE) statistics for a WAE. |
privileged-level EXEC |
application- accelerator |
show statistics filtering |
Displays TFO flow statistics for a WAE. |
user-level EXEC and privileged-level EXEC |
application- accelerator |
show statistics flow |
Displays the flow statistics. |
user-level EXEC and privileged-level EXEC |
application- accelerator |
show statistics generic-gre |
Displays the generic GRE tunnel statistics. |
user-level EXEC and privileged-level EXEC |
application- accelerator |
show statistics icmp |
Displays the ICMP statistics. |
user-level EXEC and privileged-level EXEC |
All |
show statistics ip |
Displays the IP statistics. |
user-level EXEC and privileged-level EXEC |
All |
show statistics netstat |
Displays the Internet socket connection statistics. |
user-level EXEC and privileged-level EXEC |
All |
show statistics pass-through |
Displays the pass-through statistics. |
privileged-level EXEC |
application- accelerator |
show statistics peer |
Displays the DRE peer statistics for a WAE. |
privileged-level EXEC |
application- accelerator |
show statistics radius |
Displays the RADIUS authentication statistics. |
user-level EXEC and privileged-level EXEC |
All |
show statistics services |
Displays the services statistics. |
user-level EXEC and privileged-level EXEC |
All |
show statistics snmp |
Displays the SNMP statistics. |
user-level EXEC and privileged-level EXEC |
All |
show statistics synq |
Displays statistics for the SynQ module. |
user-level EXEC and privileged-level EXEC |
application- accelerator |
show statistics tacacs |
Displays the TACACS+ authentication and authorization statistics. |
user-level EXEC and privileged-level EXEC |
All |
show statistics tcp |
Displays the Transmission Control Protocol statistics. |
user-level EXEC and privileged-level EXEC |
All |
show statistics tfo |
Displays the Transport Flow Optimization (TFO) statistics for a WAE. |
user-level EXEC and privileged-level EXEC |
application- accelerator |
show statistics udp |
Displays the User Datagram Protocol (UDP) statistics. |
user-level EXEC and privileged-level EXEC |
All |
show statistics vn-service vpath |
Displays the VPATH statistics for a vWAAS device. |
user-level EXEC and privileged-level EXEC |
All |
show statistics wccp |
Displays the WCCP statistics for a WAE. |
user-level EXEC and privileged-level EXEC |
application- accelerator |
show statistics windows-domain |
Displays the Windows domain configuration. |
user-level EXEC and privileged-level EXEC |
All |
show statistics windows-print requests |
Displays the Windows print accelerator statistics. |
user-level EXEC and privileged-level EXEC |
application- accelerator |
show synq list |
Displays connections for the SynQ module. |
privileged-level EXEC |
application- accelerator |
show sysfs volumes |
Displays the system file system (SYSFS) information. |
user-level EXEC and privileged-level EXEC |
All |
show tacacs |
Displays the TACACS+ configuration. |
user-level EXEC and privileged-level EXEC |
All |
show tcp |
Displays the TCP configuration. |
user-level EXEC and privileged-level EXEC |
All |
show tech-support |
Displays the system information for Cisco technical support. |
privileged-level EXEC |
All |
show telnet |
Displays the Telnet services configuration. |
privileged-level EXEC |
All |
show tfo tcp |
Displays TFO TCP buffer information. |
privileged-level EXEC |
application- accelerator |
show transaction-logging |
Displays the transaction logging information for a WAE. |
user-level EXEC and privileged-level EXEC |
application- accelerator |
show user |
Displays information about a particular user. |
privileged-level EXEC |
All |
show users administrative |
Displays the administrative users. |
user-level EXEC and privileged-level EXEC |
All |
show version |
Displays the software version. |
user-level EXEC and privileged-level EXEC |
All |
show virtual-blade |
Displays virtual blade information on your WAE device. |
privileged-level EXEC |
application- accelerator |
show wccp |
Displays the WCCP information for a WAE. |
user-level EXEC and privileged-level EXEC |
application- accelerator |
show windows-domain |
Displays the Windows domain configuration. |
user-level EXEC and privileged-level EXEC |
All |
(config-if) shutdown |
Shuts down the specified interface. |
interface configuration |
All |
shutdown |
Shuts down the device (stops all applications and operating system). |
privileged-level EXEC |
All |
(config) smb-conf |
Manually configures parameters in the Samba configuration file, smb-conf. |
global configuration |
All |
(config) snmp-server access-list |
Configures an access control list to allow access through an SNMP agent. |
global configuration |
All |
(config) snmp-server community |
Enables SNMP; sets the community string, optionally names the group, and enables the read-write access with the community string. |
global configuration |
All |
(config) snmp-server contact |
Specifies the text for the system contact MIB object. |
global configuration |
All |
(config) snmp-server enable traps |
Enables the SNMP traps. |
global configuration |
All |
(config) snmp-server group |
Defines a user security model group. |
global configuration |
All |
(config) snmp-server host |
Specifies the hosts to receive SNMP traps. |
global configuration |
All |
(config) snmp-server location |
Specifies the path for MIB object sysLocation. |
global configuration |
All |
(config) snmp-server mib |
Configures the persistence for the SNMP Event MIB. |
global configuration |
All |
(config) snmp-server notify inform |
Configures the SNMP inform request. |
global configuration |
All |
(config) snmp-server trap-source |
Configures the SNMP trap source. |
global configuration |
All |
(config) snmp-server user |
Defines a user who can access the SNMP engine. |
global configuration |
All |
(config) snmp-server view |
Defines an SNMPv2 MIB view. |
global configuration |
All |
snmp trigger |
Creates or deletes SNMP triggers on a MIB variable. |
privileged-level EXEC |
All |
ssh |
Allows secure encrypted communications between an untrusted client machine and a WAAS device over an insecure network. |
user-level EXEC and privileged-level EXEC |
All |
(config) sshd |
Configures the parameters for the Secure Shell (SSH) service. |
global configuration |
All |
(config) ssh-key-generate |
Generates a SSH host key. |
global configuration |
All |
(config-if) standby |
Configures an interface to be a backup for another interface. |
interface configuration |
All |
(config) tacacs |
Configures the TACACS+ parameters on a WAAS device. |
global configuration |
All |
(config) tcp |
Configures the TCP parameters. |
global configuration |
All |
tcpdump |
Dumps the TCP traffic on the network. |
privileged-level EXEC |
All |
telnet |
Starts the Telnet client. |
user-level EXEC and privileged-level EXEC |
All |
(config) telnet enable |
Enables the Telnet services. |
global configuration |
All |
terminal |
Sets the terminal output commands. |
user-level EXEC and privileged-level EXEC |
All |
test |
Performs diagnostic tests and displays the results. |
user-level EXEC and privileged-level EXEC |
All |
tethereal |
Analyzes network traffic from the command line. |
privileged-level EXEC |
All |
(config) tfo exception |
Configures TFO exception handling. |
global configuration |
application- accelerator |
(config) tfo optimize |
Configures TFO optimization for DRE or full generic optimization on the WAE. |
global configuration |
application- accelerator |
(config) tfo tcp adaptive-buffer-sizing |
Configures TFO optimization with TCP adaptive buffer sizing. |
global configuration |
application- accelerator |
(config) tfo tcp keepalive |
Configures TFO optimization with a TCP keepalive on a WAE. |
global configuration |
application- accelerator |
(config) tfo tcp optimized-mss |
Configures TFO optimization with an optimized-side TCP maximum segment size on a WAE. |
global configuration |
application- accelerator |
(config) tfo tcp optimized-receive-buffer |
Configures TFO optimization with an optimized-side receive buffer on a WAE. |
global configuration |
application- accelerator |
(config) tfo tcp optimized-send-buffer |
Configures TFO optimization with an optimized-side send buffer on a WAE. |
global configuration |
application- accelerator |
(config) tfo tcp original-mss |
Configures TFO optimization with an unoptimized-side TCP maximum segment size on the WAE. |
global configuration |
application- accelerator |
(config) tfo tcp original-receive-buffer |
Configures TFO optimization with an unoptimized-side receive buffer on a WAE. |
global configuration |
application- accelerator |
(config) tfo tcp original-send-buffer |
Configures TFO optimization with an unoptimized-side send buffer on a WAE. |
global configuration |
application- accelerator |
top |
Displays the current top CPU activities. |
privileged-level EXEC |
All |
traceroute |
Traces the route to a remote host. |
user-level EXEC and privileged-level EXEC |
All |
transaction-log |
Forces the transaction logging for TFO and export on a WAE. |
privileged-level EXEC |
application- accelerator |
(config) transaction-logs |
Configures the transaction logging on a WAE. |
global configuration |
application- accelerator |
type |
Displays a file. |
user-level EXEC and privileged-level EXEC |
All |
type-tail |
Displays the last several lines of a file. |
user-level EXEC and privileged-level EXEC |
All |
(config) username |
Establishes the username authentication. |
global configuration |
All |
(config-ssl-accelerated) version |
Specifies the type of SSL protocol to use for accelerated services. |
SSL accelerated service configuration |
All |
(config-ssl-global) version |
Specifies the type of SSL protocol to use for global services. |
SSL global service configuration |
All |
(config-ssl-peering) version |
Specifies the type of SSL protocol to use for management services. |
SSL host peering service configuration |
All |
(config-ssl-mgmt) version |
Specifies the type of SSL protocol to use for management services. |
SSL management service configuration |
All |
virtual-blade |
Executes general operations on a virtual blade. |
privileged-level EXEC |
application- accelerator |
(config) virtual-blade |
Configures virtual blades on your WAE device. |
global configuration |
All |
vm |
Initializes the virtual machine, and configures the host clock sync setting. |
privileged-level EXEC |
application- accelerator |
(config) vn-service vpath |
Enables or disables VPATH interception for a vWAAS device. |
global configuration |
All |
(config-vb) vnc |
Enables or disables the VNC server for the virtual blade on your WAE. |
virtual blade configuration |
application- accelerator |
(config) wccp access-list |
Configures the IP access list for inbound Web Cache Coordination Protocol (WCCP) GRE-encapsulated traffic on a WAE. |
global configuration |
application- accelerator |
(config) wccp flow-redirect |
Enables the WCCP flow redirection on a WAE. |
global configuration |
application- accelerator |
(config) wccp router-list |
Creates a router list on a WAE for use in the WCCP Version 2 services. |
global configuration |
application- accelerator |
(config) wccp shutdown |
Sets the maximum time interval after which the WAE will perform a clean shut down. |
global configuration |
application- accelerator |
(config) wccp tcp-promiscuous mask |
Configures the TCP promiscuous mode service mask on a WAE. |
global configuration |
application- accelerator |
(config) wccp tcp-promiscuous router-list-num |
Configures the TCP promiscuous mode service router list on a WAE. |
global configuration |
application- accelerator |
(config) wccp tcp-promiscuous service-pair |
Configures the TCP promiscuous mode service IDs on a WAE. |
global configuration |
application- accelerator |
(config) wccp version |
Specifies the WCCP version number. |
global configuration |
application- accelerator |
whoami |
Displays the name of the current user. |
user-level EXEC and privileged-level EXEC |
All |
windows-domain |
Accesses Windows domain utilities. |
privileged-level EXEC |
All |
(config) windows-domain |
Configures Windows domain server options. |
global configuration |
All |
write |
Writes or erases the startup configurations to NVRAM or to a terminal session, or writes the MIB persistence configuration to disk. |
privileged-level EXEC |
All |