SSL Accelerated Service Configuration Mode Commands


SSL accelerated services lets you enable and configure SSL acceleration on your WAAS system, and define services to be accelerated on the SSL path. To configure secure socket layer (SSL) encryption accelerated services on a WAAS device, use the crypto ssl services accelerated-service global configuration command. To delete a parameter use the no form of the command.

crypto ssl service accelerated-service service-name

no crypto ssl service accelerated-service service-name

Syntax Description

service-name

Name of the accelerated service that you want to create or edit. The service list name may contain up to 128 characters.


Defaults

No default behavior or values.

Command Modes

global configuration

Device Modes

application-accelerator

central-manager

Usage Guidelines

Use the crypto ssl services accelerated-service command to add and configure an accelerated service. The crypto ssl services accelerated-service command initiates accelerated service configuration mode, as indicated by the following prompt:

WAE(config-ssl-accelerated)#
 
   

Within SSL accelerated service configuration mode, you can use SSL accelerated service configuration commands. To return to global configuration mode, enter exit at the accelerated service configuration mode prompt.

Examples

The following example shows how to create or edit an accelerated service called myservice. If the service is already established on the WAAS device, the crypto ssl services accelerated-service command edits it. If the service does not exist, the crypto ssl services accelerated-service command creates it:

WAE(config)# crypto ssl services accelerated-service myservice
WAE(config-ssl-accelerated)# exit
WAE(config)# 
 
   

Related Commands

(config-ssl-accelerated) cipher-list

(config-ssl-accelerated) client-cert-verify

(config-ssl-accelerated) client-version-rollback-check

(config-ssl-accelerated) description

(config-ssl-accelerated) inservice

(config-ssl-accelerated) server-cert-key

(config-ssl-accelerated) server-cert-verify

(config-ssl-accelerated) server-domain

(config-ssl-accelerated) server-ip

(config-ssl-accelerated) server-name

(config-ssl-accelerated) version

(config-ssl-accelerated) cipher-list

To configure secure socket layer (SSL) encryption cipher lists on a WAAS device, use the cipher-list command. To delete a cipher list use the no form of the command.

cipher-list cipher-list-name

no cipher-list cipher-list-name

Syntax Description

cipher-list-name

Name of the cipher list you want to create or edit. The cipher list name may contain up to 64 characters.


Defaults

No default behavior or values.

Command Modes

SSL accelerated service configuration

Device Modes

application-accelerator

central-manager

Usage Guidelines

A cipher list is customer list of cipher suites that you assign to an SSL connection. (See the SSL Cipher List Configuration Mode Commands chapter for more information.)

Examples

The following example shows how to enter SSL accelerated service configuration mode, and then create or edit a cipher list called myciphers. If the cipher list is already established on the WAAS device, the cipher-list command edits it. If the cipher list does not exist, the cipher-list command creates it:

WAE(config)# crypto ssl services accelerated-service myservice
WAE(config-ssl-accelerated)# cipher-list myciphers
 
   

Related Commands

(config) crypto ssl

(config-ssl-accelerated) client-cert-verify

To enable verification of client certificates, use the client-cert-verify command.

client-cert-verify [revocation-check none]

Syntax Description

revocation-check none

(Optional) Specifies a revocation check null method that returns revocation success.


Defaults

No default behavior or values.

Command Modes

SSL accelerated service configuration

Device Modes

application-accelerator

central-manager

Usage Guidelines

If the server and client devices are using self-signed certificates and certificate verification is enabled, WAAS devices will not be able to accelerate SSL traffic.

To disable OCSP certificate revocation checking, set the revocation check value to none.

Examples

The following example shows how to enter SSL accelerated service configuration mode, and then set the revocation check method to none:

WAE(config)# crypto ssl services accelerated-service myservice
WAE(config-ssl-accelerated)# client-cert-verify revocation-check none
 
   

Related Commands

(config) crypto ssl

(config-ssl-accelerated) client-version-rollback-check

To disable the client SSL version rollback check, use the client-version-rollback-check command.

client-version-rollback-check disable

Syntax Description

disable

Disables the client SSL version rollback check.


Defaults

No default behavior or values.

Command Modes

SSL accelerated service configuration

Device Modes

application-accelerator

central-manager

Usage Guidelines

If a non-RFC 2246 compliant client passes the incorrect client version in the SSL message, a bad record MAC SSL handshake failure may occur. The SSL accelerator terminates such connections. In this case, you can disable the client version rollback check which allows these connections to be optimized.

Examples

The following example shows how to enter SSL accelerated service configuration mode, and then disable the client SSL version rollback check:

WAE(config)# crypto ssl services accelerated-service myservice
WAE(config-ssl-accelerated)# client-version-rollback-check disable
 
   

Related Commands

(config) crypto ssl

(config-ssl-accelerated) description

To add a description of the SSL accelerated service, use the description command.

description description

Syntax Description

description

String that is the description of the SSL accelerated service.


Defaults

No default behavior or values.

Command Modes

SSL accelerated service configuration

Device Modes

application-accelerator

central-manager

Examples

The following example shows how to enter SSL accelerated service configuration mode, and then a description of the accelerated service:

WAE(config)# crypto ssl services accelerated-service myservice
WAE(config-ssl-accelerated)# description SSL accelerated service
 
   

Related Commands

(config) crypto ssl

(config-ssl-accelerated) inservice

To enable the accelerated service, use the inservice command.

inservice

Syntax Description

This command has no arguments or keywords.

Defaults

No default behavior or values.

Command Modes

SSL accelerated service configuration

Device Modes

application-accelerator

central-manager

Examples

The following example shows how to enter SSL accelerated service configuration mode, and then enable the accelerated service:

WAE(config)# crypto ssl services accelerated-service myservice
WAE(config-ssl-accelerated)# inservice
 
   

Related Commands

(config) crypto ssl

(config-ssl-accelerated) protocol-chaining enable

To enable the accelerated service, use the protocol-chaining enable command. To disable this accelerated service, use the no form of this command.

protocol-chaining enable

Syntax Description

This command has no arguments or keywords.

Defaults

By default, protocol chaining is enabled.

Command Modes

SSL accelerated service configuration

Device Modes

application-accelerator

Examples

The following example shows how to enter SSL accelerated service configuration mode, and then enable the protocol chaining:

WAE(config)# crypto ssl services accelerated-service myservice
WAE(config-ssl-accelerated)# protocol-chaining enable
 
   

(config-ssl-accelerated) server-cert-key

To configure a certificate and private key, use the server-cert-key command.

server-cert-key filename

Syntax Description

filename

Filename of the certificate and key. Must be in PKCS#12 and have a ".p12" extension.


Defaults

No default behavior or values.

Command Modes

SSL accelerated service configuration

Device Modes

application-accelerator

central-manager

Examples

The following example shows how to enter SSL accelerated service configuration mode, and then import a certificate and key:

WAE(config)# crypto ssl services accelerated-service myservice
WAE(config-ssl-accelerated)# server-cert-key cert.p12
 
   

Related Commands

(config) crypto ssl

(config-ssl-accelerated) server-cert-verify

To enable verification of server certificates, use the server-cert-verify command.

server-cert-verify [revocation-check none]

Syntax Description

revocation-check none

(Optional) Specifies a revocation check null method that returns revocation success.


Defaults

No default behavior or values.

Command Modes

SSL accelerated service configuration

Device Modes

application-accelerator

central-manager

Usage Guidelines

If the server and client devices are using self-signed certificates and certificate verification is enabled, WAAS devices will not be able to accelerate SSL traffic.

To disable OCSP certificate revocation checking, set the revocation check value to none.

Examples

The following example shows how to enter SSL accelerated service configuration mode, and then set the revocation check method to none:

WAE(config)# crypto ssl services accelerated-service myservice
WAE(config-ssl-accelerated)# server-cert-verify revocation-check none
 
   

Related Commands

(config) crypto ssl

(config-ssl-accelerated) server-domain

To configure the accelerated server domain and TCP port, use the server-domain command.

server-domain srv-domain {port port-no}

Syntax Description

server-domain srv-domain

Specifies the domain name of the accelerated server starting with the characters "*.". 255 alphanumeric characters maximum, 63 characters per label/segment.

port port-no

Specifies the port number of the accelerated server. Range is 1 to 65535.


Defaults

No default behavior or values.

Command Modes

SSL accelerated service configuration

Device Modes

application-accelerator

central-manager

Examples

The following example shows how to enter SSL accelerated service configuration mode, and then set the accelerated server domain name and port:

WAE(config)# crypto ssl services accelerated-service myservice
WAE(config-ssl-accelerated)# server-domain 2.2.2.2 port 1
 
   

Related Commands

(config) crypto ssl

(config-ssl-accelerated) server-ip

To configure the accelerated server IP address and TCP port, use the server-ip command.

server-ip ip-address {port port-no}

Syntax Description

server-ip ip-address

Specifies the IP address of the accelerated server.

port port-no

Specifies the port number of the accelerated server. Range is 1 to 65535.


Defaults

No default behavior or values.

Command Modes

SSL accelerated service configuration

Device Modes

application-accelerator

central-manager

Examples

The following example shows how to enter SSL accelerated service configuration mode, and then set the accelerated server IP address and port:

WAE(config)# crypto ssl services accelerated-service myservice
WAE(config-ssl-accelerated)# server-ip 2.2.2.2 port 1
 
   

Related Commands

(config) crypto ssl

(config-ssl-accelerated) server-name

To configure the accelerated server hostname and TCP port, use the server-name command.

server-name hostname {port port-no}

Syntax Description

server-name hostname

Specifies the hostname of the accelerated server. 255 alphanumeric characters max, 63 characters per label/segment.

port port-no

Specifies the port number of the accelerated server. Range is 1 to 65535.


Defaults

No default behavior or values.

Command Modes

SSL accelerated service configuration

Device Modes

application-accelerator

central-manager

Examples

The following example shows how to enter SSL accelerated service configuration mode, and then set the accelerated server name and port:

WAE(config)# crypto ssl services accelerated-service myservice
WAE(config-ssl-accelerated)# server-name acc_server port 1
 
   

Related Commands

(config) crypto ssl

(config-ssl-accelerated) version

To specify the type of SSL protocol to use for accelerated services, use the version command.

version {all | ssl3 | tls1}

Syntax Description

version {all | ssl3 | tls1}

Specifies SSL3 for the SSL version 3 protocol, TLS1 for the Transport Layer Security version 1 protocol, or All to use both SSL3 and TLS1 SSL protocols.


Defaults

No default behavior or values.

Command Modes

SSL accelerated service configuration

Device Modes

application-accelerator

central-manager

Examples

The following example shows how to enter SSL accelerated service configuration mode, and then set the protocol to SSL version 3:

WAE(config)# crypto ssl services accelerated-service myservice
WAE(config-ssl-accelerated)# version SSL3
 
   

Related Commands

(config) crypto ssl