C Show Commands

show callhome

show callhome [ __readonly__ <output_state> <info> <per_name> [ <name> ] <email_info> [ <email_conf> ] <ph_info> [ <ph_conf> ] <str_addr> [ <str_conf> ] <site_id> [ <site_id_conf> ] <cust_id> [ <cus_id_conf> ] <contr_id> [ <contr_id_conf> ] <swi_pri> [ <swi_pri_value> ] <dup_mess> <per_inv> <per_time> <per_timeofday> <dist> ]

Syntax Description

show

Show running system information

callhome

Show callhome information

__readonly__

(Optional)

output_state

(Optional)

info

(Optional)

per_name

(Optional)

name

(Optional)

email_info

(Optional)

email_conf

(Optional)

ph_info

(Optional)

ph_conf

(Optional)

str_addr

(Optional)

str_conf

(Optional)

site_id

(Optional)

site_id_conf

(Optional)

cust_id

(Optional)

cus_id_conf

(Optional)

contr_id

(Optional)

contr_id_conf

(Optional)

swi_pri

(Optional)

swi_pri_value

(Optional)

dup_mess

(Optional)

per_inv

(Optional)

per_time

(Optional)

per_timeofday

(Optional)

dist

(Optional)

Command Mode

  • /exec

show callhome destination-profile

show callhome destination-profile [ __readonly__ { TABLE_call_info [ <dest_full_info> ] [ <dest_short_info> ] [ <dest_xml_info> ] [ <dest_def_info> ] <max_mess_size> <mess_format> <mess_level> <trans_method> <email_info> [ <index> <email_conf> ] <url_info> [ <index> <url_conf> ] <alert_groups> [ <alert_conf> ] } ]

Syntax Description

show

Show running system information

callhome

Show callhome information

destination-profile

Show callhome destination profile information

__readonly__

(Optional)

TABLE_call_info

(Optional)

dest_full_info

(Optional)

dest_short_info

(Optional)

dest_xml_info

(Optional)

dest_def_info

(Optional)

max_mess_size

(Optional)

mess_format

(Optional)

mess_level

(Optional)

trans_method

(Optional)

index

(Optional)

email_info

(Optional)

email_conf

(Optional)

url_info

(Optional)

url_conf

(Optional)

alert_groups

(Optional)

alert_conf

(Optional)

Command Mode

  • /exec

show callhome destination-profile profile

show callhome destination-profile profile <s0> [ __readonly__ <user_txt_info> <max_mess_size> <mess_format> <mess_level> <trans_method> <email_info> [ TABLE_email [ <index> <email_conf> ] ] <url_info> [ TABLE_url [ <index> <url_conf> ] ] <alert_groups> [ TABLE_alert [ <alert_conf> ] ] ]

Syntax Description

show

Show running system information

callhome

Show callhome information

destination-profile

Show callhome destination profile information

profile

Specify the destination profile

s0

Show information for user defined destination profile

__readonly__

(Optional)

user_txt_info

(Optional)

max_mess_size

(Optional)

mess_format

(Optional)

mess_level

(Optional)

trans_method

(Optional)

email_info

(Optional)

index

(Optional)

TABLE_email

(Optional)

email_conf

(Optional)

url_info

(Optional)

TABLE_url

(Optional)

url_conf

(Optional)

alert_groups

(Optional)

TABLE_alert

(Optional)

alert_conf

(Optional)

Command Mode

  • /exec

show callhome destination-profile profile CiscoTAC-1

show callhome destination-profile profile CiscoTAC-1 [ __readonly__ <tac_xml_info> <max_mess_size> <mess_level> <trans_method> <email_info> [ <index> <email_conf> ] <url_info> [ <index> <url_conf> ] <alert_groups> [ <alert_conf> ] ]

Syntax Description

show

Show running system information

callhome

Show callhome information

destination-profile

Show callhome destination profile information

profile

Specify the destination profile

CiscoTAC-1

Show information for CiscoTAC-1 destination profile

__readonly__

(Optional)

tac_xml_info

(Optional)

max_mess_size

(Optional)

mess_level

(Optional)

trans_method

(Optional)

email_info

(Optional)

index

(Optional)

email_conf

(Optional)

url_info

(Optional)

url_conf

(Optional)

alert_groups

(Optional)

alert_conf

(Optional)

Command Mode

  • /exec

show callhome destination-profile profile full-txt-destination

show callhome destination-profile profile full-txt-destination [ __readonly__ <full_txt_info> <max_mess_size> <mess_level> <trans_method> <email_info> [ <index> <email_conf> ] <url_info> [ <index> <url_conf> ] <alert_groups> [ <alert_conf> ] ]

Syntax Description

show

Show running system information

callhome

Show callhome information

destination-profile

Show callhome destination profile information

profile

Specify the destination profile

full-txt-destination

Show information for full-txt-destination destination profile

__readonly__

(Optional)

full_txt_info

(Optional)

max_mess_size

(Optional)

mess_level

(Optional)

trans_method

(Optional)

email_info

(Optional)

index

(Optional)

email_conf

(Optional)

url_info

(Optional)

url_conf

(Optional)

alert_groups

(Optional)

alert_conf

(Optional)

Command Mode

  • /exec

show callhome destination-profile profile short-txt-destination

show callhome destination-profile profile short-txt-destination [ __readonly__ <shrt_txt_info> <max_mess_size> <mess_level> <trans_method> <email_info> [ <index> <email_conf> ] <url_info> [ <index> <url_conf> ] <alert_groups> [ <alert_conf> ] ]

Syntax Description

show

Show running system information

callhome

Show callhome information

destination-profile

Show callhome destination profile information

profile

Specify the destination profile

short-txt-destination

Show information for short-txt-destination destination profile

__readonly__

(Optional)

shrt_txt_info

(Optional)

max_mess_size

(Optional)

mess_level

(Optional)

trans_method

(Optional)

email_info

(Optional)

index

(Optional)

email_conf

(Optional)

url_info

(Optional)

url_conf

(Optional)

alert_groups

(Optional)

alert_conf

(Optional)

Command Mode

  • /exec

show callhome transport-email

show callhome transport-email [ __readonly__ { <from_email> } [ <reply_to_email> ] [ <return_receipt_addr> ] { <smtp_server> } [ <smtp_server_port> ] ]

Syntax Description

__readonly__

(Optional)

show

Show running system information

callhome

Show callhome information

transport-email

Show callhome email transport configuration

from_email

(Optional)

reply_to_email

(Optional)

return_receipt_addr

(Optional)

smtp_server

(Optional)

smtp_server_port

(Optional)

Command Mode

  • /exec

show callhome transport

show callhome transport [ __readonly__ <vrf> <from_email> [ <rep_email> ] [ <ret_email> ] [ <smtp_ser> ] [ <smtp_ser_port> ] [ <smtp_ser_vrf> ] [ <smtp_ser_prior> ] [ <smtp_ser_do> ] [ <smtp_ser_port_do> ] [ <smtp_ser_vrf_do> ] [ <smtp_ser_prior_do> ] [ <smtp_ser_got> ] [ <smtp_ser_port_got> ] [ <smtp_ser_vrf_got> ] [ <smtp_ser_prior_got> ] <http_prox> <http_port> <http_state> ]

Syntax Description

show

Show running system information

callhome

Show callhome information

transport

Show callhome transport configuration (email and http)

__readonly__

(Optional)

vrf

(Optional)

from_email

(Optional)

rep_email

(Optional)

ret_email

(Optional)

smtp_ser

(Optional)

smtp_ser_port

(Optional)

smtp_ser_vrf

(Optional)

smtp_ser_prior

(Optional)

smtp_ser_do

(Optional)

smtp_ser_port_do

(Optional)

smtp_ser_vrf_do

(Optional)

smtp_ser_prior_do

(Optional)

smtp_ser_got

(Optional)

smtp_ser_port_got

(Optional)

smtp_ser_vrf_got

(Optional)

smtp_ser_prior_got

(Optional)

http_prox

(Optional)

http_port

(Optional)

http_state

(Optional)

Command Mode

  • /exec

show callhome user-def-cmds

show callhome user-def-cmds [ __readonly__ { <user_configured_cmds> } [ { TABLE_user_def_cmds <alert_group> <index> <user_defined_cmds> } ] ]

Syntax Description

show

Show running system information

callhome

Show callhome information

user-def-cmds

Show the cli commands configured for each alert group

__readonly__

(Optional)

user_configured_cmds

(Optional) List of user configured commands

TABLE_user_def_cmds

(Optional)

index

(Optional)

alert_group

(Optional)

user_defined_cmds

(Optional)

Command Mode

  • /exec

show cdp

show cdp { entry { all1 | name <s0> } } [ __readonly__ TABLE_cdp_entry_all <device_id> [ <sysname> ] <numaddr> [ { <v4addr> | <v6addr> } + ] <platform_id> <capability> + <intf_id> <port_id> <ttl> <version> <version_no> [ <nativevlan> ] [ <vtpname> ] [ <duplexmode> ] [ <syslocation> ] [ <num_mgmtaddr> [ { <v4mgmtaddr> | <v6mgmtaddr> } + ] ] ]

Syntax Description

show

Show running system information

cdp

Show Cisco Discovery Protocol information

entry

Show CDP entries in database

all1

Show all CDP entries in database

name

Show a specific CDP entry matching a name

s0

__readonly__

(Optional) Read only

TABLE_cdp_entry_all

(Optional) output of show cdp entry all

device_id

(Optional) Device Identifier

sysname

(Optional) System Name

numaddr

(Optional) No of IP Address configured

v4addr

(Optional) Interface IP V4 Address

v6addr

(Optional) Interface IP V6 Address

platform_id

(Optional) Platform Id

capability

(Optional) Capability

intf_id

(Optional) Interface Id

port_id

(Optional) Port Identifier

ttl

(Optional) Hold Time

version

(Optional) Software Version

version_no

(Optional) CDP version number

nativevlan

(Optional) NativeVLAN

vtpname

(Optional) Vtp Management Domain Name

duplexmode

(Optional) Duplex Mode

syslocation

(Optional) System Location

num_mgmtaddr

(Optional) No of Mgmt Address configured

v4mgmtaddr

(Optional) IP V4 Mgmt Address

v6mgmtaddr

(Optional) IP V6 Mgmt Address

Command Mode

  • /exec

show cdp all

show cdp { all | interface <if0> } [ __readonly__ TABLE_cdp_all <intf_id> <port_up> [ <cdp_global_enabled> ] <cdp_intf_enabled> [ <oper_mode> ] <refresh_time> <ttl> ]

Syntax Description

show

Show running system information

cdp

Show Cisco Discovery Protocol information

all

Show all interfaces in CDP database

interface

Show CDP parameters for an interface

if0

__readonly__

(Optional) Read only

TABLE_cdp_all

(Optional) output of show cdp all

intf_id

(Optional) Interface Id

port_up

(Optional) Port status

cdp_global_enabled

(Optional) CDP global status

cdp_intf_enabled

(Optional) CDP interface status

oper_mode

(Optional) CDP operation mode

refresh_time

(Optional) Refresh Time

ttl

(Optional) Hold Time

Command Mode

  • /exec

show cdp global

show cdp global [ __readonly__ <cdp_global_enabled> <refresh_time> <ttl> <v2_advertisement> <deviceid_format> ]

Syntax Description

show

Show running system information

cdp

Show Cisco Discovery Protocol information

global

Show CDP global parameters

__readonly__

(Optional) Read only

cdp_global_enabled

(Optional) CDP global status

refresh_time

(Optional) Refresh Time

ttl

(Optional) Hold Time

v2_advertisement

(Optional) Show v2 advertisement

deviceid_format

(Optional) Show deviceId Format

Command Mode

  • /exec

show cdp neighbors

show cdp neighbors [ interface <if> ] [ __readonly__ { TABLE_cdp_neighbor_brief_info <ifindex> <device_id> <intf_id> <ttl> <capability> + <platform_id> <port_id> } { <neigh_count> } ]

Syntax Description

show

Show running system information

cdp

Show Cisco Discovery Protocol information

neighbors

Show CDP neighbors

interface

(Optional) Show CDP neighbors on an interface

if

(Optional) Specify Interface

__readonly__

(Optional) Read only

TABLE_cdp_neighbor_brief_info

(Optional) output of show cdp neighbor - in brief

ifindex

(Optional) Interface index

device_id

(Optional) System Name (or) Device Identifier

intf_id

(Optional) Interface Id

port_id

(Optional) Port Identifier

platform_id

(Optional) Platform Id

ttl

(Optional) Hold Time

capability

(Optional) Capability

neigh_count

(Optional) Neighbor Count

Command Mode

  • /exec

show cdp neighbors detail

show cdp neighbors [ interface <if> ] detail [ __readonly__ TABLE_cdp_neighbor_detail_info <ifindex> <device_id> [ <sysname> ] [ <vtpname> ] <numaddr> [ { <v4addr> | <v6addr> } + ] <platform_id> <capability> + <intf_id> <port_id> <ttl> <version> <version_no> [ <nativevlan> ] [ <duplexmode> ] [ <mtu> ] [ <syslocation> ] [ <num_mgmtaddr> [ { <v4mgmtaddr> | <v6mgmtaddr> } + ] ] <local_intf_mac> <remote_intf_mac> ]

Syntax Description

show

Show running system information

cdp

Show Cisco Discovery Protocol information

neighbors

Show CDP neighbors

detail

Show CDP neighbors detailed

interface

(Optional) Show CDP neighbors on an interface

if

(Optional) Specify Interface

__readonly__

(Optional) Read only

TABLE_cdp_neighbor_detail_info

(Optional) output of show cdp neighbor detail

ifindex

(Optional) Interface index

device_id

(Optional) Device Identifier

sysname

(Optional) System Name

vtpname

(Optional) Vtp Management Domain Name

numaddr

(Optional) No of IP Address configured

v4addr

(Optional) Interface IP V4 Address

v6addr

(Optional) Interface IP V6 Address

platform_id

(Optional) Platform Id

capability

(Optional) Capability

intf_id

(Optional) Interface Id

port_id

(Optional) Port Identifier

ttl

(Optional) Hold Time

version

(Optional) Software Version

version_no

(Optional) CDP version number

nativevlan

(Optional) NativeVLAN

duplexmode

(Optional) Duplex Mode

mtu

(Optional) MTU

syslocation

(Optional) System Location

num_mgmtaddr

(Optional) No of Mgmt Address configured

v4mgmtaddr

(Optional) IP V4 Mgmt Address

v6mgmtaddr

(Optional) IP V6 Mgmt Address

local_intf_mac

(Optional) Local interface MAC

remote_intf_mac

(Optional) Remote interface MAC

Command Mode

  • /exec

show cdp traffic interface2

show cdp traffic interface2 <if2> [ __readonly__ <intf_id> <total_input_packets> <valid_cdp_packets> <input_v1_packets> <input_v2_packets> <invalid_cdp_packets> <unsupported_version> <checksum_errors> <malformed_packets> <total_output_packets> <output_v1_packets> <output_v2_packets> <send_errors> <flap_cnt> ]

Syntax Description

show

Show running system information

cdp

Show Cisco Discovery Protocol information

traffic

Show CDP traffic statistics

interface2

Show CDP traffic statistics on an interface

if2

__readonly__

(Optional) Read only

intf_id

(Optional) Interface Id

total_input_packets

(Optional) Total input cdp packets

valid_cdp_packets

(Optional) Total valid cdp packets

input_v1_packets

(Optional) Input vesrion1 packets

input_v2_packets

(Optional) Input vesrion2 packets

invalid_cdp_packets

(Optional) Invalid cdp packets

unsupported_version

(Optional) Packets having unsupported version

checksum_errors

(Optional) Packets having checksum errors

malformed_packets

(Optional) Total malformed packets

total_output_packets

(Optional) Total output packets

output_v1_packets

(Optional) Output vesrion1 packets

output_v2_packets

(Optional) Output vesrion2 packets

send_errors

(Optional) Number of send errors

flap_cnt

(Optional) Number of PDU timeout

Command Mode

  • /exec

show cdp traffic interface2 all

show cdp traffic interface2 all [ __readonly__ TABLE_cdp_traffic <intf_id> <total_input_packets> <valid_cdp_packets> <input_v1_packets> <input_v2_packets> <invalid_cdp_packets> <unsupported_version> <checksum_errors> <malformed_packets> <total_output_packets> <output_v1_packets> <output_v2_packets> <send_errors> <flap_cnt> ]

Syntax Description

show

Show running system information

cdp

Show Cisco Discovery Protocol information

traffic

Show CDP traffic statistics

interface2

Show CDP traffic statistics on an interface

all

Display all interface traffic

__readonly__

(Optional) Read only

TABLE_cdp_traffic

(Optional) output of show cdp traffic

intf_id

(Optional) Interface Id

total_input_packets

(Optional) Total input cdp packets

valid_cdp_packets

(Optional) Total valid cdp packets

input_v1_packets

(Optional) Input vesrion1 packets

input_v2_packets

(Optional) Input vesrion2 packets

invalid_cdp_packets

(Optional) Invalid cdp packets

unsupported_version

(Optional) Packets having unsupported version

checksum_errors

(Optional) Packets having checksum errors

malformed_packets

(Optional) Total malformed packets

total_output_packets

(Optional) Total output packets

output_v1_packets

(Optional) Output vesrion1 packets

output_v2_packets

(Optional) Output vesrion2 packets

send_errors

(Optional) Number of send errors

flap_cnt

(Optional) Number of PDU timeout

Command Mode

  • /exec

show cfs application

show cfs application [ { name <cfs-dyn-app-name> | sap <i0> } ] [ __readonly__ [ <enabled> <timeout> <merge_capable> <scope> <region> ] [ { TABLE_apps <app_name> <app_enabled> <app_scope> } ] ]

Syntax Description

show

Show running system information

cfs

CFS Show Command handler

application

Show locally registered applications

name

(Optional) Show local application information by name

cfs-dyn-app-name

(Optional) Registered name of the local application

sap

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

i0

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

__readonly__

(Optional)

enabled

(Optional) whether application is CFS enabled

timeout

(Optional) timeout

merge_capable

(Optional) merge_capable

scope

(Optional) scope

region

(Optional) region

TABLE_apps

(Optional) all cfs applications

app_name

(Optional) name of cfs application

app_enabled

(Optional) whether application is cfs enabled

app_scope

(Optional) distribution scope of cfs application

Command Mode

  • /exec

show cfs lock

show cfs lock [ { name <cfs-dyn-app-name> | sap <i1> } ] [ __readonly__ [ { TABLE_locks [ <app_name> ] <app_scope> [ <vsan> ] [ <domain> ] [ <wwn> ] <ip_addr> <u_name> <u_type> [ <hostname> ] } ] ]

Syntax Description

show

Show running system information

cfs

CFS Show Command handler

lock

Show state of application's logical/physical locks

name

(Optional) Application name for which the lock status is required

cfs-dyn-app-name

(Optional) Registered name of the local application

sap

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

i1

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

__readonly__

(Optional)

TABLE_locks

(Optional) table of all CFS locks

app_name

(Optional) name of CFS application

app_scope

(Optional) scope of CFS application

vsan

(Optional) vsan

domain

(Optional) domain

wwn

(Optional) wwn of switch holding CFS lock

ip_addr

(Optional) ip address of switch holding CFS lock

u_name

(Optional) user name

u_type

(Optional) user type

hostname

(Optional) hostname

Command Mode

  • /exec

show cfs lock

show cfs lock [ { name <cfs-dyn-app-name> [ vsan <i0> ] | sap <i1> [ vsan1 <i2> ] } ]

Syntax Description

show

Show running system information

cfs

CFS Show Command handler

lock

Show state of application's logical/physical locks

name

(Optional) Application name for which the lock status is required

cfs-dyn-app-name

(Optional) Registered name of the local application

vsan

(Optional) Show application's locks per vsan

i0

(Optional) Vsan Range

sap

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

i1

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

vsan1

(Optional) Show application's locks per vsan

i2

(Optional) Vsan Range

Command Mode

  • /exec

show cfs merge status

show cfs merge status [ { name <cfs-dyn-app-name> [ detail ] | sap <i1> [ detail2 ] } ] [ __readonly__ [ { scope <scope> } ] [ { merge_status <status> } ] [ { failure_reason <reason> } ] [ { TABLE_all_merge <app_name> <scope> <vsan> <status> } ] [ { TABLE_local_fabric [ <domain> ] <wwn> <ip_addr> <app_scope> [ <master> ] [ <hostname> ] } ] [ { TABLE_remote_fabric [ <domain> ] <wwn> <ip_addr> <app_scope> [ <master> ] [ <hostname> ] } ] [ { TABLE_remaining_fabric [ <domain> ] <wwn> <ip_addr> [ <hostname> ] } ] ]

Syntax Description

show

Show running system information

cfs

CFS Show Command handler

merge

Show cfs merge information

status

Show status of merge

name

(Optional) Show merge status by name

cfs-dyn-app-name

(Optional) Registered name of the local application

detail

(Optional) Show merge status by name in detail

sap

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

i1

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

detail2

(Optional) Show merge status by sap in detail

__readonly__

(Optional)

scope

(Optional) distribution scope of application

scope

(Optional) scope

merge_status

(Optional) status

status

(Optional) status

failure_reason

(Optional) reason

reason

(Optional) reason

TABLE_all_merge

(Optional) all

app_name

(Optional) name

scope

(Optional) scope

vsan

(Optional) vsan

status

(Optional) status

TABLE_local_fabric

(Optional) local fabric

domain

(Optional) domain

wwn

(Optional) wwn

ip_addr

(Optional) ip_addr

app_scope

(Optional) scope

master

(Optional) master

hostname

(Optional) hname

TABLE_remote_fabric

(Optional) remote fabric

domain

(Optional) domain

wwn

(Optional) wwn

ip_addr

(Optional) ip_addr

app_scope

(Optional) scope

master

(Optional) master

hostname

(Optional) hname

TABLE_remaining_fabric

(Optional) remote fabric

domain

(Optional) domain

wwn

(Optional) wwn

ip_addr

(Optional) ip_addr

hostname

(Optional) hname

Command Mode

  • /exec

show cfs merge status

show cfs merge status [ { name <cfs-dyn-app-name> [ vsan <i0> ] | sap <i1> [ vsan1 <i2> ] } ]

Syntax Description

show

Show running system information

cfs

CFS Show Command handler

merge

Show cfs merge information

status

Show status of merge

name

(Optional) Show merge status by name

cfs-dyn-app-name

(Optional) Registered name of the local application

vsan

(Optional) Show merge information based on vsan

i0

(Optional) Vsan Range

sap

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

i1

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

vsan1

(Optional) Show merge information based on vsan

i2

(Optional) Vsan Range

Command Mode

  • /exec

show cfs peers

show cfs peers [ { name <cfs-dyn-app-name> | sap <i1> } ] [ __readonly__ [ { scope <scope> } ] [ { TABLE_peers <wwn> <ip_addr> [ <local> ] [ <hostname> ] [ <domain> ] } ] ]

Syntax Description

show

Show running system information

cfs

CFS Show Command handler

peers

Show all the peers in the physical fabric

name

(Optional) Show peers for given application name

cfs-dyn-app-name

(Optional) Registered name of the local application

sap

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

i1

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

__readonly__

(Optional)

scope

(Optional) scope

scope

(Optional) scope

TABLE_peers

(Optional) all peers

wwn

(Optional) wwn

ip_addr

(Optional) ip_addr

local

(Optional) local

hostname

(Optional) hname

domain

(Optional) domain

Command Mode

  • /exec

show cfs peers

show cfs peers [ { name <cfs-dyn-app-name> [ vsan <i0> ] | sap <i1> [ vsan1 <i2> ] } ]

Syntax Description

show

Show running system information

cfs

CFS Show Command handler

peers

Show all the peers in the physical fabric

name

(Optional) Show peers for given application name

cfs-dyn-app-name

(Optional) Registered name of the local application

vsan

(Optional) Show peers for a specified vsan(s)

i0

(Optional) Vsan Range

sap

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

i1

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

vsan1

(Optional) Show peers for a specified vsan(s)

i2

(Optional) Vsan Range

Command Mode

  • /exec

show cfs regions

show cfs regions [ { brief [ region <i0> ] | name <cfs-dyn-app-name> | region1 <i1> } ] [ __readonly__ [ { region <id> } ] [ { application <name> } ] [ { scope <scope> } ] [ { TABLE_PEERS <wwn> <ip_addr> <local> [ <hostname> ] [ <domain> ] } ] [ { TABLE_switches [ <wwn> ] [ <ip_addr> ] <region> <app_name> <enabled> [ <scope> ] } ] ]

Syntax Description

show

Show running system information

cfs

CFS Show Command handler

regions

Show all the applications with peers and region information

brief

(Optional) Show all configured regions and applications(no peers)

region

(Optional) Show all configured applications(no peers)

i0

(Optional) Region Id

name

(Optional) Show peers and region information for a given application

cfs-dyn-app-name

(Optional) Registered name of the local application

region1

(Optional) Show all configured applications with peers

i1

(Optional) Region Id

__readonly__

(Optional)

region

(Optional) region

id

(Optional) id

application

(Optional) app

name

(Optional) name

scope

(Optional) scope

scope

(Optional) scope

TABLE_PEERS

(Optional) all region peers

wwn

(Optional) wwn

ip_addr

(Optional) ip_address

local

(Optional) local

hostname

(Optional) hname

domain

(Optional) domain

TABLE_switches

(Optional) all switches in region

wwn

(Optional) wwn

ip_addr

(Optional) ip_addr

region

(Optional) region

app_name

(Optional) name

enabled

(Optional) enabled

scope

(Optional) scope

Command Mode

  • /exec

show cfs static peers

show cfs static peers

Syntax Description

show

Show running system information

cfs

CFS Show Command handler

static

Show all static peers with status

peers

Show all configured static peers with status

Command Mode

  • /exec

show cfs status

show cfs status [ __readonly__ <distribution> <dist_over_ip> <ipv4_mcast_addr> <ipv6_mcast_addr> <dist_over_eth> ]

Syntax Description

show

Show running system information

cfs

CFS Show Command handler

status

Show current status of CFS

__readonly__

(Optional)

distribution

(Optional) operational status of CFS distribution

dist_over_ip

(Optional) operational status of CFS overIP

ipv4_mcast_addr

(Optional) ipv4 multicast address

ipv6_mcast_addr

(Optional) ipv6 multicast address

dist_over_eth

(Optional) operations status of CFSoE

Command Mode

  • /exec

show checkpoint

show checkpoint [ all ] [ user | system ] [ __readonly__ TABLE_checkpoint_details <name> <checkpoint_config> + ]

Syntax Description

show

Show running system information

checkpoint

Show configuration rollback checkpoints

all

(Optional) Show default config

user

(Optional) Show only user configuration rollback checkpoints

system

(Optional) Show only system configuration rollback checkpoints

__readonly__

(Optional) Read only

TABLE_checkpoint_details

(Optional) checkpoint details

name

(Optional) Checkpoint name

checkpoint_config

(Optional) Configuration entry from checkpoint

Command Mode

  • /exec

show checkpoint

show checkpoint <chkpoint_name> [ all ] [ __readonly__ TABLE_checkpoint_details <name1> <checkpoint_config> + ]

Syntax Description

show

Show running system information

checkpoint

Show configuration rollback checkpoint contents

chkpoint_name

Checkpoint name

all

(Optional) Show default config

__readonly__

(Optional) Read only

TABLE_checkpoint_details

(Optional) Checkpoint details

name1

(Optional) Checkpoint name

checkpoint_config

(Optional) Configuration entry from checkpoint

Command Mode

  • /exec

show checkpoint summary

show checkpoint summary [ user | system ] [ __readonly__ TABLE_checkpoint_header_info <name> <user_name> <timestamp> <file_path> <chkpt_type> <description> ]

Syntax Description

show

Show running system information

checkpoint

Show configuration rollback checkpoints

summary

Show configuration rollback checkpoints summary

user

(Optional) Show only user configuration rollback checkpoints summary

system

(Optional) Show only system configuration rollback checkpoints summary

__readonly__

(Optional) Read only

TABLE_checkpoint_header_info

(Optional) Checkpoint header info

user_name

(Optional) Username

name

(Optional) Checkpoint name

file_path

(Optional) Checkpoint name

timestamp

(Optional) Timestamp of checkpoint creation

chkpt_type

(Optional) Type of checkpoint either user or system

description

(Optional) Checkpoint description

Command Mode

  • /exec

show class-map

show class-map [ { [ type qos ] [ <cmap-name> | xxx <color-map-enum-name> ] } | { type queuing [ yyy <cmap-enum-name> | zzz <default-cmap-enum-name> | <cmap-dce-name> | <cmap-name-hque> ] } ] [ __readonly__ { [ <display-all> ] [ TABLE_cmap [ <cmap-key> ] [ <nq-cmap-key> ] [ <nq-cmap-name> ] [ <nq-cos-list> ] [ <nq-qos-group-list> ] [ <protocol> ] [ <id> ] <xqos-or-q> [ <any_or_all> ] <cmap-name-out> [ <desc> ] [ <nq-desc> ] [ TABLE_match <match-key> [ <not> ] [ <dscp-list> ] [ <precedence-list> ] [ <cos-list> ] [ <qos-group-list> ] [ <discard-class-list> ] [ <vlan-list> ] [ <match-cmap-name> ] [ <match-acl-name> ] [ <note-string> ] [ <pkt-len-list> ] [ <rtp-port-list> ] [ <roce-port-list> ] [ <prot> ] [ <input-iface-list> ] [ <exp-list> ] [ <cl-def> ] ] ] } ]

Syntax Description

xxx

(Optional) xxx

yyy

(Optional) yyy

zzz

(Optional) zzz

show

Show running system information

class-map

Show class maps

type

(Optional) Type of the class-map

qos

(Optional) type qos

queuing

(Optional) type queuing

cmap-name

(Optional) class map name

cmap-enum-name

(Optional)

default-cmap-enum-name

(Optional)

cmap-dce-name

(Optional) Queuing class-map name

cmap-name-hque

(Optional) Hierarchical class-map name

color-map-enum-name

(Optional)

__readonly__

(Optional)

display-all

(Optional) Display all kinds of class-maps

TABLE_cmap

(Optional) all cmap xml sessions

cmap-key

(Optional) Class-map name: xml key

nq-cmap-key

(Optional) Class-map name nq: xml key

nq-cmap-name

(Optional) Class-map xname

protocol

(Optional) protocol

TABLE_match

(Optional) all match xml sessions

match-key

(Optional) match count: xml key

cmap-name-out

(Optional) Class-map name

xqos-or-q

(Optional)

any_or_all

(Optional) Enter match-any or match-all

id

(Optional) Class-map ID

desc

(Optional) Description string

nq-desc

(Optional) Description xstring

not

(Optional) Negate this match result

dscp-list

(Optional) List of DSCP values

precedence-list

(Optional) List of precedence values

cos-list

(Optional) List of class-of-service values

nq-cos-list

(Optional) List of class-of-service values

qos-group-list

(Optional) List of qos-group values

nq-qos-group-list

(Optional) List of qos-group values

discard-class-list

(Optional) List of discard-class values

vlan-list

(Optional) List of vlan-ids

match-cmap-name

(Optional) class-map name

match-acl-name

(Optional) Match class-map name

note-string

(Optional) Placeholder string param to display any info in string format

pkt-len-list

(Optional) Packet length multi-range

rtp-port-list

(Optional) IP RTP UDP port multi-range

roce-port-list

(Optional) IP ROCE UDP port multi-range

prot

(Optional) Protocol

input-iface-list

(Optional) Input Interface multi-range

exp-list

(Optional) List of MPLS exp values

cl-def

(Optional) Match any criteria for class-default only

Command Mode

  • /exec

show class-map type control-plane

show class-map type control-plane [ <cmap-name> ] [ __readonly__ [ { TABLE_cmap <cmap-key> <cmap-name-out> <opt_any_or_all> [ TABLE_match <match-key> [ access_grp <acc_grp_name> ] [ redirect <opt_match_redirect> ] [ exception <opt_match_excpt> ] [ protocol <opt_match_protocol> ] ] } ] ]

Syntax Description

show

Show running system information

class-map

Show class maps

type

Type of the class-map

control-plane

This is for copp policy

cmap-name

(Optional) Name of the class-map

__readonly__

(Optional)

TABLE_cmap

(Optional) all cmap xml sessions

cmap-name-out

(Optional) Name of the class-map

cmap-key

(Optional) Class-map name: xml key

opt_any_or_all

(Optional) Enter match-any or match-all

TABLE_match

(Optional) all match xml sessions

match-key

(Optional) match count: xml key

access_grp

(Optional)

acc_grp_name

(Optional)

redirect

(Optional)

opt_match_redirect

(Optional) Match criteria for redirected packets

exception

(Optional)

opt_match_excpt

(Optional) Match criteria for exception packets

protocol

(Optional)

opt_match_protocol

(Optional) Match criteria for protocol packets

Command Mode

  • /exec

show class-map type network-qos

show class-map type network-qos [ <cmap-name-nq> ] [ __readonly__ { [ <display-all> ] [ TABLE_cmap <cmap-key> <xcmap-name> [ <desc> ] [ <cos-list> ] [ <qos-group-list> ] [ <protocol> ] [ TABLE_xmatch <xmatch-key> [ <xcos-list> ] [ <xqos-group-list> ] [ <xprotocol> ] ] ] } ]

Syntax Description

show

Show running system information

class-map

Show class maps

type

Type of the class-map

cmap-name-nq

(Optional) Class-map name

network-qos

type network-qos

__readonly__

(Optional)

display-all

(Optional) Display all network-qos class-maps

TABLE_cmap

(Optional) all network-qos cmap xml sessions

cmap-key

(Optional) Class-map name: xml key

xcmap-name

(Optional) Class-map name

desc

(Optional) Description string

TABLE_xmatch

(Optional) all match xml sessions

xmatch-key

(Optional) match count: xml key

cos-list

(Optional) List of class-of-service values

qos-group-list

(Optional) List of qos-group values

protocol

(Optional) protocol

xcos-list

(Optional) List of class-of-service values

xqos-group-list

(Optional) List of qos-group values

xprotocol

(Optional) xprotocol

Command Mode

  • /exec

show cli alias

show cli alias [ name <s0> ] [ __readonly__ { TABLE_cli_alias <alias> <name> } ]

Syntax Description

show

Show running system information

cli

Show CLI information

alias

Display the alias configuration

name

(Optional) Display a specific alias

s0

(Optional) Specify the alias

__readonly__

(Optional)

TABLE_cli_alias

(Optional) cli alias table

alias

(Optional) alias

name

(Optional) name

Command Mode

  • /exec

show cli dynamic integers

show cli dynamic integers [ <name> ] [ __readonly__ TABLE_dynamic_integers <name-o> <min> <max> ]

Syntax Description

show

Show running system information

cli

CLI commands

dynamic

Display current range of dynamic parameters

integers

Display current range of dynamic integer parameters

name

(Optional) name of the dynamic parameter

__readonly__

(Optional)

TABLE_dynamic_integers

(Optional)

name-o

(Optional)

min

(Optional)

max

(Optional)

Command Mode

  • /exec

show cli dynamic strings

show cli dynamic strings [ <name> ] [ __readonly__ TABLE_dynamic_strings <name-o> <value> + ]

Syntax Description

show

Show running system information

cli

CLI commands

dynamic

Display current range of dynamic parameters

strings

Display current range of dynamic string parameters

name

(Optional) name of the dynamic parameter

__readonly__

(Optional)

TABLE_dynamic_strings

(Optional)

name-o

(Optional)

value

(Optional)

Command Mode

  • /exec

show cli history

show cli history [ this-mode-only | exec-mode | config-mode ] [ <count> | unformatted ] +

Syntax Description

show

Show running system information

cli

debug cli

history

history of cli commands

count

(Optional) number of lines to display (from end)

unformatted

(Optional) display just the commands

this-mode-only

(Optional) display history from current mode only

exec-mode

(Optional) display history of exec commands only

config-mode

(Optional) display history of config commands only

Command Mode

  • /exec

show cli interface table

show cli interface table

Syntax Description

show

show

cli

cli

interface

interface

table

table

Command Mode

  • /exec

show cli list

show cli list [ detail | recurse | <component> | <max-per-cmd> | has-xml-out ] +

Syntax Description

show

Show running system information

cli

Show CLI information

list

show

component

(Optional) component

max-per-cmd

(Optional) max

has-xml-out

(Optional) show

recurse

(Optional) go

detail

(Optional) formats

Command Mode

  • /exec

show cli syntax

show cli syntax [ long | recurse ] + [ has-xml-out | has-no-xml-out | is-data-modeled ] [ roles [ network-admin | network-operator | <roles-mask> ] ]

Syntax Description

show

Show running system information

cli

Show CLI information

syntax

show

long

(Optional) use

recurse

(Optional) also

has-xml-out

(Optional) show

has-no-xml-out

(Optional) show

is-data-modeled

(Optional) show

roles

(Optional) show

network-admin

(Optional) show

network-operator

(Optional) show

roles-mask

(Optional) show

Command Mode

  • /exec

show cli variables

show cli variables [ __readonly__ <switchname> <timestamp> <currentuser> [ { TABLE_variable <key> <value> } ] [ { TABLE_session_variable <key> <value> } ] ]

Syntax Description

show

Show running system information

cli

Show CLI information

variables

Show CLI variables

__readonly__

(Optional)

switchname

(Optional) Switch Name

timestamp

(Optional) Timestamp

currentuser

(Optional) Current User

TABLE_variable

(Optional) Variable table

key

(Optional) key

value

(Optional) value

TABLE_session_variable

(Optional) Session variable table

key

(Optional) key

value

(Optional) value

Command Mode

  • /exec

show clock

show clock [ detail ] [ __readonly__ { <simple_time> <time_source> [ <daylight_zone> <daylight_start_week> <daylight_start_weekday> <daylight_start_month> <daylight_start_time> <daylight_end_week> <daylight_end_weekday> <daylight_end_month> <daylight_end_time> <daylight_utc_min_offset> ] } ]

Syntax Description

show

Show running system information

clock

Display current Date

detail

(Optional) Display current date and summertime configuration

__readonly__

(Optional)

simple_time

(Optional) simple clock format

time_source

(Optional) Time source

daylight_zone

(Optional) summer-time daylight zone

daylight_start_week

(Optional) daylight start week

daylight_start_weekday

(Optional) daylight start weekday

daylight_start_month

(Optional) daylight start month

daylight_start_time

(Optional) daylight start time

daylight_end_week

(Optional) daylight end week

daylight_end_weekday

(Optional) daylight end weekday

daylight_end_month

(Optional) daylight end month

daylight_end_time

(Optional) daylight end time

daylight_utc_min_offset

(Optional) daylight utc offset

Command Mode

  • /exec

show config-profile

show config-profile [ name <all_conf_profile_name> ] [ __readonly__ TABLE_conf_profile_all <conf_profile_name> { [ <conf_profile_desc> ] <conf_profile_cfg> + [ <conf_profile_applied> ] + [ <conf_profile_include> ] + } ]

Syntax Description

show

Show running system information

config-profile

Show config-profiles

name

(Optional) config-profile name

all_conf_profile_name

(Optional) Enter the name of configuration profile

__readonly__

(Optional)

TABLE_conf_profile_all

(Optional)

conf_profile_name

(Optional)

conf_profile_desc

(Optional)

conf_profile_cfg

(Optional)

conf_profile_applied

(Optional)

conf_profile_include

(Optional)

Command Mode

  • /exec

show config-profile applied

show config-profile { applied [ auto | manually ] | non-applied } [ match-name <profile_substring> ] [ __readonly__ [ <profiles> ] + ]

Syntax Description

show

Show running system information

config-profile

Show config-profiles

applied

List of config-profiles that are applied

auto

(Optional) List of config-profiles that are applied via auto-config

manually

(Optional) List of all config-profiles which were applied directly from cli

non-applied

List of config-profiles that are not applied

match-name

(Optional) List of all config-profiles that have matching sub-string

__readonly__

(Optional)

profiles

(Optional)

profile_substring

(Optional) Enter a substring to match with config-profile name

Command Mode

  • /exec

show config-replace log exec

show config-replace log { exec | verify } [ __readonly__ [ <log_entry> + ] ]

Syntax Description

show

Show running system information

config-replace

Show config-replace

log

show config-replace log

exec

show config-replace execution log

verify

show config-replace verify log

__readonly__

(Optional) Read only

log_entry

(Optional) log entry from configure replace log

Command Mode

  • /exec

show config-replace status

show config-replace status [ __readonly__ <last_operation> [ <config_replace_type> ] [ <name> ] [ <start_time> ] [ <end_time> ] [ <operation_status> ] [ <commit_status> ] [ <commit_timeout_remaining> ] ]

Syntax Description

show

Show running system information

config-replace

show config-replace

status

show status of last configure replace operation

__readonly__

(Optional) Read only

last_operation

(Optional) last operation

config_replace_type

(Optional) config-replace type

name

(Optional) name

start_time

(Optional) start time

end_time

(Optional) end time

operation_status

(Optional) operation status

commit_status

(Optional) Commit status

commit_timeout_remaining

(Optional) commit timeout remaining

Command Mode

  • /exec

show configuration

show configuration

Syntax Description

show

Show running system information

configuration

Show information about configuration sessions

Command Mode

  • /exec

show configuration commit

show configuration commit { changes <conf-commit-id> | <conf-commit-id> | log }

Syntax Description

show

Show running system information

configuration

Show information about configuration sessions

commit

commit information

changes

difference in commited configs

conf-commit-id

commit ID

log

Displays execution logs of last commit

Command Mode

  • /exec

show configuration commit list

show configuration commit list

Syntax Description

show

Show running system information

configuration

Show information about configuration sessions

commit

commit information

list

Information about commit-id

Command Mode

  • /exec

show configuration file

show configuration file <uri0> [ clear-text ]

Syntax Description

show

Show running system information

configuration

Show information about configuration sessions

file

Displays content of files

uri0

Filename to be displayed

clear-text

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

Command Mode

  • /exec

show configuration session

show configuration session <s3> [ __readonly__ <ssn-name> [ TABLE_session_details [ <ssn-cmd-num> ] [ <command> ] ] ]

Syntax Description

show

Show running system information

configuration

Show information about configuration sessions

session

Show active configuration sessions

s3

Shows configuration session given a name

__readonly__

(Optional) Read only

ssn-name

(Optional)

TABLE_session_details

(Optional) Show session details for given name

ssn-cmd-num

(Optional)

command

(Optional)

Command Mode

  • /exec

show configuration session

show configuration session [ __readonly__ [ TABLE_session_all <ssn-name> [ TABLE_session_all_cmd [ <ssn-cmd-num> ] [ <command> ] ] ] <activesesscnt> ]

Syntax Description

show

Show running system information

configuration

Show information about configuration sessions

session

Show active configuration sessions

__readonly__

(Optional) Read only

TABLE_session_all

(Optional) Show session table

ssn-name

(Optional)

TABLE_session_all_cmd

(Optional) Show session related commands

ssn-cmd-num

(Optional)

command

(Optional)

activesesscnt

(Optional) Number of active configuration sessions

Command Mode

  • /exec

show configuration session global-info

show configuration session global-info [ __readonly__ <max-ssns> <max-cmds> <curr-num-ssns> <curr-num-cmds> ]

Syntax Description

show

Show running system information

configuration

Show information about configuration sessions

session

Show active configuration sessions

global-info

Show configuration sessions global-info

__readonly__

(Optional) Read only

max-ssns

(Optional)

max-cmds

(Optional)

curr-num-ssns

(Optional)

curr-num-cmds

(Optional)

Command Mode

  • /exec

show configuration session status

show configuration session status [ <s3> ] [ __readonly__ [ TABLE_session_status <ssn-name> <last-action> <ac-status> <ac-reason> <ac-tstamp> [ <failed-cmd-num> ] [ <failed-cmd> ] [ <last-vfy-cmd-num> ] [ <last-vfy-cmd> ] [ <last-vfy-tstamp> ] [ <rollback-status> ] ] ]

Syntax Description

show

Show running system information

configuration

Show information about configuration sessions

session

Show active configuration sessions

status

Show configuration session-mgr status

s3

(Optional) Shows configuration session status given a name

__readonly__

(Optional) Read only

TABLE_session_status

(Optional) Show session status table

ssn-name

(Optional)

last-action

(Optional) Last Action

ac-status

(Optional) Last Action Status

ac-reason

(Optional) Last Action Reason

ac-tstamp

(Optional) Last Action Timestamp

failed-cmd-num

(Optional) Failed Command Number

failed-cmd

(Optional) Failed Command

last-vfy-cmd-num

(Optional) Last Verified Command Number

last-vfy-cmd

(Optional) Last Verified Command

last-vfy-tstamp

(Optional) Last Verified Command Timestamp

rollback-status

(Optional) Rollback Status

Command Mode

  • /exec

show configuration session summary

show configuration session summary [ __readonly__ [ TABLE_session_summary <ssn-name> <username> <tstamp> ] [ <activesesscnt> ] ]

Syntax Description

show

Show running system information

configuration

Show information about configuration sessions

session

Show active configuration sessions

summary

Show summary of the active configuration sessions

__readonly__

(Optional) Read only

TABLE_session_summary

(Optional) Show session summary table

ssn-name

(Optional)

username

(Optional) Session Owner

tstamp

(Optional) Creation Time

activesesscnt

(Optional) Number of active configuration sessions

Command Mode

  • /exec

show configuration session vsh

show configuration session <s3> vsh [ __readonly__ <ssn-name> [ TABLE_session_details_vsh [ <ssn-cmd-num> ] [ <command> ] ] ]

Syntax Description

show

Show running system information

configuration

Show information about configuration sessions

session

Show active configuration sessions

s3

Shows configuration session given a name

vsh

__readonly__

(Optional) Read only

TABLE_session_details_vsh

(Optional) Show session details for given name on vsh

ssn-name

(Optional)

ssn-cmd-num

(Optional)

command

(Optional)

Command Mode

  • /exec

show consistency-checker copp

show consistency-checker copp

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

copp

Verify copp programming from software context

Command Mode

  • /exec

show consistency-checker copp extended module

show consistency-checker copp extended module <module-id> [ brief | detail ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

copp

Verify copp programming from software context

extended

extended

module

Limit display to this module

module-id

Enter module number

brief

(Optional) Show consistency checker structured output in brief

detail

(Optional) Show consistency checker structured output in detail

Command Mode

  • /exec

show consistency-checker dme interfaces

show consistency-checker dme interfaces

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

dme

DME (ObjectStore)

interfaces

interfaces oper data

Command Mode

  • /exec

show consistency-checker egress-xlate private-vlan

show consistency-checker egress-xlate private-vlan <vlan>

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

egress-xlate

Check PVLAN egress-xlate

private-vlan

Verifies private-vlan egress-xlate in the hardware

vlan

Enter private-vlan id

Command Mode

  • /exec

show consistency-checker ehm interface

show consistency-checker ehm interface { <intf> | all }

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

ehm

Show EHM Info

interface

Show interface status and information

intf

Virtual Interface

all

Display All Interfaces

Command Mode

  • /exec

show consistency-checker fcoe

show consistency-checker fcoe [ { interface <if1> } | { npv [ server-interface <svr_if1> external-interface <ext_if1> ] } | { hw-table { pif | vif | ucpccfg | vsan | acl | fib [ flogi | domain [ local | remote ] ] | fcf | zone | mac } } | { [ exclude ] ping } | { drop [ ingress | egress ] } ] [ verbose [ detail ] ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

fcoe

FCoE manager

interface

(Optional) Interface Test

if1

(Optional) Interface name

npv

(Optional) NPV server to external interface pinning test

server-interface

(Optional) Server Interface Name

svr_if1

(Optional) Server Interface name

external-interface

(Optional) External Interface Name

ext_if1

(Optional) External Interface name

hw-table

(Optional) Consistency checker for Hardware Tables

pif

(Optional) PIF Table Test

vif

(Optional) VIF Table Test

ucpccfg

(Optional) Port-channel Program Table Test

vsan

(Optional) VSAN VLAN related tables

acl

(Optional) ACL Test

fib

(Optional) FIB Test

flogi

(Optional) FIB Test for FLOGIs

domain

(Optional) FIB Test for domains

local

(Optional) FIB Test for local domains

remote

(Optional) FIB Test for remote domains

fcf

(Optional) FCF Test

zone

(Optional) ZONE Test

mac

(Optional) MAC Table Test

exclude

(Optional) Exclude given test

ping

(Optional) FCPING Test

drop

(Optional) Hardware drops

ingress

(Optional) Ingress Drop Test

egress

(Optional) Egress Drop Test

verbose

(Optional) To get debugs

detail

(Optional) To get detailed debugs

Command Mode

  • /exec

show consistency-checker fex-interfaces fex

show consistency-checker fex-interfaces { fex <id> | interface <ifid> } [ brief | detail ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

fex-interfaces

Compares software and hardware state of fex interfaces

fex

Limit display to interfaces on this fex

id

Enter module number

interface

Limit display to FEX interface

ifid

FEX interface name

brief

(Optional) Show consistency checker structured output in brief

detail

(Optional) Show consistency checker structured output in detail

Command Mode

  • /exec

show consistency-checker forwarding

show consistency-checker forwarding [ ip | ipv4 ] [ unicast ] [ suppress-transient ] [ vrf { <vrf-name> | all_vrfs } ] [ module { <module> | all_modules } ] [ __readonly__ [ <err_str> ] [ <cc_header> ] [ <table_id> ] [ <slot_id> ] [ <exec_time> ] [ <elapsed_time> ] [ <inconsis_adjs> ] [ TABLE_inconsistency_adjs { <id> <slot> [ <unit> ] <vrf> [ <ipaddr> ] [ <ipprefix> ] [ <interface> ] <reason> } ] [ <inconsis_routes> ] [ TABLE_inconsistency_routes { <id> <slot> [ <unit> ] <vrf> [ <ipaddr> ] [ <ipprefix> ] [ <interface> ] <reason> } ] [ <run_status> ] ]

Syntax Description

show

show

consistency-checker

Consistency Checker

forwarding

Display Forwarding Information

ip

(Optional) ipv4

ipv4

(Optional) ipv4

unicast

(Optional) unicast

suppress-transient

(Optional) Supress Transient state

vrf

(Optional) check routes for a specific VRF

vrf-name

(Optional) VRF name

module

(Optional) check routes for a specific module

module

(Optional) module number

all_modules

(Optional) all module's

all_vrfs

(Optional) all vrf's

__readonly__

(Optional)

err_str

(Optional)

cc_header

(Optional)

table_id

(Optional)

slot_id

(Optional)

exec_time

(Optional)

elapsed_time

(Optional)

inconsis_adjs

(Optional)

TABLE_inconsistency_adjs

(Optional)

id

(Optional)

slot

(Optional)

unit

(Optional)

vrf

(Optional)

ipaddr

(Optional)

ipprefix

(Optional)

interface

(Optional)

reason

(Optional)

inconsis_routes

(Optional)

TABLE_inconsistency_routes

(Optional)

id

(Optional)

slot

(Optional)

unit

(Optional)

vrf

(Optional)

ipaddr

(Optional)

ipprefix

(Optional)

interface

(Optional)

reason

(Optional)

run_status

(Optional)

Command Mode

  • /exec

show consistency-checker forwarding ipv6

show consistency-checker forwarding ipv6 [ unicast ] [ suppress-transient ] [ vrf { <vrf-name> | all_vrfs } ] [ module { <module> | all_modules } ] [ __readonly__ [ <err_str> ] [ <cc_header> ] [ <table_id> ] [ <slot_id> ] [ <exec_time> ] [ <elapsed_time> ] [ <inconsis_adjs> ] [ TABLE_inconsistency_adjs { <idipv6> <slotipv6> [ <unitipv6> ] <vrfipv6> [ <ipv6addr> ] [ <ipv6prefix> ] [ <interfaceipv6> ] <reasonipv6> } ] [ <inconsis_routes> ] [ TABLE_inconsistency_routes { <idipv6> <slotipv6> [ <unitipv6> ] <vrfipv6> [ <ipv6addr> ] [ <ipv6prefix> ] [ <interfaceipv6> ] <reasonipv6> } ] [ <run_status> ] ]

Syntax Description

show

show

consistency-checker

Consistency Checker

forwarding

Display Forwarding Information

ipv6

ipv6

unicast

(Optional) unicast

suppress-transient

(Optional) Supress Transient state

vrf

(Optional) check routes for a specific VRF

vrf-name

(Optional) VRF name

module

(Optional) check routes for a specific module

module

(Optional) module number

all_modules

(Optional) all module's

all_vrfs

(Optional) all vrf's

__readonly__

(Optional)

err_str

(Optional)

cc_header

(Optional)

table_id

(Optional)

slot_id

(Optional)

exec_time

(Optional)

elapsed_time

(Optional)

inconsis_adjs

(Optional)

TABLE_inconsistency_adjs

(Optional)

idipv6

(Optional)

slotipv6

(Optional)

unitipv6

(Optional)

vrfipv6

(Optional)

interfaceipv6

(Optional)

reasonipv6

(Optional)

inconsis_routes

(Optional)

TABLE_inconsistency_routes

(Optional)

idipv6

(Optional)

slotipv6

(Optional)

unitipv6

(Optional)

vrfipv6

(Optional)

interfaceipv6

(Optional)

reasonipv6

(Optional)

run_status

(Optional)

Command Mode

  • /exec

show consistency-checker forwarding single-route ipv4 vrf

show consistency-checker forwarding single-route { ipv4 | ipv6 } <ip-prefix> vrf { <vrf-name> | <vrf-known-name> } [ brief | detail ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

forwarding

Display Forwarding Information

single-route

Run the consistency checker for a single route

ipv4

IPv4 address

ipv6

IPv6 address

ip-prefix

Specify an IP prefix/mask

vrf

check routes for a specific VRF

vrf-name

VRF name

vrf-known-name

Known VRF name

brief

(Optional) Show consistency checker structured output in brief

detail

(Optional) Show consistency checker structured output in detail

Command Mode

  • /exec

show consistency-checker fsync

show consistency-checker fsync [ debug-logs ] [ brief | detail ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

fsync

Do consistency check for frequnecy synchronization

debug-logs

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

brief

(Optional) Show consistency checker structured output in brief

detail

(Optional) Show consistency checker structured output in detail

Command Mode

  • /exec

show consistency-checker gwmacdb

show consistency-checker gwmacdb [ interface { <int-id> | <ch-id> | <vlan-id> } ] [ brief | detail ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

gwmacdb

Check gateway mac table

interface

(Optional) interface

int-id

(Optional) Physical or Logical interface

ch-id

(Optional) Port-Channel name

vlan-id

(Optional) SVI VLAN

brief

(Optional) Show consistency checker structured output in brief

detail

(Optional) Show consistency checker structured output in detail

Command Mode

  • /exec

show consistency-checker hardware-telemetry inband brief

show consistency-checker hardware-telemetry inband { brief | detail }

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

hardware-telemetry

feature hardware-telemetry

inband

inband-telemetry version

brief

Show consistency checker structured output in brief

detail

Show consistency checker structured output in detail

Command Mode

  • /exec

show consistency-checker hardware-telemetry postcard brief

show consistency-checker hardware-telemetry postcard { brief | detail }

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

hardware-telemetry

feature hardware-telemetry

postcard

postcard-telemetry version

brief

Show consistency checker structured output in brief

detail

Show consistency checker structured output in detail

Command Mode

  • /exec

show consistency-checker kim

show consistency-checker kim

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

kim

Kernel Interface

Command Mode

  • /exec

show consistency-checker kim interface

show consistency-checker kim { interface <ifid> } [ brief | detail ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

kim

kernel interface

interface

Limit display to interface

ifid

Interface

brief

(Optional) Show consistency checker structured output in brief

detail

(Optional) Show consistency checker structured output in detail

Command Mode

  • /exec

show consistency-checker l2-tahoe mac-address

show consistency-checker l2-tahoe mac-address <mac-addr> [ module <module> ] [ unit <unit> ] [ brief | detail ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

l2-tahoe

Verify l2 mac programming in the hardware

mac-address

MAC address

mac-addr

address

module

(Optional) Module to run the consistency-checker on

module

(Optional) Module number

unit

(Optional) Unit to run the consistency checker on

unit

(Optional) Enter Unit Number

brief

(Optional) Show consistency checker structured output in brief

detail

(Optional) Show consistency checker structured output in detail

Command Mode

  • /exec

show consistency-checker l2-tahoe sub-interface

show consistency-checker l2-tahoe sub-interface [ <if_name> ] [ brief | detail ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

l2-tahoe

Verify l2 sub-interface programming in the hardware

sub-interface

sub-interface

if_name

(Optional) Physical or Logical interface

brief

(Optional) Show consistency checker structured output in brief

detail

(Optional) Show consistency checker structured output in detail

Command Mode

  • /exec

show consistency-checker l2-tahoe sub-interface vlan

show consistency-checker l2-tahoe sub-interface vlan <vlan-id>

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

l2-tahoe

Verify l2 sub-interface programming in the hardware

sub-interface

sub-interface

vlan

Do consistency check for vlan

vlan-id

vlan number

Command Mode

  • /exec

show consistency-checker l2-tahoe switchport

show consistency-checker l2-tahoe switchport { interface { <if_name> | all } | module { <module> | all } } [ brief | detail ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

l2-tahoe

Verify l2 mac programming in the hardware

switchport

Switchport Interface

interface

interface

if_name

Physical or Logical interface

all

All switchport interfaces

module

Module to run the consistency-checker on

module

Enter module number

brief

(Optional) Show consistency checker structured output in brief

detail

(Optional) Show consistency checker structured output in detail

Command Mode

  • /exec

show consistency-checker l2 module

show consistency-checker { l2-tahoe | l2-mtc } module <module> [ unit <unit> ] [ brief | detail ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

l2-tahoe

Verify l2 mac programming in the hardware

l2-mtc

Verify l2 mac programming in the hardware

module

Module to run the consistency-checker on

module

Enter module number

unit

(Optional) Unit to run the consistency checker on

unit

(Optional) Enter unit number

brief

(Optional) Show consistency checker structured output in brief

detail

(Optional) Show consistency checker structured output in detail

Command Mode

  • /exec

show consistency-checker l2 multicast group source vlan

show consistency-checker l2 multicast group { <grp-address> | <grp-ipv6-address> } source { <src-address> | <src-ipv6-address> } vlan <vlan-id> [ debug-logs ] [ brief | detail ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

l2

Verify l2 mac programming in the hardware

multicast

multicast related information

group

Do consistency check for group

grp-address

group IP address

source

Do consistency check for source

src-address

source IP address

vlan

Do consistency check for vlan

vlan-id

vlan number

debug-logs

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

brief

(Optional) Show consistency checker structured output in brief

detail

(Optional) Show consistency checker structured output in detail

Command Mode

  • /exec

show consistency-checker l2 multicast mac vlan

show consistency-checker l2 multicast mac <mac-address> vlan <vlan-id> [ debug-logs ] [ brief | detail ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

l2

Verify l2 mac programming in the hardware

multicast

multicast related information

mac

Do consistency check for multicast mac address lookup

mac-address

mac address

vlan

Do consistency check for vlan

vlan-id

vlan number

debug-logs

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

brief

(Optional) Show consistency checker structured output in brief

detail

(Optional) Show consistency checker structured output in detail

Command Mode

  • /exec

show consistency-checker l3-interface

show consistency-checker l3-interface { all | module <moduleid> | interface { <ifid> | <ch-id> | <vlan-id> } } [ brief | detail ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

l3-interface

Compares software and hardware properties of L3 interfaces

all

Run on all modules on the switch

module

Limit display to interfaces on module

moduleid

Module number

interface

Limit display to interface

ifid

Interface name

ch-id

Port-Channel name

vlan-id

SVI VLAN

brief

(Optional) Show consistency checker structured output in brief

detail

(Optional) Show consistency checker structured output in detail

Command Mode

  • /exec

show consistency-checker l3 multicast group source vrf

show consistency-checker l3 multicast group { <grp-address> [ <mask> ] | <gprefix> | <grp-ipv6-address> } source { <src-address> | <src-ipv6-address> } vrf { <vrf-name> | <vrf-known-name> } [ debug-logs ] [ brief | detail ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

l3

l3 consistency

multicast

multicast related information

group

Do consistency check for group

grp-address

group IP address

mask

(Optional) mask for group ip address

gprefix

IPv4 Multicast Group Prefix

source

Do consistency check for source

src-address

source IP address

vrf

Do consistancy check for vrf

vrf-name

VRF name

vrf-known-name

Known VRF name

debug-logs

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

brief

(Optional) Show consistency checker structured output in brief

detail

(Optional) Show consistency checker structured output in detail

Command Mode

  • /exec

show consistency-checker link-state fabric-ieth

show consistency-checker link-state fabric-ieth { [ module <module> ] } [ brief | detail ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

link-state

Compares software and hardware link state of interfaces

fabric-ieth

Internal Fabric ports

module

(Optional) Limit display to interfaces on module

module

(Optional) Enter module number

brief

(Optional) Show consistency checker structured output in brief

detail

(Optional) Show consistency checker structured output in detail

Command Mode

  • /exec

show consistency-checker link-state module

show consistency-checker link-state { module <module> | interface <ifid> } [ brief | detail ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

link-state

Compares software and hardware link state of interfaces

module

Limit display to interfaces on module

module

Module number

interface

Limit display to interface

ifid

Interface name

brief

(Optional) Show consistency checker structured output in brief

detail

(Optional) Show consistency checker structured output in detail

Command Mode

  • /exec

show consistency-checker membership port-channels

show consistency-checker membership port-channels [ interface <ch-id> ] [ brief | detail ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

membership

Check various memberships

port-channels

Verifies port channel membership in the hardware

interface

(Optional) Port-channel number

ch-id

(Optional) Port-Channel name

brief

(Optional) Show consistency checker structured output in brief

detail

(Optional) Show consistency checker structured output in detail

Command Mode

  • /exec

show consistency-checker membership vlan

show consistency-checker membership vlan <vlanid> [ [ interface [ <intf-id> | <ch-id> ] ] | [ private-vlan [ interface [ <int-id> | <ch-id> ] ] ] ] [ native-vlan ] [ brief | detail ]

Syntax Description

show

Show running system information

vlan

Verifies vlan membership in the hardware

vlanid

Enter vlan id

consistency-checker

Consistency Checker

membership

Check various memberships

interface

(Optional) Interface

intf-id

(Optional) Interface

ch-id

(Optional) Port-Channel name

private-vlan

(Optional) Check private-vlan primary vlan

interface

(Optional) Interface

int-id

(Optional) Interface name

ch-id

(Optional) Port-Channel name

native-vlan

(Optional) Check for native vlans

brief

(Optional) Show consistency checker structured output in brief

detail

(Optional) Show consistency checker structured output in detail

Command Mode

  • /exec

show consistency-checker multicast nlb cluster-ip vrf

show consistency-checker multicast nlb cluster-ip <ip-address> vrf { <vrf-name> | <vrf-known-name> } [ debug-logs ] [ brief | detail ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

multicast

multicast related information

nlb

Do consistency check for Multicast NLB

cluster-ip

Cluster virtual unicast IP address

ip-address

Cluster IP address

vrf

Do consistancy check for vrf

vrf-name

VRF name

vrf-known-name

Known VRF name

debug-logs

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

brief

(Optional) Show consistency checker structured output in brief

detail

(Optional) Show consistency checker structured output in detail

Command Mode

  • /exec

show consistency-checker multicast vlan

show consistency-checker multicast vlan <vlanid> [ group <group_ip> | destination-mac <dst_mac> ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

multicast

Verify Multicast

vlan

Verifies vlan flood sharing

vlanid

Enter vlan id

group

(Optional) Do consistency check for a group

group_ip

(Optional) Multicast IP address of single group to display

destination-mac

(Optional) Do consistency check for a destination-mac

dst_mac

(Optional) Multicast Destination mac Address for Vlan to display

Command Mode

  • /exec

show consistency-checker niv-datapath interface

show consistency-checker niv-datapath interface <intf>

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

niv-datapath

Verify NIV Datapath for a given interface

interface

Show interface status and information

intf

Virtual interface

Command Mode

  • /exec

show consistency-checker pacl extended ingress ipv6 module

show consistency-checker pacl extended ingress ipv6 module <module-id> [ brief | detail ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

pacl

Verify pacl programming in the hardware

extended

extended

ingress

ingress direction

ipv6

ipv6 protocol

module

Limit display to L2 interfaces on this module

module-id

Enter module number

brief

(Optional) Show consistency checker structured output in brief

detail

(Optional) Show consistency checker structured output in detail

Command Mode

  • /exec

show consistency-checker pacl extended ingress ip module

show consistency-checker pacl extended ingress ip module <module-id> [ brief | detail ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

pacl

Verify pacl programming in the hardware

extended

extended

ingress

ingress direction

ip

ip protocol

module

Limit display to L2 interfaces on this module

module-id

Enter module number

brief

(Optional) Show consistency checker structured output in brief

detail

(Optional) Show consistency checker structured output in detail

Command Mode

  • /exec

show consistency-checker pacl extended ingress ip interface

show consistency-checker pacl extended ingress ip interface { <int-id> | <ch-id> } [ brief | detail ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

pacl

Verify pacl programming in the hardware

extended

extended

ingress

ingress direction

ip

ip protocol

interface

Interface

int-id

Interface

ch-id

Port-Channel name

brief

(Optional) Show consistency checker structured output in brief

detail

(Optional) Show consistency checker structured output in detail

Command Mode

  • /exec

show consistency-checker pacl extended ingress ipv6 interface

show consistency-checker pacl extended ingress ipv6 interface { <int-id> | <ch-id> } [ brief | detail ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

pacl

Verify pacl programming in the hardware

extended

extended

ingress

ingress direction

ipv6

ipv6 protocol

interface

Interface

int-id

Interface

ch-id

Port-Channel name

brief

(Optional) Show consistency checker structured output in brief

detail

(Optional) Show consistency checker structured output in detail

Command Mode

  • /exec

show consistency-checker pacl extended ingress mac interface

show consistency-checker pacl extended ingress mac interface { <int-id> | <ch-id> } [ brief | detail ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

pacl

Verify pacl programming in the hardware

extended

extended

ingress

ingress direction

mac

ethernet protocol

interface

Interface

int-id

Interface

ch-id

Port-Channel name

brief

(Optional) Show consistency checker structured output in brief

detail

(Optional) Show consistency checker structured output in detail

Command Mode

  • /exec

show consistency-checker pacl extended ingress mac module

show consistency-checker pacl extended ingress mac module <module-id> [ brief | detail ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

pacl

Verify pacl programming in the hardware

extended

extended

ingress

ingress direction

mac

ethernet protocol

module

Limit display to L2 interfaces on this module

module-id

Enter module number

brief

(Optional) Show consistency checker structured output in brief

detail

(Optional) Show consistency checker structured output in detail

Command Mode

  • /exec

show consistency-checker pacl extended module

show consistency-checker pacl extended module { all | <module-id> } [ brief | detail ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

pacl

Verify pacl programming in the hardware

extended

extended

module

Limit display to L2 interfaces on this module

all

To run cc across all the modules

module-id

Enter module number

brief

(Optional) Show consistency checker structured output in brief

detail

(Optional) Show consistency checker structured output in detail

Command Mode

  • /exec

show consistency-checker pacl module

show consistency-checker pacl module <module>

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

pacl

Verify pacl programming in the hardware

module

Limit display to L2 interfaces on this module

module

Enter module number

Command Mode

  • /exec

show consistency-checker pacl port-channels

show consistency-checker pacl port-channels [ interface <ch-id> ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

pacl

Verify pacl programming in the hardware

port-channels

Verifies port channel pacl programming in the hardware

interface

(Optional) Port-channel number

ch-id

(Optional) Port-Channel name

Command Mode

  • /exec

show consistency-checker port-state

show consistency-checker port-state [ { module <module> | interface <ifid> } ] [ brief | detail ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

port-state

Validates SI, MTU and IPG Settings

module

(Optional) Limit display to interfaces on module

module

(Optional) Enter module number

interface

(Optional) Limit display to interface

ifid

(Optional) Interface name

brief

(Optional) Show consistency checker structured output in brief

detail

(Optional) Show consistency checker structured output in detail

Command Mode

  • /exec

show consistency-checker port-state fabric-ieth

show consistency-checker port-state fabric-ieth [ module <module> [ ieth-port <ieth-port> ] ] [ brief | detail ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

port-state

Validates SI, FEC and MTU Settings

fabric-ieth

Internal Fabric ports

module

(Optional) Limit display to interfaces on module

module

(Optional) Enter module number

ieth-port

(Optional) Enter ieth-port number

ieth-port

(Optional) Enter ieth-port number

brief

(Optional) Show consistency checker structured output in brief

detail

(Optional) Show consistency checker structured output in detail

Command Mode

  • /exec

show consistency-checker qinq

show consistency-checker qinq [ interface [ <int-id> | <ch-id> ] ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

qinq

QinQ consistency checker

interface

(Optional) Interface

int-id

(Optional) Eth Interface

ch-id

(Optional) Port-Channel

Command Mode

  • /exec

show consistency-checker racl extended egress ip interface

show consistency-checker racl extended egress ip interface { <int-id> | <ch-id> | <vlan-id> } [ brief | detail ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

racl

Verify racl programming in the hardware

extended

extended

egress

egress direction

ip

ip protocol

interface

Interface

int-id

Interface

ch-id

Port-Channel name

vlan-id

SVI VLAN

brief

(Optional) Show consistency checker structured output in brief

detail

(Optional) Show consistency checker structured output in detail

Command Mode

  • /exec

show consistency-checker racl extended egress ip module

show consistency-checker racl extended egress ip module <module-id> [ brief | detail ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

racl

Verify racl programming in the hardware

extended

extended

egress

egress direction

ip

ip protocol

module

Limit display to L3 interfaces on this module

module-id

Enter module number

brief

(Optional) Show consistency checker structured output in brief

detail

(Optional) Show consistency checker structured output in detail

Command Mode

  • /exec

show consistency-checker racl extended egress ipv6 module

show consistency-checker racl extended egress ipv6 module <module-id> [ brief | detail ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

racl

Verify racl programming in the hardware

extended

extended

egress

egress direction

ipv6

ipv6 protocol

module

Limit display to L3 interfaces on this module

module-id

Enter module number

brief

(Optional) Show consistency checker structured output in brief

detail

(Optional) Show consistency checker structured output in detail

Command Mode

  • /exec

show consistency-checker racl extended egress ipv6 interface

show consistency-checker racl extended egress ipv6 interface { <int-id> | <ch-id> | <vlan-id> } [ brief | detail ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

racl

Verify racl programming in the hardware

extended

extended

egress

egress direction

ipv6

ipv6 protocol

interface

Interface

int-id

Interface

ch-id

Port-Channel name

vlan-id

SVI VLAN

brief

(Optional) Show consistency checker structured output in brief

detail

(Optional) Show consistency checker structured output in detail

Command Mode

  • /exec

show consistency-checker racl extended ingress ipv6 module

show consistency-checker racl extended ingress ipv6 module <module-id> [ brief | detail ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

racl

Verify racl programming in the hardware

extended

extended

ingress

ingress direction

ipv6

ipv6 protocol

module

Limit display to L3 interfaces on this module

module-id

Enter module number

brief

(Optional) Show consistency checker structured output in brief

detail

(Optional) Show consistency checker structured output in detail

Command Mode

  • /exec

show consistency-checker racl extended ingress ip module

show consistency-checker racl extended ingress ip module <module-id> [ brief | detail ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

racl

Verify racl programming in the hardware

extended

extended

ingress

ingress direction

ip

ip protocol

module

Limit display to L3 interfaces on this module

module-id

Enter module number

brief

(Optional) Show consistency checker structured output in brief

detail

(Optional) Show consistency checker structured output in detail

Command Mode

  • /exec

show consistency-checker racl extended ingress ip interface

show consistency-checker racl extended ingress ip interface { <int-id> | <ch-id> | <vlan-id> } [ brief | detail ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

racl

Verify racl programming in the hardware

extended

extended

ingress

ingress direction

ip

ip protocol

interface

Interface

int-id

Interface

ch-id

Port-Channel name

vlan-id

SVI VLAN

brief

(Optional) Show consistency checker structured output in brief

detail

(Optional) Show consistency checker structured output in detail

Command Mode

  • /exec

show consistency-checker racl extended ingress ipv6 interface

show consistency-checker racl extended ingress ipv6 interface { <int-id> | <ch-id> | <vlan-id> } [ brief | detail ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

racl

Verify racl programming in the hardware

extended

extended

ingress

ingress direction

ipv6

ipv6 protocol

interface

Interface

int-id

Interface

ch-id

Port-Channel name

vlan-id

SVI VLAN

brief

(Optional) Show consistency checker structured output in brief

detail

(Optional) Show consistency checker structured output in detail

Command Mode

  • /exec

show consistency-checker racl extended module

show consistency-checker racl extended module { all | <module-id> } [ brief | detail ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

racl

Verify racl programming in the hardware

extended

extended

module

Limit display to L3 interfaces on this module

all

To run CC across all the modules

module-id

Enter module number

brief

(Optional) Show consistency checker structured output in brief

detail

(Optional) Show consistency checker structured output in detail

Command Mode

  • /exec

show consistency-checker racl module

show consistency-checker racl module <module>

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

racl

Verify racl programming in the hardware

module

Limit display to L3 interfaces on this module

module

Enter module number

Command Mode

  • /exec

show consistency-checker racl port-channels

show consistency-checker racl port-channels [ interface <ch-id> ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

racl

Verify racl programming in the hardware

port-channels

Verifies port channel racl programming in the hardware

interface

(Optional) Port-channel number

ch-id

(Optional) Port-Channel name

Command Mode

  • /exec

show consistency-checker racl svi interface

show consistency-checker racl svi interface <vlan-id>

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

racl

Verify racl programming in the hardware

svi

Verifies SVI racl programming in the hardware

interface

SVI number

vlan-id

SVI VLAN

Command Mode

  • /exec

show consistency-checker segment-routing mpls

show consistency-checker segment-routing mpls { ip <ip-address> mask <ip-mask> vrf <vrf-name> | label <label> } [ brief | detail ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

segment-routing

Segment-routing

mpls

MPLS Information

ip

IP Information

ip-address

IP Address

mask

Mask Information

ip-mask

Mask Length

vrf

VRF Information

vrf-name

VRF Name

label

Label Information

label

Label Name

brief

(Optional) Show consistency checker structured output in brief

detail

(Optional) Show consistency checker structured output in detail

Command Mode

  • /exec

show consistency-checker selective-qinq

show consistency-checker selective-qinq

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

selective-qinq

Selective QinQ consistency checker

Command Mode

  • /exec

show consistency-checker selective-qinq interface

show consistency-checker selective-qinq interface { <int-id> | <ch-id> }

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

selective-qinq

Selective QinQ consistency checker

interface

Interface

int-id

Interface

ch-id

Port-Channel name

Command Mode

  • /exec

show consistency-checker sflow

show consistency-checker sflow [ brief | detail ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

sflow

Compares software and hardware sflow details

brief

(Optional) Show consistency checker structured output in brief

detail

(Optional) Show consistency checker structured output in detail

Command Mode

  • /exec

show consistency-checker storm-control

show consistency-checker storm-control

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

storm-control

Storm control consistency checker

Command Mode

  • /exec

show consistency-checker stp-state vlan

show consistency-checker stp-state vlan <vlan> [ interface <int-id> ] [ brief | detail ]

Syntax Description

show

Show running system information

vlan

Verifies spanning tree state in the hardware for all interfaces in the vlan

vlan

Enter vlan id

interface

(Optional) Interface

int-id

(Optional) Interface

consistency-checker

Consistency Checker

stp-state

Verify spanning tree state in the hardware

brief

(Optional) Show consistency checker structured output in brief

detail

(Optional) Show consistency checker structured output in detail

Command Mode

  • /exec

show consistency-checker vacl

show consistency-checker vacl

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

vacl

Verify vacl programming in the hardware

Command Mode

  • /exec

show consistency-checker vacl extended ingress ip vlan

show consistency-checker vacl extended ingress ip vlan <vlan-id> [ brief | detail ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

vacl

Verify vacl programming in the hardware

extended

extended

ingress

ingress direction

ip

ip protocol

vlan

VLAN

vlan-id

vlan number

brief

(Optional) Show consistency checker structured output in brief

detail

(Optional) Show consistency checker structured output in detail

Command Mode

  • /exec

show consistency-checker vacl extended ingress ipv6 vlan

show consistency-checker vacl extended ingress ipv6 vlan <vlan-id> [ brief | detail ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

vacl

Verify vacl programming in the hardware

extended

extended

ingress

ingress direction

ipv6

ipv6 protocol

vlan

VLAN

vlan-id

vlan number

brief

(Optional) Show consistency checker structured output in brief

detail

(Optional) Show consistency checker structured output in detail

Command Mode

  • /exec

show consistency-checker vacl extended ingress mac vlan

show consistency-checker vacl extended ingress mac vlan <vlan-id> [ brief | detail ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

vacl

Verify vacl programming in the hardware

extended

extended

ingress

ingress direction

mac

ethernet protocol

vlan

VLAN

vlan-id

vlan number

brief

(Optional) Show consistency checker structured output in brief

detail

(Optional) Show consistency checker structured output in detail

Command Mode

  • /exec

show consistency-checker vpc

show consistency-checker vpc [ source-interface [ <int-id> | <ch-id> ] ] [ brief | detail ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

vpc

vPC related information

source-interface

(Optional) Source vPC member

int-id

(Optional) Eth Interface

ch-id

(Optional) Port-Channel

brief

(Optional) Show consistency checker structured output in brief

detail

(Optional) Show consistency checker structured output in detail

Command Mode

  • /exec

show consistency-checker vpgrouping interface

show consistency-checker vpgrouping interface { <intf> | all }

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

vpgrouping

Show VP Grouping Info

interface

Show interface status and information

intf

Physical or Logical Interface

all

Display All Interfaces

Command Mode

  • /exec

show consistency-checker vxlan config-check

show consistency-checker vxlan config-check [ verbose-mode ] [ brief | detail ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

vxlan

VxLAN consistency checker

config-check

Check the inconsistencies in the config

verbose-mode

(Optional) config-check verbose

brief

(Optional) Show consistency checker structured output in brief

detail

(Optional) Show consistency checker structured output in detail

Command Mode

  • /exec

show consistency-checker vxlan infra

show consistency-checker vxlan infra [ verbose-mode ] [ brief | detail ]

Syntax Description

show

Show running system information

vxlan

VxLAN consistency checker

consistency-checker

Consistency Checker

infra

infra

verbose-mode

(Optional) detailed CC output

brief

(Optional) Show consistency checker structured output in brief

detail

(Optional) Show consistency checker structured output in detail

Command Mode

  • /exec

show consistency-checker vxlan l2 mac-address module

show consistency-checker vxlan l2 mac-address <mac-addr> module <module> [ brief | detail ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

vxlan

VxLAN consistency checker

l2

l2

mac-address

MAC address

mac-addr

address

module

Module to run the consistency-checker on

module

Module number

brief

(Optional) Show consistency checker structured output in brief

detail

(Optional) Show consistency checker structured output in detail

Command Mode

  • /exec

show consistency-checker vxlan l2 module

show consistency-checker vxlan l2 module <module> [ brief | detail ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

vxlan

VxLAN consistency checker

l2

Check L2 inconsistencies

module

Module to run the consistency-checker on

module

Enter module number

brief

(Optional) Show consistency checker structured output in brief

detail

(Optional) Show consistency checker structured output in detail

Command Mode

  • /exec

show consistency-checker vxlan l3 single-route ipv4 vrf

show consistency-checker vxlan l3 single-route { ipv4 | ipv6 } <ip-prefix> vrf { <vrf-name> | <vrf-known-name> } [ debug-logs ] [ brief | detail ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

vxlan

VxLAN consistency checker

l3

l3

single-route

Run the consistency checker for a single route

ipv4

IPv4 address

ipv6

IPv6 address

ip-prefix

Overlay L3 Route IP Address in prefix/mask format

vrf

Do consistancy check for vrf

vrf-name

VRF name

vrf-known-name

Known VRF name

debug-logs

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

brief

(Optional) Show consistency checker structured output in brief

detail

(Optional) Show consistency checker structured output in detail

Command Mode

  • /exec

show consistency-checker vxlan l3 vrf start

show consistency-checker vxlan l3 vrf { <vrf-name> | all } { start-scan | report }

Syntax Description

show

Show running system information

vxlan

VxLAN consistency checker

consistency-checker

Consistency Checker

l3

l3

vrf

VRF

vrf-name

vrf name

all

All VRFs

start-scan

Start Route CC

report

Show Route CC report

Command Mode

  • /exec

show consistency-checker vxlan mh mac-addresses

show consistency-checker vxlan mh mac-addresses [ brief | detail ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

vxlan

VxLAN consistency checker

mh

VxLAN BGP EVPN Multi Homing CC commands

mac-addresses

Check mac address consistency between L2RIB and L2FM

brief

(Optional) Show consistency checker structured output in brief

detail

(Optional) Show consistency checker structured output in detail

Command Mode

  • /exec

show consistency-checker vxlan mh pathlist

show consistency-checker vxlan mh pathlist [ brief | detail ]

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

vxlan

VxLAN consistency checker

mh

VxLAN BGP EVPN Multi Homing CC commands

pathlist

Check Vxlan BGP EVPN MH Control plane and resultant pathlists consistency

brief

(Optional) Show consistency checker structured output in brief

detail

(Optional) Show consistency checker structured output in detail

Command Mode

  • /exec

show consistency-checker vxlan pv

show consistency-checker vxlan pv

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

vxlan

VxLAN consistency checker

pv

pv consistency checker

Command Mode

  • /exec

show consistency-checker vxlan qinq-qinvni

show consistency-checker vxlan qinq-qinvni

Syntax Description

show

Show running system information

vxlan

VxLAN consistency checker

consistency-checker

Consistency Checker

qinq-qinvni

QinQ consistency checker

Command Mode

  • /exec

show consistency-checker vxlan qinvni

show consistency-checker vxlan qinvni

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

vxlan

VxLAN consistency checker

qinvni

QinVNI consistency checker

Command Mode

  • /exec

show consistency-checker vxlan selective-qinvni