Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 10.2(x)

show fabric-binding database

show fabric-binding database [ { active [ vsan <i0> ] | vsan1 <i1> } ]

Syntax Description


show	Show running system information
fabric-binding	Show Fabric Binding
database	Show Fabric Binding Configured database
active	(Optional) Activated Fabric Bindings
vsan	(Optional) VSAN id
i0	(Optional) VSAN range
vsan1	(Optional) VSAN id
i1	(Optional) VSAN range

Command Mode

/exec

show fabric-binding efmd statistics

show fabric-binding efmd statistics [ vsan <i0> ]

Syntax Description


show	Show running system information
fabric-binding	Show Fabric Binding
efmd	Exchange Fabric Membership Data
statistics	EFMD protocol statistics
vsan	(Optional) VSAN id
i0	(Optional) VSAN range

Command Mode

/exec

show fabric-binding fip

Syntax Description


show	Show running system information
fabric-binding	Fabric Binding configuration
fip	Display the enabled FIP

Command Mode

/exec

show fabric-binding statistics

show fabric-binding statistics [ vsan <i0> ]

Syntax Description


show	Show running system information
fabric-binding	Show Fabric Binding
statistics	Statistics of Fabric Binding
vsan	(Optional) VSAN Id
i0	(Optional) VSAN range

Command Mode

/exec

show fabric-binding status

show fabric-binding status [ vsan <i0> ]

Syntax Description


show	Show running system information
fabric-binding	Show Fabric Binding
status	Fabric binding Status
vsan	(Optional) VSAN Id
i0	(Optional) VSAN range

Command Mode

/exec

show fabric-binding violations

show fabric-binding violations [ last <i0> ]

Syntax Description


show	Show running system information
fabric-binding	Show Fabric Binding
violations	Violations of Fabric Binding policies
last	(Optional) Latest n violations
i0	(Optional) Violation number

Command Mode

/exec

show fabric database dci

show fabric database dci [ { vrf { <vrf-name> | <vrf-known-name> } [ peer-id <peer-ip-address> ] [ detail ] } ] [ __readonly__ [ TABLE_database_dci <vrf_name> <state> <flags> <profile> <instance> ] [ TABLE_database_dci_detail <packet_arrival_time> <sent_to_database_manager_at> <received_parameters_from_database_manager_at> <sent_apply_to_configuration_manager_at> <completed_executing_all_commands_at> <sent_un_apply_to_configuration_manager_at> <completed_unapplying_all_commands_at> ] ]

Syntax Description


show	Show running system information
fabric	Fabric
database	Fabric Database
dci	DCI Profile Database
vrf	(Optional) Display per-VRF information
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
peer-id	(Optional) management ip address of peer
peer-ip-address	(Optional) IP address in CIDR format
detail	(Optional) Show detailed information
__readonly__	(Optional) Read Only
TABLE_database_dci	(Optional) table show fabric database dci
vrf_name	(Optional)
state	(Optional)
flags	(Optional)
profile	(Optional)
instance	(Optional)
TABLE_database_dci_detail	(Optional) detail for table show fabric database dci
packet_arrival_time	(Optional) Profile request time
sent_to_database_manager_at	(Optional) Profile request sent to DCNM
received_parameters_from_database_manager_at	(Optional) Profile downloaded from DCNM
sent_apply_to_configuration_manager_at	(Optional) Profile sent to PPM to apply
completed_executing_all_commands_at	(Optional) Profile applied by PPM
sent_un_apply_to_configuration_manager_at	(Optional) Profile un-apply sent to PPM
completed_unapplying_all_commands_at	(Optional) Profile un-applied by PPM

Command Mode

/exec

show fabric database host

show fabric database host [ detail ] [ { vni <vni-id> } | { dot1q <vlan-id> } ] [ __readonly__ [ TABLE_database_host [ <trigger_source> ] [ <client_type> ] [ <got_trigger_at> ] [ <number_of_client_hosts> ] [ <number_of_associated_interfaces> ] [ <profile_be_un_applied_in_seconds> ] [ <new_vdp_requests_be_accepted_in_seconds> ] [ <recovered_profile_be_checked_for_validity_in_seconds> ] [ <mac_aging_checked_in_seconds> ] [ <sent_to_database_manager_at> ] [ <received_parameters_from_database_manager_at> ] [ <displaying_parameters_for_profile> ] [ <displaying_parameters_for_instance> ] [ <no_parameters_for_the_profile> ] [ <displaying_re_written_parameters_for_vpc_role> ] [ TABLE_parameter [ <parameter_index> ] [ <parameter> ] ] [ TABLE_static_profile <profile> <instance> <no_parameters_for_the_profile> ] [ TABLE_migrated_profile <profile> <instance_index> <previous_profile> <previous_instance_index> ] [ TABLE_rollback_profile <profile> <instance_index> ] [ <got_vlan_allocated_from_vlan_manager_at> ] [ <sent_apply_to_configuration_manager_at> ] [ <completed_executing_all_commands_at> ] [ <sent_to_vpc_peer_at> ] [ <completed_executing_all_commands_on_vpc_peer_at> ] [ <sent_un_apply_to_configuration_manager_at> ] [ <completed_unapplying_all_commands_at> ] ] [ TABLE_database_host_vni { [ <vni_id> ] [ <vlan_id> ] [ <state> <flag> <profile_name> <instance_name> ] [ <packet_arrival_time> <request_profile_time> <got_profile_time> <sent_to_PPM_time> <profile_apply_time> <del_to_PPM_time> ] [ { TABLE_database_host_detail <interface> <encap> <flags> <state> [ <vsi_id> ] [ <client> ] [ <host> ] } ] } ] [ TABLE_database_host_vlan { [ <vlan_id> ] [ <vni_id> ] [ <state> <flag> <profile_name> <instance_name> ] [ <packet_arrival_time> <request_profile_time> <got_profile_time> <sent_to_PPM_time> <profile_apply_time> <del_to_PPM_time> ] [ { TABLE_database_host_detail <interface> <encap> <flags> <state> [ <vsi_id> ] } ] } ] [ TABLE_extranet_vrf_entries { <vrf> <l3_vni> <state> <profile> <instance> } ] ]

Syntax Description


show	Show running system information
fabric	Fabric
database	Fabric Database
host	Host to profile mapping
detail	(Optional) Show hosts and interfaces
vni	(Optional) Virtual Network Identifier
vni-id	(Optional)
dot1q	(Optional) Dot1Q Encapsulation
vlan-id	(Optional)
__readonly__	(Optional) Read Only
TABLE_database_host	(Optional) table show fabric database host {dot1q \| vni}
trigger_source	(Optional) TODO
client_type	(Optional) TODO
got_trigger_at	(Optional) TODO
number_of_client_hosts	(Optional) TODO
number_of_associated_interfaces	(Optional) TODO
profile_be_un_applied_in_seconds	(Optional) TODO
new_vdp_requests_be_accepted_in_seconds	(Optional) TODO
recovered_profile_be_checked_for_validity_in_seconds	(Optional) TODO
mac_aging_checked_in_seconds	(Optional) TODO
sent_to_database_manager_at	(Optional) TODO
received_parameters_from_database_manager_at	(Optional) TODO
displaying_parameters_for_profile	(Optional) TODO
displaying_parameters_for_instance	(Optional) TODO
no_parameters_for_the_profile	(Optional) TODO
displaying_re_written_parameters_for_vpc_role	(Optional) TODO
TABLE_parameter	(Optional) table show the parameters
parameter_index	(Optional) TODO
parameter	(Optional) TODO
TABLE_static_profile	(Optional) show static profile
profile	(Optional) TODO
instance	(Optional) TODO
no_parameters_for_the_profile	(Optional) TODO
TABLE_migrated_profile	(Optional) show migrated profile
profile	(Optional) TODO
instance_index	(Optional) TODO
previous_profile	(Optional) TODO
previous_instance_index	(Optional) TODO
TABLE_rollback_profile	(Optional) show rollback profile
profile	(Optional) TODO
instance_index	(Optional) TODO
got_vlan_allocated_from_vlan_manager_at	(Optional) TODO
sent_apply_to_configuration_manager_at	(Optional) TODO
completed_executing_all_commands_at	(Optional) TODO
sent_to_vpc_peer_at	(Optional) TODO
completed_executing_all_commands_on_vpc_peer_at	(Optional) TODO
sent_un_apply_to_configuration_manager_at	(Optional) TODO
completed_unapplying_all_commands_at	(Optional) TODO
TABLE_database_host_vni	(Optional) table show fabric database host vni based
vni_id	(Optional) TODO Add comment
vlan_id	(Optional) TODO Add comment
state	(Optional) TODO Add comment
flag	(Optional) TODO
profile_name	(Optional) TODO
instance_name	(Optional) TODO
packet_arrival_time	(Optional) TODO
request_profile_time	(Optional) TODO
got_profile_time	(Optional) TODO
sent_to_PPM_time	(Optional) TODO
profile_apply_time	(Optional) TODO
del_to_PPM_time	(Optional) TODO
TABLE_database_host_detail	(Optional) table show fabric database host detail
interface	(Optional) TODO
encap	(Optional) TODO
flags	(Optional) TODO
state	(Optional) TODO
vsi_id	(Optional) TODO
client	(Optional) TODO
host	(Optional) TODO
TABLE_database_host_vlan	(Optional) table show fabric database host vlan based
vlan_id	(Optional) TODO Add comment
vni_id	(Optional) TODO Add comment
state	(Optional) TODO Add comment
flag	(Optional) TODO
profile_name	(Optional) TODO
instance_name	(Optional) TODO
packet_arrival_time	(Optional) TODO
request_profile_time	(Optional) TODO
got_profile_time	(Optional) TODO
sent_to_PPM_time	(Optional) TODO
profile_apply_time	(Optional) TODO
del_to_PPM_time	(Optional) TODO
TABLE_database_host_detail	(Optional) table show fabric database host detail
interface	(Optional) TODO
encap	(Optional) TODO
flags	(Optional) TODO
state	(Optional) TODO
vsi_id	(Optional) TODO
TABLE_extranet_vrf_entries	(Optional) table extranet VRF entries
vrf	(Optional) TODO
l3_vni	(Optional) TODO
state	(Optional) TODO
profile	(Optional) TODO
instance	(Optional) TODO

Command Mode

/exec

show fabric database host statistics

show fabric database host statistics [ __readonly__ [ TABLE_database_host_statistics { [ <data_snoop_triggers> ] [ <data_snoop_deletes> ] [ <data_snoop_responses> ] [ <vdp_association_requests> ] [ <vdp_deassociation_requests> ] [ <vdp_association_responses> ] [ <vdp_error_responses> ] [ <unsupported_interfaces> ] [ <no_profile_map_errors> ] [ <outstanding_delete_retry_add> ] [ <duplicate_add_existing_host> ] [ <hmm_api_error_cannot_add_host> ] [ <existing_profile_new_host> ] [ <profile_apply_from_vpc_peer> ] [ <profile_un_apply_from_vpc_peer> ] [ <host_apply_from_vpc_peer> ] [ <host_un_apply_from_vpc_peer> ] [ <early_delete_cancel_add> ] [ <dhcp_requests> ] [ <dhcp_responses> ] [ <dhcp_error_responses> ] [ <adbm_requests> ] [ <adbm_responses> ] [ <adbm_error_responses> ] [ <adbm_error_requests> ] [ <adbm_db_notifications> ] [ <vnseg_no_bridge_domain> ] [ <vnseg_encap_responses> ] [ <vnseg_vni_responses> ] [ <vnseg_unknown_responses> ] [ <vnseg_bd_down_notif> ] [ <bd_mgr_requests> ] [ <bd_mgr_success_responses> ] [ <bd_mgr_failure_responses> ] [ <bd_mgr_unreserve> ] [ <bd_mgr_inconsistencies> ] [ <no_mac_on_bd_notif> ] [ <refresh_failures> ] [ <profile_apply_received> ] [ <profile_vpc_queued> ] [ <profile_local_apply_queued> ] [ <profile_local_unapply_queued> ] [ <profile_apply_sent> ] [ <profile_apply_responses> ] [ <profile_apply_success> ] [ <profile_unapply_success> ] [ <profile_apply_failure> ] [ <profile_commands> ] [ <profile_error_incomplete_configs> ] [ <profile_api_error> ] [ <profile_unapply_sent> ] [ <profile_top_queue_adds> ] [ <profile_high_queue_adds> ] [ <profile_low_queue_adds> ] [ <profile_unapply_failure> ] [ <outstanding_vlan_requests> ] [ <outstanding_adbm_requests> ] [ <outstanding_profile_applies> ] [ <outstanding_vpc_profile_applies> ] [ <node_recon_pending> ] [ <node_recon_attempts> ] [ <node_recon_failures> ] } ] ]

Syntax Description


show	Show running system information
fabric	Fabric
database	Fabric Database
host	Auto-configured Hosts
statistics	Statistics - Mostly shows non-zero values
__readonly__	(Optional) Read Only
TABLE_database_host_statistics	(Optional) table show fabric database host statistics
data_snoop_triggers	(Optional) TODO
data_snoop_deletes	(Optional) TODO
data_snoop_responses	(Optional) TODO
vdp_association_requests	(Optional) TODO
vdp_deassociation_requests	(Optional) TODO
vdp_association_responses	(Optional) TODO
vdp_error_responses	(Optional) TODO
unsupported_interfaces	(Optional) TODO
no_profile_map_errors	(Optional) TODO
outstanding_delete_retry_add	(Optional) TODO
duplicate_add_existing_host	(Optional) TODO
hmm_api_error_cannot_add_host	(Optional) TODO
existing_profile_new_host	(Optional) TODO
profile_apply_from_vpc_peer	(Optional) TODO
profile_un_apply_from_vpc_peer	(Optional) TODO
host_apply_from_vpc_peer	(Optional) TODO
host_un_apply_from_vpc_peer	(Optional) TODO
early_delete_cancel_add	(Optional) TODO
dhcp_requests	(Optional) TODO
dhcp_responses	(Optional) TODO
dhcp_error_responses	(Optional) TODO
adbm_requests	(Optional) TODO
adbm_responses	(Optional) TODO
adbm_error_responses	(Optional) TODO
adbm_error_requests	(Optional) TODO
adbm_db_notifications	(Optional) TODO
vnseg_no_bridge_domain	(Optional) TODO
vnseg_encap_responses	(Optional) TODO
vnseg_vni_responses	(Optional) TODO
vnseg_unknown_responses	(Optional) TODO
vnseg_bd_down_notif	(Optional) TODO
bd_mgr_requests	(Optional) TODO
bd_mgr_success_responses	(Optional) TODO
bd_mgr_failure_responses	(Optional) TODO
bd_mgr_unreserve	(Optional) TODO
bd_mgr_inconsistencies	(Optional) TODO
no_mac_on_bd_notif	(Optional) TODO
refresh_failures	(Optional) TODO
profile_apply_received	(Optional) TODO
profile_vpc_queued	(Optional) TODO
profile_local_apply_queued	(Optional) TODO
profile_local_unapply_queued	(Optional) TODO
profile_apply_sent	(Optional) TODO
profile_apply_responses	(Optional) TODO
profile_apply_success	(Optional) TODO
profile_unapply_success	(Optional) TODO
profile_apply_failure	(Optional) TODO
profile_commands	(Optional) TODO
profile_error_incomplete_configs	(Optional) TODO
profile_api_error	(Optional) TODO
profile_unapply_sent	(Optional) TODO
profile_top_queue_adds	(Optional) TODO
profile_high_queue_adds	(Optional) TODO
profile_low_queue_adds	(Optional) TODO
profile_unapply_failure	(Optional) TODO
outstanding_vlan_requests	(Optional) TODO
outstanding_adbm_requests	(Optional) TODO
outstanding_profile_applies	(Optional) TODO
outstanding_vpc_profile_applies	(Optional) TODO
node_recon_pending	(Optional) TODO
node_recon_attempts	(Optional) TODO
node_recon_failures	(Optional) TODO

Command Mode

/exec

show fabric database host summary

show fabric database host summary [ __readonly__ [ TABLE_database_host_summary { <number_of_instances_applied> <number_of_client_hosts> <recovery_timeout_minute> <cleanup_timeout_minute> <client_add_suppression_timeout_minute> <mac_aging_timeout_minute> <autoid_support> } ] ]

Syntax Description


show	Show running system information
fabric	Fabric
database	Fabric Database
host	Auto-configured Hosts
summary	Summary
__readonly__	(Optional) Read Only
TABLE_database_host_summary	(Optional) table show fabric database host summary
number_of_instances_applied	(Optional) TODO
number_of_client_hosts	(Optional) TODO
recovery_timeout_minute	(Optional) TODO
cleanup_timeout_minute	(Optional) TODO
client_add_suppression_timeout_minute	(Optional) TODO
mac_aging_timeout_minute	(Optional) TODO
autoid_support	(Optional) List of supported auto-generate ids

Command Mode

/exec

show fabric database profile-map

show fabric database profile-map { global | [ <id> | interface <interface-id> ] } [ __readonly__ [ TABLE_database_profile_map { <map> <proto> <vni> <dot1q> <flags> <profile_name> } ] ]

Syntax Description


show	Show running system information
fabric	Fabric
database	Fabric Database
profile-map	Profile Map
global	Global profile (apply to all interfaces)
id	(Optional) Profile Map ID
interface	(Optional) Specified interface to display
interface-id	(Optional) Name of interface
__readonly__	(Optional) Read Only
TABLE_database_profile_map	(Optional) table show fabric database profile-map
map	(Optional) TODO
proto	(Optional) TODO
vni	(Optional) TODO
dot1q	(Optional) TODO
flags	(Optional) TODO
profile_name	(Optional) TODO

Command Mode

/exec

show fabric database static-host

show fabric database static-host [ __readonly__ { TABLE_database_static_host <host_key> <interface> <state> <retry_delay> <retry_attempts> } ]

Syntax Description


show	Show running system information
fabric	Fabric
database	Fabric Database
static-host	Configured Static Hosts
__readonly__	(Optional) Read Only
TABLE_database_static_host	(Optional) table show fabric database static-host
host_key	(Optional) static-host key
interface	(Optional) interface name
state	(Optional) static-host state
retry_delay	(Optional) seconds until next retry
retry_attempts	(Optional) cumulative retry attempts

Command Mode

/exec

show fabric database statistics

show fabric database statistics [ type { network | profile | cabling | partition | bl-dci | host } ] [ __readonly__ { TABLE_types <dbtype> <requests> <dispatched> <not_dispatched> <re_dispatched> } [ { TABLE_dbs <is_active> <type> <prot> <serverdb> [ <reqs> <ok> <nores> <err> <tmout> <pend> ] } ] { LastPollTime <poll_time> } { LastUpdateTime <update_time> } [ { TABLE_updates <update_type> <update_status> } ] ]

Syntax Description


show	Show running system information
fabric	Fabric
database	Show Fabric Database
statistics	Show database statistics
type	(Optional) Enter database type
network	(Optional) Network Database
profile	(Optional) Port or Switch Profile Database
cabling	(Optional) Cable Management Database
partition	(Optional) Partition Database
bl-dci	(Optional) Border Leaf - DCI
host	(Optional) Host
__readonly__	(Optional)
TABLE_types	(Optional) totals by type
dbtype	(Optional) type of database
requests	(Optional) number of requests
dispatched	(Optional) number dispatched
not_dispatched	(Optional) number not dispatched
re_dispatched	(Optional) number re-dispatched
TABLE_dbs	(Optional) per-database stats
is_active	(Optional) active/inactive
type	(Optional) database type
prot	(Optional) database protocol
serverdb	(Optional) server database
reqs	(Optional) requests
ok	(Optional) OK
nores	(Optional) nores
err	(Optional) err
tmout	(Optional) tmout
pend	(Optional) pend
LastPollTime	(Optional) last poll time
poll_time	(Optional) poll time
LastUpdateTime	(Optional) last update time for db status change
update_time	(Optional) update time
TABLE_updates	(Optional) totals ty type
update_type	(Optional) db type
update_status	(Optional) db status

Command Mode

/exec

show fabric forwarding host-db

show fabric forwarding host-db [ { vrf { <vrf-name> | <vrf-known-name> | all } } ] [ __readonly__ [ TABLE_forwarding_host_db_vrf { <vrf> <vrf_id> <vrf_state> <vrf_reason> <vni_id> <refcount> <conversational_learning> [ TABLE_limit_type <limit_type> <enable> <threshold> <action> ] [ TABLE_ipv4 <address_family> <vrf> <table_id> <table_state> <refcount> <local_hosts> <remote_hosts> <aggregates> [ TABLE_aggregate_list <aggregate_subnet_prefix_list> <aggregate_subnet_prefix_state> ] ] [ TABLE_ipv6 <address_family> <vrf> <table_id> <table_state> <refcount> <local_hosts> <remote_hosts> <aggregates> [ TABLE_aggregate_list <aggregate_subnet_prefix_list> <aggregate_subnet_prefix_state> ] ] } ] ]

Syntax Description


show	Show running system information
fabric	Fabric
forwarding	Fabric Forwarding Protocol: Host Mobility Manager (HMM)
host-db	Host Database info
vrf	(Optional) Display per-VRF information
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
all	(Optional) Display information for all VRFs
__readonly__	(Optional) Read Only
TABLE_forwarding_host_db_vrf	(Optional) table show fabric forwarding host-db vrf
vrf	(Optional) TODO
vrf_id	(Optional) TODO
vrf_state	(Optional) TODO
vrf_reason	(Optional) TODO
vni_id	(Optional) TODO
refcount	(Optional) TODO
conversational_learning	(Optional) TODO
TABLE_limit_type	(Optional) table for limit type
limit_type	(Optional) TODO
enable	(Optional) TODO
threshold	(Optional) TODO
action	(Optional) TODO
TABLE_ipv4	(Optional) Information for address family IPv4
address_family	(Optional) TODO
vrf	(Optional) TODO
table_id	(Optional) TODO
table_state	(Optional) TODO
refcount	(Optional) TODO
local_hosts	(Optional) TODO
remote_hosts	(Optional) TODO
aggregates	(Optional) TODO
TABLE_aggregate_list	(Optional) table for aggregate subnet prefix list
aggregate_subnet_prefix_list	(Optional) TODO
TABLE_ipv6	(Optional) Information for address family IPv6
address_family	(Optional) TODO
vrf	(Optional) TODO
table_id	(Optional) TODO
table_state	(Optional) TODO
refcount	(Optional) TODO
local_hosts	(Optional) TODO
remote_hosts	(Optional) TODO
aggregates	(Optional) TODO
TABLE_aggregate_list	(Optional) table for aggregate subnet prefix list
aggregate_subnet_prefix_list	(Optional) TODO
aggregate_subnet_prefix_state	(Optional) TODO

Command Mode

/exec

show fabric forwarding ip local

show fabric forwarding ip { local-host-db [ { vrf { <vrf-name> | <vrf-known-name> | all } } ] [ <ip-prefix> ] } [ __readonly__ [ TABLE_forwarding_ip_local_host_db_vrf { <hmm_host> <vrf> <status_in> { TABLE_hosts <host> <mac_address> <svi> <flags_0x> <physical_interface> <status> } } ] ]

Syntax Description


show	Show running system information
fabric	Fabric
forwarding	Fabric Forwarding Protocol: Host Mobility Manager (HMM)
ip	Display IP information
local-host-db	HMM Local Host Database
vrf	(Optional) Display per-VRF information
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
all	(Optional) Display information for all VRFs
ip-prefix	(Optional) IP prefix in CIDR format
__readonly__	(Optional) Read Only
TABLE_forwarding_ip_local_host_db_vrf	(Optional) table show fabric forwarding ip local-host-db vrf
hmm_host	(Optional) TODO
vrf	(Optional) TODO
status_in	(Optional) TODO
TABLE_hosts	(Optional) table show information for each hosts
host	(Optional) TODO
mac_address	(Optional) TODO
svi	(Optional) TODO
flags_0x	(Optional) TODO
physical_interface	(Optional) TODO
status	(Optional) *-valid, x-deleted, a-aged out, c-cleaned

Command Mode

/exec

show fabric forwarding ipv6 local

show fabric forwarding ipv6 { local-host-db [ { vrf { <vrf-name> | <vrf-known-name> | all } } ] [ <ipv6-prefix> ] } [ __readonly__ [ TABLE_forwarding_ipv6_local_host_db_vrf { <hmm_host> <vrf> <status_in> { TABLE_hosts <host> <mac_address> <svi> <flags_0x> <physical_interface> <status> } } ] ]

Syntax Description


show	Show running system information
fabric	Fabric
forwarding	Fabric Forwarding Protocol: Host Mobility Manager (HMM)
ipv6	Display IPv6 information
local-host-db	HMM Local Host Database
vrf	(Optional) Display per-VRF information
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
all	(Optional) Display information for all VRFs
__readonly__	(Optional) Read Only
TABLE_forwarding_ipv6_local_host_db_vrf	(Optional) table show fabric forwarding ipv6 local-host-db vrf
hmm_host	(Optional) TODO
vrf	(Optional) TODO
status_in	(Optional) TODO
TABLE_hosts	(Optional) table show information for each hosts
host	(Optional) TODO
mac_address	(Optional) TODO
svi	(Optional) TODO
flags_0x	(Optional) TODO
physical_interface	(Optional) TODO
status	(Optional) *-valid, x-deleted, a-aged out, c-cleaned

Command Mode

/exec

show fabric multicast globals

show fabric multicast globals [ __readonly__ [ <pruning> ] [ <switch_role> ] [ <fabric_control_seg> ] [ <peer_fabric_ctrl_addr> ] [ <advertise_vpc_rpf_routes> ] [ <created_vni_list> ] [ <fwd_encap> ] [ <mrib_sync_delay> ] [ <bgp_eor_rcvd> ] [ <bgp_eor_rcvd_ts> ] [ <cli_done_rcvd> ] [ <cli_done_rcvd_ts> ] [ <local_nlri_req> ] [ <dist_dr> ] [ <dist_pending> ] [ <spt_only> ] [ <pim_trm_bl> ] [ <pim6_trm_bl> ] [ <l2_trm_evpn> ] ]

Syntax Description


show	Show running system information
fabric	Fabric
multicast	Multicast information
globals	show the global settings
__readonly__	(Optional)
pruning	(Optional)
switch_role	(Optional)
fabric_control_seg	(Optional)
peer_fabric_ctrl_addr	(Optional)
advertise_vpc_rpf_routes	(Optional)
created_vni_list	(Optional)
fwd_encap	(Optional)
mrib_sync_delay	(Optional)
bgp_eor_rcvd	(Optional)
bgp_eor_rcvd_ts	(Optional)
cli_done_rcvd	(Optional)
cli_done_rcvd_ts	(Optional)
local_nlri_req	(Optional)
dist_dr	(Optional)
dist_pending	(Optional)
spt_only	(Optional)
pim_trm_bl	(Optional)
pim6_trm_bl	(Optional)
l2_trm_evpn	(Optional)

Command Mode

/exec

show fabric multicast ipv4 l2 vni

show fabric multicast { ipv4 | ipv6 } { l2-mroute } vni { <vni-id> | all } [ __readonly__ TABLE_vni <vnid> [ TABLE_mroute <mroute_desc> [ TABLE_fabric <fabric_node_addr> ] ] ]

Syntax Description


show	Show running system information
fabric	Fabric
multicast	Multicast information
ipv4	Display IP information
ipv6	Display IPv6 information
l2-mroute	display l2-mroute status
vni	Virtual Network Identifier
vni-id	VNI number
all	Display all L2 VNI NGMVPN is aware of
__readonly__	(Optional)
TABLE_vni	(Optional)
vnid	(Optional)
TABLE_mroute	(Optional)
mroute_desc	(Optional)
TABLE_fabric	(Optional)
fabric_node_addr	(Optional)

Command Mode

/exec

show fabric multicast statistics

show fabric multicast statistics [ __readonly__ [ <remote_nlri_msgs_rx> ] [ <remote_nlri_msgs_rx_fail> ] [ <local_nlri_msgs_tx> ] [ <local_nlri_msgs_tx_fail> ] [ <import_rt_msgs_tx> ] [ <import_rt_msgs_tx_fail> ] [ <m2rib_msgs_tx> ] [ <m2rib_msgs_tx_fail> ] [ <mrib_msgs_tx> ] [ <mrib_msgs_tx_fail> ] [ <m6rib_msgs_tx> ] [ <m6rib_msgs_tx_fail> ] [ <pim_msgs_tx> ] [ <pim_msgs_tx_fail> ] [ <pim_msgs_rx> ] [ <pim_all_remote_ssm_rp_req_rx> ] [ <pim6_msgs_tx> ] [ <pim6_msgs_tx_fail> ] [ <pim6_msgs_rx> ] [ <pim6_all_remote_ssm_rp_req_rx> ] [ <remote_nlri_ack_tx> ] [ <remote_nlri_ack_tx_fail> ] [ <all_local_nlri_req_rx> ] [ <local_nlri_ack_rx> ] [ <remote_route_req_tx> ] [ <remote_route_req_tx_fail> ] [ <pim6_all_local_ssm_rp_req_tx> ] [ <pim6_all_local_ssm_rp_req_tx_fail> ] [ <igmp_local_route_rx> ] [ <igmp_local_route_ack_rx> ] [ <igmp_msgs_tx> ] [ <igmp_msgs_tx_fail> ] [ <igmp_l2_vni_up_down_rx> ] [ <mts_q_high_warning_rx> ] [ <mts_q_full_warning_rx> ] ]

Syntax Description


show	Show running system information
fabric	Fabric
multicast	Multicast information
statistics	Show statistics
__readonly__	(Optional)
remote_nlri_msgs_rx	(Optional)
remote_nlri_msgs_rx_fail	(Optional)
local_nlri_msgs_tx	(Optional)
local_nlri_msgs_tx_fail	(Optional)
import_rt_msgs_tx	(Optional)
import_rt_msgs_tx_fail	(Optional)
m2rib_msgs_tx	(Optional)
m2rib_msgs_tx_fail	(Optional)
mrib_msgs_tx	(Optional)
mrib_msgs_tx_fail	(Optional)
m6rib_msgs_tx	(Optional)
m6rib_msgs_tx_fail	(Optional)
pim_msgs_tx	(Optional)
pim_msgs_tx_fail	(Optional)
pim_msgs_rx	(Optional)
pim_all_remote_ssm_rp_req_rx	(Optional)
pim6_msgs_tx	(Optional)
pim6_msgs_tx_fail	(Optional)
pim6_msgs_rx	(Optional)
pim6_all_remote_ssm_rp_req_rx	(Optional)
remote_nlri_ack_tx	(Optional)
remote_nlri_ack_tx_fail	(Optional)
all_local_nlri_req_rx	(Optional)
local_nlri_ack_rx	(Optional)
remote_route_req_tx	(Optional)
remote_route_req_tx_fail	(Optional)
pim6_all_local_ssm_rp_req_tx	(Optional)
pim6_all_local_ssm_rp_req_tx_fail	(Optional)
igmp_local_route_rx	(Optional)
igmp_local_route_ack_rx	(Optional)
igmp_msgs_tx	(Optional)
igmp_msgs_tx_fail	(Optional)
igmp_l2_vni_up_down_rx	(Optional)
mts_q_high_warning_rx	(Optional)
mts_q_full_warning_rx	(Optional)

Command Mode

/exec

show fabric multicast vrf

show fabric multicast vrf [ { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_vrf <context_name> [ <context_id> ] [ <vprime_iod> ] [ <vnid> ] [ <l3trm> ] [ <iropt> ] ]

Syntax Description


show	Show running system information
fabric	Fabric
multicast	Multicast information
vrf	Display per-VRF information
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
all	(Optional) Display all VRFs NGMVPN is aware of
__readonly__	(Optional)
TABLE_vrf	(Optional)
context_name	(Optional)
context_id	(Optional)
vprime_iod	(Optional)
vnid	(Optional)
l3trm	(Optional)
iropt	(Optional)

Command Mode

/exec

show fabric switch information

show fabric switch information [ vsan <i0> ]

Syntax Description


show	Show running system information
fabric	Show Fabric Information
switch	Show switch details.
information	Show switch model, version and other details
vsan	(Optional) VSAN id
i0	(Optional) VSAN range

Command Mode

/exec

show fc2 bind

show fc2 bind [ __readonly__ { TABLE_fc2bind <SOCKET> <FLAGS> <NLEVEL> <RULE> <SINDEX> <VSAN> <D_ID> <MASK> <TYPE> <SUBTYPE> <M_VALUES> } ]

Syntax Description


show	Show running system information
fc2	show fc2 tables and statistics
bind	show fc2 socket bindings
__readonly__	(Optional) Read only
TABLE_fc2bind	(Optional) show fc2 bind
SOCKET	(Optional) socket
FLAGS	(Optional) flags
NLEVEL	(Optional) nlevel
RULE	(Optional) rule
SINDEX	(Optional) sidnex
VSAN	(Optional) vsan
D_ID	(Optional) d_id
MASK	(Optional) mask
TYPE	(Optional) type
SUBTYPE	(Optional) subtype
M_VALUES	(Optional) m_values

Command Mode

/exec

show fc2 classf

show fc2 classf [ __readonly__ { TABLE_fc2classf <HIX> <VSAN> <S_ID> <D_ID> <IFIDX> <R_A_TOV> <E_D_TOV> <F-SO> <RC> <RS> <CS> <EE> <2-SO> <RS> <3-SO> <RS> <EECNT> <TCCNT> <FCNT> <REFCNT> } ]

Syntax Description


show	Show running system information
fc2	show fc2 tables and statistics
classf	show fc2 classf sessions
__readonly__	(Optional) Read only
TABLE_fc2classf	(Optional) show fc2 classf
HIX	(Optional) hix
VSAN	(Optional) vsan
S_ID	(Optional) sid
D_ID	(Optional) did
IFIDX	(Optional) ifidx
R_A_TOV	(Optional) r_a_tov
E_D_TOV	(Optional) e_d_tov
F-SO	(Optional) f-so
RC	(Optional) rc
RS	(Optional) rs
CS	(Optional) cs
EE	(Optional) ee
2-SO	(Optional) 2-so
RS	(Optional) rs
3-SO	(Optional) 3-so
RS	(Optional) rs
EECNT	(Optional) eecnt
TCCNT	(Optional) tccnt
FCNT	(Optional) fcnt
REFCNT	(Optional) refcnt

Command Mode

/exec

show fc2 exchange

show fc2 exchange [ __readonly__ { TABLE_ExchngInfo [ <ECB_INUSE> ] [ <ECB_DROPPED> ] [ <ECB_TOTAL> ] [ <ECB_MAX> ] } [ TABLE_fc2exchange <HIX> <VSAN> <X_ID> <OX_ID> <RX_ID> <O_ID> <R_ID> <ESTAT> <STATE> <SOCKET> <DIFINDEX> <CS> <TYPE> <SEQID> <TCNT> <RCNT> <LO> <HI> <SSTAT> <LOGIN> ] ]

Syntax Description


show	Show running system information
fc2	show fc2 tables and statistics
exchange	show fc2 active exchanges
__readonly__	(Optional) Read only
TABLE_ExchngInfo	(Optional) ecb info
ECB_INUSE	(Optional) ecb in use
ECB_DROPPED	(Optional) ecb dropped
ECB_TOTAL	(Optional) ecb total
ECB_MAX	(Optional) ecb threshold
TABLE_fc2exchange	(Optional) show fc2 exchange
HIX	(Optional) hix
VSAN	(Optional) vsan
X_ID	(Optional) xid
OX_ID	(Optional) oxid
RX_ID	(Optional) rxid
O_ID	(Optional) o_id
R_ID	(Optional) r_id
ESTAT	(Optional) estat
STATE	(Optional) state
SOCKET	(Optional) socket
DIFINDEX	(Optional) dIFINDEX
CS	(Optional) cs
TYPE	(Optional) type
SEQID	(Optional) seqid
TCNT	(Optional) tcnt
RCNT	(Optional) rcnt
LO	(Optional) lo
HI	(Optional) hi
SSTAT	(Optional) sstat
LOGIN	(Optional) login

Command Mode

/exec

show fc2 exchresp

show fc2 exchresp [ __readonly__ { TABLE_fc2exchresp <HIX> <VSAN> <OX_ID> <S_ID> <CS> <SIFINDEX> <OX_ID2> <RX_ID2> <O_ID> <R_ID> <ESTAT> <STATE> <SOCKET> <TYPE> <SEQID> <TCNT> <RCNT> <LO> <HI> <SSTAT> } ]

Syntax Description


show	Show running system information
fc2	show fc2 tables and statistics
exchresp	show fc2 active responder exchanges
__readonly__	(Optional) Read only
TABLE_fc2exchresp	(Optional) show fc2 exchresp
HIX	(Optional) hix
VSAN	(Optional) vsan
OX_ID	(Optional) oxid
S_ID	(Optional) sid
CS	(Optional) cs
SIFINDEX	(Optional) sifindex
OX_ID2	(Optional) oxid
RX_ID2	(Optional) rxid
O_ID	(Optional) oid
R_ID	(Optional) rid
ESTAT	(Optional) estat
STATE	(Optional) state
SOCKET	(Optional) socket
TYPE	(Optional) type
SEQID	(Optional) seqid
TCNT	(Optional) tcnt
RCNT	(Optional) rcnt
LO	(Optional) lo
HI	(Optional) hi
SSTAT	(Optional) sstat

Command Mode

/exec

show fc2 flogi

show fc2 flogi [ __readonly__ { TABLE_fc2flogi <HIX> <VSAN> <S_ID> <FLOGI> <IFINDEX> <TYPE> } ]

Syntax Description


show	Show running system information
fc2	show fc2 tables and statistics
flogi	show fc2 flogi table
__readonly__	(Optional) Read only
TABLE_fc2flogi	(Optional) show fc2 flogi
HIX	(Optional) hix
VSAN	(Optional) vsan
S_ID	(Optional) sid
FLOGI	(Optional) flogi
IFINDEX	(Optional) ifindex
TYPE	(Optional) type

Command Mode

/exec

show fc2 nport

show fc2 nport [ __readonly__ { TABLE_fc2nport <REF> <VSAN> <D_ID> <MASK> <FL> <ST> <IFINDEX> <CF> <TC> <2-SO> <IC> <RC> <RS> <CS> <EE> <3-SO> <3-SO-IC> <3-SO-RC> <3-SO-RS> <3-SO-CS> <3-SO-EE> } ]

Syntax Description


show	Show running system information
fc2	show fc2 tables and statistics
nport	show fc2 local nports
__readonly__	(Optional) Read only
TABLE_fc2nport	(Optional) show fc2 nport
REF	(Optional) ref
VSAN	(Optional) vsan
D_ID	(Optional) did
MASK	(Optional) mask
FL	(Optional) fl
ST	(Optional) st
IFINDEX	(Optional) ifindex
CF	(Optional) cf
TC	(Optional) tc
2-SO	(Optional) 2so
IC	(Optional) ic
RC	(Optional) rc
RS	(Optional) rs
CS	(Optional) cs
EE	(Optional) ee
3-SO	(Optional) 3so
3-SO-IC	(Optional) 3so-ic
3-SO-RC	(Optional) 3so-rc
3-SO-RS	(Optional) 3so-rs
3-SO-CS	(Optional) 3so-cs
3-SO-EE	(Optional) 3so-ee

Command Mode

/exec

show fc2 plogi

show fc2 plogi [ __readonly__ { TABLE_fc2plogi <HIX> <ADDRESS> <VSAN> <S_ID> <D_ID> <IF_INDEX> <FL> <STATE> <CF> <TC> <2-SO> <IC> <RC> <RS> <CS> <EE> <3-SO> <3SO_IC> <3SO_RC> <3SO_RS> <3SO_CS> <3SO_EE> <EECNT> <TCCNT> <2CNT> <3CNT> <REFCNT> } ]

Syntax Description


show	Show running system information
fc2	show fc2 tables and statistics
plogi	show fc2 plogi sessions
__readonly__	(Optional) Read only
TABLE_fc2plogi	(Optional) show fc2 plogi
HIX	(Optional) hix
ADDRESS	(Optional) address
VSAN	(Optional) vsan
S_ID	(Optional) sid
D_ID	(Optional) did
IF_INDEX	(Optional) ifindex
FL	(Optional) fl
STATE	(Optional) state
CF	(Optional) cf
TC	(Optional) tc
2-SO	(Optional) 2so
IC	(Optional) ic
RC	(Optional) rc
RS	(Optional) rs
CS	(Optional) cs
EE	(Optional) ee
3-SO	(Optional) 3so
3SO_IC	(Optional) ic
3SO_RC	(Optional) rc
3SO_RS	(Optional) rs
3SO_CS	(Optional) cs
3SO_EE	(Optional) ee
EECNT	(Optional) eecnt
TCCNT	(Optional) TCCNT
2CNT	(Optional) 2cnt
3CNT	(Optional) 3cnt
REFCNT	(Optional) refcnt

Command Mode

/exec

show fc2 plogi_pwwn

show fc2 plogi_pwwn [ __readonly__ { TABLE_fc2plogi_pwwn <HIX> <ADDRESS> <VSAN> <S_ID> <D_ID> <IFINDEX> <FL> <STATE> <PWWN> } ]

Syntax Description


show	Show running system information
fc2	show fc2 tables and statistics
plogi_pwwn	show fc2 plogi pwwn entries
__readonly__	(Optional) Read only
TABLE_fc2plogi_pwwn	(Optional) show fc2 plogi_pwwn
HIX	(Optional) hix
ADDRESS	(Optional) address
VSAN	(Optional) vsan
S_ID	(Optional) s_id
D_ID	(Optional) d_id
IFINDEX	(Optional) ifindex
FL	(Optional) fl
STATE	(Optional) state
PWWN	(Optional) pwwn

Command Mode

/exec

show fc2 port brief

show fc2 port brief [ __readonly__ { TABLE_fc2portbrief <BAD_FRAME_RX> } [ TABLE_FCSTAT <IX> <ST> <MOD> <EMUL> <TXPKTS> <TXDROP> <TXERR> <RXPKTS> <RXDROP> ] [ TABLE_LBSTAT <IX> <ST> <MOD> <EMUL> <TXLBPKTS> <TXLBDROP> <RXLBPKTS> <RXLBDROP> ] [ TABLE_VFCSTAT <IX> <ST> <MOD> <EMUL> <TXPKTS> <TXDROP> <TXERR> <RXPKTS> <RXDROP> ] [ TABLE_VFCPOSTAT <IX> <ST> <MOD> <EMUL> <TXPKTS> <TXDROP> <TXERR> <RXPKTS> <RXDROP> ] [ TABLE_VFCSLOTSTAT <IX> <ST> <MOD> <EMUL> <TXPKTS> <TXDROP> <TXERR> <RXPKTS> <RXDROP> ] ]

Syntax Description


show	Show running system information
fc2	show fc2 tables and statistics
port	show fc2 physical port table
brief	display only active port counters
__readonly__	(Optional) Read only
TABLE_fc2portbrief	(Optional) bad frames received
BAD_FRAME_RX	(Optional) fc2 bad frames rx
TABLE_FCSTAT	(Optional) FC Stat table
IX	(Optional) index
ST	(Optional) status
MOD	(Optional) mode
EMUL	(Optional) TEemul
TXPKTS	(Optional) txpackets
TXDROP	(Optional) txdrops
TXERR	(Optional) txerrorcnt
RXPKTS	(Optional) rx packets
RXDROP	(Optional) rx drop
TABLE_LBSTAT	(Optional) LB Stat table
IX	(Optional) index
ST	(Optional) status
MOD	(Optional) mode
EMUL	(Optional) TEemul
TXLBPKTS	(Optional) tx lb packets
TXLBDROP	(Optional) tx lb drops
RXLBPKTS	(Optional) rx lb packets
RXLBDROP	(Optional) rx lb drop
TABLE_VFCSTAT	(Optional) VFC Stat table
IX	(Optional) index
ST	(Optional) status
MOD	(Optional) mode
EMUL	(Optional) TEemul
TXPKTS	(Optional) txpackets
TXDROP	(Optional) txdrops
TXERR	(Optional) txerrorcnt
RXPKTS	(Optional) rx packets
RXDROP	(Optional) rx drop
TABLE_VFCPOSTAT	(Optional) VFC po Stat table
IX	(Optional) index
ST	(Optional) status
MOD	(Optional) mode
EMUL	(Optional) TEemul
TXPKTS	(Optional) txpackets
TXDROP	(Optional) txdrops
TXERR	(Optional) txerrorcnt
RXPKTS	(Optional) rx packets
RXDROP	(Optional) rx drop
TABLE_VFCSLOTSTAT	(Optional) VFC slot Stat table
IX	(Optional) index
ST	(Optional) status
MOD	(Optional) mode
EMUL	(Optional) TEemul
TXPKTS	(Optional) txpackets
TXDROP	(Optional) txdrops
TXERR	(Optional) txerrorcnt
RXPKTS	(Optional) rx packets
RXDROP	(Optional) rx drop

Command Mode

/exec

show fc2 port drops

show fc2 port drops [ __readonly__ [ TABLE_FCSTAT <IX> <ST> <MOD> <EMUL> <TXPKTS> <TXDROP> <TXERR> <RXPKTS> <RXDROP> ] [ TABLE_LBSTAT <IX> <ST> <MOD> <EMUL> <TXLBPKTS> <TXLBDROP> <RXLBPKTS> <RXLBDROP> ] [ TABLE_VFCSTAT <IX> <ST> <MOD> <EMUL> <TXPKTS> <TXDROP> <TXERR> <RXPKTS> <RXDROP> ] [ TABLE_VFCPOSTAT <IX> <ST> <MOD> <EMUL> <TXPKTS> <TXDROP> <TXERR> <RXPKTS> <RXDROP> ] [ TABLE_VFCSLOTSTAT <IX> <ST> <MOD> <EMUL> <TXPKTS> <TXDROP> <TXERR> <RXPKTS> <RXDROP> ] ]

Syntax Description


show	Show running system information
fc2	show fc2 tables and statistics
port	show fc2 physical port table
drops	display active port drop counters
__readonly__	(Optional) Read only
TABLE_FCSTAT	(Optional) FC Stat table
IX	(Optional) index
ST	(Optional) status
MOD	(Optional) mode
EMUL	(Optional) TEemul
TXPKTS	(Optional) txpackets
TXDROP	(Optional) txdrops
TXERR	(Optional) txerrorcnt
RXPKTS	(Optional) rx packets
RXDROP	(Optional) rx drop
TABLE_LBSTAT	(Optional) LB Stat table
IX	(Optional) index
ST	(Optional) status
MOD	(Optional) mode
EMUL	(Optional) TEemul
TXLBPKTS	(Optional) tx lb packets
TXLBDROP	(Optional) tx lb drops
RXLBPKTS	(Optional) rx lb packets
RXLBDROP	(Optional) rx lb drop
TABLE_VFCSTAT	(Optional) VFC Stat table
IX	(Optional) index
ST	(Optional) status
MOD	(Optional) mode
EMUL	(Optional) TEemul
TXPKTS	(Optional) txpackets
TXDROP	(Optional) txdrops
TXERR	(Optional) txerrorcnt
RXPKTS	(Optional) rx packets
RXDROP	(Optional) rx drop
TABLE_VFCPOSTAT	(Optional) VFC po Stat table
IX	(Optional) index
ST	(Optional) status
MOD	(Optional) mode
EMUL	(Optional) TEemul
TXPKTS	(Optional) txpackets
TXDROP	(Optional) txdrops
TXERR	(Optional) txerrorcnt
RXPKTS	(Optional) rx packets
RXDROP	(Optional) rx drop
TABLE_VFCSLOTSTAT	(Optional) VFC slot Stat table
IX	(Optional) index
ST	(Optional) status
MOD	(Optional) mode
EMUL	(Optional) TEemul
TXPKTS	(Optional) txpackets
TXDROP	(Optional) txdrops
TXERR	(Optional) txerrorcnt
RXPKTS	(Optional) rx packets
RXDROP	(Optional) rx drop

Command Mode

/exec

show fc2 port state

show fc2 port state [ __readonly__ [ TABLE_FCPORTSTATE [ <PORT_STRING> ] [ <PORT_NO> ] [ <UP_DOWN_CNTR> ] [ [ <UP_STRING> ] + [ <UP_TIME> ] + [ <UP_REFTIME> ] + [ <DOWN_STRING> ] + [ <DOWN_TIME> ] + [ <DOWN_REFTIME> ] + ] + ] [ TABLE_VFCPORTSTATE [ <PORT_STRING> ] [ <PORT_NO> ] [ <UP_DOWN_CNTR> ] [ [ <UP_STRING> ] + [ <UP_TIME> ] + [ <UP_REFTIME> ] + [ <DOWN_STRING> ] + [ <DOWN_TIME> ] + [ <DOWN_REFTIME> ] + ] + ] [ TABLE_VFCPOPORTSTATE [ <PORT_STRING> ] [ <PORT_NO> ] [ <UP_DOWN_CNTR> ] [ [ <UP_STRING> ] + [ <UP_TIME> ] + [ <UP_REFTIME> ] + [ <DOWN_STRING> ] + [ <DOWN_TIME> ] + [ <DOWN_REFTIME> ] + ] + ] [ TABLE_VFCPORTSLOTSTATE [ <PORT_STRING> ] [ <PORT_NO> ] [ <UP_DOWN_CNTR> ] [ [ <UP_STRING> ] + [ <UP_TIME> ] + [ <UP_REFTIME> ] + [ <DOWN_STRING> ] + [ <DOWN_TIME> ] + [ <DOWN_REFTIME> ] + ] + ] ]

Syntax Description


show	Show running system information
fc2	show fc2 tables and statistics
port	show fc2 physical port table
state	display port state history
__readonly__	(Optional) Read only
TABLE_FCPORTSTATE	(Optional) fc port state change history
PORT_STRING	(Optional) port name
PORT_NO	(Optional) port number
UP_DOWN_CNTR	(Optional) up-down counter
UP_STRING	(Optional) up
UP_TIME	(Optional) up time
UP_REFTIME	(Optional) up from
DOWN_STRING	(Optional) down string
DOWN_TIME	(Optional) down time
DOWN_REFTIME	(Optional) down from
TABLE_VFCPORTSTATE	(Optional) vfc port state change history
PORT_STRING	(Optional) port name
PORT_NO	(Optional) port number
UP_DOWN_CNTR	(Optional) up-down counter
UP_STRING	(Optional) up
UP_TIME	(Optional) up time
UP_REFTIME	(Optional) up from
DOWN_STRING	(Optional) down string
DOWN_TIME	(Optional) down time
DOWN_REFTIME	(Optional) down from
TABLE_VFCPOPORTSTATE	(Optional) vfc po port state change history
PORT_STRING	(Optional) port name
PORT_NO	(Optional) port number
UP_DOWN_CNTR	(Optional) up-down counter
UP_STRING	(Optional) up
UP_TIME	(Optional) up time
UP_REFTIME	(Optional) up from
DOWN_STRING	(Optional) down string
DOWN_TIME	(Optional) down time
DOWN_REFTIME	(Optional) down from
TABLE_VFCPORTSLOTSTATE	(Optional) vfc port slot state change history
PORT_STRING	(Optional) port name
PORT_NO	(Optional) port number
UP_DOWN_CNTR	(Optional) up-down counter
UP_STRING	(Optional) up
UP_TIME	(Optional) up time
UP_REFTIME	(Optional) up from
DOWN_STRING	(Optional) down string
DOWN_TIME	(Optional) down time
DOWN_REFTIME	(Optional) down from

Command Mode

/exec

show fc2 socket

show fc2 socket [ __readonly__ { TABLE_fc2socket <SOCKET> <REFCNT> <PROTOCOL> <FLAGS> <PID> <RCVBUF> <RMEM_USED> <QLEN> <NOTSK> } ]

Syntax Description


show	Show running system information
fc2	show fc2 tables and statistics
socket	show fc2 active sockets
__readonly__	(Optional) Read only
TABLE_fc2socket	(Optional) show fc2 socket
SOCKET	(Optional) socket
REFCNT	(Optional) refcnt
PROTOCOL	(Optional) protocol
FLAGS	(Optional) flags
PID	(Optional) pid
RCVBUF	(Optional) rcvbuf
RMEM_USED	(Optional) rmem_used
QLEN	(Optional) qlen
NOTSK	(Optional) not_sk

Command Mode

/exec

show fc2 sockexch

show fc2 sockexch [ __readonly__ { TABLE_fc2sockexch <SOCKET> <VSAN> <X_ID> <OX_ID> <RX_ID> <O_ID> <R_ID> <ESTAT> <STATE> <CS> <TYPE> <SK> } ]

Syntax Description


show	Show running system information
fc2	show fc2 tables and statistics
sockexch	show fc2 active exchanges for each socket
__readonly__	(Optional) Read only
TABLE_fc2sockexch	(Optional) show fc2 sockexch
SOCKET	(Optional) socket
VSAN	(Optional) vsan
X_ID	(Optional) x_id
OX_ID	(Optional) oxid
RX_ID	(Optional) rxid
O_ID	(Optional) o_id
R_ID	(Optional) r_id
ESTAT	(Optional) estat
STATE	(Optional) state
CS	(Optional) cs
TYPE	(Optional) type
SK	(Optional) sk

Command Mode

/exec

show fc2 socknotify

show fc2 socknotify [ __readonly__ { TABLE_fc2socknotify <SOCKET> <ADDRESS> <REF> <VSAN> <D_ID> <MASK> <FL> <ST> <IFINDEX> } ]

Syntax Description


show	Show running system information
fc2	show fc2 tables and statistics
socknotify	show fc2 local nport plogi/logo notifications per each socket
__readonly__	(Optional) Read only
TABLE_fc2socknotify	(Optional) show fc2 socknotify
SOCKET	(Optional) socket
ADDRESS	(Optional) address
REF	(Optional) ref
VSAN	(Optional) vsan
D_ID	(Optional) d_id
MASK	(Optional) mask
FL	(Optional) fl
ST	(Optional) st
IFINDEX	(Optional) ifindex

Command Mode

/exec

show fc2 socknport

show fc2 socknport [ __readonly__ { TABLE_fc2socknport <SOCKET> <ADDRESS> <REF> <VSAN> <D_ID> <MASK> <FL> <ST> <IFINDEX> } ]

Syntax Description


show	Show running system information
fc2	show fc2 tables and statistics
socknport	show fc2 local nports per each socket
__readonly__	(Optional) Read only
TABLE_fc2socknport	(Optional) show fc2 socknport
SOCKET	(Optional) socket
ADDRESS	(Optional) address
REF	(Optional) ref
VSAN	(Optional) vsan
D_ID	(Optional) d_id
MASK	(Optional) mask
FL	(Optional) fl
ST	(Optional) st
IFINDEX	(Optional) ifindex

Command Mode

/exec

show fc2 vsan

show fc2 vsan [ __readonly__ { TABLE_fc2vsan <VSAN> <X_ID> <E_D_TOV> <R_A_TOV> <WWN> <IOP_MODE> } ]

Syntax Description


show	Show running system information
fc2	show fc2 tables and statistics
vsan	show fc2 vsan table
__readonly__	(Optional) Read only
TABLE_fc2vsan	(Optional) show fc2 vsan
VSAN	(Optional) vsan
X_ID	(Optional) xid
E_D_TOV	(Optional) e_d_tov
R_A_TOV	(Optional) r_a_tov
WWN	(Optional) wwn
IOP_MODE	(Optional) iop_mode

Command Mode

/exec

show fcalias

show fcalias [ [ name <s0> ] [ [ pending ] [ vsan <i0> ] ] ]

Syntax Description


show	Show running system information
fcalias	Fcalias show commands
name	(Optional) Show members of a specified fcalias
s0	(Optional) Enter the name of fcalias
pending	(Optional) Show members of a specified fcalias in session
vsan	(Optional) Show aliases belonging to the specified VSAN
i0	(Optional) VSAN id range

Command Mode

/exec

show fcdomain

Syntax Description


show	Show running system information
fcdomain	Show fcdomain information

Command Mode

/exec

show fcdomain address-allocation

show fcdomain address-allocation [ { cache | vsan <i0> } ]

Syntax Description


show	Show running system information
fcdomain	Show fcdomain information
address-allocation	Show statistics for the fcid allocation
cache	(Optional) Show cache content for the fcid allocation
vsan	(Optional) Specify the vsan id
i0	(Optional) VSAN id

Command Mode

/exec

show fcdomain allowed

show fcdomain allowed [ vsan <i0> ]

Syntax Description


show	Show running system information
fcdomain	Show fcdomain information
allowed	Show list of allowed domain IDs
vsan	(Optional) Specify the vsan id
i0	(Optional) VSAN id

Command Mode

/exec

show fcdomain domain-list

show fcdomain domain-list [ vsan <i0> ]

Syntax Description


show	Show running system information
fcdomain	Show fcdomain information
domain-list	Show list of domain IDs granted by the principal sw
vsan	(Optional) Specify the vsan id
i0	(Optional) VSAN id

Command Mode

/exec

show fcdomain fcid persistent

show fcdomain fcid persistent [ { unused [ vsan <i0> ] | vsan1 <i1> } ]

Syntax Description


show	Show running system information
fcdomain	Show fcdomain information
fcid	Show persistent FCIDs (across reboot)
persistent	Show persistent FCIDs (across reboot)
unused	(Optional) Show unused persistent FCIDs (across reboot)
vsan	(Optional) Specify the vsan id
i0	(Optional) VSAN id
vsan1	(Optional) Specify the vsan id
i1	(Optional) VSAN id

Command Mode

/exec

show fcdomain pending-diff

show fcdomain pending-diff [ vsan <i0> ]

Syntax Description


show	Show running system information
fcdomain	Show fcdomain information
pending-diff	Show the difference between running and pending configuration
vsan	(Optional) Specify the vsan id
i0	(Optional) VSAN id

Command Mode

/exec

show fcdomain pending

show fcdomain pending [ vsan <i0> ]

Syntax Description


show	Show running system information
fcdomain	Show fcdomain information
pending	Show the pending configuration
vsan	(Optional) Specify the vsan id
i0	(Optional) VSAN id

Command Mode

/exec

show fcdomain session-status

show fcdomain session-status [ vsan <i0> ]

Syntax Description


show	Show running system information
fcdomain	Show fcdomain information
session-status	Show the last action performed by fcdomain
vsan	(Optional) Specify the vsan id
i0	(Optional) VSAN id

Command Mode

/exec

show fcdomain statistics

show fcdomain statistics [ { interface <if0> [ vsan <i0> ] | vsan1 <i1> } ]

Syntax Description


show	Show running system information
fcdomain	Show fcdomain information
statistics	Show the statistics of fcdomain
interface	(Optional) Specify the fibre channel interface
if0	(Optional)
vsan	(Optional) Specify the vsan id
i0	(Optional) VSAN id
vsan1	(Optional) Specify the vsan id
i1	(Optional) VSAN id

Command Mode

/exec

show fcdomain status

Syntax Description


show	Show running system information
fcdomain	Show fcdomain information
status	Show all vsan-independent information in fcdomain

Command Mode

/exec

show fcdomain vsan

show fcdomain vsan <i0>

Syntax Description


show	Show running system information
fcdomain	Show fcdomain information
vsan	Specify the vsan id
i0	VSAN id

Command Mode

/exec

show fcdroplatency

show fcdroplatency [ { network | switch } ] [ __readonly__ [ <switch_latency> ] [ <global_network_latency> ] [ TABLE_vsan_network_latency { <vsan-no> <network-latency> } ] ]

Syntax Description


show	Show running system information
fcdroplatency	show switch or network latency
network	(Optional) network latency in milliseconds
switch	(Optional) switch latency in milliseconds
__readonly__	(Optional)
switch_latency	(Optional) Switch latency value
global_network_latency	(Optional) global network latency value
TABLE_vsan_network_latency	(Optional) VSAN specific network latency settings
vsan-no	(Optional) vsan number
network-latency	(Optional) VSAN specific network latency

Command Mode

/exec

show fcid-allocation area

Syntax Description


show	Show running system information
fcid-allocation	Show information about fcid-allocation list
area	Show information about fcid-allocation list

Command Mode

/exec

show fcid-allocation company-id-from-wwn

show fcid-allocation company-id-from-wwn <wwn0>

Syntax Description


show	Show running system information
fcid-allocation	Show information about fcid-allocation list
company-id-from-wwn	Company id (or OUI).
wwn0	Enter WWN to extract company_id/oui

Command Mode

/exec

show fcns database

show fcns database [ { detail [ vsan <i0> ] | domain <i1> [ { detail [ vsan1 <i2> ] | vsan2 <i3> } ] | fcid <fcid4> { detail2 vsan3 <i5> | vsan4 <i6> } | local [ { detail1 [ vsan5 <i7> ] | vsan6 <i8> } ] | npv [ { detail1 [ vsan7 <i9> ] | node_wwn <wwn10> [ vsan8 <i11> ] | vsan9 <i12> } ] | proxy-host { detail4 vsan10 <i13> | vsan11 <i14> } | vsan12 <i15> } ]

Syntax Description


show	Show running system information
fcns	show name server tables
database	show name server database
detail	(Optional) show all objects in each entry
vsan	(Optional) show local entries for the given vsan(s)
i0	(Optional) VSAN id range
domain	(Optional) show entries in a domain
i1	(Optional) domain-id
detail	(Optional) show all objects in each entry
vsan1	(Optional) show entries for a domain for the given vsan(s)
i2	(Optional) VSAN id range
vsan2	(Optional) show entries for a domain for the given vsan(s)
i3	(Optional) VSAN id range
fcid	(Optional) show entry for the given port
fcid4	(Optional) enter FCID
detail2	(Optional) show all objects in the entry
vsan3	(Optional) show port entry for the given vsan
i5	(Optional) VSAN id
vsan4	(Optional) show port entry for the given vsan
i6	(Optional) VSAN id
local	(Optional) show local entries
detail1	(Optional) show all objects in each entry
vsan5	(Optional) show local entries for the given vsan(s)
i7	(Optional) VSAN id range
vsan6	(Optional) show local entries for the given vsan(s)
i8	(Optional) VSAN id range
npv	(Optional) show n-port virtualization (npv) entries
detail1	(Optional) show all objects in each entry
vsan7	(Optional) show npv entries for the given vsan(s)
i9	(Optional) VSAN id range
node_wwn	(Optional) show end-devices logged in via an npv node
wwn10	(Optional) Node WWN of NPV
vsan8	(Optional) show npv entries for the given vsan(s)
i11	(Optional) VSAN id range
vsan9	(Optional) show npv entries for the given vsan(s)
i12	(Optional) VSAN id range
proxy-host	(Optional) show entry for the proxy-host
detail4	(Optional) show all objects in the entry
vsan10	(Optional) show port entry for the given vsan
i13	(Optional) VSAN id
vsan11	(Optional) show port entry for the given vsan
i14	(Optional) VSAN id
vsan12	(Optional) show entries for the given vsan(s)
i15	(Optional) VSAN id range

Command Mode

/exec

show fcns statistics

show fcns statistics [ { detail [ vsan <i0> ] | vsan1 <i1> } ]

Syntax Description


show	Show running system information
fcns	show name server tables
statistics	show name server statistics
detail	(Optional) show detailed statistics
vsan	(Optional) show detailed statistics for the vsan(s)
i0	(Optional) VSAN id range
vsan1	(Optional) show statistics for the vsan(s)
i1	(Optional) VSAN id range

Command Mode

/exec

show fcoe-npv issu-impact

show fcoe-npv issu-impact [ __readonly__ { <is_impact> } [ TABLE_interface <vfc_intf> <fc_id> ] ]

Syntax Description


show	Show running system informationrunning system information
fcoe-npv	feature fcoe-npv
issu-impact	Show feature fcoe-npv config issues if attempting to do non-disruptive ISSU
__readonly__	(Optional) Read Only
is_impact	(Optional) show issu impact
TABLE_interface	(Optional) show fcoe database
vfc_intf	(Optional) vfc port Interface index
fc_id	(Optional) vfc port FCID

Command Mode

/exec

show fcoe

show fcoe [ __readonly__ { TABLE_fcf <fcf_if_index> <fcf_mac> <fc_map> <fcf_priority> <fka_Advertisement> } [ TABLE_vfc <vfc_name> <vfcf_mac> ] ]

Syntax Description


show	Show running system information
fcoe	Show FCOE paramaters
__readonly__	(Optional) Read Only
TABLE_fcf	(Optional) fcf table
fcf_if_index	(Optional) fcf if index
fcf_mac	(Optional) fcf mac
fc_map	(Optional) fc map
fcf_priority	(Optional) fcf priority
fka_Advertisement	(Optional) fka Advertisement
TABLE_vfc	(Optional) vfc details table for sup
vfc_name	(Optional) vfc name
vfcf_mac	(Optional) vfcf mac

Command Mode

/exec

show fcoe database

show fcoe database [ __readonly__ { TABLE_interface <interface> [ <fcid> ] [ <port_name> ] <mac_address> } <flogi_count> [ TABLE_veport <interface> <mac_address> <vsan> ] ]

Syntax Description


show	Show running system information
fcoe	Show FCOE paramaters
database	Show FCOE database
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show fcoe database
fcid	(Optional) fcid
port_name	(Optional) port name
mac_address	(Optional) mac address
interface	(Optional) ve port Interface index
TABLE_veport	(Optional) ve port details
mac_address	(Optional) ve port mac address
flogi_count	(Optional) flogi_count
vsan	(Optional) ve port VSAN trunking

Command Mode

/exec

show fcs database

show fcs database [ vsan <i0> ]

Syntax Description


show	Show running system information
database	Show local database of FCS
vsan	(Optional) Show local database for a VSAN
i0	(Optional) VSAN range

Command Mode

/exec

show fcs ie

show fcs ie [ { nwwn <wwn0> vsan <i1> | vsan1 <i2> } ]

Syntax Description


show	Show running system information
ie	Show Interconnect Element Objects Information
nwwn	(Optional) IE WWN
wwn0	(Optional) IE WWN
vsan	(Optional) VSAN id of IE
i1	(Optional) VSAN id
vsan1	(Optional) VSAN id of IE
i2	(Optional) VSAN range

Command Mode

/exec

show fcs platform

show fcs platform { name <s0> vsan <i0> | vsan1 <i1> }

Syntax Description


show	Show running system information
platform	Show Platform Objects Information
name	Platform Name
s0	Platform name string
vsan	VSAN id of the platform
i0	VSAN id
vsan1	VSAN id of the platform
i1	VSAN range

Command Mode

/exec

show fcs port

show fcs port { pwwn <wwn0> vsan <i1> | vsan1 <i2> }

Syntax Description


show	Show running system information
port	Show Port Objects Information
pwwn	Port WWN
wwn0	Port WWN
vsan	VSAN id of the port
i1	VSAN id
vsan1	VSAN id of the port
i2	VSAN range

Command Mode

/exec

show fcs statistics

show fcs statistics [ vsan <i0> ]

Syntax Description


show	Show running system information
statistics	Show statistics for FCS packets.
vsan	(Optional) Show statistics for a VSAN
i0	(Optional) VSAN range

Command Mode

/exec

show fcs vsan

Syntax Description


show	Show running system information
vsan	Show list of all the VSANs and plat-check-mode for each

Command Mode

/exec

show fctimer

show fctimer [ __readonly__ { <F_S_TOV> <D_S_TOV> <E_D_TOV> <R_A_TOV> } ]

Syntax Description


show	show running system information
fctimer	show Fibre Channel timers
__readonly__	(Optional) Read only
F_S_TOV	(Optional) F_S_TOV
D_S_TOV	(Optional) D_S_TOV
E_D_TOV	(Optional) E_D_TOV
R_A_TOV	(Optional) R_A_TOV

Command Mode

/exec

show fctimer D_S_TOV

show fctimer D_S_TOV [ vsan <i0> ] [ __readonly__ [ TABLE_D_S_TOV [ <vsan-no> ] <D_S_TOV> ] [ <non-exist-vsan> ] ]

Syntax Description


show	Show running system information
fctimer	show Fibre Channel timers
D_S_TOV	D_S_TOV in milliseconds
vsan	(Optional) Specify VSAN id
i0	(Optional) VSAN id range
__readonly__	(Optional)
TABLE_D_S_TOV	(Optional) table D_S_TOV
vsan-no	(Optional) vsan number
D_S_TOV	(Optional) D_S_TOV
non-exist-vsan	(Optional) non configured vsans

Command Mode

/exec

show fctimer E_D_TOV

show fctimer E_D_TOV [ vsan <i0> ] [ __readonly__ [ TABLE_E_D_TOV [ <vsan-no> ] <E_D_TOV> ] [ <non-exist-vsan> ] ]

Syntax Description


show	Show running system information
fctimer	show Fibre Channel timers
E_D_TOV	E_D_TOV in milliseconds
vsan	(Optional) Specify VSAN id
i0	(Optional) VSAN id range
__readonly__	(Optional)
TABLE_E_D_TOV	(Optional) table
vsan-no	(Optional) vsan number
E_D_TOV	(Optional) E_D_TOV
non-exist-vsan	(Optional) not exist vsans

Command Mode

/exec

show fctimer F_S_TOV

show fctimer F_S_TOV [ vsan <i0> ] [ __readonly__ [ TABLE_F_S_TOV [ <vsan-no> ] <F_S_TOV> ] [ <non-exist-vsan> ] ]

Syntax Description


show	Show running system information
fctimer	show Fibre Channel timers
F_S_TOV	F_S_TOV in milliseconds
vsan	(Optional) Specify VSAN id
i0	(Optional) VSAN id range
__readonly__	(Optional)
TABLE_F_S_TOV	(Optional) table
vsan-no	(Optional) vsan number
F_S_TOV	(Optional) F_S_TOV
non-exist-vsan	(Optional) not exist vsans

Command Mode

/exec

show fctimer R_A_TOV

show fctimer R_A_TOV [ vsan <i0> ] [ __readonly__ [ TABLE_R_A_TOV [ <vsan-no> ] <R_A_TOV> ] [ <non-exist-vsan> ] ]

Syntax Description


show	Show running system information
fctimer	show Fibre Channel timers
R_A_TOV	R_A_TOV in milliseconds
vsan	(Optional) Specify VSAN id
i0	(Optional) VSAN id range
__readonly__	(Optional)
TABLE_R_A_TOV	(Optional) table
vsan-no	(Optional) vsan number
R_A_TOV	(Optional) R_A_TOV
non-exist-vsan	(Optional) non exist vsans

Command Mode

/exec

show fctimer last action status

show fctimer last action status [ __readonly__ [ <vsan> ] <last_action_timestamp> <last_action> <last_action_result> <last_action_failure_reason> ]

Syntax Description


show	Show running system information
fctimer	show Fibre Channel timers
last	Show the status of the last cfs commit/abort operation
action	Show the status of the last cfs commit/abort operation
status	Show the status of the last cfs commit/abort operation
__readonly__	(Optional) Readonly
vsan	(Optional) Vsan
last_action_timestamp	(Optional) Last action timestamp
last_action	(Optional) Last action
last_action_result	(Optional) Last action result
last_action_failure_reason	(Optional) Last action failure reason

Command Mode

/exec

show fctimer pending-diff

show fctimer pending-diff [ __readonly__ <status_fctimer> ]

Syntax Description


show	Show running system information
fctimer	show Fibre Channel timers
pending-diff	Show the difference between pending database and running config
__readonly__	(Optional)
status_fctimer	(Optional) Show the difference between pending database and running config

Command Mode

/exec

show fctimer pending

show fctimer pending [ __readonly__ <status_fctimer> ]

Syntax Description


show	Show running system information
fctimer	show Fibre Channel timers
pending	Show the status of pending fctimer commands
__readonly__	(Optional)
status_fctimer	(Optional) Show the status of pending fctimer commands

Command Mode

/exec

show fctimer session status

show fctimer session status [ __readonly__ [ <vsan> ] <last_action_timestamp> <last_action> <last_action_result> <last_action_failure_reason> ]

Syntax Description


show	Show running system information
fctimer	show Fibre Channel timers
session	Show the state of fctimer cfs session
status	Show the status of the last cfs commit/abort operation
__readonly__	(Optional) Readonly
vsan	(Optional) Vsan
last_action_timestamp	(Optional) Last action timestamp
last_action	(Optional) Last action
last_action_result	(Optional) Last action result
last_action_failure_reason	(Optional) Last action failure reason

Command Mode

/exec

show fctimer status

show fctimer status [ __readonly__ <Distribution> ]

Syntax Description


show	Show running system information
fctimer	show Fibre Channel timers
status	cfs distribution is enabled or disabled
__readonly__	(Optional) read only
Distribution	(Optional) distribution

Command Mode

/exec

show fctimer vsan

show fctimer vsan <i0> [ __readonly__ { TABLE_fctimer <vsan-no> <F_S_TOV> <D_S_TOV> <E_D_TOV> <R_A_TOV> } [ <non-exist-vsan> ] ]

Syntax Description


show	Show running system information
fctimer	show Fibre Channel timers
vsan	Specify VSAN id
i0	VSAN id range
__readonly__	(Optional) Read only
TABLE_fctimer	(Optional) table
vsan-no	(Optional) vsan number
F_S_TOV	(Optional) F_S_TOV
D_S_TOV	(Optional) D_S_TOV
E_D_TOV	(Optional) E_D_TOV
R_A_TOV	(Optional) R_A_TOV
non-exist-vsan	(Optional) non exist vsans

Command Mode

/exec

show fdmi database

Syntax Description


show	Show running system information
fdmi	Show fdmi information
database	show fdmi database

Command Mode

/exec

show fdmi database detail

Syntax Description


show	Show running system information
fdmi	Show fdmi information
database	show fdmi database
detail	show all objects in each entry

Command Mode

/exec

show fdmi database detail hba-id vsan

show fdmi database detail hba-id <wwn0> vsan <i1>

Syntax Description


show	Show running system information
fdmi	Show fdmi information
database	show fdmi database
detail	show all objects in each entry
hba-id	show entries for the given HBA id
wwn0	HBA id
vsan	show HBA id the given vsan
i1	VSAN id

Command Mode

/exec

show fdmi database detail vsan

show fdmi database detail vsan <i0>

Syntax Description


show	Show running system information
fdmi	Show fdmi information
database	show fdmi database
detail	show all objects in each entry
vsan	show entries for the given vsan(s)
i0	VSAN id range

Command Mode

/exec

show fdmi database vsan

show fdmi database vsan <i0>

Syntax Description


show	Show running system information
fdmi	Show fdmi information
database	show fdmi database
vsan	show entries for the given vsan(s)
i0	VSAN id range

Command Mode

/exec

show fdmi suppress-updates

Syntax Description


show	Show running system information
fdmi	Show fdmi information
suppress-updates	Show vsans on which updates are suppressed

Command Mode

/exec

show feature-set

show feature-set [ <name> ] [ <id> ] [ __readonly__ TABLE_cfcFeatureSetTable <cfcFeatureSetIndex> <cfcFeatureSetName> <cfcFeatureSetAction> <cfcFeatureSetLastAction> <cfcFeatureSetLastActionResult> <cfcFeatureSetLastFailureReason> <cfcFeatureSetOpStatus> <cfcFeatureSetOpStatusReason> ]

Syntax Description


show	Show running system information
feature-set	Show feature set status
name	(Optional) feature-set name
id	(Optional) feature-set id
__readonly__	(Optional)
TABLE_cfcFeatureSetTable	(Optional) feature-set table
cfcFeatureSetIndex	(Optional) feature-set table index
cfcFeatureSetName	(Optional) feature-set name
cfcFeatureSetAction	(Optional) action
cfcFeatureSetLastAction	(Optional) last action
cfcFeatureSetLastActionResult	(Optional) last action result
cfcFeatureSetLastFailureReason	(Optional) last failure reason
cfcFeatureSetOpStatus	(Optional) operation status
cfcFeatureSetOpStatusReason	(Optional) operation status

Command Mode

/exec

show feature-set services

show feature-set services <s0> [ __readonly__ [ { TABLE_services <service_name> } ] { <count> <feature_set> } ]

Syntax Description


show	Show running system information
feature-set	Show feature set status
services	Show services in feature set
__readonly__	(Optional)
TABLE_services	(Optional) all service names in feature set
service_name	(Optional) name of the service
count	(Optional) number of services in the feature set
feature_set	(Optional) feature set name
s0	Name of feature set

Command Mode

/exec

show feature

show feature [ __readonly__ [ { TABLE_cfcFeatureCtrlTable <cfcFeatureCtrlIndex2> <cfcFeatureCtrlInstanceNum2> <cfcFeatureCtrlName2> <cfcFeatureCtrlAction2> <cfcFeatureCtrlLastAction2> <cfcFeatureCtrlLastActionResult2> <cfcFeatureCtrlLastFailureReason2> <cfcFeatureCtrlOpStatus2> <cfcFeatureCtrlOpStatusReason2> <cfcFeatureCtrlTag2> } ] ]

Syntax Description


show	Show running system information
feature	Show feature status
__readonly__	(Optional)
TABLE_cfcFeatureCtrlTable	(Optional) feature table
cfcFeatureCtrlIndex2	(Optional) feature table index
cfcFeatureCtrlInstanceNum2	(Optional) instance number
cfcFeatureCtrlName2	(Optional) feature name
cfcFeatureCtrlAction2	(Optional) Action to be triggered for the feature
cfcFeatureCtrlLastAction2	(Optional) Last action triggered for the feature
cfcFeatureCtrlLastActionResult2	(Optional) The result of execution of the last action
cfcFeatureCtrlLastFailureReason2	(Optional) Failure Reason
cfcFeatureCtrlOpStatus2	(Optional) operation status
cfcFeatureCtrlOpStatusReason2	(Optional) Reason for current operation status
cfcFeatureCtrlTag2	(Optional) Name of the instance in string format in case of multinstance feature

Command Mode

/exec

show fhrp

show fhrp [ <intf> ] [ __readonly__ { TABLE_brief <intf_name> <intf_state> <ipv4_state> <ipv6_state> <hardware_status> <refcount> } ]

Syntax Description


fhrp	FHRP Show commands
show	Show running system information
intf	(Optional) Specify a single interface
__readonly__	(Optional)
TABLE_brief	(Optional) Show brief FHRP interface information
intf_name	(Optional) Interface name
intf_state	(Optional) Interface state
ipv4_state	(Optional) Interface IPv4 state
ipv6_state	(Optional) Interface IPv6 state
hardware_status	(Optional) Interface hardware status
refcount	(Optional) Interface refcount

Command Mode

/exec

show fhrp verbose

show fhrp [ <intf> ] verbose [ __readonly__ { TABLE_det <intf_name> <handle> <refcount> { TABLE_clients <client_id> <client_name> } <running> <expired> <v_retries> <v_time> <r_delay> <min_delay> <remaining_delay> <i_state> <ipv4_state> <ipv6_state> <h_state> <int_l2> } ]

Syntax Description


fhrp	FHRP Show commands
show	Show running system information
intf	(Optional) Specify a single interface
verbose	Display detailed information
__readonly__	(Optional)
TABLE_det	(Optional) Detailed FHRP interface information
intf_name	(Optional) Interface name
handle	(Optional) Interface handle
refcount	(Optional) Reference count
TABLE_clients	(Optional) FHRP clients present on interface
client_id	(Optional) FHRP client id
client_name	(Optional) FHRP client name
running	(Optional) Time verify up timer running
expired	(Optional) Verify up timer has expired
v_retries	(Optional) Verify retries
v_time	(Optional) Verify remaining time
r_delay	(Optional) Reload delay
min_delay	(Optional) Min delay
remaining_delay	(Optional) Remaining delay
i_state	(Optional) Interface state
ipv4_state	(Optional) Interface IPv4 state
ipv6_state	(Optional) Interface IPv6 state
h_state	(Optional) Interface hardware state
int_l2	(Optional) Interface is L2-only

Command Mode

/exec

show file

show file <uri0> [ cksum | md5sum | sha256sum | sha512sum ] [ __readonly__ { [ <file_content> ] + [ <file_content_cksum> ] [ <file_content_md5sum> ] [ <file_content_sha256sum> ] [ <file_content_sha512sum> ] } ]

Syntax Description


show	Show running system information
file	Displays content of files
uri0	Filename to be displayed
cksum	(Optional) Displays CRC checksum for a file
md5sum	(Optional) Displays MD5 checksum for a file
sha256sum	(Optional) Displays SHA256 checksum for a file
sha512sum	(Optional) Displays SHA512 checksum for a file
__readonly__	(Optional) Read only
file_content	(Optional) uri file content buffer string
file_content_cksum	(Optional) uri file content checksum
file_content_md5sum	(Optional) uri file content md5sum
file_content_sha256sum	(Optional) uri file content sha256sum
file_content_sha512sum	(Optional) uri file content sha512sum

Command Mode

/exec

show fips status

show fips status [ __readonly__ { operation_status <o_status> } { mode_state <m_state> } [ TABLE_sessions <lc_num> <lc_status> ] ]

Syntax Description


show	Show running system information
fips	Show if FIPS mode is enabled or disabled
status	Whether FIPS mode is enabled or disabled
__readonly__	(Optional)
operation_status	(Optional) run-time information about fips
o_status	(Optional) operational status of fips
mode_state	(Optional) mode state
m_state	(Optional) fips or non-fips state
TABLE_sessions	(Optional) all lc status
lc_num	(Optional) the lc number
lc_status	(Optional) the lc status

Command Mode

/exec

show flogi auto-area-list

Syntax Description


show	Show running system information
flogi	Show information about FLOGI
auto-area-list	Show list of ouis that are allocated area.

Command Mode

/exec

show flogi database

show flogi database [ { details | [ fcid <fcid0> ] [ details ] | [ interface <if0> ] [ details ] | [ vsan <i1> ] [ details ] } ]

Syntax Description


show	Show running system information
flogi	Show information about FLOGI
database	Show information about FLOGI sessions
details	(Optional) details: shows fcid allocation details
fcid	(Optional) fcid: enter the fcid to be matched
fcid0	(Optional) Enter fcid
details	(Optional) details: shows fcid allocation details
interface	(Optional) interface id: enter the interface id of the port
if0	(Optional) Enter interface id
details	(Optional) details: shows fcid allocation details
vsan	(Optional) vsan id:Enter the vsan number
i1	(Optional) Enter vsan
details	(Optional) details: shows fcid allocation details

Command Mode

/exec

show flow cache

show flow cache [ ipv4 | ipv6 | ce ] [ __readonly__ [ { TABLE_flow_cache <flow-cache-index> [ <flow-type> ] [ <source-ip> ] [ <destination-ip> ] [ <source-mac> ] [ <destination-mac> ] [ <bridge-domain-id> ] [ <ether-type> ] [ <source-port> ] [ <destination-port> ] [ <protocol> ] [ <ipv6-flowlabel> ] [ <byte-count> ] [ <packet-count> ] [ <tcp-flags> ] [ <tos> ] [ <if-id> ] [ <output-if-id> ] [ <flow-start> ] [ <flow-end> ] } ] ]

Syntax Description


show	Show running system information
flow	Show NetFlow information
cache	Show NetFlow Exporter Cache
ipv4	(Optional) Show ipv4 cache entries
ipv6	(Optional) Show ipv6 cache entries
ce	(Optional) Show ce cache entries
__readonly__	(Optional)
TABLE_flow_cache	(Optional) The XML flow cache table
flow-cache-index	(Optional) Flow Index
flow-type	(Optional) Flow type - v4,v6 or MAC
source-ip	(Optional) Source IP
destination-ip	(Optional) Destination IP
source-mac	(Optional) Source MAC
destination-mac	(Optional) Destination MAC
bridge-domain-id	(Optional) Bridge Domain ID
ether-type	(Optional) Ether Type
source-port	(Optional) Source Port
destination-port	(Optional) Destination Port
protocol	(Optional) Protocol
ipv6-flowlabel	(Optional) Ipv6 flowlabel
byte-count	(Optional) Byte Count
packet-count	(Optional) Packet Count
tcp-flags	(Optional) TCP Flags
tos	(Optional) TOS
if-id	(Optional) IF ID
output-if-id	(Optional) OUTPUT IF ID
flow-start	(Optional) Flow Start Time
flow-end	(Optional) Flow End Time

Command Mode

/exec

show flow cache

show flow cache [ ipv4 | ipv6 | ce ] [ __readonly__ TABLE_flow_cache <flow-type> <source-ip> <destination-ip> <bridge-domain-id> <source-port> <destination-port> <protocol> <ipv6-flowlabel> <byte-count> <packet-count> <tcp-flags> <tos> <if-id> <flow-start> <flow-end> <source-mac> <destination-mac> <ether-type> ]

Syntax Description


show	Show running system information
flow	Show NetFlow information
cache	Show NetFlow Exporter Cache
ipv4	(Optional) Show ipv4 cache entries
ipv6	(Optional) Show ipv6 cache entries
ce	(Optional) Show ce cache entries
__readonly__	(Optional)
TABLE_flow_cache	(Optional) The XML flow cache table
flow-type	(Optional) Flow type - v4,v6 or MAC
source-ip	(Optional) Source IP
destination-ip	(Optional) Destination IP
bridge-domain-id	(Optional) Bridge Domain ID
source-port	(Optional) Source Port
destination-port	(Optional) Destination Port
protocol	(Optional) Protocol
ipv6-flowlabel	(Optional) Ipv6 flowlabel
byte-count	(Optional) Byte Count
packet-count	(Optional) Packet Count
tcp-flags	(Optional) TCP Flags
tos	(Optional) TOS
if-id	(Optional) IF ID
flow-start	(Optional) Flow Start Time
flow-end	(Optional) Flow End Time
source-mac	(Optional) Source MAC
destination-mac	(Optional) Destination MAC
ether-type	(Optional) Ether Type

Command Mode

/exec

show flow event

show flow event [ name ] [ { <eventname> } ] [ __readonly__ [ { TABLE_nfm_event <event> [ <description> ] <use_count> [ { TABLE_nfm_group <events> [ <buffer_drops> ] [ <fwd_drops> ] [ <acl_drops> ] [ <flow_count> ] [ <latency_threshold> ] [ <latency_unit> ] [ <latency_flow_count> ] [ <rcv_window_zero> ] [ <ip_df> ] [ <tos_value> ] [ <ttl_value> ] [ <max_burst_value> ] } ] } ] ]

Syntax Description


show	Show running system information
flow	Show Analytics information
event	Show Event Configuration
name	(Optional) Show the configuration for a specific Event
eventname	(Optional) Specify a event
__readonly__	(Optional)
TABLE_nfm_event	(Optional) Event Table
event	(Optional) Analytics event
description	(Optional) Description of Analytics event
use_count	(Optional) Use count of Analytics event
TABLE_nfm_group	(Optional)
events	(Optional) Drop or Latency type of events
buffer_drops	(Optional) Capture buffer-drops
fwd_drops	(Optional) Capture fwd-drops
acl_drops	(Optional) Capture acl-drops
flow_count	(Optional) Drop type flow count
latency_threshold	(Optional) Latency threshold value
latency_unit	(Optional) Unit for latency threshold measurement
latency_flow_count	(Optional) Latency type flow count
rcv_window_zero	(Optional) Capture Receive Window Zero events
ip_df	(Optional) Capture IpDf events
tos_value	(Optional) Type of Service value
ttl_value	(Optional) Time To Live value
max_burst_value	(Optional) Max Burst value

Command Mode

/exec

show flow exporter

show flow exporter [ name ] [ <exporter> ] [ __readonly__ { TABLE_flow_exporter <exporter> <description> <dest_intf> <dest> <vrf> <vrf_id> <vrf_resolved> <dest_udp> <events_dest_udp> <source_intf> <source_ip> <dscp> <exp_vers> <seqnum> <samp_table_to> <if_table_to> <stats_to> <temp_to> <rec_sent> <temp_sent> <pkts_sent> <bytes_sent> <dest_unreach> <buff_events> <pkts_drop_no_route> <pkts_drop_other> <pkts_drop_lc_rp> <pkts_drop_op_drops> <time_last_cleared> } ]

Syntax Description


show	Show running system information
flow	Show NetFlow information
exporter	Show NetFlow Exporter Configuration and Statistics
name	(Optional) Show a specific Flow Exporter
exporter	(Optional) Specify an exporter
__readonly__	(Optional)
TABLE_flow_exporter	(Optional)
exporter	(Optional)
description	(Optional)
dest_intf	(Optional)
dest	(Optional)
vrf	(Optional)
vrf_id	(Optional)
vrf_resolved	(Optional)
dest_udp	(Optional)
events_dest_udp	(Optional)
source_intf	(Optional)
source_ip	(Optional)
dscp	(Optional)
seqnum	(Optional)
exp_vers	(Optional)
samp_table_to	(Optional)
if_table_to	(Optional)
stats_to	(Optional)
temp_to	(Optional)
rec_sent	(Optional)
temp_sent	(Optional)
pkts_sent	(Optional)
bytes_sent	(Optional)
dest_unreach	(Optional)
buff_events	(Optional)
pkts_drop_no_route	(Optional)
pkts_drop_other	(Optional)
pkts_drop_lc_rp	(Optional)
pkts_drop_op_drops	(Optional)
time_last_cleared	(Optional)

Command Mode

/exec

show flow exporter

show flow exporter [ name ] [ <exporter> ] [ __readonly__ { TABLE_flow_exporter <exporter> <description> <dest> <vrf> <vrf_id> <vrf_resolved> <dest_udp> <source_intf> <source_ip> <dscp> <exp_vers> <seqnum> <samp_table_to> <if_table_to> <stats_to> <temp_to> <rec_sent> <temp_sent> <pkts_sent> <bytes_sent> <dest_unreach> <buff_events> <pkts_drop_no_route> <pkts_drop_other> <pkts_drop_lc_rp> <pkts_drop_op_drops> <time_last_cleared> } ]

Syntax Description


show	Show running system information
flow	Show NetFlow information
exporter	Show NetFlow Exporter Configuration and Statistics
name	(Optional) Show a specific Flow Exporter
exporter	(Optional) Specify an exporter
__readonly__	(Optional)
TABLE_flow_exporter	(Optional)
exporter	(Optional)
description	(Optional)
dest	(Optional)
vrf	(Optional)
vrf_id	(Optional)
vrf_resolved	(Optional)
dest_udp	(Optional)
source_intf	(Optional)
source_ip	(Optional)
dscp	(Optional)
seqnum	(Optional)
exp_vers	(Optional)
samp_table_to	(Optional)
if_table_to	(Optional)
stats_to	(Optional)
temp_to	(Optional)
rec_sent	(Optional)
temp_sent	(Optional)
pkts_sent	(Optional)
bytes_sent	(Optional)
dest_unreach	(Optional)
buff_events	(Optional)
pkts_drop_no_route	(Optional)
pkts_drop_other	(Optional)
pkts_drop_lc_rp	(Optional)
pkts_drop_op_drops	(Optional)
time_last_cleared	(Optional)

Command Mode

/exec

show flow filter

show flow filter [ __readonly__ [ { TABLE_flow_filter <name> <ipv4acl> <ipv6acl> } ] ]

Syntax Description


show	Show running system information
flow	Show Analytics information
filter	Show filter Configuration
__readonly__	(Optional)
TABLE_flow_filter	(Optional) flow filter data
name	(Optional) Filter Name
ipv4acl	(Optional) IPv4 ACL
ipv6acl	(Optional) IPv4 ACL

Command Mode

/exec

show flow interface

show flow { interface [ <intf> ] | vlan [ <vlan> ] } [ __readonly__ [ { TABLE_flow_interface [ <intf_name> ] [ <vlan_id> ] [ <filter> ] } ] ]

Syntax Description


show	Show running system information
flow	Show Analytics information
interface	Flow interface information
intf	(Optional) Interface
vlan	Flow vlan information
vlan	(Optional) Vlan number
__readonly__	(Optional)
TABLE_flow_interface	(Optional) flow interface data
intf_name	(Optional) Interface
vlan_id	(Optional) VLAN ID
filter	(Optional) Filter name

Command Mode

/exec

show flow interface

show flow { interface [ <intf> ] | vlan [ <vlan> ] } [ __readonly__ [ { TABLE_flow_interface [ <intf_name> ] [ <vlan_id> ] [ <v4in_mon_name> ] [ <v4in_direction> ] [ <v4in_profile_id> ] [ <v6in_mon_name> ] [ <v6in_direction> ] [ <v6in_profile_id> ] [ <l2in_mon_name> ] [ <l2in_direction> ] [ <l2in_profile_id> ] } ] ]

Syntax Description


show	Show running system information
flow	Show NetFlow information
interface	Flow interface information
intf	(Optional) Interface
vlan	Flow vlan information
vlan	(Optional) Vlan number
__readonly__	(Optional)
TABLE_flow_interface	(Optional) flow interface data
intf_name	(Optional) Interface
vlan_id	(Optional) VLAN ID
v4in_mon_name	(Optional) IPv4 Input monitor name
v4in_direction	(Optional) IPv4 Input direction
v4in_profile_id	(Optional) IPv4 Input profile id
v6in_mon_name	(Optional) IPv6 Input monitor name
v6in_direction	(Optional) IPv6 Input direction
v6in_profile_id	(Optional) IPv6 Input profile id
l2in_mon_name	(Optional) l2 Input monitor name
l2in_direction	(Optional) l2 Input direction
l2in_profile_id	(Optional) l2 Input profile id

Command Mode

/exec

show flow monitor

show flow monitor [ name ] [ <monitor> [ cache [ detailed ] ] ] [ __readonly__ [ { TABLE_flow_monitor <monitor> <use_count> [ <description> ] <record> <exporter1> <exporter2> <bucket_id> <src_addr> <dest_addr> <direction> <pkt_count> <byte_count> } ] ]

Syntax Description


show	Show running system information
flow	Show NetFlow information
monitor	Show Monitor Configuration
name	(Optional) Show a specific Flow Monitor
monitor	(Optional) Specify a monitor
cache	(Optional) Flow monitor cache contents
detailed	(Optional) Show the entire cache contents
__readonly__	(Optional)
TABLE_flow_monitor	(Optional)
monitor	(Optional)
use_count	(Optional)
description	(Optional)
record	(Optional)
exporter1	(Optional)
exporter2	(Optional)
bucket_id	(Optional)
src_addr	(Optional)
dest_addr	(Optional)
direction	(Optional)
pkt_count	(Optional)
byte_count	(Optional)

Command Mode

/exec

show flow monitor

show flow monitor [ name ] [ <monitor> [ cache [ detailed ] ] ] [ __readonly__ [ { TABLE_flow_monitor <monitor> <use_count> [ <description> ] <record> <exporter1> <exporter2> <bucket_id> <src_addr> <dest_addr> <direction> <pkt_count> <byte_count> } ] ]

Syntax Description


show	Show running system information
flow	Show NetFlow information
monitor	Show Monitor Configuration
name	(Optional) Show a specific Flow Monitor
monitor	(Optional) Specify a monitor
cache	(Optional) Flow monitor cache contents
detailed	(Optional) Show the entire cache contents
__readonly__	(Optional)
TABLE_flow_monitor	(Optional)
monitor	(Optional)
use_count	(Optional)
description	(Optional)
record	(Optional)
exporter1	(Optional)
exporter2	(Optional)
bucket_id	(Optional)
src_addr	(Optional)
dest_addr	(Optional)
direction	(Optional)
pkt_count	(Optional)
byte_count	(Optional)

Command Mode

/exec

show flow profile

show flow profile [ <profile> ] [ __readonly__ [ { TABLE_flow_profile <name> [ <desc> ] <number-of-users> <export-intvl> <source-port> <packet-id-shift> <burst-intvl-shift> <mtu> [ <guess-threshold-lo> ] [ <guess-threshold-hi> ] [ { TABLE_payload_bin <payload-bin-num> <payload-bin-lo> <payload-bin-hi> } ] [ { TABLE_tcpopthdr_bin <tcpopthdr-bin-num> <tcpopthdr-bin-lo> <tcpopthdr-bin-hi> } ] [ { TABLE_rcvwinsize_bin <rcvwinsize-bin-num> <rcvwinsize-bin-lo> <rcvwinsize-bin-hi> } ] } ] ]

Syntax Description


show	Show running system information
flow	Show Analytics information
profile	Show profile Configuration
profile	(Optional) Specify a profile
__readonly__	(Optional)
TABLE_flow_profile	(Optional) HW flow profile
name	(Optional) HW profile name
desc	(Optional) Description of HW profile
number-of-users	(Optional) No. of users
export-intvl	(Optional) Export Interval
source-port	(Optional) Source Port
packet-id-shift	(Optional) IP Packet ID Shift
burst-intvl-shift	(Optional) Burst Interval Shift
mtu	(Optional) MTU
guess-threshold-lo	(Optional) Sequence Number Guess Threshold Lo
guess-threshold-hi	(Optional) Sequence Number Guess Threshold Hi
TABLE_payload_bin	(Optional) Payload Bin
payload-bin-num	(Optional) Bin Number
payload-bin-lo	(Optional) Bin Lo
payload-bin-hi	(Optional) Bin Hi
TABLE_tcpopthdr_bin	(Optional) TCP Opt Hdr Bin
tcpopthdr-bin-num	(Optional) Bin Number
tcpopthdr-bin-lo	(Optional) Bin Lo
tcpopthdr-bin-hi	(Optional) Bin Hi
TABLE_rcvwinsize_bin	(Optional) Receive Windows Size Bin
rcvwinsize-bin-num	(Optional) Bin Number
rcvwinsize-bin-lo	(Optional) Bin Lo
rcvwinsize-bin-hi	(Optional) Bin Hi

Command Mode

/exec

show flow record

show flow record [ name ] [ { <record> } | { netflow-original } | { netflow { protocol-port | layer2-switched { input } | { ipv4 | ipv6 | l2 } { original-input } } } ] [ __readonly__ [ { TABLE_flow_record <record> [ <description> ] <use_count> <template> [ <match_ip_src> ] [ <match_ip_dst> ] [ <match_proto> ] [ <match_tos> ] [ <match_l4_src> ] [ <match_l4_dst> ] [ <match_ingress> ] [ <match_egress> ] [ <match_src_as_peer> ] [ <match_dst_as_peer> ] [ <match_ipv6_src> ] [ <match_ipv6_dst> ] [ <match_ipv6_flow> ] [ <match_ipv6_option> ] [ <match_ipv6_traffic> ] [ <match_l2_src> ] [ <match_l2_dst> ] [ <match_l2_src_vlan> ] [ <match_l2_dst_vlan> ] [ <match_l2_1q> ] [ <match_l2_cos> ] [ <match_l2_etype> ] [ <match_flow_dir_match> ] [ <match_ipv4v6_src> ] [ <match_ipv4v6_dst> ] [ <collect_src_as> ] [ <collect_dst_as> ] [ <collect_src_as_peer> ] [ <collect_dst_as_peer> ] [ <collect_fwd_status> ] [ <collect_ipv4_next_hop> ] [ <collect_ipv4_bgp_next> ] [ <collect_ipv6_next_hop> ] [ <collect_ipv6_bgp_next> ] [ <collect_tcp_flags> ] [ <collect_flow_dir> ] [ <collect_bytes> ] [ <collect_bytes_long> ] [ <collect_packets> ] [ <collect_packets_long> ] [ <collect_time_first> ] [ <collect_time_last> ] [ <collect_ingress_coll> ] [ <collect_egress_coll> ] [ <collect_sampler_id> ] [ <collect_ip_ver> ] [ <collect_packet_disp> ] } ] ]

Syntax Description


show	Show running system information
flow	Show NetFlow information
record	Show Record Configuration
name	(Optional) Show the configuration for a specific Flow Record
record	(Optional) Specify a record
netflow-original	(Optional) Traditional IPv4 input NetFlow with origin ASs
netflow	(Optional) Traditional NetFlow collection schemes
ipv4	(Optional) IPv4 collection schemes
ipv6	(Optional) IPv6 collection schemes
l2	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED
layer2-switched	(Optional) Layer2-Switched collection schemes
original-input	(Optional) Input NetFlow
input	(Optional) Input NetFlow
protocol-port	(Optional) Protocol and Ports aggregation scheme
__readonly__	(Optional)
TABLE_flow_record	(Optional) flow record data
record	(Optional)
description	(Optional)
use_count	(Optional)
template	(Optional)
match_ip_src	(Optional)
match_ip_dst	(Optional)
match_proto	(Optional)
match_tos	(Optional)
match_l4_src	(Optional)
match_l4_dst	(Optional)
match_ingress	(Optional)
match_egress	(Optional)
match_src_as_peer	(Optional)
match_dst_as_peer	(Optional)
match_ipv6_src	(Optional)
match_ipv6_dst	(Optional)
match_ipv6_flow	(Optional)
match_ipv6_option	(Optional)
match_ipv6_traffic	(Optional)
match_l2_src	(Optional)
match_l2_dst	(Optional)
match_l2_src_vlan	(Optional)
match_l2_dst_vlan	(Optional)
match_l2_1q	(Optional)
match_l2_cos	(Optional)
match_l2_etype	(Optional)
match_flow_dir_match	(Optional)
match_ipv4v6_src	(Optional)
match_ipv4v6_dst	(Optional)
collect_src_as	(Optional)
collect_dst_as	(Optional)
collect_src_as_peer	(Optional)
collect_dst_as_peer	(Optional)
collect_fwd_status	(Optional)
collect_ipv4_next_hop	(Optional)

Bias-Free Language

Results

Chapter: F Show Commands

F Show Commands

show fabric-binding database

show fabric-binding efmd statistics

show fabric-binding fip

show fabric-binding statistics

show fabric-binding status

show fabric-binding violations

show fabric database dci

show fabric database host

show fabric database host statistics

show fabric database host summary

show fabric database profile-map

show fabric database static-host

show fabric database statistics

show fabric forwarding host-db

show fabric forwarding ip local

show fabric forwarding ipv6 local

show fabric multicast globals

show fabric multicast ipv4 l2 vni

show fabric multicast statistics

show fabric multicast vrf

show fabric switch information

show fc2 bind

show fc2 classf

show fc2 exchange

show fc2 exchresp

show fc2 flogi

show fc2 nport

show fc2 plogi

show fc2 plogi_pwwn

show fc2 port brief

show fc2 port drops

show fc2 port state

show fc2 socket

show fc2 sockexch

show fc2 socknotify

show fc2 socknport

show fc2 vsan

show fcalias

show fcdomain

show fcdomain address-allocation

show fcdomain allowed

show fcdomain domain-list

show fcdomain fcid persistent

show fcdomain pending-diff

show fcdomain pending

show fcdomain session-status

show fcdomain statistics

show fcdomain status

show fcdomain vsan

show fcdroplatency

show fcid-allocation area

show fcid-allocation company-id-from-wwn

show fcns database

show fcns statistics

show fcoe-npv issu-impact

show fcoe

show fcoe database

show fcs database

show fcs ie

show fcs platform

show fcs port

show fcs statistics

show fcs vsan

show fctimer

show fctimer D_S_TOV

show fctimer E_D_TOV

show fctimer F_S_TOV

show fctimer R_A_TOV

show fctimer last action status

show fctimer pending-diff

show fctimer pending

show fctimer session status

show fctimer status

show fctimer vsan

show fdmi database