M Show Commands

show mac-list

show mac-list { [ { <maclist-name> | <maclist-cfg-name> } [ { seq <seq_no> | { <mac_addr> [ <mac_mask> ] } } ] ] } [ __readonly__ TABLE_mac_list <name> <seq> <action> <rule> ]

Syntax Description

show

Show running system information

mac-list

Show mac-lists

maclist-name

(Optional) Name of mac-list

maclist-cfg-name

(Optional) Known mac-list name

seq

(Optional) Sequence number

seq_no

(Optional) Sequence number

mac_addr

(Optional) MAC address

mac_mask

(Optional) MAC mask

__readonly__

(Optional)

TABLE_mac_list

(Optional)

name

(Optional)

seq

(Optional)

action

(Optional)

rule

(Optional)

Command Mode

  • /exec

show mac address-table

show mac address-table <module> [ count ] [ static | dynamic | secure ] [ { [ address1 <mac-addr> | { switch-id <swid> [ sub-switch-id <sswid> ] } | vlan1 <id> | [ vdc1 <vdc> | <e-vdc> ] | fe1 <feid> ] + } | { [ address <mac-addr> | interface <interface-name> | vlan <id> | [ vdc <vdc> | <e-vdc> ] | fe <feid> ] + } ] [ hex ] [ __readonly__ <entrycount> <l2entry> <header> <pi_e> <age> <rm> <ifname> <sec> <ntfy> <type> ]

Syntax Description

show

show

mac

MAC configuration commands

address-table

MAC Address Table

module

Module Number

count

(Optional) Number of entries

static

(Optional) Display Static Entries

dynamic

(Optional) Display Dynamic Entries

secure

(Optional) Display Secure Entries

address

(Optional) address

address1

(Optional) address

mac-addr

(Optional) MAC Address

switch-id

(Optional) Remote Switch ID

swid

(Optional) Switch ID

sub-switch-id

(Optional) Remote Sub Switch ID

sswid

(Optional) Sub Switch ID

interface

(Optional) Interface

interface-name

(Optional) Interface name

vlan

(Optional) VLAN

vlan1

(Optional) VLAN

id

(Optional) VLAN ID

vdc

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

vdc1

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

vdc

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

e-vdc

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

fe

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

fe1

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

feid

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

hex

(Optional) display swid/sswid/lid in hex

__readonly__

(Optional)

header

(Optional) Header

pi_e

(Optional) Primary Interface of EARL

age

(Optional) Last seen age in seconds

rm

(Optional) RM

ifname

(Optional) interface name as string

sec

(Optional) secure

ntfy

(Optional) notify

entrycount

(Optional) Number of L2 entries

l2entry

(Optional) L2 Entry String

type

(Optional) MAC type - Static or Dynamic

Command Mode

  • /exec

show mac address-table

show mac address-table [ static | dynamic | secure ] [ local ] [ { [ address1 <mac-addr> | { switch-id <swid> [ sub-switch-id <sswid> ] } | vlan1 <id> ] + } | { [ address <mac-addr> | interface <interface-name> | vlan <id> ] + } | { [ address2 <mac-addr> | interface1 <interface-name> | vni <vni-id> | [ peer-ip <peer-ipv4> | peer-ipv6 <peer-ipv6> ] ] + } | { [ address3 <mac-addr> | interface2 <interface-name> | vni1 <vni-id> | es { <esid-opt1> | <esid-opt2> | all } ] + } ] [ __readonly__ [ { TABLE_mac_address <disp_mac_addr><disp_type><disp_vlan> [ <disp_is_static> ] <disp_age><disp_is_secure><disp_is_ntfy><disp_port> } ] ]

Syntax Description

show

show

mac

MAC configuration commands

address-table

MAC Address Table

static

(Optional) Display Static Entries

dynamic

(Optional) Display Dynamic Entries

secure

(Optional) Display Secure Entries

local

(Optional) Display MAC Entries Learned Locally and Not on the Overlay/VXLAN

address

(Optional) address

address1

(Optional) address

address2

(Optional) address

address3

(Optional) address

mac-addr

(Optional) MAC Address

switch-id

(Optional) Remote Switch ID

swid

(Optional) Switch ID

sub-switch-id

(Optional) Remote Sub Switch ID

sswid

(Optional) Sub Switch ID

interface

(Optional) Interface

interface1

(Optional) Interface

interface-name

(Optional) Interface name

interface2

(Optional) Interface

interface-name

(Optional) Interface name

vlan

(Optional) VLAN

vlan1

(Optional) VLAN

id

(Optional) VLAN ID

vni

(Optional) VXLAN Network Identifier

vni1

(Optional) VXLAN Network Identifier

vni-id

(Optional) VXLAN Network Identifier

peer-ip

(Optional) VXLAN Peer IP Address

peer-ipv4

(Optional) VXLAN Peer IP Address

peer-ipv6

(Optional) VXLAN Peer IPv6 Address

es

(Optional) EVPN Remote ESID

esid-opt1

(Optional) EE:EE:EE:EE:EE:EE:EE:EE:EE:EE ESID Option 1

esid-opt2

(Optional) EEEE.EEEE.EEEE.EEEE.EEEE ESID Option 2

all

(Optional) all ESIs

__readonly__

(Optional)

TABLE_mac_address

(Optional) Mac address table

disp_is_static

(Optional) Static/Dynamic

Command Mode

  • /exec

show mac address-table aging-time

show mac address-table aging-time [ __readonly__ <age_str> <age> ]

Syntax Description

show

show

mac

MAC configuration commands

address-table

MAC Address Table

aging-time

Configured/default age

__readonly__

(Optional)

age_str

(Optional) Age info

age

(Optional) Age time

Command Mode

  • /exec

show mac address-table count

show mac address-table count [ static | dynamic | secure ] [ local ] [ { [ interface <interface-name> | { switch-id <swid> [ sub-switch-id <sswid> ] } | vlan <id> ] + } | { [ interface1 <interface-name> | vni <vni-id> | [ peer-ip <peer-ipv4> | peer-ipv6 <peer-ipv6> ] ] + } ] [ __readonly__ TABLE-macaddtblcount [ <id-out> ] [ <count_str> ] [ <dyn_cnt> ] [ <otv_cnt> ] [ <rvtep_static_cnt> ] [ <static_cnt> ] [ <secure_cnt> ] [ <total_cnt> ] ]

Syntax Description

show

show

mac

MAC configuration commands

address-table

MAC Address Table

count

Number of MAC entries

static

(Optional) Display Static Entries

dynamic

(Optional) Display Dynamic Entries

secure

(Optional) Display Secure Entries

local

(Optional) Display MAC Entries Learned Locally and Not on the Overlay/VXLAN

vlan

(Optional) VLAN

id

(Optional) VLAN ID

interface

(Optional) Interface

interface1

(Optional) Interface

interface-name

(Optional) Interface name

switch-id

(Optional) Remote Switch ID

swid

(Optional) Switch ID

sub-switch-id

(Optional) Remote Sub Switch ID

sswid

(Optional) Sub Switch ID

vni

(Optional) VXLAN Network Identifier

vni-id

(Optional) VXLAN Network Identifier

peer-ip

(Optional) VXLAN Peer IP Address

peer-ipv4

(Optional) VXLAN Peer IP Address

peer-ipv6

(Optional) VXLAN Peer IPv6 Address

__readonly__

(Optional)

TABLE-macaddtblcount

(Optional) MAC Address Dynamic Count Table

id-out

(Optional) MAC Address Table VLAN ID

count_str

(Optional) Count info

total_cnt

(Optional) Total count

dyn_cnt

(Optional) Dynamic count

otv_cnt

(Optional) OTV count

static_cnt

(Optional) Static count

rvtep_static_cnt

(Optional) RVTEP Static count

secure_cnt

(Optional) Secure count

Command Mode

  • /exec

show mac address-table count es

show mac address-table count es { <es-id> | <es-id2> | all } [ __readonly__ { [ <es-id> ] [ <count> ] [ TABLE_macaddtblcount <es-idx> <es-count> ] } ]

Syntax Description

show

show

mac

MAC configuration commands

address-table

MAC Address Table

count

Number of MAC entries

es

EVPN Remote ESID

es-id

EE:EE:EE:EE:EE:EE:EE:EE:EE:EE ESID

es-id2

EEEE.EEEE.EEEE.EEEE.EEEE ESID

all

all ESIs

__readonly__

(Optional)

es-id

(Optional) Specfic ESID

count

(Optional) Number of entries for specific ESID

TABLE_macaddtblcount

(Optional) Display all ESID and its count in mac table

es-idx

(Optional) ESID

es-count

(Optional) Number of entries

Command Mode

  • /exec

show mac address-table limit

show mac address-table limit { all | system | vlan | interface } [ __readonly__ <limit_str> <limit> ]

Syntax Description

show

show

mac

MAC configuration commands

address-table

MAC Address Table

limit

Configured/default mac limit

__readonly__

(Optional)

limit_str

(Optional) Limit info

limit

(Optional) Mac limit

all

Display Mac Limit All

system

System-wide

vlan

VLAN

interface

Interface

Command Mode

  • /exec

show mac address-table limit user-defined

show mac address-table limit user-defined [ __readonly__ <user_cnt> <fhrp_cnt> ]

Syntax Description

show

show

mac

MAC configuration commands

address-table

MAC Address Table

limit

mac limit

user-defined

limit the number of unique mac addresses used on any type of L3 interface

__readonly__

(Optional)

user_cnt

(Optional) user defined mac limit

fhrp_cnt

(Optional) fhrp limit

Command Mode

  • /exec

show mac address-table loop-detect

show mac address-table loop-detect [ __readonly__ <port_loop_detect> ]

Syntax Description

show

show

mac

MAC configuration commands

address-table

MAC

loop-detect

Display Action for Mac Loop Detection

__readonly__

(Optional)

port_loop_detect

(Optional) Display Port Down Action Mac Loop Detect is enabled or disabled

Command Mode

  • /exec

show mac address-table multicast

show mac address-table multicast [ vlan <vlan> | bridge-domain <bdid> ] [ __readonly__ [ TABLE_mac [ <vlan-id> ] [ <mac-addr> ] [ <type> ] [ <age> ] [ TABLE_oif [ <oifs> ] ] ] ]

Syntax Description

show

Show running system information

mac

MAC configuration commands

address-table

MAC Address Table

multicast

mcast mac OIF Static Entry

vlan

(Optional) VLAN

vlan

(Optional) VLAN

bridge-domain

(Optional) BD

bdid

(Optional) BD

__readonly__

(Optional)

TABLE_mac

(Optional)

vlan-id

(Optional)

mac-addr

(Optional)

type

(Optional)

age

(Optional)

TABLE_oif

(Optional)

oifs

(Optional)

Command Mode

  • /exec

show mac address-table notification mac-move

show mac address-table notification mac-move [ __readonly__ TABLE_mac_notif <disp_mm_status> <disp_mm_triggers> <disp_macs_added> <disp_macs_moved> <disp_macs_moved_border> <disp_macs_removed> ]

Syntax Description

show

show

mac

MAC configuration commands

address-table

MAC Address Table

notification

Display Notification Information

mac-move

Mac Move Notification

__readonly__

(Optional) Read Only

TABLE_mac_notif

(Optional) Mac address notification table

disp_mm_status

(Optional) Mac Move Status

disp_mm_triggers

(Optional) # of triggers

disp_macs_added

(Optional) Number of MACs added since system bring up

disp_macs_removed

(Optional) Number of MACs removed since system bring up

disp_macs_moved

(Optional) Number of MACs moved since system bring up

disp_macs_moved_border

(Optional) Number of MACs moved border since system bring up

Command Mode

  • /exec

show macsec mka

show macsec mka [ summary ] [ __readonly__ [ <macsec_status> ] [ TABLE_mka_summary <ifname> <status> <cipher> <keyserver> <policy> <keychain> <fallback_keychain> ] ]

Syntax Description

show

Show running system information

macsec

Show MACSEC information

mka

Show MKA information

summary

(Optional) Show MKA summary information

__readonly__

(Optional)

macsec_status

(Optional) Macsec status

TABLE_mka_summary

(Optional)

ifname

(Optional) Interface

status

(Optional) MACSEC Session status

cipher

(Optional) Operational MACSEC Cipher-suite

keyserver

(Optional) Is this acting as interface key-server

policy

(Optional) MACSEC Policy applied to interface

keychain

(Optional) Keychain associated with interface

fallback_keychain

(Optional) Keychain associated with interface

Command Mode

  • /exec

show macsec mka session

show macsec mka session [ interface <ifname> ] [ details ] [ __readonly__ [ <macsec_status> ] [ TABLE_mka_session <ifname> <sci> <peers> <status> <keyserver><ca_auth_mode> ] [ <sessions> <active_sessions> <pending_sessions> ] [ TABLE_mka_session_details <ifname> <status> <sci> <ssci> <port_id> <ckn> <ca_auth_mode> <mi> <mn> <policy> <ks_prio> <keyserver> <include_icv_indicator> <include_sci> <cipher> <cipher_operational> <window> <conf_offset> <conf_offset_operational> <sak_status> <sak_an> <sak_ki> <sak_kn> <last_sak_rekey_time> <peer_count> <mac_addr> <ether_type> [ TABLE_mka_peer_status <peer_mi> <rxsci> <icv_status> <last_rx_time> ] [ TABLE_mka_fallback <fallback_ckn> <fallback_mi> <fallback_mn> [ TABLE_mka_fallback_peer <fallback_peer_mi> <fallback_rxsci> <fallback_icv_status> <fallback_last_rx_time> ] ] ] ]

Syntax Description

show

Show running system information

macsec

Show MACSEC information

mka

Show MKA information

session

Show MKA session information

interface

(Optional) Specify interface

ifname

(Optional) Interface list

details

(Optional) Show MKA detailed information

__readonly__

(Optional)

macsec_status

(Optional) macsec status

TABLE_mka_session

(Optional)

ifname

(Optional) Interface

sci

(Optional) Interface local TxSCI

peers

(Optional) Number of Peers

status

(Optional) Macsec status of Interface

keyserver

(Optional) Interface keyserver

include_icv_indicator

(Optional) Include ICV indicator in MKDPUs

include_sci

(Optional) Include SCI in secTag

ca_auth_mode

(Optional) CA Authentication Mode

TABLE_mka_session_details

(Optional)

ifname

(Optional) Interface

status

(Optional) Session Status

sci

(Optional) Interface local TxSCI

ssci

(Optional) Interface local TxSSCI

port_id

(Optional) MKA Port Identifier

ckn

(Optional) CAK Name

mi

(Optional) Member Identifier

mn

(Optional) Message Number

policy

(Optional) MACSEC Policy

ks_prio

(Optional) Key-server Priority

cipher

(Optional) MKA Cipher Suite

cipher_operational

(Optional) MKA Cipher Suite Operational

window

(Optional) Replay Window Size

conf_offset

(Optional) Confidentiality Offset

conf_offset_operational

(Optional) Confidentiality Offset Operational

sak_status

(Optional) SAK Status

sak_an

(Optional) SAK AN

sak_ki

(Optional) SAK KI

sak_kn

(Optional) SAK KN

last_sak_rekey_time

(Optional) Last SAK rekey

peer_count

(Optional) Peer Count

mac_addr

(Optional) Eapol Dest mac

ether_type

(Optional) Eapol ether type

TABLE_mka_peer_status

(Optional)

peer_mi

(Optional) Peer MI

rxsci

(Optional) RxSCI

icv_status

(Optional) Peer CAK

last_rx_time

(Optional) Latest Rx MKPDU

TABLE_mka_fallback

(Optional)

fallback_ckn

(Optional) Fallback CAK Name

fallback_mi

(Optional) Fallback Member Identifier

fallback_mn

(Optional) Fallback Message Number

TABLE_mka_fallback_peer

(Optional)

fallback_peer_mi

(Optional) Peer MI

fallback_rxsci

(Optional) RxSCI

fallback_icv_status

(Optional) Peer CAK

fallback_last_rx_time

(Optional) Latest Rx MKPDU

sessions

(Optional) Total number of Sessions

active_sessions

(Optional) Count of Active Sessions

pending_sessions

(Optional) Count of Pending Sessions

Command Mode

  • /exec

show macsec mka statistics

show macsec mka statistics [ interface <ifname> ] [ __readonly__ [ <macsec_status> ] [ TABLE_mka_intf_stats [ [ <ifname2> ] [ TABLE_ca_stats [ [ <ca_stat_ckn> ] [ <ca_stat_pairwise_cak_rekey> ] [ <sa_stat_sak_generated> ] [ <sa_stat_sak_rekey> ] [ <sa_stat_sak_received> ] [ <sa_stat_sak_response_rx> ] [ <mkpdu_stat_mkpdu_tx> ] [ <mkpdu_stat_mkpdu_tx_distsak> ] [ <mkpdu_stat_mkpdu_rx> ] [ <mkpdu_stat_mkpdu_rx_distsak> ] ] ] [ TABLE_idb_stats [ [ <ca_stat_pairwise_cak_rekey> ] [ <sa_stat_sak_generated> ] [ <sa_stat_sak_rekey> ] [ <sa_stat_sak_received> ] [ <sa_stat_sak_response_rx> ] [ <mkpdu_stat_mkpdu_tx> ] [ <mkpdu_stat_mkpdu_tx_distsak> ] [ <mkpdu_stat_mkpdu_rx> ] [ <mkpdu_stat_mkpdu_rx_distsak> ] [ <idb_stat_mkpdu_tx_success> ] [ <idb_stat_mkpdu_tx_fail> ] [ <idb_stat_mkpdu_tx_pkt_build_fail> ] [ <idb_stat_mkpdu_no_tx_on_intf_down> ] [ <idb_stat_mkpdu_no_rx_on_intf_down> ] [ <idb_stat_mkpdu_rx_ca_notfound> ] [ <idb_stat_mkpdu_rx_error> ] [ <idb_stat_mkpdu_rx_success> ] [ <idb_stat_mkpdu_failure_rx_integrity_check_error> ] [ <idb_stat_mkpdu_failure_invalid_peer_mn_error> ] [ <idb_stat_mkpdu_failure_nonrecent_peerlist_mn_error> ] [ <idb_stat_mkpdu_failure_sakuse_kn_mismatch_error> ] [ <idb_stat_mkpdu_failure_sakuse_rx_not_set_error> ] [ <idb_stat_mkpdu_failure_sakuse_key_mi_mismatch_error> ] [ <idb_stat_mkpdu_failure_sakuse_an_not_in_use_error> ] [ <idb_stat_mkpdu_failure_sakuse_ks_rx_tx_not_set_error> ] [ <idb_stat_mkpdu_failure_sakuse_eapol_ethertype_mismatch_error> ] [ <idb_stat_mkpdu_failure_sakuse_eapol_destmac_mismatch_error> ] [ <idb_stat_sak_failure_sak_generate_error> ] [ <idb_stat_sak_failure_hash_generate_error> ] [ <idb_stat_sak_failure_sak_encryption_error> ] [ <idb_stat_sak_failure_sak_decryption_error> ] [ <idb_stat_sak_failure_ick_derivation_error> ] [ <idb_stat_sak_failure_kek_derivation_error> ] [ <idb_stat_sak_failure_invalid_macsec_capability_error> ] [ <idb_stat_macsec_failure_rx_sa_create_error> ] [ <idb_stat_macsec_failure_tx_sa_create_error> ] ] ] ] [ TABLE_mka_gbl_stats [ [ <session_secured> ] [ <session_deleted> ] [ <session_keepalive_timeout> ] [ <ca_stat_pairwise_cak_rekey> ] [ <sa_stat_sak_generated> ] [ <sa_stat_sak_rekey> ] [ <sa_stat_sak_received> ] [ <sa_stat_sak_response_rx> ] [ <mkpdu_stat_mkpdu_rx> ] [ <mkpdu_stat_mkpdu_rx_distsak> ] [ <mkpdu_stat_mkpdu_tx> ] [ <mkpdu_stat_mkpdu_tx_distsak> ] [ <mka_error_session_failure_bring_up_error> ] [ <mka_error_sak_failure_sak_generate_error> ] [ <mka_error_sak_failure_hash_generate_error> ] [ <mka_error_sak_failure_sak_encryption_error> ] [ <mka_error_sak_failure_sak_decryption_error> ] [ <mka_error_sak_failure_sak_cipher_mismatch_error> ] [ <mka_error_ca_failure_ick_derivation_error> ] [ <mka_error_ca_failure_kek_derivation_error> ] [ <mka_error_ca_failure_invalid_macsec_capability_error> ] [ <mka_error_macsec_failure_rx_sa_create_error> ] [ <mka_error_macsec_failure_tx_sa_create_error> ] [ <mka_error_mkpdu_failure_mkpdu_tx_error> ] [ <mka_error_mkpdu_failure_mkpdu_rx_integrity_check_error> ] [ <mka_error_mkpdu_failure_mkpdu_invalid_peer_mn_error> ] [ <mka_error_mkpdu_failure_mkpdu_nonrecent_peerlist_mn_error> ] [ <mka_error_mkpdu_failure_sakuse_kn_mismatch_error> ] [ <mka_error_mkpdu_failure_sakuse_rx_not_set_error> ] [ <mka_error_mkpdu_failure_sakuse_key_mi_mismatch_error> ] [ <mka_error_mkpdu_failure_sakuse_an_not_in_use_error> ] [ <mka_error_mkpdu_failure_sakuse_ks_rx_tx_not_set_error> ] [ <global_stats_mkpdu_rx_invalid_ckn> ] [ <global_stats_mkpdu_tx_pkt_build_fail> ] ] ] ] ]

Syntax Description

show

Show running system information

macsec

Show MACSEC information

mka

Show MKA information

statistics

Show MKA statistics

interface

(Optional) Specify interface

ifname

(Optional) Interface list

__readonly__

(Optional)

macsec_status

(Optional) Macsec status

TABLE_mka_intf_stats

(Optional) MKA Interface statistics

TABLE_ca_stats

(Optional) CA Statistics

ca_stat_ckn

(Optional) CA Statistics CKN

ca_stat_pairwise_cak_rekey

(Optional) CA Statistics Pairwise CAK Rekey

sa_stat_sak_generated

(Optional) SA Statistics SAK generated

sa_stat_sak_rekey

(Optional) SA Statistics SAK rekey

sa_stat_sak_received

(Optional) SA Statistics SAK received

sa_stat_sak_response_rx

(Optional) SA Statistics SAK response received

mkpdu_stat_mkpdu_tx

(Optional) MKPDU Statistics MKPDU Tx

mkpdu_stat_mkpdu_tx_distsak

(Optional) MKPDU Statistics MKPDU Tx distributed SAK

mkpdu_stat_mkpdu_rx

(Optional) MKPDU Statistics MKPDU Rx

mkpdu_stat_mkpdu_rx_distsak

(Optional) MKPDU Statistics MKPDU Rx distributed SAK

TABLE_idb_stats

(Optional) IDB Statistics

ca_stat_pairwise_cak_rekey

(Optional) CA Statistics pairwise CAK rekey

sa_stat_sak_generated

(Optional) SA Statistics SAK generated

sa_stat_sak_rekey

(Optional) SA Statistics SAK rekey

sa_stat_sak_received

(Optional) SA Statistics SAK received

sa_stat_sak_response_rx

(Optional) SA Statistics SAK response received

mkpdu_stat_mkpdu_tx

(Optional) MKPDU Statistics MKPDU Tx

mkpdu_stat_mkpdu_tx_distsak

(Optional) MKPDU Statistics MKPDU Tx distributed SAK

mkpdu_stat_mkpdu_rx

(Optional) MKPDU Statistics MKPDU Rx

mkpdu_stat_mkpdu_rx_distsak

(Optional) MKPDU Statistics MKPDU Rx distributed SAK

idb_stat_mkpdu_tx_success

(Optional) IDB Statistics MKPDU Tx success

idb_stat_mkpdu_tx_fail

(Optional) IDB Statistics MKPDU Tx fail

idb_stat_mkpdu_tx_pkt_build_fail

(Optional) IDB Statistics MKPDU Tx packet build fail

idb_stat_mkpdu_no_tx_on_intf_down

(Optional) IDB Statistics MKPDU no Tx on interface down

idb_stat_mkpdu_no_rx_on_intf_down

(Optional) IDB Statistics MKPDU no Rx on interface down

idb_stat_mkpdu_rx_ca_notfound

(Optional) IDB Statistics MKPDU Rx CA not found

idb_stat_mkpdu_rx_error

(Optional) IDB Statistics MKPDU Rx error

idb_stat_mkpdu_rx_success

(Optional) IDB Statistics MKPDU Rx success

idb_stat_mkpdu_failure_rx_integrity_check_error

(Optional) IDB Statistics - MKPDU failure - Rx integrity check error

idb_stat_mkpdu_failure_invalid_peer_mn_error

(Optional) IDB Statistics - MKPDU failure - invalid peer MN error

idb_stat_mkpdu_failure_nonrecent_peerlist_mn_error

(Optional) IDB Statistics - MKPDU failure - non recent peerlist MN error

idb_stat_mkpdu_failure_sakuse_kn_mismatch_error

(Optional) IDB Statistics - MKPDU failure - SAKuse KN mismatch error

idb_stat_mkpdu_failure_sakuse_rx_not_set_error

(Optional) IDB Statistics - MKPDU failure - SAKuse Rx not set error

idb_stat_mkpdu_failure_sakuse_key_mi_mismatch_error

(Optional) IDB Statistics - MKPDU failure - SAKuse key MI mismatch error

idb_stat_mkpdu_failure_sakuse_an_not_in_use_error

(Optional) IDB Statistics - MKPDU failure - SAKuse AN not in use error

idb_stat_mkpdu_failure_sakuse_ks_rx_tx_not_set_error

(Optional) IDB Statistics - MKPDU failure - SAKuse KS Rx Tx not set error

idb_stat_mkpdu_failure_sakuse_eapol_ethertype_mismatch_error

(Optional) IDB Statistics - MKPDU failure - SAKuse EAPOL ethertype mismatch error

idb_stat_mkpdu_failure_sakuse_eapol_destmac_mismatch_error

(Optional) IDB Statistics - MKPDU failure - SAKuse EAPOL destMAC mismatch error

idb_stat_sak_failure_sak_generate_error

(Optional) IDB Statistics - SAK failure - SAK generate error

idb_stat_sak_failure_hash_generate_error

(Optional) IDB Statistics - SAK failure - Hash generate error

idb_stat_sak_failure_sak_encryption_error

(Optional) IDB Statistics - SAK failure - SAK encryption error

idb_stat_sak_failure_sak_decryption_error

(Optional) IDB Statistics - SAK failure - SAK decryption error

idb_stat_sak_failure_ick_derivation_error

(Optional) IDB Statistics - SAK failure - ICK derivation error

idb_stat_sak_failure_kek_derivation_error

(Optional) IDB Statistics - SAK failure - KEK derivation error

idb_stat_sak_failure_invalid_macsec_capability_error

(Optional) IDB Statistics - SAK failure - invalid MACsec capability error

idb_stat_macsec_failure_rx_sa_create_error

(Optional) IDB Statistics - SAK failure - Rx SA create error

idb_stat_macsec_failure_tx_sa_create_error

(Optional) IDB Statistics - SAK failure - Tx SA create error

TABLE_mka_gbl_stats

(Optional) MKA Global Statistics

session_secured

(Optional) Session secured Events

session_deleted

(Optional) Session deleted Events

session_keepalive_timeout

(Optional) Session keepalive timeout Events

ca_stat_pairwise_cak_rekey

(Optional) CA Statistics pairwise CAK rekey

sa_stat_sak_generated

(Optional) SA Statistics SAK generated

sa_stat_sak_rekey

(Optional) SA Statistics SAK rekey

sa_stat_sak_received

(Optional) SA Statistics SAK received

sa_stat_sak_response_rx

(Optional) SA Statistics SAK response received

mkpdu_stat_mkpdu_rx

(Optional) MKPDU Statistics MKPDU received

mkpdu_stat_mkpdu_rx_distsak

(Optional) MKPDU Statistics MKPDU received distributed SAK

mkpdu_stat_mkpdu_tx

(Optional) MKPDU Statistics MKPDU transmitted

mkpdu_stat_mkpdu_tx_distsak

(Optional) MKPDU Statistics MKPDU transmitted distributed SAK

mka_error_session_failure_bring_up_error

(Optional) MKA Error - Session failure - Bring up error

mka_error_sak_failure_sak_generate_error

(Optional) MKA Error - SAK failure - SAK generate error

mka_error_sak_failure_hash_generate_error

(Optional) MKA Error - SAK failure - Hash generate error

mka_error_sak_failure_sak_encryption_error

(Optional) MKA Error - SAK failure - SAK encryption error

mka_error_sak_failure_sak_decryption_error

(Optional) MKA Error - SAK failure - SAK decryption error

mka_error_sak_failure_sak_cipher_mismatch_error

(Optional) MKA Error - SAK failure - SAK Cipher mismatch error

mka_error_ca_failure_ick_derivation_error

(Optional) MKA Error - CA failure - ICK derivation error

mka_error_ca_failure_kek_derivation_error

(Optional) MKA Error - CA failure - KEK derivation error

mka_error_ca_failure_invalid_macsec_capability_error

(Optional) MKA Error - CA failure - Invalid MACsec capability error

mka_error_macsec_failure_rx_sa_create_error

(Optional) MKA Error - MACsec failure - Rx SA create error

mka_error_macsec_failure_tx_sa_create_error

(Optional) MKA Error - MACsec failure - Tx SA create error

mka_error_mkpdu_failure_mkpdu_tx_error

(Optional) MKA Error - MKPDU failure - MKPDU Tx error

mka_error_mkpdu_failure_mkpdu_rx_integrity_check_error

(Optional) MKA Error - MKPDU failure - MKPDU Rx integrity check error

mka_error_mkpdu_failure_mkpdu_invalid_peer_mn_error

(Optional) MKA Error - MKPDU failure - invalid peer MN error

mka_error_mkpdu_failure_mkpdu_nonrecent_peerlist_mn_error

(Optional) MKA Error - MKPDU failure - non recent peerlist MN error

mka_error_mkpdu_failure_sakuse_kn_mismatch_error

(Optional) MKA Error - MKPDU failure - SAKuse KN mismatch error

mka_error_mkpdu_failure_sakuse_rx_not_set_error

(Optional) MKA Error - MKPDU failure - SAKuse Rx not set error

mka_error_mkpdu_failure_sakuse_key_mi_mismatch_error

(Optional) MKA Error - MKPDU failure - SAKuse key MI mismatch error

mka_error_mkpdu_failure_sakuse_an_not_in_use_error

(Optional) MKA Error - MKPDU failure - SAKuse AN not in use error

mka_error_mkpdu_failure_sakuse_ks_rx_tx_not_set_error

(Optional) MKA Error - MKPDU failure - SAKuse KS Rx Tx not set error

global_stats_mkpdu_rx_invalid_ckn

(Optional) Global Statistics MKPDU received invalid CKN

global_stats_mkpdu_tx_pkt_build_fail

(Optional) Global Statistics Transmit Pkt build fail

ifname2

(Optional) MACSEC Interface Name

Command Mode

  • /exec

show macsec policy

show macsec policy [ <policy_name> ] [ __readonly__ { TABLE_macsec_policy <name> <cipher_suite> <keyserver_priority> <window_size> <conf_offset> <security_policy> <sak-expiry-time> <include_icv_indicator> <include_sci> } ]

Syntax Description

show

Show running system information

macsec

Show MACSEC policy information

policy

Show MACSEC policy information

policy_name

(Optional) Name of MACSEC Policy

__readonly__

(Optional)

TABLE_macsec_policy

(Optional)

name

(Optional) MACSEC Policy Name

cipher_suite

(Optional) Cipher Suite

keyserver_priority

(Optional) KeyServer Priority

window_size

(Optional) Window Size

conf_offset

(Optional) Confidentiality Offset

security_policy

(Optional) Security Policy

sak-expiry-time

(Optional) SAK expiry on time interval

include_icv_indicator

(Optional) Include ICV indicator in MKPDUs

include_sci

(Optional) Include SCI in secTag

Command Mode

  • /exec

show macsec secy statistics

show macsec secy statistics [ interface <ifname> ] [ __readonly__ [ <macsec_status> ] [ TABLE_statistics <ifname2> [ <in_pkts_unicast_uncontrolled> ] [ <in_pkts_multicast_uncontrolled> ] [ <in_pkts_broadcast_uncontrolled> ] [ <in_rx_drop_pkts_uncontrolled> ] [ <in_rx_err_pkts_uncontrolled> ] [ <in_pkts_unicast_controlled> ] [ <in_pkts_multicast_controlled> ] [ <in_pkts_broadcast_controlled> ] [ <in_pkts_controlled> ] [ <in_rx_drop_pkts_controlled> ] [ <in_rx_err_pkts_controlled> ] [ <in_octets_uncontrolled> ] [ <in_octets_controlled> ] [ <input_rate_uncontrolled_pps> ] [ <input_rate_uncontrolled_bps> ] [ <input_rate_controlled_pps> ] [ <input_rate_controlled_bps> ] [ <out_pkts_unicast_uncontrolled> ] [ <out_pkts_multicast_uncontrolled> ] [ <out_pkts_broadcast_uncontrolled> ] [ <out_rx_drop_pkts_uncontrolled> ] [ <out_rx_err_pkts_uncontrolled> ] [ <out_pkts_unicast_controlled> ] [ <out_pkts_multicast_controlled> ] [ <out_pkts_broadcast_controlled> ] [ <out_pkts_controlled> ] [ <out_rx_drop_pkts_controlled> ] [ <out_rx_err_pkts_controlled> ] [ <out_octets_uncontrolled> ] [ <out_octets_controlled> ] [ <out_octets_common> ] [ <output_rate_uncontrolled_pps> ] [ <output_rate_uncontrolled_bps> ] [ <output_rate_controlled_pps> ] [ <output_rate_controlled_bps> ] [ <in_pkts_transform_error> ] [ <in_pkts_control> ] [ <in_pkts_untagged> ] [ <in_pkts_no_tag> ] [ <in_pkts_badtag> ] [ <in_pkts_no_sci> ] [ <in_pkts_unknown_sci> ] [ <in_pkts_tagged_ctrl> ] [ <out_pkts_transform_error> ] [ <out_pkts_control> ] [ <out_pkts_untagged> ] [ TABLE_rx_sa_an <rx_sa_an> [ <in_pkts_unchecked> ] [ <in_pkts_delayed> ] [ <in_pkts_late> ] [ <in_pkts_ok> ] [ <in_pkts_invalid> ] [ <in_pkts_not_valid> ] [ <in_pkts_not_using_sa> ] [ <in_pkts_unused_sa> ] [ <in_octets_decrypted> ] [ <in_octets_validated> ] ] [ TABLE_tx_sa_an <tx_sa_an> [ <out_pkts_encrypted_protected> ] [ <out_pkts_too_long> ] [ <out_pkts_sa_not_inuse> ] [ <out_octets_encrypted_protected> ] ] ] ]

Syntax Description

show

Show running system information

macsec

Show MACSEC information

secy

Show MACSEC secy entity information

statistics

Show MACSEC secy statistics

interface

(Optional) Specify interface

ifname

(Optional) Interface list

__readonly__

(Optional)

macsec_status

(Optional) Macsec status

TABLE_statistics

(Optional) MACsec secy statistics

in_pkts_unicast_uncontrolled

(Optional) In Pkts Unicast Uncontrolled

in_pkts_multicast_uncontrolled

(Optional) In Pkts Multicast Uncontrolled

in_pkts_broadcast_uncontrolled

(Optional) In Pkts Broadcast Uncontrolled

in_rx_drop_pkts_uncontrolled

(Optional) In Rx Drop Pkts Uncontrolled

in_rx_err_pkts_uncontrolled

(Optional) In Rx Err Pkts Uncontrolled

in_pkts_unicast_controlled

(Optional) In Pkts Unicast Controlled

in_pkts_multicast_controlled

(Optional) In Pkts Multicast Controlled

in_pkts_broadcast_controlled

(Optional) In Pkts Broadcast Controlled

in_pkts_controlled

(Optional) In Pkts Controlled

in_rx_drop_pkts_controlled

(Optional) In Rx Drop Pkts Controlled

in_rx_err_pkts_controlled

(Optional) In Rx Err Pkts Controlled

in_octets_uncontrolled

(Optional) In Octets Uncontrolled

in_octets_controlled

(Optional) In Octets Controlled

input_rate_uncontrolled_bps

(Optional) Input Rate Uncontrolled BPS

input_rate_uncontrolled_pps

(Optional) Input Rate Uncontrolled PPS

input_rate_controlled_bps

(Optional) Input Rate Controlled BPS

input_rate_controlled_pps

(Optional) Input Rate Controlled PPS

out_pkts_unicast_uncontrolled

(Optional) Out Pkts Unicast Uncontrolled

out_pkts_multicast_uncontrolled

(Optional) Out Pkts Multicast Uncontrolled

out_pkts_broadcast_uncontrolled

(Optional) Out Pkts Broadcast Uncontrolled

out_rx_drop_pkts_uncontrolled

(Optional) Out Rx Drop Pkts Uncontrolled

out_rx_err_pkts_uncontrolled

(Optional) Out Rx Err Pkts Uncontrolled

out_pkts_unicast_controlled

(Optional) Out Pkts Unicast Controlled

out_pkts_multicast_controlled

(Optional) Out Pkts Multicast Controlled

out_pkts_broadcast_controlled

(Optional) Out Pkts Broadcast Controlled

out_pkts_controlled

(Optional) Out Pkts Controlled

out_rx_drop_pkts_controlled

(Optional) Out Rx Drop Pkts Controlled

out_rx_err_pkts_controlled

(Optional) Out Rx Err Pkts Controlled

out_octets_uncontrolled

(Optional) Out Octets Uncontrolled

out_octets_controlled

(Optional) Out Ocets Controlled

out_octets_common

(Optional) Out Octets Common

output_rate_uncontrolled_bps

(Optional) Output Rate Uncontrolled BPS

output_rate_uncontrolled_pps

(Optional) Output Rate Uncontrolled PPS

output_rate_controlled_bps

(Optional) Output Rate Controlled BPS

output_rate_controlled_pps

(Optional) Output Rate Controlled PPS

in_pkts_transform_error

(Optional) In Pkts Transform Error

in_pkts_control

(Optional) In Pkts Control

in_pkts_untagged

(Optional) In Pkts Untagged

in_pkts_no_tag

(Optional) In Pkts No Tag

in_pkts_badtag

(Optional) In Pkts Bad Tag

in_pkts_no_sci

(Optional) In Pkts No SCI

in_pkts_unknown_sci

(Optional) In Pkts Unknown SCI

in_pkts_tagged_ctrl

(Optional) In Pkts Tagged Control

out_pkts_transform_error

(Optional) Out Pkts Transform Error

out_pkts_control

(Optional) Out Pkts Control

out_pkts_untagged

(Optional) Out Pkts Untagged

TABLE_rx_sa_an

(Optional) MACsec secy rx_sa_an statistics

rx_sa_an

(Optional) Rx SA AN

in_pkts_unchecked

(Optional) In Pkts Unchecked

in_pkts_delayed

(Optional) In Pkts Delayed

in_pkts_late

(Optional) In Pkts Late

in_pkts_ok

(Optional) In Pkts OK

in_pkts_invalid

(Optional) In Pkts Invalid

in_pkts_not_valid

(Optional) In Pkts not Valid

in_pkts_not_using_sa

(Optional) In Pkts not using SA

in_pkts_unused_sa

(Optional) In Pkts Unused SA

in_octets_decrypted

(Optional) In Octets Decrypted

in_octets_validated

(Optional) In Octets Validated

TABLE_tx_sa_an

(Optional) MACsec secy tx_sa_an statistics

tx_sa_an

(Optional) Tx SA AN

out_pkts_encrypted_protected

(Optional) Out Pkts Encrypted Protected

out_pkts_too_long

(Optional) Out Pkts too Long

out_pkts_sa_not_inuse

(Optional) Out Pkts SA not in use

out_octets_encrypted_protected

(Optional) Out octets Encrypted Protected

ifname2

(Optional) MACSEC Interface Name

Command Mode

  • /exec

show maintenance maint-delay

show maintenance maint-delay [ __readonly__ <delay> ]

Syntax Description

show

Show running system information

maintenance

maintenance

maint-delay

maintenance mode CLI release delay value

__readonly__

(Optional)

delay

(Optional) delay value in seconds

Command Mode

  • /exec

show maintenance on-reload reset-reasons

show maintenance on-reload reset-reasons [ __readonly__ [ TABLE_reset_reason <reset_reason> ] <rr_bitmap> ]

Syntax Description

show

Show running system information

maintenance

maintenance

on-reload

on reload maintenance mode configuration

reset-reasons

system reset reasons

__readonly__

(Optional)

TABLE_reset_reason

(Optional)

rr_bitmap

(Optional) reset reason bitmap

reset_reason

(Optional) system reset reason

Command Mode

  • /exec

show maintenance profile

show maintenance profile [ <mode> ] [ __readonly__ TABLE_profile <name> [ TABLE_cfg <cfg> ] ]

Syntax Description

show

Show running system information

maintenance

maintenance

profile

maintenance profile

mode

(Optional)

__readonly__

(Optional)

TABLE_profile

(Optional)

name

(Optional) profile name

TABLE_cfg

(Optional)

cfg

(Optional) profile config

Command Mode

  • /exec

show maintenance snapshot-delay

show maintenance snapshot-delay [ __readonly__ <delay> ]

Syntax Description

show

Show running system information

maintenance

maintenance

snapshot-delay

after_maintenance snapshot delay value

__readonly__

(Optional)

delay

(Optional) delay value in seconds

Command Mode

  • /exec

show maintenance timeout

show maintenance timeout [ __readonly__ <timeout> ]

Syntax Description

show

Show running system information

maintenance

maintenance

timeout

timeout value

__readonly__

(Optional)

timeout

(Optional) timeout value

Command Mode

  • /exec

show mcast

show mcast [ vsan <i0> ]

Syntax Description

show

Show running system information

vsan

(Optional) Enter VSAN

i0

(Optional) VSAN id

Command Mode

  • /exec

show module

show module [ { <module> } | { <s0> [ <santa-cruz-range> ] } | { fabric [ <module> ] } ] [ __readonly__ { TABLE_modinfo <modinf> <ports> <modtype> <model> <status> } [ { TABLE_modpwrinfo <modpwr> <pwrstat> <reason> } ] { TABLE_modwwninfo <modwwn> <sw> <hw> <slottype> } [ { TABLE_modapplinfo <modappl> <desc> <applver> } ] { TABLE_modmacinfo <modmac> <mac> <serialnum> } { TABLE_moddiaginfo <mod> <diagstatus> } [ { TABLE_modinfo <modinf> <ports> <modtype> <model> <status> } [ { TABLE_modpwrinfo <modpwr> <pwrstat> <reason> } ] { TABLE_modwwninfo <modwwn> <sw> <hw> <slottype> } [ { TABLE_modapplinfo <modappl> <desc> <applver> } ] { TABLE_modmacinfo <modmac> <mac> <serialnum> } { TABLE_moddiaginfo <mod> <diagstatus> } ] [ { TABLE_xbarinfo <xbarinf> <xbarports> <xbartype> <xbarmodel> <xbarstatus> } ] [ { TABLE_xbarpwrinfo <xbarpwr> <xbarpwrstat> <xbarreason> } ] [ { TABLE_xbarwwninfo <xbarwwn> <xbarsw> <xbarhw> <xbarwwnstr> } ] [ { TABLE_xbarmacinfo <xbarmac> <xbarmacaddr> <xbarserialnum> } ] ]

Syntax Description

show

Show running system information

module

Show module information

module

(Optional) Enter module number

s0

(Optional) Show xbar information

santa-cruz-range

(Optional) please enter the xbar number

fabric

(Optional) Show fabric information

__readonly__

(Optional)

TABLE_modinfo

(Optional) Show Module info

modinf

(Optional) Module

ports

(Optional) Num Ports

modtype

(Optional) Module Type

model

(Optional) Model

status

(Optional) Status

TABLE_modpwrinfo

(Optional) Mod Pwr Info

modpwr

(Optional) Module

pwrstat

(Optional) Power Status

reason

(Optional) Reason

TABLE_modwwninfo

(Optional) Mod WWN Info

modwwn

(Optional) Module

sw

(Optional) SW Ver

hw

(Optional) HW Ver

slottype

(Optional) Slot

TABLE_modapplinfo

(Optional) Mod Appl image info

modappl

(Optional) Module

desc

(Optional) Image desc

applver

(Optional) Version

TABLE_modmacinfo

(Optional) Mod MAC Info

modmac

(Optional) Module

mac

(Optional) MAC

serialnum

(Optional) Serial Num

TABLE_moddiaginfo

(Optional) Mod diag info

mod

(Optional) Module

diagstatus

(Optional) Diag status

TABLE_xbarinfo

(Optional) Show xbar info

xbarinf

(Optional) Module

xbarports

(Optional) Num Ports

xbartype

(Optional) Module Type

xbarmodel

(Optional) Model

xbarstatus

(Optional) Status

TABLE_xbarpwrinfo

(Optional) Xbar Pwr Info

xbarpwr

(Optional) Module

xbarpwrstat

(Optional) Power Status

xbarreason

(Optional) Reason

TABLE_xbarwwninfo

(Optional) Xbar WWN Info

xbarwwn

(Optional) Module

xbarsw

(Optional) SW Ver

xbarhw

(Optional) HW Ver

xbarwwnstr

(Optional) WWN

TABLE_xbarmacinfo

(Optional) Xbar MAC Info

xbarmac

(Optional) Module

xbarmacaddr

(Optional) MAC

xbarserialnum

(Optional) Serial Num

Command Mode

  • /exec

show module bandwidth-fairness

show module <module> bandwidth-fairness [ __readonly__ { TABLE_fairness <statement> } ]

Syntax Description

show

Show running system information

module

Show module information

module

Enter module number

bandwidth-fairness

Show bandwidth fairness status

__readonly__

(Optional)

TABLE_fairness

(Optional)

statement

(Optional)

Command Mode

  • /exec

show module port type

show module <module1> port type [ __readonly__ { TABLE_porttype <slot1> <port1> <opertype> <admintype> } ]

Syntax Description

show

Show running system information

module

Show module information

module1

Enter module number

port

Show port type

type

Show port type

__readonly__

(Optional)

TABLE_porttype

(Optional) Module port type

slot1

(Optional) Module number

port1

(Optional) Port number

opertype

(Optional) Operational type for port

admintype

(Optional) Admin type for port

Command Mode

  • /exec

show module uptime

show module uptime [ __readonly__ { TABLE_uptimeinf <slot> <starttime> <daysup> <hoursup> <minutesup> <secondsup> } ]

Syntax Description

show

Show running system information

module

Show module information

uptime

Show how long the module has been up and running

__readonly__

(Optional)

TABLE_uptimeinf

(Optional) Show uptime info

slot

(Optional) Slot

starttime

(Optional) Start Time

daysup

(Optional) Days Up

hoursup

(Optional) Hours Up

minutesup

(Optional) Minutes Up

secondsup

(Optional) Seconds Up

Command Mode

  • /exec

show monitor

show monitor [ __readonly__ TABLE_session <session_number> <state> <state_reason> <description> ]

Syntax Description

show

Show running system information

monitor

Show Ethernet SPAN information

__readonly__

(Optional) Read only

TABLE_session

(Optional) show monitor

session_number

(Optional) session id

state

(Optional) State

state_reason

(Optional) State reason

description

(Optional) Session Description

Command Mode

  • /exec

show monitor session

show monitor session { all | <session_number> | warp | range <session_range> } [ { drops | brief } ] [ __readonly__ [ TABLE_session <session_number> [ <description> ] [ <type> ] [ <version> ] [ <state> ] [ <state_reason> ] [ <err_desc> ] [ <flow_id> ] [ <switch_id> ] [ <erspan_granularity> ] [ <vrf_name> ] [ <acl_name> ] [ <erspan_ttl> ] [ <erspan_dscp> ] [ <header_type> ] [ <span_mtu> ] [ <span_sampling> ] [ <ip_filter> ] + [ <dst_ip> ] [ <dst_ipv6> ] [ <origin_ip> ] [ <origin_ipv6> ] [ <src_ip> ] [ <src_ipv6> ] [ <control_pkt_filter> ] [ TABLE_sources_rx [ <sources_rx> ] ] [ TABLE_sources_tx [ <sources_tx> ] ] [ TABLE_sources_both [ <sources_both> ] ] [ <source_vlans_rx> ] [ <source_vlans_tx> ] [ <source_vlans_both> ] [ <source_vsans_rx> ] [ <tree-id> <switchid> ] + [ <filter_vlans> ] [ <destinations> ] + [ <acl_destinations> ] + [ <rate_limit_cap> ] + [ <mtu_capability> ] + [ <sampling_capability> ] + [ <mcbe> ] + [ <l3_egress_span> ] + [ <erspan_acl> ] + [ <erspan_v3_cap> ] + [ <erspan_v2_cap> ] + [ <erspan_gran_cap> ] + [ <fex_ingress_intf> ] + [ <sources_rx_2> ] + [ <marker_time_intv> ] [ <marker_pkt_count> ] [ <marker_pkt_fail> ] [ <erspan_egress_if> ] [ <drops> ] [ <inactive> ] ] ]

Syntax Description

show

Show running system information

monitor

Show Ethernet SPAN information

session

Show session info

all

All sessions

session_number

warp

warp session

range

Specify a range

session_range

brief

(Optional) Brief information

drops

(Optional) show drop count

__readonly__

(Optional) Read only

TABLE_session

(Optional) show monitor

session_number

(Optional) session number

description

(Optional) Session Description

type

(Optional) Session type

version

(Optional) Erspan source version: v2/v3

state

(Optional) State

state_reason

(Optional) State reason

err_desc

(Optional) Error Description

flow_id

(Optional) erspan-id

switch_id

(Optional) erspan_switch-id

erspan_granularity

(Optional) ERSPAN Type III Granularity

vrf_name

(Optional) ERSPAN session VRF

acl_name

(Optional) ERSPAN session ACL

erspan_ttl

(Optional) ERSPAN TTL Value

erspan_dscp

(Optional) ERSPAN DSCP Value

header_type

(Optional) ERSPAN Header Type

span_mtu

(Optional) SPAN MTU value

span_sampling

(Optional) SPAN sampling range

ip_filter

(Optional) IP filter value

dst_ip

(Optional) ERSPAN destination IP

dst_ipv6

(Optional) ERSPAN destination IPv6

origin_ip

(Optional) ERSPAN origin IP at source router

origin_ipv6

(Optional) ERSPAN origin IPv6 at source router

src_ip

(Optional) ERSPAN source IP

src_ipv6

(Optional) ERSPAN source IPv6

control_pkt_filter

(Optional) Control packet filter value

TABLE_sources_rx

(Optional) ingress intf table

sources_rx

(Optional) List of ingress sources

TABLE_sources_tx

(Optional) egress intf table

sources_tx

(Optional) List of egress sources

TABLE_sources_both

(Optional) bi-direction intf table

sources_both

(Optional) List of sources in both directions

source_vlans_rx

(Optional) Source ingress vlan

source_vsans_rx

(Optional) Source ingress vsan

source_vlans_tx

(Optional) Source egress vlan

source_vlans_both

(Optional) Source vlans in both directions

tree-id

(Optional) proxy layer2 gateway source tree-id

switchid

(Optional) proxy layer2 gateway source switchid

filter_vlans

(Optional) Filter vlans

destinations

(Optional) List of destinations

acl_destinations

(Optional) List of interfaces that wont work for acl capture

rate_limit_cap

(Optional) List of modules that support Rate Limit

mtu_capability

(Optional) List of modules that support MTU

sampling_capability

(Optional) List of modules that support Sampling

mcbe

(Optional) List all modules that support multicast best effort

l3_egress_span

(Optional) List of modules that support L3 Multicast Egress SPAN

erspan_acl

(Optional) List of modules that support ERSPAN ACL filtering

erspan_v3_cap

(Optional) List of modules that support erspan version3

erspan_v2_cap

(Optional) List of modules that support erspan version2

erspan_gran_cap

(Optional) List of modules that support the granularity set

fex_ingress_intf

(Optional) List of fex interfaces that wont work for ingress span

erspan_egress_if

(Optional) Egress interface for ERSPAN SRC session

sources_rx_2

(Optional) List of ingress sources

marker_time_intv

(Optional) Marker packet interval

marker_pkt_count

(Optional) Marker packet count

marker_pkt_fail

(Optional) Marker packet fail count

drops

(Optional) Drop count

inactive

(Optional) Session is inactive

Command Mode

  • /exec

show mpls extended-ecmp

show mpls extended-ecmp

Syntax Description

show

Show running system information

mpls

MPLS routing ECMP mode

extended-ecmp

extended-ecmp mode (default)

Command Mode

  • /exec

show mpls forwarding statistics

show mpls forwarding statistics [ interface { <interface> | all } ] [ __readonly__ { TABLE_mpls_stats [ <intf_name> ] <mpls_packets_sent> <mpls_bytes_sent> <mpls_packets_received> <mpls_bytes_received> <mpls_packets_forwarded> <mpls_bytes_forwarded> <mpls_packets_originated> <mpls_bytes_originated> <mpls_packets_consumed> <mpls_bytes_consumed> <mpls_packets_input_dropped> <mpls_bytes_input_dropped> <mpls_packets_output_dropped> <mpls_bytes_output_dropped> } ]

Syntax Description

show

Show running system information

mpls

MPLS information

forwarding

Display MPLS software forwarded

statistics

Traffic statistics

interface

(Optional) Interface specific information

interface

(Optional) Interface chosen to display statistics

all

(Optional) All interfaces

__readonly__

(Optional)

TABLE_mpls_stats

(Optional) MPLS forwarding statistics

intf_name

(Optional) Interace name

mpls_packets_sent

(Optional) mpls packet sent

mpls_bytes_sent

(Optional) mpls bytes sent

mpls_packets_received

(Optional) mpls packet received

mpls_bytes_received

(Optional) mpls bytes received

mpls_packets_forwarded

(Optional) mpls packet forwarded

mpls_bytes_forwarded

(Optional) mpls bytes forwarded

mpls_packets_originated

(Optional) mpls packet originated

mpls_bytes_originated

(Optional) mpls bytes originated

mpls_packets_consumed

(Optional) mpls packet consumed

mpls_bytes_consumed

(Optional) mpls bytes consumed

mpls_packets_input_dropped

(Optional) mpls packet input dropped

mpls_bytes_input_dropped

(Optional) mpls bytes input dropped

mpls_packets_output_dropped

(Optional) mpls packet output dropped

mpls_bytes_output_dropped

(Optional) mpls bytes output dropped

Command Mode

  • /exec

show mpls interfaces

show mpls interfaces [ __readonly__ TABLE_mpls_interface <intf> <oper> ]

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

interfaces

Display MPLS Interfaces

__readonly__

(Optional)

TABLE_mpls_interface

(Optional)

intf

(Optional)

oper

(Optional)

Command Mode

  • /exec

show mpls interfaces detail

show mpls interfaces detail [ __readonly__ TABLE_mpls_interface_det <intf> { <client_name> + } <oper_str> <ls_id> <mpls_sublayer_name> <mpls_sublayer_id> ]

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

interfaces

Interfaces

detail

Detail

__readonly__

(Optional)

TABLE_mpls_interface_det

(Optional)

intf

(Optional)

client_name

(Optional)

oper_str

(Optional)

ls_id

(Optional)

mpls_sublayer_name

(Optional)

mpls_sublayer_id

(Optional)

Command Mode

  • /exec

show mpls interfaces statistics

show mpls interfaces <ifname> statistics [ __readonly__ TABLE_mpls_interface_stats <intf> <enabled> [ <pkts_in> ] [ <bytes_in> ] [ <pkts_out> ] [ <bytes_out> ] ]

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

interfaces

Interfaces

ifname

Interface Name

statistics

statistics

__readonly__

(Optional)

TABLE_mpls_interface_stats

(Optional)

intf

(Optional)

enabled

(Optional)

pkts_in

(Optional)

bytes_in

(Optional)

pkts_out

(Optional)

bytes_out

(Optional)

Command Mode

  • /exec

show mpls ip bindings

show mpls ip bindings [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ generic ] [ { <prefix> { <mask> | <mask-length> } | <prefix-mask> } [ longer-prefix ] ] [ neighbor <addr> | local ] [ [ local-label <local-label> [ local-to <local-label-max> ] ] | [ remote-label <remote-label> [ remote-to <remote-label-max> ] ] ] [ advertisement-prefix-list | detail ] [ __readonly__ { TABLE_bnd [ <ldp_ctx> ] [ <llaf> ] [ { TABLE_bnd_acl_list <oldstyle> <prefix_acl> <peer_acl> } ] [ { TABLE_bnd_rec <lib_addr> <lib_mask> [ <lcl_bnd_rev> ] [ <no_route> ] [ <chkpt> ] [ <local_label> ] [ <withdraw> ] [ { TABLE_bnd_peer_list <peer_ident> } ] [ { TABLE_bnd_remote [ <remote_lsr> ] [ <remote_label> ] [ <rem_lbl_in_use> ] [ <stale_gr> ] } ] [ <advert_acl_pending> ] [ <peer_acl> ] [ <prefix_acl> ] } ] } ]

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

ip

MPLS IP information

bindings

Show the MPLS IP Label Information Base (LIB)

vrf

(Optional) VRF Routing/Forwarding instance information

vrf-name

(Optional) VPN Routing/Forwarding instance name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display LIB information in all VRFs

generic

(Optional) Display generic labels

prefix

(Optional) Destination prefix

mask

(Optional) Destination prefix mask

mask-length

(Optional) Mask length

prefix-mask

(Optional) Destination prefix/mask

longer-prefix

(Optional) Include longer matches

neighbor

(Optional) Display labels from LDP neighbor

addr

(Optional) IP adjacency address

local

(Optional) Display only locally assigned labels

local-label

(Optional) Match locally assigned label values

local-label

(Optional) Locally assigned label value

local-to

(Optional) Label range

local-label-max

(Optional) Locally assigned label value

remote-label

(Optional) Match remotely assigned label values

remote-label

(Optional) Remotely assigned label value

remote-to

(Optional) Label range

remote-label-max

(Optional) Remotely assigned label value

advertisement-prefix-list

(Optional) Show advertisement prefix lists

detail

(Optional) Show detailed information

__readonly__

(Optional) Read Only

TABLE_bnd

(Optional) Show bindings or tib summary for a vrf

ldp_ctx

(Optional) LDP context

llaf

(Optional) Local label filtering spec

TABLE_bnd_acl_list

(Optional) Show advertisement access lists for default vrf

oldstyle

(Optional) Oldstyle assignment of prefix acls to entries

prefix_acl

(Optional) Prefix acl

peer_acl

(Optional) Peer acl

TABLE_bnd_rec

(Optional) Show bindings in a vrf

lib_addr

(Optional) LIB entry IP address

lib_mask

(Optional) LIB entry mask

lcl_bnd_rev

(Optional) Local binding revision for lib entry

no_route

(Optional) Displays if no route present for lib entry

chkpt

(Optional) Checkpoint state for lib entry

local_label

(Optional) Local label

withdraw

(Optional) Displays if label withdrawn or label withdraw sent

TABLE_bnd_remote

(Optional) Remote bindings

remote_lsr

(Optional) Remote binding label switched route for lib entry

remote_label

(Optional) Remote label for lib entry

rem_lbl_in_use

(Optional) Displays if out label is in use

stale_gr

(Optional) Displays if stale GR binding for lib entry

advert_acl_pending

(Optional) Displays if advert acl action pending for lib entry

peer_acl

(Optional) Advertisement acl: Peer acl name for lib entry

prefix_acl

(Optional) Advertisement acl: Prefix acl name for lib entry

TABLE_bnd_peer_list

(Optional) Show list of peers to which local label has been advertised

peer_ident

(Optional) Peer to which local label has been advertised

Command Mode

  • /exec

show mpls ip bindings summary

show mpls ip bindings summary [ __readonly__ { TABLE_bnd [ <total_prefixes> ] [ <assigned_bindings> ] [ <local_bindings> ] [ <rem_bindings> ] [ <total_rt_info> ] [ <current_prev_lbl_entries> ] [ <total_prev_lbl_entries> ] [ <current_prev_lbl_queues> ] [ <total_prev_lbl_queues> ] } ]

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

ip

MPLS IP information

bindings

Show the MPLS IP Label Information Base (LIB)

summary

Show summary information

__readonly__

(Optional) Read Only

TABLE_bnd

(Optional) Show bindings or tib summary for a vrf

total_prefixes

(Optional) Total number of prefixes

assigned_bindings

(Optional) Total number of assigned bindings

total_rt_info

(Optional) Total tib route info alloced

local_bindings

(Optional) Total number of locally assigned bindings

rem_bindings

(Optional) Total number of remote bindings

current_prev_lbl_entries

(Optional) Current number of previous tib remote label entries allocated

total_prev_lbl_entries

(Optional) Total number of previous tib remote label entries allocated

current_prev_lbl_queues

(Optional) Current number of previous tib remote label queues allocated

total_prev_lbl_queues

(Optional) Total number of previous tib remote label queues allocated

Command Mode

  • /exec

show mpls ip ttl

show mpls ip ttl [ __readonly__ TABLE_mpls_ip_ttl <prop_or_exp> [ <forwarded> ] [ <local> ] [ <exp_count> ] ]

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

ip

Display IP information

ttl

TTL related information

__readonly__

(Optional)

TABLE_mpls_ip_ttl

(Optional)

prop_or_exp

(Optional)

forwarded

(Optional)

local

(Optional)

exp_count

(Optional)

Command Mode

  • /exec

show mpls label range

show mpls label range [ __readonly__ <dynamic-min> <dynamic-max> [ <static-min> <static-max> ] [ <srgb-min> <srgb-max> ] ]

Syntax Description

show

Show running system information

mpls

MPLS configuration commands

label

Label properties

range

Label range

__readonly__

(Optional)

dynamic-min

(Optional)

dynamic-max

(Optional)

static-min

(Optional)

static-max

(Optional)

srgb-min

(Optional)

srgb-max

(Optional)

Command Mode

  • /exec

show mpls load-sharing

show mpls load-sharing [ __readonly__ TABLE_mpls_load_sharing [ <label-ip> ] [ <label-only> ] ]

Syntax Description

show

Show running system information

mpls

MPLS information

load-sharing

Show mpls load sharing options

__readonly__

(Optional)

TABLE_mpls_load_sharing

(Optional) Table for MPLS Load Sharing

label-ip

(Optional) Label IP load sharing

label-only

(Optional) Label only load sharing

Command Mode

  • /exec

show mpls oam echo statistics

show mpls oam echo statistics [ summary ] [ __readonly__ <rq_sent> <rq_timeout> <rq_unsent> <rq_rcvd> <rx_sent> <rx_unsent> <rx_rcvd> <rc_zero> <rc_one> <rc_two> <rc_three> <rc_four> <rc_five> <rc_six> <rc_seven> <rc_eight> <rc_nine> <rc_ten> <rc_eleven> <rc_twelve> <rc_thirteen> <rc_fourteen> <summary_flag> ]

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

oam

Display OAM information

echo

Echo request information

statistics

Detailed Echo packet statistics

summary

(Optional) Echo packet statistics summary

__readonly__

(Optional)

rq_sent

(Optional) Requests sent

rq_timeout

(Optional) Requests timeout

rq_unsent

(Optional) Requests unsent

rq_rcvd

(Optional) Requests received

rx_sent

(Optional) Replies sent

rx_unsent

(Optional) Replies unsent

rx_rcvd

(Optional) Replies received

rc_zero

(Optional) Return code zero

rc_one

(Optional) Return code one

rc_two

(Optional) Return code two

rc_three

(Optional) Return code three

rc_four

(Optional) Return code four

rc_five

(Optional) Return code five

rc_six

(Optional) Return code six

rc_seven

(Optional) Return code seven

rc_eight

(Optional) Return code eight

rc_nine

(Optional) Return code nine

rc_ten

(Optional) Return code ten

rc_eleven

(Optional) Return code eleven

rc_twelve

(Optional) Return code twelve

rc_thirteen

(Optional) Return code thirteen

rc_fourteen

(Optional) Return code fourteen

summary_flag

(Optional) Summary flag

Command Mode

  • /exec

show mpls static binding

show mpls static binding [ vrf { <vrf-name> | <vrf-known-name> } ] { { ipv4 [ <prefix> { <mask> | <mask-length> } | <prefix-mask> ] [ local | remote ] [ nexthop <addr> ] [ inconsistency ] [ lsp <slb_name> ] } | { ipv6 [ <ipv6-prefix> ] [ local | remote ] [ ipv6-nexthop <ipv6-addr> ] [ inconsistency ] } | all [ inconsistency ] } [ __readonly__ [ TABLE_slb [ <slb_name> ] [ <slb_prefix> ] [ <slb_mask> ] <slb_vrf> <slb_inlabel> [ <slb_type> ] [ TABLE_slb_outlbl_list [ <slb_nh_path_num> ] <slb_nhop> <slb_outlabel> ] [ <inconsistency_reason> ] ] ]

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

static

Show MPLS static information

binding

Show static label bindings

ipv4

Show ipv4 static label bindings

ipv6

Show ipv6 static label bindings

all

Show all static label bindings

vrf

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

local

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

remote

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

inconsistency

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

prefix

(Optional) Destination ipv4 prefix

mask

(Optional) Destination ipv4 prefix mask

mask-length

(Optional) Ipv4 mask length

prefix-mask

(Optional) Destination prefix/mask

nexthop

(Optional) Ipv4 next hop address

addr

(Optional) Ipv4 Next hop address

ipv6-nexthop

(Optional) Ipv6 next hop address

lsp

(Optional) LSP Name

__readonly__

(Optional) Read Only

TABLE_slb

(Optional) Show static label bindings for a given prefix

slb_name

(Optional) Name

slb_prefix

(Optional) Prefix

slb_type

(Optional) SLB Type

slb_mask

(Optional) Mask bits

slb_vrf

(Optional) VRF name for prefix

slb_inlabel

(Optional) Incoming label for prefix

TABLE_slb_outlbl_list

(Optional) Show static outgoing labels for prefix

slb_nhop

(Optional) Next-hop address

slb_nh_path_num

(Optional) Identifier for outgoing nexthop

slb_outlabel

(Optional) Outgoing label for next-hop address

inconsistency_reason

(Optional) Reason for inconsistency

Command Mode

  • /exec

show mpls strip labels

show mpls strip labels [ all | static | dynamic | <label_val> ] [ __readonly__ <disp_summary> [ TABLE_labels <disp_label> <disp_age> <disp_interface> <disp_pkt_cnt> <disp_stats> <disp_static> ] ]

Syntax Description

show

Show running system information

mpls

MPLS information

strip

Stripping of MPLS headers

labels

labels added in the system

all

(Optional) all labels [default]

static

(Optional) labels programmed using cli

dynamic

(Optional) dynamically learned

label_val

(Optional) Label to show

__readonly__

(Optional) Read Only

disp_summary

(Optional) Summary

TABLE_labels

(Optional) MPLS Strip Labels Tables

disp_label

(Optional) Label

disp_age

(Optional) Age

disp_interface

(Optional) Interface

disp_pkt_cnt

(Optional) Packet Count

disp_stats

(Optional) Statistics

disp_static

(Optional) Static

Command Mode

  • /exec

show mpls switching

show mpls switching [ labels <label> [ <max-label> ] | interface <intf> | { <ip-addr> | <ipv4-prefix> } [ vrf { <vrf-name> | <vrf-known-name> | all } ] | <ipv6-prefix> [ vrf { <vrf-name> | <vrf-known-name> | all } ] | traffic-eng srpath [ <srte-path-id> ] | aggregate [ ipv4 | ipv6 ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] | { fec { ipv4_prefix [ vrf { <vrf-name> | <vrf-known-name> | all } ] | ipv6_prefix [ vrf { <vrf-name> | <vrf-known-name> | all } ] | deagg [ vrf { <vrf-name> | <vrf-known-name> | all | ias_vpnv4 | ias_vpnv6 } ] | per-bd <per-bd-vlan-id> } } | { summary } ] [ detail ] [ private ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ [ [ TABLE_vrf [ <vrf_name> ] [ [ TABLE_inlabel <in_label> [ [ { <out_label_stack> + } ] [ { <srte_path_id> | <ipv4_prefix> | <ipv6_prefix> } ] [ <out_interface> ] { <ipv4_next_hop> | <ipv6_next_hop> } [ <weight> ] ] [ <deagg_vrf> [ <deagg_af> ] ] [ { <tunnel_v4_mid_source> | <tunnel_v6_mid_source> } <tunnel_id> { <ext_v4_tunnel_id> | <ext_v6_tunnel_id> } <tunnel_instance> <tunnel_head> ] [ <nhlfe_p2p_flag> ] [ <nhlfe_frr_status> ] [ <nhlfe_stale_flag> ] [ <in_packets> <in_bytes> ] [ [ <out_label> + ] <out_packets> + <out_bytes> + ] [ { <tunnel_v4_mid_dest> | <tunnel_v6_mid_dest> } { <ipv4_next_hop> | <ipv6_next_hop> } ] [ <per_ce_table> <per_ce_nh_set_id> ] [ { <ias_v4_prefix> | <ias_v6_prefix> } <ias_rd> ] [ <fec_none_label> ] [ <per_bd_vlan_id> ] [ <table_name> ] ] [ TABLE_adj_sid_inlabel <adj_sid_in_label> <out_label> { <ipv4_addr> | <ipv6_addr> } <out_interface> { <adj_sid_ipv4_next_hop> | <adj_sid_ipv6_next_hop> } [ <in_packets> <in_bytes> ] [ [ <out_label> + ] <out_packets> + <out_bytes> + ] ] ] ] [ TABLE_block <blockid> <lbl_range> ] ] ]

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

switching

Display the MPLS label switching database

traffic-eng

(Optional) Show traffic-engineering related entries

srpath

(Optional) Show traffic-engineering segment-routing path entries

ip-addr

(Optional) Match destination address

ipv4-prefix

(Optional) Specify an IP prefix/mask

fec

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

private

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

labels

(Optional) Show a specific label-related information

label

(Optional) Low label value

max-label

(Optional) High label value

interface

(Optional) Match outgoing interface

aggregate

(Optional) Show aggregate-related information

intf

(Optional) Specify outgoing interface

summary

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

detail

(Optional) Detailed information

ipv4_prefix

(Optional) IPv4 prefix

ipv6_prefix

(Optional) IPv6 prefix

ipv4

(Optional) Display IPv4 information

ipv6

(Optional) Display IPv6 information

deagg

(Optional) De-aggregation

per-bd

(Optional) BD FEC

ias_vpnv4

(Optional) Display Inter-AS V4 information

ias_vpnv6

(Optional) Display Inter-AS V6 information

srte-path-id

(Optional) Traffic-engineering segment-routing path id

per-bd-vlan-id

(Optional) Per BD id

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf_name

(Optional)

TABLE_inlabel

(Optional)

in_label

(Optional)

out_label_stack

(Optional)

ipv4_prefix

(Optional)

tunnel_v4_mid_source

(Optional)

tunnel_v4_mid_dest

(Optional)

tunnel_id

(Optional)

ext_v4_tunnel_id

(Optional)

tunnel_instance

(Optional)

tunnel_head

(Optional)

deagg_vrf

(Optional)

deagg_af

(Optional)

out_interface

(Optional)

ipv4_next_hop

(Optional)

ipv6_next_hop

(Optional)

weight

(Optional)

nhlfe_frr_status

(Optional)

nhlfe_stale_flag

(Optional)

nhlfe_p2p_flag

(Optional)

table_name

(Optional)

in_packets

(Optional)

in_bytes

(Optional)

out_label

(Optional)

out_packets

(Optional)

out_bytes

(Optional)

per_ce_table

(Optional)

per_ce_nh_set_id

(Optional)

fec_none_label

(Optional)

ias_v4_prefix

(Optional)

ias_v6_prefix

(Optional)

ias_rd

(Optional)

srte_path_id

(Optional)

per_bd_vlan_id

(Optional)

TABLE_adj_sid_inlabel

(Optional)

adj_sid_in_label

(Optional)

out_label

(Optional)

ipv4_addr

(Optional)

out_interface

(Optional)

adj_sid_ipv4_next_hop

(Optional)

adj_sid_ipv6_next_hop

(Optional)

in_packets

(Optional)

in_bytes

(Optional)

out_packets

(Optional)

out_bytes

(Optional)

TABLE_block

(Optional)

blockid

(Optional)

lbl_range

(Optional)

Command Mode

  • /exec

show mpls switching clients

show mpls switching clients [ __readonly__ [ TABLE_client <pib-name> <pib-index> <pib-uuid> <pib-sap> <stale-time> <pib-flag> [ <stale-due> ] <reg-msg> <conv-msg> [ <inv-conv> ] <fec-msg> <fec-add> <ile-add> <fec-del> <ile-del> <last-xid> <fec-ack> ] ]

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

switching

Display the MPLS label switching database

clients

Display ULIB client components

__readonly__

(Optional)

TABLE_client

(Optional)

pib-name

(Optional) Name of the client(pib)

pib-index

(Optional) PIB Index

pib-uuid

(Optional) PIB UUID

pib-sap

(Optional) MTS SAP for the pib

stale-time

(Optional) Stale time

pib-flag

(Optional) Flags set by the pib

stale-due

(Optional) Stale timer due in

reg-msg

(Optional) Number of Registration Message

conv-msg

(Optional) Number of Converge Message

inv-conv

(Optional) Number of Invalid Convergence message

fec-msg

(Optional) Number of FEC messages

fec-add

(Optional) Number of FEC Add messages

ile-add

(Optional) Number of ILE Add messages

fec-del

(Optional) Number of FEC delete messages

ile-del

(Optional) Number of ILE delete messages

last-xid

(Optional) Last XID

fec-ack

(Optional) Number of FEC Ack messages sent

Command Mode

  • /exec

show mvpn bgp mdt

show mvpn bgp { mdt-safi | auto-discovery } [ mdt-source <src-addr> ] [ __readonly__ { TABLE_entry <bgp_rd> <mdt_src> <mdt_grp> <local> } ]

Syntax Description

show

Show running system information

mvpn

Display Multicast VPN information

bgp

Display BGP related information

mdt-safi

Display Auto-discovered BGP MDT-SAFI database

auto-discovery

Display Auto-discovered BGP MDT-SAFI database

mdt-source

(Optional) Source address of MVPN neighbor

src-addr

(Optional) Source Address

__readonly__

(Optional)

TABLE_entry

(Optional)

bgp_rd

(Optional)

mdt_src

(Optional)

mdt_grp

(Optional)

local

(Optional)

Command Mode

  • /exec

show mvpn bgp mdt

show mvpn bgp { mdt-safi | auto-discovery } [ mdt-source <src-addr> ] [ __readonly__ { TABLE_entry <bgp_rd> <mdt_src> <mdt_grp> <local> } ]

Syntax Description

show

Show running system information

mvpn

Display Multicast VPN information

bgp

Display BGP related information

mdt-safi

Display Auto-discovered BGP MDT-SAFI database

auto-discovery

Display Auto-discovered BGP MDT-SAFI database

mdt-source

(Optional) Source address of MVPN neighbor

__readonly__

(Optional)

TABLE_entry

(Optional)

bgp_rd

(Optional)

local

(Optional)

Command Mode

  • /exec

show mvpn mdt encap

show mvpn mdt encap [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_vrf <out_context> { TABLE_encap <encap_index> <mdt_grp> <mdt_src> <mdt_src_if> } ]

Syntax Description

show

Show running system information

mvpn

Display Multicast VPN information

mdt

Display MDT information

encap

Display MDT Encap table

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_vrf

(Optional)

out_context

(Optional)

TABLE_encap

(Optional)

encap_index

(Optional)

mdt_src_if

(Optional)

Command Mode

  • /exec

show mvpn mdt encap

show mvpn mdt encap [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_vrf <out_context> { TABLE_encap <encap_index> <mdt_grp> <mdt_src> <mdt_src_if> } ]

Syntax Description

show

Show running system information

mvpn

Display Multicast VPN information

mdt

Display MDT information

encap

Display MDT Encap table

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_vrf

(Optional)

out_context

(Optional)

TABLE_encap

(Optional)

encap_index

(Optional)

mdt_grp

(Optional)

mdt_src

(Optional)

mdt_src_if

(Optional)

Command Mode

  • /exec

show mvpn mdt route

show mvpn mdt route [ detail ] [ __readonly__ TABLE_vrf <out_context> [ TABLE_mroute <src_addr> <grp_addr> <uptime> <ref_count> ] ]

Syntax Description

show

Show running system information

mvpn

Display Multicast VPN information

mdt

Display MDT information

route

Display MDT route information

detail

(Optional) Display detailed information

__readonly__

(Optional)

TABLE_vrf

(Optional)

out_context

(Optional)

TABLE_mroute

(Optional)

src_addr

(Optional)

grp_addr

(Optional)

uptime

(Optional)

ref_count

(Optional)

Command Mode

  • /exec

show mvpn mdt route

show mvpn mdt route [ detail ] [ __readonly__ TABLE_vrf <out_context> [ TABLE_mroute <src_addr> <grp_addr> <uptime> <ref_count> [ <route_type> ] [ <group_mode> ] [ <route_flags> ] ] ]

Syntax Description

show

Show running system information

mvpn

Display Multicast VPN information

mdt

Display MDT information

route

Display MDT route information

detail

(Optional) Display detailed information

__readonly__

(Optional)

TABLE_vrf

(Optional)

out_context

(Optional)

TABLE_mroute

(Optional)

src_addr

(Optional)

grp_addr

(Optional)

uptime

(Optional)

ref_count

(Optional)

route_type

(Optional)

group_mode

(Optional)

route_flags

(Optional)

Command Mode

  • /exec

show mvr

show mvr [ verbose ] [ __readonly__ <mvr-status> <mvr-default-vlan> <number-of-mvr-vlans> [ <mvr-group-list> <cfg-nodes> <interface-cfg-nodes> ] ]

Syntax Description

show

Show running system information

mvr

show mvr info

verbose

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

__readonly__

(Optional)

mvr-status

(Optional)

mvr-default-vlan

(Optional)

number-of-mvr-vlans

(Optional)

mvr-group-list

(Optional)

cfg-nodes

(Optional)

interface-cfg-nodes

(Optional)

Command Mode

  • /exec

show mvr groups

show mvr groups [ __readonly__ [ TABLE_group_list <ip-address> <ip-max-addr> <rn-count-char> <rn-count> <mvr-vlan-string> <if-name> ] [ [ <interface-name> ] [ <mvr-vlan> ] [ TABLE_mvr_vlan <global-mvr-vlan> ] <mvr-groups> <mvr-receiver-type> <mvr-source-type> ] ]

Syntax Description

show

Show running system information

mvr

show mvr info

groups

show mvr groups config

__readonly__

(Optional)

TABLE_group_list

(Optional)

ip-address

(Optional)

ip-max-addr

(Optional)

rn-count-char

(Optional)

rn-count

(Optional)

mvr-vlan-string

(Optional)

if-name

(Optional)

interface-name

(Optional)

mvr-vlan

(Optional)

TABLE_mvr_vlan

(Optional)

global-mvr-vlan

(Optional)

mvr-groups

(Optional)

mvr-receiver-type

(Optional)

mvr-source-type

(Optional)

Command Mode

  • /exec

show mvr interface

show mvr interface [ <if0> ] [ __readonly__ [ TABLE_if_name <interface-name> <access-vlan> <src-rcvr> <igmp-mvr-port-status> <mvr-vlan-str> ] ]

Syntax Description

show

Show running system information

mvr

show mvr info

interface

show mvr interfaces

if0

(Optional) Interface name

__readonly__

(Optional)

TABLE_if_name

(Optional)

interface-name

(Optional)

access-vlan

(Optional)

src-rcvr

(Optional)

igmp-mvr-port-status

(Optional)

mvr-vlan-str

(Optional)

Command Mode

  • /exec

show mvr members

show mvr members [ interface <if0> ] [ __readonly__ [ TABLE_mvr_vlan <mvr-vlan> <group> <status> [ TABLE_members_if <if-name> ] ] [ <vlan> <mvr-group> ] ]

Syntax Description

show

Show running system information

mvr

show mvr info

members

show active mvr groups

interface

(Optional) show active mvr groups config on interface

if0

(Optional) Interface name

__readonly__

(Optional)

TABLE_mvr_vlan

(Optional)

mvr-vlan

(Optional)

group

(Optional)

status

(Optional)

TABLE_members_if

(Optional)

if-name

(Optional)

vlan

(Optional)

mvr-group

(Optional)

Command Mode

  • /exec

show mvr members count

show mvr members count [ __readonly__ [ TABLE_mvr_vlan <mvr-vlan> <mvr-members-count> ] ]

Syntax Description

show

Show running system information

mvr

show mvr info

members

show active mvr groups

count

Active mvr groups on each mvr-vlan

__readonly__

(Optional)

TABLE_mvr_vlan

(Optional)

mvr-vlan

(Optional)

mvr-members-count

(Optional)

Command Mode

  • /exec

show mvr members vlan

show mvr members { vlan <vlan-id> } [ __readonly__ [ TABLE_mvr_vlan <mvr-vlan> <grp> <stat> [ TABLE_interface_vlan <interface-name> ] ] ]

Syntax Description

show

Show running system information

mvr

show mvr info

members

show active mvr groups

vlan

vlan

vlan-id

Enter MVR Vlan

__readonly__

(Optional)

TABLE_mvr_vlan

(Optional)

mvr-vlan

(Optional)

grp

(Optional)

stat

(Optional)

TABLE_interface_vlan

(Optional)

interface-name

(Optional)

Command Mode

  • /exec

show mvr receiver-ports

show mvr receiver-ports [ <if0> ] [ __readonly__ [ TABLE_mvr_if_name <mvr-if-name> <mvr-vlan-str> <igmp-port-status> <rx_reports> <rx_leaves> ] ]

Syntax Description

show

Show running system information

mvr

show mvr info

receiver-ports

List MVR receiver ports

if0

(Optional) Interface name

__readonly__

(Optional)

TABLE_mvr_if_name

(Optional)

mvr-if-name

(Optional)

mvr-vlan-str

(Optional)

igmp-port-status

(Optional)

rx_reports

(Optional)

rx_leaves

(Optional)

Command Mode

  • /exec

show mvr source-ports

show mvr source-ports [ <if0> ] [ __readonly__ [ TABLE_mvr_if_name <mvr-if-name> <interface-name> <igmp-port-status> ] ]

Syntax Description

show

Show running system information

mvr

show mvr info

source-ports

List MVR source ports

if0

(Optional) Interface name

__readonly__

(Optional)

TABLE_mvr_if_name

(Optional)

mvr-if-name

(Optional)

interface-name

(Optional)

igmp-port-status

(Optional)

Command Mode

  • /exec