S Show Commands

show san-port-channel compatibility-parameters

show san-port-channel compatibility-parameters [ __readonly__ [ { TABLE_compatibility_params <parameter> <description> } ] ]

Syntax Description

show

Show running system information

san-port-channel

Show san-port-channel information

compatibility-parameters

Show san-port-channel compatibility-parameters

__readonly__

(Optional) Read Only

TABLE_compatibility_params

(Optional) Table with compatibility params

parameter

(Optional) Compatibity parameter

description

(Optional) Parameter description

Command Mode

  • /exec

show san-port-channel consistency

show san-port-channel consistency [ __readonly__ [ <msg> ] [ { [ <error_msg> ] [ <consistency_state> ] [ <module> ] [ { TABLE_inconsistent_database [ <database> ] [ { [ <total_port_channels> ] [ { TABLE_san_port_channel_database [ <interface> ] [ <total_ports> ] [ <first_operational_port> ] [ { TABLE_san_port_channel_member <port> <state> } ] [ <db_error_str> ] } ] } ] } ] } ] ]

Syntax Description

show

Show running system information

san-port-channel

Show san-port-channel information

consistency

Show san-port-channel distributed database consistency

__readonly__

(Optional) Read Only

msg

(Optional) Message string

error_msg

(Optional) Prints consistency errors, if any

consistency_state

(Optional) Consistency state

module

(Optional) Module no

TABLE_inconsistent_database

(Optional) Table with details of inconsistent dbs

database

(Optional) Inconsistent database

TABLE_san_port_channel_database

(Optional) san-po Table

total_port_channels

(Optional) Total port channels

interface

(Optional) san-port-channel interface

first_operational_port

(Optional) First oper port in san-po

total_ports

(Optional) Total number of ports in the san-po

TABLE_san_port_channel_member

(Optional) san-po member Table

port

(Optional) san-po member port

state

(Optional) san-po member port state

db_error_str

(Optional) prints cmd errors, if any

Command Mode

  • /exec

show san-port-channel consistency detail

show san-port-channel consistency detail [ __readonly__ [ <sup_total_port_channels> ] [ { [ <sup_db_error_str> ] [ { TABLE_sup_san_port_channel_database <sup_interface> [ <sup_total_ports> ] [ <sup_first_operational_port> ] [ { TABLE_sup_san_port_channel_member <sup_port> <sup_state> } ] } ] } ] [ <msg> ] [ { [ <error_msg> ] [ <db_index> ] [ <module> ] [ { [ <total_port_channels> ] [ { TABLE_san_port_channel_database [ <interface> ] [ <total_ports> ] [ <first_operational_port> ] [ { TABLE_san_port_channel_member <port> <state> } ] [ <db_error_str> ] } ] } ] } ] [ <consistency_state> ] ]

Syntax Description

show

Show running system information

san-port-channel

Show san-port-channel information

consistency

Show san-port-channel distributed database consistency

detail

Show san-port-channel distributed databases of all modules

__readonly__

(Optional) Read Only

sup_total_port_channels

(Optional) Authoritative po db - Total POs

TABLE_sup_san_port_channel_database

(Optional) Table with details of auth po db

sup_interface

(Optional) san-port-channel interface

sup_first_operational_port

(Optional) First oper port in san-po

sup_total_ports

(Optional) Total number of ports in the san-po

TABLE_sup_san_port_channel_member

(Optional) san-po member Table

sup_port

(Optional) san-po member port

sup_state

(Optional) san-po member port state

sup_db_error_str

(Optional) prints cmd errors, if any

msg

(Optional) Msg string

error_msg

(Optional) Prints errors, if any

db_index

(Optional) Database index

module

(Optional) Module no

total_port_channels

(Optional) Authoritative po db - Total POs

TABLE_san_port_channel_database

(Optional) Table with details of auth po db

interface

(Optional) san-port-channel interface

first_operational_port

(Optional) First oper port in san-po

total_ports

(Optional) Total number of ports in the san-po

TABLE_san_port_channel_member

(Optional) san-po member Table

port

(Optional) san-po member port

state

(Optional) san-po member port state

db_error_str

(Optional) prints cmd errors, if any

consistency_state

(Optional) Consistency state

Command Mode

  • /exec

show san-port-channel database

show san-port-channel database [ interface <ifid> | all ] [ __readonly__ [ <error_str> ] [ { TABLE_san_port_channel_database <interface> <admin_chan_mode> <oper_chan_mode> <last_membership_update> [ <last_membership_update_fail_reason> ] [ <pcm_interface_flag> ] [ <vlan_interfaces> ] [ <first_operational_port> ] [ <total_ports> ] [ <total_oper_ports> ] [ { TABLE_san_port_channel_member <port> <state> } ] } ] [ <cmd_error_str> ] ]

Syntax Description

show

Show running system information

san-port-channel

Show san-port-channel information

database

Show san-port-channel database

interface

(Optional) Specify a port-channel

ifid

(Optional)

all

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

__readonly__

(Optional) Read Only

error_str

(Optional) Prints errors,if any

TABLE_san_port_channel_database

(Optional) san-port-channel database Table

interface

(Optional) san-po Interface

admin_chan_mode

(Optional) san-po administrative channel mode

oper_chan_mode

(Optional) san-po operational channel mode

last_membership_update

(Optional) Last membership update status

last_membership_update_fail_reason

(Optional) Membership update status casue

pcm_interface_flag

(Optional) san-po interface flag

vlan_interfaces

(Optional) san-po vlan interfaces

first_operational_port

(Optional) First oper port in san-po

total_ports

(Optional) Total number of ports in the san-po

total_oper_ports

(Optional) Total oper ports in the san-po

TABLE_san_port_channel_member

(Optional) san-po member Table

port

(Optional) san-po member port

state

(Optional) san-po member port state

cmd_error_str

(Optional) prints cmd errors,if any

Command Mode

  • /exec

show san-port-channel summary

show san-port-channel summary [ __readonly__ [ { TABLE_san_port_channel_summary <interface> <total_ports> <total_oper_ports> <first_operational_port> } ] [ <cmd_error_str> ] ]

Syntax Description

show

Show running system information

san-port-channel

Show san-port-channel information

summary

Show san-port-channel summary

__readonly__

(Optional) Read Only

TABLE_san_port_channel_summary

(Optional) san-port-channel Summary Table

interface

(Optional) san-po Interface

total_ports

(Optional) Total number of ports in the san-po

total_oper_ports

(Optional) Total oper ports in the san-po

first_operational_port

(Optional) First oper port in san-po

cmd_error_str

(Optional) Prints cmd error,if any

Command Mode

  • /exec

show san-port-channel usage

show san-port-channel usage [ __readonly__ [ <total_channel_numbers_used> { <used_range> } + { <unused_range> } + ] [ <error_str> ] ]

Syntax Description

show

Show running system information

san-port-channel

Show san-port-channel information

usage

Show san-port-channel usages

__readonly__

(Optional) Read Only

total_channel_numbers_used

(Optional) Total used number of port-channels

used_range

(Optional) Used range

unused_range

(Optional) Un-used range

error_str

(Optional) Prints error if any

Command Mode

  • /exec

show scheduler config

show scheduler config [ __readonly__ [ <terminal> ] [ <feature> ] [ <logfilesize> ] [ <emailfrom> ] [ <emailreplyto> ] [ <smtpserver> ] [ <port> ] [ <usevrf> ] [ { TABLE_userconfig <username> [ <password> ] } ] [ { TABLE_jobconfig <jobdata> } ] [ { TABLE_scheduleconfig <schedulename> [ <scheduletype> ] [ { TABLE_jobs <status> } ] [ <email> ] } ] ]

Syntax Description

show

Show running system information

scheduler

Show scheduler config or data

config

Display scheduler config

__readonly__

(Optional)

terminal

(Optional) logfile terminal

feature

(Optional) name service

logfilesize

(Optional) logfilesize

emailfrom

(Optional) emailfrom

emailreplyto

(Optional) emailreplyto

smtpserver

(Optional) smtpserver

port

(Optional) port

usevrf

(Optional) usevrf

TABLE_userconfig

(Optional) userconfig

username

(Optional) username

password

(Optional) password

TABLE_jobconfig

(Optional) job configs

jobdata

(Optional) jobdata

TABLE_scheduleconfig

(Optional) schedule configs

schedulename

(Optional) schedulename

scheduletype

(Optional) scheduletype

TABLE_jobs

(Optional) jobs

status

(Optional) status

email

(Optional) email

Command Mode

  • /exec

show scheduler job

show scheduler job [ name <s0> ] [ __readonly__ [ { TABLE_schedulerjobs <jobname> [ <jobdata> ] } ] ]

Syntax Description

show

Show running system information

scheduler

Show scheduler config or data

job

Display job information

name

(Optional) Specify the name of job

s0

(Optional) Specify the job name

__readonly__

(Optional)

TABLE_schedulerjobs

(Optional) schedulerjobs

jobname

(Optional) job name

jobdata

(Optional) job data

Command Mode

  • /exec

show scheduler logfile

show scheduler logfile [ __readonly__ [ { TABLE_joblog <jobname> [ <jobstatus> ] [ <schedulename> ] [ <scheduleusername> ] [ <completiontime> ] [ <joboutput> ] } ] ]

Syntax Description

show

Show running system information

scheduler

Show scheduler config or data

logfile

Display scheduler job output log

__readonly__

(Optional)

TABLE_joblog

(Optional) jobs log

jobname

(Optional) job name

jobstatus

(Optional) job status

schedulename

(Optional) schedulename

scheduleusername

(Optional) scheduleusername

completiontime

(Optional) completiontime

joboutput

(Optional) joboutput

Command Mode

  • /exec

show scheduler schedule

show scheduler schedule [ name <s0> ] [ __readonly__ [ { TABLE_schedules <schedulename> [ <scheduleusername> ] [ <scheduletype> ] [ <starttime> ] [ <lastexectime> ] [ <lastcompletiontime> ] [ <execcount> ] [ <jobcount> ] [ { TABLE_jobs <jobname> [ <execstatus> ] } ] } ] ]

Syntax Description

show

Show running system information

scheduler

Show scheduler config or data

schedule

Display schedule information

name

(Optional) Specify the name of schedule

s0

(Optional) Specify the schedule name

__readonly__

(Optional)

TABLE_schedules

(Optional) schedules

schedulename

(Optional) Schedule name

scheduleusername

(Optional) schedule username

scheduletype

(Optional) scheduletype

starttime

(Optional) starttime

lastexectime

(Optional) last exec time

lastcompletiontime

(Optional) lastcompletiontime

execcount

(Optional) execcount

jobcount

(Optional) jobcount

TABLE_jobs

(Optional) jobs

jobname

(Optional) jobname

execstatus

(Optional) execstatus

Command Mode

  • /exec

show segment-routing

show segment-routing [ detail ] [ __readonly__ <srvname> <state> <process_id> [ <srgb_min_label> <srgb_max_label> <srgb_alloc_status> [ <oper_srgb_min_label> <oper_srgb_max_label> ] <cleanup_intvl> <retry_intvl> [ <num_retries> ] [ <srgb_alloc_hdl> ] [ <cleanup_timer_state> <retry_timer_state> ] ] [ <ulib_reg_status> [ <ulib_pib_hdl> ] ] ]

Syntax Description

show

Show running system information

segment-routing

Show segment-routing status info

detail

(Optional) Show detailed information

__readonly__

(Optional)

srvname

(Optional) Service name

state

(Optional) Process state

process_id

(Optional) Process id

srgb_min_label

(Optional) Configured SRGB min label

srgb_max_label

(Optional) Configured SRGB max label

srgb_alloc_status

(Optional) SRGB allocation status

oper_srgb_min_label

(Optional) Operational SRGB min label

oper_srgb_max_label

(Optional) Operational SRGB max label

cleanup_intvl

(Optional) SRGB cleanup interval

retry_intvl

(Optional) SRGB alloc retry interval

num_retries

(Optional) SRGB alloc retries done

srgb_alloc_hdl

(Optional) SRGB alloc handle

cleanup_timer_state

(Optional) SRGB cleanup timer state

retry_timer_state

(Optional) SRGB retry timer state

ulib_reg_status

(Optional) ULIB registation done

ulib_pib_hdl

(Optional) ULIB PIB handle

Command Mode

  • /exec

show segment-routing clients

show segment-routing clients [ __readonly__ [ { TABLE_client <client_pib_name> <client_pib_index> <client_uuid> <client_pid> <client_sap> [ { TABLE_tib <vrf_name> <tib_name> [ <pfxsid_cleanup_status> ] } ] } ] <total_clients> ]

Syntax Description

show

Show running system information

segment-routing

Show segment-routing status info

clients

Show client info

__readonly__

(Optional)

TABLE_client

(Optional)

client_pib_name

(Optional) Client name

client_pib_index

(Optional) Client pib index

client_uuid

(Optional) Client UUID

client_pid

(Optional) Client PID

client_sap

(Optional) Client SAP

TABLE_tib

(Optional)

vrf_name

(Optional) VRF name

tib_name

(Optional) Table name

pfxsid_cleanup_status

(Optional) Prefixsid Cleanup Pending?

total_clients

(Optional) Total number of clients

Command Mode

  • /exec

show segment-routing ipv4 connected-prefix-sid-map

show segment-routing ipv4 connected-prefix-sid-map [ __readonly__ [ { TABLE_tib <vrf_name> <tib_name> [ { TABLE_pfxsid <prefix> <index> <absolute> <range> <valid> } ] } ] ]

Syntax Description

show

Show running system information

segment-routing

Show segment-routing status info

ipv4

Show info for IPv4 address-family

connected-prefix-sid-map

Show prefix-sid mapping

__readonly__

(Optional)

TABLE_tib

(Optional)

vrf_name

(Optional) Vrf name

tib_name

(Optional) Table name

TABLE_pfxsid

(Optional)

prefix

(Optional) Prefix

index

(Optional) Segment ID

absolute

(Optional) Segment ID is absolute?

range

(Optional) Range of Segment IDs from index

valid

(Optional) Segment ID is valid?

Command Mode

  • /exec

show segment-routing mpls

show segment-routing mpls [ detail ] [ __readonly__ <srvname> <state> <process_id> [ <srgb_min_label> <srgb_max_label> <srgb_alloc_status> [ <oper_srgb_min_label> <oper_srgb_max_label> ] <cleanup_intvl> <retry_intvl> [ <num_retries> ] [ <srgb_alloc_hdl> ] [ <cleanup_timer_state> <retry_timer_state> ] ] [ <ulib_reg_status> [ <ulib_pib_hdl> ] ] ]

Syntax Description

show

Show running system information

segment-routing

Show segment-routing status info

mpls

Show segment-routing mpls info

detail

(Optional) Show detailed information

__readonly__

(Optional)

srvname

(Optional) Service name

state

(Optional) Process state

process_id

(Optional) Process id

srgb_min_label

(Optional) Configured SRGB min label

srgb_max_label

(Optional) Configured SRGB max label

srgb_alloc_status

(Optional) SRGB allocation status

oper_srgb_min_label

(Optional) Operational SRGB min label

oper_srgb_max_label

(Optional) Operational SRGB max label

cleanup_intvl

(Optional) SRGB cleanup interval

retry_intvl

(Optional) SRGB alloc retry interval

num_retries

(Optional) SRGB alloc retries done

srgb_alloc_hdl

(Optional) SRGB alloc handle

cleanup_timer_state

(Optional) SRGB cleanup timer state

retry_timer_state

(Optional) SRGB retry timer state

ulib_reg_status

(Optional) ULIB registation done

ulib_pib_hdl

(Optional) ULIB PIB handle

Command Mode

  • /exec

show segment-routing mpls clients

show segment-routing mpls clients [ __readonly__ [ { TABLE_client <client_pib_name> <client_pib_index> <client_uuid> <client_pid> <client_sap> [ { TABLE_tib <vrf_name> <tib_name> [ <pfxsid_cleanup_status> ] } ] } ] <total_clients> ]

Syntax Description

show

Show running system information

segment-routing

Show segment-routing status info

mpls

Show segment-routing mpls info

clients

Show client info

__readonly__

(Optional)

TABLE_client

(Optional)

client_pib_name

(Optional) Client name

client_pib_index

(Optional) Client pib index

client_uuid

(Optional) Client UUID

client_pid

(Optional) Client PID

client_sap

(Optional) Client SAP

TABLE_tib

(Optional)

vrf_name

(Optional) VRF name

tib_name

(Optional) Table name

pfxsid_cleanup_status

(Optional) Prefixsid Cleanup Pending?

total_clients

(Optional) Total number of clients

Command Mode

  • /exec

show segment-routing mpls ipv4 connected-prefix-sid-map

show segment-routing mpls ipv4 connected-prefix-sid-map [ __readonly__ [ { TABLE_tib <vrf_name> <tib_name> [ { TABLE_pfxsid <prefix> <index> <absolute> <range> <valid> } ] } ] ]

Syntax Description

show

Show running system information

segment-routing

Show segment-routing status info

mpls

Show segment-routing mpls info

ipv4

Show info for IPv4 address-family

connected-prefix-sid-map

Show prefix-sid mapping

__readonly__

(Optional)

TABLE_tib

(Optional)

vrf_name

(Optional) Vrf name

tib_name

(Optional) Table name

TABLE_pfxsid

(Optional)

prefix

(Optional) Prefix

index

(Optional) Segment ID

absolute

(Optional) Segment ID is absolute?

range

(Optional) Range of Segment IDs from index

valid

(Optional) Segment ID is valid?

Command Mode

  • /exec

show sflow

show sflow [ __readonly__ <sampling-rate> <max-sampled-size> <counter-poll-interval> <max-datagram-size> <collector-vrf> <collector-ip> [ <source-ip> ] <collector-port> <agent-ip> [ <data-source-interface> + ] ]

Syntax Description

show

Show running system information

sflow

Display sFlow global configuration

__readonly__

(Optional) Read only

sampling-rate

(Optional) Sampling Rate

max-sampled-size

(Optional) Max Sampled Size

counter-poll-interval

(Optional) Counter Poll Interval

max-datagram-size

(Optional) Max Datagram Size

collector-vrf

(Optional) Collector VRF

collector-ip

(Optional) Collector IP

source-ip

(Optional) Source IP

collector-port

(Optional) Collector Port

agent-ip

(Optional) Agent IP

data-source-interface

(Optional) Data Source Interface

Command Mode

  • /exec

show sflow statistics

show sflow statistics [ __readonly__ <total-packets> <total-samples> <processed-samples> <dropped-samples> [ <rate-limiter-drops> ] [ <dropped-sflow-samples> ] <sent-datagrams> <dropped-datagrams> ]

Syntax Description

show

Show running system information

sflow

Display sFlow global configuration

statistics

Display sFlow statistics

__readonly__

(Optional) Read only

total-packets

(Optional) Total Packets

total-samples

(Optional) Total Samples

processed-samples

(Optional) Processed Samples

dropped-samples

(Optional) Dropped Samples

rate-limiter-drops

(Optional) Rate-Limiter Drops

dropped-sflow-samples

(Optional) Dropped sflow Samples

sent-datagrams

(Optional) Sent Datagrams

dropped-datagrams

(Optional) Dropped Datagrams

Command Mode

  • /exec

show snapshots

show snapshots [ __readonly__ TABLE_snapshot <snap_name> <snap_ctime> <description> ]

Syntax Description

show

Show running system information

snapshots

Snapshots present on the switch

__readonly__

(Optional)

TABLE_snapshot

(Optional)

snap_name

(Optional) snapshot name

snap_ctime

(Optional) snapshot create time

description

(Optional) snapshot description

Command Mode

  • /exec

show snapshots compare

show snapshots compare <snapshot-name-T1> <snapshot-name-T2> [ __readonly__ TABLE_feature <feat_name> [ <feat_state1> <feat_state2> ] [ TABLE_element <elemkey1> <elemval1> [ <elemkey2> <elemval2> ] [ <elemkey3> <elemval3> ] [ <elemkey4> <elemval4> ] [ <elemstate1> <elemstate2> ] [ TABLE_value <tag> <val1> <val2> ] [ TABLE_subrow <subrowkey> <subrowval> [ <substate1> <substate2> ] [ TABLE_subvalue <tag> <val1> <val2> ] ] ] ]

Syntax Description

show

Show running system information

snapshots

Snapshots present on the switch

compare

Compare two snapshots

snapshot-name-T1

Name of a snapshot taken at interval T1

snapshot-name-T2

Name of a snapshot taken at interval T2

__readonly__

(Optional)

TABLE_feature

(Optional)

feat_name

(Optional) feature name

feat_state1

(Optional) feature state in snapshot1

feat_state2

(Optional) feature state in snapehot2

TABLE_element

(Optional)

elemkey1

(Optional) element key1

elemval1

(Optional) element value1

elemkey2

(Optional) element key2

elemval2

(Optional) element value2

elemkey3

(Optional) element key3

elemval3

(Optional) element value3

elemkey4

(Optional) element key4

elemval4

(Optional) element value4

elemstate1

(Optional) element state in snapshot 1

elemstate2

(Optional) element state in snapshot 2

TABLE_value

(Optional)

tag

(Optional) element tag

val1

(Optional) element value for tag in snapshot1

val2

(Optional) element value for tag in snapshot2

TABLE_subrow

(Optional)

subrowkey

(Optional) subrow key

subrowval

(Optional) subrow value

substate1

(Optional) subrow state in snapshot 1

substate2

(Optional) subrow state in snapshot 2

TABLE_subvalue

(Optional)

tag

(Optional) subrow tag

val1

(Optional) subrow value for tag in snapshot1

val2

(Optional) subrow value for tag in snapshot2

Command Mode

  • /exec

show snapshots compare ipv4routes

show snapshots compare <snapshot-name-T1> <snapshot-name-T2> ipv4routes [ __readonly__ TABLE_summary <item_desc> <summary_val1> <summary_val2> [ <changed> ] [ TABLE_prefix <prefix> <missing_snapshot> ] ]

Syntax Description

show

Show running system information

snapshots

Snapshots present on the switch

compare

Comapre two snapshots

snapshot-name-T1

Name of a snapshot taken at interval T1

snapshot-name-T2

Name of a snapshot taken at interval T2

ipv4routes

Compare ipv4 route information

__readonly__

(Optional)

TABLE_summary

(Optional)

item_desc

(Optional) item description

summary_val1

(Optional) summary value in snapshot1

summary_val2

(Optional) summary value in snapehot2

changed

(Optional) changed flag

TABLE_prefix

(Optional)

prefix

(Optional) route prefix

missing_snapshot

(Optional) missing in snapshot name

Command Mode

  • /exec

show snapshots compare ipv6routes

show snapshots compare <snapshot-name-T1> <snapshot-name-T2> ipv6routes [ __readonly__ TABLE_summary <item_desc> <summary_val1> <summary_val2> [ <changed> ] [ TABLE_prefix <prefix> <missing_snapshot> ] ]

Syntax Description

show

Show running system information

snapshots

Snapshots present on the switch

compare

Comapre two snapshots

snapshot-name-T1

Name of a snapshot taken at interval T1

snapshot-name-T2

Name of a snapshot taken at interval T2

ipv6routes

Compare ipv6 route information

__readonly__

(Optional)

TABLE_summary

(Optional)

item_desc

(Optional) item description

summary_val1

(Optional) summary value in snapshot1

summary_val2

(Optional) summary value in snapehot2

changed

(Optional) changed flag

TABLE_prefix

(Optional)

prefix

(Optional) route prefix

missing_snapshot

(Optional) missing in snapshot name

Command Mode

  • /exec

show snapshots compare summary

show snapshots compare <snapshot-name-T1> <snapshot-name-T2> summary [ __readonly__ TABLE_summary <item_desc> <summary_val1> <summary_val2> [ <changed> ] ]

Syntax Description

show

Show running system information

snapshots

Snapshots present on the switch

compare

Comapre two snapshots

snapshot-name-T1

Name of a snapshot taken at interval T1

snapshot-name-T2

Name of a snapshot taken at interval T2

summary

Compare summary information

__readonly__

(Optional)

TABLE_summary

(Optional)

item_desc

(Optional) item description

summary_val1

(Optional) summary value in snapshot1

summary_val2

(Optional) summary value in snapehot2

changed

(Optional) changed flag

Command Mode

  • /exec

show snapshots dump

show snapshots dump <snapshot-name> <section-name> [ __readonly__ TABLE_snapshot <file_name> <snap_name> ]

Syntax Description

show

Show running system information

snapshots

Snapshots present on the switch

dump

Dump contents of snapshot

snapshot-name

Name of a snapshot

section-name

Name of snapshot section

__readonly__

(Optional)

TABLE_snapshot

(Optional)

file_name

(Optional) snapshot XML file name

snap_name

(Optional) snapshot name

Command Mode

  • /exec

show snapshots dump

show snapshots dump <snapshot-name> [ __readonly__ TABLE_snapshot <file_name> <snap_name> ]

Syntax Description

show

Show running system information

snapshots

Snapshots present on the switch

dump

Dump contents of snapshot

snapshot-name

Name of a snapshot

__readonly__

(Optional)

TABLE_snapshot

(Optional)

file_name

(Optional) snapshot XML file name

snap_name

(Optional) snapshot name

Command Mode

  • /exec

show snapshots sections

show snapshots sections [ __readonly__ TABLE_snapsection <sectname> <sectcmd> <sectrow> <sectkey1> <sectkey2> ]

Syntax Description

show

Show running system information

snapshots

Snapshots present on the switch

sections

User-specified snapshot sections

__readonly__

(Optional)

TABLE_snapsection

(Optional)

sectname

(Optional) snapshot section name

sectcmd

(Optional) snapshot section show command

sectrow

(Optional) snapshot section row id

sectkey1

(Optional) snapshot section key1

sectkey2

(Optional) snapshot section key2

Command Mode

  • /exec

show snmp

show snmp [ __readonly__ <sys_contact> <sys_location> <snmp_input_packets> <bad_snmp_version> <unknown_community_name> <illegal_community_name> <encoding_Err> <req_var_nums> <alt_var_nums> <get_req_in> <getnext_req_in> <set_req_in> <noname_pdu_in> <badval_pdu_in> <ro_pdu_in> <genral_err_in> <get_resp_in> <unknown_ctx> <snmp_output_packets> <trap_pdu> <toobig_err> <noname_pdu_out> <badval_pdu_out> <genral_err_out> <get_req_out> <getnext_req_out> <set_req_out> <get_resp_out> <silent_drops> [ <max_pkt_size> ] [ { TABLE_snmp_community <community_name> <grouporaccess> <context> <aclfilter> } ] [ { TABLE_snmp_users <user> <auth> <priv> [ { TABLE_groups <group> } ] [ <acl_filter> ] [ <engineID> ] } ] <tcp_auth_status> [ <port_mon_status> [ <policy_name> <pol_admin_status> <plo_oper_status> <pol_port_type> [ TABLE_policies <counter> <threshold> <interval> <rising_threshold> <rising_event> <falling_threshold> <falling_event> <pmon_config> ] ] ] [ <protocol_status> ] [ { TABLE_snmp_contexts <context_name> <proto_instanceid> <vrf> <topology> [ <vlan> | <MST> ] } ] ]

Syntax Description

show

Show running system information

snmp

show snmp information

__readonly__

(Optional) Read Only

TABLE_snmp_community

(Optional) Table that displays the community information

TABLE_snmp_users

(Optional) Table that displays the user information

TABLE_groups

(Optional) Table that displays the group information

TABLE_policies

(Optional) Table that displays the policy information

TABLE_snmp_contexts

(Optional) Table that displays the context information

sys_contact

(Optional) System Contact

sys_location

(Optional) System Location

snmp_input_packets

(Optional) SNMP input packets

bad_snmp_version

(Optional) bad snmp version in Input SNMP packets

unknown_community_name

(Optional) unknown community name in Input SNMP packets

illegal_community_name

(Optional) Illegal community name in Input SNMP packets

encoding_Err

(Optional) Encoding Errors in Input SNMP packets

req_var_nums

(Optional) number of requested variables

alt_var_nums

(Optional) number of altered variable

get_req_in

(Optional) GET request in Input SNMP packets

getnext_req_in

(Optional) GET-NEXT request in Input SNMP packets

set_req_in

(Optional) SET request in Input SNMP packets

noname_pdu_in

(Optional) NONAME PDU in Input SNMP packets

badval_pdu_in

(Optional) Bad value PDU in Input SNMP packets

ro_pdu_in

(Optional) Read only PDU in Input SNMP packets

genral_err_in

(Optional) Genral Error in Input SNMP packets

get_resp_in

(Optional) Get Response PDU in Input SNMP packets

unknown_ctx

(Optional) Unknown context Name in Input SNMP packets

snmp_output_packets

(Optional) SNMP Output Packets

trap_pdu

(Optional) Trap PDU in Output SNMP Packets

toobig_err

(Optional) Too Big errors in Output SNMP Packets

noname_pdu_out

(Optional)

badval_pdu_out

(Optional) NoName PDU in Output SNMP Packets

genral_err_out

(Optional) Genral Error in Output SNMP Packets

get_req_out

(Optional) GET request in Output SNMP Packets

getnext_req_out

(Optional) GET-NEXTrequest in Output SNMP Packets

set_req_out

(Optional) SET request in Output SNMP packets

get_resp_out

(Optional) Get Response PDU in Output SNMP Packets

silent_drops

(Optional) Silent Drop packets

max_pkt_size

(Optional) Maximum packet size

community_name

(Optional) community name

grouporaccess

(Optional) Group name

context

(Optional) contaxt Name

aclfilter

(Optional) Acl filter name

user

(Optional) User name

auth

(Optional) Auth type

priv

(Optional) Priv Type

group

(Optional) Group name

acl_filter

(Optional) acl filter

engineID

(Optional) engine id for the user

tcp_auth_status

(Optional) TCP authentication status

port_mon_status

(Optional) Port monitor status

policy_name

(Optional) policy name

pol_admin_status

(Optional) Policy Admin status

plo_oper_status

(Optional) Police oper status

pol_port_type

(Optional) policy port type

counter

(Optional) counters

threshold

(Optional) Threshold

interval

(Optional) Interval

rising_threshold

(Optional) Rising threshold

rising_event

(Optional) Rising Event

falling_threshold

(Optional) Falling threshold

falling_event

(Optional) Falling Event

pmon_config

(Optional) PMON configured

protocol_status

(Optional) Protocol Enable status

context_name

(Optional) context name

proto_instanceid

(Optional) Protocol instance ID

vrf

(Optional) VRF Name

topology

(Optional) Topology

vlan

(Optional) VLAN name

MST

(Optional) MST name

Command Mode

  • /exec

show snmp community

show snmp community [ __readonly__ { TABLE_snmp_community <community_name> <grouporaccess> <context> <aclfilter> } ]

Syntax Description

show

Show running system information

snmp

show snmp information

community

show snmp community strings

__readonly__

(Optional) Read Only

TABLE_snmp_community

(Optional) contains all snmp community names

community_name

(Optional) community name

grouporaccess

(Optional) group or access name

context

(Optional) context name

aclfilter

(Optional) acl filter name

Command Mode

  • /exec

show snmp context

show snmp context [ __readonly__ { TABLE_snmp_contexts <context_name> <proto_instanceid> <vrf> <topology> [ <vlan> | <MST> ] } ]

Syntax Description

show

Show running system information

snmp

show snmp information

context

show snmp context mapping entries

__readonly__

(Optional)

TABLE_snmp_contexts

(Optional) All SNMP Contexts Entries

context_name

(Optional) SNMP context Name

proto_instanceid

(Optional) Name of the protocol instance

vrf

(Optional) VRF name

topology

(Optional) Name of the Topology

vlan

(Optional) VLAN Name

MST

(Optional)

Command Mode

  • /exec

show snmp engineID

show snmp engineID [ __readonly__ <engineIDHex> <engineIDDec> ]

Syntax Description

show

Show running system information

snmp

show snmp information

engineID

show snmp engineID

__readonly__

(Optional)

engineIDHex

(Optional) SNMP engineID in HEX

engineIDDec

(Optional) SNMP engineID in Decimal

Command Mode

  • /exec

show snmp group

show snmp group [ __readonly__ { TABLE_role <role_name> <role_description> [ <attribute_scope> ] [ <permit_vsan> ] [ <permit_vlan> ] [ <permit_vlan_id> ] [ <permit_interface> ] [ <permit_interface_slot> ] [ <permit_vrf> ] [ TABLE_vrf<permit_vrf_name> ] [ { TABLE_rule [ <rule_num> ] [ <rule_action> ] { <rule_permission> | <rule_permission_mds> } [ <rule_featuretype> ] [ <rule_entity> ] } ] } ]

Syntax Description

show

Show running system information

snmp

show snmp information

group

show snmp group

__readonly__

(Optional) Read Only

TABLE_role

(Optional) Table displays role

role_name

(Optional) Role Name

role_description

(Optional) Role Description

attribute_scope

(Optional) Role scope

permit_vsan

(Optional) permitted vsan

permit_vlan

(Optional)

permit_vlan_id

(Optional)

permit_interface

(Optional)

permit_interface_slot

(Optional)

permit_vrf

(Optional)

TABLE_rule

(Optional)

rule_num

(Optional)

rule_action

(Optional)

rule_permission

(Optional)

rule_permission_mds

(Optional)

rule_featuretype

(Optional)

rule_entity

(Optional)

Command Mode

  • /exec

show snmp host

show snmp host [ __readonly__ { TABLE_host <host><port><version><level><type><secname> [ [ <vrf> ] [ TABLE_vrf_filters <vrf_filter> ] [ <src_intf> ] ] } ]

Syntax Description

show

Show running system information

snmp

show snmp information

host

show snmp hosts

__readonly__

(Optional) Read Only

TABLE_host

(Optional) displays the list of hosts configured for snmp requests

TABLE_vrf_filters

(Optional) displays the host vrf filters

vrf

(Optional) VRF Name

vrf_filter

(Optional) vrf filters

src_intf

(Optional) source interface

Command Mode

  • /exec

show snmp nms-statistics

show snmp nms-statistics [ __readonly__ <header> [ <nms_stats> ] ]

Syntax Description

show

Show running system information

snmp

Show snmp information

nms-statistics

Show SNMP NMS statistics

__readonly__

(Optional) Read Only

header

(Optional) NMS Statistics header

nms_stats

(Optional) NMS Statistics

Command Mode

  • /exec

show snmp oid-statistics

show snmp oid-statistics [ last-access ] [ __readonly__ <header> { TABLE_snmp_gen <oid_stats> | TABLE_snmp_la <oid_last_access_stats> } ]

Syntax Description

show

Show running system information

snmp

Show snmp information

oid-statistics

Show SNMP oid statistics

last-access

(Optional) Show SNMP oid statistics of last-access

__readonly__

(Optional) Read Only

header

(Optional) OID Statistics header

TABLE_snmp_gen

(Optional) contains all snmp oid statistics

oid_stats

(Optional) OID Statistics

TABLE_snmp_la

(Optional) contains all snmp oid last access statistics

oid_last_access_stats

(Optional) OID Last Access Statistics

Command Mode

  • /exec

show snmp sessions

show snmp sessions [ __readonly__ { TABLE_session <dest> } ]

Syntax Description

show

Show running system information

snmp

show snmp information

sessions

show snmp sessions

__readonly__

(Optional) Read Only

TABLE_session

(Optional) table displays destination

dest

(Optional) destination

Command Mode

  • /exec

show snmp source-interface

show snmp source-interface [ __readonly__ { <trap_srcintf> <informs_srcintf> } ]

Syntax Description

show

Show running system information

snmp

show snmp information

source-interface

show source-interface through which notifications are sent

__readonly__

(Optional) Read Only

trap_srcintf

(Optional) Displays the source interface for traps

informs_srcintf

(Optional) Displays the source interface for informs

Command Mode

  • /exec

show snmp trap

show snmp trap [ __readonly__ { TABLE_snmp_trap <trap_type><description><isEnabled> } ]

Syntax Description

show

Show running system information

snmp

show snmp information

trap

show snmp traps

__readonly__

(Optional) Read Only

TABLE_snmp_trap

(Optional) All snmp traps configured

Command Mode

  • /exec

show snmp user

show snmp user [ <s0> [ engineID <s1> ] ] [ __readonly__ [ { TABLE_snmp_users <user> <auth> <priv> [ <group> ] + [ <acl_filter> ] [ <engineID> ] } ] ]

Syntax Description

show

Show running system information

snmp

show snmp information

user

show SNMPv3 users

s0

(Optional) Name of the user

engineID

(Optional) engineID

s1

(Optional) Target's SNMP engineID(colon separated) for SNMPv3 inform

__readonly__

(Optional) Read Only

TABLE_snmp_users

(Optional) table displays the snmp users

user

(Optional) user name

auth

(Optional) auth type

priv

(Optional) priv type

group

(Optional) group belongs to

acl_filter

(Optional) acl filter

engineID

(Optional) engineID for specific user

Command Mode

  • /exec

show sockets client

show sockets client { [ pid <pid> ] [ tcp | udp | raw ] [ detail ] [ kstack-ns-all ] } [ __readonly__ [ TABLE_total_clients [ <socket-type> <total-clients> ] [ <no-total-clients> ] ] [ TABLE_cl_sk { <prefix> <client-name> <pid> <No-of-clients> } [ <fast-tcp-mts-ctrl-q> ] [ { <cancel-requests> <cancel-unblocks> <cancel-misses> <select-drops> <select-wakes> } ] [ TABLE_det [ { <fd> <client-id> [ <mts-sap> ] } ] ] [ TABLE_st [ <soc-calls> ] [ <bind-calls> ] [ <listen-calls> ] [ <accept-calls> ] [ <acc-dispat-err> ] [ <connect-calls> ] [ <connec-dispatch> ] [ <recvmsg-dispatch> ] [ <recv-dis-nblock> ] [ <recvmsg-call> ] [ <brecv-dispatch> ] [ <fsendmsg-calls> ] [ <sendmsg-dispatch> ] [ <sendmsg-calls> ] [ <msendmsg-calls> ] [ <select-calls> ] [ <select-dispatch> ] [ <select-need-work> ] [ <sh-calls> ] [ <close-calls> ] [ <fcntl-calls> ] [ <ioctl-calls> ] [ <setsock-calls> ] [ <getsock-calls> ] [ <getsockname-calls> ] [ <getpeer-calls> ] [ <fork-calls> ] [ <execve-calls> ] [ <dup-calls> ] [ <can-calls> ] [ <can-miss> ] [ <can-unblk-sele> ] [ <soc-ha-calls> ] [ <pfork-client> ] [ <read-fd> ] [ <write-fd> ] [ <read-fd-set> ] [ <write-fd-set> ] [ <fast-tcp-send-req> ] [ <fast-tcp-send-suc> ] [ <fast-tcp-ack> ] ] [ TABLE_sterr [ <sock-err> ] [ <sock-nodev-err> ] [ <bind-err> ] [ <lis-err> ] [ <accept-err> ] [ <connect-err> ] [ <recvmsg-err> ] [ <brcvmsg-err> ] [ <fsendmsg-err> ] [ <sendmsg-err> ] [ <msndmsg-err> ] [ <select-err> ] [ <sel-nomem-err> ] [ <shut-err> ] [ <close-err> ] [ <fcntl-err> ] [ <ioctl-err> ] [ <setsoc-err> ] [ <getsoc-err> ] [ <getsocname-err> ] [ <getpeername-err> ] [ <fork-err> ] [ <execve-err> ] [ <dup-err> ] [ <psoc-vrf-err> ] [ <psoc-nosoc-err> ] [ <psoc-sock-null-err> ] [ <psoc-socre-err> ] [ <pbind-nsock-err> ] [ <pbd-getsocaddr> ] [ <pbind-sobind-err> ] [ <plisten-nsoc-err> ] [ <plis-solis-err> ] [ <pacc-nsoc-err> ] [ <pacc-no-nsoc-err> ] [ <pacc-soc-null-err> ] [ <pacc-copy-err> ] [ <pacc-no-acc-err> ] [ <pacc-woublo-err> ] [ <pacc-connabo-err> ] [ <pacc-cond-wait-err> ] [ <pacc-so-err-err> ] [ <pacc-err-err> ] [ <pcon-no-soc-err> ] [ <pcon-ealready-err> ] [ <pconn-getsock> ] [ <pconn-socon-err> ] [ <pconn-einpro-err> ] [ <pconn-con-wait-err> ] [ <psend-no-soc-err> ] [ <psend-inval-iov> ] [ <psend-getsoc-err> ] [ <psend-msg-ctrl-err> ] [ <psend-sockarg-err> ] [ <psend-pru-sosend> ] [ <precv-nosock-err> ] [ <precv-inval-iovlen> ] [ <precv-pru-sorecv> ] [ <precv-cp-msg-err> ] [ <precv-cp-msg-nlen> ] [ <precv-cp-data-err> ] [ <pbrecv-rcvmsg-err> ] [ <pshut-no-soc-err> ] [ <psetsoc-val-err> ] [ <psetsoc-inv-val> ] [ <psetsoc-no-soc-err> ] [ <psetsoc-sosetopt> ] [ <pgetsoc-no-socerr> ] [ <pgetsoc-cp-err> ] [ <pgetsoc-val-err> ] [ <pgetsoc-sogt-err> ] [ <pgtsoc-no-soc-err> ] [ <pgtsoc-cp-err> ] [ <pgtsoc-pru-soc-err> ] [ <pgtsoc-cpout-err> ] [ <pgtprne-no-soc-err> ] [ <pgtprne-enot-err> ] [ <pgtprne-cp-err> ] [ <pgtprne-pru-pradd> ] [ <pgtprne-cpout-err> ] [ <pclose-no-soc-err> ] [ <pclose-socnull-err> ] [ <pclose-p-cls2-err> ] [ <pfcntl-no-soc-err> ] [ <pfcntl-soc-null> ] [ <pfcntl-enotsup> ] [ <pfcntl-einval-err> ] [ <pioctl-no-soc-err> ] [ <pioctl-enotsup> ] [ <pioctl-pru-cntl> ] [ <pfork-enomem-err> ] [ <pdup-no-soc-err> ] [ <pudp-soc-null-err> ] [ <ha-nomem-err> ] [ <ha-tlv-err> ] [ <ha-soc-arg-err> ] [ <ha-cli-tlv-err> ] [ <ha-pss-upd-err> ] [ <ha-no-soc-err> ] [ <ha-soc-tlv-err> ] [ <ha-soc-pss-upd> ] [ <ha-inpcb-tlv> ] [ <ha-inpcb-pssky> ] [ <ha-ip-mopt-tlv> ] [ <ha-ip-mopt-pss> ] [ <ha-ip6-mopt-tlv> ] [ <ha-ip6-mopt-pss> ] [ <ha-tcpcb-tlv> ] [ <ha-tcpcb-pss> ] [ <ft-tcp-wblock> ] [ <ft-send-p-sndmsg> ] [ <ft-ack-rcv-no-soc> ] [ <lxc-tgid-err> ] ] [ TABLE_sp_cl [ <can-requests> <can-unblocks> <can-misses> <sel-drops> <sel-wakes> ] ] ] ]

Syntax Description

show

Show running system information

sockets

Display sockets status and configuration

client

Display sockets client information

pid

(Optional) Display specific client process information

pid

(Optional) Display client process <pid>

tcp

(Optional) Display TCP clients

udp

(Optional) Display UDP clients

raw

(Optional) Display RAW clients

detail

(Optional) Display socket details

kstack-ns-all

(Optional) Show kernel clients for all namespaces

__readonly__

(Optional)

TABLE_total_clients

(Optional) Total no of client sockets

socket-type

(Optional) Sockets type

total-clients

(Optional) total clients

no-total-clients

(Optional) number of total clients

TABLE_cl_sk

(Optional) Display Client sockets

prefix

(Optional) Prefix to the sockets

client-name

(Optional) Display socket client info

pid

(Optional) Display client process <pid>

No-of-clients

(Optional) Number of socket clients

fast-tcp-mts-ctrl-q

(Optional) Fast tcp mts control queue

cancel-requests

(Optional) cancel requests

cancel-unblocks

(Optional) cancel unblocks

cancel-misses

(Optional) cancel misses

select-drops

(Optional) select drops

select-wakes

(Optional) select wakes

TABLE_det

(Optional) Display Socket client Details

fd

(Optional) Client socket fd

client-id

(Optional) Client socket id

mts-sap

(Optional) socket mts addr sap

TABLE_st

(Optional) Sock detail Ctrl statistics

soc-calls

(Optional) sockets calls

bind-calls

(Optional) socket bind calls

listen-calls

(Optional) socket listen calls

accept-calls

(Optional) socket accept calls

acc-dispat-err

(Optional) socket accept dispatch error

connect-calls

(Optional) socket connect calls

connec-dispatch

(Optional) socket dispatch calls

recvmsg-dispatch

(Optional) receive msg dispatch

recv-dis-nblock

(Optional) receive dispatch nonblock

recvmsg-call

(Optional) receive message call

brecv-dispatch

(Optional) broadcast receive dispatch

fsendmsg-calls

(Optional) forward send message dispatch

sendmsg-dispatch

(Optional) send message dispatch

sendmsg-calls

(Optional) send message calls

msendmsg-calls

(Optional) multicast send message calls

select-calls

(Optional) select calls

select-dispatch

(Optional) select dispatch

select-need-work

(Optional) select need work

sh-calls

(Optional) show calls

close-calls

(Optional) close calls

fcntl-calls

(Optional) fcntl calls

ioctl-calls

(Optional) ioctl calls

setsock-calls

(Optional) setsock calls

getsock-calls

(Optional) getsock calls

getsockname-calls

(Optional) get socket name calls

getpeer-calls

(Optional) get peer calls

fork-calls

(Optional) fork calls

execve-calls

(Optional) execve calls

dup-calls

(Optional) duplicate calls

can-calls

(Optional) cancel calls

can-miss

(Optional) cancel miss

can-unblk-sele

(Optional) cancel unblock select

soc-ha-calls

(Optional) socket ha calls

pfork-client

(Optional) pfork client

read-fd

(Optional) socket read fd

write-fd

(Optional) socket write fd

read-fd-set

(Optional) socket read fd set

write-fd-set

(Optional) socket write fd set

fast-tcp-send-req

(Optional) socket fast tcp send request

fast-tcp-send-suc

(Optional) socket fast tcp send success

fast-tcp-ack

(Optional) socket fast tcp ack

TABLE_sterr

(Optional) Client Socket Error Statistics

sock-err

(Optional) socket error

sock-nodev-err

(Optional) socket nodev error

bind-err

(Optional) socket bind error

lis-err

(Optional) socket listen error

accept-err

(Optional) socket accept error

connect-err

(Optional) socket connect error

recvmsg-err

(Optional) socket receive message error

brcvmsg-err

(Optional) socket broadcast receive message error

fsendmsg-err

(Optional) socket forward send message error

sendmsg-err

(Optional) socket send message error

msndmsg-err

(Optional) socket multicast send message error

select-err

(Optional) socket select error

sel-nomem-err

(Optional) socket select no member error

shut-err

(Optional) socket shutdown error

close-err

(Optional) socket close error

fcntl-err

(Optional) socket fcntl error

ioctl-err

(Optional) socket ioctl error

setsoc-err

(Optional) set socket error

getsoc-err

(Optional) get socket error

getsocname-err

(Optional) get socket name error

getpeername-err

(Optional) get peer name error

fork-err

(Optional) socket fork error

execve-err

(Optional) socket execve error

dup-err

(Optional) socket duplicate error

psoc-vrf-err

(Optional) psocket vrf error

psoc-nosoc-err

(Optional) psocket nosoc error

psoc-sock-null-err

(Optional) psocket socket null error

psoc-socre-err

(Optional) psocket socre error

pbind-nsock-err

(Optional) pbind nsock error

pbd-getsocaddr

(Optional) pbd getsocaddr

pbind-sobind-err

(Optional) pbind sobind error

plisten-nsoc-err

(Optional) plisten nsoc error

plis-solis-err

(Optional) plisten socket listen error

pacc-nsoc-err

(Optional) paccept new socket error

pacc-no-nsoc-err

(Optional) paccept no new socket error

pacc-soc-null-err

(Optional) paccept socket null error

pacc-copy-err

(Optional) paccept copy error

pacc-no-acc-err

(Optional) paccept no accept error

pacc-woublo-err

(Optional) paccept would block error

pacc-connabo-err

(Optional) paccept connect abort error

pacc-cond-wait-err

(Optional) paccept condition wait error

pacc-so-err-err

(Optional) paccept socket error

pacc-err-err

(Optional) paccept error

pcon-no-soc-err

(Optional) pconnect no socket error

pcon-ealready-err

(Optional) pconnect ready error

pconn-getsock

(Optional) pconnect get socket

pconn-socon-err

(Optional) pconnect socket on error

pconn-einpro-err

(Optional) pconnect einprogress error

pconn-con-wait-err

(Optional) pconnect condition wait error

psend-no-soc-err

(Optional) psend no socket error

psend-inval-iov

(Optional) psend invalidate iov

psend-getsoc-err

(Optional) psend getsocket error

psend-msg-ctrl-err

(Optional) psend message control error

psend-sockarg-err

(Optional) psend socket argument error

psend-pru-sosend

(Optional) psend pru socket send

precv-nosock-err

(Optional) preceive no socket error

precv-inval-iovlen

(Optional) preceive invalidate iovlen

precv-pru-sorecv

(Optional) preceive pru so receive

precv-cp-msg-err

(Optional) preceive copy message error

precv-cp-msg-nlen

(Optional) preceive copy message new length

precv-cp-data-err

(Optional) preceive copy data error

pbrecv-rcvmsg-err

(Optional) preceive receive message error

pshut-no-soc-err

(Optional) pshutdown no socket error

psetsoc-val-err

(Optional) pset socket value error

psetsoc-inv-val

(Optional) pset socket invalidate error

psetsoc-no-soc-err

(Optional) pset socket no socket error

psetsoc-sosetopt

(Optional) pset socket set opt

pgetsoc-no-socerr

(Optional) pget socket no socket error

pgetsoc-cp-err

(Optional) pget socket copy error

pgetsoc-val-err

(Optional) pget socket validate error

pgetsoc-sogt-err

(Optional) pget socket sogt error

pgtsoc-no-soc-err

(Optional) pget socket no socket error

pgtsoc-cp-err

(Optional) pget socket copy error

pgtsoc-pru-soc-err

(Optional) pget socket pru socket error

pgtsoc-cpout-err

(Optional) pget socket copy out error

pgtprne-no-soc-err

(Optional) pget peer name no socket error

pgtprne-enot-err

(Optional) pget peer name enot connect error

pgtprne-cp-err

(Optional) pget peer name copy error

pgtprne-pru-pradd

(Optional) pget peer name pru peer address

pgtprne-cpout-err

(Optional) pget peer name copy out error

pclose-no-soc-err

(Optional) pclose no socket error

pclose-socnull-err

(Optional) pclose socket null error

pclose-p-cls2-err

(Optional) pclose p close2 error

pfcntl-no-soc-err

(Optional) pfcntl no socket error

pfcntl-soc-null

(Optional) pfcntl socket null

pfcntl-enotsup

(Optional) pfcntl enotsupport errors

pfcntl-einval-err

(Optional) pfcntl einvalidate error

pioctl-no-soc-err

(Optional) pioctl no socket error

pioctl-enotsup

(Optional) pioctl enotsup

pioctl-pru-cntl

(Optional) pioctl pru cntl

pfork-enomem-err

(Optional) pfork eno-memory error

pdup-no-soc-err

(Optional) pudp no socket error

pudp-soc-null-err

(Optional) pudp socket null error

ha-nomem-err

(Optional) ha no memory error

ha-tlv-err

(Optional) ha tlv error

ha-soc-arg-err

(Optional) ha socket argument error

ha-cli-tlv-err

(Optional) ha cli tlv error

ha-pss-upd-err

(Optional) ha pss udp error

ha-no-soc-err

(Optional) ha no socket error

ha-soc-tlv-err

(Optional) ha socket tlv error

ha-soc-pss-upd

(Optional) ha socket pss udp

ha-inpcb-tlv

(Optional) ha inpcb tlv value

ha-inpcb-pssky

(Optional) ha inpcb pssky value

ha-ip-mopt-tlv

(Optional) ha ip mopt tlv value

ha-ip-mopt-pss

(Optional) ha ip mopt pss value

ha-ip6-mopt-tlv

(Optional) ha ip6 mopt tlv value

ha-ip6-mopt-pss

(Optional) ha ip6 mopt pss value

ha-tcpcb-tlv

(Optional) ha socket update tcpcb to tlv error

ha-tcpcb-pss

(Optional) ha socket update tcpcb psskey update error

ft-tcp-wblock

(Optional) fast tcp send would block error

ft-send-p-sndmsg

(Optional) fast tcp send p_sendmsg errors

ft-ack-rcv-no-soc

(Optional) fast ack receive no socket

lxc-tgid-err

(Optional) Containers tgid err

TABLE_sp_cl

(Optional) Sock specific Ctrl statistics

can-requests

(Optional) socket control cancel request

can-unblocks

(Optional) socket cancel unblocks

can-misses

(Optional) socket cancel misses

sel-drops

(Optional) select drops

sel-wakes

(Optional) select wakes

Command Mode

  • /exec

show sockets connection

show sockets connection [ pid <pid> | tcp | udp | raw ] [ local { <srcIP> | <srcIP6> } ] [ foreign { <dstIP> | <dstIP6> } ] [ detail ] [ keydetails ] [ __readonly__ [ { TABLE_sockets <protocol> [ <total-conn-count> ] [ { TABLE_conn <afi> [ <laddr> ] [ <lport> ] [ <faddr> ] [ <fport> ] [ <prot> ] [ <type> ] [ <ttl> ] [ <tos> ] [ <options> ] [ <state> ] [ <rcv-count> ] [ <rcv-hiwat> ] [ <rcv-lowat> ] [ <rcv-flags> ] [ <snd-count> ] [ <snd-hiwat> ] [ <snd-lowat> ] [ <snd-flags> ] [ <iss> ] [ <snd-una> ] [ <snd-nxt> ] [ <snd_wnd> ] [ <irs> ] [ <rcv-nxt> ] [ <rcv-wnd> ] [ <snd-cwnd> ] [ <ooo_pkt_recv> ] [ <ooo_pkt_drpd> ] [ <ooo_pkt_rqc> ] [ <srtt> ] [ <rtt> ] [ <rttvar> ] [ <krtt> ] [ <rttmin> ] [ <mss> ] [ <dur> ] [ <tcp-state> ] [ <flags> ] [ <md5-cnt> ] [ <md5-host> ] [ <md5-err> ] [ <tcp-count> ] [ <udp-count> ] [ <raw-count> ] [ <vrf-name> ] [ <intf> ] } ] } ] ]

Syntax Description

show

Show running system information

sockets

Display sockets status and configuration

connection

Display connection information

pid

(Optional) Display specific client process connection status

pid

(Optional) Display client process connection status <pid>

tcp

(Optional) Display all TCP connections

udp

(Optional) Display all UDP connections

raw

(Optional) Display all raw connections

local

(Optional) Display all TCP connections with specified local address

srcIP

(Optional) Display all TCP connections with specified local address

foreign

(Optional) Display all TCP connections with specified foreign address

dstIP

(Optional) Display all TCP connections with specified foreign address

detail

(Optional) Display detailed connection infomation

keydetails

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

__readonly__

(Optional)

TABLE_sockets

(Optional) sockets table

protocol

(Optional) socket protocol

total-conn-count

(Optional) socket connection table

TABLE_conn

(Optional)

afi

(Optional) socket family

prot

(Optional) socket protocol

tcp-state

(Optional) socket tcp state

rcv-count

(Optional) socket connection receive count

laddr

(Optional) socket conenction laddr

lport

(Optional) socket connection lport

faddr

(Optional) socket connection faddr

fport

(Optional) socket connection fport

intf

(Optional) socket connection interface

vrf-name

(Optional) socket vrf name

snd-count

(Optional) socket connection send count

type

(Optional) socket connection type

ttl

(Optional) socket connection ttl

tos

(Optional) socket connection tos

options

(Optional) socket connection option

state

(Optional) socket connection state

iss

(Optional) socket connection iss

snd-una

(Optional) socket connection send unavailable

snd-nxt

(Optional) socket connection send next

snd_wnd

(Optional) socket connection send window

irs

(Optional) socket connection irs

rcv-nxt

(Optional) socket connection receive next

rcv-wnd

(Optional) socket connection receive window

snd-cwnd

(Optional) socket connection close sent window

ooo_pkt_recv

(Optional) socket connection out-of-order packet received

ooo_pkt_drpd

(Optional) socket connection out-of-order packet dropped

ooo_pkt_rqc

(Optional) socket connection out-of-order reassembly queue count

srtt

(Optional) socket connection srtt

rtt

(Optional) socket connection rtt

rttvar

(Optional) socket connection rttvar

krtt

(Optional) socket connection krtt

rttmin

(Optional) socket connection rtt mintues

mss

(Optional) socket connection mss

dur

(Optional) socket connection duration

flags

(Optional) socket connection flags

md5-cnt

(Optional) socket connection md5 count

md5-host

(Optional) socket connection md5 host

md5-err

(Optional) socket connection md5 error

rcv-hiwat

(Optional) socket connection receive hiwat

rcv-lowat

(Optional) socket connection receive lowat

rcv-flags

(Optional) socket connection receive flags

snd-hiwat

(Optional) socket connection send hiwat

snd-lowat

(Optional) socket connection send lowat

snd-flags

(Optional) socket connection send flags

tcp-count

(Optional) socket connection tcp count

udp-count

(Optional) socket connection udp count

raw-count

(Optional) socket connection raw count

Command Mode

  • /exec

show sockets local-port-range

show sockets local-port-range [ __readonly__ <kstack_local_port_range_start> <kstack_local_port_range_end> <netstack_local_port_range_start> <netstack_local_port_range_end> <nat_local_port_range_start> <nat_local_port_range_end> ]

Syntax Description

show

Show running system information

sockets

Display sockets status and configuration

local-port-range

Display local port range

__readonly__

(Optional)

kstack_local_port_range_start

(Optional) Kstack local port range start

kstack_local_port_range_end

(Optional) Kstack local port range end

netstack_local_port_range_start

(Optional) Netstack local port range start

netstack_local_port_range_end

(Optional) Netstack local port range end

nat_local_port_range_start

(Optional) Nat local port range start

nat_local_port_range_end

(Optional) Nat local port range end

Command Mode

  • /exec

show sockets ns-port-kiosk

show sockets ns-port-kiosk [ __readonly__ [ TABLE_port_kiosk { <client-process-id> <client-name> } [ TABLE_port_state_pro_name { <entry-counter> [ <listening-port> ] [ <fwd-port> ] [ <tcp-state> ] [ <mts-sap> ] [ <protocol-name> ] } ] ] ]

Syntax Description

show

Show running system information

sockets

Display sockets status and configuration

ns-port-kiosk

Display port kiosk for netstack socket clients

__readonly__

(Optional)

TABLE_port_kiosk

(Optional) Sockets ns port kiosk information

client-process-id

(Optional) Client Process ID

client-name

(Optional) Client Name

TABLE_port_state_pro_name

(Optional) Sockets ns port state protocol information

entry-counter

(Optional) Table Entry Counter

listening-port

(Optional) Listening Port

fwd-port

(Optional) FWD Port

tcp-state

(Optional) TCP State

mts-sap

(Optional) MTS SAP

protocol-name

(Optional) Protocol Name

Command Mode

  • /exec

show sockets statistics

show sockets statistics [ all | tcp | tcp6 | tcpsum | udp | udp6 | udpsum | raw | raw6 | rawsum ] [ __readonly__ [ { TABLE_stat [ <rx-total> ] [ <rx-bad-csum> ] [ <rx-bad-offset> ] [ <rx-too-short> ] [ <rx-bad-md5> ] [ <rx-inseq-pack> ] [ <rx-inseq-bytes> ] [ <rx-dup-pack> ] [ <rx-dup-bytes> ] [ <rx-partdup-pack> ] [ <rx-partdup-bytes> ] [ <rx-oo-pack> ] [ <rx-oo-bytes> ] [ <rx-oo-drop-cnt> ] [ <rx-afterwin-pack> ] [ <rx-afterwin-bytes> ] [ <rx-afterclose-pack> ] [ <rx-winprobe-pack> ] [ <rx-winupdate-pack> ] [ <rx-dupack-pack> ] [ <rx-dupack-unsent-pack> ] [ <rx-ack-pack> ] [ <rx-ack-bytes> ] [ <rx-rcv-memdrop> ] [ <rx-dig-mssing> ] [ <rx-dig-unexpected> ] [ <rx-dig-notused> ] [ <rx-dig-valid> ] [ <rx-dig-invalid> ] [ <rx-get-passwd-fail> ] [ <rx-md5-mbuf-exded> ] [ <rx-uspec-src-recv> ] [ <rx-pkt-too-short> ] [ <rx-sin-finest> ] [ <rx-black-hole-syn> ] [ <rx-black-hole> ] [ <rx-drop-no-inpcb> ] [ <rx-drop-notcpcb> ] [ <rx-drp-sock-closed> ] [ <rx-syn-with-rst> ] [ <rx-syn-drop> ] [ <rx-bandlim> ] [ <rx-forged-pkt> ] [ <rx-drp-mbcast> ] [ <rx-drp-syn-add> ] [ <rx-drp-syn-recvd> ] [ <rx-drp-cc-sent> ] [ <rx-drp-rst-ccsent> ] [ <rx-frecv-enqueue> ] [ <rx-frecv-enqueue-fail> ] [ <rx-ftcp-cant-rcv-more> ] [ <rx-ftcp-data-ack-toapp-fail> ] [ <rx-ftcp-data-ack-toapp> ] [ <tx-total> ] [ <tx-urg> ] [ <tx-ctrl> ] [ <tx-data-pack> ] [ <tx-data-bytes> ] [ <tx-reasm-pack> ] [ <tx-reasm-bytes> ] [ <tx-ackonly-pack> ] [ <tx-winprobe-pack> ] [ <tx-winupdate-bytes> ] [ <tx-encrypt> ] [ <tx-unencrypt> ] [ <tx-md5rst> ] [ <tx-conn-init> ] [ <tx-conn-accepted> ] [ <tx-conn-estd> ] [ <closed> ] [ <dropped> ] [ <emb-dropped> ] [ <tx-rxmt-timeout> ] [ <tx-rxmt-timeout-dropped> ] [ <tx-ka-timeout> ] [ <tx-ka-probe> ] [ <tx-ka-drop> ] [ <gen-seg-timed> ] [ <gen-rtt-updated> ] [ <gen-delack> ] [ <gen-persist-timeout> ] [ <gen-paws-drop> ] [ <gen-predack> ] [ <gen-preddat> ] [ <gen-pcb-cachemiss> ] [ <gen-cache-drtt> ] [ <gen-cache-drttvar> ] [ <gen-cached-ssthresh> ] [ <gen-usedrtt> ] [ <gen-usedrttvar> ] [ <gen-usedssthresh> ] [ <gen-persistdrop> ] [ <gen-badsyn> ] [ <gen-mturesent> ] [ <gen-list-endrop> ] [ <gen-rpm-bind-synsock> ] [ <gen-rpm-bindsynadd> ] [ <gen-rpm-bindlookup> ] [ <gen-rpm-bindsetsock> ] [ <gen-rpm-unbind-getpass> ] [ <gen-rpm-unbinduser1> ] [ <gen-rpm-unbinduser2> ] [ <gen-rpm-unbindrollover> ] [ <gen-rpm-unbind-synfree> ] [ <gen-rpm-unbind-tpfree> ] [ <syn-sc-added> ] [ <syn-retransmitted> ] [ <syn-dupsyn> ] [ <syn-dropped> ] [ <syn-completed> ] [ <syn-bucket-overflow> ] [ <syn-cache-overflow> ] [ <syn-sc-reset> ] [ <syn-sc-stale> ] [ <syn-sc-aborted> ] [ <syn-sc-badack> ] [ <syn-sc-unreach> ] [ <syn-sc-zonefail> ] [ <syn-sc-sendcookie> ] [ <syn-sc-recvcookie> ] [ <syn-sc-crosshits> ] [ <syn-sc-supsyncrosshits> ] [ <syn-sc-removecrosshits> ] [ <udp-rx-version> ] [ <udp-rx-total> ] [ <udp-rx-bad-csum> ] [ <udp-rx-no-csum> ] [ <udp-rx-too-short> ] [ <udp-rx-bad-len> ] [ <udp-rx-no-port> ] [ <udp-rx-no-port-bcast> ] [ <udp-rx-no-port-mcast> ] [ <udp-rx-full-socket-drop> ] [ <udp-tx-total> ] [ <raw-rx-version> ] [ <raw-rx-rcvd> ] [ <raw-rx-no-port> ] [ <raw-rx-full-socket-drop> ] [ <raw-tx-sent> ] [ <inpcb-tot-alloc> ] [ <inpcb-tot-bind> ] [ <inpcb-tot-laddr> ] [ <inpcb-tot-connect> ] [ <inpcb-tot-disconnect> ] [ <inpcb-tot-detach> ] [ <inpcb-tot-detach-noinc> ] [ <inpcb-tot-detach-rort> ] [ <inpcb-tot-rtfree> ] [ <inpcb-tot-setsock-addr> ] [ <inpcb-tot-setpeeraddr> ] [ <inpcb-tot-notify> ] [ <inpcb-tot-lookup-npacl-deny> ] [ <inpcb-tot-lookup-npacl-allow> ] [ <inpcb-tot-inshash-ipv4> ] [ <inpcb-tot-inshash-ipv6> ] [ <inpcb-tot-brehash-ipv4> ] [ <inpcb-tot-brehash-ipv6> ] [ <inpcb-tot-bremhash> ] [ <inpcb-err-allocnomem> ] [ <inpcb-err-bindeinavl> ] [ <inpcb-err-eaddrinuse> ] [ <inpcb-err-eagain> ] [ <inpcb-err-eagain2> ] [ <inpcb-err-eaddrnotavail> ] [ <inpcb-err-eafnosupport> ] [ <inpcb-err-enomem> ] [ <inpcb-err-ehostunreach> ] [ <inpcb-err-laddr-enxio> ] [ <inpcb-err-laddr-ehostunreach2> ] [ <inpcb-err-connectladdr> ] [ <inpcb-err-connect-eaddrinuse> ] [ <inpcb-err-connbind> ] [ <inpcb-err-sockaddrenomem> ] [ <inpcb-err-sockaddreconnreset> ] [ <inpcb-err-peeraddr-enomem> ] [ <inpcb-err-econnrest> ] [ <inpcb-err-respond-enobufs> ] [ <inpcb-err-binshash-enobufs> ] [ <in6pcb-tot-setport> ] [ <in6pcb-tot-bind> ] [ <in6pcb-tot-laddr> ] [ <in6pcb-tot-connect> ] [ <in6pcb-tot-disconnect> ] [ <in6pcb-tot-detach> ] [ <in6pcb-tot-sockaddr> ] [ <in6pcb-tot-peeraddr> ] [ <in6pcb-tot-notify> ] [ <in6pcb-tot-lookuplocal> ] [ <in6pcb-tot-hashnpacl-deny> ] [ <in6pcb-err-setporteagain> ] [ <in6pcb-err-setporteagain2> ] [ <in6pcb-err-seteagain3> ] [ <in6pcb-bind-eafnosupport> ] [ <in6pcb-err-bindeaddrinuse> ] [ <in6pcb-err-bindeaddrinuse2> ] [ <in6pcb-err-bindeaddrinuse3> ] [ <in6pcb-err-bindeaddrinuse4> ] [ <in6pcb-err-bindsetport> ] [ <in6pcb-err-bindeagain> ] [ <in6pcb-err-laddr-eafnosupport> ] [ <in6pcb-err-eaddrnotavail> ] [ <in6pcb-err-laddr-enomem> ] [ <in6pcb-err-laddr-ehostreach> ] [ <in6pcb-err-laddr-ehostunreach2> ] [ <in6pcb-err-laddr-ehostunreach3> ] [ <in6pcb-err-laddr-ehostunreach4> ] [ <in6pcb-err-laddr-enxio> ] [ <in6pcb-err-connladdr> ] [ <in6pcb-err-conneaddrinuse> ] [ <in6pcb-err-connbind> ] [ <in6pcb-err-sockaddr-enomem> ] [ <in6pcb-err-v4maps-enomem> ] [ <in6pcb-err-setsock-noinp> ] [ <in6pcb-err-setpeer-noinp> ] [ <in6pcb-err-sockaddr-noinp> ] [ <in6pcb-err-peeraddr-noinp> ] [ <in6pcb-err-notify-einavl> ] [ <in6pcb-err-ctloutput-nosoopt> ] } ] ]

Syntax Description

show

Show running system information

sockets

Display sockets status and configuration

statistics

Display sockets statistics

all

(Optional) Display TCP/UDP/RAW v4/v6 protocols statistics

tcp

(Optional) Display TCP v4 protocol statistics

tcp6

(Optional) Display TCP v6 protocol statistics

tcpsum

(Optional) Display sum of TCP v4 and TCP v6 protocols statistics

udp

(Optional) Display UDP v4 protocol statistics

udp6

(Optional) Display UDP v6 protocol statistics

udpsum

(Optional) Display sum of UDP v4 and UDP v6 protocols statistics

raw

(Optional) Display RAW v4 protocol statistics

raw6

(Optional) Display RAW v6 protocol statistics

rawsum

(Optional) Display sum of RAW v4 and RAW v6 protocols statistics

__readonly__

(Optional)

TABLE_stat

(Optional) sockets statistics table

rx-total

(Optional) total packets received

rx-bad-csum

(Optional) packets received with ccksum errs

rx-bad-offset

(Optional) packets received with bad offset

rx-too-short

(Optional) packets received too short

rx-bad-md5

(Optional) Recieved bad digest

rx-inseq-pack

(Optional) packets received in sequence

rx-inseq-bytes

(Optional) bytes received in sequence

rx-dup-pack

(Optional) duplicate-only packets received

rx-dup-bytes

(Optional) duplicate-only bytes received

rx-partdup-pack

(Optional) packets with some duplicate data

rx-partdup-bytes

(Optional) dup. bytes in part-dup. packets

rx-oo-pack

(Optional) out-of-order packets received

rx-oo-bytes

(Optional) out-of-order bytes received

rx-oo-drop-cnt

(Optional) out-of-order drop count

rx-afterwin-pack

(Optional) packets with data after window

rx-afterwin-bytes

(Optional) bytes rcvd after window

rx-afterclose-pack

(Optional) packets rcvd after close

rx-winprobe-pack

(Optional) rcvd window probe packets

rx-winupdate-pack

(Optional) rcvd window update packets

rx-dupack-pack

(Optional) rcvd duplicate acks

rx-dupack-unsent-pack

(Optional) rcvd acks for unsent data

rx-ack-pack

(Optional) rcvd ack packets

rx-ack-bytes

(Optional) bytes acked by rcvd acks

rx-rcv-memdrop

(Optional) packets dropped for lack of memory

rx-dig-mssing

(Optional) digest missing

rx-dig-unexpected

(Optional) digest unexpected

rx-dig-notused

(Optional) digest not used

rx-dig-valid

(Optional) digest valid

rx-dig-invalid

(Optional) digest invalid

rx-get-passwd-fail

(Optional) get pass failed for RST

rx-md5-mbuf-exded

(Optional) md5 passwd exceeds mbuf

rx-uspec-src-recv

(Optional) Dropped Unspecified src pkt recieved

rx-pkt-too-short

(Optional) Dropped Packet too short

rx-sin-finest

(Optional) Dropped packet set with SYN/FIN

rx-black-hole-syn

(Optional) Dropped black hole SYN

rx-black-hole

(Optional) Dropped black hole

rx-drop-no-inpcb

(Optional) Dropped no inpcb

rx-drop-notcpcb

(Optional) Dropped no tcpcb

rx-drp-sock-closed

(Optional) Dropped socket closed

rx-syn-with-rst

(Optional) Dropped SYN with reset

rx-syn-drop

(Optional) Dropped SYN

rx-bandlim

(Optional) Dropped Bandlim rst open port

rx-forged-pkt

(Optional) Dropped Same src/dst

rx-drp-mbcast

(Optional) Dropped Broadcast/Multicast

rx-drp-syn-add

(Optional) Dropped Adding SYN failed

rx-drp-syn-recvd

(Optional) ACK recvd not for our SYN

rx-drp-cc-sent

(Optional) Dropped cc sent

rx-drp-rst-ccsent

(Optional) Dropped cc sent with reset

rx-frecv-enqueue

(Optional) Fast recv packets enqueued

rx-frecv-enqueue-fail

(Optional) Fast recv enqueue failed

rx-ftcp-cant-rcv-more

(Optional) Fast TCP can not recv more

rx-ftcp-data-ack-toapp-fail

(Optional) Fast TCP data ACK to app failed

rx-ftcp-data-ack-toapp

(Optional) Fast TCP data ACK to app

tx-total

(Optional) total packets sent

tx-urg

(Optional) packets sent with URG only

tx-ctrl

(Optional) control (SYN|FIN|RST) packets sent

tx-data-pack

(Optional) data packets sent

tx-data-bytes

(Optional) data bytes sent

tx-reasm-pack

(Optional) data packets retransmitted

tx-reasm-bytes

(Optional) data bytes retransmitted

tx-ackonly-pack

(Optional) ack-only packets sent

tx-winprobe-pack

(Optional) window probes sent

tx-winupdate-bytes

(Optional) window update-only packets sent

tx-encrypt

(Optional) Encrypted packets sent

tx-unencrypt

(Optional) Unencrypted packets sent

tx-md5rst

(Optional) No of encrypted RST packets

tx-conn-init

(Optional) connections initiated

tx-conn-accepted

(Optional) connections accepted

tx-conn-estd

(Optional) connections established

closed

(Optional) conn. closed (includes drops)

dropped

(Optional) connections dropped

emb-dropped

(Optional) embryonic connections dropped

tx-rxmt-timeout

(Optional) total rxmt timeout

tx-rxmt-timeout-dropped

(Optional) connections dropped in rxmt timeout

tx-ka-timeout

(Optional) keepalive timeouts

tx-ka-probe

(Optional) keepalive probes sent

tx-ka-drop

(Optional) connections dropped in keepalive

gen-seg-timed

(Optional) segs where we tried to get rtt

gen-rtt-updated

(Optional) times we succeeded to get rtt

gen-delack

(Optional) delayed acks sent

gen-persist-timeout

(Optional) persist timeouts

gen-paws-drop

(Optional) segments dropped due to PAWS

gen-predack

(Optional) hdr predict ok for acks

gen-preddat

(Optional) hdr predict ok for data pkts

gen-pcb-cachemiss

(Optional) PCB cache miss

gen-cache-drtt

(Optional) times cached RTT in route updated

gen-cache-drttvar

(Optional) times cached rttvar updated

gen-cached-ssthresh

(Optional) times cached ssthresh updated

gen-usedrtt

(Optional) times RTT initialized from route

gen-usedrttvar

(Optional) times RTTVAR initialized from rt

gen-usedssthresh

(Optional) times ssthresh initialized from rt

gen-persistdrop

(Optional) timeout in persist state

gen-badsyn

(Optional) bogus SYN, e.g. premature ACK

gen-mturesent

(Optional) resends due to MTU discovery

gen-list-endrop

(Optional) listen queue overflows

gen-rpm-bind-synsock

(Optional) rpm bind in synsock

gen-rpm-bindsynadd

(Optional) rpm bind in synadd

gen-rpm-bindlookup

(Optional) rpm bind in lookup

gen-rpm-bindsetsock

(Optional) rpm bind in setsock

gen-rpm-unbind-getpass

(Optional) rpm unbind get pass

gen-rpm-unbinduser1

(Optional) rpm unbind by user

gen-rpm-unbinduser2

(Optional) rpm unbind by user1

gen-rpm-unbindrollover

(Optional) rpm unbind during rollover

gen-rpm-unbind-synfree

(Optional) rpm unbind in syn free

gen-rpm-unbind-tpfree

(Optional) rpm unbind in tp free

syn-sc-added

(Optional) entry added to syncache

syn-retransmitted

(Optional) syncache entry was retransmitted

syn-dupsyn

(Optional) duplicate SYN packet

syn-dropped

(Optional) could not reply to packet

syn-completed

(Optional) successful extraction of entry

syn-bucket-overflow

(Optional) syncache per-bucket limit hit

syn-cache-overflow

(Optional) syncache cache limit hit

syn-sc-reset

(Optional) RST removed entry from syncache

syn-sc-stale

(Optional) timed out or listen socket gone

syn-sc-aborted

(Optional) syncache entry aborted

syn-sc-badack

(Optional) removed due to bad ACK

syn-sc-unreach

(Optional) ICMP unreachable received

syn-sc-zonefail

(Optional) zalloc() failed

syn-sc-sendcookie

(Optional) SYN cookie sent

syn-sc-recvcookie

(Optional) SYN cookie received

syn-sc-crosshits

(Optional) crosshits on the SC blocks

syn-sc-supsyncrosshits

(Optional) crosshits dup SYN on SC block

syn-sc-removecrosshits

(Optional) crosshits on SC blocks to remove

udp-rx-version

(Optional) udp sockets version

udp-rx-total

(Optional) total udp packets

udp-rx-bad-csum

(Optional) udp checksum error

udp-rx-no-csum

(Optional) udp no checksum

udp-rx-too-short

(Optional) udp packets drops

udp-rx-bad-len

(Optional) udp bad length

udp-rx-no-port

(Optional) udp no port

udp-rx-no-port-bcast

(Optional) udp no port broadcast

udp-rx-no-port-mcast

(Optional) udp no port multicast

udp-rx-full-socket-drop

(Optional) udp dropped full socket

udp-tx-total

(Optional) udp total packets

raw-rx-version

(Optional) raw sockets version

raw-rx-rcvd

(Optional) raw sockets connection received

raw-rx-no-port

(Optional) raw socket no port

raw-rx-full-socket-drop

(Optional) raw socket full sockets drop

raw-tx-sent

(Optional) raw socket connection sent

inpcb-tot-alloc

(Optional) inpcb allocation

inpcb-tot-bind

(Optional) inpcb bind

inpcb-tot-laddr

(Optional) inpcb laddr

inpcb-tot-connect

(Optional) inpcb connect

inpcb-tot-disconnect

(Optional) inpcb disconnect

inpcb-tot-detach

(Optional) inpcb detach

inpcb-tot-detach-noinc

(Optional) inpcb detaach no increment

inpcb-tot-detach-rort

(Optional) inpcb detach no return

inpcb-tot-rtfree

(Optional) inpcb rt free

inpcb-tot-setsock-addr

(Optional) inpcb set socket address

inpcb-tot-setpeeraddr

(Optional) inpcb set peer address

inpcb-tot-notify

(Optional) inpcb notify

inpcb-tot-lookup-npacl-deny

(Optional) inpcb lookup hash npacl deny

inpcb-tot-lookup-npacl-allow

(Optional) inpcb lookup npacl allow

inpcb-tot-inshash-ipv4

(Optional) inpcb inshash ipv4

inpcb-tot-inshash-ipv6

(Optional) inpcb inshash ipv6

inpcb-tot-brehash-ipv4

(Optional) inpcb brehash ipv4

inpcb-tot-brehash-ipv6

(Optional) inpcb brehash ipv6

inpcb-tot-bremhash

(Optional) inpcb brehash

inpcb-err-allocnomem

(Optional) inpcb allocation no memory error

inpcb-err-bindeinavl

(Optional) inpcb bind einval error

inpcb-err-eaddrinuse

(Optional) inpcb eaddr in use error

inpcb-err-eagain

(Optional) inpcb eagain error

inpcb-err-eagain2

(Optional) inpcb eagain2 error

inpcb-err-eaddrnotavail

(Optional) inpcb eaddr not availableerror

inpcb-err-eafnosupport

(Optional) inpcb eaf no support error

inpcb-err-enomem

(Optional) inpcb no-memory error

inpcb-err-ehostunreach

(Optional) inpcb ehost unreachable error

inpcb-err-laddr-enxio

(Optional) inpcb laddr enxio error

inpcb-err-laddr-ehostunreach2

(Optional) inpcb laddr ehost unreachable2 error

inpcb-err-connectladdr

(Optional) inpcb connect laddr error

inpcb-err-connect-eaddrinuse

(Optional) inpcb connect eaddress in use error

inpcb-err-connbind

(Optional) inpcb connect bind error

inpcb-err-sockaddrenomem

(Optional) inpcb socket address no memory error

inpcb-err-sockaddreconnreset

(Optional) inpcb socket address econnect reset error

inpcb-err-peeraddr-enomem

(Optional) inpcb peer address no memory error

inpcb-err-econnrest

(Optional) inpcb connection rest error

inpcb-err-respond-enobufs

(Optional) inpcb respond no buffer error

inpcb-err-binshash-enobufs

(Optional) inpcb binshash no buffer error

in6pcb-tot-setport

(Optional) in6pcb set port error

in6pcb-tot-bind

(Optional) in6pcb bind

in6pcb-tot-laddr

(Optional) in6pcb laddr

in6pcb-tot-connect

(Optional) in6pcb connect

in6pcb-tot-disconnect

(Optional) in6pcb disconnect

in6pcb-tot-detach

(Optional) in6pcb detach

in6pcb-tot-sockaddr

(Optional) in6pcb socket address

in6pcb-tot-peeraddr

(Optional) in6pcb peer address

in6pcb-tot-notify

(Optional) in6pcb notify

in6pcb-tot-lookuplocal

(Optional) in6pcb lookup local

in6pcb-tot-hashnpacl-deny

(Optional) in6pcb hash npacl deny

in6pcb-err-setporteagain

(Optional) in6pcb set port again error

in6pcb-err-setporteagain2

(Optional) in6pcb set port again2 error

in6pcb-err-seteagain3

(Optional) in6pcb set port again3 error

in6pcb-bind-eafnosupport

(Optional) in6pcb bind eaf no support error

in6pcb-err-bindeaddrinuse

(Optional) in6pcb bind address in use error

in6pcb-err-bindeaddrinuse2

(Optional) in6pcb bind address in use2 error

in6pcb-err-bindeaddrinuse3

(Optional) in6pcb bind address in use3 error

in6pcb-err-bindeaddrinuse4

(Optional) in6pcb bind address in use4 error

in6pcb-err-bindsetport

(Optional) in6pcb bind setport error

in6pcb-err-bindeagain

(Optional) in6pcb bind again error

in6pcb-err-laddr-eafnosupport

(Optional) in6pcb laddr eaf no support error

in6pcb-err-eaddrnotavail

(Optional) in6pcb address not available error

in6pcb-err-laddr-enomem

(Optional) in6pcb laddr no memory error

in6pcb-err-laddr-ehostreach

(Optional) in6pcb laddr host reach error

in6pcb-err-laddr-ehostunreach2

(Optional) in6pcb laddr host reach2 error

in6pcb-err-laddr-ehostunreach3

(Optional) in6pcb laddr host reach3 error

in6pcb-err-laddr-ehostunreach4

(Optional) in6pcb laddr host reach4 error

in6pcb-err-laddr-enxio

(Optional) in6pcb laddr enxio error

in6pcb-err-connladdr

(Optional) in6pcb connect laddr error

in6pcb-err-conneaddrinuse

(Optional) in6pcb connect eaddress in use error

in6pcb-err-connbind

(Optional) in6pcb connect bind error

in6pcb-err-sockaddr-enomem

(Optional) in6pcb socket address no memory error

in6pcb-err-v4maps-enomem

(Optional) in6pcb v4maps no memory error

in6pcb-err-setsock-noinp

(Optional) in6pcb set socket noinp error

in6pcb-err-setpeer-noinp

(Optional) in6pcb set peer noinp error

in6pcb-err-sockaddr-noinp

(Optional) in6pcb socket address noinp error

in6pcb-err-peeraddr-noinp

(Optional) in6pcb peer address noinp error

in6pcb-err-notify-einavl

(Optional) in6pcb notify eingress available error

in6pcb-err-ctloutput-nosoopt

(Optional) in6pcb control output no socket opt error

Command Mode

  • /exec

show sockets tcp keychain binding

show sockets tcp keychain binding [ __readonly__ { TABLE_keychain <keychain> <handle> <ref_count> } ]

Syntax Description

show

Show running system information

sockets

Display sockets status and configuration

tcp

TCP information

keychain

Keychain information

binding

Binding information reagarding RPM

__readonly__

(Optional)

TABLE_keychain

(Optional) all sockets tcp keychains

keychain

(Optional) xml keychain information

handle

(Optional) xml handle information

ref_count

(Optional) xml refcount information

Command Mode

  • /exec

show software authenticity file

show software authenticity { file <uri0> | running } [ __readonly__ [ TABLE_filekey <image> <image_type> <signer_cname> [ <signer_org_unit> ] <signer_org_name> <cert_serial_num> <hash_algo> <signature_algo> [ <key_version> ] [ <verifier_name> <verifier_version> ] ] ]

Syntax Description

show

show information

software

signifies information about current software

authenticity

signifies image signature

file

show verification information of a file

uri0

file to be verified

running

Show running image information

__readonly__

(Optional)

TABLE_filekey

(Optional) file signer information

image

(Optional) Image

image_type

(Optional) Image type

signer_cname

(Optional) Signer Common Name

signer_org_unit

(Optional) Signer Organization Unit

signer_org_name

(Optional) Signer Organization Name

cert_serial_num

(Optional) Certificate Serial Number

hash_algo

(Optional) Hash Algorithm Used

signature_algo

(Optional) Signature Algorithm Used

key_version

(Optional) key version used to sign this file

verifier_name

(Optional) verifier Image

verifier_version

(Optional) Verifier version

Command Mode

  • /exec

show software authenticity keys

show software authenticity keys [ __readonly__ [ TABLE_sh_keys <key_num> <key_type> <pub_key_algo> <modulus> <exponent> <key_version> [ <product_name> ] ] ]

Syntax Description

show

show information

software

signifies information about current sofware

authenticity

signifies image signature

keys

show installed verification keys

__readonly__

(Optional)

TABLE_sh_keys

(Optional) table of device keys

key_num

(Optional) Key number

key_type

(Optional) Type of key record

pub_key_algo

(Optional) Public key algorithm

modulus

(Optional) Key Modulus

exponent

(Optional) Key exponent

key_version

(Optional) Key version

product_name

(Optional) Product name

Command Mode

  • /exec

show spanning-tree

{ show spanning-tree [ vlan <vlan-id> | bridge-domain <bd-id> ] [ __readonly__ TABLE_tree <tree_id> <tree_tree_type> <tree_protocol> <port_count> <bridge_mac> <bridge_priority> <tree_designated_root> <tree_designated_root_priority> <stp_active> <root_path_cost> <root_port_if_index> <root_port_priority> <root_port_number> <topology_change> <topology_change_detected> <topology_change_count> <topology_change_time_since_last> <tc_initiator_if_index> <bridge_forward_delay> <bridge_max_age> <bridge_hello_time> <max_age> <hello_time> <forward_delay> <hold_time> <hello_timer> <topology_change_timer> <tcn_timer> <aging_timer> <disabled> <blocking> <listening> <learning> <forwarding> <invalid> TABLE_port <if_index> [ <vpc> ] <port_info_tree_id> <state> <role> <port_priority> <port_number> <port_protocol> <port_tree_type> <path_cost> <port_designated_root> <port_designated_root_priority> <designated_cost> <designated_bridge> <designated_bridge_priority> <designated_port> <tc_acknowledge> <forward_transition_count> <self_looped> <inconsistency> <bpdus_in> <bpdus_out> <port_fast> <link_type> <port_guard> <bpdu_guard> <bpdu_filter> <oper_portfast> <oper_p2p> <oper_loopguard> <oper_bpduguard> <oper_bpdufilter> <int_bpdufilter> [ <oper_networkport> ] <forward_delay_timer> <hold_timer> <message_age> <peer> <dispute> <pvstsim_inc_timer> [ <boundary> ] [ <simulate_pvst_cfg> ] [ <simulate_pvst> ] [ <prestd> ] ] } | { show spanning-tree [ vlan <vlan-id> | bridge-domain <bd-id> ] { <verbosity> | active } + [ __readonly__ TABLE_tree <tree_id> <tree_tree_type> <tree_protocol> <port_count> <bridge_mac> <bridge_priority> <tree_designated_root> <tree_designated_root_priority> <stp_active> <root_path_cost> <root_port_if_index> <root_port_priority> <root_port_number> <topology_change> <topology_change_detected> <topology_change_count> <topology_change_time_since_last> <tc_initiator_if_index> <bridge_forward_delay> <bridge_max_age> <bridge_hello_time> <max_age> <hello_time> <forward_delay> <hold_time> <hello_timer> <topology_change_timer> <tcn_timer> <aging_timer> <disabled> <blocking> <listening> <learning> <forwarding> <invalid> TABLE_port <if_index> <port_info_tree_id> <state> <role> <port_priority> <port_number> <port_protocol> <port_tree_type> <path_cost> <port_designated_root> <port_designated_root_priority> <designated_cost> <designated_bridge> <designated_bridge_priority> <designated_port> <tc_acknowledge> <forward_transition_count> <self_looped> <inconsistency> <bpdus_in> <bpdus_out> <port_fast> <link_type> <port_guard> <bpdu_guard> <bpdu_filter> <oper_portfast> <oper_p2p> <oper_loopguard> <oper_bpduguard> <oper_bpdufilter> <int_bpdufilter> [ <oper_networkport> ] <forward_delay_timer> <hold_timer> <message_age> <peer> <dispute> <pvstsim_inc_timer> [ <boundary> ] [ <simulate_pvst_cfg> ] [ <simulate_pvst> ] [ <prestd> ] ] }

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

vlan

(Optional) VLAN Switch Spanning Trees

bridge-domain

(Optional) Bridge-Domain Switch Spanning Trees

vlan-id

(Optional) vlan range, Example: 1,3-5,7,9-11

bd-id

(Optional) Bridge-Domain range, Example: 2,4-5,7,9-11

verbosity

verbosity

active

Report on active interfaces only

__readonly__

(Optional) Read Only

TABLE_tree

(Optional)

tree_id

(Optional) Tree Id

tree_tree_type

(Optional) Tree Type

tree_protocol

(Optional) Tree Protocol

port_count

(Optional) Number of Ports in Tree

bridge_mac

(Optional) Bridge Mac

bridge_priority

(Optional) Bridge Priority

tree_designated_root

(Optional) Designated Root Mac

tree_designated_root_priority

(Optional) Designated Root Priority

stp_active

(Optional) Spanning Tree State

root_path_cost

(Optional) Root Path Cost

root_port_if_index

(Optional) Root Port

root_port_priority

(Optional) Root Port Priority

root_port_number

(Optional) Root Port Number

topology_change

(Optional) Topology Change flag is set ?

topology_change_detected

(Optional) Topology Change detected flag is set ?

topology_change_count

(Optional) Topology Change Count

topology_change_time_since_last

(Optional) Time since last TC

tc_initiator_if_index

(Optional) Topology Change initiator port

max_age

(Optional) Max Age

hello_time

(Optional) Hello Time

forward_delay

(Optional) Forward delay

bridge_max_age

(Optional) Configured Bridge Max Age

bridge_hello_time

(Optional) Configured Hello Time

bridge_forward_delay

(Optional) Configured Forward Delay

hold_time

(Optional) Configured Hold Time

hello_timer

(Optional) Hello Timer Value

topology_change_timer

(Optional) Topology Change Timer Value

tcn_timer

(Optional) TCN Timer Value

aging_timer

(Optional) Ageing Timer Value

disabled

(Optional) Number of ports Disabled

blocking

(Optional) Number of ports Blocking

listening

(Optional) Number of ports Listening

learning

(Optional) Number of ports Learning

forwarding

(Optional) Number of ports Forwarding

invalid

(Optional) Number of ports Invalid

TABLE_port

(Optional)

if_index

(Optional) Interface

vpc

(Optional) STP Port memebr of MCT/VPC PO

port_info_tree_id

(Optional) Tree Id

state

(Optional) STP Port State

role

(Optional) STP Port Role

port_priority

(Optional) Port priority

port_number

(Optional) Port Number

port_protocol

(Optional) Tree Protocol

port_tree_type

(Optional) Tree Type

path_cost

(Optional) Cost configured on this port

port_designated_root

(Optional) Designated Root Mac

port_designated_root_priority

(Optional) Designated Root Priority

designated_cost

(Optional) Designated cost

designated_bridge

(Optional) Designated bridge mac

designated_bridge_priority

(Optional) Designated bridge priority

designated_port

(Optional) Designated Port Id

tc_acknowledge

(Optional) Is topology change acknowledge flag set ?

forward_transition_count

(Optional) Port transitions to Forwarding

self_looped

(Optional) Is Port self looped ?

inconsistency

(Optional) PVST+ Inconsistency Error Flags

bpdus_in

(Optional) BPDUs received on this stp port

bpdus_out

(Optional) BPDUs send on this stp port

port_fast

(Optional) Port Fast configured on port

link_type

(Optional) Link type configured on this port

port_guard

(Optional) Port Guard mode of port

bpdu_guard

(Optional) Bpdu Guard mode configured

bpdu_filter

(Optional) Bpdu Filter mode configured

oper_portfast

(Optional) Is portfast enabled ?

oper_p2p

(Optional) Is port P2P ?

oper_loopguard

(Optional) Is loopguard enabled ?

oper_bpduguard

(Optional) Is bpduguard enabled ?

oper_bpdufilter

(Optional) Is bpdufilter enabled ?

int_bpdufilter

(Optional) Is internal bpdufilter enabled ?

forward_delay_timer

(Optional) Forward Delay timer

hold_timer

(Optional) Hold Timer

message_age

(Optional) Message age timer

peer

(Optional) STP protocol of the peer

dispute

(Optional) Is port Disputed ?

pvstsim_inc_timer

(Optional) PVST Simulation Inconsistency Hold Timer

boundary

(Optional) Is port boundary ?

prestd

(Optional) Is port Pre STD MST ?

simulate_pvst

(Optional) Is port is pvst simulate mode ?

oper_networkport

(Optional) Is network port enabled ?

simulate_pvst_cfg

(Optional) PVST Simulation configured on port

Command Mode

  • /exec

show spanning-tree blockedports

{ show spanning-tree [ vlan <vlan-id> ] blockedports [ __readonly__ [ TABLE_tree [ <port_info_tree_id> ] [ TABLE_port [ <if_index> ] ] ] [ <tree_type> ] [ <num_ports> ] ] }

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

vlan

(Optional) VLAN Switch Spanning Trees

__readonly__

(Optional)

TABLE_tree

(Optional)

port_info_tree_id

(Optional) Tree name

TABLE_port

(Optional)

if_index

(Optional) Port name

tree_type

(Optional) Tree Type

num_ports

(Optional) Number of Ports

vlan-id

(Optional) vlan range, Example: 1,3-5,7,9-11

blockedports

Show blocked ports

Command Mode

  • /exec

show spanning-tree bridge

{ show spanning-tree [ vlan <vlan-id> | bridge-domain <bd-id> ] bridge [ priority [ system-id ] ] [ __readonly__ { TABLE_tree <tree_id> <tree_tree_type> <tree_protocol> <bridge_mac> <bridge_priority> <bridge_forward_delay> <bridge_max_age> <bridge_hello_time> } ] } | { show spanning-tree [ vlan <vlan-id> | bridge-domain <bd-id> ] bridge [ { detail | brief } ] [ __readonly__ { TABLE_tree <tree_id> <tree_tree_type> <tree_protocol> <bridge_mac> <bridge_priority> <bridge_forward_delay> <bridge_max_age> <bridge_hello_time> } ] } | { show spanning-tree [ vlan <vlan-id> | bridge-domain <bd-id> ] bridge [ { address | forward-time | hello-time | id | max-age | protocol } ] [ __readonly__ { TABLE_tree <tree_id> <tree_tree_type> <tree_protocol> <bridge_mac> <bridge_priority> <bridge_forward_delay> <bridge_max_age> <bridge_hello_time> } ] }

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

vlan

(Optional) VLAN Switch Spanning Trees

bridge-domain

(Optional) Bridge-Domain Switch Spanning Trees

vlan-id

(Optional) vlan range, Example: 1,3-5,7,9-11

bd-id

(Optional) Bridge-Domain range, Example: 2,4-5,7,9-11

bridge

Status and configuration of this bridge

address

(Optional) Mac address of this bridge

forward-time

(Optional) Forward delay interval

hello-time

(Optional) Hello time

id

(Optional) Spanning tree bridge identifier

max-age

(Optional) Max age

protocol

(Optional) Spanning tree protocol

brief

(Optional) Brief summary of the status and configuration output

detail

(Optional) Detailed of the status and configuration

priority

(Optional) Bridge priority of this bridge

system-id

(Optional) Spanning tree priority with system id extension

__readonly__

(Optional) Read Only

TABLE_tree

(Optional)

tree_id

(Optional) Tree Id

tree_tree_type

(Optional) Tree Type

tree_protocol

(Optional) Tree Protocol

bridge_mac

(Optional) Bridge Mac

bridge_priority

(Optional) Bridge Priority

bridge_forward_delay

(Optional) Configured Forward Delay

bridge_max_age

(Optional) Configured Bridge Max Age

bridge_hello_time

(Optional) Configured Hello Time

Command Mode

  • /exec

show spanning-tree inconsistentports

{ show spanning-tree [ vlan <vlan-id> ] inconsistentports [ __readonly__ [ TABLE_tree <port_info_tree_id> <if_index> <inconsistency> ] [ <tree_type> ] [ <num_ports> ] ] }

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

vlan

(Optional) VLAN Switch Spanning Trees

vlan-id

(Optional) vlan range, Example: 1,3-5,7,9-11

inconsistentports

Show inconsistent ports

__readonly__

(Optional)

TABLE_tree

(Optional)

port_info_tree_id

(Optional) Tree name

if_index

(Optional) Port name

inconsistency

(Optional) Inconsistency type

tree_type

(Optional) Tree Type

num_ports

(Optional) Number of Ports

Command Mode

  • /exec

show spanning-tree interface

{ show spanning-tree [ vlan <vlan-id> | bridge-domain <bd-id> ] interface <interface-id> [ __readonly__ { TABLE_port <if_index> [ <vpc> ] <port_info_tree_id> <state> <role> <port_priority> <port_number> <port_protocol> <port_tree_type> <path_cost> <port_designated_root> <port_designated_root_priority> <designated_cost> <designated_bridge> <designated_bridge_priority> <designated_port> <tc_acknowledge> <forward_transition_count> <self_looped> <inconsistency> <bpdus_in> <bpdus_out> <port_fast> <link_type> <port_guard> <bpdu_guard> <bpdu_filter> <oper_portfast> <oper_p2p> <oper_loopguard> <oper_bpduguard> <oper_bpdufilter> <int_bpdufilter> <oper_networkport> <forward_delay_timer> <hold_timer> <message_age> <peer> <dispute> <pvstsim_inc_timer> [ <boundary> ] [ <simulate_pvst_cfg> ] [ <simulate_pvst> ] [ <prestd> ] } ] } | { show spanning-tree [ vlan <vlan-id> | bridge-domain <bd-id> ] interface <interface-id> { <verbosity> | active } + [ __readonly__ { TABLE_port <if_index> [ <vpc> ] <port_info_tree_id> <state> <role> <port_priority> <port_number> <port_protocol> <port_tree_type> <path_cost> <port_designated_root> <port_designated_root_priority> <designated_cost> <designated_bridge> <designated_bridge_priority> <designated_port> <tc_acknowledge> <forward_transition_count> <self_looped> <inconsistency> <bpdus_in> <bpdus_out> <port_fast> <link_type> <port_guard> <bpdu_guard> <bpdu_filter> <oper_portfast> <oper_p2p> <oper_loopguard> <oper_bpduguard> <oper_bpdufilter> <int_bpdufilter> <oper_networkport> <forward_delay_timer> <hold_timer> <message_age> <peer> <dispute> <pvstsim_inc_timer> [ <boundary> ] [ <simulate_pvst_cfg> ] [ <simulate_pvst> ] [ <prestd> ] } ] }

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

vlan

(Optional) VLAN Switch Spanning Trees

bridge-domain

(Optional) Bridge-Domain Switch Spanning Trees

vlan-id

(Optional) vlan range, Example: 1,3-5,7,9-11

bd-id

(Optional) Bridge-Domain range, Example: 2,4-5,7,9-11

interface

Spanning Tree interface status and configuration

interface-id

verbosity

verbosity

active

Report on active instances only

__readonly__

(Optional) Read Only

TABLE_port

(Optional)

if_index

(Optional) Interface

vpc

(Optional) STP Port memebr of MCT/VPC PO

port_info_tree_id

(Optional) Tree Id

state

(Optional) STP Port State

role

(Optional) STP Port Role

port_priority

(Optional) Port priority

port_number

(Optional) Port Number

port_protocol

(Optional) Tree Protocol

port_tree_type

(Optional) Tree Type

path_cost

(Optional) Cost configured on this port

port_designated_root

(Optional) Designated Root Mac

port_designated_root_priority

(Optional) Designated Root Priority

designated_cost

(Optional) Designated cost

designated_bridge

(Optional) Designated bridge mac

designated_bridge_priority

(Optional) Designated bridge priority

designated_port

(Optional) Designated Port Id

tc_acknowledge

(Optional) Is topology change acknowledge flag set ?

forward_transition_count

(Optional) Port transitions to Forwarding

self_looped

(Optional) Is Port self looped ?

inconsistency

(Optional) PVST+ Inconsistency Error Flags

bpdus_in

(Optional) BPDUs received on this stp port

bpdus_out

(Optional) BPDUs send on this stp port

port_fast

(Optional) Port Fast configured on port

link_type

(Optional) Link type configured on this port

port_guard

(Optional) Port Guard mode of port

bpdu_guard

(Optional) Bpdu Guard mode configured

bpdu_filter

(Optional) Bpdu Filter mode configured

oper_portfast

(Optional) Is portfast enabled ?

oper_p2p

(Optional) Is port P2P ?

oper_loopguard

(Optional) Is loopguard enabled ?

oper_bpduguard

(Optional) Is bpduguard enabled ?

oper_bpdufilter

(Optional) Is bpdufilter enabled ?

int_bpdufilter

(Optional) Is internal bpdufilter enabled ?

forward_delay_timer

(Optional) Forward Delay timer

hold_timer

(Optional) Hold Timer

message_age

(Optional) Message age timer

peer

(Optional) STP protocol of the peer

dispute

(Optional) Is port Disputed ?

pvstsim_inc_timer

(Optional) PVST Simulation Inconsistency Hold Timer

boundary

(Optional) Is port boundary ?

prestd

(Optional) Is port Pre STD MST ?

simulate_pvst

(Optional) Is port is pvst simulate mode ?

oper_networkport

(Optional) Is network port enabled ?

simulate_pvst_cfg

(Optional) PVST Simulation configured on port

Command Mode

  • /exec

show spanning-tree interface

{ show spanning-tree [ vlan <vlan-id> ] interface <interface-id> { cost | inconsistency | edge | priority | rootcost | state } [ __readonly__ [ TABLE_vlan_interface_info <tree_name> [ <cost> ] [ <edge> ] [ <inconsistency> ] [ <priority> ] [ <rootcost> ] [ <state> ] ] ] }

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

vlan

(Optional) VLAN Switch Spanning Trees

vlan-id

(Optional) vlan range, Example: 1,3-5,7,9-11

interface

Spanning Tree interface status and configuration

interface-id

cost

Port path cost

inconsistency

Port inconsistency state

edge

Edge Port configuration

priority

Port priority

rootcost

Path cost to root

state

Port spanning tree state

__readonly__

(Optional)

TABLE_vlan_interface_info

(Optional)

tree_name

(Optional) Spanning tree name

cost

(Optional) Path cost

edge

(Optional) Portfast enabled or not

inconsistency

(Optional) Port inconsistency

priority

(Optional) Port Priority

rootcost

(Optional) Designated Cost

state

(Optional) Port state

Command Mode

  • /exec

show spanning-tree issu-impact

show spanning-tree issu-impact [ __readonly__ [ TABLE_topology <tc_detected> <tc_name> <no_of_tc> <time> <tc_string> ] [ TABLE_BA_ports <port_name> ] [ <criteria1> ] [ <criteria2> ] [ TABLE_non_edge_ports <port> <vlan> <role> <sts> <tree> <instance> ] [ <criteria3> ] ]

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

issu-impact

Show whether STP meets ISSU criteria

__readonly__

(Optional)

TABLE_topology

(Optional)

tc_detected

(Optional)

tc_name

(Optional)

no_of_tc

(Optional)

time

(Optional)

tc_string

(Optional)

TABLE_BA_ports

(Optional)

port_name

(Optional)

TABLE_non_edge_ports

(Optional)

port

(Optional)

vlan

(Optional)

role

(Optional)

sts

(Optional)

tree

(Optional)

instance

(Optional)

criteria1

(Optional)

criteria2

(Optional)

criteria3

(Optional)

Command Mode

  • /exec

show spanning-tree mst

{ show spanning-tree mst [ <mst-id> ] [ __readonly__ TABLE_tree <tree_id> <tree_tree_type> <tree_protocol> <port_count> <bridge_mac> <bridge_priority> <tree_designated_root> <tree_designated_root_priority> <stp_active> <root_path_cost> <root_port_if_index> <root_port_priority> <root_port_number> <topology_change> <topology_change_detected> <topology_change_count> <topology_change_time_since_last> <tc_initiator_if_index> <bridge_forward_delay> <bridge_max_age> <bridge_hello_time> <max_age> <hello_time> <forward_delay> <hold_time> <hello_timer> <topology_change_timer> <tcn_timer> <aging_timer> <disabled> <blocking> <listening> <learning> <forwarding> <invalid> <ist-master-id-mac> <ist-master-prio> <ist-path-cost> <remaining-hops> <max-hops> <txholdcount> <tree-vlan-map> TABLE_port <if_index> <port_info_tree_id> <state> <role> <port_priority> <port_number> <port_protocol> <port_tree_type> <path_cost> <port_designated_root> <port_designated_root_priority> <designated_cost> <designated_bridge> <designated_bridge_priority> <designated_port> <tc_acknowledge> <forward_transition_count> <self_looped> <inconsistency> <bpdus_in> <bpdus_out> <port_fast> <link_type> <port_guard> <bpdu_guard> <bpdu_filter> <oper_portfast> <oper_p2p> <oper_loopguard> <oper_bpduguard> <oper_bpdufilter> <int_bpdufilter> [ <oper_networkport> ] <forward_delay_timer> <hold_timer> <message_age> <peer> <dispute> <pvstsim_inc_timer> <boundary> [ <simulate_pvst_cfg> ] <simulate_pvst> <prestd> [ <designated_ist_master> ] [ <designated_ist_master_priority> ] [ <designated_ist_cost> ] [ <vlan-map> ] ] } | { show spanning-tree mst [ <mst-id> ] detail [ __readonly__ TABLE_tree <tree_id> <tree_tree_type> <tree_protocol> <port_count> <bridge_mac> <bridge_priority> <tree_designated_root> <tree_designated_root_priority> <stp_active> <root_path_cost> <root_port_if_index> <root_port_priority> <root_port_number> <topology_change> <topology_change_detected> <topology_change_count> <topology_change_time_since_last> <tc_initiator_if_index> <bridge_forward_delay> <bridge_max_age> <bridge_hello_time> <max_age> <hello_time> <forward_delay> <hold_time> <hello_timer> <topology_change_timer> <tcn_timer> <aging_timer> <disabled> <blocking> <listening> <learning> <forwarding> <invalid> <ist-master-id-mac> <ist-master-prio> <ist-path-cost> <remaining-hops> <max-hops> <txholdcount> <tree-vlan-map> TABLE_port <if_index> <port_info_tree_id> <state> <role> <port_priority> <port_number> <port_protocol> <port_tree_type> <path_cost> <port_designated_root> <port_designated_root_priority> <designated_cost> <designated_bridge> <designated_bridge_priority> <designated_port> <tc_acknowledge> <forward_transition_count> <self_looped> <inconsistency> <bpdus_in> <bpdus_out> <port_fast> <link_type> <port_guard> <bpdu_guard> <bpdu_filter> <oper_portfast> <oper_p2p> <oper_loopguard> <oper_bpduguard> <oper_bpdufilter> <int_bpdufilter> [ <oper_networkport> ] <forward_delay_timer> <hold_timer> <message_age> <peer> <dispute> <pvstsim_inc_timer> <boundary> [ <simulate_pvst_cfg> ] <simulate_pvst> <prestd> [ <designated_ist_master> ] [ <designated_ist_master_priority> ] [ <designated_ist_cost> ] [ <vlan-map> ] ] }

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

mst

Multiple spanning trees

mst-id

(Optional) MST instance range, example: 0-3,5,7-9

detail

Detailed information

__readonly__

(Optional) Read Only

TABLE_tree

(Optional)

tree_id

(Optional) Tree Id

tree_tree_type

(Optional) Tree Type

tree_protocol

(Optional) Tree Protocol

port_count

(Optional) Number of Ports in Tree

bridge_mac

(Optional) Bridge Mac

bridge_priority

(Optional) Bridge Priority

tree_designated_root

(Optional) Designated Root Mac

tree_designated_root_priority

(Optional) Designated Root Priority

stp_active

(Optional) Spanning Tree State

root_path_cost

(Optional) Root Path Cost

root_port_if_index

(Optional) Root Port

root_port_priority

(Optional) Root Port Priority

root_port_number

(Optional) Root Port Number

topology_change

(Optional) Topology Change flag is set ?

topology_change_detected

(Optional) Topology Change detected flag is set ?

topology_change_count

(Optional) Topology Change Count

topology_change_time_since_last

(Optional) Time since last TC

tc_initiator_if_index

(Optional) Topology Change initiator port

max_age

(Optional) Max Age

hello_time

(Optional) Hello Time

forward_delay

(Optional) Forward delay

bridge_max_age

(Optional) Configured Bridge Max Age

bridge_hello_time

(Optional) Configured Hello Time

bridge_forward_delay

(Optional) Configured Forward Delay

hold_time

(Optional) Configured Hold Time

hello_timer

(Optional) Hello Timer Value

topology_change_timer

(Optional) Topology Change Timer Value

tcn_timer

(Optional) TCN Timer Value

aging_timer

(Optional) Ageing Timer Value

disabled

(Optional) Number of ports Disabled

blocking

(Optional) Number of ports Blocking

listening

(Optional) Number of ports Listening

learning

(Optional) Number of ports Learning

forwarding

(Optional) Number of ports Forwarding

invalid

(Optional) Number of ports Invalid

ist-master-id-mac

(Optional) IST Master ID MAC address

ist-master-prio

(Optional) IST Master ID priority

ist-path-cost

(Optional) IST path cost

remaining-hops

(Optional) Remaining hops

max-hops

(Optional) Max Hops

txholdcount

(Optional) TX Hold count

tree-vlan-map

(Optional) Bitmap of vlans mapped to tree

TABLE_port

(Optional)

if_index

(Optional) Interface

state

(Optional) STP Port State

role

(Optional) STP Port Role

port_priority

(Optional) Port priority

port_number

(Optional) Port Number

port_info_tree_id

(Optional) Tree Id

port_tree_type

(Optional) Tree Type

port_protocol

(Optional) Tree Protocol

path_cost

(Optional) Cost configured on this port

port_designated_root

(Optional) Designated Root Mac

port_designated_root_priority

(Optional) Designated Root Priority

designated_cost

(Optional) Designated cost

designated_bridge

(Optional) Designated bridge mac

designated_bridge_priority

(Optional) Designated bridge priority

designated_port

(Optional) Designated Port Id

tc_acknowledge

(Optional) Is topology change acknowledge flag set ?

forward_transition_count

(Optional) Port transitions to Forwarding

self_looped

(Optional) Is Port self looped ?

inconsistency

(Optional) PVST+ Inconsistency Error Flags

bpdus_in

(Optional) BPDUs received on this stp port

bpdus_out

(Optional) BPDUs send on this stp port

port_fast

(Optional) Port Fast configured on port

link_type

(Optional) Link type configured on this port

port_guard

(Optional) Port Guard mode of port

bpdu_guard

(Optional) Bpdu Guard mode configured

bpdu_filter

(Optional) Bpdu Filter mode configured

oper_portfast

(Optional) Is portfast enabled ?

oper_p2p

(Optional) Is port P2P ?

oper_loopguard

(Optional) Is loopguard enabled ?

oper_bpduguard

(Optional) Is bpduguard enabled ?

oper_bpdufilter

(Optional) Is bpdufilter enabled ?

int_bpdufilter

(Optional) Is internal bpdufilter enabled ?

forward_delay_timer

(Optional) Forward Delay timer

hold_timer

(Optional) Hold Timer

message_age

(Optional) Message age timer

peer

(Optional) STP protocol of the peer

boundary

(Optional) Is port boundary ?

simulate_pvst

(Optional) Is port is pvst simulate mode ?

dispute

(Optional) Is port Disputed ?

pvstsim_inc_timer

(Optional) PVST Simulation Inconsistency Hold Timer

prestd

(Optional) Is port Pre STD MST ?

designated_ist_master

(Optional) Ist master mac

designated_ist_master_priority

(Optional) Ist master priority

designated_ist_cost

(Optional) Ist master path cost

vlan-map

(Optional) Bitmap of vlans mapped to port

oper_networkport

(Optional) Is network port enabled ?

simulate_pvst_cfg

(Optional) PVST Simulation configured on port

Command Mode

  • /exec

show spanning-tree mst configuration

{ show spanning-tree mst configuration [ __readonly__ <stp-mode> <name> <rev-id> { TABLE_instance_to_vlan_map <mst_id> <vlan_bit_map> } [ <pvlan-sync> ] ] }

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

mst

Multiple spanning trees

configuration

MST current region configuration

__readonly__

(Optional) Read Only

stp-mode

(Optional) Spanning Tree operating mode

name

(Optional) Configuration name

rev-id

(Optional) Configuration revision number

TABLE_instance_to_vlan_map

(Optional) Instance to vlan mapping Info

mst_id

(Optional) MST Instance ID

vlan_bit_map

(Optional) VLAN Bitmap

pvlan-sync

(Optional) pvlan synchronization

Command Mode

  • /exec

show spanning-tree mst configuration digest

{ show spanning-tree mst configuration digest [ __readonly__ <stp-mode> <name> <rev-id> <digest> <prestd-digest> [ <pvlan-sync> ] ] }

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

mst

Multiple spanning trees

configuration

MST current region configuration

digest

Display MST configuration digest

__readonly__

(Optional) Read Only

stp-mode

(Optional) Spanning Tree operating mode

name

(Optional) Configuration name

rev-id

(Optional) Configuration revision number

digest

(Optional) MST region configuration digest

prestd-digest

(Optional) MST region configuration pre-std digest

pvlan-sync

(Optional) pvlan synchronization

Command Mode

  • /exec

show spanning-tree mst interface

{ show spanning-tree mst [ <mst-id> ] interface <interface-id> [ __readonly__ TABLE_port <if_index> <port_info_tree_id> <state> <role> <port_priority> <port_number> <port_protocol> <port_tree_type> <path_cost> <port_designated_root> <port_designated_root_priority> <designated_cost> <designated_bridge> <designated_bridge_priority> <designated_port> <tc_acknowledge> <forward_transition_count> <self_looped> <inconsistency> <bpdus_in> <bpdus_out> <port_fast> <link_type> <port_guard> <bpdu_guard> <bpdu_filter> <oper_portfast> <oper_p2p> <oper_loopguard> <oper_bpduguard> <oper_bpdufilter> <int_bpdufilter> [ <oper_networkport> ] <forward_delay_timer> <hold_timer> <message_age> <peer> <dispute> [ <pvstsim_inc_timer> ] <boundary> [ <simulate_pvst_cfg> ] <simulate_pvst> <prestd> [ <designated_ist_master> ] [ <designated_ist_master_priority> ] [ <designated_ist_cost> ] [ <vlan-map> ] ] } | { show spanning-tree mst [ <mst-id> ] interface <interface-id> detail [ __readonly__ TABLE_port <if_index> <port_info_tree_id> <state> <role> <port_priority> <port_number> <port_protocol> <port_tree_type> <path_cost> <port_designated_root> <port_designated_root_priority> <designated_cost> <designated_bridge> <designated_bridge_priority> <designated_port> <tc_acknowledge> <forward_transition_count> <self_looped> <inconsistency> <bpdus_in> <bpdus_out> <port_fast> <link_type> <port_guard> <bpdu_guard> <bpdu_filter> <oper_portfast> <oper_p2p> <oper_loopguard> <oper_bpduguard> <oper_bpdufilter> <int_bpdufilter> [ <oper_networkport> ] <forward_delay_timer> <hold_timer> <message_age> <peer> <dispute> [ <pvstsim_inc_timer> ] <boundary> [ <simulate_pvst_cfg> ] <simulate_pvst> <prestd> [ <designated_ist_master> ] [ <designated_ist_master_priority> ] [ <designated_ist_cost> ] [ <vlan-map> ] ] }

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

mst

Multiple spanning trees

mst-id

(Optional) MST instance range, example: 0-3,5,7-9

interface

Spanning Tree interface status and configuration

interface-id

Specify an interface as a target for the command

detail

Detailed information

__readonly__

(Optional) Read Only

TABLE_port

(Optional)

if_index

(Optional) Interface

port_info_tree_id

(Optional) Tree Id

state

(Optional) STP Port State

role

(Optional) STP Port Role

port_priority

(Optional) Port priority

port_number

(Optional) Port Number

port_tree_type

(Optional) Tree Type

port_protocol

(Optional) Tree Protocol

path_cost

(Optional) Cost configured on this port

port_designated_root

(Optional) Designated Root Mac

port_designated_root_priority

(Optional) Designated Root Priority

designated_cost

(Optional) Designated cost

designated_bridge

(Optional) Designated bridge mac

designated_bridge_priority

(Optional) Designated bridge priority

designated_port

(Optional) Designated Port Id

tc_acknowledge

(Optional) Is topology change acknowledge flag set ?

forward_transition_count

(Optional) Port transitions to Forwarding

self_looped

(Optional) Is Port self looped ?

inconsistency

(Optional) PVST+ Inconsistency Error Flags

bpdus_in

(Optional) BPDUs received on this stp port

bpdus_out

(Optional) BPDUs send on this stp port

port_fast

(Optional) Port Fast configured on port

link_type

(Optional) Link type configured on this port

port_guard

(Optional) Port Guard mode of port

bpdu_guard

(Optional) Bpdu Guard mode configured

bpdu_filter

(Optional) Bpdu Filter mode configured

oper_portfast

(Optional) Is portfast enabled ?

oper_p2p

(Optional) Is port P2P ?

oper_loopguard

(Optional) Is loopguard enabled ?

oper_bpduguard

(Optional) Is bpduguard enabled ?

oper_bpdufilter

(Optional) Is bpdufilter enabled ?

int_bpdufilter

(Optional) Is internal bpdufilter enabled ?

forward_delay_timer

(Optional) Forward Delay timer

hold_timer

(Optional) Hold Timer

message_age

(Optional) Message age timer

peer

(Optional) STP protocol of the peer

boundary

(Optional) Is port boundary ?

simulate_pvst

(Optional) Is port is pvst simulate mode ?

dispute

(Optional) Is port Disputed ?

prestd

(Optional) Is port Pre STD MST ?

designated_ist_master

(Optional) Ist master mac

designated_ist_master_priority

(Optional) Ist master priority

designated_ist_cost

(Optional) Ist master path cost

vlan-map

(Optional) Bitmap of vlans mapped to port

oper_networkport

(Optional) Is network port enabled ?

pvstsim_inc_timer

(Optional) PVST Simulation Inconsistency Hold Timer

simulate_pvst_cfg

(Optional) PVST Simulation configured on port

Command Mode

  • /exec

show spanning-tree pathcost method

{ show spanning-tree pathcost method [ __readonly__ <stp-pathcost-method> [ <stp-operpathcost-method> ] ] }

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

pathcost

Show Spanning pathcost options

method

Default pathcost calculation method

__readonly__

(Optional)

stp-pathcost-method

(Optional) STP Pathcost Method

stp-operpathcost-method

(Optional) STP Pathcost Method

Command Mode

  • /exec

show spanning-tree root

{ show spanning-tree [ vlan <vlan-id> | bridge-domain <bd-id> ] root [ priority [ system-id ] ] [ __readonly__ TABLE_tree <tree_id> <tree_tree_type> <tree_protocol> <tree_designated_root> <tree_designated_root_priority> <root_path_cost> <root_port_if_index> <root_port_priority> <root_port_number> <max_age> <hello_time> <forward_delay> ] } | { show spanning-tree [ vlan <vlan-id> | bridge-domain <bd-id> ] root [ { address | cost | forward-time | hello-time | id | max-age | port } ] [ __readonly__ TABLE_tree <tree_id> <tree_tree_type> <tree_protocol> <tree_designated_root> <tree_designated_root_priority> <root_path_cost> <root_port_if_index> <root_port_priority> <root_port_number> <max_age> <hello_time> <forward_delay> ] } | { show spanning-tree [ vlan <vlan-id> | bridge-domain <bd-id> ] root [ { detail | brief } ] [ __readonly__ TABLE_tree <tree_id> <tree_tree_type> <tree_protocol> <tree_designated_root> <tree_designated_root_priority> <root_path_cost> <root_port_if_index> <root_port_priority> <root_port_number> <max_age> <hello_time> <forward_delay> ] }

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

vlan

(Optional) VLAN Switch Spanning Trees

bridge-domain

(Optional) Bridge-Domain Switch Spanning Trees

vlan-id

(Optional) vlan range, Example: 1,3-5,7,9-11

bd-id

(Optional) Bridge-Domain range, Example: 2,4-5,7,9-11

root

Status and configuration of the root bridge

address

(Optional) Mac address of this bridge

cost

(Optional) Path cost from this bridge to the root

forward-time

(Optional) Forward delay interval

hello-time

(Optional) Hello time

id

(Optional) Spanning tree bridge identifier

max-age

(Optional) Max age

port

(Optional) Root port

brief

(Optional) Brief summary of interface information

detail

(Optional) Detailed information

priority

(Optional) Bridge priority of this bridge

system-id

(Optional) Spanning tree priority with system id extension

__readonly__

(Optional) Read Only

TABLE_tree

(Optional)

tree_id

(Optional) Tree Id

tree_tree_type

(Optional) Tree Type

tree_protocol

(Optional) Tree Protocol

tree_designated_root

(Optional) Designated Root Mac

tree_designated_root_priority

(Optional) Designated Root Priority

root_path_cost

(Optional) Root Path Cost

root_port_if_index

(Optional) Root Port

root_port_priority

(Optional) Root Port Priority

root_port_number

(Optional) Root Port Number

max_age

(Optional) Max Age

hello_time

(Optional) Hello Time

forward_delay

(Optional) Forward delay

Command Mode

  • /exec

show spanning-tree summary

show spanning-tree [ vlan <vlan-id> | bridge-domain <bd-id> ] summary [ __readonly__ <stp-mode> [ <stp_tree_root_info> <tree_type> <bridge_mac> <bridge_priority> <tree_designated_root> <tree_designated_root_priority> ] + [ <stp_root_bmp_info> <stp_root_tree_type> <tree_root_bmp> <stp_l2gstp_bmp_info> <stp_l2gstp_tree_type> [ <stp_l2gstp_bmp> ] ] <stp_global_info> <pcost_method> <oper_pcost_method> <port_fast> <bpdu_guard> <bpdu_filter> <oper_loopguard> <bridge_assurance> <networkport_default> <simulate_pvst> <max-hops> <peer_switch_cfg> <oper_peer_switch> <stp_l2gstp_domain_id> <stp_lite> [ TABLE_tree <stp_tree_summary> <summary_tree_type> <disabled> <blocking> <listening> <learning> <forwarding> <invalid> <port_count> ] [ <stp_summary_totals> <total_tree_type> <disabled> <blocking> <listening> <learning> <forwarding> <invalid> <port_count> ] ]

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

vlan

(Optional) VLAN Switch Spanning Trees

bridge-domain

(Optional) Bridge-Domain Switch Spanning Trees

vlan-id

(Optional) vlan range, Example: 1,3-5,7,9-11

bd-id

(Optional) Bridge-Domain range, Example: 2,4-5,7,9-11

summary

Summary of port states

__readonly__

(Optional) Read Only

stp-mode

(Optional) Spanning Tree operating mode

stp_tree_root_info

(Optional) STP Tree Root info marker

tree_type

(Optional) Tree Type

bridge_mac

(Optional) Bridge Mac

bridge_priority

(Optional) Bridge Priority

tree_designated_root

(Optional) Designated Root Mac

tree_designated_root_priority

(Optional) Designated Root Priority

stp_root_bmp_info

(Optional) STP root bitmap info marker

stp_root_tree_type

(Optional) Tree Type

tree_root_bmp

(Optional) STP tree root bmp

stp_l2gstp_bmp_info

(Optional) L2 Gateway STP bitmap marker

stp_l2gstp_tree_type

(Optional) Tree Type

stp_l2gstp_bmp

(Optional) L2 Gateway STP bitmap

stp_global_info

(Optional) STP global info marker

pcost_method

(Optional) STP pathcost method

oper_pcost_method

(Optional) STP oper pathcost method

port_fast

(Optional) Port Fast configured on port

bpdu_guard

(Optional) Bpdu Guard mode configured

bpdu_filter

(Optional) Bpdu Filter mode configured

oper_loopguard

(Optional) Is loopguard enabled ?

bridge_assurance

(Optional) Bridge Assurance

networkport_default

(Optional) Network Port default

simulate_pvst

(Optional) Is port is pvst simulate mode ?

max-hops

(Optional) Max Hops

peer_switch_cfg

(Optional) peer switch configuration status

oper_peer_switch

(Optional) peer switch operational status

stp_l2gstp_domain_id

(Optional) L2 Gateway STP Domain ID

stp_lite

(Optional) STP-Lite

TABLE_tree

(Optional)

stp_tree_summary

(Optional) STP Tree Summary

summary_tree_type

(Optional) Tree Type

disabled

(Optional) Number of ports Disabled

blocking

(Optional) Number of ports Blocking

listening

(Optional) Number of ports Listening

learning

(Optional) Number of ports Learning

forwarding

(Optional) Number of ports Forwarding

invalid

(Optional) Number of ports Invalid

port_count

(Optional) Number of Ports in Tree

stp_summary_totals

(Optional) Total num STP trees

total_tree_type

(Optional) Tree Type

disabled

(Optional) Number of ports Disabled

blocking

(Optional) Number of ports Blocking

listening

(Optional) Number of ports Listening

learning

(Optional) Number of ports Learning

forwarding

(Optional) Number of ports Forwarding

invalid

(Optional) Number of ports Invalid

port_count

(Optional) Number of Ports in Tree

Command Mode

  • /exec

show spanning-tree summary totals

show spanning-tree summary totals [ __readonly__ <stp-mode> <stp_tree_root_info> <tree_type> <bridge_mac> <bridge_priority> <tree_designated_root> <tree_designated_root_priority> <stp_root_bmp_info> <stp_root_tree_type> <tree_root_bmp> <stp_l2gstp_bmp_info> <stp_l2gstp_tree_type> <stp_l2gstp_bmp> <stp_global_info> <pcost_method> <oper_pcost_method> <port_fast> <bpdu_guard> <bpdu_filter> <oper_loopguard> <bridge_assurance> <networkport_default> <simulate_pvst> <max-hops> <peer_switch_cfg> <oper_peer_switch> <stp_l2gstp_domain_id> <stp_lite> <stp_summary_totals> <total_tree_type> <disabled> <blocking> <listening> <learning> <forwarding> <invalid> <port_count> ]

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

summary

Summary of port states

totals

Only show totals

__readonly__

(Optional) Read Only

stp-mode

(Optional) Spanning Tree operating mode

stp_tree_root_info

(Optional) STP Tree Root info marker

tree_type

(Optional) Tree Type

bridge_mac

(Optional) Bridge Mac

bridge_priority

(Optional) Bridge Priority

tree_designated_root

(Optional) Designated Root Mac

tree_designated_root_priority

(Optional) Designated Root Priority

stp_root_bmp_info

(Optional) STP root bitmap info marker

stp_root_tree_type

(Optional) Tree Type

tree_root_bmp

(Optional) STP tree root bmp

stp_l2gstp_bmp_info

(Optional) L2 Gateway STP bitmap marker

stp_l2gstp_tree_type

(Optional) Tree Type

stp_l2gstp_bmp

(Optional) L2 Gateway STP bitmap

stp_global_info

(Optional) STP global info marker

pcost_method

(Optional) STP pathcost method

oper_pcost_method

(Optional) STP oper pathcost method

port_fast

(Optional) Port Fast configured on port

bpdu_guard

(Optional) Bpdu Guard mode configured

bpdu_filter

(Optional) Bpdu Filter mode configured

oper_loopguard

(Optional) Is loopguard enabled ?

bridge_assurance

(Optional) Bridge Assurance

networkport_default

(Optional) Network Port default

simulate_pvst

(Optional) Is port is pvst simulate mode ?

max-hops

(Optional) Max Hops

peer_switch_cfg

(Optional) peer switch configuration status

oper_peer_switch

(Optional) peer switch operational status

stp_l2gstp_domain_id

(Optional) L2 Gateway STP Domain ID

stp_lite

(Optional) STP-Lite

stp_summary_totals

(Optional) Total num STP trees

total_tree_type

(Optional) Tree Type

disabled

(Optional) Number of ports Disabled

blocking

(Optional) Number of ports Blocking

listening

(Optional) Number of ports Listening

learning

(Optional) Number of ports Learning

forwarding

(Optional) Number of ports Forwarding

invalid

(Optional) Number of ports Invalid

port_count

(Optional) Number of Ports in Tree

Command Mode

  • /exec

show sprom

show sp