V Show Commands

show vdc

{ show vdc [ <e-vdc2> ] [ feature-set | detail | membership [ all | status | module <module> ] | shared membership ] [ __readonly__ [ detail2 ] [ <swmode> ] { TABLE_vdc <vdc_id> <vdc_name> <state> <mac> <hap> <sw> <boot_order> [ <prio> <prio_per> ] [ <create_time> ] [ <reload_count> ] [ <restart_count> ] [ <restart_time> ] [ <restart_reason> ] <vtype> <lc-support> [ TABLE_fs <fs_id> <fs_name> ] [ TABLE_port <port-list> ] } ] }

Syntax Description

show

Show Virtual Device Contexts

vdc

Show Virtual Device Contexts

e-vdc2

(Optional) Enter Virtual Device Context <vdc-id>

detail

(Optional) Show detailed vdc information

membership

(Optional) Show vdc interface membership information

shared

(Optional) Show the shared interfaces in a vdc

membership

(Optional) Show the shared interfaces in a vdc

module

(Optional) Show vdc interface membership information for a specific module only

module

(Optional) Show vdc interface membership information for a specific module only

status

(Optional) Show vdc related port-status

feature-set

(Optional) Show vdc feature-set information

all

(Optional) Show offline modules as well

__readonly__

(Optional) Read Only

detail2

(Optional)

swmode

(Optional)

TABLE_vdc

(Optional)

vdc_id

(Optional) vdc-id

TABLE_port

(Optional)

port-list

(Optional) port membership for VDC

vdc_name

(Optional) vdc-name

state

(Optional) state

mac

(Optional) mac address for VDC

hap

(Optional) hap policy

sw

(Optional) sw policy

vtype

(Optional)

lc-support

(Optional)

create_time

(Optional)

reload_count

(Optional)

restart_count

(Optional)

restart_time

(Optional)

restart_reason

(Optional)

TABLE_fs

(Optional)

fs_id

(Optional) fs id

fs_name

(Optional)

boot_order

(Optional)

prio

(Optional)

prio_per

(Optional)

Command Mode

  • /exec

show vdc current-vdc

show vdc current-vdc [ __readonly__ <mode> <name> ]

Syntax Description

show

Show Virtual Device Contexts

vdc

Show Virtual Device Contexts

current-vdc

Show which vdc you are currently in

__readonly__

(Optional) Read Only

mode

(Optional) cli mode

name

(Optional) vdc name

Command Mode

  • /exec

show vdc fcoe-vlan-range

show vdc fcoe-vlan-range [ __readonly__ <fcoe-vdc> [ <fcoe-vlans> ] [ <sharing-vdcs> ] ]

Syntax Description

show

Show Virtual Device Contexts

vdc

Show Virtual Device Contexts

fcoe-vlan-range

vlans reserved for FCoE

__readonly__

(Optional) Read Only

fcoe-vdc

(Optional)

sharing-vdcs

(Optional)

fcoe-vlans

(Optional)

Command Mode

  • /exec

show vdc resource

show vdc <id> resource [ <res-mgr-res-known-name> ] [ __readonly__ { TABLE_vdc_resource_single_vdc <res_name> <min> <max> <used> <unused> <free> } ]

Syntax Description

show

Show running system information

vdc

Show Virtual Device Contexts

id

Enter Virtual Device Context <vdc-id>

resource

Show resource configuration for VDC

res-mgr-res-known-name

(Optional) Resource name

__readonly__

(Optional) Read Only

res_name

(Optional) Resource Name

min

(Optional) Resource min configuration

max

(Optional) Resource max configuration

used

(Optional) Resource current usage for this VDC

unused

(Optional) Resource reserved for this VDC but currently not used

free

(Optional) Resource current free for this VDC

TABLE_vdc_resource_single_vdc

(Optional)

Command Mode

  • /exec

show vdc resource

show vdc resource [ <res-mgr-res-known-name> ] [ detail | hidden-too | with-flags ] + [ __readonly__ { TABLE_resource <resource_name> <total_used> <total_unused> <total_free> <total_avail> <total> [ TABLE_vdc_resource_across_vdcs <vdc_name> <min> <max> <used> <unused> <free> ] } ]

Syntax Description

show

Show running system information

vdc

Show Virtual Device Contexts

resource

Show resource configuration across VDCs

res-mgr-res-known-name

(Optional) Resource name

detail

(Optional) Show detail resource configuration

hidden-too

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

with-flags

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

__readonly__

(Optional) Read Only

TABLE_resource

(Optional)

resource_name

(Optional) Resource Name

total_used

(Optional) Resource current usage for all VDC

total_unused

(Optional) Resources currently reserved but not used across all VDC

total_free

(Optional) Resource current free for all VDC

total_avail

(Optional) Resource current available across all VDC

total

(Optional) Resources grand total

TABLE_vdc_resource_across_vdcs

(Optional)

vdc_name

(Optional) VDC name

min

(Optional) Resource min configuration

max

(Optional) Resource max configuration

used

(Optional) Resource current usage for this VDC

unused

(Optional) Resource reserved for this VDC but currently not used

free

(Optional) Resource current free for this VDC

Command Mode

  • /exec

show vdc resource template

show vdc resource template [ <res-mgr-template-known-name-all> ] [ __readonly__ TABLE_template <template_name> { TABLE_resource <resource_name> <min> <max> } ]

Syntax Description

show

Show running system information

vdc

Show Virtual Device Contexts

resource

Show resource configuration for VDC

template

Resource template configuration

res-mgr-template-known-name-all

(Optional) Resource template name

__readonly__

(Optional) Read Only

TABLE_template

(Optional)

template_name

(Optional) Resource Template Name

TABLE_resource

(Optional)

resource_name

(Optional) Resource Name

min

(Optional) Resource min configuration

max

(Optional) Resource max configuration

Command Mode

  • /exec

show version

show version [ __readonly__ <header_str> <bios_ver_str> [ <epld_ver_str> ] [ <loader_ver_str> ] <kickstart_ver_str> <release_type> <nxos_ver_str> [ <sys_ver_str> ] <bios_cmpl_time> <kick_file_name> <nxos_file_name> <kick_cmpl_time> <nxos_cmpl_time> <kick_tmstmp> <nxos_tmstmp> [ <isan_file_name> ] [ <isan_cmpl_time> ] [ <isan_tmstmp> ] [ <boot_lxc_mode> ] <chassis_id> [ <module_id> ] <cpu_name> <memory> <mem_type> <proc_board_id> <host_name> <bootflash_size> [ <slot0_size> ] [ <slot1_size> ] <kern_uptm_days> <kern_uptm_hrs> <kern_uptm_mins> <kern_uptm_secs> [ <rr_usecs> ] [ <rr_ctime> ] <rr_reason> <rr_sys_ver> <rr_service> <plugins> <manufacturer> [ TABLE_smu_list <install_smu_id> + ] [ TABLE_package_list <package_id> + ] ]

Syntax Description

show

version

Show the software version

__readonly__

(Optional)

header_str

(Optional)

bios_ver_str

(Optional)

epld_ver_str

(Optional)

loader_ver_str

(Optional)

kickstart_ver_str

(Optional)

nxos_ver_str

(Optional)

release_type

(Optional)

sys_ver_str

(Optional)

bios_cmpl_time

(Optional)

kick_file_name

(Optional)

nxos_file_name

(Optional)

kick_cmpl_time

(Optional)

nxos_cmpl_time

(Optional)

kick_tmstmp

(Optional)

nxos_tmstmp

(Optional)

isan_file_name

(Optional)

isan_cmpl_time

(Optional)

isan_tmstmp

(Optional)

boot_lxc_mode

(Optional)

chassis_id

(Optional)

module_id

(Optional)

cpu_name

(Optional)

memory

(Optional)

mem_type

(Optional)

proc_board_id

(Optional)

host_name

(Optional)

bootflash_size

(Optional)

slot0_size

(Optional)

slot1_size

(Optional)

kern_uptm_days

(Optional)

kern_uptm_hrs

(Optional)

kern_uptm_mins

(Optional)

kern_uptm_secs

(Optional)

rr_usecs

(Optional)

rr_ctime

(Optional)

rr_reason

(Optional)

rr_sys_ver

(Optional)

rr_service

(Optional)

plugins

(Optional)

manufacturer

(Optional)

TABLE_smu_list

(Optional)

install_smu_id

(Optional)

TABLE_package_list

(Optional)

package_id

(Optional) Package name

Command Mode

  • /exec

show version epld

show version epld <uri0> [ __readonly__ <image-info> [ { TABLE_module_info <module-type> <model> <epld-device> <version> } ] ]

Syntax Description

show

Show running system information

version

Show the software version

epld

Show EPLD versions available in EPLD image

uri0

Local URI containing EPLD Image

__readonly__

(Optional)

image-info

(Optional) image file info

TABLE_module_info

(Optional)

module-type

(Optional) module type

model

(Optional) model

epld-device

(Optional) epld device

version

(Optional) version

Command Mode

  • /exec

show version image

show version image <uri0> [ __readonly__ <md5_str> <img_file_name> [ <bios_ver_str> ] <sys_ver_str> <img_cmpl_time> [ <img_tmstmp> ] ]

Syntax Description

show

Show running system information

version

Show the software version

image

Show the software version of a given image

uri0

Enter URI

__readonly__

(Optional)

md5_str

(Optional)

img_file_name

(Optional)

bios_ver_str

(Optional)

sys_ver_str

(Optional)

img_cmpl_time

(Optional)

img_tmstmp

(Optional)

Command Mode

  • /exec

show version module

show version module <module> [ __readonly__ { TABLE_version <slot> <type> <sw> <interim> <bios> } ]

Syntax Description

show

Show running system information

version

Show the software version

module

Show the software version of a Module

module

Enter module number

__readonly__

(Optional)

TABLE_version

(Optional) Show version info

slot

(Optional) Slot

type

(Optional) image type

sw

(Optional) SW version

interim

(Optional) SW interim version

bios

(Optional) BIOS version

Command Mode

  • /exec

show version module epld

show version module <module> epld [ __readonly__ { [ <header_info> ] [ <module> ] [ <mi_iofpga> <version> ] [ <io_fpga> <version> ] [ <mi_iofpga2> <version> ] [ <mi_iofpga3> <version> ] [ <mi_iofpga4> <version> ] [ <mi_iofpga5> <version> ] [ <mi_iofpga6> <version> ] [ <mi_iofpga7> <version> ] [ <mi_iofpga8> <version> ] [ <cpu_iofpga> <version> ] [ <db_fpga> <version> ] } ]

Syntax Description

show

Show running system information

version

Show the software version

module

Show the software version of a Module

module

Enter module number

epld

Show a module's current EPLD versions

__readonly__

(Optional)

header_info

(Optional)

module

(Optional)

mi_iofpga

(Optional)

io_fpga

(Optional)

mi_iofpga2

(Optional)

mi_iofpga3

(Optional)

mi_iofpga4

(Optional)

mi_iofpga5

(Optional)

mi_iofpga6

(Optional)

mi_iofpga7

(Optional)

mi_iofpga8

(Optional)

cpu_iofpga

(Optional)

db_fpga

(Optional)

version

(Optional)

Command Mode

  • /exec

show virtual-service

show virtual-service [ { list } | { global } | { detail [ name <virt_serv_name> ] } | { core [ name <virt_serv_name_core> ] } ] [ __readonly__ [ <infrastructure_major_version> <infrastructure_minor_version> <total_virtual_services_installed> <total_virtual_services_activated> <machine_types_supported> <machine_types_disabled> <maximum_vcpus_per_virtual_service> TABLE_resource_limits <media_name> <quota> <committed> <available> ] [ TABLE_list <name> <status> <package_name> ] [ TABLE_detail <name> <state> <package_name> <ova_path> <application_name> <application_version> <application_description> <key_type> <signing_method> <licensing_name> <licensing_version> <disk_reservation> <memory_reservation> <cpu_reservation> TABLE_attached_devices <type> <name> <alias> ] [ TABLE_core <name> <name_core> ] ]

Syntax Description

show

Show running system information

virtual-service

Display virtualization service information

global

(Optional) Virtual service global information

list

(Optional) List virtual services

detail

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

core

(Optional) Core information

name

(Optional) Information for a specific virtual service

virt_serv_name

(Optional) Name of a virtual service

virt_serv_name_core

(Optional) Name of a virtual service

__readonly__

(Optional) Read Only

infrastructure_major_version

(Optional) Infrastructure major version

infrastructure_minor_version

(Optional) Infrastructure minor version

total_virtual_services_installed

(Optional) Total virtual services installed

total_virtual_services_activated

(Optional) Total virtual services activated

maximum_vcpus_per_virtual_service

(Optional) Maximum VCPUs per virtual service

machine_types_supported

(Optional) Machine types supported

machine_types_disabled

(Optional) Machine types disabled

TABLE_resource_limits

(Optional) Virtual service global resource limits

media_name

(Optional) Resource name

quota

(Optional) Resource Virtualization quota

committed

(Optional) Resource Virtualization committed

available

(Optional) Resource Virtualization available

TABLE_list

(Optional) Virtual service list table

name

(Optional) Virtual service name

status

(Optional) Virtual service status

package_name

(Optional) Virtual service package name

TABLE_detail

(Optional) Virtual service detail table

name

(Optional) Virtual service name

package_name

(Optional) Virtual service package name

application_name

(Optional) Name of the application

application_version

(Optional) Version of the application

application_description

(Optional) Description of the application

key_type

(Optional) Virtual service key type

signing_method

(Optional) Method used to sign the package

licensing_name

(Optional) Name of the license

licensing_version

(Optional) Version of the license

ova_path

(Optional) Virtual service OVA path

state

(Optional) Virtual service state

disk_reservation

(Optional) Virtual service disk reservation

memory_reservation

(Optional) Virtual service memory reservation

cpu_reservation

(Optional) Virtual service CPU reservation

TABLE_attached_devices

(Optional) Attached devices table

type

(Optional) Type of the attached device

name

(Optional) Name of the attached device

alias

(Optional) Alias for the attached device

TABLE_core

(Optional) Virtual service core table

name

(Optional) Virtual service name

name_core

(Optional) Name of core

Command Mode

  • /exec

show virtual-service storage pool list

show virtual-service storage pool list [ __readonly__ [ TABLE_storage <pool_name> <pool_type> <pool_path> ] ]

Syntax Description

show

Show running system information

virtual-service

Display virtualization service storage pool information

storage

Storage information about virtual service

pool

Storage pool information about virtual service

list

List storage pool for virtual service

__readonly__

(Optional) Read Only

TABLE_storage

(Optional) Virtual service storage pool list table

pool_name

(Optional) Virtual service storage pool name

pool_type

(Optional) Virtual service storage pool type

pool_path

(Optional) Virtual service storage pool path

Command Mode

  • /exec

show virtual-service tech-support

show virtual-service tech-support

Syntax Description

show

Show running system information

virtual-service

Gather information for virtualization services trouble shooting

tech-support

Gather information for trouble shooting

Command Mode

  • /exec

show virtual-service utilization name

show virtual-service utilization name <virt_serv_name> [ __readonly__ [ TABLE_cpu <request> <actual> <state> ] [ TABLE_memory <allocation> <used> ] [ TABLE_storage <name> <alias> <capacity> <used> <available> <usage> ] ]

Syntax Description

show

Show running system information

virtual-service

Display virtualization service utilization information

utilization

Utilization information about virtual service

name

Utilization of a virtual service

virt_serv_name

Name of a virtual service

__readonly__

(Optional) Read Only

TABLE_storage

(Optional) Virtual service storage utilization

name

(Optional) storage device name

alias

(Optional) storage device alias

capacity

(Optional) Capacity 1k blocks

used

(Optional) Used 1k blocks

available

(Optional) Available 1k blocks

usage

(Optional) Usage

TABLE_memory

(Optional) Virtual service memory utilization

allocation

(Optional) Memory allocation

used

(Optional) Memory used

TABLE_cpu

(Optional) Virtual service cpu utilization

request

(Optional) Requested Application Utilization

actual

(Optional) Actual Application Utilization

state

(Optional) CPU state

Command Mode

  • /exec

show virtual-service version

show virtual-service version { { installed } | { name <virt_serv_name> installed } } [ __readonly__ <virt_service_name> <application_name> <application_version> ]

Syntax Description

show

Show running system information

virtual-service

Display virtualization service version information

version

Version information about virtual service

installed

Installed version

name

Version of a virtual service

virt_serv_name

Name of a virtual service

__readonly__

(Optional) Read Only

virt_service_name

(Optional) Virtual service name

application_name

(Optional) Application name

application_version

(Optional) Application version

Command Mode

  • /exec

show vlan

show vlan [ controller ] [ __readonly__ <vlanshowbr-hdr> { TABLE_vlanbrief <vlanshowbr-vlanid> <vlanshowbr-vlanid-utf> <vlanshowbr-vlanname> <vlanshowbr-vlanstate> <vlanshowbr-shutstate> [ <vlanshowplist-ifidx> + ] } <vlanshowinfo-mtu-hdr> { TABLE_mtuinfo <vlanshowinfo-vlanid> <vlanshowinfo-media-type> <vlanshowinfo-vlanmode> } [ <vlanshowrspan-hdr1> ] [ <vlanshowrspan-vlantype> ] [ <vlanshowrspan-hdr2> ] [ <vlanshowrspan-vlanbitmap> ] [ <pvlan-hdr> ] [ <pvlan-section> ] [ <pvlan-stby> ] <show-end> [ <true-end> ] ]

Syntax Description

show

Show running system information

vlan

VLAN status

controller

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

__readonly__

(Optional) Read Only

TABLE_vlanbrief

(Optional) VLAN brief table format

TABLE_mtuinfo

(Optional) MTU information table format

vlanshowbr-hdr

(Optional) VLAN brief header

vlanshowbr-vlanid

(Optional) VLAN brief VLAN ID

vlanshowbr-vlanid-utf

(Optional) VLAN brief VLAN ID

vlanshowbr-vlanname

(Optional) VLAN brief VLAN name

vlanshowbr-vlanstate

(Optional) VLAN brief VLAN state

vlanshowbr-shutstate

(Optional) VLAN brief shutdown state

vlanshowplist-ifidx

(Optional) Port list ifindex

vlanshowinfo-mtu-hdr

(Optional) Vlan info mtu header

vlanshowinfo-vlanid

(Optional) Vlan info VLAN ID

vlanshowinfo-media-type

(Optional) Select media type

vlanshowinfo-vlanmode

(Optional) VLAN brief VLAN mode

vlanshowrspan-hdr1

(Optional) RSPAN VLAN header for one VLAN

vlanshowrspan-hdr2

(Optional) RSPAN VLAN header for multiple VLANs

vlanshowrspan-vlantype

(Optional) RSPAN VLAN one VLAN rspan or non-rspan

vlanshowrspan-vlanbitmap

(Optional) RSPAN VLAN multiple VLANs

show-end

(Optional) Show vlan end marker

true-end

(Optional) Show vlan end marker

pvlan-hdr

(Optional) private vlan section

pvlan-section

(Optional) private vlan section

pvlan-stby

(Optional) private vlan section on standby

Command Mode

  • /exec

show vlan access-list

show vlan access-list <name> [ <inp_seqno> ] [ __readonly__ TABLE_vacl <vacl_name> [ <vacl_seqno> ] [ TABLE_list <ip_ipv6_mac> <acl_name> [ TABLE_seqno <seqno> { <permitdeny> [ <proto_str> | <proto> | <ip> | <ipv6> ] { <src_any> | <src_ip_prefix> | <src_ip_addr> <src_ip_mask> | <src_ipv6_prefix> | <src_ipv6_addr> <src_ipv6_mask> | <mac_src> <mac_src_wild> | <src_addrgrp> } [ <src_port_op> [ <src_port1_str> ] { <src_port1_num> } [ <src_port2_str> | <src_port2_num> ] | <src_portgrp> ] { <dest_any> | <dest_ip_prefix> | <dest_ip_addr> <dest_ip_mask> | <dest_ipv6_prefix> | <dest_ipv6_addr> <dest_ipv6_mask> | <mac_dest> <mac_dest_wild> | <dest_addrgrp> } [ <dest_port_op> [ <dest_port1_str> ] { <dest_port1_num> } [ <dest_port2_str> | <dest_port2_num> ] | <dest_portgrp> ] [ { <icmp_type> [ <icmp_code> ] | <icmp_str> } | { <icmpv6_type> [ <icmpv6_code> ] | <icmpv6_str> } ] [ <igmp_type> | <igmp_type_str> ] [ [ <precedence> | <precedence_str> ] [ <tos> | <tos_str> ] | [ <dscp> [ <dscp_mask> ] | <dscp_str> ] | [ <ttl> ] ] [ <log> ] [ <telemetry_queue> ] [ <telemetry_path> ] [ <udfs> ] [ <capture_session> ] [ <fragments> ] [ <plen_op> <plen1> [ <plen2> ] ] [ <urg> ] [ <ack> ] [ <psh> ] [ <rst> ] [ <syn> ] [ <fin> ] [ <established> ] [ <http-method> | <http_opt_str> ] [ <tcp-option-length> ] [ <tcp-flags-mask> ] [ <flow_label> ] [ <timerange> ] [ <eth_proto> | <eth_proto_str> ] [ <vlan> ] [ <cos> ] [ <match_count> ] | [ TABLE_match <module> <module_match_count> ] | [ <nve_vni> ] | [ <nve_vni> ] | [ <label1> [ <label2> <label3> <label4> ] ] <remark> } ] [ <action> <actionid> ] ] ]

Syntax Description

show

Show running system information

vlan

VLAN status

access-list

Vlan access list

name

List name

inp_seqno

(Optional) Sequence number

vacl_name

(Optional) List name

__readonly__

(Optional)

vacl_seqno

(Optional) Sequence number

TABLE_vacl

(Optional)

TABLE_list

(Optional)

ip_ipv6_mac

(Optional) IP/iIPV6/MAC

acl_name

(Optional) Access list name

seqno

(Optional) Sequence number

permitdeny

(Optional) Permit/deny

proto

(Optional) A protocol number

TABLE_seqno

(Optional)

proto_str

(Optional) Protocol name

ip

(Optional) IP

ipv6

(Optional) IPV6

src_any

(Optional) SRCAny

dest_any

(Optional) DESTAny

src_ip_prefix

(Optional) Source IP prefix

src_ip_addr

(Optional) Source IP address

src_ip_mask

(Optional) Source IP mask

mac_src

(Optional) Source MAC address

mac_src_wild

(Optional) Source MAC mask

dest_ip_prefix

(Optional) Destination IP prefix

dest_ip_addr

(Optional) Destination IP address

dest_ip_mask

(Optional) Destination IP mask

mac_dest

(Optional) Destination MAC address

mac_dest_wild

(Optional) Destination MAC mask

src_port_op

(Optional) Source Port operator

dest_port_op

(Optional) Destination Port operator

src_port1_str

(Optional) Source port name

src_port1_num

(Optional) Source port number

src_port2_str

(Optional) Source port name

src_port2_num

(Optional) Source port number

dest_port1_str

(Optional) Destination port name

dest_port1_num

(Optional) Destination port number

dest_port2_str

(Optional) Destination port name

dest_port2_num

(Optional) Destination port number

icmp_type

(Optional) ICMP type

icmp_code

(Optional) ICMP code

icmp_str

(Optional) ICMP message

icmpv6_type

(Optional) ICMP type

icmpv6_code

(Optional) ICMP code

icmpv6_str

(Optional) ICMP message

igmp_type

(Optional) IGMP type

igmp_type_str

(Optional) IGMP type String

precedence

(Optional) precedence

precedence_str

(Optional) precedence string

tos

(Optional) tos

tos_str

(Optional) tos string

dscp

(Optional) dscp

dscp_mask

(Optional) dscp mask

dscp_str

(Optional) dscp string

udfs

(Optional) udfs string

ttl

(Optional) ttl

capture_session

(Optional) capture session

log

(Optional) Log

telemetry_queue

(Optional) telemetry_queue

telemetry_path

(Optional) telemetry_path

fragments

(Optional) Fragments

urg

(Optional) URG

ack

(Optional) ACK

psh

(Optional) PSH

rst

(Optional) RST

syn

(Optional) SYN

fin

(Optional) FIN

established

(Optional) ESTABLISHED

http-method

(Optional) http-method

http_opt_str

(Optional) http_option string

tcp-option-length

(Optional) TCP Option size

tcp-flags-mask

(Optional) TCP Flags mask

flow_label

(Optional) IPv6 flow label

timerange

(Optional) Time-range

eth_proto

(Optional) MAC protocol number

eth_proto_str

(Optional) MAC protocol name

vlan

(Optional) VLAN number

cos

(Optional) CoS value

match_count

(Optional) Number of packets matching the ACL

TABLE_match

(Optional)

module

(Optional) Module name

module_match_count

(Optional) Number of packets matching the ACL

nve_vni

(Optional) nve vni

remark

(Optional) Remark String

src_addrgrp

(Optional) Source address group

dest_addrgrp

(Optional) Destination address group

src_portgrp

(Optional) Source port group

dest_portgrp

(Optional) Destination port group

plen_op

(Optional) Source Port operator

plen1

(Optional) Packet length minimum

plen2

(Optional) packet length maximum

label1

(Optional) mpls label one

label2

(Optional) mpls label two

label3

(Optional) mpls label three

label4

(Optional) mpls label four

action

(Optional) Action

actionid

(Optional) redirect: Ethernet1/1,port-channel1 set-erspan-dscp: <1-63> set-erspan-gre-proto: <1-65535>

Command Mode

  • /exec

show vlan access-map

show vlan access-map [ <name> ] [ __readonly__ [ TABLE_vacl <vacl_name> [ TABLE_seqno [ <seqno> ] [ <ip_ipv6_mac> { <match_name> } + [ <action_drop> ] [ <action_log> ] [ <action_telemetry_queue> ] [ <action_telemetry_path> ] [ <action_fwd> ] [ <action_capture> ] [ <action_redirect> <intf> ] ] [ <statistics> ] ] ] ]

Syntax Description

show

Show running system information

vlan

VLAN status

access-map

List VLAN access maps

name

(Optional) List name

vacl_name

(Optional) List name

__readonly__

(Optional)

seqno

(Optional) Sequence number

TABLE_vacl

(Optional)

TABLE_seqno

(Optional)

ip_ipv6_mac

(Optional) IP/iIPV6/MAC

match_name

(Optional) Access list name

action_drop

(Optional) DROP

action_log

(Optional) LOG

action_telemetry_queue

(Optional) telemetry_queue

action_telemetry_path

(Optional) telemetry_path

action_fwd

(Optional) FWD

action_capture

(Optional) CAPTURE

action_redirect

(Optional) REDIRECT

intf

(Optional) Interface traffic is redirected to

statistics

(Optional) STATISTICS

Command Mode

  • /exec

show vlan all-ports

show vlan all-ports [ __readonly__ <vlanshowbr-hdr> { TABLE_vlanbriefallports <vlanshowbr-vlanid> <vlanshowbr-vlanid-utf> <vlanshowbr-vlanname> <vlanshowbr-vlanstate> <vlanshowbr-shutstate> [ <vlanshowplist-ifidx> + ] } <show-end> [ <true-end> ] ]

Syntax Description

show

Show running system information

vlan

VLAN status

all-ports

Show all ports on VLAN

__readonly__

(Optional) Read Only

TABLE_vlanbriefallports

(Optional) VLAN brief table format

vlanshowbr-hdr

(Optional) VLAN brief header

vlanshowbr-vlanid

(Optional) VLAN brief VLAN ID

vlanshowbr-vlanid-utf

(Optional) VLAN brief VLAN ID

vlanshowbr-vlanname

(Optional) VLAN brief VLAN name

vlanshowbr-vlanstate

(Optional) VLAN brief VLAN state

vlanshowbr-shutstate

(Optional) VLAN brief shutdown state

vlanshowplist-ifidx

(Optional) Port list ifindex

show-end

(Optional) Show vlan end marker

true-end

(Optional) Show vlan end marker

Command Mode

  • /exec

show vlan counters

show vlan counters [ __readonly__ { TABLE_vlancounters <vlanshowbr-vlanid> [ <l2_ing_ucast_b> ] [ <l2_ing_ucast_p> ] [ <l2_ing_mcast_b> ] [ <l2_ing_mcast_p> ] [ <l2_ing_bcast_b> ] [ <l2_ing_bcast_p> ] [ <l2_egr_ucast_b> ] [ <l2_egr_ucast_p> ] [ <l3_ucast_rcv_b> ] [ <l3_ucast_rcv_p> ] [ <total_rcv_b> ] [ <total_rcv_p> ] [ <total_sent_b> ] [ <total_sent_p> ] } ]

Syntax Description

show

Show running system information

vlan

Vlan commands

counters

display counters

__readonly__

(Optional) Read Only

TABLE_vlancounters

(Optional) vlan counters table format

vlanshowbr-vlanid

(Optional) VLAN brief VLAN ID

l2_ing_ucast_b

(Optional) L2 Ingress unicast octets

l2_ing_ucast_p

(Optional) L2 Ingress unicast packets

l2_ing_mcast_b

(Optional) L2 Ingress multicast octets

l2_ing_mcast_p

(Optional) L2 Ingress multicast packets

l2_ing_bcast_b

(Optional) L2 Ingress broadcast octets

l2_ing_bcast_p

(Optional) L2 Ingress broadcast packets

l2_egr_ucast_b

(Optional) L2 Egress unicast octets

l2_egr_ucast_p

(Optional) L2 Egress unicast packets

l3_ucast_rcv_b

(Optional) L3 unicast octets in

l3_ucast_rcv_p

(Optional) L3 unicast packets in

total_rcv_b

(Optional) Total octets in

total_rcv_p

(Optional) Total packets in

total_sent_b

(Optional) Total octets out

total_sent_p

(Optional) Total packets out

Command Mode

  • /exec

show vlan dot1Q tag native

show vlan dot1Q tag native [ __readonly__ <tag_native_mode> ]

Syntax Description

show

Show running system information

vlan

VTP VLAN status

dot1Q

Display dot1q parameters

tag

Display tag parameters

native

Display native vlan tagging

__readonly__

(Optional) Read Only

tag_native_mode

(Optional) Native vlan tagging mode

Command Mode

  • /exec

show vlan fcoe

show vlan fcoe [ <vlan-id> ] [ __readonly__ { TABLE_assoc <orig-id> <tran-id> <assoc-state> } ]

Syntax Description

show

Show running system information

fcoe

FCOE Congiguration

vlan

Original VLAN Status

__readonly__

(Optional) Read Only

TABLE_assoc

(Optional) Association Table Format

vlan-id

(Optional) VLAN ID <1-4094>

orig-id

(Optional) Enter original VLAN-ID being associated with translated ID

tran-id

(Optional) Enter VSAN-ID being associated with VLAN-ID

assoc-state

(Optional) Show Association Status

Command Mode

  • /exec

show vlan filter

show vlan filter [ access-map <name> | vlan <vlan> ] [ __readonly__ TABLE_vlan_filter <vacl_name> <configured_vlans> ]

Syntax Description

show

Show running system information

vlan

VLAN status

filter

Information about VLAN filters

access-map

(Optional) Show the VLANs where an access-map is applied

name

(Optional) List name

vlan

(Optional) Show the access-map applied to a VLAN

vlan

(Optional) VLAN number

__readonly__

(Optional)

TABLE_vlan_filter

(Optional)

vacl_name

(Optional) List name

configured_vlans

(Optional) VLAN numbers

Command Mode

  • /exec

show vlan id

show vlan id <vlan-id> [ __readonly__ <vlanshowbr-hdr> { TABLE_vlanbriefid <vlanshowbr-vlanid> <vlanshowbr-vlanid-utf> <vlanshowbr-vlanname> <vlanshowbr-vlanstate> <vlanshowbr-shutstate> [ <vlanshowplist-ifidx> + ] } <vlanshowinfo-mtu-hdr> { TABLE_mtuinfoid <vlanshowinfo-vlanid> <vlanshowinfo-media-type> <vlanshowinfo-vlanmode> } [ <vlanshow-vlanerrbitmap> ] [ <vlanshowrspan-hdr1> ] [ <vlanshowrspan-vlantype> ] [ <vlanshowrspan-hdr2> ] [ <vlanshowrspan-vlanbitmap> ] [ <pvlan-hdr> ] [ <pvlan-id-section> ] [ <pvlan-stby> ] [ <is-vtp-manageable> ] [ <is-internal> ] [ <is-reserved> ] [ <is-rspan> ] [ <is-dynamic-gvrp> ] <show-end> [ <true-end> ] ]

Syntax Description

show

Show running system information

vlan

VLAN status

id

VLAN status by VLAN id

vlan-id

VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19

__readonly__

(Optional) Read Only

TABLE_vlanbriefid

(Optional) VLAN brief table format

TABLE_mtuinfoid

(Optional) MTU information table format

vlanshowbr-hdr

(Optional) VLAN brief header

vlanshowbr-vlanid

(Optional) VLAN brief VLAN ID

vlanshowbr-vlanid-utf

(Optional) VLAN brief VLAN ID

vlanshowbr-vlanname

(Optional) VLAN brief VLAN name

vlanshowbr-vlanstate

(Optional) VLAN brief VLAN state

vlanshowbr-shutstate

(Optional) VLAN brief shutdown state

vlanshowplist-ifidx

(Optional) Port list ifindex

vlanshowinfo-mtu-hdr

(Optional) Vlan info mtu header

vlanshowinfo-vlanid

(Optional) Vlan info VLAN ID

vlanshowinfo-media-type

(Optional) Select media type

vlanshowinfo-vlanmode

(Optional) VLAN brief VLAN mode

vlanshow-vlanerrbitmap

(Optional) VLAN error bitmap

vlanshowrspan-hdr1

(Optional) RSPAN VLAN header for one VLAN

vlanshowrspan-hdr2

(Optional) RSPAN VLAN header for multiple VLANs

vlanshowrspan-vlantype

(Optional) RSPAN VLAN one VLAN rspan or non-rspan

vlanshowrspan-vlanbitmap

(Optional) RSPAN VLAN multiple VLANs

show-end

(Optional) Show vlan end marker

true-end

(Optional) Show vlan end marker

pvlan-hdr

(Optional) private vlan section

pvlan-id-section

(Optional) private id vlan section

pvlan-stby

(Optional) private vlan section on standby

is-vtp-manageable

(Optional) VTP Manageable VLAN flag

is-internal

(Optional) Internal VLAN flag

is-reserved

(Optional) Reserved VLAN flag

is-rspan

(Optional) RSPAN VLAN flag

is-dynamic-gvrp

(Optional) Dynamic GVRP VLAN flag

Command Mode

  • /exec

show vlan id counters

show vlan id <vlan-id> counters [ __readonly__ { TABLE_vlancounters <vlanshowbr-vlanid> [ <l2_ing_ucast_b> ] [ <l2_ing_ucast_p> ] [ <l2_ing_mcast_b> ] [ <l2_ing_mcast_p> ] [ <l2_ing_bcast_b> ] [ <l2_ing_bcast_p> ] [ <l2_egr_ucast_b> ] [ <l2_egr_ucast_p> ] [ <l3_ucast_rcv_b> ] [ <l3_ucast_rcv_p> ] [ <total_rcv_b> ] [ <total_rcv_p> ] [ <total_sent_b> ] [ <total_sent_p> ] } ]

Syntax Description

show

Show running system information

vlan

Vlan commands

id

VLAN status by VLAN id

counters

display counters

vlan-id

VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19

__readonly__

(Optional) Read Only

TABLE_vlancounters

(Optional) vlan counters table format

vlanshowbr-vlanid

(Optional) VLAN brief VLAN ID

l2_ing_ucast_b

(Optional) L2 Ingress unicast octets

l2_ing_ucast_p

(Optional) L2 Ingress unicast packets

l2_ing_mcast_b

(Optional) L2 Ingress multicast octets

l2_ing_mcast_p

(Optional) L2 Ingress multicast packets

l2_ing_bcast_b

(Optional) L2 Ingress broadcast octets

l2_ing_bcast_p

(Optional) L2 Ingress broadcast packets

l2_egr_ucast_b

(Optional) L2 Egress unicast octets

l2_egr_ucast_p

(Optional) L2 Egress unicast packets

l3_ucast_rcv_b

(Optional) L3 unicast octets in

l3_ucast_rcv_p

(Optional) L3 unicast packets in

total_rcv_b

(Optional) Total octets in

total_rcv_p

(Optional) Total packets in

total_sent_b

(Optional) Total octets out

total_sent_p

(Optional) Total packets out

Command Mode

  • /exec

show vlan id vn-segment

show vlan id <vlan-id> vn-segment [ __readonly__ <vlanshowinfo-segid-hdr> { TABLE_seginfoid <vlanshowinfo-seg-vlanid> <vlanshowinfo-segment-id> } <show-end> [ <true-end> ] ]

Syntax Description

show

Show running system information

vlan

VLAN status

id

VLAN status by VLAN id

vn-segment

Show vn-segment mapping

vlan-id

VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19

__readonly__

(Optional) Read Only

TABLE_seginfoid

(Optional) Segment id information table format

vlanshowinfo-segid-hdr

(Optional) Vlan info segment id header

vlanshowinfo-seg-vlanid

(Optional) Vlan info VLAN ID

vlanshowinfo-segment-id

(Optional) Vlan info SEGMENT ID

show-end

(Optional) Show vlan end marker

true-end

(Optional) Show vlan end marker

Command Mode

  • /exec

show vlan name

show vlan name <vname> [ __readonly__ <vlanshowbr-hdr> { TABLE_vlanbriefname <vlanshowbr-vlanid> <vlanshowbr-vlanid-utf> <vlanshowbr-vlanname> <vlanshowbr-vlanstate> <vlanshowbr-shutstate> [ <vlanshowplist-ifidx> + ] } <vlanshowinfo-mtu-hdr> { TABLE_mtuinfoname <vlanshowinfo-vlanid> <vlanshowinfo-media-type> <vlanshowinfo-vlanmode> } [ <vlanshowrspan-hdr1> ] [ <vlanshowrspan-vlantype> ] [ <vlanshowrspan-hdr2> ] [ <vlanshowrspan-vlanbitmap> ] <show-end> [ <true-end> ] ]

Syntax Description

show

Show running system information

vlan

VLAN status

name

VLAN status by VLAN name

vname

A vlan name with size 32 (128 if long vlan name enabled)

__readonly__

(Optional) Read Only

TABLE_vlanbriefname

(Optional) VLAN brief table format

TABLE_mtuinfoname

(Optional) MTU information table format

vlanshowbr-hdr

(Optional) VLAN brief header

vlanshowbr-vlanid

(Optional) VLAN brief VLAN ID

vlanshowbr-vlanid-utf

(Optional) VLAN brief VLAN ID

vlanshowbr-vlanname

(Optional) VLAN brief VLAN name

vlanshowbr-vlanstate

(Optional) VLAN brief VLAN state

vlanshowbr-shutstate

(Optional) VLAN brief shutdown state

vlanshowplist-ifidx

(Optional) Port list ifindex

vlanshowinfo-mtu-hdr

(Optional) Vlan info mtu header

vlanshowinfo-vlanid

(Optional) Vlan info VLAN ID

vlanshowinfo-media-type

(Optional) Select media type

vlanshowinfo-vlanmode

(Optional) VLAN brief VLAN mode

vlanshowrspan-hdr1

(Optional) RSPAN VLAN header for one VLAN

vlanshowrspan-hdr2

(Optional) RSPAN VLAN header for multiple VLANs

vlanshowrspan-vlantype

(Optional) RSPAN VLAN one VLAN rspan or non-rspan

vlanshowrspan-vlanbitmap

(Optional) RSPAN VLAN multiple VLANs

show-end

(Optional) Show vlan end marker

true-end

(Optional) Show vlan end marker

Command Mode

  • /exec

show vlan private-vlan

show vlan [ id <vlan-id> ] private-vlan [ __readonly__ [ { TABLE_pvlan_primary <vlan-key> [ <primary> ] [ <secondary> ] <pvlan-type> [ <ports> + ] } ] ]

Syntax Description

show

Show running system information

vlan

VLAN status

id

(Optional) VLAN status by VLAN id

vlan-id

(Optional) VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19

private-vlan

Private VLAN information

__readonly__

(Optional) Read Only

TABLE_pvlan_primary

(Optional) Pvlan primary vlan table

vlan-key

(Optional) Vlan key

primary

(Optional) Primary VLAN

secondary

(Optional) Secondary VLAN

pvlan-type

(Optional) PVLAN Type

ports

(Optional) Port list

Command Mode

  • /exec

show vlan private-vlan type

show vlan [ id <vlan-id> ] private-vlan type [ __readonly__ [ { TABLE_pvlantype <vlan-num> <pvlan-type> } ] ]

Syntax Description

show

Show running system information

vlan

VLAN status

id

(Optional) VLAN status by VLAN id

vlan-id

(Optional) VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19

private-vlan

Private VLAN information

type

Private VLAN type information

__readonly__

(Optional) Read Only

TABLE_pvlantype

(Optional) Pvlan type table

vlan-num

(Optional) vlan

pvlan-type

(Optional) PVLAN Type

Command Mode

  • /exec

show vlan xbrief

show vlan xbrief [ controller | cli ] [ __readonly__ <vlanshowbr-hdr> { TABLE_vlanbriefxbrief <vlanshowbr-vlanid> <vlanshowbr-vlanid-utf> <vlanshowbr-vlanname> <vlanshowbr-vlanstate> <vlanshowbr-shutstate> [ <vlanshowplist-ifidx> + ] } <show-end> [ <true-end> ] ]

Syntax Description

show

Show running system information

vlan

VLAN status

xbrief

All VLAN status in brief

controller

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

cli

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

__readonly__

(Optional) Read Only

TABLE_vlanbriefxbrief

(Optional) VLAN brief table format

vlanshowbr-hdr

(Optional) VLAN brief header

vlanshowbr-vlanid

(Optional) VLAN brief VLAN ID

vlanshowbr-vlanid-utf

(Optional) VLAN brief VLAN ID

vlanshowbr-vlanname

(Optional) VLAN brief VLAN name

vlanshowbr-vlanstate

(Optional) VLAN brief VLAN state

vlanshowbr-shutstate

(Optional) VLAN brief shutdown state

vlanshowplist-ifidx

(Optional) Port list ifindex

show-end

(Optional) Show vlan end marker

true-end

(Optional) Show vlan end marker

Command Mode

  • /exec

show vlan xsummary

show vlan xsummary [ __readonly__ <vlansum-all-vlan> <vlansum-vtp-vlan> <vlansum-ext-vlan> <vlansum-max-supported-vlan> <vlansum-carved-vlan> <show-end> [ <true-end> ] ]

Syntax Description

show

Show running system information

vlan

VLAN status

xsummary

VLAN summary information

__readonly__

(Optional) Read Only

vlansum-all-vlan

(Optional) Show vlan summary Total

vlansum-vtp-vlan

(Optional) Show vlan summary Number of normal vlans

vlansum-ext-vlan

(Optional) Show vlan summary Number of extended vlans

vlansum-max-supported-vlan

(Optional) Show vlan summary Max supported vlans

vlansum-carved-vlan

(Optional) Show vlan summary Number of carved sdn vlans

show-end

(Optional) Show vlan end marker

true-end

(Optional) Show vlan end marker

Command Mode

  • /exec

show vmtracker

show vmtracker [ connection <conn_name> ] { { info { { [ interface <intf_id> ] { summary | detail | host | vm | port-group } } | { vxlan-segment | vxlan-vms } } } | event-history } [ __readonly__ [ TABLE_info <intf_name> <host_or_ip> <vmnic> <vm_name> <vm_state> <port_group> <pg_type> <vlan_range> <virt_wire_name> <multicast_ip> <vdn_id> <vtep_ip> <event_time> <event_msg> ] [ TABLE_evt <event_id> <event_time> <event_msg> ] ]

Syntax Description

__readonly__

(Optional)

TABLE_info

(Optional)

intf_name

(Optional)

host_or_ip

(Optional)

vmnic

(Optional)

vm_name

(Optional)

vm_state

(Optional)

port_group

(Optional)

pg_type

(Optional)

vlan_range

(Optional)

virt_wire_name

(Optional)

multicast_ip

(Optional)

vdn_id

(Optional)

vtep_ip

(Optional)

event_time

(Optional)

event_msg

(Optional)

TABLE_evt

(Optional)

event_id

(Optional)

event_time

(Optional)

event_msg

(Optional)

show

Show running system information

vmtracker

Show vmtracker info

connection

(Optional) Show vmtracker configured connections

conn_name

(Optional) Show vmtracker Connection name

info

Display vmtracker information

interface

(Optional) Display vmtracker interface information

intf_id

(Optional) Interface name to display

summary

Display a summary of vmtracker information

detail

Display vmtracker information details

host

Display vmtracker host information

vm

Display vmtracker related Virtual Machine information

port-group

Display vmtracker related port-group information

vxlan-segment

Print all segment info

vxlan-vms

Print all vm info

event-history

Display vmtracker related event-history

Command Mode

  • /exec

show vmtracker certificate

show vmtracker certificate [ __readonly__ TABLE_cert <certificate> ]

Syntax Description

__readonly__

(Optional)

TABLE_cert

(Optional) The entire certificate, line by line

certificate

(Optional) A line of the certificate in xml

show

Show running system information

vmtracker

VMTRACKER commands

certificate

Show the default certificate used

Command Mode

  • /exec

show vmtracker fabric auto-config

show vmtracker fabric auto-config [ interface <intf_id> ] [ vlan <vlan_id> ] [ status { success | pending | failure | skipped } ] [ __readonly__ { <oper_status> } [ TABLE_autoconfig <interface_name> <port_group_name> <vlan_range> <config_status> ] ]

Syntax Description

__readonly__

(Optional)

oper_status

(Optional) fabric auto-config enabled or disabled

TABLE_autoconfig

(Optional)

interface_name

(Optional) interface to the UCS

port_group_name

(Optional) port-channel of this interface

vlan_range

(Optional) vlans learned

config_status

(Optional) status of auto-config over this interface

show

Show running system information

vmtracker

VMTRACKER commands

fabric

VM Tracker Fabric paramters

auto-config

VM Tracker Fabric AutoConfiguration

interface

(Optional) Display vmtracker interface information

intf_id

(Optional) Interface name to display

vlan

(Optional) vlan to display

vlan_id

(Optional) VLAN ID 1-4094 or range(s) like: 1-5, 10 or 2-5,7-19

status

(Optional) Auto-config status

success

(Optional) Success

pending

(Optional) Pending

failure

(Optional) Failure

skipped

(Optional) Skipped

Command Mode

  • /exec

show vmtracker status

show vmtracker [ connection <conn_name> ] status [ __readonly__ { TABLE_connection <name> <host_or_ip> <conn_status> } ]

Syntax Description

__readonly__

(Optional)

TABLE_connection

(Optional)

name

(Optional)

host_or_ip

(Optional)

conn_status

(Optional)

show

Show running system information

vmtracker

Show vmtracker info

connection

(Optional) Show vmtracker configured connections

conn_name

(Optional) Show vmtracker Connection name

status

Show vmtracker connection status

Command Mode

  • /exec

show vpc

show vpc [ brief ] [ __readonly__ <vpc-domain-id> [ <vpc-l2mp-switch-id> ] <vpc-peer-status> <vpc-peer-status-reason> <vpc-peer-keepalive-status> [ <vpc-peer-l2mp-status> ] <vpc-peer-consistency> { [ <vpc-peer-consistency-reason> ] [ <vpc-per-vlan-peer-consistency> ] <vpc-peer-consistency-status> } <vpc-type-2-consistency> { [ <vpc-type-2-consistency-reason> ] <vpc-type-2-consistency-status> } <vpc-role> <num-of-vpcs> [ <track-obj> ] [ <peer-gateway> ] [ <peer-gateway-excluded-vlans> ] <dual-active-excluded-vlans> <vpc-graceful-consistency-check-status> [ <vpc-auto-recovery-status> ] [ <vpc-delay-restore-status> ] [ <vpc-delay-restore-svi-status> ] [ <vpc-delay-peer-link-status> ] <operational-l3-peer> [ <vpc-scale-high-status> ] [ <fp-enhanced-load-balancing> ] [ <vpc-per-vlan-peer-consistency> ] [ <virtual-peerlink> ] [ <vpc-peer-link-hdr> [ { TABLE_peerlink <peer-link-id> <peerlink-ifindex> <peer-link-port-state> <peer-up-vlan-bitset> } ] <vpc-end> ] [ <vpc-hdr> [ <vpc-is-es> ] [ <vpc-not-es> ] [ { TABLE_vpc <vpc-id> <vpc-ifindex> <vpc-port-state> <phy-port-if-removed><vpc-thru-peerlink> <vpc-consistency> { [ <vpc-consistency-reason> ] [ <vpc-consistency-status> ] } <up-vlan-bitset> <es-attr> } ] <vpc-end> ] ]

Syntax Description

vpc

Virtual Port Channel configuration

brief

(Optional) Brief display of vPC status

__readonly__

(Optional) Read Only

TABLE_peerlink

(Optional) vPC peerlink table

TABLE_vpc

(Optional) vPC table

vpc-domain-id

(Optional) vPC domain id

vpc-l2mp-switch-id

(Optional) vPC+ switch ID

vpc-peer-status

(Optional) vPC peer status

vpc-peer-status-reason

(Optional) vPC peer status reason

vpc-peer-keepalive-status

(Optional) vpc peer keepalive status

vpc-peer-l2mp-status

(Optional) vPC fabricpath status

vpc-role

(Optional) vPC role

peer-gateway

(Optional) Peer gateway status

peer-gateway-excluded-vlans

(Optional) peer-gateway excluded VLANs

dual-active-excluded-vlans

(Optional) dual-active excluded VLANs

fp-enhanced-load-balancing

(Optional) Fabricpath enhanced load balancing status

num-of-vpcs

(Optional) Number of vPCs configured

track-obj

(Optional) Track object for vPC

vpc-graceful-consistency-check-status

(Optional) vPC graceful consistency check

vpc-consistency

(Optional) vPC global configuration consistency

vpc-consistency-reason

(Optional) vPC consistency reason

vpc-consistency-status

(Optional) vPC consistency reason

vpc-peer-consistency

(Optional) vPC global configuration consistency

vpc-peer-consistency-reason

(Optional) vPC consistency reason

vpc-peer-consistency-status

(Optional) vPC consistency reason

vpc-per-vlan-peer-consistency

(Optional) vPC per-vlan global configuration consistency

vpc-type-2-consistency

(Optional) vPC type-2 configuration consistency status

vpc-type-2-consistency-reason

(Optional) vPC type-2 configuration consistency reason

vpc-type-2-consistency-status

(Optional) vPC type-2 configuration consistency status

operational-l3-peer

(Optional) Operational Layer 3 peer status

virtual-peerlink

(Optional) Virtual peerlink status

vpc-scale-high-status

(Optional) vPC scale high status

vpc-hdr

(Optional) Start of vPC table

vpc-is-es

(Optional) Flag to indicate vPC+ complex

vpc-not-es

(Optional) Flag to indicate vPC complex

vpc-peer-link-hdr

(Optional) Start of vPC peer-link table

vpc-port-state

(Optional) vPC port state

vpc-end

(Optional) End of table

vpc-id

(Optional) vPC id

vpc-ifindex

(Optional) vPC ifindex

peer-link-id

(Optional) peer link id

peerlink-ifindex

(Optional) peer link ifindex

peer-link-port-state

(Optional) peer-link port state

peer-up-vlan-bitset

(Optional) peer link UP VLAN bitset

up-vlan-bitset

(Optional) vPC UP VLAN bitset

es-attr

(Optional) vPC+ attributes

vpc-auto-recovery-status

(Optional) Auto-recovery status

vpc-delay-restore-status

(Optional) Delay-resotre status

vpc-delay-restore-svi-status

(Optional) Dealy-restore-svi status

vpc-delay-peer-link-status

(Optional) Delay-peer-link status

Command Mode

  • /exec

show vpc

show vpc { <vpc-number> | brief vpc <vpc-number> } [ __readonly__ [ <vpc-hdr> ] [ <vpc-is-es> ] [ <vpc-not-es> ] [ TABLE_vpc <vpc-id> <vpc-ifindex> <vpc-port-state> <phy-port-if-removed><vpc-thru-peerlink> <vpc-consistency> { [ <vpc-consistency-reason> ] [ <vpc-consistency-status> ] } <up-vlan-bitset> <es-attr> ] <vpc-end> ]

Syntax Description

vpc

Virtual Port Channel configuration

brief

Brief display of vPC status

vpc-number

Enter a Virtual Port Channel number

__readonly__

(Optional) Read Only

vpc-hdr

(Optional) Start of vPC table

vpc-is-es

(Optional) Flag to indicate vPC+ complex

vpc-not-es

(Optional) Flag to indicate vPC complex

TABLE_vpc

(Optional) vPC table

vpc-id

(Optional) vPC id

vpc-ifindex

(Optional) vPC ifindex

vpc-port-state

(Optional) vPC port state

vpc-consistency

(Optional) vPC global configuration consistency

vpc-consistency-reason

(Optional) vPC consistency reason

vpc-consistency-status

(Optional) vPC consistency reason

up-vlan-bitset

(Optional) vPC UP VLAN bitset

es-attr

(Optional) vPC+ attributes

vpc-end

(Optional) End of table

Command Mode

  • /exec

show vpc consistency-parameters

show vpc consistency-parameters { global | vni | interface <if> | vpc <vpc-num> } [ __readonly__ TABLE_vpc_consistency <vpc-param-name> <vpc-param-type> <vpc-param-local-val> <vpc-param-peer-val> ]

Syntax Description

vpc

Virtual Port Channel configuration

consistency-parameters

Show vPC Consistency Parameters

global

Global Parameters

vni

Show vPC Consistency Parameters vni

if

vpc-num

Enter a Virtual Port Channel number

__readonly__

(Optional) Read Only

TABLE_vpc_consistency

(Optional) vPC table

vpc-param-name

(Optional)

vpc-param-type

(Optional)

vpc-param-local-val

(Optional)

vpc-param-peer-val

(Optional)

Command Mode

  • /exec

show vpc consistency-parameters vlans

show vpc consistency-parameters vlans [ vnseg ] [ __readonly__ TABLE_vpc_consistency <vpc-param-name> <vpc-param-type> [ <reason_code> ] [ <syserr> ] <vpc-pass-vlans> [ <reason_code> ] ]

Syntax Description

vpc

Virtual Port Channel configuration

consistency-parameters

Show vPC Consistency Parameters

vlans

vlans

vnseg

(Optional) Display vlan to vn-segment map

__readonly__

(Optional) Read Only

TABLE_vpc_consistency

(Optional) vPC table

vpc-param-name

(Optional)

vpc-param-type

(Optional)

vpc-pass-vlans

(Optional)

syserr

(Optional) vPC consistency reason

reason_code

(Optional) vPC consistency reason

Command Mode

  • /exec

show vpc fabric-ports

show vpc fabric-ports [ __readonly__ [ { TABLE_fabric_ports <vpc-fabric-ports> } ] ]

Syntax Description

vpc

Virtual Port Channel configuration

fabric-ports

Show ports that are part of uplink virtual-peerlink

__readonly__

(Optional) Read Only

TABLE_fabric_ports

(Optional) vPC fabric ports table

vpc-fabric-ports

(Optional) description of the port

Command Mode

  • /exec

show vpc orphan-ports

show vpc orphan-ports [ __readonly__ [ { TABLE_orphan_ports <vpc-vlan> <vpc-orphan-ports> } ] ]

Syntax Description

vpc

Virtual Port Channel configuration

orphan-ports

Show ports that are not part of vPC but have common VLANs

__readonly__

(Optional) Read Only

TABLE_orphan_ports

(Optional) vPC orphan ports table

vpc-vlan

(Optional) port vlan

vpc-orphan-ports

(Optional) description of the port

Command Mode

  • /exec

show vpc peer-keepalive

show vpc peer-keepalive [ __readonly__ <vpc-peer-keepalive-status> <vpc-keepalive-dest> <vpc-keepalive-send-interface> <vpc-keepalive-receive-interface> <vpc-keepalive-send-tstamp> <vpc-keepalive-receive-tstamp> <vpc-peer-keepalive-up-time> <vpc-keepalive-send-status> <vpc-keepalive-receive-status> <vpc-keepalive-lastupdate> [ <vpc-keepalive-dest> ] <vpc-keepalive-interval> <vpc-keepalive-timeout> <vpc-keepalive-hold-timeout> <vpc-keepalive-vrf> <vpc-keepalive-udp-port> <vpc-keepalive-tos> ]

Syntax Description

vpc

Virtual Port Channel configuration

peer-keepalive

vPC keepalive status

__readonly__

(Optional) Read Only

vpc-peer-keepalive-status

(Optional) vpc peer keepalive status

vpc-keepalive-dest

(Optional) vPC keepalive destination ip address

vpc-keepalive-send-status

(Optional) vPC keepalive send status

vpc-keepalive-receive-status

(Optional) vPC keepalive receive status

vpc-peer-keepalive-up-time

(Optional) keepalive- alive time

vpc-keepalive-send-tstamp

(Optional) vPC keepalive last send timestamp

vpc-keepalive-send-interface

(Optional) vPC keepalive send interface

vpc-keepalive-receive-tstamp

(Optional) vPC keepalive last receive timestamp

vpc-keepalive-receive-interface

(Optional) vPC keepalive receive interface

vpc-keepalive-lastupdate

(Optional) vPC keepalive last update from peer

vpc-keepalive-interval

(Optional) vPC keepalive timeout

vpc-keepalive-timeout

(Optional) vPC keepalive interval

vpc-keepalive-hold-timeout

(Optional) hold timeout

vpc-keepalive-vrf

(Optional) vrf name

vpc-keepalive-udp-port

(Optional) udp port

vpc-keepalive-tos

(Optional) tos value

Command Mode

  • /exec

show vpc role

show vpc role [ __readonly__ <vpc-peer-status> <vpc-peer-status-reason> [ <vpc-current-role> ] [ <vpc-es-current-role> ] <dual-active-detected> <vpc-system-mac> <vpc-system-prio> <vpc-local-system-mac> <vpc-local-system-prio><vpc-local-role-prio> <vpc-peer-system-mac> <vpc-peer-system-prio><vpc-peer-role-prio> ]

Syntax Description

vpc

Virtual Port Channel configuration

role

vPC role status

__readonly__

(Optional) Read Only

vpc-peer-status

(Optional) vPC peer status

vpc-peer-status-reason

(Optional) vPC peer status reason

vpc-current-role

(Optional) vPC role

vpc-es-current-role

(Optional) vPC role

dual-active-detected

(Optional) Dual active detection status

vpc-system-mac

(Optional) vPC system mac

vpc-local-system-mac

(Optional) vPC local system mac

vpc-peer-system-mac

(Optional) vPC peer system mac

vpc-system-prio

(Optional) vPC system priority

Command Mode

  • /exec

show vpc statistics peer-keepalive

show vpc statistics peer-keepalive [ __readonly__ <vpc-peer-keepalive-status> <vpc-keepalive-counters-tx> <vpc-keepalive-counters-rx> <vpc-keepalive-avg-rx-interval> <vpc-keepalive-peer-state-changes> ]

Syntax Description

vpc

Virtual Port Channel configuration

statistics

Statistics

peer-keepalive

peer keepalive module related statistics

__readonly__

(Optional) Read Only

vpc-peer-keepalive-status

(Optional) vpc peer keepalive status

vpc-keepalive-counters-tx

(Optional) tx counters

vpc-keepalive-counters-rx

(Optional) rx counters

vpc-keepalive-avg-rx-interval

(Optional) avg rx interval in ms

vpc-keepalive-peer-state-changes

(Optional) peer state changes

Command Mode

  • /exec

show vpc statistics vpc

show vpc statistics { vpc <vpc_num> | peer-link }

Syntax Description

vpc

Virtual Port Channel configuration

statistics

Statistics

vpc_num

Virtual Port Channel number

peer-link

stats for peer-link

Command Mode

  • /exec

show vpc virtual-peerlink dest reachable

show vpc virtual-peerlink dest reachable

Syntax Description

show

Show running system information

vpc

vPC related information

virtual-peerlink

virtual-peerlink Related show commands

dest

dest info

reachable

dest reachability

Command Mode

  • /exec

show vpc virtual-peerlink vlan consistency

show vpc virtual-peerlink vlan consistency

Syntax Description

show

Show running system information

vpc

vPC related information

virtual-peerlink

virtual-peerlink Related show commands

vlan

vlan info for vPC

consistency

vlan vni consistency

Command Mode

  • /exec

show vrf

show vrf [ <vrf-name> | <vrf-known-name> | all ]

Syntax Description

show

Show running system information

vrf

Display VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display VRF information for all VRFs

Command Mode

  • /exec

show vrf

show vrf [ <vrf-name> | <vrf-known-name> | all ] [ order id ] [ detail ] [ passive ] [ __readonly__ TABLE_vrf <vrf_name> <vrf_id> <vrf_state> [ <vrf_reason> ] [ <vrf_pend> ] [ <vpnid> <rd> [ <vni> ] <max_routes> <mid_threshold> ] [ { TABLE_tib <tib_id> <tib_af> <tib_nonce> <tib_state> [ <tib_reason> ] [ <tib_pend> ] } ] ]

Syntax Description

show

Show running system information

vrf

Display VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display VRF information for all VRFs

order

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

id

(Optional) Order by ID

detail

(Optional) Display VRF detail information

passive

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

__readonly__

(Optional)

TABLE_vrf

(Optional)

TABLE_tib

(Optional)

vrf_name

(Optional)

vrf_id

(Optional)

vrf_state

(Optional)

vrf_reason

(Optional)

vrf_pend

(Optional)

vpnid

(Optional)

rd

(Optional)

max_routes

(Optional)

mid_threshold

(Optional)

tib_id

(Optional)

tib_af

(Optional)

tib_nonce

(Optional)

tib_state

(Optional)

tib_reason

(Optional)

tib_pend

(Optional)

vni

(Optional)

Command Mode

  • /exec

show vrrp

show vrrp [ [ summary ] | { [ statistics | detail ] [ interface <interface_id> ] [ vr <vr_id> ] [ master | backup | init ] + } ] [ __readonly__ [ [ TABLE_vrrp_group <sh_if_index> <sh_group_id> <sh_group_type> <sh_group_state> <sh_group_preempt> <sh_vip_addr> { [ TABLE_sec_vip_addr <sh_sec_vip_addr> ] } <sh_priority> [ <sh_cfg_priority> <sh_fwd_thr_lower> <sh_fwd_thr_upper> ] <sh_adv_interval> [ <sh_auth_text> ] [ <sh_vmac> ] [ <sh_master_router> ] [ <sh_native_track_intf> <sh_native_track_priotiry> ] { [ TABLE_vrrp_track <sh_track_object_id> <sh_decrement_priority> <sh_track_object_state> ] } [ <sh_bfd_status> <sh_bfd_session> ] ] [ { TABLE_vrrp_statistics [ <if_index> ] [ <grp_id> ] [ <grp_type> ] [ <master_cnt> ] [ <adv_pkts> ] [ <adv_intv_mismatch> ] [ <auth_failure> ] [ <ttl_err> ] [ <zero_pri_adv_rcvd> ] [ <zero_pri_adv_sent> ] [ <type_fl_mismatch> ] [ <addr_mismatch> ] [ <inv_auth> ] [ <auth_mismatch> ] [ <inv_pkt_len> ] } ] [ <total_num_of_grp> ] [ <init_grps> ] [ <backup_grps> ] [ <master_grps> ] [ <vrrp_enabled_ifs> ] [ <mts_rx> ] [ <mts_tx> ] [ <pkt_rx> ] [ <pkt_tx> ] ] + ]

Syntax Description

show

Show running system information

vrrp

Show vrrp information

summary

(Optional) Show vrrp summary

statistics

(Optional) Show vrrp statistics

detail

(Optional) Show detailed information

interface

(Optional) Show vrrp info for the interface

interface_id

(Optional)

vr

(Optional) Show vrrp info for the group

vr_id

(Optional) [1-255] enter IPv4 vr group

master

(Optional) Groups in Master state

backup

(Optional) Groups in Backup state

init

(Optional) Groups in Init state

__readonly__

(Optional) Read only

TABLE_vrrp_group

(Optional) Group detail table

sh_if_index

(Optional) Interface type and number

sh_group_id

(Optional) Group number

sh_group_type

(Optional) Group type

sh_group_state

(Optional) VRRP group state

sh_group_preempt

(Optional) Group preemption statue

sh_vip_addr

(Optional) Virtual IP Address

TABLE_sec_vip_addr

(Optional) Secondary virtual ip address table

sh_sec_vip_addr

(Optional) Secondary virtual ip address

sh_priority

(Optional) Priority of VRRP group

sh_auth_text

(Optional) Authentication text

sh_cfg_priority

(Optional) Configured priority of VRRP group

sh_fwd_thr_lower

(Optional) Lower forwarding threshold

sh_fwd_thr_upper

(Optional) Upper forwarding threshold

sh_adv_interval

(Optional) Advertisement interval

sh_vmac

(Optional) Virtual MAC

sh_master_router

(Optional) Master router

sh_native_track_intf

(Optional) Native tracked interface

sh_native_track_priotiry

(Optional) Decrement priority for Native tracking

TABLE_vrrp_track

(Optional) VRRP tracking table

sh_track_object_id

(Optional) Object id of tracking object

sh_decrement_priority

(Optional) Decrement priority

sh_track_object_state

(Optional) Tracking object state

sh_bfd_status

(Optional) BFD status

sh_bfd_session

(Optional) BFD session status

TABLE_vrrp_statistics

(Optional) VRRP statistics table

if_index

(Optional) Interface type and number

grp_id

(Optional) Group number

grp_type

(Optional) Group type

master_cnt

(Optional) VRRP Master

adv_pkts

(Optional) Advertisement pkts

adv_intv_mismatch

(Optional) Advertisement interval mismatch

auth_failure

(Optional) Auth failure

ttl_err

(Optional) TTL error

zero_pri_adv_rcvd

(Optional) Zero pri adv received

zero_pri_adv_sent

(Optional) Zero pri adv sent

type_fl_mismatch

(Optional) Invalid type field

addr_mismatch

(Optional) Address mismatch

inv_auth

(Optional) Invalid auth type

auth_mismatch

(Optional) Authentication mismatch

inv_pkt_len

(Optional) Invalid pkt length

total_num_of_grp

(Optional) Total Number of Groups Configured

init_grps

(Optional) Init groups

backup_grps

(Optional) Backup groups

master_grps

(Optional) Master groups

vrrp_enabled_ifs

(Optional) Number of VRRP enabled interfaces

mts_rx

(Optional) Total MTS Rx

mts_tx

(Optional) Total MTS Tx

pkt_rx

(Optional) Total Pkt Rx

pkt_tx

(Optional) Total Pkt Tx

Command Mode

  • /exec

show vrrp bfd-sessions

show vrrp bfd-sessions [ interface <interface-id> [ to <ipaddress> ] ] [ __readonly__ TABLE_bfd_sess <interface> { <src_addr> | <src_addr_v6> } { <dst_addr> | <dst_addr_v6> } <session_state> <ref_count> <displayed_interface> { TABLE_groups <group_id> <vrrp_state> <bfd_status> <operation> <time> } ]

Syntax Description

show

Show running system information

vrrp

Show vrrp information

bfd-sessions

BFD sessions

interface

(Optional) Groups on this interface

interface-id

(Optional) Interface

to

(Optional) To IP address

ipaddress

(Optional) Sessions to IP address

__readonly__

(Optional)

TABLE_bfd_sess

(Optional)

interface

(Optional) Interface

src_addr

(Optional) IPv4 Source address

dst_addr

(Optional) IPv4 Destination address

session_state

(Optional) Session state

ref_count

(Optional) Ref count

displayed_interface

(Optional) Displayed interface

TABLE_groups

(Optional)

group_id

(Optional) Group id

vrrp_state

(Optional) VRRP STATE

bfd_status

(Optional) BFD STATE

operation

(Optional) Operation

time

(Optional) Time

Command Mode

  • /exec

show vrrpv3

show vrrpv3 [ brief | detail | statistics ] [ <intf> [ <group_num> ] ] [ <opt_v4_or_v6> ] [ all ] [ __readonly__ [ <global_drops> ] [ [ { TABLE_istats [ <i_intf> ] [ <i_drops> ] [ <ttl> ] [ <checksum> ] [ <version> ] [ <type> ] [ <length> ] [ <badid> ] [ <other> ] } ] [ { TABLE_grp [ <intf> ] [ <id> ] [ <af> ] [ <desc> ] [ <state> ] [ <duration> ] [ <vip> ] [ { TABLE_sec [ <addr> ] [ <prefix> ] } ] [ <vmac> ] [ <adv> ] [ <owner> ] [ <preempt> ] [ <delay> ] [ <delay_rem> ] [ <priority> ] [ <cfg_priority> ] [ <m_addr> ] [ <m_priority> ] [ <m_adv> ] [ <m_expire> ] [ <down> ] [ <down_expire> ] [ <t_id> ] [ <t_dec_prio> ] [ <t_state> ] [ <adv_sent> ] [ <adv_err> ] [ <adv_recvd> ] [ <v2adv_sent> ] [ <v2adv_err> ] [ <v2adv_recvd> ] [ <drops> ] [ <incompat> ] [ <conflict> ] [ <bad_count> ] [ <bad_addr> ] [ <bad_config> ] [ <bad_advert> ] [ <bad_state> ] [ <bad_other> ] [ <init_master> ] [ <init_master_time> ] [ <init_backup> ] [ <init_backup_time> ] [ <back_master> ] [ <back_master_time> ] [ <master_back> ] [ <master_back_time> ] [ <mast_init> ] [ <mast_init_time> ] [ <back_init> ] [ <back_init_time> ] } ] ] + [ { TABLE_vbrief [ <intf_b> ] [ <id_b> ] [ <af_b> ] [ <priority_b> ] [ <down_b> ] [ <owner_b> ] [ <preempt_b> ] [ <state_b> ] [ <m_addr_b> ] [ <vip_b> ] } ] ]

Syntax Description

show

Show running system information

vrrpv3

VRRPv3 Show commands

all

(Optional) All VRRPV3 information

brief

(Optional) Brief output

detail

(Optional) Detail output

statistics

(Optional) Statistics output

opt_v4_or_v6

(Optional) Enter ipv4 or ipv6

intf

(Optional) Interface

group_num

(Optional) Group Number

__readonly__

(Optional)

TABLE_istats

(Optional) Interface-level VRRPv3 statistics

TABLE_grp

(Optional) VRRP Groups

TABLE_sec

(Optional) Secondary Addresses

TABLE_vbrief

(Optional) VRRP Brief

global_drops

(Optional) Total dropped packets

i_intf

(Optional) Interface

i_drops

(Optional) Total dropped packets

ttl

(Optional) Invalid TTL/Hop limit

checksum

(Optional) Invalid checksum

version

(Optional) Invalid version

type

(Optional) Invalid message type

length

(Optional) Invalid length

badid

(Optional) Invalid group ID

other

(Optional) Other

intf

(Optional) Interface

id

(Optional) Group ID

af

(Optional) Address family

desc

(Optional) Description

state

(Optional) Group state

duration

(Optional) Time in current state

vip

(Optional) Primary virtual IP address

addr

(Optional) Secondary virtual IP address

prefix

(Optional) Secondary vIP prefix

vmac

(Optional) Virtual MAC address

adv

(Optional) Advertisement interval

preempt

(Optional) Preemption status

owner

(Optional) Owner mode

delay

(Optional) Preemption delay

delay_rem

(Optional) Preemption delay remaining

priority

(Optional) Priority

cfg_priority

(Optional) Configured priority

m_addr

(Optional) Group master router address

m_priority

(Optional) Group master priority

m_adv

(Optional) Master advertisement interval

m_expire

(Optional) Master expiration

down

(Optional) Master down interval

down_expire

(Optional) Master down expiration

t_id

(Optional) Tracking object ID

t_dec_prio

(Optional) Priority to decrement

t_state

(Optional) Tracking object state

adv_sent

(Optional) Advertisements sent

adv_err

(Optional) Advertisement errors

adv_recvd

(Optional) Advertisements received

v2adv_sent

(Optional) Advertisements sent (v2)

v2adv_err

(Optional) Advertisement errors (v2)

v2adv_recvd

(Optional) Advertisements received (v2)

drops

(Optional) Total dropped packets

incompat

(Optional) v2, Incompatible

conflict

(Optional) Address owner conflicts

bad_count

(Optional) Invalid address count

bad_addr

(Optional) Invalid IP address

bad_config

(Optional) Invalid IP address config

bad_advert

(Optional) Invalid advertisement interval

bad_state

(Optional) Invalid group state

bad_other

(Optional) Other

init_master

(Optional) Init to Master

init_master_time

(Optional) Last Occurrence

init_backup

(Optional) Init to Backup

init_backup_time

(Optional) Last Occurrence

back_master

(Optional) Backup to Master

back_master_time

(Optional) Last Occurrence

master_back

(Optional) Master to Backup

master_back_time

(Optional) Last Occurrence

mast_init

(Optional) Master to Init

mast_init_time

(Optional) Last Occurrence

back_init

(Optional) Backup to Init

back_init_time

(Optional) Last Occurrence

intf_b

(Optional) Interface

id_b

(Optional) Group ID

af_b

(Optional) Address family

priority_b

(Optional) Priority

down_b

(Optional) Master down interval

owner_b

(Optional) Owner mode

preempt_b

(Optional) Preemption status

state_b

(Optional) Group state

m_addr_b

(Optional) Group master router address

vip_b

(Optional) Primary virtual IP address

Command Mode

  • /exec

show vrrs client

show vrrs client [ <cname> ] [ __readonly__ { TABLE_client <name> <id> <all> <priority> { TABLE_tags <tname> } } ]

Syntax Description

vrrs

VRRS Show commands

show

Show running system information

client

Information about VRRS clients

cname

(Optional) VRRS client name

__readonly__

(Optional)

TABLE_client

(Optional) VRRS clients

TABLE_tags

(Optional) VRRS tags

name

(Optional) VRRS client name

id

(Optional) VRRS client id

priority

(Optional) Priority

all

(Optional) Client follows all tags

tname

(Optional) VRRS tag name

Command Mode

  • /exec

show vrrs pathway

show vrrs pathway [ <intf> ] [ __readonly__ { TABLE_pws <name> <state> <vrrs_push_state> <vmac> <vmac_state> <vmac_dbg> [ <pvmac> ] [ <pvmac_state> ] [ <pvmac_dbg> ] <af> [ <desc> ] <opt> <eval> [ { TABLE_vips <addr> [ <flags> ] } ] } ]

Syntax Description

vrrs

VRRS Show commands

show

Show running system information

pathway

Information about VRRS pathways

intf

(Optional) Interface

__readonly__

(Optional)

TABLE_pws

(Optional) Show VRRS pathways

TABLE_vips

(Optional) Pathway vIP addresses

name

(Optional) Pathway name

state

(Optional) Pathway state

vrrs_push_state

(Optional) VRRS push state

vmac

(Optional) Virtual MAC address

vmac_state

(Optional) Virtual MAC state

vmac_dbg

(Optional) Virtual MAC debug flags

pvmac

(Optional) Previous Virtual MAC address

pvmac_state

(Optional) Previous MAC state

pvmac_dbg

(Optional) Previous MAC debug flags

af

(Optional) Pathway address-family

desc

(Optional) Pathway description

opt

(Optional) Option flags

eval

(Optional) Eval flags

addr

(Optional) Virtual IP address

flags

(Optional) Virtual IP address flags

Command Mode

  • /exec

show vrrs server

show vrrs server [ __readonly__ { TABLE_srv <name> <af> <intf> <state> <vmac> <vip> [ { TABLE_tag <tag> } ] } ]

Syntax Description

vrrs

VRRS Show commands

show

Show running system information

server

Information about VRRS servers

__readonly__

(Optional)

TABLE_srv

(Optional) VRRS Servers

TABLE_tag

(Optional) VRRS tags associated with each server

name

(Optional) VRRS server name

af

(Optional) Address-family

intf

(Optional) Interface

state

(Optional) VRRS server state

vmac

(Optional) Virtual MAC address

vip

(Optional) Virtual IP address

tag

(Optional) VRRS tag

Command Mode

  • /exec

show vrrs tag

show vrrs tag [ <tagname> ] [ __readonly__ { TABLE_tag <name> <server> [ { TABLE_client <id> <client> <all> } ] } ]

Syntax Description

vrrs

VRRS Show commands

show

Show running system information

tag

Information about VRRS tags

tagname

(Optional) VRRS tag

__readonly__

(Optional)

TABLE_tag

(Optional) Known VRRS tags

TABLE_client

(Optional) VRRS clients listening

name

(Optional) VRRS tag name

server

(Optional) VRRS server name

id

(Optional) VRRS client id

client

(Optional) VRRS client name

all

(Optional) Client follows all tags

Command Mode

  • /exec

show vsan

show vsan [ <id_in> ] [ __readonly__ { TABLE_vsan <id> { [ <name> <state> <interop_mode> <load_balancing> <operational_state> ] | <inactive_vsan_name> | <evfp_control_vsan_name> } } ]

Syntax Description

show

Show running system information

vsan

Vsan commands

id_in

(Optional) VSAN ID range

__readonly__

(Optional) Read Only

TABLE_vsan

(Optional) Table of VSAN's

id

(Optional) VSAN ID

name

(Optional) VSAN name

state

(Optional) VSAN state

interop_mode

(Optional) Interoperability mode

load_balancing

(Optional) Load balancing

operational_state

(Optional) Operational state

inactive_vsan_name

(Optional) Isolated VSAN

evfp_control_vsan_name

(Optional) EVFP isolated VSAN

Command Mode

  • /exec

show vsan membership

show vsan [ <id_in> ] membership [ __readonly__ { TABLE_vsan <id> [ <inactive_vsan_name> ] [ <evfp_control_vsan_name> ] [ TABLE_interface <name> ] } ]

Syntax Description

show

Show running system information

vsan

Vsan commands

id_in

(Optional) VSAN ID range

membership

VSAN membership information

__readonly__

(Optional) Read Only

TABLE_vsan

(Optional) VSAN table

id

(Optional) VSAN ID

inactive_vsan_name

(Optional) Isolated VSAN

evfp_control_vsan_name

(Optional) EVFP isolated VSAN

TABLE_interface

(Optional) List of interface members

name

(Optional) Interface name

Command Mode

  • /exec

show vsan membership interface

show vsan membership interface <if_in> [ __readonly__ { TABLE_interface <name> <vsan_id_memb> [ <inactive_vsan_name> | <evfp_control_vsan_name> ] <allowed_vsan_list> } ]

Syntax Description

show

Show running system information

vsan

Vsan commands

membership

VSAN membership information

interface

Show interface status and information

if_in

Interface range

__readonly__

(Optional) Read Only

TABLE_interface

(Optional) Interface VSAN table

name

(Optional) Interface Name

vsan_id_memb

(Optional) VSAN ID to which interface belongs

inactive_vsan_name

(Optional) Isolated VSAN

evfp_control_vsan_name

(Optional) EVFP isolated VSAN

allowed_vsan_list

(Optional) Allowed VSAN list

Command Mode

  • /exec

show vsan usage

show vsan usage [ __readonly__ { <num_vsans_configured> <configured_range_of_vsans> <vsans_available_to_configure> } ]

Syntax Description

show

Show running system information

vsan

Vsan commands

usage

show VSAN usage in the system

__readonly__

(Optional) Read Only

num_vsans_configured

(Optional) Total VSAN's configured

configured_range_of_vsans

(Optional) Range of VSAN's configured

vsans_available_to_configure

(Optional) VSAN range available to configure

Command Mode

  • /exec

show vtp counters

show vtp counters [ __readonly__ <start> <summary_rx> <subset_rx> <request_rx> <summary_tx> <subset_tx> <request_tx> <num_config_rev_error> <num_config_digest_error> <num_v1_summary_error> [ { TABLE_pruning_counters <if_index> <join_tx> <join_rx> <summary_adv_v1_rx> } ] ]

Syntax Description

show

Show running system information

vtp

VTP information

counters

VTP statistics

__readonly__

(Optional) Read Only

start

(Optional) Start

summary_rx

(Optional) Summary advertisements received

subset_rx

(Optional) Subset advertisements received

request_rx

(Optional) Request advertisements received

summary_tx

(Optional) Summary advertisements transmitted

subset_tx

(Optional) Subset advertisements transmitted

request_tx

(Optional) Request advertisements transmitted

num_config_rev_error

(Optional) Number of config revision errors

num_config_digest_error

(Optional) Number of config digest errors

num_v1_summary_error

(Optional) Number of V1 summary errors

TABLE_pruning_counters

(Optional) Pruning counters in table format

if_index

(Optional) Trunk

join_tx

(Optional) Join Transmitted

join_rx

(Optional) Join Received

summary_adv_v1_rx

(Optional) Summary advts received from non-pruning-capable device

Command Mode

  • /exec

show vtp interface

show vtp interface [ <interface_range> ] [ __readonly__ [ <start> ] { TABLE_vtp_interface <if_index> <status> } ]

Syntax Description

show

Show running system information

vtp

VTP information

interface

VTP interface status and configuration

interface_range

(Optional) Enter interfaces

__readonly__

(Optional) Read Only

start

(Optional) Start

TABLE_vtp_interface

(Optional) VTP interface configuration in table format

if_index

(Optional) Trunk

status

(Optional) VTP interface status

Command Mode

  • /exec

show vtp password

show vtp password [ domain <domain-id> ] [ __readonly__ <start> <passwd> <password-type> <secret-key> ]

Syntax Description

show

Show running system information

vtp

VTP information

password

VTP password

domain

(Optional) VTP administrative domain

domain-id

(Optional) Domian index(Domain-id)

__readonly__

(Optional) Read Only

start

(Optional) Start

passwd

(Optional) VTP Domain Password

password-type

(Optional) Password Type (1=plaintxt, 2=hidden)

secret-key

(Optional) Secret Key for the password

Command Mode

  • /exec

show vtp status

show vtp status [ __readonly__ <start> <version> <config_rev> <max_vlan_supported_local> <num_current_vlans> <oper_mode> <domain_name> <pruning_mode> <oper_pruning_mode> <v2_mode> <trap_enabled> <md5_digest> <last_modified_ip> <last_modified_time> <running-version> <updater_id> <updater_reason> ]

Syntax Description

show

Show running system information

vtp

VTP information

status

VTP domain status

__readonly__

(Optional) Read Only

start

(Optional) Start

version

(Optional) VTP version

config_rev

(Optional) Configuration Revision

max_vlan_supported_local

(Optional) Maximum VLANs supported locally

num_current_vlans

(Optional) Number of existing VLANs

oper_mode

(Optional) VTP Mode

domain_name

(Optional) VTP Domain Name

pruning_mode

(Optional) Pruning Mode

oper_pruning_mode

(Optional) Operational Pruning Mode

v2_mode

(Optional) VTP v2 Mode

trap_enabled

(Optional) trap enabled

md5_digest

(Optional) MD5 Digest

last_modified_ip

(Optional) Configuration last modified by

last_modified_time

(Optional) Configuration last modified at

running-version

(Optional) VTP Version Running

updater_id

(Optional) Local Updater id

updater_reason

(Optional) Local Updater id reason

Command Mode

  • /exec