F Show Commands

show fabric-binding database

show fabric-binding database [ { active [ vsan <i0> ] | vsan1 <i1> } ]

Syntax Description

show

Show running system information

fabric-binding

Show Fabric Binding

database

Show Fabric Binding Configured database

active

(Optional) Activated Fabric Bindings

vsan

(Optional) VSAN id

i0

(Optional) VSAN range

vsan1

(Optional) VSAN id

i1

(Optional) VSAN range

Command Mode

  • /exec

show fabric-binding efmd statistics

show fabric-binding efmd statistics [ vsan <i0> ]

Syntax Description

show

Show running system information

fabric-binding

Show Fabric Binding

efmd

Exchange Fabric Membership Data

statistics

EFMD protocol statistics

vsan

(Optional) VSAN id

i0

(Optional) VSAN range

Command Mode

  • /exec

show fabric-binding fip

show fabric-binding fip

Syntax Description

show

Show running system information

fabric-binding

Fabric Binding configuration

fip

Display the enabled FIP

Command Mode

  • /exec

show fabric-binding statistics

show fabric-binding statistics [ vsan <i0> ]

Syntax Description

show

Show running system information

fabric-binding

Show Fabric Binding

statistics

Statistics of Fabric Binding

vsan

(Optional) VSAN Id

i0

(Optional) VSAN range

Command Mode

  • /exec

show fabric-binding status

show fabric-binding status [ vsan <i0> ]

Syntax Description

show

Show running system information

fabric-binding

Show Fabric Binding

status

Fabric binding Status

vsan

(Optional) VSAN Id

i0

(Optional) VSAN range

Command Mode

  • /exec

show fabric-binding violations

show fabric-binding violations [ last <i0> ]

Syntax Description

show

Show running system information

fabric-binding

Show Fabric Binding

violations

Violations of Fabric Binding policies

last

(Optional) Latest n violations

i0

(Optional) Violation number

Command Mode

  • /exec

show fabric database dci

show fabric database dci [ { vrf { <vrf-name> | <vrf-known-name> } [ peer-id <peer-ip-address> ] [ detail ] } ] [ __readonly__ [ TABLE_database_dci <vrf_name> <state> <flags> <profile> <instance> ] [ TABLE_database_dci_detail <packet_arrival_time> <sent_to_database_manager_at> <received_parameters_from_database_manager_at> <sent_apply_to_configuration_manager_at> <completed_executing_all_commands_at> <sent_un_apply_to_configuration_manager_at> <completed_unapplying_all_commands_at> ] ]

Syntax Description

show

Show running system information

fabric

Fabric

database

Fabric Database

dci

DCI Profile Database

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

peer-id

(Optional) management ip address of peer

peer-ip-address

(Optional) IP address in CIDR format

detail

(Optional) Show detailed information

__readonly__

(Optional) Read Only

TABLE_database_dci

(Optional) table show fabric database dci

vrf_name

(Optional)

state

(Optional)

flags

(Optional)

profile

(Optional)

instance

(Optional)

TABLE_database_dci_detail

(Optional) detail for table show fabric database dci

packet_arrival_time

(Optional) Profile request time

sent_to_database_manager_at

(Optional) Profile request sent to DCNM

received_parameters_from_database_manager_at

(Optional) Profile downloaded from DCNM

sent_apply_to_configuration_manager_at

(Optional) Profile sent to PPM to apply

completed_executing_all_commands_at

(Optional) Profile applied by PPM

sent_un_apply_to_configuration_manager_at

(Optional) Profile un-apply sent to PPM

completed_unapplying_all_commands_at

(Optional) Profile un-applied by PPM

Command Mode

  • /exec

show fabric database host

show fabric database host [ detail ] [ { vni <vni-id> } | { dot1q <vlan-id> } ] [ __readonly__ [ TABLE_database_host [ <trigger_source> ] [ <client_type> ] [ <got_trigger_at> ] [ <number_of_client_hosts> ] [ <number_of_associated_interfaces> ] [ <profile_be_un_applied_in_seconds> ] [ <new_vdp_requests_be_accepted_in_seconds> ] [ <recovered_profile_be_checked_for_validity_in_seconds> ] [ <mac_aging_checked_in_seconds> ] [ <sent_to_database_manager_at> ] [ <received_parameters_from_database_manager_at> ] [ <displaying_parameters_for_profile> ] [ <displaying_parameters_for_instance> ] [ <no_parameters_for_the_profile> ] [ <displaying_re_written_parameters_for_vpc_role> ] [ TABLE_parameter [ <parameter_index> ] [ <parameter> ] ] [ TABLE_static_profile <profile> <instance> <no_parameters_for_the_profile> ] [ TABLE_migrated_profile <profile> <instance_index> <previous_profile> <previous_instance_index> ] [ TABLE_rollback_profile <profile> <instance_index> ] [ <got_vlan_allocated_from_vlan_manager_at> ] [ <sent_apply_to_configuration_manager_at> ] [ <completed_executing_all_commands_at> ] [ <sent_to_vpc_peer_at> ] [ <completed_executing_all_commands_on_vpc_peer_at> ] [ <sent_un_apply_to_configuration_manager_at> ] [ <completed_unapplying_all_commands_at> ] ] [ TABLE_database_host_vni { [ <vni_id> ] [ <vlan_id> ] [ <state> <flag> <profile_name> <instance_name> ] [ <packet_arrival_time> <request_profile_time> <got_profile_time> <sent_to_PPM_time> <profile_apply_time> <del_to_PPM_time> ] [ { TABLE_database_host_detail <interface> <encap> <flags> <state> [ <vsi_id> ] [ <client> ] [ <host> ] } ] } ] [ TABLE_database_host_vlan { [ <vlan_id> ] [ <vni_id> ] [ <state> <flag> <profile_name> <instance_name> ] [ <packet_arrival_time> <request_profile_time> <got_profile_time> <sent_to_PPM_time> <profile_apply_time> <del_to_PPM_time> ] [ { TABLE_database_host_detail <interface> <encap> <flags> <state> [ <vsi_id> ] } ] } ] [ TABLE_extranet_vrf_entries { <vrf> <l3_vni> <state> <profile> <instance> } ] ]

Syntax Description

show

Show running system information

fabric

Fabric

database

Fabric Database

host

Host to profile mapping

detail

(Optional) Show hosts and interfaces

vni

(Optional) Virtual Network Identifier

vni-id

(Optional)

dot1q

(Optional) Dot1Q Encapsulation

vlan-id

(Optional)

__readonly__

(Optional) Read Only

TABLE_database_host

(Optional) table show fabric database host {dot1q | vni}

trigger_source

(Optional) TODO

client_type

(Optional) TODO

got_trigger_at

(Optional) TODO

number_of_client_hosts

(Optional) TODO

number_of_associated_interfaces

(Optional) TODO

profile_be_un_applied_in_seconds

(Optional) TODO

new_vdp_requests_be_accepted_in_seconds

(Optional) TODO

recovered_profile_be_checked_for_validity_in_seconds

(Optional) TODO

mac_aging_checked_in_seconds

(Optional) TODO

sent_to_database_manager_at

(Optional) TODO

received_parameters_from_database_manager_at

(Optional) TODO

displaying_parameters_for_profile

(Optional) TODO

displaying_parameters_for_instance

(Optional) TODO

no_parameters_for_the_profile

(Optional) TODO

displaying_re_written_parameters_for_vpc_role

(Optional) TODO

TABLE_parameter

(Optional) table show the parameters

parameter_index

(Optional) TODO

parameter

(Optional) TODO

TABLE_static_profile

(Optional) show static profile

profile

(Optional) TODO

instance

(Optional) TODO

no_parameters_for_the_profile

(Optional) TODO

TABLE_migrated_profile

(Optional) show migrated profile

profile

(Optional) TODO

instance_index

(Optional) TODO

previous_profile

(Optional) TODO

previous_instance_index

(Optional) TODO

TABLE_rollback_profile

(Optional) show rollback profile

profile

(Optional) TODO

instance_index

(Optional) TODO

got_vlan_allocated_from_vlan_manager_at

(Optional) TODO

sent_apply_to_configuration_manager_at

(Optional) TODO

completed_executing_all_commands_at

(Optional) TODO

sent_to_vpc_peer_at

(Optional) TODO

completed_executing_all_commands_on_vpc_peer_at

(Optional) TODO

sent_un_apply_to_configuration_manager_at

(Optional) TODO

completed_unapplying_all_commands_at

(Optional) TODO

TABLE_database_host_vni

(Optional) table show fabric database host vni based

vni_id

(Optional) TODO Add comment

vlan_id

(Optional) TODO Add comment

state

(Optional) TODO Add comment

flag

(Optional) TODO

profile_name

(Optional) TODO

instance_name

(Optional) TODO

packet_arrival_time

(Optional) TODO

request_profile_time

(Optional) TODO

got_profile_time

(Optional) TODO

sent_to_PPM_time

(Optional) TODO

profile_apply_time

(Optional) TODO

del_to_PPM_time

(Optional) TODO

TABLE_database_host_detail

(Optional) table show fabric database host detail

interface

(Optional) TODO

encap

(Optional) TODO

flags

(Optional) TODO

state

(Optional) TODO

vsi_id

(Optional) TODO

client

(Optional) TODO

host

(Optional) TODO

TABLE_database_host_vlan

(Optional) table show fabric database host vlan based

vlan_id

(Optional) TODO Add comment

vni_id

(Optional) TODO Add comment

state

(Optional) TODO Add comment

flag

(Optional) TODO

profile_name

(Optional) TODO

instance_name

(Optional) TODO

packet_arrival_time

(Optional) TODO

request_profile_time

(Optional) TODO

got_profile_time

(Optional) TODO

sent_to_PPM_time

(Optional) TODO

profile_apply_time

(Optional) TODO

del_to_PPM_time

(Optional) TODO

TABLE_database_host_detail

(Optional) table show fabric database host detail

interface

(Optional) TODO

encap

(Optional) TODO

flags

(Optional) TODO

state

(Optional) TODO

vsi_id

(Optional) TODO

TABLE_extranet_vrf_entries

(Optional) table extranet VRF entries

vrf

(Optional) TODO

l3_vni

(Optional) TODO

state

(Optional) TODO

profile

(Optional) TODO

instance

(Optional) TODO

Command Mode

  • /exec

show fabric database host statistics

show fabric database host statistics [ __readonly__ [ TABLE_database_host_statistics { [ <data_snoop_triggers> ] [ <data_snoop_deletes> ] [ <data_snoop_responses> ] [ <vdp_association_requests> ] [ <vdp_deassociation_requests> ] [ <vdp_association_responses> ] [ <vdp_error_responses> ] [ <unsupported_interfaces> ] [ <no_profile_map_errors> ] [ <outstanding_delete_retry_add> ] [ <duplicate_add_existing_host> ] [ <hmm_api_error_cannot_add_host> ] [ <existing_profile_new_host> ] [ <profile_apply_from_vpc_peer> ] [ <profile_un_apply_from_vpc_peer> ] [ <host_apply_from_vpc_peer> ] [ <host_un_apply_from_vpc_peer> ] [ <early_delete_cancel_add> ] [ <dhcp_requests> ] [ <dhcp_responses> ] [ <dhcp_error_responses> ] [ <adbm_requests> ] [ <adbm_responses> ] [ <adbm_error_responses> ] [ <adbm_error_requests> ] [ <adbm_db_notifications> ] [ <vnseg_no_bridge_domain> ] [ <vnseg_encap_responses> ] [ <vnseg_vni_responses> ] [ <vnseg_unknown_responses> ] [ <vnseg_bd_down_notif> ] [ <bd_mgr_requests> ] [ <bd_mgr_success_responses> ] [ <bd_mgr_failure_responses> ] [ <bd_mgr_unreserve> ] [ <bd_mgr_inconsistencies> ] [ <no_mac_on_bd_notif> ] [ <refresh_failures> ] [ <profile_apply_received> ] [ <profile_vpc_queued> ] [ <profile_local_apply_queued> ] [ <profile_local_unapply_queued> ] [ <profile_apply_sent> ] [ <profile_apply_responses> ] [ <profile_apply_success> ] [ <profile_unapply_success> ] [ <profile_apply_failure> ] [ <profile_commands> ] [ <profile_error_incomplete_configs> ] [ <profile_api_error> ] [ <profile_unapply_sent> ] [ <profile_top_queue_adds> ] [ <profile_high_queue_adds> ] [ <profile_low_queue_adds> ] [ <profile_unapply_failure> ] [ <outstanding_vlan_requests> ] [ <outstanding_adbm_requests> ] [ <outstanding_profile_applies> ] [ <outstanding_vpc_profile_applies> ] [ <node_recon_pending> ] [ <node_recon_attempts> ] [ <node_recon_failures> ] } ] ]

Syntax Description

show

Show running system information

fabric

Fabric

database

Fabric Database

host

Auto-configured Hosts

statistics

Statistics - Mostly shows non-zero values

__readonly__

(Optional) Read Only

TABLE_database_host_statistics

(Optional) table show fabric database host statistics

data_snoop_triggers

(Optional) TODO

data_snoop_deletes

(Optional) TODO

data_snoop_responses

(Optional) TODO

vdp_association_requests

(Optional) TODO

vdp_deassociation_requests

(Optional) TODO

vdp_association_responses

(Optional) TODO

vdp_error_responses

(Optional) TODO

unsupported_interfaces

(Optional) TODO

no_profile_map_errors

(Optional) TODO

outstanding_delete_retry_add

(Optional) TODO

duplicate_add_existing_host

(Optional) TODO

hmm_api_error_cannot_add_host

(Optional) TODO

existing_profile_new_host

(Optional) TODO

profile_apply_from_vpc_peer

(Optional) TODO

profile_un_apply_from_vpc_peer

(Optional) TODO

host_apply_from_vpc_peer

(Optional) TODO

host_un_apply_from_vpc_peer

(Optional) TODO

early_delete_cancel_add

(Optional) TODO

dhcp_requests

(Optional) TODO

dhcp_responses

(Optional) TODO

dhcp_error_responses

(Optional) TODO

adbm_requests

(Optional) TODO

adbm_responses

(Optional) TODO

adbm_error_responses

(Optional) TODO

adbm_error_requests

(Optional) TODO

adbm_db_notifications

(Optional) TODO

vnseg_no_bridge_domain

(Optional) TODO

vnseg_encap_responses

(Optional) TODO

vnseg_vni_responses

(Optional) TODO

vnseg_unknown_responses

(Optional) TODO

vnseg_bd_down_notif

(Optional) TODO

bd_mgr_requests

(Optional) TODO

bd_mgr_success_responses

(Optional) TODO

bd_mgr_failure_responses

(Optional) TODO

bd_mgr_unreserve

(Optional) TODO

bd_mgr_inconsistencies

(Optional) TODO

no_mac_on_bd_notif

(Optional) TODO

refresh_failures

(Optional) TODO

profile_apply_received

(Optional) TODO

profile_vpc_queued

(Optional) TODO

profile_local_apply_queued

(Optional) TODO

profile_local_unapply_queued

(Optional) TODO

profile_apply_sent

(Optional) TODO

profile_apply_responses

(Optional) TODO

profile_apply_success

(Optional) TODO

profile_unapply_success

(Optional) TODO

profile_apply_failure

(Optional) TODO

profile_commands

(Optional) TODO

profile_error_incomplete_configs

(Optional) TODO

profile_api_error

(Optional) TODO

profile_unapply_sent

(Optional) TODO

profile_top_queue_adds

(Optional) TODO

profile_high_queue_adds

(Optional) TODO

profile_low_queue_adds

(Optional) TODO

profile_unapply_failure

(Optional) TODO

outstanding_vlan_requests

(Optional) TODO

outstanding_adbm_requests

(Optional) TODO

outstanding_profile_applies

(Optional) TODO

outstanding_vpc_profile_applies

(Optional) TODO

node_recon_pending

(Optional) TODO

node_recon_attempts

(Optional) TODO

node_recon_failures

(Optional) TODO

Command Mode

  • /exec

show fabric database host summary

show fabric database host summary [ __readonly__ [ TABLE_database_host_summary { <number_of_instances_applied> <number_of_client_hosts> <recovery_timeout_minute> <cleanup_timeout_minute> <client_add_suppression_timeout_minute> <mac_aging_timeout_minute> <autoid_support> } ] ]

Syntax Description

show

Show running system information

fabric

Fabric

database

Fabric Database

host

Auto-configured Hosts

summary

Summary

__readonly__

(Optional) Read Only

TABLE_database_host_summary

(Optional) table show fabric database host summary

number_of_instances_applied

(Optional) TODO

number_of_client_hosts

(Optional) TODO

recovery_timeout_minute

(Optional) TODO

cleanup_timeout_minute

(Optional) TODO

client_add_suppression_timeout_minute

(Optional) TODO

mac_aging_timeout_minute

(Optional) TODO

autoid_support

(Optional) List of supported auto-generate ids

Command Mode

  • /exec

show fabric database profile-map

show fabric database profile-map { global | [ <id> | interface <interface-id> ] } [ __readonly__ [ TABLE_database_profile_map { <map> <proto> <vni> <dot1q> <flags> <profile_name> } ] ]

Syntax Description

show

Show running system information

fabric

Fabric

database

Fabric Database

profile-map

Profile Map

global

Global profile (apply to all interfaces)

id

(Optional) Profile Map ID

interface

(Optional) Specified interface to display

interface-id

(Optional) Name of interface

__readonly__

(Optional) Read Only

TABLE_database_profile_map

(Optional) table show fabric database profile-map

map

(Optional) TODO

proto

(Optional) TODO

vni

(Optional) TODO

dot1q

(Optional) TODO

flags

(Optional) TODO

profile_name

(Optional) TODO

Command Mode

  • /exec

show fabric database static-host

show fabric database static-host [ __readonly__ { TABLE_database_static_host <host_key> <interface> <state> <retry_delay> <retry_attempts> } ]

Syntax Description

show

Show running system information

fabric

Fabric

database

Fabric Database

static-host

Configured Static Hosts

__readonly__

(Optional) Read Only

TABLE_database_static_host

(Optional) table show fabric database static-host

host_key

(Optional) static-host key

interface

(Optional) interface name

state

(Optional) static-host state

retry_delay

(Optional) seconds until next retry

retry_attempts

(Optional) cumulative retry attempts

Command Mode

  • /exec

show fabric database statistics

show fabric database statistics [ type { network | profile | cabling | partition | bl-dci | host } ] [ __readonly__ { TABLE_types <dbtype> <requests> <dispatched> <not_dispatched> <re_dispatched> } [ { TABLE_dbs <is_active> <type> <prot> <serverdb> [ <reqs> <ok> <nores> <err> <tmout> <pend> ] } ] { LastPollTime <poll_time> } { LastUpdateTime <update_time> } [ { TABLE_updates <update_type> <update_status> } ] ]

Syntax Description

show

Show running system information

fabric

Fabric

database

Show Fabric Database

statistics

Show database statistics

type

(Optional) Enter database type

network

(Optional) Network Database

profile

(Optional) Port or Switch Profile Database

cabling

(Optional) Cable Management Database

partition

(Optional) Partition Database

bl-dci

(Optional) Border Leaf - DCI

host

(Optional) Host

__readonly__

(Optional)

TABLE_types

(Optional) totals by type

dbtype

(Optional) type of database

requests

(Optional) number of requests

dispatched

(Optional) number dispatched

not_dispatched

(Optional) number not dispatched

re_dispatched

(Optional) number re-dispatched

TABLE_dbs

(Optional) per-database stats

is_active

(Optional) active/inactive

type

(Optional) database type

prot

(Optional) database protocol

serverdb

(Optional) server database

reqs

(Optional) requests

ok

(Optional) OK

nores

(Optional) nores

err

(Optional) err

tmout

(Optional) tmout

pend

(Optional) pend

LastPollTime

(Optional) last poll time

poll_time

(Optional) poll time

LastUpdateTime

(Optional) last update time for db status change

update_time

(Optional) update time

TABLE_updates

(Optional) totals ty type

update_type

(Optional) db type

update_status

(Optional) db status

Command Mode

  • /exec

show fabric forwarding host-db

show fabric forwarding host-db [ { vrf { <vrf-name> | <vrf-known-name> | all } } ] [ __readonly__ [ TABLE_forwarding_host_db_vrf { <vrf> <vrf_id> <vrf_state> <vrf_reason> <vni_id> <refcount> <conversational_learning> [ TABLE_limit_type <limit_type> <enable> <threshold> <action> ] [ TABLE_ipv4 <address_family> <vrf> <table_id> <table_state> <refcount> <local_hosts> <remote_hosts> <aggregates> [ TABLE_aggregate_list <aggregate_subnet_prefix_list> <aggregate_subnet_prefix_state> ] ] [ TABLE_ipv6 <address_family> <vrf> <table_id> <table_state> <refcount> <local_hosts> <remote_hosts> <aggregates> [ TABLE_aggregate_list <aggregate_subnet_prefix_list> <aggregate_subnet_prefix_state> ] ] } ] ]

Syntax Description

show

Show running system information

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

host-db

Host Database info

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional) Read Only

TABLE_forwarding_host_db_vrf

(Optional) table show fabric forwarding host-db vrf

vrf

(Optional) TODO

vrf_id

(Optional) TODO

vrf_state

(Optional) TODO

vrf_reason

(Optional) TODO

vni_id

(Optional) TODO

refcount

(Optional) TODO

conversational_learning

(Optional) TODO

TABLE_limit_type

(Optional) table for limit type

limit_type

(Optional) TODO

enable

(Optional) TODO

threshold

(Optional) TODO

action

(Optional) TODO

TABLE_ipv4

(Optional) Information for address family IPv4

address_family

(Optional) TODO

vrf

(Optional) TODO

table_id

(Optional) TODO

table_state

(Optional) TODO

refcount

(Optional) TODO

local_hosts

(Optional) TODO

remote_hosts

(Optional) TODO

aggregates

(Optional) TODO

TABLE_aggregate_list

(Optional) table for aggregate subnet prefix list

aggregate_subnet_prefix_list

(Optional) TODO

TABLE_ipv6

(Optional) Information for address family IPv6

address_family

(Optional) TODO

vrf

(Optional) TODO

table_id

(Optional) TODO

table_state

(Optional) TODO

refcount

(Optional) TODO

local_hosts

(Optional) TODO

remote_hosts

(Optional) TODO

aggregates

(Optional) TODO

TABLE_aggregate_list

(Optional) table for aggregate subnet prefix list

aggregate_subnet_prefix_list

(Optional) TODO

aggregate_subnet_prefix_state

(Optional) TODO

Command Mode

  • /exec

show fabric forwarding ip local

show fabric forwarding ip { local-host-db [ { vrf { <vrf-name> | <vrf-known-name> | all } } ] [ <ip-prefix> ] } [ __readonly__ [ TABLE_forwarding_ip_local_host_db_vrf { <hmm_host> <vrf> <status_in> { TABLE_hosts <host> <mac_address> <svi> <flags_0x> <physical_interface> <status> } } ] ]

Syntax Description

show

Show running system information

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

ip

Display IP information

local-host-db

HMM Local Host Database

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

ip-prefix

(Optional) IP prefix in CIDR format

__readonly__

(Optional) Read Only

TABLE_forwarding_ip_local_host_db_vrf

(Optional) table show fabric forwarding ip local-host-db vrf

hmm_host

(Optional) TODO

vrf

(Optional) TODO

status_in

(Optional) TODO

TABLE_hosts

(Optional) table show information for each hosts

host

(Optional) TODO

mac_address

(Optional) TODO

svi

(Optional) TODO

flags_0x

(Optional) TODO

physical_interface

(Optional) TODO

status

(Optional) *-valid, x-deleted, a-aged out, c-cleaned

Command Mode

  • /exec

show fabric forwarding ipv6 local

show fabric forwarding ipv6 { local-host-db [ { vrf { <vrf-name> | <vrf-known-name> | all } } ] [ <ipv6-prefix> ] } [ __readonly__ [ TABLE_forwarding_ipv6_local_host_db_vrf { <hmm_host> <vrf> <status_in> { TABLE_hosts <host> <mac_address> <svi> <flags_0x> <physical_interface> <status> } } ] ]

Syntax Description

show

Show running system information

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

ipv6

Display IPv6 information

local-host-db

HMM Local Host Database

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional) Read Only

TABLE_forwarding_ipv6_local_host_db_vrf

(Optional) table show fabric forwarding ipv6 local-host-db vrf

hmm_host

(Optional) TODO

vrf

(Optional) TODO

status_in

(Optional) TODO

TABLE_hosts

(Optional) table show information for each hosts

host

(Optional) TODO

mac_address

(Optional) TODO

svi

(Optional) TODO

flags_0x

(Optional) TODO

physical_interface

(Optional) TODO

status

(Optional) *-valid, x-deleted, a-aged out, c-cleaned

Command Mode

  • /exec

show fabric multicast globals

show fabric multicast globals [ __readonly__ [ <pruning> ] [ <switch_role> ] [ <fabric_control_seg> ] [ <peer_fabric_ctrl_addr> ] [ <advertise_vpc_rpf_routes> ] [ <created_vni_list> ] [ <fwd_encap> ] [ <mrib_sync_delay> ] [ <bgp_eor_rcvd> ] [ <bgp_eor_rcvd_ts> ] [ <cli_done_rcvd> ] [ <cli_done_rcvd_ts> ] [ <local_nlri_req> ] [ <dist_dr> ] [ <dist_pending> ] [ <spt_only> ] [ <pim_trm_bl> ] [ <pim6_trm_bl> ] [ <l2_trm_evpn> ] ]

Syntax Description

show

Show running system information

fabric

Fabric

multicast

Multicast information

globals

show the global settings

__readonly__

(Optional)

pruning

(Optional)

switch_role

(Optional)

fabric_control_seg

(Optional)

peer_fabric_ctrl_addr

(Optional)

advertise_vpc_rpf_routes

(Optional)

created_vni_list

(Optional)

fwd_encap

(Optional)

mrib_sync_delay

(Optional)

bgp_eor_rcvd

(Optional)

bgp_eor_rcvd_ts

(Optional)

cli_done_rcvd

(Optional)

cli_done_rcvd_ts

(Optional)

local_nlri_req

(Optional)

dist_dr

(Optional)

dist_pending

(Optional)

spt_only

(Optional)

pim_trm_bl

(Optional)

pim6_trm_bl

(Optional)

l2_trm_evpn

(Optional)

Command Mode

  • /exec

show fabric multicast ipv4 l2 vni

show fabric multicast { ipv4 | ipv6 } { l2-mroute } vni { <vni-id> | all } [ __readonly__ TABLE_vni <vnid> [ TABLE_mroute <mroute_desc> [ TABLE_fabric <fabric_node_addr> ] ] ]

Syntax Description

show

Show running system information

fabric

Fabric

multicast

Multicast information

ipv4

Display IP information

ipv6

Display IPv6 information

l2-mroute

display l2-mroute status

vni

Virtual Network Identifier

vni-id

VNI number

all

Display all L2 VNI NGMVPN is aware of

__readonly__

(Optional)

TABLE_vni

(Optional)

vnid

(Optional)

TABLE_mroute

(Optional)

mroute_desc

(Optional)

TABLE_fabric

(Optional)

fabric_node_addr

(Optional)

Command Mode

  • /exec

show fabric multicast statistics

show fabric multicast statistics [ __readonly__ [ <remote_nlri_msgs_rx> ] [ <remote_nlri_msgs_rx_fail> ] [ <local_nlri_msgs_tx> ] [ <local_nlri_msgs_tx_fail> ] [ <import_rt_msgs_tx> ] [ <import_rt_msgs_tx_fail> ] [ <m2rib_msgs_tx> ] [ <m2rib_msgs_tx_fail> ] [ <mrib_msgs_tx> ] [ <mrib_msgs_tx_fail> ] [ <m6rib_msgs_tx> ] [ <m6rib_msgs_tx_fail> ] [ <pim_msgs_tx> ] [ <pim_msgs_tx_fail> ] [ <pim_msgs_rx> ] [ <pim_all_remote_ssm_rp_req_rx> ] [ <pim6_msgs_tx> ] [ <pim6_msgs_tx_fail> ] [ <pim6_msgs_rx> ] [ <pim6_all_remote_ssm_rp_req_rx> ] [ <remote_nlri_ack_tx> ] [ <remote_nlri_ack_tx_fail> ] [ <all_local_nlri_req_rx> ] [ <local_nlri_ack_rx> ] [ <remote_route_req_tx> ] [ <remote_route_req_tx_fail> ] [ <pim6_all_local_ssm_rp_req_tx> ] [ <pim6_all_local_ssm_rp_req_tx_fail> ] [ <igmp_local_route_rx> ] [ <igmp_local_route_ack_rx> ] [ <igmp_msgs_tx> ] [ <igmp_msgs_tx_fail> ] [ <igmp_l2_vni_up_down_rx> ] [ <mts_q_high_warning_rx> ] [ <mts_q_full_warning_rx> ] ]

Syntax Description

show

Show running system information

fabric

Fabric

multicast

Multicast information

statistics

Show statistics

__readonly__

(Optional)

remote_nlri_msgs_rx

(Optional)

remote_nlri_msgs_rx_fail

(Optional)

local_nlri_msgs_tx

(Optional)

local_nlri_msgs_tx_fail

(Optional)

import_rt_msgs_tx

(Optional)

import_rt_msgs_tx_fail

(Optional)

m2rib_msgs_tx

(Optional)

m2rib_msgs_tx_fail

(Optional)

mrib_msgs_tx

(Optional)

mrib_msgs_tx_fail

(Optional)

m6rib_msgs_tx

(Optional)

m6rib_msgs_tx_fail

(Optional)

pim_msgs_tx

(Optional)

pim_msgs_tx_fail

(Optional)

pim_msgs_rx

(Optional)

pim_all_remote_ssm_rp_req_rx

(Optional)

pim6_msgs_tx

(Optional)

pim6_msgs_tx_fail

(Optional)

pim6_msgs_rx

(Optional)

pim6_all_remote_ssm_rp_req_rx

(Optional)

remote_nlri_ack_tx

(Optional)

remote_nlri_ack_tx_fail

(Optional)

all_local_nlri_req_rx

(Optional)

local_nlri_ack_rx

(Optional)

remote_route_req_tx

(Optional)

remote_route_req_tx_fail

(Optional)

pim6_all_local_ssm_rp_req_tx

(Optional)

pim6_all_local_ssm_rp_req_tx_fail

(Optional)

igmp_local_route_rx

(Optional)

igmp_local_route_ack_rx

(Optional)

igmp_msgs_tx

(Optional)

igmp_msgs_tx_fail

(Optional)

igmp_l2_vni_up_down_rx

(Optional)

mts_q_high_warning_rx

(Optional)

mts_q_full_warning_rx

(Optional)

Command Mode

  • /exec

show fabric multicast vrf

show fabric multicast vrf [ { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_vrf <context_name> [ <context_id> ] [ <vprime_iod> ] [ <vnid> ] [ <l3trm> ] [ <iropt> ] ]

Syntax Description

show

Show running system information

fabric

Fabric

multicast

Multicast information

vrf

Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display all VRFs NGMVPN is aware of

__readonly__

(Optional)

TABLE_vrf

(Optional)

context_name

(Optional)

context_id

(Optional)

vprime_iod

(Optional)

vnid

(Optional)

l3trm

(Optional)

iropt

(Optional)

Command Mode

  • /exec

show fabric switch information

show fabric switch information [ vsan <i0> ]

Syntax Description

show

Show running system information

fabric

Show Fabric Information

switch

Show switch details.

information

Show switch model, version and other details

vsan

(Optional) VSAN id

i0

(Optional) VSAN range

Command Mode

  • /exec

show fc2 bind

show fc2 bind [ __readonly__ { TABLE_fc2bind <SOCKET> <FLAGS> <NLEVEL> <RULE> <SINDEX> <VSAN> <D_ID> <MASK> <TYPE> <SUBTYPE> <M_VALUES> } ]

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

bind

show fc2 socket bindings

__readonly__

(Optional) Read only

TABLE_fc2bind

(Optional) show fc2 bind

SOCKET

(Optional) socket

FLAGS

(Optional) flags

NLEVEL

(Optional) nlevel

RULE

(Optional) rule

SINDEX

(Optional) sidnex

VSAN

(Optional) vsan

D_ID

(Optional) d_id

MASK

(Optional) mask

TYPE

(Optional) type

SUBTYPE

(Optional) subtype

M_VALUES

(Optional) m_values

Command Mode

  • /exec

show fc2 classf

show fc2 classf [ __readonly__ { TABLE_fc2classf <HIX> <VSAN> <S_ID> <D_ID> <IFIDX> <R_A_TOV> <E_D_TOV> <F-SO> <RC> <RS> <CS> <EE> <2-SO> <RS> <3-SO> <RS> <EECNT> <TCCNT> <FCNT> <REFCNT> } ]

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

classf

show fc2 classf sessions

__readonly__

(Optional) Read only

TABLE_fc2classf

(Optional) show fc2 classf

HIX

(Optional) hix

VSAN

(Optional) vsan

S_ID

(Optional) sid

D_ID

(Optional) did

IFIDX

(Optional) ifidx

R_A_TOV

(Optional) r_a_tov

E_D_TOV

(Optional) e_d_tov

F-SO

(Optional) f-so

RC

(Optional) rc

RS

(Optional) rs

CS

(Optional) cs

EE

(Optional) ee

2-SO

(Optional) 2-so

RS

(Optional) rs

3-SO

(Optional) 3-so

RS

(Optional) rs

EECNT

(Optional) eecnt

TCCNT

(Optional) tccnt

FCNT

(Optional) fcnt

REFCNT

(Optional) refcnt

Command Mode

  • /exec

show fc2 exchange

show fc2 exchange [ __readonly__ { TABLE_ExchngInfo [ <ECB_INUSE> ] [ <ECB_DROPPED> ] [ <ECB_TOTAL> ] [ <ECB_MAX> ] } [ TABLE_fc2exchange <HIX> <VSAN> <X_ID> <OX_ID> <RX_ID> <O_ID> <R_ID> <ESTAT> <STATE> <SOCKET> <DIFINDEX> <CS> <TYPE> <SEQID> <TCNT> <RCNT> <LO> <HI> <SSTAT> <LOGIN> ] ]

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

exchange

show fc2 active exchanges

__readonly__

(Optional) Read only

TABLE_ExchngInfo

(Optional) ecb info

ECB_INUSE

(Optional) ecb in use

ECB_DROPPED

(Optional) ecb dropped

ECB_TOTAL

(Optional) ecb total

ECB_MAX

(Optional) ecb threshold

TABLE_fc2exchange

(Optional) show fc2 exchange

HIX

(Optional) hix

VSAN

(Optional) vsan

X_ID

(Optional) xid

OX_ID

(Optional) oxid

RX_ID

(Optional) rxid

O_ID

(Optional) o_id

R_ID

(Optional) r_id

ESTAT

(Optional) estat

STATE

(Optional) state

SOCKET

(Optional) socket

DIFINDEX

(Optional) dIFINDEX

CS

(Optional) cs

TYPE

(Optional) type

SEQID

(Optional) seqid

TCNT

(Optional) tcnt

RCNT

(Optional) rcnt

LO

(Optional) lo

HI

(Optional) hi

SSTAT

(Optional) sstat

LOGIN

(Optional) login

Command Mode

  • /exec

show fc2 exchresp

show fc2 exchresp [ __readonly__ { TABLE_fc2exchresp <HIX> <VSAN> <OX_ID> <S_ID> <CS> <SIFINDEX> <OX_ID2> <RX_ID2> <O_ID> <R_ID> <ESTAT> <STATE> <SOCKET> <TYPE> <SEQID> <TCNT> <RCNT> <LO> <HI> <SSTAT> } ]

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

exchresp

show fc2 active responder exchanges

__readonly__

(Optional) Read only

TABLE_fc2exchresp

(Optional) show fc2 exchresp

HIX

(Optional) hix

VSAN

(Optional) vsan

OX_ID

(Optional) oxid

S_ID

(Optional) sid

CS

(Optional) cs

SIFINDEX

(Optional) sifindex

OX_ID2

(Optional) oxid

RX_ID2

(Optional) rxid

O_ID

(Optional) oid

R_ID

(Optional) rid

ESTAT

(Optional) estat

STATE

(Optional) state

SOCKET

(Optional) socket

TYPE

(Optional) type

SEQID

(Optional) seqid

TCNT

(Optional) tcnt

RCNT

(Optional) rcnt

LO

(Optional) lo

HI

(Optional) hi

SSTAT

(Optional) sstat

Command Mode

  • /exec

show fc2 flogi

show fc2 flogi [ __readonly__ { TABLE_fc2flogi <HIX> <VSAN> <S_ID> <FLOGI> <IFINDEX> <TYPE> } ]

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

flogi

show fc2 flogi table

__readonly__

(Optional) Read only

TABLE_fc2flogi

(Optional) show fc2 flogi

HIX

(Optional) hix

VSAN

(Optional) vsan

S_ID

(Optional) sid

FLOGI

(Optional) flogi

IFINDEX

(Optional) ifindex

TYPE

(Optional) type

Command Mode

  • /exec

show fc2 nport

show fc2 nport [ __readonly__ { TABLE_fc2nport <REF> <VSAN> <D_ID> <MASK> <FL> <ST> <IFINDEX> <CF> <TC> <2-SO> <IC> <RC> <RS> <CS> <EE> <3-SO> <3-SO-IC> <3-SO-RC> <3-SO-RS> <3-SO-CS> <3-SO-EE> } ]

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

nport

show fc2 local nports

__readonly__

(Optional) Read only

TABLE_fc2nport

(Optional) show fc2 nport

REF

(Optional) ref

VSAN

(Optional) vsan

D_ID

(Optional) did

MASK

(Optional) mask

FL

(Optional) fl

ST

(Optional) st

IFINDEX

(Optional) ifindex

CF

(Optional) cf

TC

(Optional) tc

2-SO

(Optional) 2so

IC

(Optional) ic

RC

(Optional) rc

RS

(Optional) rs

CS

(Optional) cs

EE

(Optional) ee

3-SO

(Optional) 3so

3-SO-IC

(Optional) 3so-ic

3-SO-RC

(Optional) 3so-rc

3-SO-RS

(Optional) 3so-rs

3-SO-CS

(Optional) 3so-cs

3-SO-EE

(Optional) 3so-ee

Command Mode

  • /exec

show fc2 plogi

show fc2 plogi [ __readonly__ { TABLE_fc2plogi <HIX> <ADDRESS> <VSAN> <S_ID> <D_ID> <IF_INDEX> <FL> <STATE> <CF> <TC> <2-SO> <IC> <RC> <RS> <CS> <EE> <3-SO> <3SO_IC> <3SO_RC> <3SO_RS> <3SO_CS> <3SO_EE> <EECNT> <TCCNT> <2CNT> <3CNT> <REFCNT> } ]

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

plogi

show fc2 plogi sessions

__readonly__

(Optional) Read only

TABLE_fc2plogi

(Optional) show fc2 plogi

HIX

(Optional) hix

ADDRESS

(Optional) address

VSAN

(Optional) vsan

S_ID

(Optional) sid

D_ID

(Optional) did

IF_INDEX

(Optional) ifindex

FL

(Optional) fl

STATE

(Optional) state

CF

(Optional) cf

TC

(Optional) tc

2-SO

(Optional) 2so

IC

(Optional) ic

RC

(Optional) rc

RS

(Optional) rs

CS

(Optional) cs

EE

(Optional) ee

3-SO

(Optional) 3so

3SO_IC

(Optional) ic

3SO_RC

(Optional) rc

3SO_RS

(Optional) rs

3SO_CS

(Optional) cs

3SO_EE

(Optional) ee

EECNT

(Optional) eecnt

TCCNT

(Optional) TCCNT

2CNT

(Optional) 2cnt

3CNT

(Optional) 3cnt

REFCNT

(Optional) refcnt

Command Mode

  • /exec

show fc2 plogi_pwwn

show fc2 plogi_pwwn [ __readonly__ { TABLE_fc2plogi_pwwn <HIX> <ADDRESS> <VSAN> <S_ID> <D_ID> <IFINDEX> <FL> <STATE> <PWWN> } ]

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

plogi_pwwn

show fc2 plogi pwwn entries

__readonly__

(Optional) Read only

TABLE_fc2plogi_pwwn

(Optional) show fc2 plogi_pwwn

HIX

(Optional) hix

ADDRESS

(Optional) address

VSAN

(Optional) vsan

S_ID

(Optional) s_id

D_ID

(Optional) d_id

IFINDEX

(Optional) ifindex

FL

(Optional) fl

STATE

(Optional) state

PWWN

(Optional) pwwn

Command Mode

  • /exec

show fc2 port brief

show fc2 port brief [ __readonly__ { TABLE_fc2portbrief <BAD_FRAME_RX> } [ TABLE_FCSTAT <IX> <ST> <MOD> <EMUL> <TXPKTS> <TXDROP> <TXERR> <RXPKTS> <RXDROP> ] [ TABLE_LBSTAT <IX> <ST> <MOD> <EMUL> <TXLBPKTS> <TXLBDROP> <RXLBPKTS> <RXLBDROP> ] [ TABLE_VFCSTAT <IX> <ST> <MOD> <EMUL> <TXPKTS> <TXDROP> <TXERR> <RXPKTS> <RXDROP> ] [ TABLE_VFCPOSTAT <IX> <ST> <MOD> <EMUL> <TXPKTS> <TXDROP> <TXERR> <RXPKTS> <RXDROP> ] [ TABLE_VFCSLOTSTAT <IX> <ST> <MOD> <EMUL> <TXPKTS> <TXDROP> <TXERR> <RXPKTS> <RXDROP> ] ]

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

port

show fc2 physical port table

brief

display only active port counters

__readonly__

(Optional) Read only

TABLE_fc2portbrief

(Optional) bad frames received

BAD_FRAME_RX

(Optional) fc2 bad frames rx

TABLE_FCSTAT

(Optional) FC Stat table

IX

(Optional) index

ST

(Optional) status

MOD

(Optional) mode

EMUL

(Optional) TEemul

TXPKTS

(Optional) txpackets

TXDROP

(Optional) txdrops

TXERR

(Optional) txerrorcnt

RXPKTS

(Optional) rx packets

RXDROP

(Optional) rx drop

TABLE_LBSTAT

(Optional) LB Stat table

IX

(Optional) index

ST

(Optional) status

MOD

(Optional) mode

EMUL

(Optional) TEemul

TXLBPKTS

(Optional) tx lb packets

TXLBDROP

(Optional) tx lb drops

RXLBPKTS

(Optional) rx lb packets

RXLBDROP

(Optional) rx lb drop

TABLE_VFCSTAT

(Optional) VFC Stat table

IX

(Optional) index

ST

(Optional) status

MOD

(Optional) mode

EMUL

(Optional) TEemul

TXPKTS

(Optional) txpackets

TXDROP

(Optional) txdrops

TXERR

(Optional) txerrorcnt

RXPKTS

(Optional) rx packets

RXDROP

(Optional) rx drop

TABLE_VFCPOSTAT

(Optional) VFC po Stat table

IX

(Optional) index

ST

(Optional) status

MOD

(Optional) mode

EMUL

(Optional) TEemul

TXPKTS

(Optional) txpackets

TXDROP

(Optional) txdrops

TXERR

(Optional) txerrorcnt

RXPKTS

(Optional) rx packets

RXDROP

(Optional) rx drop

TABLE_VFCSLOTSTAT

(Optional) VFC slot Stat table

IX

(Optional) index

ST

(Optional) status

MOD

(Optional) mode

EMUL

(Optional) TEemul

TXPKTS

(Optional) txpackets

TXDROP

(Optional) txdrops

TXERR

(Optional) txerrorcnt

RXPKTS

(Optional) rx packets

RXDROP

(Optional) rx drop

Command Mode

  • /exec

show fc2 port drops

show fc2 port drops [ __readonly__ [ TABLE_FCSTAT <IX> <ST> <MOD> <EMUL> <TXPKTS> <TXDROP> <TXERR> <RXPKTS> <RXDROP> ] [ TABLE_LBSTAT <IX> <ST> <MOD> <EMUL> <TXLBPKTS> <TXLBDROP> <RXLBPKTS> <RXLBDROP> ] [ TABLE_VFCSTAT <IX> <ST> <MOD> <EMUL> <TXPKTS> <TXDROP> <TXERR> <RXPKTS> <RXDROP> ] [ TABLE_VFCPOSTAT <IX> <ST> <MOD> <EMUL> <TXPKTS> <TXDROP> <TXERR> <RXPKTS> <RXDROP> ] [ TABLE_VFCSLOTSTAT <IX> <ST> <MOD> <EMUL> <TXPKTS> <TXDROP> <TXERR> <RXPKTS> <RXDROP> ] ]

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

port

show fc2 physical port table

drops

display active port drop counters

__readonly__

(Optional) Read only

TABLE_FCSTAT

(Optional) FC Stat table

IX

(Optional) index

ST

(Optional) status

MOD

(Optional) mode

EMUL

(Optional) TEemul

TXPKTS

(Optional) txpackets

TXDROP

(Optional) txdrops

TXERR

(Optional) txerrorcnt

RXPKTS

(Optional) rx packets

RXDROP

(Optional) rx drop

TABLE_LBSTAT

(Optional) LB Stat table

IX

(Optional) index

ST

(Optional) status

MOD

(Optional) mode

EMUL

(Optional) TEemul

TXLBPKTS

(Optional) tx lb packets

TXLBDROP

(Optional) tx lb drops

RXLBPKTS

(Optional) rx lb packets

RXLBDROP

(Optional) rx lb drop

TABLE_VFCSTAT

(Optional) VFC Stat table

IX

(Optional) index

ST

(Optional) status

MOD

(Optional) mode

EMUL

(Optional) TEemul

TXPKTS

(Optional) txpackets

TXDROP

(Optional) txdrops

TXERR

(Optional) txerrorcnt

RXPKTS

(Optional) rx packets

RXDROP

(Optional) rx drop

TABLE_VFCPOSTAT

(Optional) VFC po Stat table

IX

(Optional) index

ST

(Optional) status

MOD

(Optional) mode

EMUL

(Optional) TEemul

TXPKTS

(Optional) txpackets

TXDROP

(Optional) txdrops

TXERR

(Optional) txerrorcnt

RXPKTS

(Optional) rx packets

RXDROP

(Optional) rx drop

TABLE_VFCSLOTSTAT

(Optional) VFC slot Stat table

IX

(Optional) index

ST

(Optional) status

MOD

(Optional) mode

EMUL

(Optional) TEemul

TXPKTS

(Optional) txpackets

TXDROP

(Optional) txdrops

TXERR

(Optional) txerrorcnt

RXPKTS

(Optional) rx packets

RXDROP

(Optional) rx drop

Command Mode

  • /exec

show fc2 port state

show fc2 port state [ __readonly__ [ TABLE_FCPORTSTATE [ <PORT_STRING> ] [ <PORT_NO> ] [ <UP_DOWN_CNTR> ] [ [ <UP_STRING> ] + [ <UP_TIME> ] + [ <UP_REFTIME> ] + [ <DOWN_STRING> ] + [ <DOWN_TIME> ] + [ <DOWN_REFTIME> ] + ] + ] [ TABLE_VFCPORTSTATE [ <PORT_STRING> ] [ <PORT_NO> ] [ <UP_DOWN_CNTR> ] [ [ <UP_STRING> ] + [ <UP_TIME> ] + [ <UP_REFTIME> ] + [ <DOWN_STRING> ] + [ <DOWN_TIME> ] + [ <DOWN_REFTIME> ] + ] + ] [ TABLE_VFCPOPORTSTATE [ <PORT_STRING> ] [ <PORT_NO> ] [ <UP_DOWN_CNTR> ] [ [ <UP_STRING> ] + [ <UP_TIME> ] + [ <UP_REFTIME> ] + [ <DOWN_STRING> ] + [ <DOWN_TIME> ] + [ <DOWN_REFTIME> ] + ] + ] [ TABLE_VFCPORTSLOTSTATE [ <PORT_STRING> ] [ <PORT_NO> ] [ <UP_DOWN_CNTR> ] [ [ <UP_STRING> ] + [ <UP_TIME> ] + [ <UP_REFTIME> ] + [ <DOWN_STRING> ] + [ <DOWN_TIME> ] + [ <DOWN_REFTIME> ] + ] + ] ]

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

port

show fc2 physical port table

state

display port state history

__readonly__

(Optional) Read only

TABLE_FCPORTSTATE

(Optional) fc port state change history

PORT_STRING

(Optional) port name

PORT_NO

(Optional) port number

UP_DOWN_CNTR

(Optional) up-down counter

UP_STRING

(Optional) up

UP_TIME

(Optional) up time

UP_REFTIME

(Optional) up from

DOWN_STRING

(Optional) down string

DOWN_TIME

(Optional) down time

DOWN_REFTIME

(Optional) down from

TABLE_VFCPORTSTATE

(Optional) vfc port state change history

PORT_STRING

(Optional) port name

PORT_NO

(Optional) port number

UP_DOWN_CNTR

(Optional) up-down counter

UP_STRING

(Optional) up

UP_TIME

(Optional) up time

UP_REFTIME

(Optional) up from

DOWN_STRING

(Optional) down string

DOWN_TIME

(Optional) down time

DOWN_REFTIME

(Optional) down from

TABLE_VFCPOPORTSTATE

(Optional) vfc po port state change history

PORT_STRING

(Optional) port name

PORT_NO

(Optional) port number

UP_DOWN_CNTR

(Optional) up-down counter

UP_STRING

(Optional) up

UP_TIME

(Optional) up time

UP_REFTIME

(Optional) up from

DOWN_STRING

(Optional) down string

DOWN_TIME

(Optional) down time

DOWN_REFTIME

(Optional) down from

TABLE_VFCPORTSLOTSTATE

(Optional) vfc port slot state change history

PORT_STRING

(Optional) port name

PORT_NO

(Optional) port number

UP_DOWN_CNTR

(Optional) up-down counter

UP_STRING

(Optional) up

UP_TIME

(Optional) up time

UP_REFTIME

(Optional) up from

DOWN_STRING

(Optional) down string

DOWN_TIME

(Optional) down time

DOWN_REFTIME

(Optional) down from

Command Mode

  • /exec

show fc2 socket

show fc2 socket [ __readonly__ { TABLE_fc2socket <SOCKET> <REFCNT> <PROTOCOL> <FLAGS> <PID> <RCVBUF> <RMEM_USED> <QLEN> <NOTSK> } ]

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

socket

show fc2 active sockets

__readonly__

(Optional) Read only

TABLE_fc2socket

(Optional) show fc2 socket

SOCKET

(Optional) socket

REFCNT

(Optional) refcnt

PROTOCOL

(Optional) protocol

FLAGS

(Optional) flags

PID

(Optional) pid

RCVBUF

(Optional) rcvbuf

RMEM_USED

(Optional) rmem_used

QLEN

(Optional) qlen

NOTSK

(Optional) not_sk

Command Mode

  • /exec

show fc2 sockexch

show fc2 sockexch [ __readonly__ { TABLE_fc2sockexch <SOCKET> <VSAN> <X_ID> <OX_ID> <RX_ID> <O_ID> <R_ID> <ESTAT> <STATE> <CS> <TYPE> <SK> } ]

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

sockexch

show fc2 active exchanges for each socket

__readonly__

(Optional) Read only

TABLE_fc2sockexch

(Optional) show fc2 sockexch

SOCKET

(Optional) socket

VSAN

(Optional) vsan

X_ID

(Optional) x_id

OX_ID

(Optional) oxid

RX_ID

(Optional) rxid

O_ID

(Optional) o_id

R_ID

(Optional) r_id

ESTAT

(Optional) estat

STATE

(Optional) state

CS

(Optional) cs

TYPE

(Optional) type

SK

(Optional) sk

Command Mode

  • /exec

show fc2 socknotify

show fc2 socknotify [ __readonly__ { TABLE_fc2socknotify <SOCKET> <ADDRESS> <REF> <VSAN> <D_ID> <MASK> <FL> <ST> <IFINDEX> } ]

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

socknotify

show fc2 local nport plogi/logo notifications per each socket

__readonly__

(Optional) Read only

TABLE_fc2socknotify

(Optional) show fc2 socknotify

SOCKET

(Optional) socket

ADDRESS

(Optional) address

REF

(Optional) ref

VSAN

(Optional) vsan

D_ID

(Optional) d_id

MASK

(Optional) mask

FL

(Optional) fl

ST

(Optional) st

IFINDEX

(Optional) ifindex

Command Mode

  • /exec

show fc2 socknport

show fc2 socknport [ __readonly__ { TABLE_fc2socknport <SOCKET> <ADDRESS> <REF> <VSAN> <D_ID> <MASK> <FL> <ST> <IFINDEX> } ]

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

socknport

show fc2 local nports per each socket

__readonly__

(Optional) Read only

TABLE_fc2socknport

(Optional) show fc2 socknport

SOCKET

(Optional) socket

ADDRESS

(Optional) address

REF

(Optional) ref

VSAN

(Optional) vsan

D_ID

(Optional) d_id

MASK

(Optional) mask

FL

(Optional) fl

ST

(Optional) st

IFINDEX

(Optional) ifindex

Command Mode

  • /exec

show fc2 vsan

show fc2 vsan [ __readonly__ { TABLE_fc2vsan <VSAN> <X_ID> <E_D_TOV> <R_A_TOV> <WWN> <IOP_MODE> } ]

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

vsan

show fc2 vsan table

__readonly__

(Optional) Read only

TABLE_fc2vsan

(Optional) show fc2 vsan

VSAN

(Optional) vsan

X_ID

(Optional) xid

E_D_TOV

(Optional) e_d_tov

R_A_TOV

(Optional) r_a_tov

WWN

(Optional) wwn

IOP_MODE

(Optional) iop_mode

Command Mode

  • /exec

show fcalias

show fcalias [ [ name <s0> ] [ [ pending ] [ vsan <i0> ] ] ]

Syntax Description

show

Show running system information

fcalias

Fcalias show commands

name

(Optional) Show members of a specified fcalias

s0

(Optional) Enter the name of fcalias

pending

(Optional) Show members of a specified fcalias in session

vsan

(Optional) Show aliases belonging to the specified VSAN

i0

(Optional) VSAN id range

Command Mode

  • /exec

show fcdomain

show fcdomain

Syntax Description

show

Show running system information

fcdomain

Show fcdomain information

Command Mode

  • /exec

show fcdomain address-allocation

show fcdomain address-allocation [ { cache | vsan <i0> } ]

Syntax Description

show

Show running system information

fcdomain

Show fcdomain information

address-allocation

Show statistics for the fcid allocation

cache

(Optional) Show cache content for the fcid allocation

vsan

(Optional) Specify the vsan id

i0

(Optional) VSAN id

Command Mode

  • /exec

show fcdomain allowed

show fcdomain allowed [ vsan <i0> ]

Syntax Description

show

Show running system information

fcdomain

Show fcdomain information

allowed

Show list of allowed domain IDs

vsan

(Optional) Specify the vsan id

i0

(Optional) VSAN id

Command Mode

  • /exec

show fcdomain domain-list

show fcdomain domain-list [ vsan <i0> ]

Syntax Description

show

Show running system information

fcdomain

Show fcdomain information

domain-list

Show list of domain IDs granted by the principal sw

vsan

(Optional) Specify the vsan id

i0

(Optional) VSAN id

Command Mode

  • /exec

show fcdomain fcid persistent

show fcdomain fcid persistent [ { unused [ vsan <i0> ] | vsan1 <i1> } ]

Syntax Description

show

Show running system information

fcdomain

Show fcdomain information

fcid

Show persistent FCIDs (across reboot)

persistent

Show persistent FCIDs (across reboot)

unused

(Optional) Show unused persistent FCIDs (across reboot)

vsan

(Optional) Specify the vsan id

i0

(Optional) VSAN id

vsan1

(Optional) Specify the vsan id

i1

(Optional) VSAN id

Command Mode

  • /exec

show fcdomain pending-diff

show fcdomain pending-diff [ vsan <i0> ]

Syntax Description

show

Show running system information

fcdomain

Show fcdomain information

pending-diff

Show the difference between running and pending configuration

vsan

(Optional) Specify the vsan id

i0

(Optional) VSAN id

Command Mode

  • /exec

show fcdomain pending

show fcdomain pending [ vsan <i0> ]

Syntax Description

show

Show running system information

fcdomain

Show fcdomain information

pending

Show the pending configuration

vsan

(Optional) Specify the vsan id

i0

(Optional) VSAN id

Command Mode

  • /exec

show fcdomain session-status

show fcdomain session-status [ vsan <i0> ]

Syntax Description

show

Show running system information

fcdomain

Show fcdomain information

session-status

Show the last action performed by fcdomain

vsan

(Optional) Specify the vsan id

i0

(Optional) VSAN id

Command Mode

  • /exec

show fcdomain statistics

show fcdomain statistics [ { interface <if0> [ vsan <i0> ] | vsan1 <i1> } ]

Syntax Description

show

Show running system information

fcdomain

Show fcdomain information

statistics

Show the statistics of fcdomain

interface

(Optional) Specify the fibre channel interface

if0

(Optional)

vsan

(Optional) Specify the vsan id

i0

(Optional) VSAN id

vsan1

(Optional) Specify the vsan id

i1

(Optional) VSAN id

Command Mode

  • /exec

show fcdomain status

show fcdomain status

Syntax Description

show

Show running system information

fcdomain

Show fcdomain information

status

Show all vsan-independent information in fcdomain

Command Mode

  • /exec

show fcdomain vsan

show fcdomain vsan <i0>

Syntax Description

show

Show running system information

fcdomain

Show fcdomain information

vsan

Specify the vsan id

i0

VSAN id

Command Mode

  • /exec

show fcdroplatency

show fcdroplatency [ { network | switch } ] [ __readonly__ [ <switch_latency> ] [ <global_network_latency> ] [ TABLE_vsan_network_latency { <vsan-no> <network-latency> } ] ]

Syntax Description

show

Show running system information

fcdroplatency

show switch or network latency

network

(Optional) network latency in milliseconds

switch

(Optional) switch latency in milliseconds

__readonly__

(Optional)

switch_latency

(Optional) Switch latency value

global_network_latency

(Optional) global network latency value

TABLE_vsan_network_latency

(Optional) VSAN specific network latency settings

vsan-no

(Optional) vsan number

network-latency

(Optional) VSAN specific network latency

Command Mode

  • /exec

show fcid-allocation area

show fcid-allocation area

Syntax Description

show

Show running system information

fcid-allocation

Show information about fcid-allocation list

area

Show information about fcid-allocation list

Command Mode

  • /exec

show fcid-allocation company-id-from-wwn

show fcid-allocation company-id-from-wwn <wwn0>

Syntax Description

show

Show running system information

fcid-allocation

Show information about fcid-allocation list

company-id-from-wwn

Company id (or OUI).

wwn0

Enter WWN to extract company_id/oui

Command Mode

  • /exec

show fcns database

show fcns database [ { detail [ vsan <i0> ] | domain <i1> [ { detail [ vsan1 <i2> ] | vsan2 <i3> } ] | fcid <fcid4> { detail2 vsan3 <i5> | vsan4 <i6> } | local [ { detail1 [ vsan5 <i7> ] | vsan6 <i8> } ] | npv [ { detail1 [ vsan7 <i9> ] | node_wwn <wwn10> [ vsan8 <i11> ] | vsan9 <i12> } ] | proxy-host { detail4 vsan10 <i13> | vsan11 <i14> } | vsan12 <i15> } ]

Syntax Description

show

Show running system information

fcns

show name server tables

database

show name server database

detail

(Optional) show all objects in each entry

vsan

(Optional) show local entries for the given vsan(s)

i0

(Optional) VSAN id range

domain

(Optional) show entries in a domain

i1

(Optional) domain-id

detail

(Optional) show all objects in each entry

vsan1

(Optional) show entries for a domain for the given vsan(s)

i2

(Optional) VSAN id range

vsan2

(Optional) show entries for a domain for the given vsan(s)

i3

(Optional) VSAN id range

fcid

(Optional) show entry for the given port

fcid4

(Optional) enter FCID

detail2

(Optional) show all objects in the entry

vsan3

(Optional) show port entry for the given vsan

i5

(Optional) VSAN id

vsan4

(Optional) show port entry for the given vsan

i6

(Optional) VSAN id

local

(Optional) show local entries

detail1

(Optional) show all objects in each entry

vsan5

(Optional) show local entries for the given vsan(s)

i7

(Optional) VSAN id range

vsan6

(Optional) show local entries for the given vsan(s)

i8

(Optional) VSAN id range

npv

(Optional) show n-port virtualization (npv) entries

detail1

(Optional) show all objects in each entry

vsan7

(Optional) show npv entries for the given vsan(s)

i9

(Optional) VSAN id range

node_wwn

(Optional) show end-devices logged in via an npv node

wwn10

(Optional) Node WWN of NPV

vsan8

(Optional) show npv entries for the given vsan(s)

i11

(Optional) VSAN id range

vsan9

(Optional) show npv entries for the given vsan(s)

i12

(Optional) VSAN id range

proxy-host

(Optional) show entry for the proxy-host

detail4

(Optional) show all objects in the entry

vsan10

(Optional) show port entry for the given vsan

i13

(Optional) VSAN id

vsan11

(Optional) show port entry for the given vsan

i14

(Optional) VSAN id

vsan12

(Optional) show entries for the given vsan(s)

i15

(Optional) VSAN id range

Command Mode

  • /exec

show fcns statistics

show fcns statistics [ { detail [ vsan <i0> ] | vsan1 <i1> } ]

Syntax Description

show

Show running system information

fcns

show name server tables

statistics

show name server statistics

detail

(Optional) show detailed statistics

vsan

(Optional) show detailed statistics for the vsan(s)

i0

(Optional) VSAN id range

vsan1

(Optional) show statistics for the vsan(s)

i1

(Optional) VSAN id range

Command Mode

  • /exec

show fcoe-npv issu-impact

show fcoe-npv issu-impact [ __readonly__ { <is_impact> } [ TABLE_interface <vfc_intf> <fc_id> ] ]

Syntax Description

show

Show running system informationrunning system information

fcoe-npv

feature fcoe-npv

issu-impact

Show feature fcoe-npv config issues if attempting to do non-disruptive ISSU

__readonly__

(Optional) Read Only

is_impact

(Optional) show issu impact

TABLE_interface

(Optional) show fcoe database

vfc_intf

(Optional) vfc port Interface index

fc_id

(Optional) vfc port FCID

Command Mode

  • /exec

show fcoe

show fcoe [ __readonly__ { TABLE_fcf <fcf_if_index> <fcf_mac> <fc_map> <fcf_priority> <fka_Advertisement> } [ TABLE_vfc <vfc_name> <vfcf_mac> ] ]

Syntax Description

show

Show running system information

fcoe

Show FCOE paramaters

__readonly__

(Optional) Read Only

TABLE_fcf

(Optional) fcf table

fcf_if_index

(Optional) fcf if index

fcf_mac

(Optional) fcf mac

fc_map

(Optional) fc map

fcf_priority

(Optional) fcf priority

fka_Advertisement

(Optional) fka Advertisement

TABLE_vfc

(Optional) vfc details table for sup

vfc_name

(Optional) vfc name

vfcf_mac

(Optional) vfcf mac

Command Mode

  • /exec

show fcoe database

show fcoe database [ __readonly__ { TABLE_interface <interface> [ <fcid> ] [ <port_name> ] <mac_address> } <flogi_count> [ TABLE_veport <interface> <mac_address> <vsan> ] ]

Syntax Description

show

Show running system information

fcoe

Show FCOE paramaters

database

Show FCOE database

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show fcoe database

fcid

(Optional) fcid

port_name

(Optional) port name

mac_address

(Optional) mac address

interface

(Optional) ve port Interface index

TABLE_veport

(Optional) ve port details

mac_address

(Optional) ve port mac address

flogi_count

(Optional) flogi_count

vsan

(Optional) ve port VSAN trunking

Command Mode

  • /exec

show fcs database

show fcs database [ vsan <i0> ]

Syntax Description

show

Show running system information

database

Show local database of FCS

vsan

(Optional) Show local database for a VSAN

i0

(Optional) VSAN range

Command Mode

  • /exec

show fcs ie

show fcs ie [ { nwwn <wwn0> vsan <i1> | vsan1 <i2> } ]

Syntax Description

show

Show running system information

ie

Show Interconnect Element Objects Information

nwwn

(Optional) IE WWN

wwn0

(Optional) IE WWN

vsan

(Optional) VSAN id of IE

i1

(Optional) VSAN id

vsan1

(Optional) VSAN id of IE

i2

(Optional) VSAN range

Command Mode

  • /exec

show fcs platform

show fcs platform { name <s0> vsan <i0> | vsan1 <i1> }

Syntax Description

show

Show running system information

platform

Show Platform Objects Information

name

Platform Name

s0

Platform name string

vsan

VSAN id of the platform

i0

VSAN id

vsan1

VSAN id of the platform

i1

VSAN range

Command Mode

  • /exec

show fcs port

show fcs port { pwwn <wwn0> vsan <i1> | vsan1 <i2> }

Syntax Description

show

Show running system information

port

Show Port Objects Information

pwwn

Port WWN

wwn0

Port WWN

vsan

VSAN id of the port

i1

VSAN id

vsan1

VSAN id of the port

i2

VSAN range

Command Mode

  • /exec

show fcs statistics

show fcs statistics [ vsan <i0> ]

Syntax Description

show

Show running system information

statistics

Show statistics for FCS packets.

vsan

(Optional) Show statistics for a VSAN

i0

(Optional) VSAN range

Command Mode

  • /exec

show fcs vsan

show fcs vsan

Syntax Description

show

Show running system information

vsan

Show list of all the VSANs and plat-check-mode for each

Command Mode

  • /exec

show fctimer

show fctimer [ __readonly__ { <F_S_TOV> <D_S_TOV> <E_D_TOV> <R_A_TOV> } ]

Syntax Description

show

show running system information

fctimer

show Fibre Channel timers

__readonly__

(Optional) Read only

F_S_TOV

(Optional) F_S_TOV

D_S_TOV

(Optional) D_S_TOV

E_D_TOV

(Optional) E_D_TOV

R_A_TOV

(Optional) R_A_TOV

Command Mode

  • /exec

show fctimer D_S_TOV

show fctimer D_S_TOV [ vsan <i0> ] [ __readonly__ [ TABLE_D_S_TOV [ <vsan-no> ] <D_S_TOV> ] [ <non-exist-vsan> ] ]

Syntax Description

show

Show running system information

fctimer

show Fibre Channel timers

D_S_TOV

D_S_TOV in milliseconds

vsan

(Optional) Specify VSAN id

i0

(Optional) VSAN id range

__readonly__

(Optional)

TABLE_D_S_TOV

(Optional) table D_S_TOV

vsan-no

(Optional) vsan number

D_S_TOV

(Optional) D_S_TOV

non-exist-vsan

(Optional) non configured vsans

Command Mode

  • /exec

show fctimer E_D_TOV

show fctimer E_D_TOV [ vsan <i0> ] [ __readonly__ [ TABLE_E_D_TOV [ <vsan-no> ] <E_D_TOV> ] [ <non-exist-vsan> ] ]

Syntax Description

show

Show running system information

fctimer

show Fibre Channel timers

E_D_TOV

E_D_TOV in milliseconds

vsan

(Optional) Specify VSAN id

i0

(Optional) VSAN id range

__readonly__

(Optional)

TABLE_E_D_TOV

(Optional) table

vsan-no

(Optional) vsan number

E_D_TOV

(Optional) E_D_TOV

non-exist-vsan

(Optional) not exist vsans

Command Mode

  • /exec

show fctimer F_S_TOV

show fctimer F_S_TOV [ vsan <i0> ] [ __readonly__ [ TABLE_F_S_TOV [ <vsan-no> ] <F_S_TOV> ] [ <non-exist-vsan> ] ]

Syntax Description

show

Show running system information

fctimer

show Fibre Channel timers

F_S_TOV

F_S_TOV in milliseconds

vsan

(Optional) Specify VSAN id

i0

(Optional) VSAN id range

__readonly__

(Optional)

TABLE_F_S_TOV

(Optional) table

vsan-no

(Optional) vsan number

F_S_TOV

(Optional) F_S_TOV

non-exist-vsan

(Optional) not exist vsans

Command Mode

  • /exec

show fctimer R_A_TOV

show fctimer R_A_TOV [ vsan <i0> ] [ __readonly__ [ TABLE_R_A_TOV [ <vsan-no> ] <R_A_TOV> ] [ <non-exist-vsan> ] ]

Syntax Description

show

Show running system information

fctimer

show Fibre Channel timers

R_A_TOV

R_A_TOV in milliseconds

vsan

(Optional) Specify VSAN id

i0

(Optional) VSAN id range

__readonly__

(Optional)

TABLE_R_A_TOV

(Optional) table

vsan-no

(Optional) vsan number

R_A_TOV

(Optional) R_A_TOV

non-exist-vsan

(Optional) non exist vsans

Command Mode

  • /exec

show fctimer last action status

show fctimer last action status [ __readonly__ [ <vsan> ] <last_action_timestamp> <last_action> <last_action_result> <last_action_failure_reason> ]

Syntax Description

show

Show running system information

fctimer

show Fibre Channel timers

last

Show the status of the last cfs commit/abort operation

action

Show the status of the last cfs commit/abort operation

status

Show the status of the last cfs commit/abort operation

__readonly__

(Optional) Readonly

vsan

(Optional) Vsan

last_action_timestamp

(Optional) Last action timestamp

last_action

(Optional) Last action

last_action_result

(Optional) Last action result

last_action_failure_reason

(Optional) Last action failure reason

Command Mode

  • /exec

show fctimer pending-diff

show fctimer pending-diff [ __readonly__ <status_fctimer> ]

Syntax Description

show

Show running system information

fctimer

show Fibre Channel timers

pending-diff

Show the difference between pending database and running config

__readonly__

(Optional)

status_fctimer

(Optional) Show the difference between pending database and running config

Command Mode

  • /exec

show fctimer pending

show fctimer pending [ __readonly__ <status_fctimer> ]

Syntax Description

show

Show running system information

fctimer

show Fibre Channel timers

pending

Show the status of pending fctimer commands

__readonly__

(Optional)

status_fctimer

(Optional) Show the status of pending fctimer commands

Command Mode

  • /exec

show fctimer session status

show fctimer session status [ __readonly__ [ <vsan> ] <last_action_timestamp> <last_action> <last_action_result> <last_action_failure_reason> ]

Syntax Description

show

Show running system information

fctimer

show Fibre Channel timers

session

Show the state of fctimer cfs session

status

Show the status of the last cfs commit/abort operation

__readonly__

(Optional) Readonly

vsan

(Optional) Vsan

last_action_timestamp

(Optional) Last action timestamp

last_action

(Optional) Last action

last_action_result

(Optional) Last action result

last_action_failure_reason

(Optional) Last action failure reason

Command Mode

  • /exec

show fctimer status

show fctimer status [ __readonly__ <Distribution> ]

Syntax Description

show

Show running system information

fctimer

show Fibre Channel timers

status

cfs distribution is enabled or disabled

__readonly__

(Optional) read only

Distribution

(Optional) distribution

Command Mode

  • /exec

show fctimer vsan

show fctimer vsan <i0> [ __readonly__ { TABLE_fctimer <vsan-no> <F_S_TOV> <D_S_TOV> <E_D_TOV> <R_A_TOV> } [ <non-exist-vsan> ] ]

Syntax Description

show

Show running system information

fctimer

show Fibre Channel timers

vsan

Specify VSAN id

i0

VSAN id range

__readonly__

(Optional) Read only

TABLE_fctimer

(Optional) table

vsan-no

(Optional) vsan number

F_S_TOV

(Optional) F_S_TOV

D_S_TOV

(Optional) D_S_TOV

E_D_TOV

(Optional) E_D_TOV

R_A_TOV

(Optional) R_A_TOV

non-exist-vsan

(Optional) non exist vsans

Command Mode

  • /exec

show fdmi database

show fdmi database

Syntax Description

show

Show running system information

fdmi

Show fdmi information

database

show fdmi database

Command Mode

  • /exec

show fdmi database detail

show fdmi database detail

Syntax Description

show

Show running system information

fdmi

Show fdmi information

database

show fdmi database

detail

show all objects in each entry

Command Mode

  • /exec

show fdmi database detail hba-id vsan

show fdmi database detail hba-id <wwn0> vsan <i1>

Syntax Description

show

Show running system information

fdmi

Show fdmi information

database

show fdmi database

detail

show all objects in each entry

hba-id

show entries for the given HBA id

wwn0

HBA id

vsan

show HBA id the given vsan

i1

VSAN id

Command Mode

  • /exec

show fdmi database detail vsan

show fdmi database detail vsan <i0>

Syntax Description

show

Show running system information

fdmi

Show fdmi information

database

show fdmi database

detail

show all objects in each entry

vsan

show entries for the given vsan(s)

i0

VSAN id range

Command Mode

  • /exec

show fdmi database vsan

show fdmi database vsan <i0>

Syntax Description

show

Show running system information

fdmi

Show fdmi information

database

show fdmi database

vsan

show entries for the given vsan(s)

i0

VSAN id range

Command Mode

  • /exec

show fdmi suppress-updates

show fdmi suppress-updates

Syntax Description

show

Show running system information

fdmi

Show fdmi information

suppress-updates

Show vsans on which updates are suppressed

Command Mode

  • /exec

show feature-set

show feature-set [ <name> ] [ <id> ] [ __readonly__ TABLE_cfcFeatureSetTable <cfcFeatureSetIndex> <cfcFeatureSetName> <cfcFeatureSetAction> <cfcFeatureSetLastAction> <cfcFeatureSetLastActionResult> <cfcFeatureSetLastFailureReason> <cfcFeatureSetOpStatus> <cfcFeatureSetOpStatusReason> ]

Syntax Description

show

Show running system information

feature-set

Show feature set status

name

(Optional) feature-set name

id

(Optional) feature-set id

__readonly__

(Optional)

TABLE_cfcFeatureSetTable

(Optional) feature-set table

cfcFeatureSetIndex

(Optional) feature-set table index

cfcFeatureSetName

(Optional) feature-set name

cfcFeatureSetAction

(Optional) action

cfcFeatureSetLastAction

(Optional) last action

cfcFeatureSetLastActionResult

(Optional) last action result

cfcFeatureSetLastFailureReason

(Optional) last failure reason

cfcFeatureSetOpStatus

(Optional) operation status

cfcFeatureSetOpStatusReason

(Optional) operation status

Command Mode

  • /exec

show feature-set services

show feature-set services <s0> [ __readonly__ [ { TABLE_services <service_name> } ] { <count> <feature_set> } ]

Syntax Description

show

Show running system information

feature-set

Show feature set status

services

Show services in feature set

__readonly__

(Optional)

TABLE_services

(Optional) all service names in feature set

service_name

(Optional) name of the service

count

(Optional) number of services in the feature set

feature_set

(Optional) feature set name

s0

Name of feature set

Command Mode

  • /exec

show feature

show feature [ __readonly__ [ { TABLE_cfcFeatureCtrlTable <cfcFeatureCtrlIndex2> <cfcFeatureCtrlInstanceNum2> <cfcFeatureCtrlName2> <cfcFeatureCtrlAction2> <cfcFeatureCtrlLastAction2> <cfcFeatureCtrlLastActionResult2> <cfcFeatureCtrlLastFailureReason2> <cfcFeatureCtrlOpStatus2> <cfcFeatureCtrlOpStatusReason2> <cfcFeatureCtrlTag2> } ] ]

Syntax Description

show

Show running system information

feature

Show feature status

__readonly__

(Optional)

TABLE_cfcFeatureCtrlTable

(Optional) feature table

cfcFeatureCtrlIndex2

(Optional) feature table index

cfcFeatureCtrlInstanceNum2

(Optional) instance number

cfcFeatureCtrlName2

(Optional) feature name

cfcFeatureCtrlAction2

(Optional) Action to be triggered for the feature

cfcFeatureCtrlLastAction2

(Optional) Last action triggered for the feature

cfcFeatureCtrlLastActionResult2

(Optional) The result of execution of the last action

cfcFeatureCtrlLastFailureReason2

(Optional) Failure Reason

cfcFeatureCtrlOpStatus2

(Optional) operation status

cfcFeatureCtrlOpStatusReason2

(Optional) Reason for current operation status

cfcFeatureCtrlTag2

(Optional) Name of the instance in string format in case of multinstance feature

Command Mode

  • /exec

show fex interface priority-flow-control

show fex { <fexnum> interface | interface [ <if_list> ] } priority-flow-control [ detail ] [ __readonly__ [ TABLE_pfc_interface <if_name_str> <admin> <oper> [ <oper_vl_bmap> ] [ <cos-list> ] <rx-stats> <tx-stats> [ <rx_ppp_cos_0> ] [ <rx_ppp_cos_1> ] [ <rx_ppp_cos_2> ] [ <rx_ppp_cos_3> ] [ <rx_ppp_cos_4> ] [ <rx_ppp_cos_5> ] [ <rx_ppp_cos_6> ] [ <rx_ppp_cos_7> ] [ <tx_ppp_cos_0> ] [ <tx_ppp_cos_1> ] [ <tx_ppp_cos_2> ] [ <tx_ppp_cos_3> ] [ <tx_ppp_cos_4> ] [ <tx_ppp_cos_5> ] [ <tx_ppp_cos_6> ] [ <tx_ppp_cos_7> ] ] ]

Syntax Description

show

commands to display

fex

Show FEX information

fexnum

FEX number

interface

Interface for displaying PFC information

if_list

(Optional) List of interfaces

priority-flow-control

Show interface PFC information

detail

(Optional) Show detailed per priority Tx/Rx PFC statistics

__readonly__

(Optional)

if_name_str

(Optional) interface name

TABLE_pfc_interface

(Optional) PFC information of an interface

admin

(Optional) PFC admin

oper

(Optional) PFC oper

oper_vl_bmap

(Optional) VL bitmap value

cos-list

(Optional) List of class-of-service values

Command Mode

  • /exec

show fhrp

show fhrp [ <intf> ] [ __readonly__ { TABLE_brief <intf_name> <intf_state> <ipv4_state> <ipv6_state> <hardware_status> <refcount> } ]

Syntax Description

fhrp

FHRP Show commands

show

Show running system information

intf

(Optional) Specify a single interface

__readonly__

(Optional)

TABLE_brief

(Optional) Show brief FHRP interface information

intf_name

(Optional) Interface name

intf_state

(Optional) Interface state

ipv4_state

(Optional) Interface IPv4 state

ipv6_state

(Optional) Interface IPv6 state

hardware_status

(Optional) Interface hardware status

refcount

(Optional) Interface refcount

Command Mode

  • /exec

show fhrp verbose

show fhrp [ <intf> ] verbose [ __readonly__ { TABLE_det <intf_name> <handle> <refcount> { TABLE_clients <client_id> <client_name> } <running> <expired> <v_retries> <v_time> <r_delay> <min_delay> <remaining_delay> <i_state> <ipv4_state> <ipv6_state> <h_state> <int_l2> } ]

Syntax Description

fhrp

FHRP Show commands

show

Show running system information

intf

(Optional) Specify a single interface

verbose

Display detailed information

__readonly__

(Optional)

TABLE_det

(Optional) Detailed FHRP interface information

intf_name

(Optional) Interface name

handle

(Optional) Interface handle

refcount

(Optional) Reference count

TABLE_clients

(Optional) FHRP clients present on interface

client_id

(Optional) FHRP client id

client_name

(Optional) FHRP client name

running

(Optional) Time verify up timer running

expired

(Optional) Verify up timer has expired

v_retries

(Optional) Verify retries

v_time

(Optional) Verify remaining time

r_delay

(Optional) Reload delay

min_delay

(Optional) Min delay

remaining_delay

(Optional) Remaining delay

i_state

(Optional) Interface state

ipv4_state

(Optional) Interface IPv4 state

ipv6_state

(Optional) Interface IPv6 state

h_state

(Optional) Interface hardware state

int_l2

(Optional) Interface is L2-only

Command Mode

  • /exec

show file

show file <uri0> [ cksum | md5sum | sha256sum | sha512sum ] [ __readonly__ { [ <file_content> ] + [ <file_content_cksum> ] [ <file_content_md5sum> ] [ <file_content_sha256sum> ] [ <file_content_sha512sum> ] } ]

Syntax Description

show

Show running system information

file

Displays content of files

uri0

Filename to be displayed

cksum

(Optional) Displays CRC checksum for a file

md5sum

(Optional) Displays MD5 checksum for a file

sha256sum

(Optional) Displays SHA256 checksum for a file

sha512sum

(Optional) Displays SHA512 checksum for a file

__readonly__

(Optional) Read only

file_content

(Optional) uri file content buffer string

file_content_cksum

(Optional) uri file content checksum

file_content_md5sum

(Optional) uri file content md5sum

file_content_sha256sum

(Optional) uri file content sha256sum

file_content_sha512sum

(Optional) uri file content sha512sum

Command Mode

  • /exec

show fips status

show fips status [ __readonly__ { operation_status <o_status> } { mode_state <m_state> } [ TABLE_sessions <lc_num> <lc_status> ] ]

Syntax Description

show

Show running system information

fips

Show if FIPS mode is enabled or disabled

status

Whether FIPS mode is enabled or disabled

__readonly__

(Optional)

operation_status

(Optional) run-time information about fips

o_status

(Optional) operational status of fips

mode_state

(Optional) mode state

m_state

(Optional) fips or non-fips state

TABLE_sessions

(Optional) all lc status

lc_num

(Optional) the lc number

lc_status

(Optional) the lc status

Command Mode

  • /exec

show flogi auto-area-list

show flogi auto-area-list

Syntax Description

show

Show running system information

flogi

Show information about FLOGI

auto-area-list

Show list of ouis that are allocated area.

Command Mode

  • /exec

show flogi database

show flogi database [ { details | [ fcid <fcid0> ] [ details ] | [ interface <if0> ] [ details ] | [ vsan <i1> ] [ details ] } ]

Syntax Description

show

Show running system information

flogi

Show information about FLOGI

database

Show information about FLOGI sessions

details

(Optional) details: shows fcid allocation details

fcid

(Optional) fcid: enter the fcid to be matched

fcid0

(Optional) Enter fcid

details

(Optional) details: shows fcid allocation details

interface

(Optional) interface id: enter the interface id of the port

if0

(Optional) Enter interface id

details

(Optional) details: shows fcid allocation details

vsan

(Optional) vsan id:Enter the vsan number

i1

(Optional) Enter vsan

details

(Optional) details: shows fcid allocation details

Command Mode

  • /exec

show flow cache

show flow cache [ ipv4 | ipv6 | ce ] [ __readonly__ TABLE_flow_cache <flow-type> <source-ip> <destination-ip> <bridge-domain-id> <source-port> <destination-port> <protocol> <ipv6-flowlabel> <byte-count> <packet-count> <tcp-flags> <tos> <if-id> <flow-start> <flow-end> <source-mac> <destination-mac> <ether-type> ]

Syntax Description

show

Show running system information

flow

Show NetFlow information

cache

Show NetFlow Exporter Cache

ipv4

(Optional) Show ipv4 cache entries

ipv6

(Optional) Show ipv6 cache entries

ce

(Optional) Show ce cache entries

__readonly__

(Optional)

TABLE_flow_cache

(Optional) The XML flow cache table

flow-type

(Optional) Flow type - v4,v6 or MAC

source-ip

(Optional) Source IP

destination-ip

(Optional) Destination IP

bridge-domain-id

(Optional) Bridge Domain ID

source-port

(Optional) Source Port

destination-port

(Optional) Destination Port

protocol

(Optional) Protocol

ipv6-flowlabel

(Optional) Ipv6 flowlabel

byte-count

(Optional) Byte Count

packet-count

(Optional) Packet Count

tcp-flags

(Optional) TCP Flags

tos

(Optional) TOS

if-id

(Optional) IF ID

flow-start

(Optional) Flow Start Time

flow-end

(Optional) Flow End Time

source-mac

(Optional) Source MAC

destination-mac

(Optional) Destination MAC

ether-type

(Optional) Ether Type

Command Mode

  • /exec

show flow cache

show flow cache [ ipv4 | ipv6 | ce ] [ __readonly__ [ { TABLE_flow_cache <flow-cache-index> [ <flow-type> ] [ <source-ip> ] [ <destination-ip> ] [ <source-mac> ] [ <destination-mac> ] [ <bridge-domain-id> ] [ <ether-type> ] [ <source-port> ] [ <destination-port> ] [ <protocol> ] [ <ipv6-flowlabel> ] [ <byte-count> ] [ <packet-count> ] [ <tcp-flags> ] [ <tos> ] [ <if-id> ] [ <output-if-id> ] [ <flow-start> ] [ <flow-end> ] [ <profile> ] } ] ]

Syntax Description

show

Show running system information

flow

Show NetFlow information

cache

Show NetFlow Exporter Cache

ipv4

(Optional) Show ipv4 cache entries

ipv6

(Optional) Show ipv6 cache entries

ce

(Optional) Show ce cache entries

__readonly__

(Optional)

TABLE_flow_cache

(Optional) The XML flow cache table

flow-cache-index

(Optional) Flow Index

flow-type

(Optional) Flow type - v4,v6 or MAC

source-ip

(Optional) Source IP

destination-ip

(Optional) Destination IP

source-mac

(Optional) Source MAC

destination-mac

(Optional) Destination MAC

bridge-domain-id

(Optional) Bridge Domain ID

ether-type

(Optional) Ether Type

source-port

(Optional) Source Port

destination-port

(Optional) Destination Port

protocol

(Optional) Protocol

ipv6-flowlabel

(Optional) Ipv6 flowlabel

byte-count

(Optional) Byte Count

packet-count

(Optional) Packet Count

tcp-flags

(Optional) TCP Flags

tos

(Optional) TOS

if-id

(Optional) IF ID

output-if-id

(Optional) OUTPUT IF ID

flow-start

(Optional) Flow Start Time

flow-end

(Optional) Flow End Time

profile

(Optional) Profile

Command Mode

  • /exec

show flow event

show flow event [ name ] [ { <eventname> } ] [ __readonly__ [ { TABLE_nfm_event <event> [ <description> ] <use_count> [ { TABLE_nfm_group <events> [ <buffer_drops> ] [ <fwd_drops> ] [ <acl_drops> ] [ <flow_count> ] [ <latency_threshold> ] [ <latency_unit> ] [ <latency_flow_count> ] [ <rcv_window_zero> ] [ <ip_df> ] [ <tos_value> ] [ <ttl_value> ] [ <max_burst_value> ] } ] } ] ]

Syntax Description

show

Show running system information

flow

Show Analytics information

event

Show Event Configuration

name

(Optional) Show the configuration for a specific Event

eventname

(Optional) Specify a event

__readonly__

(Optional)

TABLE_nfm_event

(Optional) Event Table

event

(Optional) Analytics event

description

(Optional) Description of Analytics event

use_count

(Optional) Use count of Analytics event

TABLE_nfm_group

(Optional)

events

(Optional) Drop or Latency type of events

buffer_drops

(Optional) Capture buffer-drops

fwd_drops

(Optional) Capture fwd-drops

acl_drops

(Optional) Capture acl-drops

flow_count

(Optional) Drop type flow count

latency_threshold

(Optional) Latency threshold value

latency_unit

(Optional) Unit for latency threshold measurement

latency_flow_count

(Optional) Latency type flow count

rcv_window_zero

(Optional) Capture Receive Window Zero events

ip_df

(Optional) Capture IpDf events

tos_value

(Optional) Type of Service value

ttl_value

(Optional) Time To Live value

max_burst_value

(Optional) Max Burst value

Command Mode

  • /exec

show flow exporter

show flow exporter [ name ] [ <exporter> ] [ __readonly__ { TABLE_flow_exporter <exporter> [ <description> ] [ <dest_intf> ] [ <dest> ] [ <vrf> ] [ <vrf_id> ] [ <vrf_resolved> ] [ <dest_udp> ] [ <events_dest_udp> ] [ <source_intf> ] [ <source_ip> ] [ <dscp> ] [ <exp_vers> ] [ <seqnum> ] [ <samp_table_to> ] [ <if_table_to> ] [ <stats_to> ] [ <temp_to> ] [ <rec_sent> ] [ <temp_sent> ] [ <pkts_sent> ] [ <bytes_sent> ] [ <dest_unreach> ] [ <buff_events> ] [ <pkts_drop_no_route> ] [ <pkts_drop_other> ] [ <pkts_drop_lc_rp> ] [ <pkts_drop_op_drops> ] [ <time_last_cleared> ] } ]

Syntax Description

show

Show running system information

flow

Show NetFlow information

exporter

Show NetFlow Exporter Configuration and Statistics

name

(Optional) Show a specific Flow Exporter

exporter

(Optional) Specify an exporter

__readonly__

(Optional)

TABLE_flow_exporter

(Optional)

exporter

(Optional)

description

(Optional)

dest_intf

(Optional)

dest

(Optional)

vrf

(Optional)

vrf_id

(Optional)

vrf_resolved

(Optional)

dest_udp

(Optional)

events_dest_udp

(Optional)

source_intf

(Optional)

source_ip

(Optional)

dscp

(Optional)

seqnum

(Optional)

exp_vers

(Optional)

samp_table_to

(Optional)

if_table_to

(Optional)

stats_to

(Optional)

temp_to

(Optional)

rec_sent

(Optional)

temp_sent

(Optional)

pkts_sent

(Optional)

bytes_sent

(Optional)

dest_unreach

(Optional)

buff_events

(Optional)

pkts_drop_no_route

(Optional)

pkts_drop_other

(Optional)

pkts_drop_lc_rp

(Optional)

pkts_drop_op_drops

(Optional)

time_last_cleared

(Optional)

Command Mode

  • /exec

show flow filter

show flow filter [ __readonly__ [ { TABLE_flow_filter <name> <ipv4acl> <ipv6acl> } ] ]

Syntax Description

show

Show running system information

flow

Show Analytics information

filter

Show filter Configuration

__readonly__

(Optional)

TABLE_flow_filter

(Optional) flow filter data

name

(Optional) Filter Name

ipv4acl

(Optional) IPv4 ACL

ipv6acl

(Optional) IPv4 ACL

Command Mode

  • /exec

show flow interface

show flow { interface [ <intf> ] | vlan [ <vlan> ] } [ __readonly__ [ { TABLE_flow_interface [ <intf_name> ] [ <vlan_id> ] [ <filter> ] [ <v4in_mon_name> ] [ <v4in_direction> ] [ <v4in_profile_id> ] [ <v6in_mon_name> ] [ <v6in_direction> ] [ <v6in_profile_id> ] [ <l2in_mon_name> ] [ <l2in_direction> ] [ <l2in_profile_id> ] } ] ]

Syntax Description

show

Show running system information

flow

Show NetFlow information

interface

Flow interface information

intf

(Optional) Interface

vlan

Flow vlan information

vlan

(Optional) Vlan number

__readonly__

(Optional)

TABLE_flow_interface

(Optional) flow interface data

intf_name

(Optional) Interface

vlan_id

(Optional) VLAN ID

filter

(Optional) Filter name

v4in_mon_name

(Optional) IPv4 Input monitor name

v4in_direction

(Optional) IPv4 Input direction

v4in_profile_id

(Optional) IPv4 Input profile id

v6in_mon_name

(Optional) IPv6 Input monitor name

v6in_direction

(Optional) IPv6 Input direction

v6in_profile_id

(Optional) IPv6 Input profile id

l2in_mon_name

(Optional) l2 Input monitor name

l2in_direction

(Optional) l2 Input direction

l2in_profile_id

(Optional) l2 Input profile id

Command Mode

  • /exec

show flow monitor

show flow monitor [ name ] [ <monitor> [ cache [ detailed ] ] ] [ __readonly__ [ { TABLE_flow_monitor <monitor> [ <description> ] <use_count> [ <record> ] [ <bucket_id> ] [ <exporter1> ] [ <exporter2> ] [ <src_addr> ] [ <dest_addr> ] [ <direction> ] [ <pkt_count> ] [ <byte_count> ] } ] ]

Syntax Description

show

Show running system information

flow

Show NetFlow information

monitor

Show Monitor Configuration

name

(Optional) Show a specific Flow Monitor

monitor

(Optional) Specify a monitor

cache

(Optional) Flow monitor cache contents

detailed

(Optional) Show the entire cache contents

__readonly__

(Optional)

TABLE_flow_monitor

(Optional)

monitor

(Optional)

use_count

(Optional)

description

(Optional)

record

(Optional)

exporter1

(Optional)

exporter2

(Optional)

bucket_id

(Optional)

src_addr

(Optional)

dest_addr

(Optional)

direction

(Optional)

pkt_count

(Optional)

byte_count

(Optional)

Command Mode

  • /exec

show flow profile

show flow profile [ <profile> ] [ __readonly__ [ { TABLE_flow_profile <name> [ <desc> ] <number-of-users> <export-intvl> <source-port> <packet-id-shift> <burst-intvl-shift> <mtu> [ <guess-threshold-lo> ] [ <guess-threshold-hi> ] [ { TABLE_payload_bin <payload-bin-num> <payload-bin-lo> <payload-bin-hi> } ] [ { TABLE_tcpopthdr_bin <tcpopthdr-bin-num> <tcpopthdr-bin-lo> <tcpopthdr-bin-hi> } ] [ { TABLE_rcvwinsize_bin <rcvwinsize-bin-num> <rcvwinsize-bin-lo> <rcvwinsize-bin-hi> } ] } ] ]

Syntax Description

show

Show running system information

flow

Show Analytics information

profile

Show profile Configuration

profile

(Optional) Specify a profile

__readonly__

(Optional)

TABLE_flow_profile

(Optional) HW flow profile

name

(Optional) HW profile name

desc

(Optional) Description of HW profile

number-of-users

(Optional) No. of users

export-intvl

(Optional) Export Interval

source-port

(Optional) Source Port

packet-id-shift

(Optional) IP Packet ID Shift

burst-intvl-shift

(Optional) Burst Interval Shift

mtu

(Optional) MTU

guess-threshold-lo

(Optional) Sequence Number Guess Threshold Lo

guess-threshold-hi

(Optional) Sequence Number Guess Threshold Hi

TABLE_payload_bin

(Optional) Payload Bin

payload-bin-num

(Optional) Bin Number

payload-bin-lo

(Optional) Bin Lo

payload-bin-hi

(Optional) Bin Hi

TABLE_tcpopthdr_bin

(Optional) TCP Opt Hdr Bin

tcpopthdr-bin-num

(Optional) Bin Number

tcpopthdr-bin-lo

(Optional) Bin Lo

tcpopthdr-bin-hi

(Optional) Bin Hi

TABLE_rcvwinsize_bin

(Optional) Receive Windows Size Bin

rcvwinsize-bin-num

(Optional) Bin Number

rcvwinsize-bin-lo

(Optional) Bin Lo

rcvwinsize-bin-hi

(Optional) Bin Hi

Command Mode

  • /exec

show flow record

show flow record [ name ] [ { <record> } | { netflow-original } | { netflow { protocol-port | layer2-switched { input } | { ipv4 | ipv6 | l2 } { original-input } } } ] [ __readonly__ [ { TABLE_flow_record <record> [ <description> ] <use_count> <template> [ <match_ip_src> ] [ <match_ip_dst> ] [ <match_proto> ] [ <match_tos> ] [ <match_l4_src> ] [ <match_l4_dst> ] [ <match_ingress> ] [ <match_egress> ] [ <match_src_as_peer> ] [ <match_dst_as_peer> ] [ <match_ipv6_src> ] [ <match_ipv6_dst> ] [ <match_ipv6_flow> ] [ <match_ipv6_option> ] [ <match_ipv6_traffic> ] [ <match_l2_src> ] [ <match_l2_dst> ] [ <match_l2_src_vlan> ] [ <match_l2_dst_vlan> ] [ <match_l2_1q> ] [ <match_l2_cos> ] [ <match_l2_etype> ] [ <match_flow_dir_match> ] [ <match_ipv4v6_src> ] [ <match_ipv4v6_dst> ] [ <collect_src_as> ] [ <collect_dst_as> ] [ <collect_src_as_peer> ] [ <collect_dst_as_peer> ] [ <collect_fwd_status> ] [ <collect_ipv4_next_hop> ] [ <collect_ipv4_bgp_next> ] [ <collect_ipv6_next_hop> ] [ <collect_ipv6_bgp_next> ] [ <collect_tcp_flags> ] [ <collect_flow_dir> ] [ <collect_bytes> ] [ <collect_bytes_long> ] [ <collect_packets> ] [ <collect_packets_long> ] [ <collect_time_first> ] [ <collect_time_last> ] [ <collect_ingress_coll> ] [ <collect_egress_coll> ] [ <collect_sampler_id> ] [ <collect_ip_ver> ] [ <collect_packet_disp> ] } ] ]

Syntax Description

show

Show running system information

flow

Show NetFlow information

record

Show Record Configuration

name

(Optional) Show the configuration for a specific Flow Record

record

(Optional) Specify a record

netflow-original

(Optional) Traditional IPv4 input NetFlow with origin ASs

netflow

(Optional) Traditional NetFlow collection schemes

ipv4

(Optional) IPv4 collection schemes

ipv6

(Optional) IPv6 collection schemes

l2

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

layer2-switched

(Optional) Layer2-Switched collection schemes

original-input

(Optional) Input NetFlow

input

(Optional) Input NetFlow

protocol-port

(Optional) Protocol and Ports aggregation scheme

__readonly__

(Optional)

TABLE_flow_record

(Optional) flow record data

record

(Optional)

description

(Optional)

use_count

(Optional)

template

(Optional)

match_ip_src

(Optional)

match_ip_dst

(Optional)

match_proto

(Optional)

match_tos

(Optional)

match_l4_src

(Optional)

match_l4_dst

(Optional)

match_ingress

(Optional)

match_egress

(Optional)

match_src_as_peer

(Optional)

match_dst_as_peer

(Optional)

match_ipv6_src

(Optional)

match_ipv6_dst

(Optional)

match_ipv6_flow

(Optional)

match_ipv6_option

(Optional)

match_ipv6_traffic

(Optional)

match_l2_src

(Optional)

match_l2_dst

(Optional)

match_l2_src_vlan

(Optional)

match_l2_dst_vlan

(Optional)

match_l2_1q

(Optional)

match_l2_cos

(Optional)

match_l2_etype

(Optional)

match_flow_dir_match

(Optional)

match_ipv4v6_src

(Optional)

match_ipv4v6_dst

(Optional)

collect_src_as

(Optional)

collect_dst_as

(Optional)

collect_src_as_peer

(Optional)

collect_dst_as_peer

(Optional)

collect_fwd_status

(Optional)

collect_ipv4_next_hop

(Optional)

collect_ipv4_bgp_next

(Optional)

collect_ipv6_next_hop

(Optional)

collect_ipv6_bgp_next

(Optional)

collect_tcp_flags

(Optional)

collect_flow_dir

(Optional)

collect_bytes

(Optional)

collect_bytes_long

(Optional)

collect_packets

(Optional)

collect_packets_long

(Optional)

collect_time_first

(Optional)

collect_time_last

(Optional)

collect_ingress_coll

(Optional)

collect_egress_coll

(Optional)

collect_sampler_id

(Optional)

collect_ip_ver

(Optional)

collect_packet_disp

(Optional)

Command Mode

  • /exec

show flow rtp

show flow rtp { errors { active | history } | details } [ ipv4 | ipv6 ] [ __readonly__ [ <flow-timeout> ] [ { TABLE_flow_rtp <flow-rtp-index> [ <flow-type> ] [ <source-ip> ] [ <destination-ip> ] [ <bridge-domain-id> ] [ <source-port> ] [ <destination-port> ] [ <protocol> ] [ <packet-count> ] [ <bytes-per-sec> ] [ <bits-per-sec> ] [ <start-time> ] [ <if-name> ] [ <vrf-name> ] [ { TABLE_flow_rtp_errors <loss-start> [ <loss-end> ] [ <packet-loss> ] } ] } ] ]

Syntax Description

show

Show running system information

flow

Show NetFlow information

rtp

Real-time Transport Protocol

errors

Show NetFlow RTP flows error information

active

Show RTP flows with active losses

history

Show RTP flows with loss history

details

Show NetFlow RTP detailed information

ipv4

(Optional) Show ipv4 RTP entries

ipv6

(Optional) Show ipv6 RTP entries

__readonly__

(Optional)

TABLE_flow_rtp

(Optional) The XML flow rtp table

flow-timeout

(Optional) Flow Timeout

flow-rtp-index

(Optional) Flow RTP Index

flow-type

(Optional) Flow type - v4,v6

source-ip

(Optional) Source IP

destination-ip

(Optional) Destination IP

bridge-domain-id

(Optional) Bridge Domain ID

source-port

(Optional) Source Port

destination-port

(Optional) Destination Port

protocol

(Optional) Protocol

packet-count

(Optional) Packet Count

bytes-per-sec

(Optional) Bytes Per Second

bits-per-sec

(Optional) Bits Per Second

start-time

(Optional) Flow Start Time

if-name

(Optional) IF/Vlan

vrf-name

(Optional) VRF

TABLE_flow_rtp_errors

(Optional) The XML flow rtp errors table

loss-start

(Optional) Loss Start Time

loss-end

(Optional) Loss End Time

packet-loss

(Optional) Packet loss

Command Mode

  • /exec

show flow rtp timeout

show flow rtp timeout [ __readonly__ { <flush_cache_to> } ]

Syntax Description

show