N Show Commands

show nat itd

show nat itd [ __readonly__ [ { TABLE_NAT_ITD_configurations [ <nat_itd_acl_name> ] [ <nat_itd_globalip> ] [ <nat_itd_globalport> ] [ <nat_itd_localip> ] [ <nat_itd_localport> ] [ <nat_itd_proto> ] [ <nat_itd_acl_type> ] [ <nat_itd_ingress_vrf> ] [ <nat_itd_egress_vrf> ] } ] ]

Syntax Description

show

Show running system information

nat

IP NAT information

itd

IP NAT ITD

__readonly__

(Optional)

TABLE_NAT_ITD_configurations

(Optional) NAT ITD Configurations

nat_itd_acl_name

(Optional) NAT ITD ACL name

nat_itd_globalip

(Optional) NAT ITD Global Ip address

nat_itd_globalport

(Optional) NAT ITD Global port

nat_itd_localip

(Optional) NAT ITD Local Ip address

nat_itd_localport

(Optional) NAT ITD Local port

nat_itd_proto

(Optional) NAT ITD protocol

nat_itd_acl_type

(Optional) NAT ITD Acl type

nat_itd_ingress_vrf

(Optional) NAT ITD Ingress VRF

nat_itd_egress_vrf

(Optional) NAT ITD Egress VRF

Command Mode

  • /exec

show nbm defaults

show nbm defaults [ vrf { <vrf-name> | <nbm-vrf-known-name> | all } ] [ __readonly__ TABLE_vrf <vrfName> { <contextId> <bandwidthInKbps> <dscp> <qid> <policer> <operModeCache> <operMode> <unicastFabricBandwidth> <ResBwRxOnly> <numAsmGroup> } [ TABLE_ASM <groupId> { <groupPrefix> <groupMaskLen> } ] { <senderPolicy> <localReceiverPolicy> <externalReceiverPolicy> } ]

Syntax Description

show

Show running system information

nbm

Non Blocking Multicast

defaults

Default config

vrf

(Optional) Display per-VRF information

all

(Optional) Display all VRFs

vrf-name

(Optional) VRF name

nbm-vrf-known-name

(Optional) NBM VRF Name

__readonly__

(Optional)

TABLE_vrf

(Optional) VRF table

vrfName

(Optional) VRF name

contextId

(Optional) Context ID

bandwidthInKbps

(Optional) Bandwidth in Kbps

dscp

(Optional) DSCP

qid

(Optional) Queue ID

policer

(Optional) Policer

operModeCache

(Optional) Operation Mode Cache

operMode

(Optional) Operation Mode

unicastFabricBandwidth

(Optional) Unicast fabric bandwidth

ResBwRxOnly

(Optional) Reserve Bandwidth Receiver Only

numAsmGroup

(Optional) Number of ASM Groups

TABLE_ASM

(Optional) ASM Group Table

groupId

(Optional) Group number

groupPrefix

(Optional) Group Prefix

groupMaskLen

(Optional) Group Mask Length

senderPolicy

(Optional) Sender Policy

localReceiverPolicy

(Optional) Local Receiver Policy

externalReceiverPolicy

(Optional) External Receiver Policy (PIM)

Command Mode

  • /exec

show nbm flow-policy

show nbm flow-policy [ name { <policy-name> } ] [ vrf { <vrf-name> | <nbm-vrf-known-name> | all } ] [ __readonly__ TABLE_vrf { <vrfName> [ <policyName> ] [ { <defaultBandwidthKbps> <defaultDscp> <defaultQos> <defaultPolicer> } ] [ { TABLE_flow_policy <groupRange> <bandwidthKbps> <dscp> <qos> <policer> <priority> <policyName> } ] <numGroupRanges> <numPolicies> } ]

Syntax Description

show

Show running system information

nbm

Non Blocking Multicast

flow-policy

Flow policy show command

name

(Optional) Policy name

policy-name

(Optional) Policy name value

vrf

(Optional) Display per-VRF information

all

(Optional) Display all VRFs

vrf-name

(Optional) VRF name

nbm-vrf-known-name

(Optional) NBM VRF Name

__readonly__

(Optional)

TABLE_vrf

(Optional) VRF table

vrfName

(Optional) VRF name

policyName

(Optional) Policy name

defaultBandwidthKbps

(Optional) Default Bandwidth in Kbps

defaultDscp

(Optional) Default DSCP

defaultQos

(Optional) Default QOS

defaultPolicer

(Optional) Default Policer

TABLE_flow_policy

(Optional) Flow policies in VRF

groupRange

(Optional) Group range

bandwidthKbps

(Optional) Bandwidth in Kbps

dscp

(Optional) DSCP

qos

(Optional) QOS

policer

(Optional) Policer

priority

(Optional) Priority

policyName

(Optional) Policy Name

numGroupRanges

(Optional) Number of group or group-range

numPolicies

(Optional) Number of flow policies

Command Mode

  • /exec

show nbm flows

show nbm flows [ group-based [ group <group-ip> ] | { flow-policy { <cfg-pol-name> | <unknown-pol-name> } } | source <source-ip> [ group <group-ip> ] | group <group-ip> [ source <source-ip> ] | interface <if-name> | priority { low | critical } | logical-id { none | any | <lid-val> } | profile-id <prof-id> ] [ all | active | inactive | no-receiver ] [ detail ] [ vrf { <vrf-name> | <nbm-vrf-known-name> | all } ] [ __readonly__ [ TABLE_vrf <vrf-name> [ TABLE_flows { <mcast_grp> <src_ip> [ <start_time> ] <uptime> <src_intf> <src_nbr_device> [ <lid> <profile> <status> ] <num_rx> <bw_mbps> [ <cfg_mbps> ] <src_slot> <src_unit> <src_slice> } [ { <act_slot> <act_unit> <stdby_slot> <stdby_unit> } ] { <dscp> <qos> [ <owner_type> ] <policed> [ <is_fhr> ] <priority> <pol_name> } [ <flag> ] [ TABLE_num_int_links { <n_link> <num_links> } ] [ TABLE_int_links { <iiod> <ilink> <i_ifidx> <fab_iiod> <fab_oiod> <fab_ifidx> <oiod> <olink> <i_ieth_port> <fab_ieth_port> } ] [ TABLE_oifs { [ <oif_num> ] <oif_slot> <oif_unit> <oif_slot_unit_num_rx> <oif_if_idx> <oif_iod> <oif_name> <oif_nbr_device> } ] [ { <end_timestr> <flow_rate_bps> <packets> <bytes> } ] ] ] ]

Syntax Description

show

Show running system information

nbm

Non Blocking Multicast

flows

NBM flows (default will be active flows)

active

(Optional) Active flows (default)

inactive

(Optional) Inactive flows

no-receiver

(Optional) Flows without any receiver

all

(Optional) Both active and inactive flows

group-based

(Optional) Multicast group based (*,G) flows to IGMP receivers

flow-policy

(Optional) Flow policy

cfg-pol-name

(Optional) Policy name

unknown-pol-name

(Optional) Policy name

source

(Optional) Source IP address

source-ip

(Optional) Source IP address

group

(Optional) Multicast group

group-ip

(Optional) Multicast group address

interface

(Optional) Ingress interface

priority

(Optional) Flow Priority

low

(Optional) low

critical

(Optional) critical

logical-id

(Optional) Logical ID (LID)

lid-val

(Optional) Logical ID (LID) value

any

(Optional) Any Logical ID (LID)

none

(Optional) Without any Logical ID (LID)

profile-id

(Optional) Profile ID

prof-id

(Optional) Profile ID value

detail

(Optional) Detailed output

if-name

(Optional) Interface name

__readonly__

(Optional)

TABLE_vrf

(Optional) VRF table

vrf-name

(Optional) VRF name

TABLE_flows

(Optional) Flow table

mcast_grp

(Optional) Multicast group IP

src_ip

(Optional) Source IP

start_time

(Optional) Start time for the flow

uptime

(Optional) Uptime for the flow

src_intf

(Optional) Ingress source interface

src_nbr_device

(Optional) Ingress neighbor device name

lid

(Optional) Logical internal flow ID

profile

(Optional) Profile ID

status

(Optional) Flow status

num_rx

(Optional) Number of receivers (OIFs)

bw_mbps

(Optional) Set bandwidth

cfg_mbps

(Optional) Configured bandwidth

src_slot

(Optional) Source (RPF) slot

src_unit

(Optional) Source (RPF) unit

src_slice

(Optional) Source (RPF) slice

dscp

(Optional) Flow DSCP

qos

(Optional) Flow QOS group

owner_type

(Optional) Flow Owner type

policed

(Optional) Flow is policed or not

is_fhr

(Optional) This node is FHR (First-Hop Router) for the Flow

priority

(Optional) Priority

pol_name

(Optional) Flow Policy name

vrf

(Optional) Display per-VRF information

all

(Optional) Display all VRFs

vrf-name

(Optional) VRF name

nbm-vrf-known-name

(Optional) NBM VRF Name

act_slot

(Optional) Active FM Slot

act_unit

(Optional) Active FM Unit

stdby_slot

(Optional) Standby FM Slot

stdby_unit

(Optional) Standby FM Unit

flag

(Optional) Flow not guarantee flag

TABLE_num_int_links

(Optional) Internal link number table

n_link

(Optional) N Link

num_links

(Optional) Number of Links

TABLE_int_links

(Optional) Internal link table

iiod

(Optional) IIOD

ilink

(Optional) Ilink

i_ifidx

(Optional) Internal IF IDX

fab_iiod

(Optional) Fabric IIOD

fab_oiod

(Optional) Fabric OIOD

fab_ifidx

(Optional) Fabric IFIDX

oiod

(Optional) OIOD

olink

(Optional) OLink

i_ieth_port

(Optional) Internal IEth Link

fab_ieth_port

(Optional) Fabric IEth Port

TABLE_oifs

(Optional) OIF table

oif_num

(Optional) Receiver serial number

oif_slot

(Optional) Slot

oif_unit

(Optional) Unit

oif_slot_unit_num_rx

(Optional) Number of Receivers for slot/unit

oif_if_idx

(Optional) Receiver interface index

oif_iod

(Optional) Outgoing IOD

oif_name

(Optional) Outgoing interface name

oif_nbr_device

(Optional) Outgoing neighbor device name

end_timestr

(Optional) Deleted flow end time

flow_rate_bps

(Optional) Deleted flow flow rate in bps

packets

(Optional) Deleted flow packets

bytes

(Optional) Deleted flow bytes

Command Mode

  • /exec

show nbm flows pending-stitch

show nbm flows pending-stitch [ vrf { <vrf-name> | <nbm-vrf-known-name> | all } ] [ __readonly__ [ TABLE_vrf <vrf-name> [ TABLE_pending_stitch_flows { <src_ip> <grp> <ctx_name> <mrib_del> <star_g> <pending_type> <pending_type_str> } ] <num_entries> ] ]

Syntax Description

show

Show running system information

nbm

Non Blocking Multicast

flows

NBM flows

pending-stitch

All pending stitch flows

__readonly__

(Optional)

TABLE_vrf

(Optional) VRF TABLE

vrf-name

(Optional) VRF name

vrf

(Optional) Display per-VRF information

all

(Optional) Display all VRFs

vrf-name

(Optional) VRF name

nbm-vrf-known-name

(Optional) NBM VRF Name

TABLE_pending_stitch_flows

(Optional) Pending stitch flows

src_ip

(Optional) Source IP

grp

(Optional) Group IP

ctx_name

(Optional) Context name

mrib_del

(Optional) Deleted from MRIB

star_g

(Optional) Star g flow

pending_type

(Optional) pending type for flow

pending_type_str

(Optional) pending type for flow string

num_entries

(Optional) Number of entries

Command Mode

  • /exec

show nbm flows static

show nbm flows static [ group <grp> ] [ source <src> ] [ stitched | unstitched ] [ vrf { <vrf-name> | <nbm-vrf-known-name> | all } ] [ __readonly__ { [ TABLE_vrf <vrf-name> [ TABLE_stitched { <stitchedSrc> <stitchedGrp> [ TABLE_stitchedEgress { <stitchedEgressIntf> } ] [ TABLE_stitchedHost { <stitchedHostIp> } ] } ] [ TABLE_unstitched { <unstitchedSrc> <unstitchedGrp> [ TABLE_unstitchedEgress { <unstitchedEgressIntf> } ] [ TABLE_unstitchedHost { <unstitchedHostIp> } ] } ] [ TABLE_Provisioned_Static_Flows { [ <staticApiSrc> ] [ <staticApiGrp> ] } [ <iifName> ] [ <bwkbps> ] [ <policer> ] [ <iifProgStatus> ] [ TABLE_OIF { [ <isLhr> ] [ <oifName> ] [ <oifProgStatus> ] } ] ] ] } ]

Syntax Description

show

Show running system information

nbm

Non Blocking Multicast

flows

NBM flows (default will be active flows)

static

Static NBM Flows

group

(Optional) Multicast group

grp

(Optional) Multicast group address

source

(Optional) Source ip of sender

src

(Optional) Source address

stitched

(Optional) Show only successfully provisioned oif

unstitched

(Optional) Show only failed to provision oif

vrf

(Optional) Display per-VRF information

all

(Optional) Display all VRFs

vrf-name

(Optional) VRF name

nbm-vrf-known-name

(Optional) NBM VRF Name

__readonly__

(Optional)

TABLE_vrf

(Optional) VRF table

vrf-name

(Optional) VRF name

TABLE_stitched

(Optional) Static Flows stitched table

stitchedSrc

(Optional) Source IP address stitched

stitchedGrp

(Optional) Multicast Group address stitched

TABLE_stitchedEgress

(Optional) Egress Intferace table stitched flows

stitchedEgressIntf

(Optional) Egress Interface for stitched flows

TABLE_stitchedHost

(Optional) Host IP table for stitched flows

stitchedHostIp

(Optional) Host IP address for stitched flows

TABLE_unstitched

(Optional) Static Flows unstitched

unstitchedSrc

(Optional) Source IP address unstitched

unstitchedGrp

(Optional) Multicast Group address unstitched

TABLE_unstitchedEgress

(Optional) Egress Intferace table unstitched flows

unstitchedEgressIntf

(Optional) Egress Interface for unstitched flows

TABLE_unstitchedHost

(Optional) Host IP table for unstitched flows

unstitchedHostIp

(Optional) Host IP address for unstitched flows

TABLE_Provisioned_Static_Flows

(Optional) Provisioned Static Flows

staticApiSrc

(Optional) Source IP address for Pim Passive

staticApiGrp

(Optional) Multicast Group address for Pim Passive

iifName

(Optional) Ingress Interface name

bwkbps

(Optional) BW in Kbps

policer

(Optional) Policer

iifProgStatus

(Optional) Ingress Interface Prog Status

TABLE_OIF

(Optional) Egress Interface table for Pim Passive flows

isLhr

(Optional) Is LHR

oifName

(Optional) Egress Interface Name

oifProgStatus

(Optional) OIF Interface Prog Status

Command Mode

  • /exec

show nbm flows statistics

show nbm flows statistics [ group-based [ group <group-ip> ] | source <source-ip> [ group <group-ip> ] | group <group-ip> [ source <source-ip> ] | { flow-policy { <cfg-pol-name> | <unknown-pol-name> } } | interface <if-name> | logical-id { none | any | <lid-val> } | profile-id <prof-id> ] [ vrf { <vrf-name> | <nbm-vrf-known-name> | all } ] [ __readonly__ { [ TABLE_vrf <vrf-name> [ TABLE_stats { <mcast_grp> <src_ip> [ <start_time> ] <uptime> <src_intf> <packets> <bytes> <allow_bytes> <drop_bytes> } ] ] } ]

Syntax Description

show

Show running system information

nbm

Non Blocking Multicast

flows

NBM flows

statistics

Flow statistics

group-based

(Optional) Multicast group based (*,G) flows to IGMP receivers

source

(Optional) Source IP address

source-ip

(Optional) Source IP address value

group

(Optional) Multicast group

group-ip

(Optional) Multicast group address value

flow-policy

(Optional) Flow policy

cfg-pol-name

(Optional) Policy name

unknown-pol-name

(Optional) Policy name

interface

(Optional) Ingress interface

if-name

(Optional) Interface interface name

logical-id

(Optional) Logical ID (LID)

lid-val

(Optional) Logical ID (LID) value

any

(Optional) Any Logical ID (LID)

none

(Optional) Without any Logical ID (LID)

profile-id

(Optional) Profile ID

prof-id

(Optional) Profile ID value

vrf

(Optional) Display per-VRF information

all

(Optional) Display all VRFs

vrf-name

(Optional) VRF name

nbm-vrf-known-name

(Optional) NBM VRF Name

__readonly__

(Optional)

TABLE_vrf

(Optional) VRF table

vrf-name

(Optional) VRF name

TABLE_stats

(Optional) Flow stats table

mcast_grp

(Optional) Multicast group IP

src_ip

(Optional) Source IP

start_time

(Optional) Start time for the flow

uptime

(Optional) Uptime for the flow

src_intf

(Optional) Ingress source interface

packets

(Optional) Packets

bytes

(Optional) Bytes

allow_bytes

(Optional) Allowed bytes

drop_bytes

(Optional) Droped bytes

Command Mode

  • /exec

show nbm flows summary

show nbm flows summary [ vrf { <vrf-name> | <nbm-vrf-known-name> | all } ] [ __readonly__ [ TABLE_vrf <vrf-name> [ TABLE_flows_summary <flow_type> <starg> <sg> <total> ] [ TABLE_flows_summary_per_rpf <if-name> <starg> <sg> <total> ] ] ]

Syntax Description

show

Show running system information

nbm

Non Blocking Multicast

flows

NBM Flows

summary

NBM Flow Summary

vrf

(Optional) Display per-VRF information

all

(Optional) Display all VRFs

vrf-name

(Optional) VRF name

nbm-vrf-known-name

(Optional) NBM VRF Name

__readonly__

(Optional)

TABLE_vrf

(Optional) VRF table

vrf-name

(Optional) VRF name

TABLE_flows_summary

(Optional) Flow summary table

flow_type

(Optional) Type of Flow Summary

sg

(Optional) (S,G) number of flows

starg

(Optional) (*,G) number of flows

total

(Optional) Total Flows

TABLE_flows_summary_per_rpf

(Optional) Flow summary table per RPF

if-name

(Optional) RPF Interface name

sg

(Optional) (S,G) number of flows

starg

(Optional) (*,G) number of flows

total

(Optional) Total Flows

Command Mode

  • /exec

show nbm host-policy all

show nbm host-policy all { sender | { receiver { local | external } } } [ vrf { <vrf-name> | <nbm-vrf-known-name> | all } ] [ __readonly__ [ TABLE_vrf <vrf-name> <policyType> <defaultHostPolicy> [ TABLE_host_policies <seqNum> <source> <group> <groupMask> [ <host> ] <permission> ] <numPolicies> ] ]

Syntax Description

show

Show running system information

nbm

Non Blocking Multicast

host-policy

Host policy

all

All policies on switch

sender

Sender Policy

receiver

Receiver Policy

local

Local receiver policy

external

External receiver policy

vrf

(Optional) Display per-VRF information

all

(Optional) Display all VRFs

vrf-name

(Optional) VRF name

nbm-vrf-known-name

(Optional) NBM VRF Name

__readonly__

(Optional)

TABLE_vrf

(Optional) VRF table

vrf-name

(Optional) VRF name

policyType

(Optional) Type of Policy

defaultHostPolicy

(Optional) Default Permission for Host Policy

TABLE_host_policies

(Optional) Host policy table

seqNum

(Optional) Sequence number

source

(Optional) Source IP

group

(Optional) Multicast group IP

groupMask

(Optional) Group mask length

host

(Optional) Reporter or Host IP

permission

(Optional) Permission for this Policy

numPolicies

(Optional) Number of Policies

Command Mode

  • /exec

show nbm host-policy applied receiver

show nbm host-policy applied receiver { { { local { all | wildcard } | external } [ vrf { <vrf-name> | <nbm-vrf-known-name> | all } ] } | { local interface <if-name> } } [ __readonly__ [ TABLE_vrf <vrf-name> <policyType> <defaultHostPolicy> [ TABLE_interface <ifName> [ TABLE_host_policies <seqNum> <source> <group> <groupMask> <permission> <denyCounter> ] ] [ TABLE_wildcard_policies <seqNumWildcard> <sourceWildcard> <groupWildcard> <groupMaskWildcard> <permissionWildcard> <denyCounterWildcard> ] <numPolicies> ] ]

Syntax Description

show

Show running system information

nbm

Non Blocking Multicast

host-policy

Host policy

applied

Applied policies only

receiver

Receiver Policy

local

Local receiver policy

all

All policies on switch

wildcard

All wildcard policies

external

External receiver policy

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

nbm-vrf-known-name

(Optional) NBM VRF Name

all

(Optional) Display all VRFs

interface

Interface

if-name

Interface name

__readonly__

(Optional)

TABLE_vrf

(Optional) VRF table

vrf-name

(Optional) VRF name

policyType

(Optional) Type of Policy

defaultHostPolicy

(Optional) Default Permission for Host Policy

TABLE_interface

(Optional) Interface table

ifName

(Optional) Interface name

TABLE_host_policies

(Optional) Host policy table

seqNum

(Optional) Sequence number

source

(Optional) Source IP

group

(Optional) Multicast group IP

groupMask

(Optional) Group mask length

permission

(Optional) Permission for this Policy

denyCounter

(Optional) Deny Counter

TABLE_wildcard_policies

(Optional) Wildcard policy table

seqNumWildcard

(Optional) Sequence number

sourceWildcard

(Optional) Source IP

groupWildcard

(Optional) Multicast group IP

groupMaskWildcard

(Optional) Group mask length

permissionWildcard

(Optional) Permission for this Policy

denyCounterWildcard

(Optional) Deny Counter

numPolicies

(Optional) Number of Policies

Command Mode

  • /exec

show nbm host-policy applied sender

show nbm host-policy applied sender { { { all | wildcard } [ vrf { <vrf-name> | <nbm-vrf-known-name> | all } ] } | { interface <if-name> } } [ __readonly__ [ TABLE_vrf <vrf-name> <policyType> <defaultHostPolicy> [ TABLE_interface <ifName> [ TABLE_host_policies <seqNum> <source> <group> <groupMask> <permission> ] ] [ TABLE_wildcard_policies <seqNumWildcard> <sourceWildcard> <groupWildcard> <groupMaskWildcard> <permissionWildcard> ] <numPolicies> ] ]

Syntax Description

show

Show running system information

nbm

Non Blocking Multicast

host-policy

Host policy

applied

Applied policies only

sender

Sender Policy

all

All policies on switch

wildcard

Wildcard host policy

vrf

(Optional) Display per-VRF information

all

(Optional) Display all VRFs

vrf-name

(Optional) VRF name

nbm-vrf-known-name

(Optional) NBM VRF Name

interface

Interface

if-name

Interface name

__readonly__

(Optional)

TABLE_vrf

(Optional) VRF table

vrf-name

(Optional) VRF name

policyType

(Optional) Type of Policy

defaultHostPolicy

(Optional) Default Permission for Host Policy

TABLE_interface

(Optional) Interface table

ifName

(Optional) Interface name

TABLE_host_policies

(Optional) Host policy table

seqNum

(Optional) Sequence number

source

(Optional) Source IP

group

(Optional) Multicast group IP

groupMask

(Optional) Group mask length

permission

(Optional) Permission for this Policy

TABLE_wildcard_policies

(Optional) Wildcard policy table

seqNumWildcard

(Optional) Sequence number

sourceWildcard

(Optional) Source IP

groupWildcard

(Optional) Multicast group IP

groupMaskWildcard

(Optional) Group mask length

permissionWildcard

(Optional) Permission for this Policy

numPolicies

(Optional) Number of Policies

Command Mode

  • /exec

show nbm info shm table flow-detail vrf

show nbm info shm table flow-detail vrf { <vrf-name> | <nbm-vrf-known-name> | all } [ oif <oif-name> ] [ __readonly__ [ TABLE_vrf <vrf-name> [ TABLE_flows { <index> <mcast_grp> <src_ip> <iif> <bw_mbps> <ignore_intf> <ignore_intf_iod> <num_oif> <policer_pending> <policer> } [ TABLE_oifs { <oif-name> <owner> <nat-count> } ] ] ] ]

Syntax Description

show

Show running system information

nbm

Non Blocking Multicast

info

info

shm

Shared memory related commands

table

SHM table type

flow-detail

Flow mapping table in detail

oif

(Optional) Outgoing interface

oif-name

(Optional) flow-detail Physical or Logical interface

vrf

Display per-VRF information

all

Display all VRFs

vrf-name

VRF name

nbm-vrf-known-name

NBM VRF Name

__readonly__

(Optional)

TABLE_vrf

(Optional) VRF table

vrf-name

(Optional) VRF name

TABLE_flows

(Optional) Flow table

mcast_grp

(Optional) Multicast group IP

src_ip

(Optional) Source IP

index

(Optional) index

iif

(Optional) Incoming interface

bw_mbps

(Optional) Bandwidth

ignore_intf

(Optional) ignore interface

ignore_intf_iod

(Optional) ignore interface iod

num_oif

(Optional) number of OIF

policer_pending

(Optional) pending policer

policer

(Optional) Policer disabled or enabled

TABLE_oifs

(Optional) OIF table

oif-name

(Optional) OIF name

owner

(Optional) OIF Owner

nat-count

(Optional) NAT count

Command Mode

  • /exec

show nbm interface bandwidth

show nbm interface { bandwidth | bandwidth-utilized } [ interface <if-name> ] [ vrf { <vrf-name> | <nbm-vrf-known-name> | all } ] [ __readonly__ [ TABLE_bw { <index> <ifname> <iod> <slot> <unit> <slice> <configured_unicast_percentage> <ingr_fl_bw_available> <ingr_fl_bw_usable> <ingr_fl_bw_capacity> <applied_ingr_unicast_mbps> <applied_ingr_unicast_rsvd_percent> <egr_fl_bw_available> <egr_fl_bw_usable> <egr_fl_bw_capacity> <applied_egr_unicast_mbps> <applied_egr_unicast_rsvd_percent> <nbr_dev_id> <nbr_dev_name> <external> } ] ]

Syntax Description

show

Show running system information

nbm

Non Blocking Multicast

interface

interface

bandwidth

Bandwidth interface table

bandwidth-utilized

Utilized Bandwidth interface table

vrf

(Optional) Display per-VRF information

all

(Optional) Display all VRFs

interface

(Optional) Interface

if-name

(Optional) Physical or Logical interface

vrf-name

(Optional) VRF name

nbm-vrf-known-name

(Optional) NBM VRF Name

__readonly__

(Optional)

TABLE_bw

(Optional) TABLE Bandwidth

index

(Optional) Index

ifname

(Optional) Interface

iod

(Optional) IOD

slot

(Optional) SLOT

unit

(Optional) UNIT

slice

(Optional) SLICE

configured_unicast_percentage

(Optional) Link Configured Unicast Percentage

ingr_fl_bw_available

(Optional) Ingress Link BW available in MBPS

ingr_fl_bw_usable

(Optional) Ingress Link BW usable in MBPS

ingr_fl_bw_capacity

(Optional) Ingress Link BW capacity in MBPS

applied_ingr_unicast_mbps

(Optional) Applied ingresss Unicast bandwidth alloted in MBPS

applied_ingr_unicast_rsvd_percent

(Optional) Applied ingresss Unicast bandwidth reserved percent

egr_fl_bw_available

(Optional) Egress Link BW available in MBPS

egr_fl_bw_usable

(Optional) Egress Link BW usable in MBPS

egr_fl_bw_capacity

(Optional) Egress Link BW capacity in MBPS

applied_egr_unicast_mbps

(Optional) Applied egress Unicast bandwidth alloted in MBPS

applied_egr_unicast_rsvd_percent

(Optional) Applied egresss Unicast bandwidth reserved percent

nbr_dev_id

(Optional) Neighbor device ID

nbr_dev_name

(Optional) Neighbor device name

external

(Optional) External

Command Mode

  • /exec

show ngoam interface statistics

show ngoam interface statistics [ __readonly__ [ TABLE_stats { <interface-name> <tx> <rx> } <statistics-end> ] ]

Syntax Description

TABLE_stats

(Optional) interface statistics table

interface-name

(Optional) interface namestring

tx

(Optional) ngoam probe transmit on the interface

rx

(Optional) ngoam probe receive on the interface

show

Show running system information

ngoam

ngoam

interface

probe packet interface

statistics

ngoam probe interface statistics

__readonly__

(Optional) Read Only

statistics-end

(Optional) statistics table end marker

Command Mode

  • /exec

show ngoam loop-detection status

show ngoam loop-detection status [ vlan <vlan-range> [ port <port-range> ] ] [ history ] [ __readonly__ <top-line> [ TABLE_loopdetection_status { <vlanId> <portId> <state> <numLoops> <loopDetectedTime> <loopClearedTime> } ] ]

Syntax Description

show

Show running system information

ngoam

Configure ngoam

loop-detection

Configure sld

status

show blocked/recovering state loops

vlan

(Optional) ngoam loop-detection vlan

port

(Optional) ngoam loop-detection port

history

(Optional) show history of loops detected

vlan-range

(Optional) vlan range max span 1024, Example: 2000-3000,400,500

port-range

(Optional) Interface for loop detection

__readonly__

(Optional) Read Only

TABLE_loopdetection_status

(Optional) Loop detection status table

vlanId

(Optional) Vlan id of loop detected

portId

(Optional) Port name of loop detected

state

(Optional) Port status

loopDetectedTime

(Optional) Loop detection time stamp

loopClearedTime

(Optional) Loop Cleared time stamp

numLoops

(Optional) Number of times loop deetected for given vlanid and port

top-line

(Optional) Placeholder for printing the status header

Command Mode

  • /exec

show ngoam loop-detection summary

show ngoam loop-detection summary [ __readonly__ [ TABLE_loopdetection_summary { <enable> <periodic_probe_interval> <port_recovery_interval> <numVlans> <numPorts> <numLoops> <numPortsBlocked> <numVlansDisabled> <numPortsDisabled> <totalProbesSent> <totalProbesReceived> <nextProbeTime> <nextRecoveryTime> } ] ]

Syntax Description

show

Show running system information

ngoam

Configure ngoam

loop-detection

Show loop detection

summary

ngoam loop detection summary

__readonly__

(Optional) Read Only

TABLE_loopdetection_summary

(Optional) Loop detection summary table

enable

(Optional) Loop detection enable

periodic_probe_interval

(Optional) Loop detection probe interval

port_recovery_interval

(Optional) Loop detection port recovery time

numVlans

(Optional) Number of vlan Loop detection is active monitoring

numPorts

(Optional) Number of ports Loop detection is active monitoring

numLoops

(Optional) Number of loops detected

numPortsBlocked

(Optional) Number of ports blocked by the loop detection

numVlansDisabled

(Optional) Number of VLANs,loop detection has disabled

numPortsDisabled

(Optional) Number of ports,loop detection has disabled

totalProbesSent

(Optional) Total number of probes sent

totalProbesReceived

(Optional) Total number of probes received

nextProbeTime

(Optional) Next probe window start time

nextRecoveryTime

(Optional) Next recovery window start time

Command Mode

  • /exec

show ngoam loopback

show ngoam loopback { { statistics { session { <handle> | all } | summary } } | { status { session { <handle> | all } } } } [ __readonly__ [ TABLE_statistics { <sender-handle> [ <connect-check-id> ] <last-clear-stats> TABLE_stats_attr { <stat-attr> <stat-value> } } ] [ TABLE_status { <st-sender-handle> <type> <state> } ] [ TABLE_statistics_summary { <last-clear-summary-stats> <tx> <rx> <timeout> <unsent> <req-sw-fwd> <req-drop> <resp-tx> <resp-rx> <resp-unsent> <resp-dup> <resp-sw-fwd> <resp-drop> } ] ]

Syntax Description

show

Show running system information

ngoam

ngoam

loopback

ngoam loopback

statistics

ngoam loopback statistics

summary

ngoam loopback statistics summary

status

ngoam loopback status

session

ngoam loopback session

session

ngoam loopback session

handle

ngoam loopback session handle

handle

ngoam loopback session handle

all

Display results for all ping/loopback sessions

all

Display results for all ping/loopback sessions

TABLE_statistics

(Optional) statistics table

sender-handle

(Optional) sender handle

connect-check-id

(Optional) connect check id

last-clear-stats

(Optional) last clear time for statistics

TABLE_stats_attr

(Optional) Stats attributes table

stat-attr

(Optional) stats type

stat-value

(Optional) stats value

TABLE_statistics_summary

(Optional) statistics summary table

last-clear-summary-stats

(Optional) last clear time for summary statistics

tx

(Optional) summary request sent

rx

(Optional) summary reply received

timeout

(Optional) summary timeout

unsent

(Optional) summary unsent

resp-tx

(Optional) summary resp tx

resp-rx

(Optional) summary resp rx

resp-unsent

(Optional) summary resp unsent

resp-dup

(Optional) Duplicate responses received

req-sw-fwd

(Optional) Request pkts sw fwded

resp-sw-fwd

(Optional) Response pkts sw fwded

req-drop

(Optional) Requests dropped

resp-drop

(Optional) Responses dropped

TABLE_status

(Optional) database status table

st-sender-handle

(Optional) sender handle

type

(Optional) ngoam ping type

state

(Optional) ngoam ping state

__readonly__

(Optional) Read Only

Command Mode

  • /exec

show ngoam pathtrace

show ngoam pathtrace { { statistics { summary | { session { <handle> | all } } } } | { database session { <handle> | all } [ detail ] } } [ __readonly__ [ { TABLE_stats <sender-handle> <last-clear-stats> [ TABLE_stats_fields { <stat-attr> <stat-value> } ] } ] [ { TABLE_summary <last-clear-summary-stats> <tx> <rx> <timeout> <unsent> <req-sw-fwd> <req-drop> <resp-tx> <resp-rx> <resp-unsent> <resp-dup> <resp-sw-fwd> <resp-drop> } ] [ { TABLE_database <db-sender-handle> <db-start-time> <db-end-time> <db-last-clear-stats> <db-tx> <db-rx> <db-timeout> <db-unsent> <db-req-sw-fwd> <db-req-drop> <db-resp-tx> <db-resp-rx> <db-resp-unsent> <db-resp-dup> <db-resp-sw-fwd> <db-resp-drop> { TABLE_db_reply <seq-number> <cli-status> [ <reply-ip> ] [ <ingress-if> ] [ <ingress-if-state> ] [ <egress-if> ] [ <egress-if-state> ] [ { TABLE_ifstats <if-name> <rx-len> <rx-bytes> <rx-pkt-rate> <rx-byte-rate> <rx-load> <rx-ucast> <rx-mcast> <rx-bcast> <rx-discards> <rx-errors> <rx-unknown> <rx-bandwidth> <tx-len> <tx-bytes> <tx-pkt-rate> <tx-byte-rate> <tx-load> <tx-ucast> <tx-mcast> <tx-bcast> <tx-discards> <tx-errors> <tx-bandwidth> } ] [ <end-row> ] + } } ] ]

Syntax Description

show

Show running system information

ngoam

ngoam

pathtrace

ngoam pathtrace

statistics

ngoam pathtrace statistics

summary

ngoam pathtrace statistics summary

session

ngoam pathtrace session

handle

ngoam pathtrace session handle

all

Display results for all pathtrace sessions

database

ngoam pathtrace results from the database

session

ngoam pathtrace session

all

Display results for all pathtrace sessions

handle

ngoam pathtrace session handle

detail

(Optional) Show detailed stats if present

__readonly__

(Optional) Read Only

TABLE_stats

(Optional) statistics table

sender-handle

(Optional) sender handle

last-clear-stats

(Optional) last clear time for statistics

TABLE_stats_fields

(Optional) statistics entries

stat-attr

(Optional) stats type

stat-value

(Optional) stats value

TABLE_summary

(Optional) statistics summary table

last-clear-summary-stats

(Optional) last clear time for summary statistics

tx

(Optional) summary request sent

rx

(Optional) summary reply received

timeout

(Optional) summary timeout

unsent

(Optional) summary unsent

req-sw-fwd

(Optional) Request pkts sw fwded

req-drop

(Optional) Requests dropped

resp-tx

(Optional) summary resp tx

resp-rx

(Optional) summary resp rx

resp-unsent

(Optional) summary resp unsent

resp-dup

(Optional) Duplicate responses received

resp-sw-fwd

(Optional) Response pkts sw fwded

resp-drop

(Optional) Responses dropped

TABLE_database

(Optional) pathtrace database

db-sender-handle

(Optional) Sender handle

db-start-time

(Optional) Start time

db-end-time

(Optional) End time

db-last-clear-stats

(Optional) Last clear stats

db-tx

(Optional) Tx packets

db-rx

(Optional) Rx packets

db-timeout

(Optional) Timeout

db-unsent

(Optional) Unsent

db-req-sw-fwd

(Optional) Request pkts sw fwded

db-req-drop

(Optional) Requests dropped

db-resp-tx

(Optional) Response tx

db-resp-rx

(Optional) Response Rx

db-resp-unsent

(Optional) Response unsent

db-resp-dup

(Optional) Duplicate response recvd

db-resp-sw-fwd

(Optional) Response pkts sw fwded

db-resp-drop

(Optional) Responses dropped

TABLE_db_reply

(Optional) Replies

seq-number

(Optional) Sequence number

cli-status

(Optional) ngoam pathtrace status

reply-ip

(Optional) ngoam pathrace reply ip

ingress-if

(Optional) Ingress interface

ingress-if-state

(Optional) Ingress interface state

egress-if

(Optional) Egress interface

egress-if-state

(Optional) Egress interface state

end-row

(Optional) Row end

TABLE_ifstats

(Optional) Interface statistics

if-name

(Optional) Interface name

rx-len

(Optional) Rx Length

rx-bytes

(Optional) Rx Bytes

rx-pkt-rate

(Optional) Rx packet rate

rx-byte-rate

(Optional) Rx byte rate

rx-load

(Optional) Rx load

rx-ucast

(Optional) Rx unicast pkts

rx-mcast

(Optional) Rx mcast pkts

rx-bcast

(Optional) Rx bcast pkts

rx-discards

(Optional) Rx discards

rx-errors

(Optional) Rx errors

rx-unknown

(Optional) Rx unknown

rx-bandwidth

(Optional) Rx bandwidth

tx-len

(Optional) Tx Length

tx-bytes

(Optional) Tx Bytes

tx-pkt-rate

(Optional) Tx packet rate

tx-byte-rate

(Optional) Tx byte rate

tx-load

(Optional) Tx load

tx-ucast

(Optional) Tx unicast pkts

tx-mcast

(Optional) Tx mcast pkts

tx-bcast

(Optional) Tx bcast pkts

tx-discards

(Optional) Tx discards

tx-errors

(Optional) Tx unknown

tx-bandwidth

(Optional) Tx bandwidth

Command Mode

  • /exec

show ngoam probe

show ngoam probe { { statistics { summary | { session { <handle> | all } } } } } [ __readonly__ [ TABLE_stats { <sender-handle> <transaction-id> <dst-vip> <vni> <oam-type> <flow-str> <last-clear-stats> <req-sent> <req-not-sent> } <statistics-end> ] [ TABLE_summary { <last-clear-summary-stats> <tx> <rx> <timeout> <unsent> <resp-tx> <resp-rx> <resp-unsent> } ] ]

Syntax Description

show

Show running system information

ngoam

ngoam

probe

ngoam probe

statistics

ngoam probe statistics

summary

ngoam probe statistics summary

session

ngoam probe session

handle

ngoam probe session handle

all

Display results for all probe sessions

TABLE_stats

(Optional) statistics table

sender-handle

(Optional) sender handle

transaction-id

(Optional) Transaction Identifier

dst-vip

(Optional) Destination Vtep ip address

vni

(Optional) vxlan header vni

oam-type

(Optional) draft pang oam type

flow-str

(Optional) 128 byte flow string.

last-clear-stats

(Optional) last clear time for statistics

req-sent

(Optional) request sent

req-not-sent

(Optional) request not sent or failed

statistics-end

(Optional) statistics table end marker

TABLE_summary

(Optional) statistics summary table

last-clear-summary-stats

(Optional) last clear time for summary statistics

tx

(Optional) summary request sent

rx

(Optional) summary reply received

timeout

(Optional) summary timeout

unsent

(Optional) summary unsent

resp-tx

(Optional) summary resp tx

resp-rx

(Optional) summary resp rx

resp-unsent

(Optional) summary resp unsent

__readonly__

(Optional) Read Only

Command Mode

  • /exec

show ngoam traceroute statistics

show ngoam traceroute statistics { summary | { session { <handle> | all } } } [ __readonly__ [ TABLE_stats { <sender-handle> <last-clear-stats> TABLE_stats_attr { <stat-attr> <stat-value> } } ] [ TABLE_summary { <last-clear-summary-stats> <tx> <rx> <timeout> <unsent> <resp-tx> <resp-rx> <resp-unsent> <resp-dup> } ] ]

Syntax Description

show

Show running system information

ngoam

ngoam

traceroute

ngoam traceroute

statistics

ngoam traceroute statistics

summary

ngoam traceroute statistics summary

session

ngoam traceroute session

handle

ngoam traceroute session handle

all

Display results for all traceroute sessions

TABLE_stats

(Optional) statistics table

sender-handle

(Optional) sender handle

last-clear-stats

(Optional) last clear time for statistics

TABLE_stats_attr

(Optional) Stats attributes table

stat-attr

(Optional) stats type

stat-value

(Optional) stats value

TABLE_summary

(Optional) statistics summary table

last-clear-summary-stats

(Optional) last clear time for summary statistics

tx

(Optional) summary request sent

rx

(Optional) summary reply received

timeout

(Optional) summary timeout

unsent

(Optional) summary unsent

resp-tx

(Optional) summary resp tx

resp-rx

(Optional) summary resp rx

resp-unsent

(Optional) summary resp unsent

resp-dup

(Optional) Duplicate responses received

__readonly__

(Optional) Read Only

Command Mode

  • /exec

show ngoam xconnect session

show ngoam xconnect session { <id> [ iodb ] | all [ dbdump ] } [ __readonly__ [ TABLE_xc_db_summary { [ <legend> ] <vlan-id> <peer-ip> <vni> <db-state> <local-if> <local-if-state> <remote-if> <remote-if-state> [ <end-row> ] + } + ] [ ENTRY_xc_db_detail { <detail> <d-vlan-id> <d-peer-ip> [ <peer-name> ] <d-vni> <d-db-state> <last-state-change-ts> <d-local-if> <d-local-if-state> <vpc-if> <vpc-if-state> <remote-if-detail> <remote-if-detail-state> <remote-vpc-if> <remote-vpc-if-state> [ <d-end-row> ] + } ] ]

Syntax Description

show

Show running system information

ngoam

ngoam information

xconnect

crossconnect info

session

xc session id

id

Vlan-id of the xc

iodb

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

all

show summary info for all sessions

__readonly__

(Optional) Read Only

TABLE_xc_db_summary

(Optional) XC Db table

ENTRY_xc_db_detail

(Optional) XC Db detail

detail

(Optional) Detail or not

vlan-id

(Optional) Vlan id

d-vlan-id

(Optional) Vlan id

vni

(Optional) vni

d-vni

(Optional) vni

local-if

(Optional) Interface

d-local-if

(Optional) Interface

local-if-state

(Optional) Interface state

d-local-if-state

(Optional) Interface state

remote-if

(Optional) Remote interface

remote-if-state

(Optional) Remote interface state

remote-if-detail

(Optional) Remote interface

remote-if-detail-state

(Optional) Remote interface state

vpc-if

(Optional) Interface

vpc-if-state

(Optional) Interface state

remote-vpc-if

(Optional) Remote vpc interface

remote-vpc-if-state

(Optional) Remote vpc interface state

db-state

(Optional) XC state

d-db-state

(Optional) XC state

last-state-change-ts

(Optional) Last state change timestamp

peer-ip

(Optional) Peer ip

d-peer-ip

(Optional) Peer ip

peer-name

(Optional) Peer name

end-row

(Optional) end row

d-end-row

(Optional) end row

legend

(Optional) legend

dbdump

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

Command Mode

  • /exec

show npiv status

show npiv status

Syntax Description

show

Show running system information

npiv

Show information about the npiv feature

status

Show the status of the npiv feature

Command Mode

  • /exec

show npv external-interface-usage

show npv external-interface-usage [ server-interface <if0> ] [ __readonly__ { TABLE_intf_usage <svr_intf> <ext_intf> } ]

Syntax Description

show

Show running system information

npv

Show information about NPV

external-interface-usage

Show external interface usage by server interfaces

server-interface

(Optional) Show external interface usage by a server interface

if0

(Optional)

__readonly__

(Optional) Read Only

TABLE_intf_usage

(Optional) External Interfaces Usage Table

svr_intf

(Optional) Server Interface

ext_intf

(Optional) External Interface

Command Mode

  • /exec

show npv flogi-table

show npv flogi-table [ { interface <if0> | vsan <i0> } ] [ __readonly__ [ [ TABLE_flogi <svr_intf> <vsan_id> <fcid> <pwwn> <ext_intf> <nwwn> ] [ <flogi_count> ] ] ]

Syntax Description

show

Show running system information

npv

Show information about NPV

flogi-table

Show information about FLOGI sessions

interface

(Optional) Show information about FLOGI sessions for a server interface

if0

(Optional)

vsan

(Optional) Show information about FLOGI sessions for a VSAN

i0

(Optional)

__readonly__

(Optional) Read Only

TABLE_flogi

(Optional) FLOGI Table

svr_intf

(Optional) Server Interface

vsan_id

(Optional) VSAN ID

fcid

(Optional) FLOGI FCID

pwwn

(Optional) The PWWN

ext_intf

(Optional) External Interface

nwwn

(Optional) The NWWN

flogi_count

(Optional) Total FLOGI Count

Command Mode

  • /exec

show npv status

show npv status [ vsan <i0> ] [ __readonly__ [ [ <npiv_status> ] [ <load_balance> ] [ { TABLE_extintf <ext_intf> [ <ext_vsan> ] [ <ext_fcid> ] <ext_state> [ { TABLE_vsan <vsan_vsan> <vsan_state> [ <vsan_fcid> ] } ] } ] <ext_intf_count> [ { TABLE_svrintf <svr_intf> <svr_vsan> <svr_state> } ] <svr_intf_count> ] ]

Syntax Description

show

Show running system information

npv

Show information about NPV

status

Show NPV status

vsan

(Optional) Show NPV status for a specific VSAN

i0

(Optional)

__readonly__

(Optional) Read Only

npiv_status

(Optional) NPIV enable/disable status

load_balance

(Optional) disruptive load balance status

TABLE_extintf

(Optional) External Interfaces Table

ext_intf

(Optional) External Interface

ext_vsan

(Optional) External Interface VSAN

ext_fcid

(Optional) External Interface FCID

ext_state

(Optional) External Interface State

TABLE_vsan

(Optional) External Interfaces VSAN Table

vsan_vsan

(Optional) External Interface VSAN

vsan_state

(Optional) VSAN State

vsan_fcid

(Optional) VSAN FCID

ext_intf_count

(Optional) External Interface count

TABLE_svrintf

(Optional) Server Interfaces Table

svr_intf

(Optional) Server Interface

svr_vsan

(Optional) Server Interface VSAN

svr_state

(Optional) Server Interface State

svr_intf_count

(Optional) Server Interface count

Command Mode

  • /exec

show npv traffic-map

show npv traffic-map [ server-interface <if0> ] [ __readonly__ [ { TABLE_traffic_map <svr_intf> <ext_intf> } ] ]

Syntax Description

show

Show running system information

npv

Show information about NPV

traffic-map

Show information about Traffic Map

server-interface

(Optional) Show information about Traffic map for a server interface

if0

(Optional)

__readonly__

(Optional) Read Only

TABLE_traffic_map

(Optional) Traffic Map Table

svr_intf

(Optional) Server Interface

ext_intf

(Optional) External Interface

Command Mode

  • /exec

show ntp access-groups

show ntp access-groups [ __readonly__ [ <matchall> ] [ { TABLE_accessgroups <accesslist> [ <type> ] } ] ]

Syntax Description

show

Show running system information

ntp

Show NTP information

access-groups

Display NTP access groups

__readonly__

(Optional)

matchall

(Optional) matchall

TABLE_accessgroups

(Optional) accessgroups

accesslist

(Optional) accesslist

type

(Optional) type

Command Mode

  • /exec

show ntp authentication-keys

show ntp authentication-keys [ __readonly__ [ { TABLE_authkeys <Authkey> [ <MD5String> ] } ] ]

Syntax Description

show

Show running system information

ntp

Show NTP information

authentication-keys

Display authentication keys

__readonly__

(Optional)

TABLE_authkeys

(Optional) authentication keys

Authkey

(Optional) authentication key

MD5String

(Optional) password

Command Mode

  • /exec

show ntp authentication-status

show ntp authentication-status [ __readonly__ [ <authentication> ] ]

Syntax Description

show

Show running system information

ntp

Show NTP information

authentication-status

NTP Authentication Status

__readonly__

(Optional)

authentication

(Optional) authentication enabled/disabled

Command Mode

  • /exec

show ntp information

show ntp information [ __readonly__ [ <system_type> ] [ <software_version> ] ]

Syntax Description

show

Show running system information

ntp

Show NTP information

information

Show ntp information

__readonly__

(Optional)

system_type

(Optional) Ntp System Type

software_version

(Optional) Ntp Software Version

Command Mode

  • /exec

show ntp logging-status

show ntp logging-status [ __readonly__ [ <loggingstatus> ] ]

Syntax Description

show

Show running system information

ntp

Show NTP information

logging-status

Display NTP logging status

__readonly__

(Optional)

loggingstatus

(Optional) logging enabled/disabled

Command Mode

  • /exec

show ntp peer-status

show ntp peer-status [ __readonly__ [ <totalpeers> ] [ { TABLE_peersstatus <syncmode> <remote> <local> <st> <poll> <reach> <delay> [ <vrf> ] } ] ]

Syntax Description

show

Show running system information

ntp

Show NTP information

peer-status

Show the status for all the server/peers

__readonly__

(Optional)

totalpeers

(Optional) totalpeers

TABLE_peersstatus

(Optional) peersstatus

syncmode

(Optional) peermode

remote

(Optional) remote addr

local

(Optional) local addr

st

(Optional) stratum

poll

(Optional) ntp poll

reach

(Optional) reach

delay

(Optional) delay

vrf

(Optional) vrf name

Command Mode

  • /exec

show ntp peers

show ntp peers [ __readonly__ [ { TABLE_peers <PeerIPAddress> <serv_peer> <conf_flag> } ] ]

Syntax Description

show

Show running system information

ntp

Show NTP information

peers

Show all the peers.

__readonly__

(Optional)

TABLE_peers

(Optional) peers

PeerIPAddress

(Optional) peer Ip addr

serv_peer

(Optional) server or peer

conf_flag

(Optional) configured or dynamic

Command Mode

  • /exec

show ntp rts-update

show ntp rts-update [ __readonly__ [ <rtsupdate> ] ]

Syntax Description

show

Show running system information

ntp

Show NTP information

rts-update

Show if the RTS update is enabled

__readonly__

(Optional)

rtsupdate

(Optional) rts update enabled/disabled

Command Mode

  • /exec

show ntp session status

show ntp session status [ __readonly__ [ <session_status> ] ]

Syntax Description

show

Show running system information

ntp

Show NTP information

session

Show the session information

status

Show the session status

__readonly__

(Optional)

session_status

(Optional) last session status

Command Mode

  • /exec

show ntp source-interface

show ntp source-interface [ __readonly__ [ <sourceinterface> ] ]

Syntax Description

show

Show running system information

ntp

Show NTP information

source-interface

Source interface configured

__readonly__

(Optional)

sourceinterface

(Optional) source interface

Command Mode

  • /exec

show ntp source

show ntp source [ __readonly__ [ { TABLE_sourceip <sourceip> } ] ]

Syntax Description

show

Show running system information

ntp

Show NTP information

source

Source IP address configured

__readonly__

(Optional)

TABLE_sourceip

(Optional) source ip table

sourceip

(Optional) source ip addr

Command Mode

  • /exec

show ntp statistics

show ntp statistics { [ io ] | [ local ] | [ memory ] | peer { ipaddr { <ipv4_0> | <ipv6_1> } | name <s0> } } [ __readonly__ [ { <iotimesincereset> <ioreceivebuffers> <iofreereceivebuffers> <iousedreceivebuffers> <iolowwaterrefills> <iodroppedpackets> <ioignoredpackets> <ioreceivedpackets> <iopacketssent> <iopacketsnotsent> <iointerruptshandled> <ioreceivedbyint> } ] [ { <localsystemuptime> <localtimesincereset> <localoldversionpackets> <localnewversionpackets> <localunknownversionnumber> <localbadpacketformat> <localpacketsprocessed> <localbadauthentication> [ <localpacketsrejected> ] } ] [ { <memtimesincereset> <memtotalpeermemory> <memfreepeermemory> <memcallstofindpeer> <memnewpeerallocations> <mempeerdemobilizations> <memhashtablecounts> } ] [ { <peeripremotehost> <peeriplocalinterface> <peeriptimelastreceived> <peeriptimeuntilnextsend> <peeripreachabilitychange> <peerippacketssent> <peerippacketsreceived> <peeripbadauthentication> <peeripbogusorigin> <peeripduplicate> <peeripbaddispersion> <peeripbadreferencetime> <peeripcandidateorder> } ] [ { <peernameremotehost> <peernamelocalinterface> <peernametimelastreceived> <peernametimeuntilnextsend> <peernamereachabilitychange> <peernamepacketssent> <peernamepacketsreceived> <peernamebadauthentication> <peernamebogusorigin> <peernameduplicate> <peernameduplicate> <peernamebaddispersion> <peernamebadreferencetime> <peernamecandidateorder> } ] ]

Syntax Description

show

Show running system information

ntp

Show NTP information

statistics

Show the NTP statistics

io

(Optional) Show the input-output statistics.

local

(Optional) Show the counters maintained by the local NTP.

memory

(Optional) Show the statistics counters related to memory code.

peer

Show the per-peer statistics counter of a peer.

ipaddr

Peer's IP address

ipv4_0

name

Peer's Name

s0

__readonly__

(Optional)

iotimesincereset

(Optional) time since reset

ioreceivebuffers

(Optional) receive buffers

iofreereceivebuffers

(Optional) free receive buffers

iousedreceivebuffers

(Optional) used receive buffers

iolowwaterrefills

(Optional) low water refills

iodroppedpackets

(Optional) dropped packets

ioignoredpackets

(Optional) ignored packets

ioreceivedpackets

(Optional) received packets

iopacketssent

(Optional) packets sent

iopacketsnotsent

(Optional) packets not sent

iointerruptshandled

(Optional) interrupts handled

ioreceivedbyint

(Optional) received by int

localsystemuptime

(Optional) system up time

localtimesincereset

(Optional) time since reset

localoldversionpackets

(Optional) old version packets

localnewversionpackets

(Optional) new version packets

localunknownversionnumber

(Optional) unknown version number

localbadpacketformat

(Optional) bad packet format

localpacketsprocessed

(Optional) packets processed

localbadauthentication

(Optional) bad authentication

localpacketsrejected

(Optional) packets rejected

memtimesincereset

(Optional) time since reset

memtotalpeermemory

(Optional) total peer memory

memfreepeermemory

(Optional) free peer memory

memcallstofindpeer

(Optional) calls to find peer

memnewpeerallocations

(Optional) new peer allocations

mempeerdemobilizations

(Optional) peer demobilizations

memhashtablecounts

(Optional) hash table counts

peeripremotehost

(Optional) peeripremotehost

peeriplocalinterface

(Optional) peeriplocalinterface

peeriptimelastreceived

(Optional) peeriptimelastreceived

peeriptimeuntilnextsend

(Optional) peeriptimeuntilnextsend

peeripreachabilitychange

(Optional) peeripreachabilitychange

peerippacketssent

(Optional) peerippacketssent

peerippacketsreceived

(Optional) peerippacketsreceived

peeripbadauthentication

(Optional) peeripbadauthentication

peeripbogusorigin

(Optional) peeripbogusorigin

peeripduplicate

(Optional) peeripduplicate

peeripbaddispersion

(Optional) peeripbaddispersion

peeripbadreferencetime

(Optional) peeripbadreferencetime

peeripcandidateorder

(Optional) peeripcandidateorder

peernameremotehost

(Optional) peernameremotehost

peernamelocalinterface

(Optional) peernamelocalinterface

peernametimelastreceived

(Optional) peernametimelastreceived

peernametimeuntilnextsend

(Optional) peernametimeuntilnextsend

peernamereachabilitychange

(Optional) peernamereachabilitychange

peernamepacketssent

(Optional) peernamepacketssent

peernamepacketsreceived

(Optional) peernamepacketsreceived

peernamebadauthentication

(Optional) peernamebadauthentication

peernamebogusorigin

(Optional) peernamebogusorigin

peernameduplicate

(Optional) peernameduplicate

peernamebaddispersion

(Optional) peernamebaddispersion

peernamebadreferencetime

(Optional) peernamebadreferencetime

peernamecandidateorder

(Optional) peernamecandidateorder

Command Mode

  • /exec

show ntp status

show ntp status [ __readonly__ [ <distribution> ] [ <operational_state> ] ]

Syntax Description

show

Show running system information

ntp

Show NTP information

status

Show the NTP distribution status

__readonly__

(Optional)

distribution

(Optional) distribution enabled/disabled

operational_state

(Optional) last operation status

Command Mode

  • /exec

show ntp trusted-keys

show ntp trusted-keys [ __readonly__ [ { TABLE_trustkeys <key> } ] ]

Syntax Description

show

Show running system information

ntp

Show NTP information

trusted-keys

Display trusted keys

__readonly__

(Optional)

TABLE_trustkeys

(Optional) trusted keys

key

(Optional) trusted key

Command Mode

  • /exec

show nve adjacency mpls

show nve adjacency mpls [ __readonly__ TABLE_nve_mpls_adj [ { <peer-ip> | <peer-ipv6> } <evi> <label-sr> <learn-mask> <pending-state> <adj-state> ] ]

Syntax Description

show

Display NVE information

nve

Configure NVE information

adjacency

Downstream Adjacencies

mpls

Segment routing

__readonly__

(Optional)

TABLE_nve_mpls_adj

(Optional) xml schema for sr nve parameters

peer-ip

(Optional) Peer IP address v4

evi

(Optional) EVI value

label-sr

(Optional) SR Label

learn-mask

(Optional) Learn mask for the peer

pending-state

(Optional) Peer adjacency pending state

adj-state

(Optional) Peer adjacency state

Command Mode

  • /exec

show nve bfd neighbors

show nve bfd neighbors [ __readonly__ [ TABLE_nve_bfd_neighbors <if-name> [ { <neighbor-vtep-ip> <neighbor-inner-ip> <neighbor-inner-mac> <neighbor-cc-state> } ] ] ]

Syntax Description

show

Display NVE information

nve

Configure NVE information

bfd

BFD

neighbors

neighbors

__readonly__

(Optional)

TABLE_nve_bfd_neighbors

(Optional) BFD neighbors schema

if-name

(Optional) if-name

neighbor-vtep-ip

(Optional) Remote VTEP IP address

neighbor-inner-ip

(Optional) Remote VTEP Inner IP address

neighbor-inner-mac

(Optional) Remote VTEP Inner MAC address

neighbor-cc-state

(Optional) Remote VTEP vPC consistency check state

Command Mode

  • /exec

show nve core-links

show nve core-links [ __readonly__ [ TABLE_core_link <if-name> [ { <if-state> } ] ] ]

Syntax Description

show

Display NVE information

nve

Configure NVE information

core-links

Core-links

__readonly__

(Optional)

TABLE_core_link

(Optional) xml schema for show nve core-links

if-name

(Optional) core-link interface name

if-state

(Optional) core-link interface oper state

Command Mode

  • /exec

show nve ethernet-segment

show nve ethernet-segment [ summary ] [ { esi <esi-id> } ] [ __readonly__ [ TABLE_es { <esi> <if-name> <es-state> [ { [ <sh-esi> ] <po-state> <nve-if-name> <nve-state> <host-reach-mode> <active-vlans> <df-vlans> <active-vnis> <df-bds> <df-vnis> <cc-failed-vlans> <cc-timer-left> <num-es-mem> <local-ordinal> <df-timer-st> <config-status> <df-list> <es-rt-added> <ead-rt-added> <ead-evi-rt-timer-age> <tag> <type> } ] } ] ]

Syntax Description

show

Display NVE information

nve

Configure NVE information

ethernet-segment

Ethernet-segment

summary

(Optional) Ethernet-segment summary

esi

(Optional) ESI Value

esi-id

(Optional) ESI ID

__readonly__

(Optional)

TABLE_es

(Optional) xml schema for show nve ethernet-segment

esi

(Optional) ESI value

if-name

(Optional) port-channel interface name

es-state

(Optional) Ethernet-segment oper state

po-state

(Optional) port-channel interface oper state

nve-if-name

(Optional) NVE interface name

nve-state

(Optional) NVE oper state

host-reach-mode

(Optional) host reach mode

active-vlans

(Optional) Active vlans on ES

df-vlans

(Optional) DF-vlans on ES

active-vnis

(Optional) Active VNIs on ES

df-bds

(Optional) DF-bds on ES

df-vnis

(Optional) DF-vnis on ES

cc-failed-vlans

(Optional) Vlans for which consistency check failed

cc-timer-left

(Optional) vlan CC timer status

num-es-mem

(Optional) number of es members

local-ordinal

(Optional) local-ordinal

df-timer-st

(Optional) df election start timer

config-status

(Optional) config state

df-list

(Optional) List of router-ips in DF list

es-rt-added

(Optional) ES route added to L2RIB

ead-rt-added

(Optional) EAD routes added to L2RIB

ead-evi-rt-timer-age

(Optional) EAD/EVI route advertisement timer age

sh-esi

(Optional) Split-horizon ESI

tag

(Optional) tag associated with ESI

type

(Optional) ES type

Command Mode

  • /exec

show nve evi

show nve evi [ __readonly__ TABLE_nve_evi [ <evi> <sw-bd> <label-sr> <oper-state> <evi-state> ] ]

Syntax Description

show

Display NVE information

nve

Configure NVE information

evi

Ethernet Virtual Identifier

__readonly__

(Optional)

TABLE_nve_evi

(Optional) xml schema for nve evis

evi

(Optional) EVI value

sw-bd

(Optional) VLAN information

label-sr

(Optional) SR Label

oper-state

(Optional) EVI up or down

evi-state

(Optional) EVI state

Command Mode

  • /exec

show nve interface

show nve interface [ <nve-if> [ detail ] ] [ __readonly__ [ TABLE_nve_if { <if-name> <if-state> <encap-type> <vpc-capability> <local-rmac> <host-reach-mode> <source-if> { <primary-ip> | <primary-ipv6> } [ <secondary-ip> | <secondary-ipv6> ] [ { <anycast-if> } { <anycast-ip> | <anycast-ipv6> } ] [ { <src-if-state> [ <anyc-if-state> ] <adv-vmac> <nve-flags> <nve-if-handle> <src-if-holddown-tm> <src-if-holdup-tm> <src-if-holddown-left> <vpc-compat-check> <vip-rmac> [ <vip-rmac-ro> ] <sm-state> [ <es-delay-restore-time> <es-delay-restore-time-left> ] <fabric-convergence-time> <fabric-convergence-time-left> [ <multisite-convergence-time> <multisite-convergence-time-left> <dci-advertise-pip> ] [ <multisite-bgw-if> <multisite-bgw-if-ip> <multisite-bgw-if-admin-state> <multisite-bgw-if-oper-state> <multisite-bgw-if-oper-state-down-reason> ] } ] } ] ]

Syntax Description

show

Display NVE information

nve

Configure NVE information

interface

Interface

nve-if

(Optional) NVE interface

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_nve_if

(Optional) xml schema for show nve interfaces

if-name

(Optional) interface name

if-state

(Optional) interface oper state

encap-type

(Optional) encap-type

vpc-capability

(Optional) vpc capability

local-rmac

(Optional) local router mac

host-reach-mode

(Optional) host reach mode

source-if

(Optional) source-interface

primary-ip

(Optional) primary-ip

secondary-ip

(Optional) secondary-ip

anycast-if

(Optional) anycast-interface

anycast-ip

(Optional) anycast-ip

src-if-state

(Optional) source-interface state

anyc-if-state

(Optional) anycast-interface state

adv-vmac

(Optional) advertise virtual rmac

nve-flags

(Optional) nve-flags

nve-if-handle

(Optional) interface handle

src-if-holddown-tm

(Optional) hold down time

src-if-holdup-tm

(Optional) hold up time

src-if-holddown-left

(Optional) hold down time left

vpc-compat-check

(Optional) vpc-compat-check

vip-rmac

(Optional) Generated VIP MAC

vip-rmac-ro

(Optional) Generated VIP MAC Re-origination

sm-state

(Optional) sm state

es-delay-restore-time

(Optional) es delay restore time

es-delay-restore-time-left

(Optional) es delay restore time left

fabric-convergence-time

(Optional) fabric convergence time

fabric-convergence-time-left

(Optional) fabric convergence time left

multisite-convergence-time

(Optional) multisite convergence time

multisite-convergence-time-left

(Optional) multisite convergence time left

multisite-bgw-if

(Optional) multisite border gateway interface

multisite-bgw-if-ip

(Optional) multisite if ip

multisite-bgw-if-admin-state

(Optional) multisite if admin state

multisite-bgw-if-oper-state

(Optional) multisite if oper state

multisite-bgw-if-oper-state-down-reason

(Optional) multisite if oper state down reason

dci-advertise-pip

(Optional) dci-advertise-pip

Command Mode

  • /exec

show nve mpls

show nve mpls [ __readonly__ [ TABLE_nve_mpls { <source-if> { <primary-ip> | <primary-ipv6> } { <secondary-ip> | <secondary-ipv6> } <sm-state> [ <down-reason> ] } ] ]

Syntax Description

show

Display NVE information

nve

Configure NVE information

mpls

Segment routing

__readonly__

(Optional)

TABLE_nve_mpls

(Optional) xml schema for sr nve parameters

source-if

(Optional) source-interface

primary-ip

(Optional) primary-ip

secondary-ip

(Optional) secondary-ip

sm-state

(Optional) sm state

down-reason

(Optional) down reason

Command Mode

  • /exec

show nve multisite dci-links

show nve multisite dci-links [ __readonly__ [ TABLE_multisite_dci_link <if-name> [ { <if-state> } ] ] ]

Syntax Description

show

Display NVE information

nve

Configure NVE information

multisite

multisite

dci-links

dci-links

__readonly__

(Optional)

TABLE_multisite_dci_link

(Optional) xml schema for show nve multisite dci-links

if-name

(Optional) dci-link interface name

if-state

(Optional) dci-link interface oper state

Command Mode

  • /exec

show nve multisite fabric-links

show nve multisite fabric-links [ __readonly__ [ TABLE_multisite_fabric_link <if-name> [ { <if-state> } ] ] ]

Syntax Description

show

Display NVE information

nve

Configure NVE information

multisite

multisite

fabric-links

fabric-links

__readonly__

(Optional)

TABLE_multisite_fabric_link

(Optional) xml schema for show nve multisite fabric-links

if-name

(Optional) fabric-link interface name

if-state

(Optional) fabric-link interface oper state

Command Mode

  • /exec

show nve peers

show nve peers [ [ [ interface <nve-if> | peer-ip { <user-peer-ip> | <user-peer-ipv6> } | control-plane | data-plane ] [ detail ] ] | [ control-plane-vni [ vni <vni-id> | peer-ip { <user-peer-ip> | <user-peer-ipv6> } ] ] | [ controller ] ] [ __readonly__ TABLE_nve_peers [ [ <detail> ] [ <control-plane-vni> ] [ <if-name> ] { <peer-ip> | <peer-ipv6> } [ <peer-state> ] [ <learn-type> ] [ <uptime> ] [ <router-mac> ] [ { <first-vni> <create-ts> <config-vnis> <provision-state> <cp-vni> <vni-assignment-mode> <dci-fabric-location> [ <stale-timer> ] } ] [ { <vni> <learn-src> <learn-src-mask> <vni-gw-mac> <peer-type> <egress-vni> <sw-bd> <irb> <state> } ] ] ]

Syntax Description

show

Display NVE information

nve

Configure NVE information

peers

Show peers

interface

(Optional) Interface

nve-if

(Optional) NVE interface

detail

(Optional) Detailed information

peer-ip

(Optional) Show a specific peer

user-peer-ip

(Optional) Remote Peer IP address

control-plane

(Optional) Show peers learned via control plane

data-plane

(Optional) Show peers learned via data plane

control-plane-vni

(Optional) Show details of control plane vnis

vni

(Optional) VNI ID

vni-id

(Optional) Virtual Network Identifier

controller

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

__readonly__

(Optional)

detail

(Optional) detail

control-plane-vni

(Optional) control-plane-vni

TABLE_nve_peers

(Optional) schema peer

if-name

(Optional) if-name

peer-ip

(Optional) peer-ip

peer-state

(Optional) peer-state

learn-type

(Optional) learn-type

uptime

(Optional) uptime

router-mac

(Optional) router-mac

first-vni

(Optional) first-vni

create-ts

(Optional) create-timestamp

config-vnis

(Optional) config-vnis

provision-state

(Optional) provision-state

cp-vni

(Optional) cp-vni

vni-assignment-mode

(Optional) vni assignment mode

dci-fabric-location

(Optional) dci-fabric-location

stale-timer

(Optional) stale-timer

vni

(Optional) vni value

learn-src

(Optional) learn source

learn-src-mask

(Optional) learn source mask

vni-gw-mac

(Optional) vni gateway mac

peer-type

(Optional) peer location wan/fabric

egress-vni

(Optional) egress-vni value

sw-bd

(Optional) SW BD value

irb

(Optional) IRB state

state

(Optional) State machine state

Command Mode

  • /exec

show nve peers interface counters

show nve peers { <addr> | <addr-v6> } interface <nve-if> counters [ __readonly__ { <peer-ip> | <peer-ipv6> } <tx_ucastpkts> <tx_ucastbytes> <tx_mcastpkts> <tx_mcastbytes> <rx_ucastpkts> <rx_ucastbytes> <rx_mcastpkts> <rx_mcastbytes> ]

Syntax Description

show

Display NVE information

nve

Configure NVE information

peers

NVE Peer

addr

Remote Peer IP Address

counters

Counters

interface

Interface

nve-if

NVE interface

__readonly__

(Optional)

peer-ip

(Optional)

tx_ucastpkts

(Optional)

tx_ucastbytes

(Optional)

tx_mcastpkts

(Optional)

tx_mcastbytes

(Optional)

rx_ucastpkts

(Optional)

rx_ucastbytes

(Optional)

rx_mcastpkts

(Optional)

rx_mcastbytes

(Optional)

Command Mode

  • /exec

show nve peers mpls

show nve peers mpls [ peer-ip { <user-peer-ip> | <user-peer-ipv6> } ] [ detail ] [ __readonly__ TABLE_nve_mpls_peers [ [ <detail> ] { <peer-ip> | <peer-ipv6> } [ <peer-state> ] [ <uptime> ] [ <create-ts> ] [ <provision-state> ] ] ]

Syntax Description

show

Display NVE information

nve

Configure NVE information

peers

Show peers

mpls

Segment routing peers

detail

(Optional) Detailed information

peer-ip

(Optional) Show a specific peer

user-peer-ip

(Optional) Remote Peer IP address

__readonly__

(Optional)

detail

(Optional) detail

TABLE_nve_mpls_peers

(Optional) schema peer

peer-ip

(Optional) peer-ip

peer-state

(Optional) peer-state

uptime

(Optional) uptime

create-ts

(Optional) create-timestamp

provision-state

(Optional) provision-state

Command Mode

  • /exec

show nve peers vni interface counters

show nve peers { { <addr> | <addr-v6> } | all } vni { <vni-id> | all } interface <nve-if> counters [ __readonly__ TABLE_nve_peer_vni_counters { <peer-ip> | <peer-ipv6> } <vni> <tx_ucastpkts> <tx_ucastbytes> <tx_mcastpkts> <tx_mcastbytes> <rx_ucastpkts> <rx_ucastbytes> <rx_mcastpkts> <rx_mcastbytes> ]

Syntax Description

show

Display NVE information

nve

Configure NVE information

peers

NVE Peer

addr

Remote Peer IP Address

all

Show counters for all peers/VNIs

vni

Virtual Network Identifier

vni-id

Virtual Network Identifier

counters

Counters

interface

Interface

nve-if

NVE interface

__readonly__

(Optional)

TABLE_nve_peer_vni_counters

(Optional)

peer-ip

(Optional)

vni

(Optional)

tx_ucastpkts

(Optional)

tx_ucastbytes

(Optional)

tx_mcastpkts

(Optional)

tx_mcastbytes

(Optional)

rx_ucastpkts

(Optional)

rx_ucastbytes

(Optional)

rx_mcastpkts

(Optional)

rx_mcastbytes

(Optional)

Command Mode

  • /exec

show nve replication-servers

show nve replication-servers [ __readonly__ [ TABLE_nve_replication_servers <if-name> [ { <server-ip> <server-state> <server-ready> } ] ] ]

Syntax Description

show

Display NVE information

nve

Configure NVE information

replication-servers

replication-servers

__readonly__

(Optional)

TABLE_nve_replication_servers

(Optional) replcation servers schema

if-name

(Optional) if-name

server-ip

(Optional) Server IP address

server-state

(Optional) Server reachability state

server-ready

(Optional) Server ready state

Command Mode

  • /exec

show nve vni

show nve vni [ { { interface <nve-if> | <vni-id> | all } [ detail ] } | control-plane | data-plane | summary | controller ] [ __readonly__ [ TABLE_nve_vni [ [ <detail> ] [ <if-name> <vni> <mcast> <vni-state> <mode> <type> <flags> <dci-mcast> [ { <prvsn-state> <vlan-bd> [ <svi-state> ] [ <vni-intf-state> ] <vpc-compat-check> } ] ] ] [ [ <summary> ] <cp-vni-count> <cp-vni-up> <cp-vni-down> <dp-vni-count> <dp-vni-up> <dp-vni-down> ] ] ]

Syntax Description

show

Display NVE information

nve

Configure NVE information

vni

Virtual Network Identifier

vni-id

(Optional) Virtual Network Identifier

interface

(Optional) Interface

nve-if

(Optional) NVE interface

all

(Optional) Display all VNIs

detail

(Optional) Detailed information

control-plane

(Optional) show vni learned via BGP

data-plane

(Optional) show vni learned via data plane

summary

(Optional) show vni summary

controller

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

__readonly__

(Optional)

TABLE_nve_vni

(Optional) vni schema

detail

(Optional) detail

if-name

(Optional) if-name

vni

(Optional) vni

mcast

(Optional) mcast

vni-state

(Optional) vni-state

mode

(Optional) vni-mode

type

(Optional) vni-type

flags

(Optional) vni-flags

dci-mcast

(Optional) dci-mcast

prvsn-state

(Optional) provision-state

vlan-bd

(Optional) vlan-bd

svi-state

(Optional) svi-state

vni-intf-state

(Optional) vni-intf-state

vpc-compat-check

(Optional) vpc-compat-check

summary

(Optional) summary

cp-vni-count

(Optional) CP vni count

cp-vni-up

(Optional) CP vni up count

cp-vni-down

(Optional) CP vni down count

dp-vni-count

(Optional) DP vni count

dp-vni-up

(Optional) DP vni up count

dp-vni-down

(Optional) DP vni down count

Command Mode

  • /exec

show nve vni counters

show nve vni { <vni-id> | all } counters [ __readonly__ <vni> <tx_ucastpkts> <tx_ucastbytes> <tx_mcastpkts> <tx_mcastbytes> <rx_ucastpkts> <rx_ucastbytes> <rx_mcastpkts> <rx_mcastbytes> ]

Syntax Description

show

Display NVE information

nve

Configure NVE information

vni

Virtual Network Identifier

vni-id

Virtual Network Identifier

all

Show counters for all vnis

counters

Counters

__readonly__

(Optional)

vni

(Optional)

tx_ucastpkts

(Optional)

tx_ucastbytes

(Optional)

tx_mcastpkts

(Optional)

tx_mcastbytes

(Optional)

rx_ucastpkts

(Optional)

rx_ucastbytes

(Optional)

rx_mcastpkts

(Optional)

rx_mcastbytes

(Optional)

Command Mode

  • /exec

show nve vni ingress-replication

show nve vni ingress-replication [ { interface <nve-if> | <vni-id> } ] [ __readonly__ [ TABLE_nve_vni_ingr_repl <if-name> <vni> [ { { <repl-ip> | <repl-ipv6> } <source> <up-time> } ] + ] ]

Syntax Description

show

Display NVE information

nve

Configure NVE information

vni

Virtual Network Identifier

ingress-replication

ingress-replication

vni-id

(Optional) Virtual Network Identifier

interface

(Optional) Interface

nve-if

(Optional) NVE interface

__readonly__

(Optional)

TABLE_nve_vni_ingr_repl

(Optional) vni ingress repl schema

if-name

(Optional) if-name

vni

(Optional) vni

repl-ip

(Optional) Replication List

source

(Optional) Source

up-time

(Optional) Up Time

Command Mode

  • /exec

show nve vni peer-vtep

show nve vni peer-vtep [ { interface <nve-if> | <vni-id> } ] [ __readonly__ [ TABLE_nve_vni_peer_vtep <if-name> <vni> [ { <vtep-ip> <source> <up-time> } ] ] ]

Syntax Description

show

Display NVE information

nve

Configure NVE information

vni

Virtual Network Identifier

peer-vtep

Show static peer-vtep configured per vni

vni-id

(Optional) Virtual Network Identifier

interface

(Optional) Interface

nve-if

(Optional) NVE interface

__readonly__

(Optional)

TABLE_nve_vni_peer_vtep

(Optional) vni peer vtep schema

if-name

(Optional) if-name

vni

(Optional) vni

vtep-ip

(Optional) VTEP List

source

(Optional) Source

up-time

(Optional) Up Time

Command Mode

  • /exec

show nve vrf

show nve vrf [ vrf-name ] [ __readonly__ [ TABLE_nve_vrf <vrf-name> <vni> <if-name> <gateway-mac> [ { <ipv4-tblid> <ipv6-tblid> <vni-sw-bd> <flags> } ] ] ]

Syntax Description

show

Display NVE information

nve

Configure NVE information

vrf

VRF name

vrf-name

(Optional) vrf name

__readonly__

(Optional)

TABLE_nve_vrf

(Optional) vrf schema

vrf-name

(Optional) vrf-name

vni

(Optional) vni

if-name

(Optional) if-name

gateway-mac

(Optional) gateway-mac

ipv4-tblid

(Optional) ipv4-table-id

ipv6-tblid

(Optional) ipv6-table-id

vni-sw-bd

(Optional) vni-sw-bd

flags

(Optional) flags

Command Mode

  • /exec

show nve vxlan-params

show nve vxlan-params [ __readonly__ <vxlan-port> ]

Syntax Description

show

Display NVE information

nve

Configure NVE information

vxlan-params

VxLAN Parameters

__readonly__

(Optional)

vxlan-port

(Optional) vxlan-params

Command Mode

  • /exec

show nxapi-server logs

show nxapi-server logs

Syntax Description

show

Show running system information

nxapi-server

Show NX-API Server

logs

Show NX-API Server logs

Command Mode

  • /exec

show nxapi

show nxapi [ __readonly__ <nxapi_status> <timeout> <cmdtimeout> [ <trustpoint> ] [ configuration_error <c_error> ] [ <http_port> ] [ <https_port> <ssl_issuer> <ssl_enddate> ] ]

Syntax Description

show

Show running system information

nxapi

Show nxapi status

__readonly__

(Optional)

nxapi_status

(Optional) NX-API enabled status

timeout

(Optional) Time in minutes until session expires

cmdtimeout

(Optional) Time in seconds until command times out

trustpoint

(Optional) Trustpoint label name

configuration_error

(Optional) config syntax error

c_error

(Optional) confg syntax error

http_port

(Optional) Configured HTTP port

https_port

(Optional) Configured HTTPS port

ssl_issuer

(Optional) Issuer information for current certificate

ssl_enddate

(Optional) Expiration date of current certificate

Command Mode

  • /exec