Cisco Nexus 9000 Series NX-OS Command Reference (Configuration Commands), Release 10.4(x)

aaa accounting dot1x default group

[no] aaa accounting dot1x default group <grp_name> +

Syntax Description


aaa	Configure aaa functions
accounting	Configure accounting methods
dot1x	accounting methods for dot1x
default	default aaa methods
grp_name	server group name

Command Mode

/exec/configure

aaa authentication dot1x default group

[no] aaa authentication dot1x default group <grp_name> +

Syntax Description


aaa	Configure aaa functions
authentication	Configure authentication methods
grp_name	server group name

Command Mode

/exec/configure

aaa authentication login ascii-authentication

[no] aaa authentication login ascii-authentication

Syntax Description


no	(Optional) Negate a command or set its defaults
aaa	Configure aaa functions
authentication	Configure authentication methods
login	Configure methods for login
ascii-authentication	enable ascii authentication

Command Mode

/exec/configure

aaa authentication login console

[no] aaa authentication login console { group <s0> [ { local1 | none | <s1> [ { local1 | none | <s2> [ { local1 | none | <s3> [ { local1 | none | <s4> [ { local1 | none | <s5> [ { local1 | none | <s6> [ { local1 | none | <s7> [ { local1 | none } ] } ] } ] } ] } ] } ] } ] } ] | local | none }

Syntax Description


no	(Optional) Negate a command or set its defaults
aaa	Configure aaa functions
authentication	Configure authentication methods
login	Configure methods for login
console	Configure console methods
group	Specify server groups
s0	Server group name
none	(Optional) No authentication
s1	(Optional) Server group name
none	(Optional) No authentication
s2	(Optional) Server group name
none	(Optional) No authentication
s3	(Optional) Server group name
none	(Optional) No authentication
s4	(Optional) Server group name
none	(Optional) No authentication
s5	(Optional) Server group name
none	(Optional) No authentication
s6	(Optional) Server group name
none	(Optional) No authentication
s7	(Optional) Server group name
none	(Optional) No authentication
local	Use local username authentication
local1	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED
none	No authentication

Command Mode

/exec/configure

aaa authentication login default

[no] aaa authentication login default { group <s0> [ { local1 | none | <s1> [ { local1 | none | <s2> [ { local1 | none | <s3> [ { local1 | none | <s4> [ { local1 | none | <s5> [ { local1 | none | <s6> [ { local1 | none | <s7> [ { local1 | none } ] } ] } ] } ] } ] } ] } ] } ] | local | none }

Syntax Description


no	(Optional) Negate a command or set its defaults
aaa	Configure aaa functions
authentication	Configure authentication methods
login	Configure methods for login
default	Configure default methods
group	Specify server group and maximum number of server groups supported is 8
s0	Server group name
none	(Optional) No authentication
s1	(Optional) Server group name
none	(Optional) No authentication
s2	(Optional) Server group name
none	(Optional) No authentication
s3	(Optional) Server group name
none	(Optional) No authentication
s4	(Optional) Server group name
none	(Optional) No authentication
s5	(Optional) Server group name
none	(Optional) No authentication
s6	(Optional) Server group name
none	(Optional) No authentication
s7	(Optional) Server group name
none	(Optional) No authentication
local	Use local username authentication
local1	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED
none	No authentication

Command Mode

/exec/configure

aaa authentication login default fallback error local

[no] aaa authentication login { default | console } fallback error local

Syntax Description


no	(Optional) Negate a command or set its defaults
aaa	Configure aaa functions
authentication	Configure authentication methods
login	Configure methods for login
default	Configure default methods
console	Configure console methods
fallback	Configure fallback behavior
error	Fallback in case all AAA servers configured for remote authentication are unreachable (Authentication error)
local	Fallback to local authentication

Command Mode

/exec/configure

aaa authentication login enable

[no] aaa authentication login { mschap | mschapv2 | chap } enable

Syntax Description


no	(Optional) Negate a command or set its defaults
aaa	Configure aaa functions
authentication	Configure authentication methods
login	Configure methods for login
mschap	MSCHAP authentication for login
mschapv2	MSCHAP V2 authentication for login
chap	CHAP authentication for login
enable	enable the authentication for login

Command Mode

/exec/configure

aaa authentication login error-enable

[no] aaa authentication login error-enable

Syntax Description


no	(Optional) Negate a command or set its defaults
aaa	Configure aaa functions
authentication	Configure authentication methods
login	Configure methods for login
error-enable	enable display of error message on login failures

Command Mode

/exec/configure

aaa authentication login invalid-username-log

[no] aaa authentication login invalid-username-log

Syntax Description


no	(Optional) Negate a command or set its defaults
aaa	Configure aaa functions
authentication	Configure authentication methods
login	Configure methods for login
invalid-username-log	enable invalid username log

Command Mode

/exec/configure

aaa authentication rejected

[no] aaa authentication rejected

Syntax Description


no	Negate a command or set its defaults
aaa	Configure aaa functions
authentication	Configure authentication methods
rejected	Set max number of fail attempts

Command Mode

/exec/configure

aaa authentication rejected in ban

aaa authentication rejected <i1> in <i2> ban <i3>

Syntax Description


aaa	Configure aaa functions
authentication	Configure authentication methods
rejected	Set max number of fail attempts
i1	Fail attempts max value
in	Watch period for fail attempts
i2	Time period in seconds
ban	Block time period
i3	Time period in seconds

Command Mode

/exec/configure

aaa authorization commands console

[no] aaa authorization { commands | config-commands } console { group <s0> [ { local | none | <s1> [ { local | none | <s2> [ { local | none | <s3> [ { local | none | <s4> [ { local | none | <s5> [ { local | none | <s6> [ { local | none | <s7> [ { local | none } ] } ] } ] } ] } ] } ] } ] } ] | local | none }

Syntax Description


no	(Optional) Negate a command or set its defaults
aaa	Configure aaa functions
authorization	Configure authorization methods
commands	Authorization for all exec-mode commands
config-commands	Authorization for config commands
console	Configure methods console
group	Specify server groups
s0	Server group name
s1	(Optional) Server group name
s2	(Optional) Server group name
s3	(Optional) Server group name
s4	(Optional) Server group name
s5	(Optional) Server group name
s6	(Optional) Server group name
s7	(Optional) Server group name
local	(Optional) Use local RBACL based authorization
none	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

Command Mode

/exec/configure

aaa authorization commands default

[no] aaa authorization { commands | config-commands } default { group <s0> [ { local | none | <s1> [ { local | none | <s2> [ { local | none | <s3> [ { local | none | <s4> [ { local | none | <s5> [ { local | none | <s6> [ { local | none | <s7> [ { local | none } ] } ] } ] } ] } ] } ] } ] } ] | local | none }

Syntax Description


no	(Optional) Negate a command or set its defaults
aaa	Configure aaa functions
authorization	Configure authorization methods
commands	Authorization for all exec-mode commands
config-commands	Authorization for config commands
default	Configure default methods
group	Specify server groups
s0	Server group name
s1	(Optional) Server group name
s2	(Optional) Server group name
s3	(Optional) Server group name
s4	(Optional) Server group name
s5	(Optional) Server group name
s6	(Optional) Server group name
s7	(Optional) Server group name
local	(Optional) Use local RBACL based authorization
none	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

Command Mode

/exec/configure

aaa authorization ssh default group

[no] aaa authorization { ssh-publickey | ssh-certificate } default { group <s0> [ { local1 | <s1> [ { local1 | <s2> [ { local1 | <s3> [ { local1 | <s4> [ { local1 | <s5> [ { local1 | <s6> [ { local1 | <s7> [ { local1 } ] } ] } ] } ] } ] } ] } ] } ] | local }

Syntax Description


no	(Optional) Negate a command or set its defaults
aaa	Configure aaa functions
authorization	Configure authorization methods
ssh-publickey	Configure ssh publickey
ssh-certificate	Configure ssh certificate
default	Configure default ssh methods
group	Specify server groups
s0	Server group name
s1	(Optional) Server group name
s2	(Optional) Server group name
s3	(Optional) Server group name
s4	(Optional) Server group name
s5	(Optional) Server group name
s6	(Optional) Server group name
s7	(Optional) Server group name
local	Use local username authentication
local1	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

Command Mode

/exec/configure

aaa bypass-user

[no] aaa bypass-user <s0> { [ accounting ] [ authorization ] | [ authorization ] [ accounting ] }

Syntax Description


no	(Optional) Negate a command or set its defaults
aaa	Configure aaa functions
bypass-user	Configure bypass user
s0	Enter the username
accounting	(Optional) Bypass accounting
authorization	(Optional) Bypass authorization

Command Mode

/exec/configure

aaa group server ldap

[no] aaa group server ldap <s0>

Syntax Description


no	(Optional) Negate a command or set its defaults
aaa	Configure aaa functions
group	Configure aaa server group
server	Configure aaa server group
ldap	LDAP server group name
s0	LDAP server group name

Command Mode

/exec/configure

aaa group server radius

[no] aaa group server radius <s0>

Syntax Description


no	(Optional) Negate a command or set its defaults
aaa	Configure aaa functions
group	Configure aaa server group
server	Configure aaa server group
radius	RADIUS server group name
s0	RADIUS server group name

Command Mode

/exec/configure

aaa group server tacacs

[no] aaa group server tacacs <s0>

Syntax Description


no	(Optional) Negate a command or set its defaults
aaa	Configure aaa functions
group	Configure aaa server group
server	Configure aaa server group
tacacs	TACACS+ server group name
s0	TACACS+ server group name

Command Mode

/exec/configure

aaa server radius dynamic-author

[no] aaa server radius dynamic-author

Syntax Description


no	(Optional) Negate a command or set its defaults
aaa	Configure aaa functions
server	Local AAA server
radius	Profile for local radius server
dynamic-author	Local server profile for RFC 5176 support

Command Mode

/exec/configure

aaa user default-role

[no] aaa user default-role

Syntax Description


no	(Optional) Negate a command or set its defaults
aaa	Configure aaa functions
user	Remotely authenticated user
default-role	Default role assigned by aaa-admin for remote authentication

Command Mode

/exec/configure

abort

Syntax Description


abort	abort itd session

Command Mode

/exec/configure/itd-session-device-group

abort

Syntax Description


abort	Exit region configuration mode, aborting changes

Command Mode

/exec/configure/spanning-tree/mst/configuration

abort

abort [ session ]

Syntax Description


abort	Abort the current configuration session
session	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

Command Mode

/exec/configure

abort

Syntax Description


abort	abort epbr session

Command Mode

/exec/configure/epbr-sess

abort

Syntax Description


abort	Abort the current configuration session

Command Mode

/exec/configure

absolute-timeout

{ absolute-timeout <i0> | no absolute-timeout [ <i0> ] }

Syntax Description


no	Negate a command or set its defaults
absolute-timeout	Configure absolute timeout
i0	Enter timeout in minutes, 0 to disable

Command Mode

/exec/configure/line

absolute-timer

{ [ no ] absolute-timer <time> | no absolute-timer }

Syntax Description


absolute-timer	Define a De-Dup absolute timer
time	Time in minutes

Command Mode

/exec/configure/de-duplication

absolute start

{ [ <seqno> ] | no } absolute { start <stime> <sday> <smonth> <syear> [ end <etime> <eday> <emonth> <eyear> ] | end <etime> <eday> <emonth> <eyear> }

Syntax Description


seqno	(Optional) Sequence number
no	Negate a command or set its defaults
absolute	Absolute time and date
start	Starting time and date
stime	Starting time
sday	Day of the month
smonth	Month
syear	Year
end	(Optional) Ending time and date
etime	(Optional) Ending time
eday	(Optional) Day of the month
emonth	(Optional) Month
eyear	(Optional) Year

Command Mode

/exec/configure/timerange

accept-lifetime

{ { accept-lifetime [ local ] <stime> { smonth_a | smonth_b | smonth_c | smonth_d | smonth_e | smonth_f | smonth_g | smonth_h | smonth_i | smonth_j | smonth_k | smonth_l } <sday> <syear> { duration <dsec> | infinite | <etime> { emonth_a | emonth_b | emonth_c | emonth_d | emonth_e | emonth_f | emonth_g | emonth_h | emonth_i | emonth_j | emonth_k | emonth_l } <eday> <eyear> } } | { no accept-lifetime [ [ local ] <stime> { smonth_a | smonth_b | smonth_c | smonth_d | smonth_e | smonth_f | smonth_g | smonth_h | smonth_i | smonth_j | smonth_k | smonth_l } <sday> <syear> { duration <dsec> | infinite | <etime> { emonth_a | emonth_b | emonth_c | emonth_d | emonth_e | emonth_f | emonth_g | emonth_h | emonth_i | emonth_j | emonth_k | emonth_l } <eday> <eyear> } ] } }

Syntax Description


no	Negate a command or set its defaults
accept-lifetime	Set accept lifetime of key
local	(Optional) Specify time in local timezone
stime	HH:MM:SS Time to start <0-23>:<0-59>:<0-59>
etime	HH:MM:SS Time to end <0-23>:<0-59>:<0-59>
smonth_a
smonth_b
smonth_c
smonth_d
smonth_e
smonth_f
smonth_g
smonth_h
smonth_i
smonth_j
smonth_k
smonth_l
emonth_a
emonth_b
emonth_c
emonth_d
emonth_e
emonth_f
emonth_g
emonth_h
emonth_i
emonth_j
emonth_k
emonth_l
sday	Day of the month to start
eday	Day of the month to end
syear	Year to start
eyear	Year to start
duration	Set key lifetime duration
dsec	Duration in seconds
infinite	Never Expires

Command Mode

/exec/configure/keychain-key

access-class

[no] access-class <acl-ip-ipv6-name> <inout>

Syntax Description


no	(Optional) Negate a command or set its defaults
access-class	Specify IPv4 access control for packets
acl-ip-ipv6-name	List name
inout	Traffic direction

Command Mode

/exec/configure/line

access-list

[no] access-list <acl-name> [ device-group <dgrp_name> ]

Syntax Description


no	(Optional) Negate a command or set its defaults
access-list	ITD access-list name
device-group	(Optional) device-group
acl-name	ITD user ACL name
dgrp_name	(Optional) access-list device-group name

Command Mode

/exec/configure/itd

access-list ipv6

[no] access-list ipv6 <acl-name> [ device-group <dgrp_name> ]

Syntax Description


no	(Optional) Negate a command or set its defaults
access-list	ITD access-list name
ipv6	ipv6 access-list
device-group	(Optional) device-group
acl-name	ITD user ACL name
dgrp_name	(Optional) access-list ipv6 device-group name

Command Mode

/exec/configure/itd

action

[no] action { drop [ log ] | forward | redirect <intf> }

Syntax Description


no	(Optional) Negate a command or set its defaults
action	Specify the action clause
drop	Drop matched packets
log	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED
forward	Forward matched packets
redirect	Redirect matched packets to the specified interface(s)
intf	Interface traffic is redirected to

Command Mode

/exec/configure/vacl

action

[no] action <label>

Syntax Description


no	Negate a command or set its defaults
action	Configure the actions to be executed
label	Enter the label <num1>[.<num2>] for action order num2 must be 0-9

Command Mode

/exec/configure/event-manager-applet

action cli

action <label> cli [ local ] <vsh_cmd>

Syntax Description


action	Configure the actions to be executed
label	Enter the label <num1>[.<num2>] for action order num2 must be 0-9
cli	Configure a VSH CLI action
local	(Optional) Execute the action in the same card on which the event happens
vsh_cmd	Enter the vsh command

Command Mode

/exec/configure/event-manager-applet

action collect

action <label> collect { { <yaml_file> [ max-triggers <m_value> | rate-limit <value> | purge-time <p_value> ] + <component> } | disable }

Syntax Description


action	Configure the actions to be executed
label	Enter the label <num1>[.<num2>] for action order num2 must be 0-9
collect	Collect debugging info using a yaml file
yaml_file	Enter the YAML input file or folder inside which yaml files are present. The path/name has to be relative to bootflash:scripts
max-triggers	(Optional) Limit number of triggers
m_value	(Optional) Enter the value in integer
rate-limit	(Optional) Limit trigger based collection for a period of time
value	(Optional) Enter value in seconds
purge-time	(Optional) Change the time period for which older files are purged
p_value	(Optional) Enter purge time value in minutes
component	Enter the component for tech-support collection
disable	Disable the trigger based collection

Command Mode

/exec/configure/event-manager-applet

action counter name value op

action <label> counter name <counter-name> value <counter-value> op <op-val>

Syntax Description


action	Configure the actions to be executed
label	Enter the label <num1>[.<num2>] for action order num2 must be 0-9
counter	Specify the name of the counter
name	Specify the name of the counter
counter-name	Name of the counter
value	Specify the value to be applied to the counter
counter-value	Enter an integer value or a $ prefixed name (parameter substitution)
op	Specify the operator to be applied
op-val	Enter the value of the operator

Command Mode

/exec/configure/event-manager-applet

action eem test

action <label> eem test <param>

Syntax Description


action	Configure the actions to be executed
label	Enter the label <num1>[.<num2>] for action order num2 must be 0-9
eem	Event Manager command
test	Do test action
param	Test action parameter (dummy value)

Command Mode

/exec/configure/event-manager-applet

action event-default

action <label> event-default

Syntax Description


action	Configure the actions to be executed
label	Enter the label <num1>[.<num2>] for action order num2 must be 0-9
event-default	Do default action for the event

Command Mode

/exec/configure/event-manager-applet

action forceshut reset-reason

[no] action <label2> forceshut [ { module { <module> | <mod-str> } | <s0> { <santa-cruz-range> | <santa-cruz-string> } } ] reset-reason <reset_reason_string>

Syntax Description


no	(Optional) Negate a command or set its defaults
action	Configure the actions to be executed
label2	Enter the label <num1>[.<num2>] for action order num2 must be 0-9
forceshut	Force the entire switch to shut down
module	(Optional) Optional. Module to be forced to shut down(optional argument)
module	(Optional) please enter the module number
mod-str	(Optional) Enter the module number (integer value) or a $ prefixed parameter name
s0	(Optional) Optional. Xbar to be forced to shut down(optional argument)
santa-cruz-range	(Optional) please enter the xbar number
santa-cruz-string	(Optional) Enter the xbar number (integer value) or a $ prefixed parameter name
reset-reason	Shut down (with reset-reason)
reset_reason_string	please enter reset_reason_string in quotes

Command Mode

/exec/configure/event-manager-applet

action overbudgetshut

[no] action <label> overbudgetshut [ module { <module> | <mod-str> } ]

Syntax Description


no	(Optional) Negate a command or set its defaults
action	Configure the actions to be executed
label	Enter the label <num1>[.<num2>] for action order num2 must be 0-9
overbudgetshut	Shut down the specified LCs due to power over budget
module	(Optional) Optional. Module to be force-shut(optional arg)
module	(Optional) please enter the module number
mod-str	(Optional) Enter the module number (integer value) or a $ prefixed parameter name

Command Mode

/exec/configure/event-manager-applet

action policy-default

action <label> policy-default

Syntax Description


action	Configure the actions to be executed
label	Enter the label <num1>[.<num2>] for action order num2 must be 0-9
policy-default	Do default action(s) of the policy being overridden

Command Mode

/exec/configure/event-manager-applet

action reload force

[no] action <label> reload [ module { <module> | <mod-str> } ] force

Syntax Description


no	(Optional) Negate a command or set its defaults
action	Configure the actions to be executed
label	Enter the label <num1>[.<num2>] for action order num2 must be 0-9
reload	Reload the system or a specific module
module	(Optional) Reload a specific module
force	reload without prompting
module	(Optional) please enter the module number
mod-str	(Optional) Enter the module number (integer value) or a $ prefixed parameter name

Command Mode

/exec/configure/event-manager-applet

action snmp-trap

action <label> snmp-trap [ intdata1 <integer-data1> ] [ intdata2 <integer-data2> ] [ strdata <string-data> ]

Syntax Description


action	Configure the actions to be executed
label	Enter the label <num1>[.<num2>] for action order num2 must be 0-9
snmp-trap	Send
intdata1	(Optional) Enter
integer-data1	(Optional) Integer
intdata2	(Optional) Enter
integer-data2	(Optional) Integer
strdata	(Optional) Enter
string-data	(Optional) String

Command Mode

/exec/configure/event-manager-applet

action syslog msg

action <label> syslog [ priority { <prio> | <prio-str> } ] msg <msg-text>

Syntax Description


action	Configure the actions to be executed
label	Enter the label <num1>[.<num2>] for action order num2 must be 0-9
syslog	Generate a syslog message
priority	(Optional) Priority of the syslog message
prio	(Optional) Enter the priority
prio-str	(Optional) Enter a valid $ prefixed name, for parameter substitution
msg	Enter the message for the syslog
msg-text	The message text

Command Mode

/exec/configure/event-manager-applet

activate mode-100M

[no] activate mode-100M

Syntax Description


no	(Optional) Negate a command or set its defaults
activate	Activate new mode
mode-100M	Activate mode-100M

Command Mode

/exec/configure

active-query timer

{ active-query timer <interval> | no active-query timer }

Syntax Description


no	Negate a command or set its defaults
active-query	mDNS Active Query on vlan
timer	Active Query Timer value
interval	Active Query Timer value in seconds

Command Mode

/exec/configure/vlan-config/mdns-sd

additional-paths install backup

[no] additional-paths install backup

Syntax Description


no	(Optional) Negate a command or set its defaults
additional-paths	Additional paths configuration
install	Install backup path
backup	Install backup path

Command Mode

/exec/configure/router-bgp/router-bgp-af-ipv6 /exec/configure/router-bgp/router-bgp-vrf-af-ipv6 /exec/configure/router-bgp/router-bgp-af-ipv4 /exec/configure/router-bgp/router-bgp-vrf-af-ipv4

additional-paths receive

[no] additional-paths receive

Syntax Description


no	(Optional) Negate a command or set its defaults
additional-paths	Additional paths configuration
receive	Additional paths Receive capability

Command Mode

/exec/configure/router-bgp/router-bgp-af /exec/configure/router-bgp/router-bgp-af-ipv4-mvpn /exec/configure/router-bgp/router-bgp-af-ipv6-mvpn /exec/configure/router-bgp/router-bgp-af-vpnv4 /exec/configure/router-bgp/router-bgp-af-vpnv6 /exec/configure/router-bgp/router-bgp-af-ipv4-label /exec/configure/router-bgp/router-bgp-af-ipv6-label /exec/configure/router-bgp/router-bgp-af-l2vpn-evpn

additional-paths selection route-map

[no] additional-paths selection route-map <rmap-name>

Syntax Description


no	(Optional) Negate a command or set its defaults
additional-paths	Additional paths configuration
selection	Additional paths selection
route-map	Route-map for additional paths selection
rmap-name	Route-map name

Command Mode

/exec/configure/router-bgp/router-bgp-af /exec/configure/router-bgp/router-bgp-af-vpnv4 /exec/configure/router-bgp/router-bgp-af-vpnv6 /exec/configure/router-bgp/router-bgp-af-ipv6-label /exec/configure/router-bgp/router-bgp-af-ipv4-mvpn /exec/configure/router-bgp/router-bgp-af-ipv6-mvpn /exec/configure/router-bgp/router-bgp-af-ipv4-label /exec/configure/router-bgp/router-bgp-af-l2vpn-evpn

additional-paths send

[no] additional-paths send

Syntax Description


no	(Optional) Negate a command or set its defaults
additional-paths	Additional paths configuration
send	Additional paths Send capability

Command Mode

/exec/configure/router-bgp/router-bgp-af /exec/configure/router-bgp/router-bgp-af-vpnv4 /exec/configure/router-bgp/router-bgp-af-vpnv6 /exec/configure/router-bgp/router-bgp-af-ipv6-label /exec/configure/router-bgp/router-bgp-af-ipv4-mvpn /exec/configure/router-bgp/router-bgp-af-ipv6-mvpn /exec/configure/router-bgp/router-bgp-af-ipv4-label /exec/configure/router-bgp/router-bgp-af-l2vpn-evpn

address-family ipv4

[no] address-family ipv4

Syntax Description


no	(Optional) Negate a command or set its defaults
address-family	Configure an address-family
ipv4	Configure IPv4 address-family

Command Mode

/exec/configure/config-sr-mpls/config-sr-mpls-conn-pfxsid

address-family ipv4 labeled-unicast

{ [ no | default ] } address-family ipv4 labeled-unicast

Syntax Description


no	(Optional) Negate a command or set its defaults
default	(Optional) Inherit values from a peer template
address-family	Configure an address-family for peer
ipv4	Configure IPv4 address-family
labeled-unicast	Configure labeled unicast sub-address-family

Command Mode

/exec/configure/router-bgp/router-bgp-neighbor /exec/configure/router-bgp/router-bgp-template-neighbor /exec/configure/router-bgp/router-bgp-prefixneighbor

address-family ipv4 labeled-unicast

[no] address-family ipv4 labeled-unicast

Syntax Description


no	(Optional) Negate a command or set its defaults
address-family	Configure an address-family
ipv4	Configure IPv4 address-family
labeled-unicast	Configure labeled unicast sub-address-family

Command Mode

/exec/configure/router-bgp

address-family ipv4 mdt

[no] address-family ipv4 mdt

Syntax Description


no	(Optional) Negate a command or set its defaults
address-family	Configure an address-family
ipv4	Configure IPv4 address-family
mdt	Configure Multicast Distribution Tree

Command Mode

/exec/configure/router-bgp

address-family ipv4 mdt

{ [ no | default ] } address-family ipv4 mdt

Syntax Description


no	(Optional) Negate a command or set its defaults
default	(Optional) Inherit values from a peer template
address-family	Configure an address-family
ipv4	Configure IPv4 address-family
mdt	Configure Multicast Distribution Tree

Command Mode

/exec/configure/router-bgp/router-bgp-neighbor /exec/configure/router-bgp/router-bgp-template-neighbor /exec/configure/router-bgp/router-bgp-prefixneighbor

address-family ipv4 mvpn

[no] address-family ipv4 mvpn

Syntax Description


no	(Optional) Negate a command or set its defaults
address-family	Configure an address-family
ipv4	Configure IPv4 address-family
mvpn	Configure Multicast VPN

Command Mode

/exec/configure/router-bgp

address-family ipv4 mvpn

{ [ no | default ] } address-family ipv4 mvpn

Syntax Description


no	(Optional) Negate a command or set its defaults
default	(Optional) Inherit values from a peer template
address-family	Configure an address-family
ipv4	Configure IPv4 address-family
mvpn	Configure Multicast VPN

Command Mode

/exec/configure/router-bgp/router-bgp-neighbor /exec/configure/router-bgp/router-bgp-template-neighbor /exec/configure/router-bgp/router-bgp-prefixneighbor

address-family ipv4 unicast

[no] address-family ipv4 unicast

Syntax Description


no	(Optional) Negate a command or set its defaults
address-family	Configure address family
ipv4	Configure IPv4 address family
unicast	Configure Unicast address family

Command Mode

/exec/configure/vrf

address-family ipv4 unicast

[no] address-family ipv4 unicast

Syntax Description


no	(Optional) Negate a command or set its defaults
address-family	Configure an address-family
ipv4	Configure IPv4 address-family
unicast	Configure unicast address-family

Command Mode

/exec/configure/router-rip

address-family ipv4 unicast

[no] address-family ipv4 unicast

Syntax Description


no	(Optional) Negate a command or set its defaults
address-family	Configure an address-family
ipv4	Configure IPv4 address-family
unicast	Configure unicast address-family

Command Mode

/exec/configure/router-rip/router-rip-vrf

address-family ipv4 unicast

[no] { address-family ipv4 unicast }

Syntax Description


no	(Optional) Negate a command or set its defaults
address-family	Configure Address Family and its parameters
ipv4	Configure IPv4 Address Family parameters
unicast	Unicast

Command Mode

/exec/configure/mpls_static

address-family ipv4 unicast

[no] address-family ipv4 unicast

Syntax Description


no	(Optional) Negate a command or set its defaults
address-family	Configure an address-family
ipv4	Configure IPv4 address-family
unicast	Configure unicast address-family

Command Mode

/exec/configure/router-isis/router-isis-vrf-common

address-family ipv4 unicast

[no] address-family ipv4 unicast

Syntax Description


no	(Optional) Negate a command or set its defaults
address-family	Configure an address-family
ipv4	Configure IPv4 address-family
unicast	Configure unicast address-family

Command Mode

/exec/configure/router-eigrp/router-eigrp-vrf-common

address-family ipv4 unicast

[no] address-family ipv4 { unicast | multicast }

Syntax Description


no	(Optional) Negate a command or set its defaults
address-family	Configure an address-family
ipv4	Configure IPv4 address-family
unicast	Configure unicast address-family
multicast	Configure multicast address-family

Command Mode

/exec/configure/router-bgp

address-family ipv4 unicast

[no] address-family ipv4 { unicast | multicast }

Syntax Description


no	(Optional) Negate a command or set its defaults
address-family	Configure an address-family
ipv4	Configure IPv4 address-family
unicast	Configure unicast address-family
multicast	Configure multicast address-family

Command Mode

/exec/configure/router-bgp/router-bgp-vrf

address-family ipv4 unicast

{ [ no | default ] } address-family ipv4 { unicast | multicast }

Syntax Description


no	(Optional) Negate a command or set its defaults
default	(Optional) Inherit values from a peer template
address-family	Configure an address-family for peer
ipv4	Configure IPv4 address-family
unicast	Configure Unicast sub-address-family
multicast	Configure Multicast sub-address-family

Command Mode

/exec/configure/router-bgp/router-bgp-neighbor /exec/configure/router-bgp/router-bgp-template-neighbor /exec/configure/router-bgp/router-bgp-prefixneighbor

address-family ipv4 unicast

[ no | default ] address-family ipv4 { unicast | multicast }

Syntax Description


no	(Optional) Negate a command or set its defaults
default	(Optional) Inherit values from a peer template
address-family	Configure an address-family for peer
ipv4	Configure IPv4 address-family
unicast	Configure Unicast sub-address-family
multicast	Configure Multicast sub-address-family

Command Mode

/exec/configure/router-bgp/router-bgp-vrf-neighbor /exec/configure/router-bgp/router-bgp-vrf-prefixneighbor

address-family ipv6 labeled-unicast

{ [ no | default ] } address-family ipv6 labeled-unicast

Syntax Description


no	(Optional) Negate a command or set its defaults
default	(Optional) Inherit values from a peer template
address-family	Configure an address-family for peer
ipv6	Configure IPv6 address-family
labeled-unicast	Configure labeled unicast sub-address-family

Command Mode

/exec/configure/router-bgp/router-bgp-neighbor /exec/configure/router-bgp/router-bgp-template-neighbor /exec/configure/router-bgp/router-bgp-prefixneighbor

address-family ipv6 labeled-unicast

[no] address-family ipv6 labeled-unicast

Syntax Description


no	(Optional) Negate a command or set its defaults
address-family	Configure an address-family
ipv6	Configure IPv6 address-family
labeled-unicast	Configure labeled unicast sub-address-family

Command Mode

/exec/configure/router-bgp

address-family ipv6 mvpn

[no] address-family ipv6 mvpn

Syntax Description


no	(Optional) Negate a command or set its defaults
address-family	Configure an address-family
ipv6	Configure IPv6 address-family
mvpn	Configure Multicast VPN

Command Mode

/exec/configure/router-bgp

address-family ipv6 mvpn

{ [ no | default ] } address-family ipv6 mvpn

Syntax Description


no	(Optional) Negate a command or set its defaults
default	(Optional) Inherit values from a peer template
address-family	Configure an address-family
ipv6	Configure IPv6 address-family
mvpn	Configure Multicast VPN

Command Mode

/exec/configure/router-bgp/router-bgp-neighbor /exec/configure/router-bgp/router-bgp-template-neighbor /exec/configure/router-bgp/router-bgp-prefixneighbor

address-family ipv6 unicast

[no] address-family ipv6 { unicast | multicast }

Syntax Description


no	(Optional) Negate a command or set its defaults
address-family	Configure an address-family
ipv6	Configure IPv6 address-family
unicast	Configure unicast address-family
multicast	Configure multicast address-family

Command Mode

/exec/configure/router-bgp/router-bgp-vrf

address-family ipv6 unicast

[no] address-family ipv6 unicast

Syntax Description


no	(Optional) Negate a command or set its defaults
address-family	Configure an address-family
ipv6	Configure IPv6 address-family
unicast	Configure unicast address-family

Command Mode

/exec/configure/router-rip

address-family ipv6 unicast

[no] address-family ipv6 unicast

Syntax Description


no	(Optional) Negate a command or set its defaults
address-family	Configure an address-family
ipv6	Configure IPv6 address-family
unicast	Configure unicast address-family

Command Mode

/exec/configure/router-rip/router-rip-vrf

address-family ipv6 unicast

[no] { address-family ipv6 unicast }

Syntax Description


no	(Optional) Negate a command or set its defaults
address-family	Configure Address Family and its parameters
ipv6	Configure IPv6 Address Family parameters
unicast	Unicast

Command Mode

/exec/configure/mpls_static

address-family ipv6 unicast

[no] address-family ipv6 unicast

Syntax Description


no	(Optional) Negate a command or set its defaults
address-family	Configure an address-family
ipv6	Configure IPv6 address-family
unicast	Configure unicast address-family

Command Mode

/exec/configure/router-isis/router-isis-vrf-common

address-family ipv6 unicast

[no] address-family ipv6 unicast

Syntax Description


no	(Optional) Negate a command or set its defaults
address-family	Configure an address-family
ipv6	Configure IPv6 address-family
unicast	Configure IPv6 unicast address-family

Command Mode

/exec/configure/router-ospf3

address-family ipv6 unicast

[no] address-family ipv6 unicast

Syntax Description


no	(Optional) Negate a command or set its defaults
address-family	Configure an address-family
ipv6	Configure IPv6 address-family
unicast	Configure IPv6 unicast address-family

Command Mode

/exec/configure/router-ospf3/vrf

address-family ipv6 unicast

[no] address-family ipv6 unicast

Syntax Description


no	(Optional) Negate a command or set its defaults
address-family	Configure an address-family
ipv6	Configure IPv6 address-family
unicast	Configure unicast address-family

Command Mode

/exec/configure/router-eigrp/router-eigrp-vrf-common

address-family ipv6 unicast

[no] address-family ipv6 unicast

Syntax Description


no	(Optional) Negate a command or set its defaults
address-family	Configure address family
ipv6	Configure IPv6 address family
unicast	Configure Unicast address family

Command Mode

/exec/configure/vrf

address-family ipv6 unicast

[no] address-family ipv6 { unicast | multicast }

Syntax Description


no	(Optional) Negate a command or set its defaults
address-family	Configure an address-family
ipv6	Configure IPv6 address-family
unicast	Configure unicast address-family
multicast	Configure multicast address-family

Command Mode

/exec/configure/router-bgp

address-family ipv6 unicast

{ [ no | default ] } address-family ipv6 { unicast | multicast }

Syntax Description


no	(Optional) Negate a command or set its defaults
default	(Optional) Inherit values from a peer template
address-family	Configure an address-family for peer
ipv6	Configure IPv6 address-family
unicast	Configure Unicast sub-address-family
multicast	Configure Multicast sub-address-family

Command Mode

/exec/configure/router-bgp/router-bgp-neighbor /exec/configure/router-bgp/router-bgp-template-neighbor /exec/configure/router-bgp/router-bgp-prefixneighbor

address-family ipv6 unicast

[ no | default ] address-family ipv6 { unicast | multicast }

Syntax Description


no	(Optional) Negate a command or set its defaults
default	(Optional) Inherit values from a peer template
address-family	Configure an address-family for peer
ipv6	Configure IPv6 address-family
unicast	Configure Unicast sub-address-family
multicast	Configure Multicast sub-address-family

Command Mode

/exec/configure/router-bgp/router-bgp-vrf-neighbor /exec/configure/router-bgp/router-bgp-vrf-prefixneighbor

address-family l2vpn evpn

{ [ no | default ] } address-family l2vpn evpn

Syntax Description


no	(Optional) Negate a command or set its defaults
default	(Optional) Inherit values from a peer template
address-family	Configure an address-family
l2vpn	Configure L2VPN address-family
evpn	Configure L2VPN EVPN address-family

Command Mode

/exec/configure/router-bgp/router-bgp-neighbor /exec/configure/router-bgp/router-bgp-template-neighbor /exec/configure/router-bgp/router-bgp-prefixneighbor

address-family l2vpn evpn

[no] address-family l2vpn evpn

Syntax Description


no	(Optional) Negate a command or set its defaults
address-family	Configure an address-family
l2vpn	Configure L2VPN address-family
evpn	Configure L2VPN EVPN address-family

Command Mode

/exec/configure/router-bgp

address-family l2vpn vpls

{ [ no | default ] } address-family l2vpn vpls

Syntax Description


no	(Optional) Negate a command or set its defaults
default	(Optional) Inherit values from a peer template
address-family	Configure an address-family
l2vpn	Configure L2VPN address-family
vpls	Configure L2VPN VPLS address-family

Command Mode

/exec/configure/router-bgp/router-bgp-neighbor /exec/configure/router-bgp/router-bgp-template-neighbor /exec/configure/router-bgp/router-bgp-prefixneighbor

address-family l2vpn vpls

[no] address-family l2vpn vpls

Syntax Description


no	(Optional) Negate a command or set its defaults
address-family	Configure an address-family
l2vpn	Configure L2VPN address-family
vpls	Configure L2VPN VPLS address-family

Command Mode

/exec/configure/router-bgp

address-family link-state

[no] address-family link-state

Syntax Description


no	(Optional) Negate a command or set its defaults
address-family	Configure an address-family
link-state	Configure link-state address-family

Command Mode

/exec/configure/router-bgp

address-family link-state

{ [ no | default ] } address-family link-state

Syntax Description


no	(Optional) Negate a command or set its defaults
default	(Optional) Inherit values from a peer template
address-family	Configure an address-family
link-state	Configure link-state address-family

Command Mode

/exec/configure/router-bgp/router-bgp-neighbor /exec/configure/router-bgp/router-bgp-template-neighbor /exec/configure/router-bgp/router-bgp-prefixneighbor

address-family vpnv4 unicast

[no] address-family vpnv4 unicast

Syntax Description


no	(Optional) Negate a command or set its defaults
address-family	Configure an address-family
vpnv4	Configure IPv4 VPN address-family
unicast	Configure Unicast sub-address-family

Command Mode

/exec/configure/router-bgp

address-family vpnv4 unicast

{ [ no | default ] } address-family vpnv4 unicast

Syntax Description


no	(Optional) Negate a command or set its defaults
default	(Optional) Inherit values from a peer template
address-family	Configure an address-family for peer
vpnv4	Configure IPv4 VPN address-family
unicast	Configure Unicast sub-address-family

Command Mode

/exec/configure/router-bgp/router-bgp-neighbor /exec/configure/router-bgp/router-bgp-template-neighbor /exec/configure/router-bgp/router-bgp-prefixneighbor

address-family vpnv6 unicast

[no] address-family vpnv6 unicast

Syntax Description


no	(Optional) Negate a command or set its defaults
address-family	Configure an address-family
vpnv6	Configure IPv6 VPN address-family
unicast	Configure Unicast sub-address-family

Command Mode

/exec/configure/router-bgp

address-family vpnv6 unicast

{ [ no | default ] } address-family vpnv6 unicast

Syntax Description


no	(Optional) Negate a command or set its defaults
default	(Optional) Inherit values from a peer template
address-family	Configure an address-family for peer
vpnv6	Configure IPv6 VPN address-family
unicast	Configure Unicast sub-address-family

Command Mode

/exec/configure/router-bgp/router-bgp-neighbor /exec/configure/router-bgp/router-bgp-template-neighbor /exec/configure/router-bgp/router-bgp-prefixneighbor

address

[no] address <ipv6_addr>

Syntax Description


no	(Optional) Negate a command or set its defaults
address	IP Address

Command Mode

/exec/configure/if-eth-any/vrrpv3_ipv6

address

address { <ctlr-ip> } | no address [ <ctlr-ip> ]

Syntax Description


no	Negate a command or set its defaults
address	Controller Address
ctlr-ip	Controller IPv4 address

Command Mode

/exec/configure/service-export

address

[no] address <start-ip> <end-ip>

Syntax Description


no	(Optional) Negate a command or set its defaults
address	Address range for the pool
start-ip	Start IP address
end-ip	End IP address

Command Mode

/exec/configure/ipnat-pool

address

{ address <ip_address> | no address [ <ip_address> ] }

Syntax Description


no	Negate a command or set its defaults
address	Add an IP address to the vr
ip_address	ip address

Command Mode

/exec/configure/if-eth-any/vrrp

address

[no] address <ip_addr> [ primary ]

Syntax Description


no	(Optional) Negate a command or set its defaults
address	IP Address
primary	(Optional) Primary Address
ip_addr	IPv4 Address

Command Mode

/exec/configure/if-eth-any/vrrpv3_ipv4

address

[no] address <ip_addr>

Syntax Description


no	(Optional) Negate a command or set its defaults
address	IP Address configuration
ip_addr	IP Address

Command Mode

/exec/configure/if-eth-any/vrrs

address

[no] address <ipv6_addr>

Syntax Description


no	(Optional) Negate a command or set its defaults
address	IP Address configuration

Command Mode

/exec/configure/if-eth-any/vrrs

address port-number

address { <ipv4-addr> | <ipv6-addr> } port-number <port-number> | no address

Syntax Description


no	Negate a command or set its defaults
address	Configure IPv4 or IPv6 address
ipv4-addr	IPv4 address of the BMP server
port-number	Configure the port for the BMP server
port-number	Port number value

Command Mode

/exec/configure/router-bgp/router-bgp-bmp-server

address primary

[no] address <ipv6_addr> primary

Syntax Description


no	(Optional) Negate a command or set its defaults
address	IP Address
primary	Primary Address

Command Mode

/exec/configure/if-eth-any/vrrpv3_ipv6

address secondary

{ address <ip_address> secondary | no address <ip_address> secondary }

Syntax Description


no	Negate a command or set its defaults
address	Add an IP address to the vr
ip_address	ip address
secondary	a virtual IP address without owner

Command Mode

/exec/configure/if-eth-any/vrrp

address secondary

[no] address <ip_addr> secondary

Syntax Description


no	(Optional) Negate a command or set its defaults
address	IP Address
secondary	Secondary Address
ip_addr	IPv4 Address

Command Mode

/exec/configure/if-eth-any/vrrpv3_ipv4

adjacency-check

[no] adjacency-check

Syntax Description


no	(Optional) Negate a command or set its defaults
adjacency-check	Adjacency's protocol support consistency check

Command Mode

/exec/configure/router-isis/router-isis-af-ipv4 /exec/configure/router-isis/router-isis-af-ipv6

advertise-gateway

[no] advertise-gateway

Syntax Description


no	(Optional) Negate a command or set its defaults
advertise-gateway	Advertise Gateway Mode

Command Mode

/exec/configure/if-vlan/hybrid

advertise-gw-ip

[ no | default ] advertise-gw-ip

Syntax Description


no	(Optional) Negate a command or set its defaults
default	(Optional) Inherit values from a peer template
advertise-gw-ip	Advertise Gateway IP in Type-5 routes to neighbor

Command Mode

/exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-evpn

advertise-labels

[no] advertise-labels [ vrf { <vrf-name> | <vrf-known-name> } ] [ [ for <pfx-list> [ to <peer-pfx-list> ] ] | [ interface <intf> ] ]

Syntax Description


no	(Optional) Negate a command or set its defaults
advertise-labels	Label advertisements
vrf	(Optional) VRF Routing/Forwarding instance information
vrf-name	(Optional) VPN Routing/Forwarding instance name
vrf-known-name	(Optional) Known VRF name
for	(Optional) Prefix list specifying controls on destination prefixes
pfx-list	(Optional) Name of prefix list
to	(Optional) Prefix list specifying controls on LDP peers
peer-pfx-list	(Optional) Name of prefix list
interface	(Optional) Advertise /32 interface address
intf	(Optional)

Command Mode

/exec/configure/ldp

advertise-map exist default advertise-map

{ [ no ] advertise-map <advt-rmap-name> { exist-map | non-exist-map } <cond-rmap-name> } | default advertise-map

Syntax Description


no	(Optional) Negate a command or set its defaults
default	Inherit values from a peer template
advertise-map	Specify route-map for conditional advertisement
exist-map	Condition route-map to advertise only when prefix in condition exists
non-exist-map	Condition route-map to advertise only when prefix in condition does not exist
advt-rmap-name	Route-map name
cond-rmap-name	Route-map name

Command Mode

/exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-label /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-label

advertise-pip

[no] advertise-pip

Syntax Description


no	(Optional) Negate a command or set its defaults
advertise-pip	advertise physical ip for type-5 route

Command Mode

/exec/configure/router-bgp/router-bgp-af-l2vpn-evpn

advertise-system-mac

[no] advertise-system-mac

Syntax Description


no	(Optional) Negate a command or set its defaults
advertise-system-mac	Advertise extra EVPN RT-2 with system MAC

Command Mode

/exec/configure/router-bgp/router-bgp-af-l2vpn-evpn

advertise evpn multicast

[no] advertise evpn multicast

Syntax Description


no	(Optional) Negate a command or set its defaults
advertise	Advertise L2 multicast capability
evpn	evpn
multicast	L2 multicast

Command Mode

/exec/configure

advertise interface

[no] advertise interface <interface> [ <level> ]

Syntax Description


no	(Optional) Negate a command or set its defaults
advertise	Advertise interface IP
interface	Advertise interface IP
interface	Interface to advertise
level	(Optional) IS-IS level

Command Mode

/exec/configure/router-isis/router-isis-af-ipv4 /exec/configure/router-isis/router-isis-af-ipv6

advertise local-labeled-route

[ no | default ] advertise local-labeled-route

Syntax Description


no	(Optional) Negate a command or set its defaults
default	(Optional) Inherit values from a peer template
advertise	Advertise to peer
local-labeled-route	Advertise a route with local label to peer

Command Mode

/exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af

advertise passive-only level-1

[no] advertise passive-only level-1

Syntax Description


no	(Optional) Negate a command or set its defaults
advertise	Control what we advertise in our LSP
passive-only	Advertise prefixes of passive interfaces only
level-1	Advertise prefixes of passive interfaces only on level-1

Command Mode

/exec/configure/router-isis/router-isis-af-ipv4 /exec/configure/router-isis/router-isis-af-ipv6

advertise passive-only level-2

[no] advertise passive-only level-2

Syntax Description


no	(Optional) Negate a command or set its defaults
advertise	Control what we advertise in our LSP
passive-only	Advertise prefixes of passive interfaces only
level-2	Advertise prefixes of passive interfaces only on level-2

Command Mode

/exec/configure/router-isis/router-isis-af-ipv4 /exec/configure/router-isis/router-isis-af-ipv6

advertise virtual-rmac

[no] advertise virtual-rmac

Syntax Description


no	(Optional) Negate a command or set its defaults
advertise	Reachability advertisement
virtual-rmac	Advertise virtual RMAC capability

Command Mode

/exec/configure/if-nve

advertisement-interval

{ advertisement-interval <interval_time> | no advertisement-interval [ <interval_time> ] }

Syntax Description


no	Negate a command or set its defaults
advertisement-interval	Set the time interval between advertisement
interval_time	Time interval (in seconds) between advertisements

Command Mode

/exec/configure/if-eth-any/vrrp

advertisement-interval

advertisement-interval <adv-sec> | { no | default } advertisement-interval [ <adv-sec> ]

Syntax Description


no	Negate a command or set its defaults
default	Inherit values from a peer template
advertisement-interval	Minimum interval between sending BGP routing updates
adv-sec	Time in seconds

Command Mode

/exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv4 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv6

afd queue-desired

[no] afd queue-desired <q-desired> { bytes | kbytes | mbytes } [ ecn ]

Syntax Description


no	(Optional) Negate a command or set its defaults
afd	Configure AFD parameters
queue-desired	Specify Queue Desired for AFD
bytes	Bytes
kbytes	Kilo bytes
mbytes	Mega bytes
ecn	(Optional) ECN

Command Mode

/exec/configure/policy-map/type/queuing/class

affinity-group

{ affinity-group <affinity_group_id> } | { { no | default } affinity-group [ <affinity_group_id> ] }

Syntax Description


no	Negate a command or set its defaults
default	Inherit values from a peer template
affinity-group	Configure an affinity group
affinity_group_id	Affinity Group ID

Command Mode

/exec/configure/router-bgp/router-bgp-neighbor-sess

affinity-group activate

affinity-group activate <affinity_group_id> | no affinity-group activate [ <affinity_group_id> ]

Syntax Description


no	Negate a command or set its defaults
affinity-group	Configure an affinity group
activate	Activate the affinity group
affinity_group_id	AFFINITY Group ID

Command Mode

/exec/configure/router-bgp

affinity-map

[no] affinity-map

Syntax Description


no	(Optional) Negate a command or set its defaults
affinity-map	Configure Affinity map

Command Mode

/exec/configure/sr/te

affinity

[no] affinity

Syntax Description


no	(Optional) Negate a command or set its defaults
affinity	Configure Affinity Constraints

Command Mode

/exec/configure/sr/te/pol/cndpaths/pref/constraint

affinity

[no] affinity

Syntax Description


no	(Optional) Negate a command or set its defaults
affinity	Configure Affinity Constraints

Command Mode

/exec/configure/sr/te/color/cndpaths/pref/constraint

affinity

[no] affinity

Syntax Description


no	(Optional) Negate a command or set its defaults
affinity	Specify the interface affinities

Command Mode

/exec/configure/sr/te/if

age

{ [ no ] age <age> | no age }

Syntax Description


age	Provide the age value for this INT flow-profile
age	flow-profile age (seconds). Default is 30.

Command Mode

/exec/configure/config-int-flow-prof

age

{ [ no ] age <age> | no age }

Syntax Description


age	Provide the age value for this POSTCARD flow-profile
age	flow-profile age (seconds). Default is 30.

Command Mode

/exec/configure/config-postcard-flow-prof

aggregate-address

[no] aggregate-address { <ip-addr> <ip-mask> | <ip-prefix> } [ as-set | summary-only | suppress-map <suppress-rmap> | advertise-map <advertise-rmap> | attribute-map <attribute-rmap> ] +

Syntax Description


no	(Optional) Negate a command or set its defaults
aggregate-address	Configure BGP aggregate prefixes
ip-addr	Aggregate address
ip-mask	Aggregate mask
ip-prefix	Aggregate prefix
summary-only	(Optional) Don't advertise more specifics
as-set	(Optional) Generate AS-SET information
suppress-map	(Optional) Conditionally filter more specific routes
advertise-map	(Optional) Select attribute information from specific routes
attribute-map	(Optional) Set attribute information of aggregate
advertise-rmap	(Optional) Route-map name
suppress-rmap	(Optional) Route-map name
attribute-rmap	(Optional) Route-map name

Command Mode

/exec/configure/router-bgp/router-bgp-af-ipv4 /exec/configure/router-bgp/router-bgp-vrf-af-ipv4

aggregate-address

[no] aggregate-address <ipv6-prefix> [ as-set | summary-only | suppress-map <suppress-rmap> | advertise-map <advertise-rmap> | attribute-map <attribute-rmap> ] +

Syntax Description


no	(Optional) Negate a command or set its defaults
aggregate-address	Configure BGP aggregate IPv6 prefixes
as-set	(Optional) Generate AS-SET information
summary-only	(Optional) Don't advertise more specifics
suppress-map	(Optional) Conditionally filter more specific routes
advertise-map	(Optional) Select attribute information from specific routes
attribute-map	(Optional) Set attribute information of aggregate
advertise-rmap	(Optional) Route-map name
suppress-rmap	(Optional) Route-map name
attribute-rmap	(Optional) Route-map name

Command Mode

/exec/configure/router-bgp/router-bgp-af-ipv6 /exec/configure/router-bgp/router-bgp-vrf-af-ipv6

air-print helper

[no] air-print helper

Syntax Description


no	(Optional) Negate a command or set its defaults
air-print	Airprint Helper functionality - enabling sub-PTR functionality
helper	Airprint Helper functionality - enabling sub-PTR functionality

Command Mode

/exec/configure/mdns-sd

alert-group user-def-cmd

{ alert-group { Configuration | Diagnostic | Environmental | Inventory | License | Linecard-Hardware | Supervisor-Hardware | Syslog-group-port | System | Test } [ index <i0> ] user-def-cmd <s0> | no alert-group { Configuration | Diagnostic | Environmental | Inventory | License | Linecard-Hardware | Supervisor-Hardware | Syslog-group-port | System | Test } index <i0> }

Syntax Description


no	Negate a command or set its defaults
alert-group	alert group
user-def-cmd	configure a cli command for an alert group
index	(Optional) configure an index(1 to 5) for the cli command for the alert group
i0	(Optional) Index between 1 to 5 associate with cli command for an alert group
s0	A valid CLI command
Environmental	Power,fan,temperature related events
Inventory	Inventory status events
License	Events related to licensing
Linecard-Hardware	Linecard related events
Supervisor-Hardware	Supervisor related events
Syslog-group-port	Events related to syslog messages filed by port manager
System	Software related events
Test	User generated test events
Configuration	Events related to Configuration
Diagnostic	Events related to Diagnostic

Command Mode

/exec/configure/callhome

alloc mode

[no] alloc mode <sid-alloc-mode>

Syntax Description


no	(Optional) Negate a command or set its defaults
alloc	Sid allocation parameters
mode	Specify sid allocation mode
sid-alloc-mode

Command Mode

/exec/configure/router-bgp/router-bgp-vrf-af/router-bgp-vrf-af-srv6 /exec/configure/router-bgp/router-bgp-af/router-bgp-af-srv6

alloc mode

[no] alloc mode <sid-alloc-mode>

Syntax Description


no	(Optional) Negate a command or set its defaults
alloc	Sid allocation parameters
mode	Specify sid allocation mode
sid-alloc-mode

Command Mode

/exec/configure/router-bgp/router-bgp-vrf/router-bgp-vrf-srv6 /exec/configure/router-bgp/router-bgp-srv6

allocate-index

{ allocate-index <id> } | { no allocate-index [ <id> ] }

Syntax Description


no	Unconfigure allocate-index
allocate-index	Configure allocate-index
id	Specify allocate-index

Command Mode

/exec/configure/router-bgp/router-bgp-vrf

allocate-label all

[no] allocate-label { all | route-map <rmap-name> }

Syntax Description


no	(Optional) Negate a command or set its defaults
allocate-label	Configure label allocation for this AF
all	Allocate labels for all routes
route-map	Allocate labels for selected routes
rmap-name	Route-map name

Command Mode

/exec/configure/router-bgp/router-bgp-af-ipv6 /exec/configure/router-bgp/router-bgp-af-ipv4

allocate-label option-b

[no] allocate-label option-b

Syntax Description


no	(Optional) Negate a command or set its defaults
allocate-label	Allow allocation of labels
option-b	Allow allocation of option B labels

Command Mode

/exec/configure/router-bgp/router-bgp-af-vpnv4 /exec/configure/router-bgp/router-bgp-af-vpnv6

allocate1 interface2

allocate1 interface2 { <interface-id> [ force ] | unallocated-interfaces }

Syntax Description


allocate1	Assign interfaces to vdc
interface2	Assign interface range to vdc
interface-id	Assign interface range to vdc
force	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED
unallocated-interfaces	Best-effort trying to move all interfaces in the unallocated pool into this vdc

Command Mode

/exec/configure/vdc

allocate2 fcoe-vlan-range

{ allocate2 fcoe-vlan-range [ <vlan_range> ] [ from vdcs <vdc_names> ] } | { no allocate2 fcoe-vlan-range [ <vlan_range> | { from vdcs <vdc_names> } ] }

Syntax Description


no	Negate a command or set its defaults
allocate2	Assign interfaces to vdc
fcoe-vlan-range	vlans reserved for FCoE
vlan_range	(Optional) vlans reserved for FCoE
from	(Optional) which vdcs will be sharing ports with the FCoE vdc
vdcs	(Optional) which vdcs will be sharing ports with the FCoE vdc
vdc_names	(Optional) which vdcs will be sharing porst with the FCoE vdc

Command Mode

/exec/configure/vdc

allocate3 shared interface3

[no] allocate3 shared interface3 <sinterface-id>

Syntax Description


no	(Optional) Negate a command or set its defaults
allocate3	Assign interfaces to vdc
interface3	Assign interface range to vdc
sinterface-id	Assign interface range to vdc
shared	Shared this port using the reserved FCoE vlans

Command Mode

/exec/configure/vdc

allow-vni-in-ethertag

[no] allow-vni-in-ethertag

Syntax Description


no	(Optional) Negate a command or set its defaults
allow-vni-in-ethertag	Allow VNI in Ethernet Tag field in EVPN route

Command Mode

/exec/configure/router-bgp/router-bgp-af-l2vpn-evpn

allow feature-set

[no] allow feature-set <fs>

Syntax Description


no	(Optional) Negate a command or set its defaults
allow	Used to change permisions inside a vdc
feature-set	Change which feature-sets the user is able to enable inside the vdc
fs	installed feature-sets

Command Mode

/exec/configure/vdc

allowas-in

[ no | default ] allowas-in [ <allowas-in-cnt> ]

Syntax Description


no	(Optional) Negate a command or set its defaults
default	(Optional) Inherit values from a peer template
allowas-in	Accept as-path with my AS present in it
allowas-in-cnt	(Optional) Number of occurrences of AS number, default is 3

Command Mode

/exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-vpls

allowas-in

[ no | default ] allowas-in [ <allowas-in-cnt> ]

Syntax Description


no	(Optional) Negate a command or set its defaults
default	(Optional) Inherit values from a peer template
allowas-in	Accept as-path with my AS present in it
allowas-in-cnt	(Optional) Number of occurrences of AS number, default is 3

Command Mode

/exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv4 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv6 /exec/configure/router-bgp/router-bgp-vrf-neighbor/router-bgp-vrf-neighbor-af-ipv4 /exec/configure/router-bgp/router-bgp-vrf-neighbor/router-bgp-vrf-neighbor-af-ipv6 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-evpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-label /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-label /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-link-state /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mvpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-mvpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mdt

allowed-locators

{ [ no ] allowed-locators { <rloc> | <rloc6> } + }

Syntax Description


no	(Optional) Negate a command or set its defaults
allowed-locators	List of locators from LISP site
rloc	IPv4 locator allowed in registered locator-set

Command Mode

/exec/configure/lisp-site /exec/configure/vrf/lisp-site

allowed-vlans

allowed-vlans { <allow-vlans> | add <add-vlans> | except <except-vlans> | remove <remove-vlans> | all }

Syntax Description


allowed-vlans	Set list of allowed vlans that can be used for interface configuration
allow-vlans	VLAN ID 1-4094 or range(s) like: 1-5, 10 or 2-5,7-19
add	add VLANs to the current list
add-vlans	VLAN ID 1-4094 or range(s) like: 1-5, 10 or 2-5,7-19
except	all VLANs except the following
except-vlans	VLAN ID 1-4094 or range(s) like: 1-5, 10 or 2-5,7-19
remove	remove VLANs from the current list
remove-vlans	VLAN ID 1-4094 or range(s) like: 1-5, 10 or 2-5,7-19
all	all VLANs

Command Mode

/exec/configure/vmt-conn

amt flush-routes

[no] amt flush-routes

Syntax Description


no	(Optional) Negate a command or set its defaults
amt	AMT global configuration commands
flush-routes	Remove routes when restarting AMT

Command Mode

/exec/configure /exec/configure/vrf

amt pseudo-interface

{ { amt pseudo-interface <interface> } | { no amt pseudo-interface [ <interface> ] } }

Syntax Description


no	Negate a command or set its defaults
amt	AMT global configuration commands
pseudo-interface	Tunnel to relay for forwarding IGMP/MLD messages
interface	Intername name to used for AMT pseudo interface

Command Mode

/exec/configure /exec/configure/vrf

analytics

[no] analytics

Syntax Description


analytics	Analytics configurations in netflow and analytics mode

Command Mode

/exec/configure

analytics cluster

[no] analytics cluster <clustername> [ vrf <vrfName> ] [ srcIf <src_intf> ]

Syntax Description


no	(Optional) Negate a command or set its defaults
analytics	Feature Analytics
cluster	Analytics cluster
clustername	Cluster name
vrf	(Optional) VRF Name
vrfName	(Optional) VRF name
srcIf	(Optional) Source Interface
src_intf	(Optional) Source Interface

Command Mode

/exec/configure

announce duration

[no] announce duration <sec> [ renew-offset <off> ]

Syntax Description


no	(Optional) Negate a command or set its defaults
announce	announce
duration	session duration
renew-offset	(Optional) session duration renewal offset
sec	seconds
off	(Optional) offset

Command Mode

/exec/configure/ptp-ucast-nego-schema

announce duration range

[no] announce duration range <min> <max>

Syntax Description


no	(Optional) Negate a command or set its defaults
announce	announce
duration	session duration
range	range of acceptable values
min	minimum in seconds
max	maximum in seconds

Command Mode

/exec/configure/ptp-ucast-nego-schema

announce interval

[no] announce interval <intv>

Syntax Description


no	(Optional) Negate a command or set its defaults
announce	announce
interval	interval
intv	log seconds

Command Mode

/exec/configure/ptp-ucast-nego-schema

announce interval range

[no] announce interval range <min> <max>

Syntax Description


no	(Optional) Negate a command or set its defaults
announce	announce
interval	interval
range	range of acceptable values
min	minimum in log seconds
max	maximum in log seconds

Command Mode

/exec/configure/ptp-ucast-nego-schema

anonymous-id

{ [ no ] anonymous-id <id> }

Syntax Description


anonymous-id	anonymous identity associated with this profile
id	identity name

Command Mode

/exec/configure/dot1x-cred

anti-jam disable

[no] anti-jam disable

Syntax Description


no	(Optional) Negate a command or set its defaults
anti-jam	Anti-jam mode configuration
disable	Disable anti-jam mode

Command Mode

/exec/configure/gnss-if

app-default-gateway guest-interface

{ app-default-gateway <ip-addr> guest-interface <interface-id> | no app-default-gateway [ <ip-addr> [ guest-interface <interface-id> ] ] }

Syntax Description


no	Negate a command or set its defaults
app-default-gateway	Application default-gateway
ip-addr	Application default-gateway
guest-interface	guest-interface
interface-id	Guest interface number in range of 0..3

Command Mode

/exec/configure/app-hosting-appid

app-default-ipv6-gateway guest-interface

{ app-default-ipv6-gateway <ipv6-addr> guest-interface <interface-id> | no app-default-ipv6-gateway [ <ipv6-addr> [ guest-interface <interface-id> ] ] }

Syntax Description


no	Negate a command or set its defaults
app-default-ipv6-gateway	Application default-ipv6-gateway
guest-interface	guest-interface
interface-id	Guest interface number in range of 0..3

Command Mode

/exec/configure/app-hosting-appid

app-hosting appid

app-hosting { activate | start | stop | deactivate | uninstall } appid <app-hosting-appid>

Syntax Description


app-hosting	app-hosting exec actions
activate	Activate the Application
start	Start the Application
stop	Stop the Application
deactivate	Deactivate the Application
uninstall	Uninstall the Application
appid	Application ID
app-hosting-appid	AppId name

Command Mode

/exec

app-hosting appid

[no] app-hosting appid <app-hosting-appid>

Syntax Description


no	(Optional) Negate a command or set its defaults
app-hosting	app-hosting
appid	app-hosting appid submode
app-hosting-appid	Enter Application Name

Command Mode

/exec/configure

app-hosting bootflash backend storage limit

{ app-hosting bootflash backend storage limit <size> | no app-hosting bootflash backend storage limit [ <size> ] }

Syntax Description


no	Negate a command or set its defaults
app-hosting	app-hosting
bootflash	bootflash
backend	backend
storage	storage
limit	limit
size	size in MB

Command Mode

/exec/configure

app-hosting bridge

[no] app-hosting bridge <bridge-id>

Syntax Description


no	(Optional) Negate a command or set its defaults
app-hosting	app-hosting feature configuration
bridge	app-hosting bridge submode
bridge-id	Bridge index

Command Mode

/exec/configure

app-hosting data appid copy

app-hosting data appid <app-hosting-appid> copy <src-file> <dst-file>

Syntax Description


app-hosting	app-hosting exec actions
data	Application data
appid	Application ID
app-hosting-appid	AppId name
copy	Copy file
src-file	Source file
dst-file	Destination file

Command Mode

/exec

app-hosting data appid delete

app-hosting data appid <app-hosting-appid> delete <dst-file>

Syntax Description


app-hosting	app-hosting exec actions
data	Application data
appid	Application ID
app-hosting-appid	AppId name
delete	Delete file
dst-file	Destination file

Command Mode

/exec

app-hosting install appid package

app-hosting install appid <app-hosting-appid> package <uri>

Syntax Description


app-hosting	app-hosting exec actions
install	Install the Application
appid	Application ID
app-hosting-appid	AppId name
package	Package tarball
uri	Package tarball

Command Mode

/exec

app-hosting signed-verification disable app-hosting signed-verification enable

[no] app-hosting signed-verification disable | app-hosting signed-verification enable

Syntax Description


no	(Optional) Negate a command or set its defaults
app-hosting	app-hosting
signed-verification	Signature verification for app-hosting application
disable	disable package signing
enable	enable package signing (default)

Command Mode

/exec/configure

app-hosting upgrade appid package

app-hosting upgrade appid <app-hosting-appid> package <uri> [ no-recover ]

Syntax Description


app-hosting	app-hosting exec actions
upgrade	Upgrade the Application
appid	Application ID
app-hosting-appid	AppId name
package	Package tarball
uri	Package tarball
no-recover	(Optional) bypass removal of read-only layers

Command Mode

/exec

app-resource docker

[no] app-resource docker

Syntax Description


no	(Optional) Negate a command or set its defaults
app-resource	Application resources
docker	Application docker options

Command Mode

/exec/configure/app-hosting-appid

app-resource profile custom

[no] app-resource profile custom

Syntax Description


no	(Optional) Negate a command or set its defaults
app-resource	Application resources
profile	Application profile name
custom	custom

Command Mode

/exec/configure/app-hosting-appid

app-vnic guest-interface

{ app-vnic { management | gateway bridge <bridge-id> } guest-interface <interface-id> | no app-vnic { management | gateway [ bridge <bridge-id> ] } [ guest-interface <interface-id> ] }

Syntax Description


no	Negate a command or set its defaults
app-vnic	Virtual Network Interface
management	management
gateway	bridge for gateway
bridge	bridge for gateway
bridge-id	bridge for gateway
guest-interface	guest-interface
interface-id	Guest interface number in range of 0..3

Command Mode

/exec/configure/app-hosting-appid

apply profile

[no] apply profile { <all_conf_profile_name> } [ include-profile <include-profile> ] [ { param-instance <plistinst> | include-instance <plistinst> } + ]

Syntax Description


no	(Optional) Negate a command or set its defaults
apply	Apply a config-profile
profile	Apply a config-profile
all_conf_profile_name	Enter the name of the profile
param-instance	(Optional) Enter the name of the param-instance
plistinst	(Optional) Enter the name of the instance
include-profile	(Optional) Enter the name of the include profile
include-profile	(Optional) Enter the name of the include profile
include-instance	(Optional) Enter the param-instance corresponding to the first included profile
plistinst	(Optional) Enter the name of the include instance

Command Mode

/exec/configure

area authentication

[no] area <area-id-ip> authentication [ message-digest ]

Syntax Description


no	(Optional) Negate a command or set its defaults
area	Configure area properties
area-id-ip	Area Id as an integer or ip address
authentication	Enable authentication for the area
message-digest	(Optional) Use message-digest authentication

Command Mode

/exec/configure/router-ospf /exec/configure/router-ospf/vrf

area authentication disable ipsec spi md5 sha1 key-chain

{ [ no ] area <area-id-ip> authentication { disable | ipsec spi <spi_id> { md5 <akey> | sha1 <akey> | key-chain <keychain_ah> } } } | { no area <area-id-ip> authentication { disable | ipsec spi <spi_id> } }

Syntax Description


no	(Optional) Negate a command or set its defaults
area	Configure area properties
area-id-ip	Area Id as an integer or ip address
authentication	Enable Authentication
disable	Disable Authentication
ipsec	IPSec
spi	Security Parameter Index
spi_id	SPI Value
md5	Use the MD5 algorithim
akey	Authentication Key
sha1	Use the SHA1 algorithim
akey	Authentication Key
key-chain	Authentication password key-chain
keychain_ah	Authentication key-chain name

Command Mode

/exec/configure/router-ospf3 /exec/configure/router-ospf3/vrf

area default-cost

{ { area <area-id-ip> default-cost <cost> } | { no area <area-id-ip> default-cost [ <cost> ] } }

Syntax Description


no	Negate a command or set its defaults
area	Configure area properties
area-id-ip	Area Id as an integer or ip address
default-cost	Specify default-cost for default summary LSA
cost	Cost value

Command Mode

/exec/configure/router-ospf /exec/configure/router-ospf/vrf

area default-cost

{ { area <area-id-ip> default-cost <cost> } | { no area <area-id-ip> default-cost [ <cost> ] } }

Syntax Description


no	Negate a command or set its defaults
area	Configure area properties
area-id-ip	Area Id as an integer or ip address
default-cost	Specify default-cost for default inter-area-prefix LSA
cost	Cost value

Command Mode

/exec/configure/router-ospf3/router-ospf3-af-ipv6 /exec/configure/router-ospf3/vrf/router-ospf3-af-ipv6

area encryption disable ipsec spi esp 3des aes 128 authentication sha1

{ [ no ] area <area-id-ip> encryption { disable | ipsec spi <spi_id> esp { 3des <ekey> | aes { 128 <ekey> } } authentication { sha1 <akey> | null } } } | { [ no ] area <area-id-ip> encryption ipsec spi <spi_id> esp key-chain <keychain_enc> authentication { key-chain <keychain_ah> | null } } | { [ no ] area <area-id-ip> encryption ipsec spi <spi_id> esp null authentication { sha1 <akey> | key-chain <keychain_ah> } } | { no area <area-id-ip> encryption ipsec spi <spi_id> }

Syntax Description


no	(Optional) Negate a command or set its defaults
area	Configure area properties
area-id-ip	Area Id as an integer or ip address
encryption	Enable Encryption on all Interface belong to this Area
disable	Disable Encryption
ipsec	IPSec
spi	Security Parameter Index
spi_id	SPI Value
esp	Specify encryption parameters
3des	Use the triple DES algorithim
ekey	Encryption Key
aes	Use the AES algorithim
128	Use the 128-bit AES algorithim
ekey	Encryption Key
authentication	Specify authentication parameters
sha1	Use the SHA1 algorithim
akey	Authentication Key
key-chain	Encryption password key-chain
keychain_enc	Encryption key-chain name
key-chain	Authentication password key-chain
keychain_ah	Authentication key-chain name
null	Use NULL authentication

Command Mode

/exec/configure/router-ospf3 /exec/configure/router-ospf3/vrf

area filter-list route-map in

{ area <area-id-ip> filter-list route-map { <policy-name> | <rtr_pol_name> } { in | out } } | { no area <area-id-ip> filter-list route-map { <policy-name> | <rtr_pol_name> } [ in | out ] }

Syntax Description


no	Negate a command or set its defaults
area	Configure area properties
area-id-ip	Area Id as an integer or ip address
filter-list	Filter prefixes between OSPF areas
route-map	Name of filter policy
policy-name	Route-map name
rtr_pol_name	An existing routing-rules policy
in	Filter networks sent to this area
out	Filter networks sent from this area

Command Mode

/exec/configure/router-ospf3/router-ospf3-af-ipv6 /exec/configure/router-ospf3/vrf/router-ospf3-af-ipv6

area filter-list route-map in

{ area <area-id-ip> filter-list route-map { <policy-name> | <rtr_pol_name> } { in | out } } | { no area <area-id-ip> filter-list route-map { <policy-name> | <rtr_pol_name> } [ in | out ] }

Syntax Description


no	Negate a command or set its defaults
area	Configure area properties
area-id-ip	Area Id as an integer or ip address
filter-list	Filter prefixes between OSPF areas
route-map	Name of filter policy
policy-name	Route-map name
rtr_pol_name	An existing routing-rules policy
in	Filter networks sent to this area
out	Filter networks sent from this area

Command Mode

/exec/configure/router-ospf /exec/configure/router-ospf/vrf

area nssa

[no] area <area-id-ip> nssa { [ no-summary ] [ no-redistribution ] [ default-information-originate [ route-map <policy-name> ] ] } +

Syntax Description


no	(Optional) Negate a command or set its defaults
area	Configure area properties
area-id-ip	Area Id as an integer or ip address
nssa	Configure area as NSSA
no-summary	(Optional) Do not send summary LSAs into NSSA area
no-redistribution	(Optional) Do not send redistributed LSAs into NSSA area
default-information-originate	(Optional) Originate Type-7 default LSA into NSSA area
route-map	(Optional) Policy to control distribution of default route
policy-name	(Optional) Route-map name

Command Mode

/exec/configure/router-ospf3 /exec/configure/router-ospf3/vrf

area nssa

[no] area <area-id-ip> nssa { [ no-summary ] [ no-redistribution ] [ default-information-originate [ route-map <policy-name> ] ] } +

Syntax Description


no	(Optional) Negate a command or set its defaults
area	Configure area properties
area-id-ip	Area Id as an integer or ip address
nssa	Configure area as NSSA
no-summary	(Optional) Do not send summary LSAs into NSSA area
no-redistribution	(Optional) Do not send redistributed LSAs into NSSA area
default-information-originate	(Optional) Originate Type-7 default LSA into NSSA area
route-map	(Optional) Policy to control distribution of default route
policy-name	(Optional) Route-map name

Command Mode

/exec/configure/router-ospf /exec/configure/router-ospf/vrf

area nssa translate type7 always never supress-fa

{ area <area-id-ip> nssa translate type7 { always [ supress-fa ] | never | supress-fa } } | { no area <area-id-ip> nssa translate type7 [ always [ supress-fa ] | never | supress-fa ] }

Syntax Description


no	Negate a command or set its defaults
area	Configure area properties
area-id-ip	Area Id as an integer or ip address
nssa	Configure area as NSSA
translate	Translate LSA
type7	From NSSA-external (Type 7) to AS-external (Type 5)
always	Always translate LSAs
never	Never translate LSAs
supress-fa	(Optional) Supress forwarding address in translated LSAs

Command Mode

/exec/configure/router-ospf3 /exec/configure/router-ospf3/vrf

area nssa translate type7 always never supress-fa

{ area <area-id-ip> nssa translate type7 { always [ supress-fa ] | never | supress-fa } } | { no area <area-id-ip> nssa translate type7 [ always [ supress-fa ] | never | supress-fa ] }

Syntax Description


no	Negate a command or set its defaults
area	Configure area properties
area-id-ip	Area Id as an integer or ip address
nssa	Configure area as NSSA
translate	Translate LSA
type7	From Type 7 to Type 5
always	Always translate LSAs
never	Never translate LSAs
supress-fa	(Optional) Supress forwarding address in translated LSAs

Command Mode

/exec/configure/router-ospf /exec/configure/router-ospf/vrf

area range

[no] area <area-id-ip> range { <ip-dest> <ip-mask> | <ip-prefix> } { [ not-advertise ] [ cost <conf-cost> ] } +

Syntax Description


no	(Optional) Negate a command or set its defaults
area	Configure area properties
area-id-ip	Area Id as an integer or ip address
range	Configure an address range for an area
ip-dest	IP prefix format: i.i.i.i
ip-mask	IP network mask format: m.m.m.m
ip-prefix	IP prefix format: x.x.x.x/ml
not-advertise	(Optional) Suppress advertising the specified range
cost	(Optional) Cost to use for range
conf-cost	(Optional) Cost value

Command Mode

/exec/configure/router-ospf /exec/configure/router-ospf/vrf

area range

[no] area <area-id-ip> range <ipv6-prefix> { [ not-advertise ] [ cost <conf-cost> ] } +

Syntax Description


no	(Optional) Negate a command or set its defaults
area	Configure area properties
area-id-ip	Area Id as an integer or ip address
range	Configure an address range for an area
not-advertise	(Optional) Suppress advertising the specified range
cost	(Optional) Cost to use for range
conf-cost	(Optional) Cost value

Command Mode

/exec/configure/router-ospf3/router-ospf3-af-ipv6 /exec/configure/router-ospf3/vrf/router-ospf3-af-ipv6

area segment-routing mpls

[no] area <area-id-ip> segment-routing { mpls | disable }

Syntax Description


no	(Optional) Negate a command or set its defaults
area	Configure area properties
area-id-ip	Area Id as an integer or ip address
segment-routing	Segment routing parameters
disable	Disable segment routing in area
mpls	Enable segment routing MPLS in area

Command Mode

/exec/configure/router-ospf

area sham-link

[no] area <area-id-ip> sham-link <source-address> <dest-address>

Syntax Description


no	(Optional) Negate a command or set its defaults
area	Configure area properties
area-id-ip	Area Id as an integer or ip address
sham-link	Define a sham link and its parameters
source-address	IP addr associated with sham-link source
dest-address	IP addr associated with sham-link destination

Command Mode

/exec/configure/router-ospf/vrf

area stub

[no] area <area-id-ip> stub [ no-summary ]

Syntax Description


no	(Optional) Negate a command or set its defaults
area	Configure area properties
area-id-ip	Area Id as an integer or ip address
stub	Configure area as a stub
no-summary	(Optional) Prevent ABR from sending summary LSAs into stub area

Command Mode

/exec/configure/router-ospf3 /exec/configure/router-ospf3/vrf

area stub

[no] area <area-id-ip> stub [ no-summary ]

Syntax Description


no	(Optional) Negate a command or set its defaults
area	Configure area properties
area-id-ip	Area Id as an integer or ip address
stub	Configure area as a stub
no-summary	(Optional) Prevent ABR from sending summary LSAs into stub area

Command Mode

/exec/configure/router-ospf /exec/configure/router-ospf/vrf

area virtual-link

[no] area <area-id-ip> virtual-link <routerid>

Syntax Description


no	(Optional) Negate a command or set its defaults
area	Configure area properties
area-id-ip	Area Id as an integer or ip address
virtual-link	Define a virtual link and its parameters
routerid	Router ID associated with virtual link neighbor

Command Mode

/exec/configure/router-ospf3

area virtual-link

[no] area <area-id-ip> virtual-link <routerid>

Syntax Description


no	(Optional) Negate a command or set its defaults
area	Configure area properties
area-id-ip	Area Id as an integer or ip address
virtual-link	Define a virtual link and its parameters
routerid	Router ID associated with virtual link neighbor

Command Mode

/exec/configure/router-ospf3/vrf

area virtual-link

[no] area <area-id-ip> virtual-link <routerid>

Syntax Description


no	(Optional) Negate a command or set its defaults
area	Configure area properties
area-id-ip	Area Id as an integer or ip address
virtual-link	Define a virtual link and its parameters
routerid	Router ID associated with virtual link neighbor

Command Mode

/exec/configure/router-ospf

area virtual-link

[no] area <area-id-ip> virtual-link <routerid>

Syntax Description


no	(Optional) Negate a command or set its defaults
area	Configure area properties
area-id-ip	Area Id as an integer or ip address
virtual-link	Define a virtual link and its parameters
routerid	Router ID associated with virtual link neighbor

Command Mode

/exec/configure/router-ospf/vrf

arp access-list

[no] arp access-list <name>

Syntax Description


no	(Optional) Negate a command or set its defaults
arp	ARP access-list configuration commands
access-list	Configure access list
name	List name

Command Mode

/exec/configure

as-format asdot

as-format asdot | no as-format

Syntax Description


no	Negate a command or set its defaults
as-format	Configure the router's Autonomous system number (ASN) notation
asdot	Specifies the Autonomous system number (ASN) notation to asdot format

Command Mode

/exec/configure

as-override

[ no | default ] as-override

Syntax Description


no	(Optional) Negate a command or set its defaults
default	(Optional) Inherit values from a peer template
as-override	Override matching AS-number while sending update

Command Mode

/exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af /exec/configure/router-bgp/router-bgp-vrf-neighbor/router-bgp-vrf-neighbor-af-ipv4 /exec/configure/router-bgp/router-bgp-vrf-neighbor/router-bgp-vrf-neighbor-af-ipv6 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-label /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-label /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-evpn

association-group

[no] association-group

Syntax Description


no	(Optional) Negate a command or set its defaults
association-group	Candidate path association group

Command Mode

/exec/configure/sr/te/color/cndpaths/pref/constraint

association-group

[no] association-group

Syntax Description


no	(Optional) Negate a command or set its defaults
association-group	Candidate path association group

Command Mode

/exec/configure/sr/te/pol/cndpaths/pref/constraint

attach console module

attach console module <module>

Syntax Description


attach	Connect to a specific linecard
console	Connect to the console
module	Connect to the module console
module	Enter module number

Command Mode

/exec

attach module

attach module <module>

Syntax Description


attach	Connect to a specific linecard
module	Module number of the linecard
module	Enter module number

Command Mode

/exec

attribute-group

[no] attribute-group <s0>

Syntax Description


no	(Optional) Negate a command or set its defaults
attribute-group	Attach attribute group
s0	Enter the name of attribute-group

Command Mode

/exec/configure/zoneset/zone

attribute-group

[no] attribute-group

Syntax Description


no	(Optional) Negate a command or set its defaults
attribute-group	Define attribute-group for default-zone

Command Mode

/exec/configure/default-zone

attribute-group

[no] attribute-group <s0>

Syntax Description


no	(Optional) Negate a command or set its defaults
attribute-group	Attach attribute group
s0	Enter the name of attribute-group

Command Mode

/exec/configure/zone

auth-mechanism plain

[no] auth-mechanism { plain }

Syntax Description


no	(Optional) Negate a command or set its defaults
auth-mechanism	Set the authentication mechanism
plain	Set the authentication mechanism as plain(default)

Command Mode

/exec/configure/ldap

authentication-check

[no] authentication-check

Syntax Description


no	(Optional) Negate a command or set its defaults
authentication-check	Check authentication on received LSP/CSNP/PSNP's

Command Mode

/exec/configure/l2mp-isis/l2mp-isis-vrf-common

authentication-check

[no] authentication-check

Syntax Description


no	(Optional) Negate a command or set its defaults
authentication-check	Check authentication on received LSP/CSNP/PSNP's

Command Mode

/exec/configure/otv-isis/otv-isis-vrf-common

authentication-check level-1

[no] authentication-check level-1

Syntax Description


no	(Optional) Negate a command or set its defaults
authentication-check	Check authentication on received LSP/CSNP/PSNP's
level-1	Specify authentication check for level-1 LSP, CSNP and PSNP

Command Mode

/exec/configure/router-isis/router-isis-vrf-common

authentication-check level-2

[no] authentication-check level-2

Syntax Description


no	(Optional) Negate a command or set its defaults
authentication-check	Check authentication on received LSP/CSNP/PSNP's
level-2	Specify authentication check for level-2 LSP, CSNP and PSNP

Command Mode

/exec/configure/router-isis/router-isis-vrf-common

authentication-key

{ { authentication-key <key> } | { no authentication-key [ <key> ] } }

Syntax Description


no	Negate a command or set its defaults
authentication-key	Configure the authentication key for the sham-link
key	Authentication key

Command Mode

/exec/configure/router-ospf/vrf/router-ospf-slink

authentication-key

{ { authentication-key <key> } | { no authentication-key [ <key> ] } }

Syntax Description


no	Negate a command or set its defaults
authentication-key	Configure the authentication key for the virtual-link
key	Authentication key

Command Mode

/exec/configure/router-ospf/router-ospf-vlink /exec/configure/router-ospf/vrf/router-ospf-vlink

authentication-key

{ [ no ] authentication-key <key> }

Syntax Description


no	(Optional) Negate a command or set its defaults
authentication-key	Authentication key used by LISP site
key	SHA-1 password

Command Mode

/exec/configure/lisp-site /exec/configure/vrf/lisp-site

authentication-type cleartext

{ authentication-type { cleartext | md5 } | no authentication-type [ { cleartext | md5 } ] }

Syntax Description


no	Negate a command or set its defaults
authentication-type	Set authentication type
cleartext	Cleartext
md5	HMAC-MD5

Command Mode

/exec/configure/l2mp-isis/l2mp-isis-vrf-common

authentication-type cleartext

{ authentication-type { cleartext | md5 } | no authentication-type [ { cleartext | md5 } ] }

Syntax Description


no	Negate a command or set its defaults
authentication-type	Set authentication type
cleartext	Cleartext
md5	HMAC-MD5

Command Mode

/exec/configure/otv-isis/otv-isis-vrf-common

authentication-type cleartext level-1

[no] authentication-type { cleartext | md5 } level-1

Syntax Description


no	(Optional) Negate a command or set its defaults
authentication-type	Set authentication type
cleartext	Cleartext
md5	HMAC-MD5
level-1	Specify authentication type for level-1 LSP, CSNP and PSNP

Command Mode

/exec/configure/router-isis/router-isis-vrf-common

authentication-type cleartext level-2

[no] authentication-type { cleartext | md5 } level-2

Syntax Description


no	(Optional) Negate a command or set its defaults
authentication-type	Set authentication type
cleartext	Cleartext
md5	HMAC-MD5
level-2	Specify authentication type for level-2 LSP, CSNP and PSNP

Command Mode

/exec/configure/router-isis/router-isis-vrf-common

authentication

authentication { [ text ] <secret> | md5 { key-chain <chain-name> | key-string [ 0 | 7 ] <key-name> [ compatibility ] [ timeout <sec> ] } } | no authentication

Syntax Description


no	Negate a command or set its defaults
authentication	Authentication
text	(Optional) Plain text authentication
secret	Plain text authentication string
md5	Use MD5 authentication
key-chain	Set key chain
chain-name	Name of key-chain
key-string	Set key string
0	(Optional) Specifies an UNENCRYPTED key string will follow
7	(Optional) Specifies a HIDDEN key string will follow
key-name	Key string (64 chars max)
compatibility	(Optional) Operate in compatibility mode for MD5 type-7 authentication
timeout	(Optional) Set timeout
sec	(Optional) (0-32767)Timeout until only accepting new key (seconds)

Command Mode

/exec/configure/if-eth-any/hsrp_ipv4 /exec/configure/if-eth-any/hsrp_ipv6

authentication

[no] authentication [ message-digest | null ]

Syntax Description


no	(Optional) Negate a command or set its defaults
authentication	Authentication on the vlink
message-digest	(Optional) Use message-digest authentication
null	(Optional) Use null(disable) authentication

Command Mode

/exec/configure/router-ospf/router-ospf-vlink /exec/configure/router-ospf/vrf/router-ospf-vlink

authentication

[no] authentication [ message-digest | null ]

Syntax Description


no	(Optional) Negate a command or set its defaults
authentication	Authentication on the slink
message-digest	(Optional) Use message-digest authentication
null	(Optional) Use null(disable) authentication

Command Mode

/exec/configure/router-ospf/vrf/router-ospf-slink

authentication bind

[no] authentication { bind-first [ append-with-basedn <s1> ] | compare [ password-attribute <s0> ] }

Syntax Description


no	(Optional) Negate a command or set its defaults
authentication	Set the authentication method
bind-first	Set the authentication method to bind-first
append-with-basedn	(Optional) Change the default value (cn=$userid)
s1	(Optional) append with dn value
compare	Change the default attribute
password-attribute	(Optional) Change the default password attribute (userPassword)
s0	(Optional) password attribute

Command Mode

/exec/configure/ldap

authentication disable ipsec spi md5 sha1 key-chain

{ [ no ] authentication { disable | ipsec spi <spi_id> { md5 <akey> | sha1 <akey> | key-chain <keychain_ah> } } } | { no authentication { disable | ipsec spi <spi_id> } }

Syntax Description


no

Bias-Free Language

Results

Chapter: A Commands

A Commands

aaa accounting dot1x default group

aaa authentication dot1x default group

aaa authentication login ascii-authentication

aaa authentication login console

aaa authentication login default

aaa authentication login default fallback error local

aaa authentication login enable

aaa authentication login error-enable

aaa authentication login invalid-username-log

aaa authentication rejected

aaa authentication rejected in ban

aaa authorization commands console

aaa authorization commands default

aaa authorization ssh default group

aaa bypass-user

aaa group server ldap

aaa group server radius

aaa group server tacacs

aaa server radius dynamic-author

aaa user default-role

abort

abort

abort

abort

abort

absolute-timeout

absolute-timer

absolute start

accept-lifetime

access-class

access-list

access-list ipv6

action

action

action cli

action collect

action counter name value op

action eem test

action event-default

action forceshut reset-reason

action overbudgetshut

action policy-default

action reload force

action snmp-trap

action syslog msg

activate mode-100M

active-query timer

additional-paths install backup

additional-paths receive

additional-paths selection route-map

additional-paths send

address-family ipv4

address-family ipv4 labeled-unicast

address-family ipv4 labeled-unicast

address-family ipv4 mdt

address-family ipv4 mdt

address-family ipv4 mvpn

address-family ipv4 mvpn

address-family ipv4 unicast

address-family ipv4 unicast

address-family ipv4 unicast

address-family ipv4 unicast

address-family ipv4 unicast

address-family ipv4 unicast

address-family ipv4 unicast

address-family ipv4 unicast

address-family ipv4 unicast

address-family ipv4 unicast

address-family ipv6 labeled-unicast

address-family ipv6 labeled-unicast

address-family ipv6 mvpn

address-family ipv6 mvpn

address-family ipv6 unicast

address-family ipv6 unicast

address-family ipv6 unicast