Cisco Nexus 9000 Series NX-OS Command Reference (Configuration Commands), Release 10.4(x)

cable-delay compensation

[no] cable-delay compensation <compens>

Syntax Description


no	(Optional) Negate a command or set its defaults
cable-delay	Cable-delay compensation configuration
compensation	Cable-delay compensation configuration
compens	Cable-delay compensation value, in nanoseconds

Command Mode

/exec/configure/gnss-if

cabundle

[no] cabundle <s0>

Syntax Description


no	(Optional) Negate a command or set its defaults
cabundle	Configure cabundle
s0	cabundle label

Command Mode

/exec/configure/trustpoint

cabundle url

[no] cabundle url <source_uri>

Syntax Description


no	(Optional) Negate a command or set its defaults
cabundle	Configure cabundle
url	Configure cabundle url
source_uri	Select source http URL

Command Mode

/exec/configure/trustpool

callhome

Syntax Description


callhome	Enter the callhome configuration mode

Command Mode

/exec/configure

callhome send configuration

Syntax Description


callhome	callhome commands
send	send a command callhome message
configuration	configuration type

Command Mode

/exec

callhome send diagnostic

Syntax Description


callhome	callhome commands
send	send a command callhome message
diagnostic	dignostic command

Command Mode

/exec

callhome test

Syntax Description


callhome	callhome commands
test	send a test callhome message

Command Mode

/exec

callhome test inventory

Syntax Description


callhome	callhome commands
test	send a test callhome message
inventory	send a dummy callhome inventory

Command Mode

/exec

candidate-paths

[no] candidate-paths

Syntax Description


no	(Optional) Negate a command or set its defaults
candidate-paths	Enter candidate-paths

Command Mode

/exec/configure/sr/te/color

candidate-paths

[no] candidate-paths

Syntax Description


no	(Optional) Negate a command or set its defaults
candidate-paths	Enter candidate-paths

Command Mode

/exec/configure/sr/te/pol

capability additional-paths receive

[ no | default ] capability additional-paths receive [ disable ]

Syntax Description


no	(Optional) Negate a command or set its defaults
default	(Optional) Inherit values from a peer template
capability	Advertise capability to the peer
additional-paths	Additional paths capability
receive	Additional paths Receive capability
disable	(Optional) Do not advertise additional paths Receive capability

Command Mode

/exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-label /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-label /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv4 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv6 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mvpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-mvpn

capability additional-paths send

[ no | default ] capability additional-paths send [ disable ]

Syntax Description


no	(Optional) Negate a command or set its defaults
default	(Optional) Inherit values from a peer template
capability	Advertise capability to the peer
additional-paths	Additional paths capability
send	Additional paths Send capability
disable	(Optional) Do not advertise additional paths Send capability

Command Mode

/exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv4 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv6 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mvpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-mvpn

capability suppress 4-byte-as

[ no | default ] capability suppress 4-byte-as

Syntax Description


no	(Optional) Negate a command or set its defaults
default	(Optional) Inherit values from a peer template
capability	Capability
suppress	Suppress sending out capability
4-byte-as	Suppress 4-byte AS Capability

Command Mode

/exec/configure/router-bgp/router-bgp-neighbor-sess

capability vrf-lite

[no] capability vrf-lite [ evpn ]

Syntax Description


no	(Optional) Negate a command or set its defaults
capability	Capability
vrf-lite	Enable VRF-lite support
evpn	(Optional) Ethernet VPN

Command Mode

/exec/configure/router-ospf/vrf

capture

[no] capture { latency exceeding-threshold <time> { micro-sec | milli-sec } }

Syntax Description


capture	Events to be logged
latency	Latency
exceeding-threshold	Latency threshold limit
time	time range
micro-sec	time in micro seconds
milli-sec	time in milli seconds

Command Mode

/exec/configure/nfm-event/group-latency-events

capture

[no] capture { latency exceeding-threshold <time> { micro-sec | milli-sec } }

Syntax Description


capture	Events to be logged
latency	Latency
exceeding-threshold	Latency threshold limit
time	time range <0-65535>
micro-sec	time in micro seconds
milli-sec	time in milli seconds

Command Mode

/exec/configure/config-fte-event/group-latency-events

capture

[no] capture { latency exceeding-threshold <time> { micro-sec | milli-sec } }

Syntax Description


capture	Events to be logged
latency	Latency
exceeding-threshold	Latency threshold limit
time	time range
micro-sec	time in micro seconds
milli-sec	time in milli seconds

Command Mode

/exec/configure/analytics/event-latency-events

capture rcv

[no] capture { rcv-window-zero | ip-df }

Syntax Description


capture	Events to be logged
rcv-window-zero	TCP Recieve Window Zero
ip-df	IP Don't Fragment Flag

Command Mode

/exec/configure/analytics/event-packet-events

capture rcv

[no] capture { rcv-window-zero | ip-df }

Syntax Description


capture	Events to be logged
rcv-window-zero	TCP Recieve Window Zero
ip-df	IP Don't Fragment Flag

Command Mode

/exec/configure/nfm-event/group-packet-events

capture session

[no] capture session <session-id>

Syntax Description


no	(Optional) Negate a command or set its defaults
capture	Enable packet capture on this filter for session
session	Session ID <1-48> for this session
session-id	Session ID <1-48> for this session

Command Mode

/exec/configure/ipacl /exec/configure/ipv6acl /exec/configure/macacl /exec/configure/arpacl

carrier-delay

carrier-delay { <sec_val> | msec <msec_val> } | no carrier-delay

Syntax Description


no	Negate a command or set its defaults
carrier-delay	Specify delay for interface transitions
sec_val	Carrier Transitions delay seconds
msec	Carrier Transitions delay milliseconds
msec_val	Carrier Transitions delay milliseconds

Command Mode

/exec/configure/if-vlan-common

cd

cd <uri0>

Syntax Description


cd	Change current directory
uri0	Enter the name of the directory

Command Mode

/exec

cdp advertise v1

cdp advertise { v1 | v2 } | no cdp advertise [ v1 | v2 ]

Syntax Description


no	Negate a command or set its defaults
cdp	Configure CDP parameters
advertise	Highest CDP version supported on the switch
v1	CDP Version 1
v2	CDP Version 2

Command Mode

/exec/configure

cdp enable

[no] cdp enable

Syntax Description


no	(Optional) Negate a command or set its defaults
cdp	Configure CDP interface parameters
enable	Enable/disable CDP on the interface

Command Mode

/exec/configure/if-ethernet-all /exec/configure/if-gig-ether-all /exec/configure/if-gig-ether /exec/configure/if-eth-base /exec/configure/if-mgmt-ether /exec/configure/if-vethernet /exec/configure/if-veth /exec/configure/if-veth-any /exec/configure/if-veth-all

cdp enable

[no] cdp enable

Syntax Description


no	(Optional) Negate a command or set its defaults
cdp	Configure CDP interface parameters
enable	Enable/disable CDP on all interfaces

Command Mode

/exec/configure

cdp format device-id

[no] cdp format device-id { mac-address | serial-number | system-name }

Syntax Description


no	(Optional) Negate a command or set its defaults
cdp	Configure CDP parameters
format	Device ID format for CDP
device-id	Device ID format for CDP
mac-address	Mac-address of the Chassis
serial-number	Chassis Serial Number/OUI
system-name	System name/Fully Qualified Domain Name (Default)

Command Mode

/exec/configure

cdp holdtime

[no] cdp holdtime <i0>

Syntax Description


no	(Optional) Negate a command or set its defaults
cdp	Configure CDP parameters
holdtime	CDP hold time advertised (in seconds)
i0	CDP hold time advertised (in seconds)

Command Mode

/exec/configure

cdp timer

[no] cdp timer <i1>

Syntax Description


no	(Optional) Negate a command or set its defaults
cdp	Configure CDP parameters
timer	CDP refresh time interval (in seconds)
i1	CDP refresh time interval (in seconds)

Command Mode

/exec/configure

certificate

certificate <file-name> <host-name> | no certificate

Syntax Description


no	Negate a command or set its defaults
certificate	Specify certificate
file-name	.pem certificate filename
host-name	hostname associated with certificate

Command Mode

/exec/configure/telemetry/destination-group

certificate

certificate { { trustpoint <trustpoint-label> } | { <file-name> } } <host-name> | no certificate

Syntax Description


no	Negate a command or set its defaults
certificate	Specify certificate
trustpoint	certificate trustpoint
trustpoint-label	trustpoint label name
file-name	.pem certificate filename
host-name	hostname associated with certificate

Command Mode

/exec/configure/telemetry

certificate trustpoint

certificate trustpoint <trustpoint-label> [ <host-name> ] | no certificate

Syntax Description


no	Negate a command or set its defaults
certificate	Specify certificate
trustpoint	Specify trustpoint
trustpoint-label	trustpoint label name
host-name	(Optional) trustpoint label name

Command Mode

/exec/configure/telemetry/destination-group/host

cfs debug all

Syntax Description


cfs	CFS parameters
debug	Internal command for debugs
all	Internal command for debugs

Command Mode

/exec

cfs distribute

[no] cfs distribute

Syntax Description


no	(Optional) Negate a command or set its defaults
distribute	Enable fabric wide distribution

Command Mode

/exec/configure

cfs eth distribute

[no] cfs eth distribute

Syntax Description


no	(Optional) Negate a command or set its defaults
eth	ETH configurations
distribute	Enable CFS distribution over Ethernet

Command Mode

/exec/configure

cfs ipv4 distribute

[no] cfs ipv4 distribute

Syntax Description


no	(Optional) Negate a command or set its defaults
ipv4	IPv4 configurations
distribute	Enable CFS distribution over IPv4

Command Mode

/exec/configure

cfs ipv4 mcast-address

{ cfs ipv4 mcast-address <ip0> | no cfs ipv4 mcast-address [ <ip0> ] }

Syntax Description


no	Negate a command or set its defaults
ipv4	IPv4 configurations
mcast-address	Configure IPv4 multicast address
ip0	Admin scope [239.255/16, 239.192/16-239.251/16]

Command Mode

/exec/configure

cfs ipv6 distribute

[no] cfs ipv6 distribute

Syntax Description


no	(Optional) Negate a command or set its defaults
ipv6	IPv6 configurations
distribute	Enable CFS distribution over IPv6

Command Mode

/exec/configure

cfs ipv6 mcast-address

{ cfs ipv6 mcast-address <ipv60> | no cfs ipv6 mcast-address [ <ipv60> ] }

Syntax Description


no	Negate a command or set its defaults
ipv6	IPv6 configurations
mcast-address	Configure IPv6 multicast address

Command Mode

/exec/configure

cfs refresh static-peers

Syntax Description


cfs	CFS parameters
refresh	Internal command for static peers
static-peers	Internal command for static peers

Command Mode

/exec

cfs region

[no] cfs region <i0>

Syntax Description


no	(Optional) Negate a command or set its defaults
region	Regions to limit the distribution scope of application(s)
i0	Region Id

Command Mode

/exec/configure

cfs static-peers

[no] cfs static-peers

Syntax Description


no	(Optional) Negate a command or set its defaults
static-peers	Enable Static peers configuration mode

Command Mode

/exec/configure

change-password

change-password [ old-password <s1> new-password <s2> ]

Syntax Description


change-password	Change your password
old-password	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED
s1	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED
new-password	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED
s2	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

Command Mode

/exec

channel-group

[no] channel-group

Syntax Description


no	Negate a command or set its defaults
channel-group	Configure port channel parameters

Command Mode

/exec/configure/if-eth-base /exec/configure/if-ethernet-all

channel-group

channel-group <channel-id> [ mode { active | passive | on } ]

Syntax Description


channel-group	Configure port channel parameters
mode	(Optional) Specify channeling mode
active	(Optional) Set channeling mode to ACTIVE
passive	(Optional) Set channeling mode to PASSIVE
on	(Optional) Set channeling mode to ON
channel-id	Specify a port-channel number

Command Mode

/exec/configure/if-eth-base /exec/configure/if-ethernet-all

channel-group

[no] channel-group [ <channel-id> [ mode { active | passive | on } ] ]

Syntax Description


no	Negate a command or set its defaults
channel-group	Configure port channel parameters
mode	(Optional) Specify channeling mode
active	(Optional) Set channeling mode to ACTIVE
passive	(Optional) Set channeling mode to PASSIVE
on	(Optional) Set channeling mode to ON
channel-id	(Optional) Specify a port-channel number

Command Mode

/exec/configure/if-eth-base /exec/configure/if-ethernet-all

channel-group

channel-group <channel-id> | no channel-group

Syntax Description


no	Negate a command or set its defaults
channel-group	add to/remove from a port-channel
channel-id	Specify a port-channel number

Command Mode

/exec/configure/if-fc /exec/configure/if-bay /exec/configure/if-ext /exec/configure/if-gig-ether /exec/configure/if-fcip

channel-group auto

channel-group auto | no channel-group auto

Syntax Description


no	Negate a command or set its defaults
channel-group	add to/remove from a san-port-channel
auto	Enable Auto Creation of Port Channel

Command Mode

/exec/configure/if-fc /exec/configure/if-gig-ether /exec/configure/if-fcip

channel-group force

channel-group <channel-id> force

Syntax Description


channel-group	add to/remove from a san-port-channel
channel-id	Specify a san-port-channel number
force	Forcefully add a port

Command Mode

/exec/configure/if-fc /exec/configure/if-gig-ether /exec/configure/if-fcip

channel-group force

channel-group <channel-id> force [ mode { active | passive | on } ] | no channel-group <channel-id> force [ mode { active | passive | on } ]

Syntax Description


no	Negate a command or set its defaults
channel-group	add to/remove from a port-channel
channel-id	Specify a port-channel number
force	Forcefully add a port
mode	(Optional) Specify channeling mode
active	(Optional) Set channeling mode to ACTIVE
passive	(Optional) Set channeling mode to PASSIVE
on	(Optional) Set channeling mode to ON

Command Mode

/exec/configure/if-eth-base /exec/configure/if-ethernet-all

channel mode active

channel mode active | no channel mode active

Syntax Description


no	Negate a command or set its defaults
channel	Set the channel mode for the san-port-channel interface
mode	Set the channel mode for the san-port-channel interface
active	configure ACTIVE san-port-channel

Command Mode

/exec/configure/if-san-port-channel

chassis associate chassis-serial module-serial port-profile module-side left

chassis associate <chassis_no> chassis-serial <serial_no> module-serial <mod_serial> port-profile <profile_name> module-side { left | right } | no chassis associate [ <chassis_no> ]

Syntax Description


no	Negate a command or set its defaults
chassis	Configure chassis
associate	Associate the port to a Chassis
chassis_no	Chassis number
chassis-serial	Chassis serial number
serial_no	Serial number
module-serial	Module serial number
mod_serial	Module serial number
port-profile	Port profile for mgmt vnic
profile_name	Profile name
module-side	Module Side
left	Left IO module slot
right	Right IO module slot

Command Mode

/exec/configure/if-eth-l2-non-member /exec/configure/if-eth-port-channel-switch

chassis management-instance fabric

chassis management-instance <inst> fabric <fabric_no> | no chassis management-instance

Syntax Description


no	Negate a command or set its defaults
chassis	Chassis configuration
management-instance	Management instance configuration
inst	Management Instance
fabric	Left fabric or Right fabric
fabric_no	Fabric number

Command Mode

/exec/configure

checkpoint

[no] checkpoint <chkpoint_name>

Syntax Description


no	Negate a command or set its defaults
checkpoint	Delete configuration rollback checkpoint
chkpoint_name	Checkpoint name

Command Mode

/exec

checkpoint

checkpoint { [ <name> ] [ description <descr_str> ] | file <file_uri> }

Syntax Description


checkpoint	Create configuration rollback checkpoint
name	(Optional) Checkpoint name
file	Create configuration rollback checkpoint to file
file_uri	Checkpoint file path
description	(Optional) checkpoint description for the given checkpoint
descr_str	(Optional) checkpoint description(can include spaces)

Command Mode

/exec

cipher-suite

[no] cipher-suite <suite>

Syntax Description


cipher-suite	Configure Cipher Suite
suite	Cipher Suite options

Command Mode

/exec/configure/tunenc-policy

cipher-suite

[no] cipher-suite { { enforce-peer <allowed-peer-cipher-suite1> [ <allowed-peer-cipher-suite2> [ <allowed-peer-cipher-suite3> [ <allowed-peer-cipher-suite4> ] ] ] } | <suite> }

Syntax Description


cipher-suite	Configure Cipher Suite
enforce-peer	Configure Enforce Peer
allowed-peer-cipher-suite1	Peer Cipher Suite option1
allowed-peer-cipher-suite2	(Optional) Peer Cipher Suite option2
allowed-peer-cipher-suite3	(Optional) Peer Cipher Suite option3
allowed-peer-cipher-suite4	(Optional) Peer Cipher Suite option4
suite	Cipher Suite options

Command Mode

/exec/configure/macsec-policy

class-map

[no] class-map [ type qos ] [ <any_or_all> ] <cmap-name>

Syntax Description


no	(Optional) Negate a command or set its defaults
class-map	Configure a class map
type	(Optional) Specify the type of this class-map
qos	(Optional) Qos class
any_or_all	(Optional) Enter match-any or match-all
cmap-name	class-map name

Command Mode

/exec/configure

class-map type control-plane

[no] class-map type control-plane [ <opt_any_or_all> ] <cmap-name>

Syntax Description


no	(Optional) Negate a command or set its defaults
class-map	Configure a class map
type	Specify the type of this class-map
control-plane	Control-Plane
opt_any_or_all	(Optional) Enter match-any or match-all
cmap-name	Class-map name

Command Mode

/exec/configure

class-map type network-qos

[no] class-map type network-qos [ match-any ] <cmap-name-nq>

Syntax Description


no	(Optional) Negate a command or set its defaults
class-map	Configure a class map
type	Specify the type of this class-map
network-qos	Network QoS class
match-any	(Optional) Match on any criteria
cmap-name-nq	class-map name

Command Mode

/exec/configure

class-map type queuing

[no] class-map type queuing [ <any_or_all> ] { xxx <cmap-enum-name> | <cmap-dce-name> | zzz <cmap-name-hque> }

Syntax Description


no	(Optional) Negate a command or set its defaults
class-map	Configure a class map
type	Specify the type of this class-map
queuing	Queuing class
any_or_all	(Optional) Enter match-any
cmap-enum-name
xxx	xxx
zzz	zzz
cmap-dce-name	Queuing class-map name
cmap-name-hque	Hierarchical class-map name

Command Mode

/exec/configure

class-map type queuing

[no] class-map type queuing { <cmap-dce-name> }

Syntax Description


no	(Optional) Negate a command or set its defaults
class-map	Configure a class map
type	Specify the type of this class-map
queuing	Queuing class
cmap-dce-name	Queuing class-map name

Command Mode

/exec/configure

class

class { <cmap-name> [ insert-before <cmap-name2> ] | class-default } | no class { <cmap-name> | class-default }

Syntax Description


no	Negate a command or set its defaults
class	Attach class map to policy map
cmap-name	Class-map name
insert-before	(Optional) Insert this class before another class
cmap-name2	(Optional) class map name before which insertion should happen
class-default	Use class default

Command Mode

/exec/configure/pmap

class

[no] class [ type qos ] <cmap-name> [ insert-before [ type qos1 ] <cmap-name2> ]

Syntax Description


no	(Optional) Negate a command or set its defaults
class	Policy Criteria
type	(Optional) Specify the type of class
qos	(Optional) Match on Qos class
cmap-name	class map name
insert-before	(Optional) Insert this class before another class
qos1	(Optional) Insert before Qos class
cmap-name2	(Optional) class map name

Command Mode

/exec/configure/policy-map

class inline

[no] class __inline__ [ type psp ] <cmap-name-plc> [ insert-before <cmap-name2> ]

Syntax Description


no	(Optional) Negate a command or set its defaults
class	Policy Criteria
__inline__	Inline Class
type	(Optional) Specify the type of class
psp	(Optional) Match on PSP class
cmap-name-plc	class map name
insert-before	(Optional) Insert this class before another class
cmap-name2	(Optional) class map name

Command Mode

/exec/configure/policy-map/type/plc

class class-default

[no] class class-default

Syntax Description


no	(Optional) Negate a command or set its defaults
class	Policy Criteria
class-default	System default class matching otherwise unclassified packets

Command Mode

/exec/configure/policy-map

class type network-qos

[no] class type network-qos <cmap-name-nq>

Syntax Description


no	(Optional) Negate a command or set its defaults
class	Match on network-qos class-map
type	Specify the type of this class-map
network-qos	Network QoS policy
cmap-name-nq	Match class-map name

Command Mode

/exec/configure/policy-map/type/uf

class type network-qos class-default

[no] class type network-qos class-default

Syntax Description


no	(Optional) Negate a command or set its defaults
class	Match on network-qos class-map
type	Specify the type of this class-map
network-qos	Network QoS policy
class-default	System default class matching otherwise not classified cos values

Command Mode

/exec/configure/policy-map/type/uf

class type psp

[no] class type psp { <cmap-name-plc> | { handle1 <ppf_id1> } } [ insert-before { <cmap-name2> | { handle2 <ppf_id2> } } ]

Syntax Description


no	(Optional) Negate a command or set its defaults
class	Policy Criteria
type	Specify the type of class
psp	Match on PSP class
cmap-name-plc	class map name
handle1	Handle1
ppf_id1	PPF ID1
insert-before	(Optional) Insert this class before another class
cmap-name2	(Optional) class map name
handle2	(Optional) Handle2
ppf_id2	(Optional) PPF ID2

Command Mode

/exec/configure/policy-map/type/plc

class type queuing

[no] class type queuing { xxx <cmap-enum-name> | <cmap-dce-name> | zzz <cmap-name-hque> } [ insert-before type queuing1 yyy <xcmap-enum-name> ]

Syntax Description


xxx	xxx
yyy	(Optional) yyy
zzz	zzz
no	(Optional) Negate a command or set its defaults
class	Policy Criteria
type	Specify the type of class
queuing	Match on Queuing class
cmap-enum-name
cmap-dce-name	Queuing class-map name
cmap-name-hque	Hierarchical class-map name
insert-before	(Optional) Insert this class before another class
queuing1	(Optional) Insert before Queuing class
xcmap-enum-name	(Optional)

Command Mode

/exec/configure/policy-map/type/queuing

clear

clear { { ip route [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] } | { routing [ vrf { <vrf-name> | <vrf-known-name> } ] [ ip | ipv4 ] [ unicast ] [ topology <topology-name> ] } } { <all> | { { <ip-addr> | <ip-prefix> } [ { [ <nh-addr> | <nh-addr-v6> ] [ <nh-interface> ] } | { <nh-label> } ] } } [ no-ufdm ]

Syntax Description


clear	Reset functions
route	Clear routing information
routing	Clear routing information
vrf	(Optional) Clear per-VRF information
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
vrf-all	(Optional) Display information for all VRFs
ip	Clear IP commands
ipv4	(Optional) Clear IP commands
unicast	(Optional) Clear unicast information
topology	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED
topology-name	(Optional) Topology name
all	Clear all routes
ip-addr	Clear single host route
ip-prefix	Clear single exact match route
nh-addr	(Optional) Clear single path
nh-label	(Optional) Clear single binding label path
nh-interface	(Optional) Interface Name
no-ufdm	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

Command Mode

/exec

clear

clear { { ipv6 route [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] } | { routing [ vrf { <vrf-name> | <vrf-known-name> } ] ipv6 [ unicast ] [ topology <topology-name> ] } } { <all> | { { <ipv6-addr> | <ipv6-prefix> } [ { [ <nh-addr> ] [ <nh-interface> ] } | { <nh-label> } ] } } [ no-ufdm ]

Syntax Description


clear	Reset functions
route	Clear routing information
routing	Clear routing information
vrf	(Optional) Clear per-VRF information
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
vrf-all	(Optional) Display information for all VRFs
ipv6	Clear IPv6 commands
unicast	(Optional) Clear unicast information
topology	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED
topology-name	(Optional) Topology name
all	Clear all routes
nh-label	(Optional) Clear single binding label path
nh-interface	(Optional) Interface Name
no-ufdm	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

Command Mode

/exec

clear

clear { { ip eigrp [ <eigrp-ptag> ] neighbors { * | <address> | <interface> } [ soft ] [ no-goodbye ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] } | { ipv6 eigrp [ <eigrp-ptag> ] neighbors { * | <ipv6-addr> | <interface> } [ soft ] [ no-goodbye ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] } }

Syntax Description


clear	Reset functions
ip	Clear IP commands
ipv6	Clear IPv6 commands
eigrp	EIGRP clear commands
vrf	(Optional) Display per-VRF information
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
all	(Optional) Display information for all VRFs
eigrp-ptag	(Optional) Process tag
neighbors	Clear EIGRP neighbors
*	Clear all EIGRP neighbors
address	IP-EIGRP neighbor address
interface	Interface
soft	(Optional) Soft reset
no-goodbye	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED
eigrp-ptag	(Optional)

Command Mode

/exec

clear

clear { access-list counters [ <acl-ip-ipv6-mac-name> ] | ip access-list counters [ <acl-ip-name> ] | ipv6 access-list counters [ <acl-ipv6-name> ] | mac access-list counters [ <acl-mac-name> ] }

Syntax Description


clear	Reset functions
acl-ip-ipv6-mac-name	(Optional) List name
ip	Display IP information
ipv6	Display IPv6 information
mac	MAC configuration commands
access-list	Clear access list statistical information
counters	Clear access list counters
acl-ip-name	(Optional) List name
acl-ipv6-name	(Optional) List name
acl-mac-name	(Optional) List name

Command Mode

/exec

clear aaa client radius statistics

clear aaa client radius statistics <hostipname>

Syntax Description


clear	Reset functions
aaa	clear aaa information
client	clear AAA client info
radius	clear radius dynamic authorization client info
statistics	clear radius dynamic authorization client statistics
hostipname	IPV4/IPV6 address or DNS name of RADIUS client

Command Mode

/exec

clear aaa local user blocked username

clear aaa local user blocked { username <s0> | all }

Syntax Description


clear	Reset functions
aaa	Configure aaa functions
local	Local username
user	Local system user
blocked	Clear blocked user
username	Blocked username
s0	Enter the username
all	Clear all the blocked users

Command Mode

/exec

clear aaa server radius statistics

Syntax Description


clear	Reset functions
aaa	clear aaa information
server	clear Local AAA server info
radius	clear local radius server info
statistics	clear local radius server statistics

Command Mode

/exec

clear aaa user blocked username

clear aaa user blocked { username <s0> | all }

Syntax Description


clear	Reset functions
aaa	Configure aaa functions
user	system user to clear
blocked	Clear blocked user
username	Blocked username
s0	Enter the username
all	Clear all the blocked users

Command Mode

/exec

clear access-list dest-miss stats

clear access-list dest-miss stats [ module <module> ]

Syntax Description


clear	Reset functions
access-list	Access Control List
dest-miss	destination-miss info
stats	Clear Statistics for Hardware destination-miss
module	(Optional) Slot/Module
module	(Optional) Slot/module number

Command Mode

/exec

clear access-list hardware counters

clear access-list hardware counters [ module <module> ]

Syntax Description


clear	Reset functions
access-list	Clear access list statistical information
hardware	hardware information
counters	Clear access list counters
module	(Optional) Slot/module
module	(Optional) Slot/module number

Command Mode

/exec

clear access-list ipsg stats

clear access-list ipsg stats [ module <module> ] [ instance <instance_number> ]

Syntax Description


clear	Reset functions
access-list	access-list
ipsg	ipsg
stats	Clear Statistics of IPSG drop entries
module	(Optional) Slot/module
module	(Optional) Slot/module number
instance	(Optional) ASIC Instance Number
instance_number	(Optional) ASIC Instance Number in Decimal

Command Mode

/exec

clear accounting log

Syntax Description


clear	Reset functions
accounting	Clear accounting log(s) in all vdcs
log	Clear the accounting log(s) in all vdcs

Command Mode

/exec

clear aclqos cl-qos

Syntax Description


clear	Reset functions
aclqos	Configure aclqos debug
cl-qos	cl-qos logs of ACLQOS

Command Mode

/exec

clear aclqos fab

Syntax Description


clear	Reset functions
aclqos	Configure aclqos debug
fab	Fabric logs of ACLQOS

Command Mode

/exec

clear aclqos fc

Syntax Description


clear	Reset functions
aclqos	Configure aclqos debug
fc	fc logs of ACLQOS

Command Mode

/exec

clear aclqos libdrv

Syntax Description


clear	Reset functions
aclqos	Configure aclqos debug
libdrv	libdrv logs of ACLQOS

Command Mode

/exec

clear aclqos map

Syntax Description


clear	Reset functions
aclqos	Configure aclqos debug
map	map logs of ACLQOS

Command Mode

/exec

clear aclqos merge

Syntax Description


clear	Reset functions
aclqos	Configure aclqos debug
merge	merge logs of ACLQOS

Command Mode

/exec

clear aclqos pl

Syntax Description


clear	Reset functions
aclqos	Configure aclqos debug
pl	pl logs of ACLQOS

Command Mode

/exec

clear aclqos ppf-parse

Syntax Description


clear	Reset functions
aclqos	Configure aclqos debug
ppf-parse	ppf-parse logs of ACLQOS

Command Mode

/exec

clear aclqos ppf

Syntax Description


clear	Reset functions
aclqos	Configure aclqos debug
ppf	ppf logs of ACLQOS

Command Mode

/exec

clear aclqos qng-hw

Syntax Description


clear	Reset functions
aclqos	Configure aclqos debug
qng-hw	Qng logs of ACLQOS

Command Mode

/exec

clear aclqos qng

Syntax Description


clear	Reset functions
aclqos	Configure aclqos debug
qng	Qng logs of ACLQOS

Command Mode

/exec

clear aclqos rl

Syntax Description


clear	Reset functions
aclqos	Configure aclqos debug
rl	RL logs of ACLQOS

Command Mode

/exec

clear aclqos rm

Syntax Description


clear	Reset functions
aclqos	Configure aclqos debug
rm	RM logs of ACLQOS

Command Mode

/exec

clear aclqos sch

Syntax Description


clear	Reset functions
aclqos	Configure aclqos debug
sch	Sch logs of ACLQOS

Command Mode

/exec

clear aclqos stats

Syntax Description


clear	Reset functions
aclqos	Configure aclqos debug
stats	stats logs of ACLQOS

Command Mode

/exec

clear aclqos tbl

Syntax Description


clear	Reset functions
aclqos	Configure aclqos debug
tbl	tbl logs of ACLQOS

Command Mode

/exec

clear aclqos trace-detail

Syntax Description


clear	Reset functions
aclqos	Configure aclqos debug
trace-detail	detail logs of ACLQOS

Command Mode

/exec

clear aclqos trace

Syntax Description


clear	Reset functions
aclqos	Configure aclqos debug
trace	trace logs of ACLQOS

Command Mode

/exec

clear aclqos uf

Syntax Description


clear	Reset functions
aclqos	Configure aclqos debug
uf	UF logs of ACLQOS

Command Mode

/exec

clear bfd statistics

Syntax Description


clear	Clear
bfd	bfd
statistics	statistics

Command Mode

/exec

clear bgp

clear bgp { ipv4 { unicast | multicast } policy statistics { { redistribute [ { { eigrp | isis | ospf | rip } <tag> } | static | direct | amt | lisp | hmm | am ] } | { neighbor <neighbor-id> [ default-originate | { route-map | filter-list | prefix-list } { in | out } ] } | { dampening } | { network { <ip-addr> mask <ip-mask> | <ip-prefix> } } | { aggregate-address { <ip-addr> <ip-mask> | <ip-prefix> } { suppress-map | advertise-map } } } | { vpnv4 | vpnv6 } unicast policy statistics { neighbor <neighbor-id> [ { route-map | filter-list | prefix-list } { in | out } ] } | ipv6 { unicast | multicast } policy statistics { { redistribute [ { { eigrp | isis | ospfv3 | rip } <tag> } | static | direct | amt | lisp | hmm | am ] } | { neighbor { <neighbor-id> | <ipv6-neighbor-id> } [ default-originate | { route-map | filter-list | prefix-list } { in | out } ] } | { dampening } | { network <ipv6-prefix> } | { aggregate-address <ipv6-prefix> { suppress-map | advertise-map } } } }

Syntax Description


clear	Reset functions
ipv4	Clear IPv4 address-family
ipv6	Clear IPv6 address-family
vpnv4	Clear VPNv4 address-family
vpnv6	Clear VPNv6 address-family
bgp	Clear BGP sessions
unicast	Clear unicast address-family
multicast	Clear multicast address-family
policy	Clear policy related information
statistics	Clear Route Filter statistics
redistribute	Statistics for redistribution
isis	(Optional) ISO IS-IS
ospf	(Optional) Open Shortest Path First (OSPF)
ospfv3	(Optional) Open Shortest Path First v3
rip	(Optional) Routing Information Protocol
eigrp	(Optional) Enhanced Interior Gateway Protocol
static	(Optional) Static routes
direct	(Optional) Directly connected
amt	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED
lisp	(Optional) LISP EID-prefixes in the non-default VRF
hmm	(Optional) HMM prefix
am	(Optional) AM routes (learned via ARP)
tag	(Optional) Source protocol tag
neighbor	Clear neighbor specific counters
neighbor-id	Neighbor IPv4 address
route-map	(Optional) Neighbor route-map
prefix-list	(Optional) Neighbor prefix-list
filter-list	(Optional) Neighbor filter-list
out	(Optional) Outbound policy
in	(Optional) Inbound policy
default-originate	(Optional) Default-originate policy
dampening	Clear dampening info
network	Configured IP prefix to advertise
aggregate-address	Configured BGP aggregate prefixes
suppress-map	Statistics of suppress policy
advertise-map	Statistics of advertise policy
ip-addr	IP network advertised
mask	Configured mask of the IP prefix advertised
ip-mask	Dotted 4-octet mask
ip-prefix	IP prefix in CIDR format

Command Mode

/exec

clear bgp bmp stats server

clear bgp bmp stats server { <server-id> | all }

Syntax Description


clear	Reset functions
bgp	Clear BGP sessions
bmp	Clear BMP
stats	Server Stats
server	BMP Server
server-id	Server ID
all	All BMP Servers

Command Mode

/exec

clear bgp rpki cache

clear bgp rpki cache *

Syntax Description


clear	Reset functions
bgp	Clear BGP sessions
rpki	Clear RPKI
cache	RPKI Cache
*	Clear all caches (Should be a * character)

Command Mode

/exec

clear bootflash

Syntax Description


clear	Format disks
bootflash	Clear bootflash

Command Mode

/exec

clear bootvar log

Syntax Description


clear	Reset functions
bootvar	Clear the bootvar log
log	Clear the bootvar log

Command Mode

/exec

clear cdp counters

clear cdp { counters [ interface <if0> ] | table [ interface1 <if1> ] }

Syntax Description


clear	Reset functions
cdp	Cisco Discovery Protocol
counters	Clear CDP counters on all interfaces
interface	(Optional) Clear CDP counters on an interface
if0	(Optional)
table	Clear CDP cache on all interfaces
interface1	(Optional) Clear CDP cache on an interface
if1	(Optional)

Command Mode

/exec

clear checkpoint database

clear checkpoint database [ user | system ]

Syntax Description


clear	Reset functions
checkpoint	Clear configuration rollback checkpoint
database	Clear configuration rollback checkpoint database
user	(Optional) Clear configuration rollback checkpoint database for user checkpoints
system	(Optional) Clear configuration rollback checkpoint database for system checkpoints

Command Mode

/exec

clear cli history

Syntax Description


clear	Reset functions
cli	debug cli
history	history of cli commands

Command Mode

/exec

clear configuration

Syntax Description


clear	Reset functions
configuration	session configuration

Command Mode

/exec/configure

clear configuration commits oldest

clear configuration commits { oldest <s0> | diskspace <s1> }

Syntax Description


clear	Reset functions
configuration	session configuration
commits	Delete commits from the commit database
oldest	Delete oldest <n> rollback points
s0	Number of rollback points to delete
diskspace	Free up specified amount of disk space
s1	Number of Kilo Bytes of disk space to free

Command Mode

/exec

clear controller accounting log

clear controller <ctrl-id> accounting log

Syntax Description


clear	Show running system information
controller	Controller command
ctrl-id	Controller id value
accounting	Accounting
log	Clear log information

Command Mode

/exec

clear copp statistics

Syntax Description


clear	Reset functions
copp	Clear policy information for copp
statistics	Clear statistics

Command Mode

/exec

clear cores

Syntax Description


clear	Reset functions
cores	clear all core dumps for the switch

Command Mode

/exec

clear cores archive

clear cores archive [ file <s0> ]

Syntax Description


clear	Reset functions
cores	clear all cores for this vdc
archive	clear all core dump files for this vdc from logflash on this module
file	(Optional) delete a core file on logflash
s0	(Optional) Name of file in directory 'core

Command Mode

/exec

clear counters

Syntax Description


clear	Reset functions
counters	Clear counters

Command Mode

/exec

clear counters buffers

clear counters buffers [ module <module> [ instance <instance> ] ] [ __readonly__ <clear_valid> ]

Syntax Description


clear	Reset functions
counters	Clear counters
buffers	Clear system buffer max cell usage counter
module	(Optional) Slot/module
module	(Optional) Slot/module number
instance	(Optional) ASIC Instance Number
instance	(Optional) ASIC Instance Number in Decimal
__readonly__	(Optional) Read Only
clear_valid	(Optional) Clear

Command Mode

/exec

clear counters interface

clear counters interface <ifindex>

Syntax Description


clear	Reset functions
counters	Clear counters
interface	Clear interface counters
ifindex	Clear interface counters

Command Mode

/exec

clear counters interface

clear counters interface <ifindex1> [ snmp ]

Syntax Description


clear	Reset functions
counters	Clear counters
interface	Clear interface counters
ifindex1	Clear interface counters
snmp	(Optional) Clear snmp interface counters

Command Mode

/exec

clear counters interface all

Syntax Description


clear	Reset functions
counters	Clear counters
interface	Clear interface counters
all	Clear all interface counters

Command Mode

/exec

clear counters interface snmp

clear counters interface <ifindex> snmp

Syntax Description


clear	Reset functions
counters	Clear counters
interface	Clear interface counters
ifindex	Clear interface counters
snmp	Clear snmp interface counters

Command Mode

/exec

clear counters mpls strip

Syntax Description


clear	Reset functions
mpls	MPLS information
strip	Stripping of MPLS headers
counters	stats/counters for labels

Command Mode

/exec

clear counters tah-buffers

clear counters tah-buffers [ module <module> ] [ { instance <instance> | { unit <unit> slice <slice> } } ]

Syntax Description


clear	Reset functions
counters	Clear counters
tah-buffers	Clear system buffer max cell usage counter
instance	(Optional) ASIC Instance Number
instance	(Optional) ASIC Instance Number in Decimal
unit	(Optional) Asic Number
unit	(Optional) Asic Number on the module
slice	(Optional) slice num on asic
slice	(Optional) slice number on asic
module	(Optional) Slot/module
module	(Optional) Slot/module number

Command Mode

/exec

clear crypto ca trustpool timer

Syntax Description


clear	Reset functions
crypto	Set crypto settings
ca	Configure certificate authority related information
trustpool	certificate trustpool
timer	clear trustpool timer

Command Mode

/exec/

clear debug logfile

clear debug logfile <s0>

Syntax Description


clear	Reset functions
debug	Debugging functions
logfile	Remove the debug logfile
s0	Provide name of the file

Command Mode

/exec

clear device-alias database

Syntax Description


clear	Reset functions
device-alias	Clear commands for device-alias
database	Clear device-alias database

Command Mode

/exec

clear device-alias session

Syntax Description


clear	Reset functions
device-alias	Clear commands for device-alias
session	Clear device-alias session

Command Mode

/exec

clear device-alias statistics

Syntax Description


clear	Reset functions
device-alias	Clear commands for device-alias
statistics	Clear device-alias statistics

Command Mode

/exec

clear dot1x all

{ clear dot1x all } | { clear dot1x interface <if> } | { clear dot1x mac <addr> } | { clear dot1x dacl-clients }

Syntax Description


clear	Reset functions
dot1x	dot1x configuration commands
all	Authenticator instances on all interfaces
mac	Specific MAC address of the Supplicant
dacl-clients	All existing DACLs
if	target interface
addr	MAC Address

Command Mode

/exec

clear dot1x stats interface

{ clear dot1x stats interface <if> } | { clear dot1x stats mac <addr> }

Syntax Description


clear	Reset functions
dot1x	dot1x configuration commands
stats	clear stats
mac	Specific MAC address of the Supplicant
if	target interface
addr	MAC Address

Command Mode

/exec

clear dpvm auto-learn

clear dpvm auto-learn [ pwwn <wwn0> ] [ mac <mac0> ]

Syntax Description


clear	Reset functions
dpvm	Dynamic Port Vsan Membership (dpvm)
auto-learn	Clear dpvm auto-learnt entries
pwwn	(Optional) Device PWWN
wwn0	(Optional) PWWN of the Device
mac	(Optional) FCoE Device MAC
mac0	(Optional) MAC address

Command Mode

/exec

clear dpvm merge statistics

Syntax Description


clear	Reset functions
dpvm	Dynamic Port Vsan Membership (dpvm)
merge	Clear dpvm merge information
statistics	Clear dpvm merge statistics

Command Mode

/exec

clear dpvm session

Syntax Description


clear	Reset functions
dpvm	Dynamic Port Vsan Membership (dpvm)
session	Clear dpvm session

Command Mode

/exec

clear ecp statistics

Syntax Description


clear	Reset functions
ecp	ECP (Edge Control Protocol)
statistics	Clear ECP Statistics

Command Mode

/exec

clear epbr statistics policy

clear epbr statistics policy <policy-name>

Syntax Description


clear	Reset functions
epbr	EPBR policy
statistics	EPBR statistics
policy	EPBR Policy
policy-name	EPBR policy-name

Command Mode

/exec

clear esmc counters

clear esmc counters [ interface <if0> ]

Syntax Description


clear	Reset functions
esmc	Ethernet Synchronization Messaging Channel
counters	clear ESMC packet counters
interface	(Optional) Enter the port interface
if0	(Optional)

Command Mode

/exec

clear evb hosts

clear evb { hosts | vsi } [ force-standby ] *

Syntax Description


clear	Reset functions
evb	EVB (Edge Virtual Bridge)
hosts	Clear EVB host information
vsi	Clear EVB vsi information
force-standby	(Optional) Force to clear standby entries
*	Clear all entries (Should be a * character)

Command Mode

/exec

clear evb hosts

clear evb { hosts | vsi } [ force-standby ] [ { [ mac <mac-addr> | interface <intf-name> | vlan <vlan-id> | vni <vni-id> | ip <ip-addr> | ipv6 <ipv6-addr> ] + } ]

Syntax Description


clear	Reset functions
evb	EVB (Edge Virtual Bridge)
hosts	Clear EVB host information
vsi	Clear EVB vsi information
force-standby	(Optional) Force to clear standby entries
mac	(Optional) Clear entries by filtering MAC address
mac-addr	(Optional) MAC Address
interface	(Optional) Clear entries by filtering interface
intf-name	(Optional) Interface name
vlan	(Optional) Clear entries by filtering VLAN
vlan-id	(Optional) VLAN ID
vni	(Optional) Clear entries by filtering VNI
vni-id	(Optional) VNI
ip	(Optional) Clear entries by filtering IP address
ipv6	(Optional) Clear entries by filtering IPv6 address
ip-addr	(Optional) IPV4 host address

Command Mode

/exec

clear evb statistics

Syntax Description


clear	Reset functions
evb	EVB (Edge Virtual Bridge)
statistics	Clear EVB Statistics

Command Mode

/exec

clear fabric-binding statistics vsan

clear fabric-binding statistics vsan <i0>

Syntax Description


clear	Reset functions
fabric-binding	Fabric Binding
statistics	Clear fabric-binding counters
vsan	Clear statistics for a VSAN
i0	VSAN range

Command Mode

/exec

clear fabric database dci vrf node-id

clear fabric database dci vrf { <vrf-name> | <vrf-known-name> } node-id <mgmt-ip-address> [ peer-id <peer-ip-address> ]

Syntax Description


clear	Reset functions
fabric	Fabric
database	Fabric Database
dci	DCI profile
vrf	Display per-VRF information
vrf-name	VRF name
vrf-known-name	Known VRF name
node-id	management ip address of this node
mgmt-ip-address	IP address in CIDR format
peer-id	(Optional) management ip address of peer
peer-ip-address	(Optional) IP address in CIDR format

Command Mode

/exec

clear fabric database host statistics

Syntax Description


clear	Reset functions
fabric	Fabric
database	Fabric Database
host	Auto-configured Hosts
statistics	Statistics

Command Mode

/exec

clear fabric database statistics

clear fabric database statistics [ type { network | profile | cabling | partition | bl-dci } [ server-proto ldap { ipv6 <ipv6addr> | ip <ipaddr> | host <hostname> } [ port <portnum> ] [ vrf { <vrf-name> | <vrf-known-name> } ] ] ]

Syntax Description


clear	Reset functions
fabric	Fabric
database	Clear Fabric Database
statistics	Clear database statistics
type	(Optional) Enter database type
network	(Optional) Network Database
profile	(Optional) Port or Switch Profile Database
cabling	(Optional) Cable Management Database
partition	(Optional) Partition Database
bl-dci	(Optional) Border Leaf - DCI
server-proto	(Optional) Enter database protocol
ldap	(Optional) Use LDAP
ipv6	(Optional) IPv6 address of server
ip	(Optional) IP address of server
ipaddr	(Optional) Enter IP address of server
host	(Optional) Hostname of server
hostname	(Optional) Enter hostname of server
port	(Optional) Port
portnum	(Optional) Enter port number
vrf	(Optional) vrf context
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name

Command Mode

/exec

clear fabric database statistics type server-proto xmpp ip

clear fabric database statistics type { network | profile | cabling | partition | bl-dci } server-proto xmpp { ip <ipaddr> | host <hostname> } [ port <portnum> ] [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description


clear	Reset functions
fabric	Fabric
database	Clear Fabric Database
statistics	Clear database statistics
type	Enter database type
network	Network Database
profile	Port or Switch Profile Database
cabling	Cable Management Database
partition	Partition Database
bl-dci	Border Leaf - DCI
server-proto	Enter database protocol
xmpp	Use XMPP
ip	IP address of server
ipaddr	Enter IP address of server
host	Hostname of server
hostname	Enter hostname of server
port	(Optional) Port
portnum	(Optional) Enter port number
vrf	(Optional) vrf context
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name

Command Mode

/exec

clear fabric database statistics type server-proto radius group

clear fabric database statistics type { network | profile | cabling | partition | bl-dci } server-proto radius group <groupname>

Syntax Description


clear	Reset functions
fabric	Fabric
database	Clear Fabric Database
statistics	Clear database statistics
type	Enter database type
network	Network Database
profile	Port or Switch Profile Database
cabling	Cable Management Database
partition	Partition Database
bl-dci	Border Leaf - DCI
server-proto	Enter database protocol
radius	Use RADIUS
group	AAA group
groupname	Enter AAA group name of servers

Command Mode

/exec

clear fabric forwarding dup-host

clear fabric forwarding dup-host [ { ip <ip-addr> | ipv6 <ipv6-addr> } ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description


clear	Reset functions
fabric	Fabric
forwarding	Fabric Forwarding Protocol: Host Mobility Manager (HMM)
dup-host	Duplicate host
ip	(Optional) Clear IP commands
ip-addr	(Optional) IPV4 source address
ipv6	(Optional) Clear IPv6 commands
vrf	(Optional) Display per-VRF information
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
all	(Optional) Clear duplicate hosts for all vrfs

Command Mode

/exec

clear fabricpath isis adjacency

clear fabricpath isis [ <l2mp-isis-tag> ] adjacency { * | { <interface> | system-id <sid> } + }

Syntax Description


clear	Reset functions
fabricpath	Clear fabricpath information
isis	Fabricpath IS-IS information
l2mp-isis-tag	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED
adjacency	Clear IS-IS adjacency state
*	IS-IS adjacencies on all interfaces
interface	IS-IS interface
system-id	Hostname or System ID
sid	Hostname or System ID (in the form of XXXX.XXXX.XXXX)

Command Mode

/exec

clear fabricpath isis statistics

clear fabricpath isis [ <l2mp-isis-tag> ] statistics *

Syntax Description


clear	Reset functions
fabricpath	Clear fabricpath information
isis	Fabricpath IS-IS information
l2mp-isis-tag	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED
statistics	Clear IS-IS protocol statistics
*	All IS-IS protocol statistics

Command Mode

/exec

clear fabricpath isis traffic

clear fabricpath isis [ <l2mp-isis-tag> ] traffic { * | <interface> }

Syntax Description


clear	Reset functions
fabricpath	Clear fabricpath information
isis	Fabricpath IS-IS information
l2mp-isis-tag	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED
traffic	Clear IS-IS traffic information
*	All IS-IS traffic information
interface	IS-IS interface

Command Mode

/exec

clear fc2

clear fc2 [ counters ]

Syntax Description


clear	Reset functions
fc2	Clear FC2 Port Counters
counters	(Optional) Clear All FC2/FCoE Port Counters

Command Mode

/exec

clear fcdomain session vsan

clear fcdomain session vsan <i0>

Syntax Description


clear	Reset functions
fcdomain	Clear lock across VSAN
session	Clear lock across VSAN
vsan	Specify the vsan id
i0	VSAN id

Command Mode

/exec

clear fcns statistics vsan

clear fcns statistics vsan <i0>

Syntax Description


clear	Reset functions
fcns	clear fcns counters
statistics	clear name server statistics
vsan	clear name server statistics for the given vsan(s)
i0	VSAN id range

Command Mode

/exec

clear fcs statistics vsan

clear fcs statistics vsan <i0>

Syntax Description


clear	Reset functions
statistics	Clear fcs counters
vsan	Clear statistics for a VSAN
i0	VSAN range

Command Mode

/exec

clear fctimer session

Syntax Description


clear	Reset functions
fctimer	clear fctimer cfs session
session	abort an existing cfs session

Command Mode

/exec

clear flow cache

clear flow cache [ ipv4 | ipv6 | ce ] [ force-export ]

Syntax Description


clear	Reset functions
flow	NetFlow information
cache	Clear only cache contents
ipv4	(Optional) Show ipv4 cache entries
ipv6	(Optional) Show ipv6 cache entries
ce	(Optional) Show ce cache entries
force-export	(Optional) Force the cache entries to be exported

Command Mode

/exec

clear flow cache

clear flow cache [ ipv4 | ipv6 | ce ] [ force-export ]

Syntax Description


clear	Reset functions
flow	NetFlow information
cache	Clear only cache contents
ipv4	(Optional) Show ipv4 cache entries
ipv6	(Optional) Show ipv6 cache entries
ce	(Optional) Show ce cache entries
force-export	(Optional) Force the cache entries to be exported

Command Mode

/exec

clear flow exporter

clear flow exporter { [ name ] <exportername> | all }

Syntax Description


clear	Reset functions
flow	NetFlow information
exporter	Clear NetFlow exporter statistics
name	(Optional) The name of the exporter
exportername	Specify an exporter
all	Clear all exporter statistics

Command Mode

/exec

clear flow rtp details

clear flow rtp { details | history } [ ipv4 | ipv6 ]

Syntax Description


clear	Reset functions
flow	NetFlow information
rtp	Clear rtp cache contents
details	flow details
history	clear rtp history entries
ipv4	(Optional) clear ipv4 cache entries
ipv6	(Optional) clear ipv6 cache entries

Command Mode

/exec

clear forwarding adjacency mpls stats

clear forwarding [ ipv4 ] adjacency mpls stats [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ <aif> ] [ <anh> ] [ module <module> ]

Syntax Description


clear	Reset functions
forwarding	forwarding
adjacency	display adjacency information
mpls	mpls adjacency information
stats	Clear adjacency statistics
vrf	(Optional) display info per VRF
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
vrf-all	(Optional) Display information for all VRFs
ipv4	(Optional) ipv4
aif	(Optional) adjacency output interface
anh	(Optional) adjacency next hop
module	(Optional) slot
module	(Optional) slot number

Command Mode

/exec

clear forwarding cumulative counter

clear forwarding cumulative counter [ all | v4_ucast_add | v4_ucast_del | v6_ucast_add | v6_ucast_del ] [ module <module> ]

Syntax Description


clear	clear
forwarding	forwarding information
cumulative	accumulated prefix add/delete count
counter	counter
all	(Optional) all
v4_ucast_add	(Optional) IPv4 unicast route add count
v4_ucast_del	(Optional) IPv4 unicast route delete count
v6_ucast_add	(Optional) IPv6 unicast route add count
v6_ucast_del	(Optional) IPv6 unicast route delete count
module	(Optional) slot
module	(Optional) slot number

Command Mode

/exec

clear forwarding datamdt-route-history

Syntax Description


clear	Reset functions
forwarding	forwarding
datamdt-route-history	DataMDT Route history

Command Mode

/exec

clear forwarding distribution lisp counters all

Syntax Description


clear
forwarding	forwarding
distribution	fib distribution information
lisp	lisp application
counters	counters
all	all vrf's

Command Mode

/exec

clear forwarding events-history

Syntax Description


clear	Reset functions
forwarding	forwarding
events-history	Events history

Command Mode

/exec

clear forwarding inconsistency

clear forwarding [ ipv4 | ip ] [ unicast ] inconsistency

Syntax Description


clear	clear
forwarding	forwarding
ip	(Optional) ipv4
ipv4	(Optional) ipv4
unicast	(Optional) unicast
inconsistency	route inconsistency check

Command Mode

/exec

clear forwarding ipv4 multicast counters

clear forwarding ipv4 multicast counters [ vrf { <vrf-name> | <vrf-known-name> | all } ] { [ group <gaddr> [ source <saddr> ] ] | [ source <saddr> [ group <gaddr> ] ] } [ module <module> ]

Syntax Description


clear
forwarding	fib information
vrf	(Optional) Specify VRF
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
all	(Optional) Display information for all VRFs
ipv4	Ipv4
multicast	Multicast IPv4 information
counters
group	(Optional) Multicast IPv4 Group specific info
gaddr	(Optional) Multicast IPv4 Group Address
source	(Optional) Multicast IPv4 Source specific info
saddr	(Optional) Multicast IPv4 Source Address
module	(Optional) slot
module	(Optional) slot number

Command Mode

/exec

clear forwarding ipv6-l3-route-history

Syntax Description


clear	Reset functions
forwarding	forwarding
ipv6-l3-route-history	IPV6 L3 Route history

Command Mode

/exec

clear forwarding ipv6 adjacency mpls stats

clear forwarding ipv6 adjacency mpls stats [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ <aif> ] [ <anh> ] [ module <module> ]

Syntax Description


clear	Reset functions
forwarding	forwarding
ipv6	ipv6
adjacency	adjacency information
mpls	mpls adjacency information
stats	Clear adjacency statistics
vrf	(Optional) display info per VRF
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
vrf-all	(Optional) Display information for all VRFs
aif	(Optional) adjacency output interface
module	(Optional) slot
module	(Optional) slot number

Command Mode

/exec

clear forwarding ipv6 inconsistency

clear forwarding ipv6 [ unicast ] inconsistency

Syntax Description


clear	clear
forwarding	forwarding
ipv6	ipv6
unicast	(Optional) unicast
inconsistency	route inconsistency check

Command Mode

/exec

clear forwarding ipv6 multicast counters

clear forwarding ipv6 multicast counters [ vrf { <vrf-name> | <vrf-known-name> | all } ] { [ group <gaddr> [ source <saddr> ] ] | [ source <saddr> [ group <gaddr> ] ] } [ module <module> ]

Syntax Description


clear
forwarding	fib information
vrf	(Optional) Specify VRF
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
all	(Optional) Display information for all VRFs
ipv6	Ipv6
multicast	Multicast IPv6 information
counters
group	(Optional) Multicast IPv6 Group specific info
source	(Optional) Multicast IPv6 Source specific info
module	(Optional) slot
module	(Optional) slot number

Command Mode

/exec

clear forwarding ipv6 route module

clear forwarding ipv6 { route } [ vrf <vrf-name> ] { <prefix> | all_routes } module { all_modules | <module> } [ no-urib ]

Syntax Description


clear
forwarding	forwarding information
ipv6	ipv6
route	route
vrf	(Optional) delete routes for a specific vrf
vrf-name	(Optional) VRF name
all_routes	delete all routes
module	module
all_modules	all module's
module	module number
no-urib	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

Command Mode

/exec

clear forwarding l2-mc-route-history

Syntax Description


clear	Reset functions
forwarding	forwarding
l2-mc-route-history	L2 MacgRoute history

Command Mode

/exec

clear forwarding l2-oiflist-history

Syntax Description


clear	Reset functions
forwarding	forwarding
l2-oiflist-history	L2 Oiflist history

Command Mode

/exec

clear forwarding l2-route-history

Syntax Description


clear	Reset functions
forwarding	forwarding
l2-route-history	L2 Route history

Command Mode

/exec

clear forwarding l2_prime-oiflist-history

Syntax Description


clear	Reset functions
forwarding	forwarding
l2_prime-oiflist-history	L2 Oiflist history

Command Mode

/exec

clear forwarding l2mcast info l2-mc-route-history

clear forwarding l2mcast info l2-mc-route-history [ module <num> ]

Syntax Description


clear	Reset functions
forwarding	forwarding
l2mcast	l2mcast
info	L2mcast Internal Info
l2-mc-route-history	L2 Macg Route history
module	(Optional) Slot
num	(Optional) Slot number

Command Mode

/exec

clear forwarding l2mcast info l2-oiflist-history

clear forwarding l2mcast info l2-oiflist-history [ module <num> ]

Syntax Description


clear	Reset functions
forwarding	forwarding
l2mcast	l2mcast
info	L2mcast Internal Info
l2-oiflist-history	L2 oiflist history
module	(Optional) Slot
num	(Optional) Slot number

Command Mode

/exec

clear forwarding l2mcast info l2-route-history

clear forwarding l2mcast info l2-route-history [ module <num> ]

Syntax Description


clear	Reset functions
forwarding	forwarding
l2mcast	l2mcast
info	L2mcast Internal Info
l2-route-history	L2 Route history
module	(Optional) Slot
num	(Optional) Slot number

Command Mode

/exec

clear forwarding l2mcast info l2-xbar-history

clear forwarding l2mcast info l2-xbar-history [ module <num> ]

Syntax Description


clear	Reset functions
forwarding	forwarding
l2mcast	l2mcast
info	L2mcast Internal Info
l2-xbar-history	L2 Route history
module	(Optional) Slot
num	(Optional) Slot number

Command Mode

/exec

clear forwarding l2mcast info statistics

clear forwarding l2mcast info statistics [ module <num> ]

Syntax Description


clear	Clear all entries
forwarding	Forwarding Information
l2mcast	Layer-2 multicast
info	L2mcast Internal Info
statistics	L2mcast Internal Info Statistics
module	(Optional) Slot
num	(Optional) Slot number

Command Mode

/exec

clear forwarding l2rib-route-history

Syntax Description


clear	Reset functions
forwarding	forwarding
l2rib-route-history	L2rib Route history

Command Mode

/exec

clear forwarding l2vpn trace member-history

Syntax Description


clear	Reset functions
forwarding	forwarding
l2vpn	L2VPN
trace	internal trace
member-history	member history

Command Mode

/exec

clear forwarding l3-route-history

Syntax Description


clear	Reset functions
forwarding	forwarding
l3-route-history	L3 Route history

Command Mode

/exec

clear forwarding mpls drop-stats

Syntax Description


clear	Clear Statistics
forwarding	forwarding
mpls	mpls forwarding
drop-stats	Clear dropped packets stats

Command Mode

/exec

clear forwarding mpls stats

clear forwarding mpls stats [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ table <table_id> ] [ [ label <label> | <prefix> | <v6prefix> ] | [ label-space <label-space-id> ] ] [ module <module> ]

Syntax Description


clear	Reset functions
forwarding	forwarding
mpls	mpls
stats	Clear Input Statistics
vrf	(Optional) display info per VRF
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known vrf name
vrf-all	(Optional) Display information for all VRFs
table	(Optional) display info per vpn-id
table_id	(Optional) table number
label-space	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED
label-space-id	(Optional) label space id
label	(Optional) mpls labels
label	(Optional) mpls label value
prefix	(Optional) Labels for single exact match route
module	(Optional) slot
module	(Optional) slot number

Command Mode

/exec

clear forwarding mpls trace adj-history

clear forwarding mpls trace adj-history [ module <module> ]

Syntax Description


clear	Reset functions
forwarding	forwarding
mpls	mpls
trace	internal trace
adj-history	adjacency history
module	(Optional) slot
module	(Optional) slot number

Command Mode

/exec

clear forwarding mpls trace ecmp-history

clear forwarding mpls trace ecmp-history [ module <module> ]

Syntax Description


clear	Reset functions
forwarding	forwarding
mpls	mpls
trace	internal trace
ecmp-history	ECMP history
module	(Optional) slot
module	(Optional) slot number

Command Mode

/exec

clear forwarding mpls trace label-history

clear forwarding mpls trace label-history [ module <module> ]

Syntax Description


clear	Reset functions
forwarding	forwarding
mpls	mpls
trace	internal trace
label-history	label history
module	(Optional) slot
module	(Optional) slot number

Command Mode

/exec

clear forwarding mpls trace te-history

clear forwarding mpls trace te-history [ module <module> ]

Syntax Description


clear	Reset functions
forwarding	forwarding
mpls	mpls
trace	internal trace
te-history	TE history
module	(Optional) slot
module	(Optional) slot number

Command Mode

/exec

clear forwarding oiflist-history

Syntax Description


clear	Reset functions
forwarding	forwarding
oiflist-history	Oiflist history

Command Mode

/exec

clear forwarding otv oiflist-history

Syntax Description


clear	Reset functions
forwarding	forwarding
otv	Display OTV information
oiflist-history	Oiflist history

Command Mode

/exec

clear forwarding proactive-cc inconsistencies

Syntax Description


clear
forwarding	Forwarding Information
proactive-cc	Proactive Consistency Checker
inconsistencies	Clear CC run inconsistencies

Command Mode

/exec

clear forwarding proactive-cc stats

Syntax Description


clear
forwarding	Forwarding Information
proactive-cc	Proactive Consistency Checker
stats	Clear CC run stats

Command Mode

/exec

clear forwarding route module

clear forwarding [ ip | ipv4 ] { route } [ vrf <vrf-name> ] { <prefix> | all_routes } module { all_modules | <module> } [ no-urib ]

Syntax Description


clear
forwarding	forwarding information
ip	(Optional) ipv4
ipv4	(Optional) ipv4
route	route
vrf	(Optional) delete routes for a specific vrf
vrf-name	(Optional) VRF name
prefix	delete specific prefix
all_routes	delete all routes
module	module
all_modules	all module's
module	module number
no-urib	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

Command Mode

/exec

clear forwarding trace ecmp-history

clear forwarding trace ecmp-history [ module <module> ]

Syntax Description


clear	Reset functions
forwarding	forwarding
trace	internal trace
ecmp-history	ECMP history
module	(Optional) slot
module	(Optional) slot number

Command Mode

/exec

clear forwarding trace mfib mct-history

Syntax Description


clear	Reset functions
forwarding	forwarding
trace	internal trace
mfib	mfib entries
mct-history	mct history

Command Mode

/exec

clear forwarding trace mfib oif-history

Syntax Description


clear	Reset functions
forwarding	forwarding
trace	internal trace
mfib	mfib entries
oif-history	oif history

Command Mode

/exec

clear forwarding trace mfib oiflist-history

Syntax Description


clear	Reset functions
forwarding	forwarding
trace	internal trace
mfib	mfib entries
oiflist-history	oiflist history

Command Mode

/exec

clear forwarding trace mfib otv oif-history

Syntax Description


clear	Reset functions
forwarding	forwarding
trace	internal trace
mfib	mfib entries
otv	otv entries
oif-history	oif history

Command Mode

/exec

clear forwarding trace mfib otv oiflist-history

Syntax Description


clear	Reset functions
forwarding	forwarding
trace	internal trace
mfib	mfib entries
otv	otv entries
oiflist-history

Bias-Free Language

Results

Chapter: C Commands

C Commands

cable-delay compensation

cabundle

cabundle url

callhome

callhome send configuration

callhome send diagnostic

callhome test

callhome test inventory

candidate-paths

candidate-paths

capability additional-paths receive

capability additional-paths send

capability suppress 4-byte-as

capability vrf-lite

capture

capture

capture

capture rcv

capture rcv

capture session

carrier-delay

cd

cdp advertise v1

cdp enable

cdp enable

cdp format device-id

cdp holdtime

cdp timer

certificate

certificate

certificate trustpoint

cfs debug all

cfs distribute

cfs eth distribute

cfs ipv4 distribute

cfs ipv4 mcast-address

cfs ipv6 distribute

cfs ipv6 mcast-address

cfs refresh static-peers

cfs region

cfs static-peers

change-password

channel-group

channel-group

channel-group

channel-group

channel-group auto

channel-group force

channel-group force

channel mode active

chassis associate chassis-serial module-serial port-profile module-side left

chassis management-instance fabric

checkpoint

checkpoint

cipher-suite

cipher-suite

class-map

class-map type control-plane

class-map type network-qos

class-map type queuing

class-map type queuing

class

class

class __inline__

class class-default

class type network-qos

class type network-qos class-default

class type psp

class type queuing

clear

clear

clear

clear

clear aaa client radius statistics

clear aaa local user blocked username

class inline