IPv6 Multicast
|
12.0(26)S
12.2(25)SG
12.2(33)SRA
12.2(18)SXE
12.3(2)T
12.4
12.4(2)T
15.0(2)SE
Cisco IOS XE Release 2.1
|
IPv6 multicast allows a host to send a single data stream to a subset of all hosts simultaneously.
The following commands were introduced or modified:
clear ipv6 pim topology,
debug ipv6 mld,
debug ipv6 mrib,
debug ipv6 pim,
debug ipv6 pim neighbor,
ipv6 mld join-group,
ipv6 mld query-interval,
ipv6 mld query-max-response-time,
ipv6 mld query-timeout,
ipv6 mld router,
ipv6 mld static-group,
ipv6 multicast-routing
,
ipv6 pim,
ipv6 pim dr-priority,
ipv6 pim hello-interval,
ipv6 pim rp-address
,
ipv6 pim spt-threshold infinity
,
show ipv6 mld groups,
show ipv6 mld groups summary,
show ipv6 mld interface,
show ipv6 mrib client,
show ipv6 mrib route,
show ipv6 mroute,
show ipv6 pim group-map,
show ipv6 pim interface,
show ipv6 pim neighbor,
show ipv6 pim range-list,
show ipv6 pim topology,
show ipv6 pim tunnel.
|
IPv6 Multicast Address Group Range Support
|
15.0(1)M
12.2(40)SG
3.2.0SG
15.0(2)SG
12.2(33)SRE
12.2(33)SXI
Cisco IOS XE Release 2.6
|
This feature is also known as Disable Group Ranges.
This feature provides an access control mechanism for IPv6 multicast edge routing.
The following commands were introduced or modified:
ipv6 mld access-group,
ipv6 multicast boundary scope,
ipv6 multicast group-range.
|
IPv6 Multicast: Scope Boundaries
|
12.0(26)S
12.2(18)S
12.2(25)SG
12.2(33)SRA
12.3(2)T
12.4
12.4(2)T
15.0(1)S
|
IPv6 includes support for global and nonglobal addresses. This feature describes the usage of IPv6 addresses of different scopes.
|
IPv6 Multicast: Bootstrap Router
|
12.0(28)S
12.2(25)S
12.2(25)SG
12.2(33)SRA
12.2(33)SXH
12.3(11)T
12.4
12.4(2)T
Cisco IOS XE Release 2.4
15.0(1)S
|
If an RP becomes unreachable, this feature allows the RP to be detected and the mapping tables modified so that the unreachable RP is no longer used, and the new tables will be rapidly distributed throughout the domain.
The following commands were introduced or modified:
debug ipv6 pim bsr, ipv6 pim bsr border, ipv6 pim bsr candidate bsr,
ipv6 pim bsr candidate rp,
show ipv6 pim bsr,
show ipv6 pim group-map.
|
IPv6 BSR: Configure RP Mapping
|
12.2(33)SRE
12.2(50)SY
12.4(2)T
Cisco IOS XE Release 2.4
15.0(1)S
|
This feature allows IPv6 multicast devices to be statically configured to announce scope-to-RP mappings directly from the BSR instead of learning them from candidate-RP messages.
The following commands were introduced or modified:
ipv6 multicast-routing,
ipv6 pim bsr announced rp,
ipv6 pim bsr candidate bsr.
|