BGP Support for Dual AS Configuration for Network AS Migrations

The BGP Support for Dual AS Configuration for Network AS Migrations feature extended the functionality of the BGP Local-AS feature by providing additional autonomous system path customization configuration options. The configuration of this feature is transparent to customer peering sessions, allowing the provider to merge two autonomous systems without interrupting customer peering arrangements. Customer peering sessions can later be updated during a maintenance window or during other scheduled downtime.

Finding Feature Information

Your software release may not support all the features documented in this module. For the latest caveats and feature information, see Bug Search Tool and the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the feature information table at the end of this module.

Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.

Information About BGP Support for Dual AS Configuration for Network AS Migrations

Autonomous System Migration for BGP Networks

Autonomous system migration can be necessary when a telecommunications or Internet service provider purchases another network. It is desirable for the provider to be able to integrate the second autonomous system without disrupting existing customer peering arrangements. The amount of configuration required in the customer networks can make this a cumbersome task that is difficult to complete without disrupting service.

Dual Autonomous System Support for BGP Network Autonomous System Migration

In Cisco IOS Release 12.0(29)S, 12.3(14)T, 12.2(33)SXH, and later releases, support was added for dual BGP autonomous system configuration to allow a secondary autonomous system to merge under a primary autonomous system, without disrupting customer peering sessions. The configuration of this feature is transparent to customer networks. Dual BGP autonomous system configuration allows a router to appear, to external peers, as a member of secondary autonomous system during the autonomous system migration. This feature allows the network operator to merge the autonomous systems and then later migrate customers to new configurations during normal service windows without disrupting existing peering arrangements.

The neighbor local-as command is used to customize the AS_PATH attribute by adding and removing autonomous system numbers for routes received from eBGP neighbors. This feature allows a router to appear to external peers as a member of another autonomous system for the purpose of autonomous system number migration. This feature simplifies this process of changing the autonomous system number in a BGP network by allowing the network operator to merge a secondary autonomous system into a primary autonomous system and then later update the customer configurations during normal service windows without disrupting existing peering arrangements.

BGP Autonomous System Migration Support for Confederations, Individual Peering Sessions, and Peer Groupings

This feature supports confederations, individual peering sessions, and configurations applied through peer groups and peer templates. If this feature is applied to group peers, the individual peers cannot be customized.

Ingress Filtering During BGP Autonomous System Migration

Autonomous system path customization increases the possibility that routing loops can be created if such customization is misconfigured. The larger the number of customer peerings, the greater the risk. You can minimize this possibility by applying policies on the ingress interfaces to block the autonomous system number that is in transition or routes that have no local-as configuration.


Caution

BGP prepends the autonomous system number from each BGP network that a route traverses to maintain network reachability information and to prevent routing loops. This feature should be configured only for autonomous system migration and should be deconfigured after the transition has been completed. This procedure should be attempted only by an experienced network operator, as routing loops can be created with improper configuration.


BGP Network Migration to 4-Byte Autonomous System Numbers

The BGP Support for 4-Byte ASN feature introduced support for 4-byte autonomous system numbers. Because of increased demand for autonomous system numbers, in January 2009 the IANA started to allocate 4-byte autonomous system numbers in the range from 65536 to 4294967295.

The Cisco implementation of 4-byte autonomous system numbers supports RFC 4893. RFC 4893 was developed to allow BGP to support a gradual transition from 2-byte autonomous system numbers to 4-byte autonomous system numbers. A new reserved (private) autonomous system number, 23456, was created by RFC 4893 and this number cannot be configured as an autonomous system number in the Cisco IOS CLI.

Migrating your BGP network to 4-byte autonomous system numbers requires some planning. If you are upgrading to an image that supports 4-byte autonomous system numbers, you can still use 2-byte autonomous system numbers. The show command output and regular expression match are not changed and remain in asplain (decimal value) format for 2-byte autonomous system numbers regardless of the format configured for 4-byte autonomous system numbers.

To ensure a smooth transition, we recommend that all BGP speakers within an autonomous system that is identified using a 4-byte autonomous system number be upgraded to support 4-byte autonomous system numbers.

For details about steps to perform to upgrade a BGP network to full 4-byte autonomous system support, see the Migration Guide for Explaining 4-Byte Autonomous System white paper.

How to Configure BGP Support for Dual AS Configuration for Network AS Migrations

Configuring Dual AS Peering for Network Migration

Perform this task to configure a BGP peer router to appear to external peers as a member of another autonomous system for the purpose of autonomous system number migration. When the BGP peer is configured with dual autonomous system numbers then the network operator can merge a secondary autonomous system into a primary autonomous system and update the customer configuration during a future service window without disrupting existing peering arrangements.

The show ip bgp and show ip bgp neighbors commands can be used to verify autonomous system number for entries in the routing table and the status of this feature.


Note

  • The BGP Support for Dual AS Configuration for Network AS Migrations feature can be configured for only true eBGP peering sessions. This feature cannot be configured for two peers in different subautonomous systems of a confederation.
  • The BGP Support for Dual AS Configuration for Network AS Migrations feature can be configured for individual peering sessions and configurations applied through peer groups and peer templates. If this command is applied to a peer group, the peers cannot be individually customized.

SUMMARY STEPS

  1. enable
  2. configure terminal
  3. router bgp autonomous-system-number
  4. neighbor ip-address remote-as autonomous-system-number
  5. neighbor ip-address local-as [autonomous-system-number [no-prepend [replace-as [dual-as ]]]]
  6. neighbor ip-address remove-private-as
  7. end
  8. show ip bgp [network ] [network-mask ] [longer-prefixes ] [prefix-list prefix-list-name | route-map route-map-name ] [shorter-prefixes mask-length ]
  9. show ip bgp neighbors [neighbor-address ] [received-routes | routes | advertised-routes | paths regexp | dampened-routes | received prefix-filter ]

DETAILED STEPS

  Command or Action Purpose
Step 1

enable

Example:


Router> enable

Enables privileged EXEC mode.

  • Enter your password if prompted.

Step 2

configure terminal

Example:


Router# configure terminal

Enters global configuration mode.

Step 3

router bgp autonomous-system-number

Example:


Router(config)# router bgp 40000 

Enters router configuration mode, and creates a BGP routing process.

Step 4

neighbor ip-address remote-as autonomous-system-number

Example:


Router(config-router)# neighbor 10.0.0.1 remote-as 45000 

Establishes a peering session with a BGP neighbor.

Step 5

neighbor ip-address local-as [autonomous-system-number [no-prepend [replace-as [dual-as ]]]]

Example:


Router(config-router)# neighbor 10.0.0.1 local-as 50000 no-prepend replace-as dual-as 

Customizes the AS_PATH attribute for routes received from an eBGP neighbor.

  • The replace-as keyword is used to prepend only the local autonomous system number (as configured with the ip-address argument) to the AS_PATH attribute. The autonomous system number from the local BGP routing process is not prepended.

  • The dual-as keyword is used to configure the eBGP neighbor to establish a peering session using the real autonomous-system number (from the local BGP routing process) or by using the autonomous system number configured with the ip-address argument (local-as).

  • The example configures the peering session with the 10.0.0.1 neighbor to accept the real autonomous system number and the local-as number.

Step 6

neighbor ip-address remove-private-as

Example:


Router(config-router)# neighbor 10.0.0.1 remove-private-as 

(Optional) Removes private autonomous system numbers from outbound routing updates.

  • This command can be used with the replace-as functionality to remove the private autonomous system number and replace it with an external autonomous system number.

  • Private autonomous system numbers (64512 to 65535) are automatically removed from the AS_PATH attribute when this command is configured.

Step 7

end

Example:


Router(config-router)# end 

Exits router configuration mode and enters privileged EXEC mode.

Step 8

show ip bgp [network ] [network-mask ] [longer-prefixes ] [prefix-list prefix-list-name | route-map route-map-name ] [shorter-prefixes mask-length ]

Example:


Router# show ip bgp 

Displays entries in the BGP routing table.

  • The output can be used to verify if the real autonomous system number or local-as number is configured.

Step 9

show ip bgp neighbors [neighbor-address ] [received-routes | routes | advertised-routes | paths regexp | dampened-routes | received prefix-filter ]

Example:


Router# show ip bgp neighbors 

Displays information about TCP and BGP connections to neighbors.

  • The output will display local AS , no-prepend , replace-as , and dual-as with the corresponding autonomous system number when these options are configured.

Configuration Examples for Dual-AS Peering for Network Migration

Example: Dual AS Configuration

The following examples shows how this feature is used to merge two autonomous systems without interrupting peering arrangements with the customer network. The neighbor local-as command is configured to allow Router 1 to maintain peering sessions through autonomous system 40000 and autonomous system 45000. Router 2 is a customer router that runs a BGP routing process in autonomous system 50000 and is configured to peer with autonomous-system 45000.

Router 1 in Autonomous System 40000 (Provider Network)


interface Serial3/0 
 ip address 10.3.3.11 255.255.255.0 
! 
router bgp 40000 
 no synchronization 
 bgp router-id 10.0.0.11 
 neighbor 10.3.3.33 remote-as 50000 
 neighbor 10.3.3.33 local-as 45000 no-prepend replace-as dual-as

Router 1 in Autonomous System 45000 (Provider Network)


interface Serial3/0 
 ip address 10.3.3.11 255.255.255.0 
! 
router bgp 45000 
 bgp router-id 10.0.0.11 
 neighbor 10.3.3.33 remote-as 50000 

Router 2 in Autonomous System 50000 (Customer Network)


interface Serial3/0 
 ip address 10.3.3.33 255.255.255.0 
! 
router bgp 50000 
 bgp router-id 10.0.0.3 
 neighbor 10.3.3.11 remote-as 45000 

After the transition is complete, the configuration on router 50000 can be updated to peer with autonomous system 40000 during a normal maintenance window or during other scheduled downtime:


 neighbor 10.3.3.11 remote-as 100 

Example: Dual AS Confederation Configuration

The following example can be used in place of the Router 1 configuration in the "Example: Dual AS Configuration" example. The only difference between these configurations is that Router 1 is configured to be part of a confederation.


interface Serial3/0/0 
 ip address 10.3.3.11 255.255.255.0 
! 
router bgp 65534 
 no synchronization
 bgp confederation identifier 100  
 bgp router-id 10.0.0.11 
 neighbor 10.3.3.33 remote-as 50000 
 neighbor 10.3.3.33 local-as 45000 no-prepend replace-as dual-as 

Example: Replace an AS with Another AS in Routing Updates

The following example strips private autonomous system 64512 from outbound routing updates for the 10.3.3.33 neighbor and replaces it with autonomous system 50000:


router bgp 64512 
 neighbor 10.3.3.33 local-as 50000 no-prepend replace-as 

Additional References

Related Documents

Related Topic

Document Title

Cisco IOS commands

Cisco IOS Master Command List, All Releases

BGP commands

Cisco IOS IP Routing: BGP Command Reference

Technical Assistance

Description

Link

The Cisco Support and Documentation website provides online resources to download documentation, software, and tools. Use these resources to install and configure the software and to troubleshoot and resolve technical issues with Cisco products and technologies. Access to most tools on the Cisco Support and Documentation website requires a Cisco.com user ID and password.

http://www.cisco.com/cisco/web/support/index.html

Feature Information for BGP Support for Dual AS Configuration for Network AS Migrations

The following table provides release information about the feature or features described in this module. This table lists only the software release that introduced support for a given feature in a given software release train. Unless noted otherwise, subsequent releases of that software release train also support that feature.

Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not required.

Table 1. Feature Information for BGP Support for Dual AS Configuration for Network AS Migrations

Feature Name

Releases

Feature Information

BGP Support for Dual AS Configuration for Network AS Migrations

The BGP Support for Dual AS Configuration for Network AS Migrations feature extended the functionality of the BGP Local-AS feature by providing additional autonomous system path customization configuration options. The configuration of this feature is transparent to customer peering sessions, allowing the provider to merge two autonomous systems without interrupting customer peering arrangements. Customer peering sessions can later be updated during a maintenance window or during other scheduled downtime.

The following command was modified by this feature: neighbor local-as.