The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
You need to configure Cisco Smart Software Licensing on Cisco Smart Software Manager (Cisco SSM) to easily procure, deploy, and manage licenses for your Cisco Container Platform instance. The number of licenses required
depends on the number of VMs necessary for your deployment scenario.
Cisco SSM enables you to manage your Cisco Smart Software Licenses from one centralized website. With Cisco SSM, you can organize
and view your licenses in groups called virtual accounts. You can also use Cisco SSM to transfer the licenses between virtual
accounts as needed.
You can access Cisco SSM from the Cisco Software Central homepage, under the Smart Licensing area.
Cisco Container Platform is initially available for a 90-day evaluation period after which, you need to register the product.
Based on the level of security required for your environment, you can use one of the following licensing models:
You need to choose the licensing model when you register Cisco Container Platform.
This chapter contains the following topics:
Connected Model
In a connected deployment model, the license usage information is directly sent over the Internet or through an HTTP proxy
server to Cisco SSM.
For a higher degree of security, you can opt to use a partially connected deployment model, where the license usage information
is sent from Cisco Container Platform to a locally installed VM-based satellite server (Cisco SSM satellite). Cisco SSM satellite
synchronizes with Cisco SSM on a daily basis.
For the highest degree of security, you can opt to use Specific License Reservations in a fully disconnected model. In this
model, you do not need to have access to the Cisco SSM or Cisco SSM satellite. All license changes are processed manually.
Once you register Cisco Container Platform with Cisco SSM, you will receive the Cisco Container Platform License with Support license.
Cisco SSM totals the license requirements for all your Cisco Container Platform instances and compares the total license usage to the number of licenses purchased. After the data synchronization, your
Cisco Container Platform instance displays one of the following status indicators:
Authorized, when the number of licenses purchased is sufficient
Out of Compliance, when the number of licenses is insufficient
By default, Cisco Container Platform directly communicates with the Cisco SSM. You can modify the mode of communication by configuring the transport settings.
Before you begin
Ensure that you have obtained the registration token for the Cisco Container Platform instance.
Procedure
Step 1
Log in to the Cisco Container Platform web interface.
Step 2
From the left pane, click Licensing.
If you are running Cisco Container Platform in the Evaluation mode, a license notification is displayed on the Smart Software Licensing pane.
Step 3
If a license notification is displayed, click the edit the Smart Call Home Transport Settings link.
Alternatively, click the Licensing Status tab, and then click the View/Edit link that appears under Transport Settings.
Step 4
In the Transport Settings dialog box, perform one of these steps:
To configure Cisco Container Platform to send the license usage information to Cisco SSM using the Internet:
Click the DIRECT radio button.
Configure a DNS on Cisco Container Platform to resolve tools.cisco.com.
This is the default setting.
To configure Cisco Container Platform to send the license usage information to Cisco SSM using the Cisco SSM satellite:
Click the TRANSPORT GATEWAY radio button.
Enter the URL of the Cisco SSM satellite.
To configure Cisco Container Platform to send the license usage information to Cisco SSM using a proxy server. For example, an off-the-shelf proxy, such as Cisco
Transport Gateway or Apache:
Click the HTTP/HTTPS PROXY radio button.
Enter the IP address and port number of the proxy server.
Step 5
Click SAVE.
Registering Using Registration Token
You need to register your Cisco Container Platform instance with Cisco SSM or Cisco SSM satellite before the 90-day evaluation period expires.
The following figure shows the workflow for registering Cisco Container Platform using a registration token.
Figure 1. Workflow of Registering Using Registration Token
Perform these steps on Cisco SSM or Cisco SSM satellite to generate a registration token:
Go to Inventory > <Choose your virtual account> > General, and then click New Token.
If you want to enable higher levels of encryption for the products registered using the registration token, check the Allow export-controlled functionality on the products registered with this token check box.
Note
This option is available only if you are compliant with the Export-Controlled functionality.
Download or copy the token.
Step 2
Perform these steps in the Cisco Container Platform web interface to register the registration token and complete the license
registration process:
From the left pane, click Licensing.
In the license notification, click Register.
The Smart Software Licensing Product Registration dialog box appears.
In the Product Instance Registration Token field, enter, paste, or upload the registration token that you generated in Step 1.
Click REGISTER to complete the registration process.
If registering the token fails, you can reregister the Cisco Container Platform instance using a new token.
Renewing Authorization
By default, the authorization is automatically renewed every 30 days. However, Cisco Container Platform allows a user to manually initiate the authorization renew in case the automatic renewal process fails. The authorization
expires if Cisco Container Platform is not connected to Cisco SSM or Cisco SSM satellite for 90 days and the licenses consumed by Cisco Container Platform are reclaimed and put back to the license pool.
Before you begin
Ensure that the Cisco Container Platform instance is registered with Cisco SSM or Cisco SSM satellite.
Procedure
Step 1
Log in to the Cisco Container Platform web interface.
Step 2
From the left pane, click Licensing.
Step 3
From the ACTIONS drop-down list, choose Renew Authorization Now.
Step 4
Click OK in the Renew Authorization dialog box.
Cisco Container Platform synchronizes with Cisco SSM or Cisco SSM satellite to check the license authorization status and Cisco SSM or Cisco SSM satellite
reports back the status to Cisco Container Platform, on a daily basis.
Reregistering Cisco Container Platform License
You can reregister Cisco Container Platform with Cisco SSM or Cisco SSM satellite by deregistering it and registering it again, or by using a register force option.
Before you begin
Ensure that you have obtained a new registration token from Cisco SSM or Cisco SSM satellite.
Procedure
Step 1
Log in to the Cisco Container Platform web interface.
Step 2
From the left pane, click Licensing.
Step 3
From the ACTIONS drop-down list, choose Reregister.
Step 4
In the Product Instance Registration Token field of the Smart Software Licensing Product Reregistration dialog box, enter the registration token that you generated using Cisco SSM or Cisco SSM satellite.
Step 5
Click REGISTER to complete the registration process.
Cisco Container Platform sends a request to Cisco SSM or Cisco SSM satellite to check the registration status and Cisco SSM or Cisco SSM satellite
reports back the status to Cisco Container Platform, on a daily basis.
Deregistering Registration
You can deregister the Cisco Container Platform instance from Cisco SSM or Cisco SSM satellite to release all the licenses from the current Virtual account and the licenses
are available for use by other products in the virtual account. Deregistering disconnects Cisco Container Platform from Cisco SSM or Cisco SSM satellite.
Before you begin
Ensure that the Cisco Container Platform instance is registered with Cisco SSM or Cisco SSM satellite.
Procedure
Step 1
Log in to the Cisco Container Platform web interface.
Step 2
From the left pane, click Licensing.
Step 3
From the ACTIONS drop-down list, choose Deregister.
Step 4
Click DEREGISTER in the confirmation dialog box.
Cisco Container Platform sends a request to Cisco SSM or Cisco SSM satellite to check the deregistration status and Cisco SSM or Cisco SSM satellite
reports back the status to Cisco Container Platform, on a daily basis.
Workflow in a Disconnected Model
The following table describes the workflow of Cisco Smart Software Licensing in a disconnected model.
The following figure shows the workflow for registering Cisco Container Platform using Specific License Reservations (SLRs).
Figure 2. Workflow of Registering Using SLRs
Before you begin
Ensure that your smart account is authorized for License Reservation.
Procedure
Step 1
Perform these steps in the Cisco Container Platform web interface:
From the left pane, click Licensing.
In the license notification, click Register.
The Smart Software Licensing Product Registration dialog box appears.
Click the start here link to initiate Specific License Reservation.
In the Ensure Smart Account Can Use License Reservation dialog box, check the YES, MY SMART ACCOUNT IS LICENSE RESERVATION ENABLED check box, and then click CONTINUE.
In the Smart License Reservation dialog box, click GENERATE REQUEST CODE.
Copy and save the License Reservation Request Code.
Step 2
Perform these steps on Cisco SSM:
Go to Inventory > <Choose your virtual account> > Licenses, and then click License Reservation.
Note
If you cannot find the License Reservation button, contact Cisco support to enable this feature.
The Smart License Reservation dialog box appears.
In the Reservation Request Code field, enter, paste, or upload the License Reservation Request Code from Step 1, and then click Next.
In the Licenses to Reserve area, check the Reserve a specific license check box.
Under the Quantity To Reserve column, type the number of licenses to reserve for your product instance, and then click Next.
Click Generate Authorization Code.
Copy or download the authorization code.
Step 3
Perform these steps in the Cisco Container Platform web interface:
From the left pane, click Licensing.
In the license notification, click ENTER RESERVATION AUTHORIZATION CODE.
The Enter Reservation Authorization Code dialog box appears.
In the RESERVATION AUTHORIZATION CODE field, enter, paste, or upload the authorization code from Step 2.
Click RESERVE.
The number of licenses reserved is displayed in Licensing > Smart Licensing Usage. When your license usage is out of compliance, you can update the number of reserved licenses.
If your license usage is out of compliance, or you want to increase the number of licenses for your Cisco Container Platform
instance, you can update the number of reserved licenses.
Procedure
Step 1
Perform these steps in Cisco SSM:
Go to Inventory > <Choose your virtual account> > Product Instances.
From the ACTIONS drop-down list of your Cisco Container Platform instance, choose Update reserved licenses.
The Update License Reservation dialog box appears.
In the Licenses to Reserve area, check the Reserve a specific license check box.
Under the Quantity To Reserve column, modify the number of reserved licenses for your product instance, and then click Next.
Click Generate Authorization Code.
Copy or download the authorization code.
Step 2
Perform these steps in the Cisco Container Platform web interface:
From the left pane, click Licensing > Smart Licensing Usage.
From ACTIONS drop-down list, click Update Reservation.
The Enter Reservation Authorization Code dialog box appears.
In the RESERVATION AUTHORIZATION CODE field, enter, paste, or upload the reservation code from Step 1.
Click RESERVE.
A license reservation confirmation code is generated.
Step 3
Perform these steps in Cisco SSM:
In the Update License Reservation dialog box, click Enter Confirmation Code.
In the Reservation Confirmation Code field, enter, paste, or upload the confirmation code that you received in Step 2.
Click OK.
The number of reserved licenses for your product instance is updated on Cisco SSM.
Deregistering Registration by Returning Reserved Licenses
You can deregister your Cisco Container Platform instance from Cisco SSM by returning the reserved licenses. Consequently,
these licenses are available for other product instances.
Procedure
Step 1
Perform these steps in the Cisco Container Platform web interface:
From the left pane, click Licensing.
The Smart Software Licensing page appears.
From ACTIONS drop-down list, click Return reserved licenses.
The Confirm Return Licenses dialog box appears.
Click GENERATE RESERVATION RETURN CODE.
If you cannot generate a Reservation Return Code, contact Cisco support.
Caution
The licenses remain reserved in Cisco SSM and cannot be used for other product instances until they are released on Cisco
SSM.
Step 2
Follow these steps in the Cisco SSM to release the licenses:
Go to Inventory > <Choose your virtual account> > Product Instances.
From the ACTIONS drop-down list of your Cisco Container Platform instance, choose Remove.
The Remove Product Instance dialog box appears.
In the Reservation Return Code field, enter, paste, or upload the reservation return code from Step 1.
Click Remove Product Instance.
The reserved licenses are released, and you can use them for other product instances. Your Cisco Container Platform instance
goes back to the evaluation mode.
Feedback