CISCO-EPM-NOTIFICATION-MIB
This appendix contains the CISCO-EPM-NOTIFICATION-MIB.
SNMP Varbind |
Data Type |
Varbind OID |
SNMP Varbing Description |
Example |
||
---|---|---|---|---|---|---|
cenAlarmVersion |
SnmpAdminString |
.1.3.6.1.4.9.9.311.1.1.2.1.2 |
The release version of this MIB. |
1.0 |
||
cenAlarmTimestamp |
Timestamp |
.1.3.6.1.4.9.9.311.1.1.2.1.3 |
The time when the alarm was raised.
|
1523608787 |
||
cenAlarmUpdatedTimestamp |
Timestamp |
.1.3.6.1.4.9.9.311.1.1.2.1.4 |
Alarms persist over time and it's value is updated automatically when field(s) changed.The updated time denotes a time. Each alarm is identified by the unique alarm instance id, Forexample, cenAlarmInstanceID. |
1523608788 |
||
cenAlarmInstanceID |
SnmpAdminString |
.1.3.6.1.4.9.9.311.1.1.2.1.5 |
The Unique Alarm Instance ID. |
1185098114 |
||
cenAlarmStatus |
Integer |
.1.3.6.1.4.9.9.311.1.1.2.1.6 |
The alarm status indicates the status of the alarm in integer value. |
Active=2, Cleared=3 |
||
cenAlarmStatusDefinition |
SnmpAdminString |
.1.3.6.1.4.9.9.311.1.1.2.1.7 |
The short description of the status of the alarm. The string is formatted in ',' tuples. The value is the same value that the 'cenAlarmStatus'attribute holds.Contains one line description of the alarm status generated. |
2, ACTIVE3,CLEARED |
||
cenAlarmType |
Integer |
.1.3.6.1.4.9.9.311.1.1.2.1.8 |
|
2 |
||
cenAlarmCategory |
Integer |
.1.3.6.1.4.9.9.311.1.1.2.1.9 |
The category of the alarm generated represented in integer value.
|
— |
||
cenAlarmCategoryDefinition |
SnmpAdminString |
.1.3.6.1.4.9.9.311.1.1.2.1.10 |
The short description of the category of the alarm generated. The String is formatted in ',' tuples. The value is the same value that the 'cenAlarmCategory' attribute holds. contains one line description of the alarm category generated. Cisco Evolved Programmable Network Manager Supported SNMP Traps Cisco Evolved Programmable Network Manager Supported Syslogs Cisco Evolved Programmable Network Manager Supported TL1 Messages |
"LINK_DOWN", "SWT_AUTH_FAIL", "LINK_UP" |
||
cenAlarmServerAddressType |
InetAddressType |
.1.3.6.1.4.9.9.311.1.1.2.1.11 |
The type of Internet address by which the server is reachable. The server is the server that is generating this trap. |
0: unknown 1:ipv4 2:ipv6 |
||
cenAlarmServerAddress |
InetAddress |
.1.3.6.1.4.9.9.311.1.1.2.1.12 |
The IP Address or the DNS name of the Management. Server that raised this alarm will be notified. |
10.127.101.145 |
||
cenAlarmManagedObjectClass |
SnmpAdminString |
.1.3.6.1.4.9.9.311.1.1.2.1.13 |
The class of the managed object for which this alarm was generated. For example, Router, Switch,GateKeeper and VoicePort. For a list of categories, see the 'Category' column in the following documents. These are for 2.1 (Derecho). For other versions, use cisco.com published documentation for the version that you need. Cisco Evolved Programmable Network Manager Supported SNMP Traps Cisco Evolved Programmable Network Manager Supported Syslogs Cisco Evolved Programmable Network Manager Supported TL1 Messages |
"Optical", "Carrier Ethernet" |
||
cenAlarmManagedObjectAddressType |
InetAddressType |
.1.3.6.1.4.9.9.311.1.1.2.1.14 |
The type of Internet address by which the managed object is reachable. |
0 : unknown 1 : ipv4 2 : ipv6 |
||
cenAlarmManagedObjectAddress |
InetAddress |
.1.3.6.1.4.9.9.311.1.1.2.1.15 |
The IP Address or the DNS name of the Managed Object. |
2405:200:204:138:172:30:9:121 |
||
cenAlarmDescription |
OctetString |
.1.3.6.1.4.9.9.311.1.1.2.1.16 |
A detailed description of the alarm. For a list of alarm descriptions, see the 'Description/Probable Cause' column in the following documents. These are for 2.1 (Derecho). For other versions, use cisco.com published documentation for the version that you need. Cisco Evolved Programmable Network Manager Supported SNMP Traps Cisco Evolved Programmable Network Manager Supported Syslogs Cisco Evolved Programmable Network Manager Supported TL1 Messages |
Port 'GigabitEthernet0/0/6' (Description: ' # TO GigabitEthernet0/0/7 #') is down on device '2405:200:204:138:172:30:9:121'.:Lost Carrier |
||
cenAlarmSeverity |
Integer |
.1.3.6.1.4.9.9.311.1.1.2.1.17 |
The alarm severity indicates the severity of the alarm in integer value.
|
4 |
||
cenAlarmSeverityDefinition |
SnmpAdminString |
.1.3.6.1.4.9.9.311.1.1.2.1.18 |
The short description of the severity of the alarm generated. The String is formatted in ',' tuples. The value is the same value that the 'cenAlarmSeverity ' attribute holds. contains one line description of the alarm severity generated.
|
4.CLEARED |
||
cenAlarmTriageValue |
Integer |
.1.3.6.1.4.9.9.311.1.1.2.1.19 |
The triage value of an alarm is a hierarchical weighting value (applied by the application, and more importantly customizable by the end user) to allow an artificial form of evaluating impact, interest, or other user-determined functions between alarms. The value is a positive number or zero where denotes an undetermined or uncomputable value.
|
— |
||
cenEventIDList |
OctetString |
.1.3.6.1.4.9.9.311.1.1.2.1.20 |
Comma separated list of the Unique Event identifiers that led to the generation of this Alarm.
|
— |
||
cenUserMessage1 |
SnmpAdminString |
.1.3.6.1.4.9.9.311.1.1.2.1.21 |
User input message. Information about the alarm including whether the alarm is a root cause alarm or a service - impacting alarm. srcObjectClassName= ProtocolEndpoint, srcObjectDisplayName= GigabitEthernet0/1/2/3, srcObjectBusinessKey= 172.20.127.100:GigabitEthernet0/1/2/3, chassisId=SAT101
|
— |
||
cenUserMessage2 |
SnmpAdminString |
.1.3.6.1.4.9.9.311.1.1.2.1.22 |
User input message. This value can be configured.
|
— |
||
cenUserMessage3 |
SnmpAdminString |
.1.3.6.1.4.9.9.311.1.1.2.1.23 |
User input message. This value can be configured.
|
— |
||
cenAlarmMode |
Integer |
.1.3.6.1.4.9.9.311.1.1.2.1.24 |
|
2 |
||
cenPartitionNumber |
Integer |
.1.3.6.1.4.9.9.311.1.1.2.1.24 |
In traps generated by the management application that support multiple partitions, the attribute will carry the integer value assigned to identify the logical group where the managed device resides.
|
0 |
||
cenPartitionName |
SnmpAdminString |
.1.3.6.1.4.9.9.311.1.1.2.1.26 |
In traps generated by the management application that support multiple partitions, the attribute will carry the name assigned to identify the logical group where the managed device resides. |
— |
||
cenCustomerIdentification |
SnmpAdminString |
.1.3.6.1.4.9.9.311.1.1.2.1.27 |
User input message. The attribute takes in a free format text. This attribute can be used by advanced management applications to sort responses from the fault management server.
|
— |
||
cenCustomerRevision |
SnmpAdminString |
.1.3.6.1.4.9.9.311.1.1.2.1.28 |
User input message. The attribute takes in a free format text. This attribute can be used by advanced management applications to sort responses from the fault management server.
|
— |
||
cenAlertID |
SnmpAdminString |
.1.3.6.1.4.9.9.311.1.1.2.1.29 |
In event based notification,this attribute will contain the alert id to which the generated event has been rolled upto. In alert based notification,the cenAlarmInstanceId and cenAlertID will be identical. |
1185098114 |