cenAlarmVersion

SnmpAdminString

.1.3.6.1.4.9.9.311.1.1.2.1.2

The release version of this MIB.

1.0

cenAlarmTimestamp

Timestamp

.1.3.6.1.4.9.9.311.1.1.2.1.3

The time when the alarm was raised.

1523608787

cenAlarmUpdatedTimestamp

Timestamp

.1.3.6.1.4.9.9.311.1.1.2.1.4

Alarms persist over time and its value is updated automatically when the field(s) is changed. The updated time denotes a time. Each alarm is identified by the unique alarm instance id,

For example, cenAlarmInstanceID.

1523608788

cenAlarmInstanceID

.1.3.6.1.4.9.9.311.1.1.2.1.5

The Unique Alarm Instance ID.

1185098114

cenAlarmStatus

Integer

.1.3.6.1.4.9.9.311.1.1.2.1.6

The alarm status indicates the status of the alarm in integer value.

Active=2, Cleared=3

cenAlarmStatusDefinition

SnmpAdminString

.1.3.6.1.4.9.9.311.1.1.2.1.7

The short description of the status of the alarm. The string is formatted in ',' tuples.

The value is the same value that the 'cenAlarmStatus'attribute holds. Contains one line description of the alarm status generated.

2, ACTIVE3, CLEARED

cenAlarmType

Integer

.1.3.6.1.4.9.9.311.1.1.2.1.8

• unknown(1) —When the value for this attribute could not be determined.

• direct(2)— Denotes an alarm generated by a set of events where all events are reported by an observation(s) of a managed object.

• indirect(3)—Denotes an alarm generated by a set of events where all events were deduced or inferred by the status of managed objects as determined by the network management system.

• mixed(4)—Denotes an alarm generated by a set of events which were either direct or indirect.

2

cenAlarmCategory

Integer

.1.3.6.1.4.9.9.311.1.1.2.1.9

The category of the alarm generated represented in integer value.

—

cenAlarmCategoryDefinition

SnmpAdminString

.1.3.6.1.4.9.9.311.1.1.2.1.10

The short description of the category of the alarm generated.

The String is formatted in ',' tuples. The value is the same value that the 'cenAlarmCategory' attribute holds. Contains one line description of the alarm category generated.

For a list of alarm types, see the 'Alarm Name column in the following documents. These are for 2.1 (Derecho). For other versions, use cisco.com published documentation for the version that you need.

Cisco Evolved Programmable Network Manager Supported SNMP Traps

Cisco Evolved Programmable Network Manager Supported Syslogs

Cisco Evolved Programmable Network Manager Supported TL1 Messages

Cisco Evolved Programmable Network Manager Supported Alarms

"LINK_DOWN", "SWT_AUTH_FAIL", "LINK_UP"

cenAlarmServerAddressType

InetAddressType

.1.3.6.1.4.9.9.311.1.1.2.1.11

The type of Internet address by which the server is reachable.

0: unknown

1:ipv4

2:ipv6

cenAlarmServerAddress

InetAddress

.1.3.6.1.4.9.9.311.1.1.2.1.12

The IP Address or the DNS name of the Management. Server that raised this alarm will be notified.

10.127.101.145

cenAlarmManagedObjectClass

SnmpAdminString

.1.3.6.1.4.9.9.311.1.1.2.1.13

The class of the managed object for which this alarm was generated. For example, Router, Switch, GateKeeper, and VoicePort.

For a list of categories, see the 'Category' column in the following documents. These are for 2.1 (Derecho). For other versions, use cisco.com published documentation for the version that you need.

Cisco Evolved Programmable Network Manager Supported SNMP Traps

Cisco Evolved Programmable Network Manager Supported Syslogs

Cisco Evolved Programmable Network Manager Supported TL1 Messages

Cisco Evolved Programmable Network Manager Supported Alarms

"Optical", "Carrier Ethernet"

cenAlarmManagedObjectAddressType

InetAddressType

.1.3.6.1.4.9.9.311.1.1.2.1.14

The type of Internet address by which the managed object is reachable.

0: unknown

1: ipv4

2: ipv6

cenAlarmManagedObjectAddress

InetAddress

.1.3.6.1.4.9.9.311.1.1.2.1.15

The IP Address or the DNS name of the Managed Object.

2405:200:204:138:172:30:9:121

cenAlarmDescription

OctetString

.1.3.6.1.4.9.9.311.1.1.2.1.16

A detailed description of the alarm.

For a list of alarm descriptions, see the 'Description/Probable Cause' column in the following documents. These are for 2.1 (Derecho). For other versions, use cisco.com published documentation for the version that you need.

Cisco Evolved Programmable Network Manager Supported SNMP Traps

Cisco Evolved Programmable Network Manager Supported Syslogs

Cisco Evolved Programmable Network Manager Supported TL1 Messages

Cisco Evolved Programmable Network Manager Supported Alarms

Port 'GigabitEthernet0/0/6' (Description: ' # TO GigabitEthernet0/0/7 #') is down on device '2405:200:204:138:172:30:9:121'.:Lost Carrier

cenAlarmSeverity

Integer

.1.3.6.1.4.9.9.311.1.1.2.1.17

The alarm severity indicates the severity of the alarm in integer value.

• 0—Critical

• 1—Major

• 2—Minor

• 3—Warning

• 4—Clear

• 5—Info

4

cenAlarmSeverityDefinition

SnmpAdminString

.1.3.6.1.4.9.9.311.1.1.2.1.18

The short description of the severity of the alarm

generated. The String is formatted in

',' tuples. The

value is the same value that the 'cenAlarmSeverity '

attribute holds. Contains one line

description of the alarm severity generated.

• 0—Critical

• 1—Major

• 2—Minor

• 3—Warning

• 4—Clear

• 5—Info

4.CLEARED

cenAlarmTriageValue

Integer

.1.3.6.1.4.9.9.311.1.1.2.1.19

The triage value of an alarm is a hierarchical weighting value (applied by the application, and more importantly customizable by the end user) to allow an artificial form of evaluating impact, interest, or other user-determined functions between alarms. The value is a positive number or zero, which denotes an undetermined or uncomputable value.

—

cenEventIDList

OctetString

.1.3.6.1.4.9.9.311.1.1.2.1.20

Comma separated list of the Unique Event identifiers that led to the generation of this Alarm.

—

cenUserMessage1

SnmpAdminString

.1.3.6.1.4.9.9.311.1.1.2.1.21

User input message. Information about the alarm including whether the alarm is a root cause alarm or a service - impacting alarm.

srcObjectDisplayName=GigabitEthernet0/0/0/18,
rootCauseId=0,
hostName=ASR9001-156.156.cisco,
serviceImpacting=0,
applicationSpecificAlarmID=LINK_DOWN:10.127.101.156:If: GigabitEthernet0/0/0/18##SubAlarm@@_7,
correlationType=UNKNOWN,
srcObjectBusinessKey=4c2b8aa7[1589721133_10.127.101.156,
GigabitEthernet0/0/0/18
chassisId = 0.

srcObjectDisplayName refers to the Location in EPNM UI. chassisId refers to Satellite Id in EPNMUI.
If any of the above information is not populated, then corresponding value is not sent to NBI.

—

cenUserMessage2

SnmpAdminString

.1.3.6.1.4.9.9.311.1.1.2.1.22

User input message. This value can be configured.

—

cenUserMessage3

SnmpAdminString

.1.3.6.1.4.9.9.311.1.1.2.1.23

User input message. This value can be configured.

—

cenAlarmMode

Integer

.1.3.6.1.4.9.9.311.1.1.2.1.24

• unknown(1) —When the value for this attribute could not be determined.

• alert(2) — Denotes an alarm generated by a set of events where all events are reported by polling of managed objects and/or listening to SNMP notifications.

• event(3) — Denotes an event generated by polling of managed objects and/or listening to SNMP notifications.

2

cenPartitionNumber

Integer

.1.3.6.1.4.9.9.311.1.1.2.1.24

In traps generated by the management application that support multiple partitions, the attribute will carry the integer value assigned to identify the logical group where the managed device resides.

0

cenPartitionName

SnmpAdminString

.1.3.6.1.4.9.9.311.1.1.2.1.26

In traps generated by the management application that support multiple partitions, the attribute will carry the name assigned to identify the logical group where the managed device resides.

—

cenCustomerIdentification

SnmpAdminString

.1.3.6.1.4.9.9.311.1.1.2.1.27

User input message. The attribute takes in a free format text. This attribute can be used by advanced management applications to sort responses from the fault management server.

—

cenCustomerRevision

SnmpAdminString

User input message. The attribute takes in a free format text. This attribute can be used by advanced management applications to sort responses from the fault management server.

—

cenAlertID

SnmpAdminString

.1.3.6.1.4.9.9.311.1.1.2.1.29

In event based notification, this attribute will contain the alert id to which the generated event has been rolled upto. In alert based notification, the cenAlarmInstanceId and cenAlertID will be identical.

1185098114