Introduction
This document contains the following information about Cisco Evolved Programmable Network Manager 7.0.0:
Functionality Added
This section lists the new features/functionalities delivered in Cisco EPN Manager 7.0.0.
GUI - General
-
Report export in XML format
-
Ability to export data from custom MIB reports
-
Support for large L3VPNs with more than 500 endpoints
-
Support for L2VPN to L3VPN mapping
Device Support
Support for:
-
NCS 540 (18X1G SFP + 6X1/10GSFP+) N540-6Z18G-SYS-A/D XR 7.8.1
-
IOS XR 7.8.1 and NCS5500/NCS5700
-
IOS XR 7.8.1 and Cisco 8000
-
IOS XR 7.8.1 and NCS540
-
IOS XR 7.8.1 and NCS560
-
IOS XR 7.8.1 and ASR9000 64bit
-
IOS XR 7.7.2 and Cisco 8000
-
IOS XR 7.7.2 and ASR9000
-
IOS XR 7.7.2 and NCS540
-
IOS XR 7.7.2 and NCS560
-
IOS XR 7.7.2 and NCS5500
-
IOS XR 7.7.2 and NCS5700
-
IOS XR 6.9.2 and ASR9K 32 bit
-
Cisco 8111-32EH for 7.8.1
-
Advantage(Full) on N520-X-20G4Z-A and IOS-XE 17.3.5
-
NCS1010 with topology discovery and visualization
-
NCS1010 NBI
-
NCS1004 2x400G line card with 400Ge NCS1K4-2-QDD-C-K9
-
Device model support for Catalyst 8000 and Catalyst 9000 (C8300-2N2S-4T2X Cisco Catalyst 8300 Series and C9300L-24P-4X Cisco Catalyst 9300L Stack Series)
Struts to Angular Migration
Menu |
Sub Menu |
Device Types |
---|---|---|
System |
Summary |
Cisco NCS 1000 Series, Cisco NCS 2000 Series, Cisco NCS 4000 Series |
System |
Memory |
Cisco NCS 1000 Series, Cisco NCS 2000 Series, Cisco NCS 4000 Series |
System |
Power options & Fans |
Cisco NCS 1000 Series, Cisco NCS 2000 Series, Cisco NCS 4000 Series, All Packet Devices |
System |
Modules |
Cisco NCS 1000 Series, Cisco NCS 2000 Series, Cisco NCS 4000 Series |
System |
Physical Ports |
Cisco NCS 1000 Series, Cisco NCS 2000 Series, Cisco NCS 4000 Series |
Interfaces |
All Interfaces |
Cisco NCS 1000 Series, Cisco NCS 2000 Series, Cisco NCS 4000 Series |
Interfaces |
WDM Side Interfaces |
Cisco NCS 1000 Series, Cisco NCS 2000 Series |
Interfaces |
SONET/SDH Interfaces |
Cisco NCS 2000 Series, Cisco NCS 4000 Series |
Interfaces |
Optics Interfaces |
Cisco NCS 2000 Series, Cisco NCS 4000 Series, Cisco ASR 9000 Series Aggregation Services Routers |
Interfaces |
Ethernet Interfaces |
Cisco NCS 1000 Series, Cisco NCS 2000 Series, Cisco NCS 4000 Series |
Interfaces |
IP Interfaces |
Cisco NCS 1000 Series, Cisco NCS 4000 Series, All Packet Devices |
Interfaces |
OTS-OCH Interfaces |
Cisco NCS 1000 Series |
Interfaces |
STS/VC Interfaces |
Cisco NCS 4000 Series |
Interfaces |
OTU Interfaces |
Cisco NCS 4000 Series, Cisco ASR 9000 Series Aggregation Services Routers |
Interfaces |
GCC Interfaces |
Cisco NCS 4000 Series |
Interfaces |
OCH Interfaces |
Cisco NCS 2000 Series |
Interfaces |
OTN Interfaces |
Cisco NCS 2000 Series |
Interfaces |
FC/FICON Interfaces |
Cisco NCS 2000 Series |
Interfaces |
Video Interfaces |
Cisco NCS 2000 Series |
Interfaces |
Data Storage Interfaces |
Cisco NCS 2000 Series |
Interfaces |
Coherent DSP Interface |
NCS1002, NCS1004 |
Interfaces |
ODU Interfaces |
NCS1004, NCS40XX |
Interfaces |
DWDM Controllers |
Cisco NCS 4000 Series, Cisco ASR 9000 Series Aggregation Services Routers |
Settings |
Loopback |
Cisco NCS 1000 Series, Cisco NCS 2000 Series, Cisco NCS 4000 Series, Cisco NCS 5500 Series, Cisco ASR 9000 Series Aggregation Services Routers, Cisco 82XX Router, Cisco NCS 55A2, Cisco NCS 540 Series Routers, Cisco NCS-57C1, Cisco NCS-57C3 |
Optical |
Automatic Laser Shutdown |
Cisco NCS 2000 Series |
Functionality Changes Including Removed/Disabled Features
Chassis View consolidation - always ON chassis view with merged logical and device details view (Logical View is removed, Logical View is merged with Device Details)
Following features/functionalities/Menus were deprecated in Cisco EPN Manager 6.1 and have been removed from Cisco EPN Manager 7.0.
-
Removal of support for setting GPS location for device groups
-
Topology Map functionality:
-
Grouping settings under system Settings
-
Hover information on links in Topology
-
Print\Save of map
-
Map dashlet
-
-
General Features:
-
Main Navigation Menu Options:
-
Administration>Dashboards> Job Dashboard> System Jobs - APIC-EM Integration
-
Administration>Dashboards> Job Dashboard>System Jobs - Assurance & Health summary
-
Administration>Dashboards> Job Dashboard> System Jobs - Wirecless Monitoring
-
Administration>Servers> ACS View Servers>ACS View Servers
-
Administration>Servers> APIC-EM Controller> APIC-EM Controller
-
Administration>Settings>Logging>SNMP Log
-
Administration>Settings>Logging>Syslog
-
Administration>Settings>Certificate> Certificate - System Key & Certificate
-
Administration>Settings> System Audit> System Audit
-
Administration>Settings> System Settings> General - Guest Account
-
Administration>Settings> System Settings> General - Help Us Improve
-
Administration>Settings> System Settings> General - Proxy
-
Administration>Settings> System Settings> General - Software Request
-
Administration>Settings> System Settings>General - Cisco DNAC Center
-
Administration>Settings> System Settings> Network & Device - CLI Session
-
Administration>Settings> System Settings> Network & Device - Controller Upgrade
-
Administration>Settings> System Settings> Network & Device - Unified AP Ping Reachability
-
Administration>Settings> System Settings> Network & Device - Plug & Play
-
Administration>Settings> System Settings> Switch Port Trace - Auto SPT
-
Administration>Settings> System Settings> Switch Port Trace - Manual SPT
-
Administration>Settings> System Settings> Switch Port Trace - SPT Configuration
-
Administration>Settings> System Settings> Switch Port Trace - Known Ethernet MAC
-
Administration>Settings> System Settings> Inventory - Datacenter Settings
-
Administration>Settings> System Settings> Client & User - All sub menu
-
Administration>Settings> System Settings> Services - Service Container Management
-
Configuration> Templates> Features and Technologies> Feature Templates
-
Configuration> Templates> Switch Location> Switch Location Table view
-
Configuration> Templates> Switch Location> Switch Location - Add Template
-
Configuration> Templates> Switch Location> Switch Location - Apply Template
-
Configuration> Templates> Scheduled Configuration Task> AP Template Tasks
-
Configuration> Templates> Scheduled Configuration Task> AP Template
-
Configuration> Templates> Scheduled Configuration Task> Config Group
-
Configuration> Templates> Scheduled Configuration Task> WLAN Configuration
-
Configuration> Templates> Scheduled Configuration Task> Download Software
-
Dashboard> Performance> BNG Statistics> BNG Statistics Dashboard TAB
-
Dashboard> Performance> ME1200 QoS> ME1200 QoS Dashboard TAB
-
Dashboard> Device Trends> Applications> Applications Trend Dashboard
-
-
Device Details:
-
Inventory>Device Management>Device Details>Device Details - CDP Neighbours
-
Inventory>Device Management>Device Details>Device Details - Civic Location
-
Inventory>Device Management>Device Details>Device Details - Spanning Tree
-
Inventory>Device Management>Device Details>Device Details - VTP
-
Inventory>Device Management>Device Details>Device Details - Stacks
-
Inventory>Device Management>Device Details>Device Details – VLANs
-
Inventory>Device Management>Device Details>STS/VC Interfaces
-
Inventory>Device Management>Device Details>Intra Node LMP
-
Inventory>Device Management> Configuration Archive> Config Archive Device Table - Deploy Config
-
Inventory>Device Management>Virtual Image Repository> Image Repository View
-
Inventory>Device Management> Network Audit
-
Inventory>Group Management>Port Groups>System Defined
-
-
Device Groups:
-
Device Groups>Location>All Locations>Civic Location
-
-
![]() Note |
Most of the device details mentioned are applicable for devices with essential license support. |
Device/OS Support Added
This section lists the new support provided in Cisco EPN Manager 7.0.0. For a list of all support information, click the gear icon at the top right of the web GUI and choose Help > Supported Devices.
Cisco Network Convergence System 1004 —New Operating System Support
Device Model | Device OS |
---|---|
Cisco NCS 1004 | IOS-XR 7.3.2 |
Cisco NCS 1004 | IOS-XR 7.5.1 |
Cisco NCS 1004 | IOS-XR 7.5.2 |
Cisco NCS 1004 | IOS-XR 7.7.1 |
Cisco NCS 1004 | IOS-XR 7.7.2 |
Cisco NCS 1004 | IOS-XR 7.8.1 |
Cisco NCS 1010 | IOS-XR 7.7.1 |
Supported Installation/Upgrade Paths
The following table lists the valid paths for installing/upgrading to Cisco EPN Manager 7.0.0 from previous versions.
Current Cisco EPN Manager Version |
Installation Path to Cisco EPN Manager 7.0.0 |
---|---|
Cisco EPN Manager 6.0.2 |
Cisco EPN Manager 6.0.2 > 7.0.0 |
Cisco EPN Manager 6.1.1 |
Cisco EPN Manager 6.1.1 > 7.0.0 |
See the relevant installation guide for installation prerequisites and procedures for Cisco EPN Manager versions.
For point patch installation instructions, see the readme file supplied with the patch file on the on the Software Download site on Cisco.com.
Important Notes
Cisco EPN Manager software is distributed with all the components necessary for its optimized and secure operation, including the Red Hat Linux operating system and the Oracle database. All security-related configurations, regression testing, performance, and scalability metrics are based on the set of components and configurations included in the original Cisco EPN Manager software distribution. Cisco provides periodic EPN Manager software updates that can also contain necessary updates to the packages installed on the operating system or to the database.
Note that if any of the following changes are made to the original distributed Cisco EPN Manager software, Cisco will no longer support the operating environment:
-
Configuration changes to the software or operating system, or installation of other components that are not part of the original distribution.
-
Direct installation and application of third-party software on the Red Hat Linux operating system embedded within Cisco EPN Manager.
-
Application of updates or patches that are not provided by Cisco to individual Cisco EPN Manager components.
-
Changes to the internal Cisco EPN Manager settings that are not documented as modifiable in the Cisco EPN Manager User and Administrator Guide on Cisco.com, as these changes may weaken security, disable functionality, or degrade scalability and performance.
Upgrade Issues
-
FTP and TPTP is disabled by default.
-
Active Threshold Crossing Alarms (TCA) for temperature remain active and are not cleared automatically. Please clear these alarms manually.
-
You must resync your devices to view ISIS links.
-
You must resync LDP-enabled devices to view LDP feature-related information.
-
You must recreate the TCAs for inbound/outbound errors and inbound/outbound discards in the Interface Health monitoring policy.
Limitations on Carrier Ethernet Circuit Provisioning
-
Promotion of service using old probe name format is now supported. These probes are listed in the user interface with the appropriate standard OAM Profile name after promotion.
-
Sample profile: profile PM2_3_8_CoS5_DM type cfm-delay-measurement.
-
While custom profile names are supported in EPN Manager, modifying brownfield services with a different naming format deletes the existing custom profile and adds a new profile with a supported naming format.
-
Inventory models do not correctly display the profiles that are not associated to a service.
-
Validation limit for number of profiles is 100. If you create a new SLA operation profile after 100 existing profiles, the device generates an error and deployment fails.
TLS 1.2 Required for Secured Channel Communication for HTTPS and TLS
Only Transport Layer Security (TLS) 1.2 is supported for HTTPS and TLS related secured communication, for example, RADIUS EAP-TLS.
Support for TLS 1.0, TLS 1.1, and all versions of SSL has been disabled due to security vulnerabilities.
This means that all peer systems and clients that transact with Cisco EPN Manager using HTTPS/TLS must support TLS 1.2. If they do not support TLS 1.2, you must upgrade these systems. Wherever possible, the Cisco EPN Manager documentation highlights the potentially affected systems. Please contact your Cisco representative for support in this regard, if necessary.
Reconciliation Report Limitations
If you have not provided a value for an attribute while provisioning a service, the provisioned value for that attribute is displayed as “Missing” in the reconciliation report. The device may have a default value for this attribute, but Cisco EPN Manager does configure this value.
Limitations on ME 1200 Devices
The Y.1564 performance test does not work if the source/destination is a ME 1200 device.
Limitations on Editing Alarm Notification Policies
If the upgrade conditions of existing categories are different from the condition of categories on 5.1, then the conditions post upgrade will not match. As a result, policy might not be created or UI selection might not take place for the unmatched events. In this case, you should delete the upgraded policies and create a new one.
Limitations on NCS 4200 Devices Running IOS-XE 16.8.1
The following functionalities do not work on NCS 4200 devices running IOS-XE 16.8.1:
-
Alarm profile
-
Configuration of SONET LOP and CT3 LOP from the GUI
-
Admin shut/no shut functionality on SONET/T1/T3 HOP/LOP
Limitations on NCS540 and NCS5500 devices
NCS540 and NCS5500 device series do not support Fault-OAM, Wrap-Protection and BFD.
Use CLI Templates for Configuring PTP Commands
On ASR920 devices with software version 16.9.1, IEEE 1588-2008 BC/MC license is required to execute the 1588 PTP commands.
Configuration and Inventory Not Supported for PTP Templates
The behavior of modeling the configurations pushed through PTP templates may not work as expected because the model may not be in place for all the configurations pushed through PTP templates. Configuration/Inventory is not supported for these configurations.
Deprecation of Support for ONS 10.00.10, 10.01.00, 10.03.00
ONS 10.00.10, 10.01.00, 10.03.00 ONS 10.00.10, 10.01.00, and 10.03.00 are no longer supported on Cisco NCS 2002, 2006 and 2015 devices.
Data Center Device Lifecycle Support Only
Cisco EPN Manager provides foundation lifecycle support for UCS compute systems, CSR 1000v, and Nexus series devices but does not provide data center topology.
LINK_DOWN alarm on sub interfaces in Gig Port
LINK_DOWN alarms will not be generated when link is down on sub interfaces in a Gig Port.
Cisco EPN Manager Bugs
Open Bugs
The table below lists the open bugs in Cisco EPN Manager Release 7.0.0 according to the following criteria:
-
Severity 1, 2, and high priority severity 3 open bugs
-
All open customer-found bugs
-
High-impact bugs that are likely to affect Cisco EPN Manager workflows.
Click the identifier link to view the impact and workaround for the bug in the Bug Search Tool. Use this tool to track the status of the open bugs.
Bugs | Description |
---|---|
CSCwe12754 |
NCS 1010 - Device manual sync is needed after enabling alarm manager settings |
CSCwc72060 |
CONTAININGEQUIPMENT_ID is null for many SFP containers on ASR9K |
CSCwd09949 |
EPN - model and report - transceivers not found or inaccurate in SFP report and NetworkInventory UI |
CSCwd22298 |
S2AAutomation>Administration>AAA>SSO SERVER>Add Self as SSO server not working |
CSCwc78979 |
Bellatrix: CoherentDSP is giving error in response post modify operation |
CSCwd12284 |
[GA]:UI partially or completely not displaying Coherent port if device admin status is changed |
CSCwe10728 |
Resource Pool collection error caused by Main Interface value populated in EthernetSubInterface |
CSCwe19705 |
CE-Update Scenario is failing for EVPN service - 7.0GA | 151C BUILD#595 |
CSCwe15015 |
7.0-GA and LA: L3VPN LSP OAM is failing |
Closed Bugs
The table below lists the closed bugs in Cisco EPN Manager Release 7.0.0.
Click the identifier link to view the impact and workaround for the bug in the Bug Search Tool. Use this tool to track the status of the bugs.
Bugs | Description |
---|---|
CSCvt83508 |
Support case in Troubleshoot option throws error |
CSCwb03234 | A-End or Z-End (icon) is not reading when it's in EDIT mode. |
CSCwc58205 | Circuit History page: Manually performed Protection Switch - Source says Automatic always |
CSCwd19383 | When LAG is configured in device it is shown under PAgP in EPNM instead of LACP. |
CSCwd20354 | [GA]EPNM does not have out of range validation for Bits per symbol,Baud rare |
CSCwd57812 | S2A Automation: Device Detail: All Interfaces - Sorting issue with page |
CSCwd64579 |
EPNM7.0LA/GA:Application Search is not working at EPNM main page |
CSCwe01956 | Generate Password is missed in Change Password and Users Page in GA |
Resolved Bugs
The table below lists the customer-found bugs that have been resolved in Cisco EPN Manager 7.0.0
For more information about the resolved bugs, go to the Bug Search Tool.
Bugs | Description |
---|---|
6.1.1 GA 140C - Sometimes Link Arrow showing wrong direction | |
EPN - alarm notification policy email sms mms gatway differences | |
info logging in InventoryMediationImpl java class writes huge data to log file | |
alarm notification policy select all followed by individual alarm unselect creates wrong policy |
|
Evaluation of cepnm for Spring4Shell vulnerability (CVE-2022-22965) |
|
EPNM retrieves huge result set from query in process New Update Alarm Records |
|
Smart license is deregistering shortly after registering with no reason, causing functionality loss |
|
7.O GA : Assurance logs takes up lot of disk space and also no roll over |
|
7.O GA : Switch inventory job stopped with inventory process failure message |
|
service-discovery-process stops processing data and crashed. |
|
EPN - HA - EPN start stall due to oracle adump folder |
|
CWW: Feature optical_interface failing on ASR9010 with lower IOSXR versions |
|
GET API on POST-triggered OTDR scan file works partially only after GUI OTDR scan data download |
|
Unable to delete the MCH NC SSON circuit after updating it |
|
Breakout port shown as opticsx/x/x/x instead of TenGigx/x/x/x on card NC55-24H12F-SE of NCS5504 |
|
line config in running-config is parsed incorrectly if line config are combined (RS232) |
|
DB_FLASHBACK_RETENTION_TARGET should be set to 360 in all setups |
|
Nesla gives wrong date in next auth date. need to backport cdet CSCwb16444 |
|
Edit optics controller page for QDD-ZRP, will have modulation and rate values that fail provisioning |
|
SOURCEIFINDEX and DESTINATIONIFINDEX are not populated correct in opticalCircuitInfo |
|
Northbound Traps for NCS category alarms are not forwarded to OSS |
|
reroute api issue - error message at the optical device/network should be propagated to upper layer |
|
CSCvz98965 is not resolved in 6.0 since wrong artifact is released xmp_snmp_sessionmgr-3.855.0.jar |
|
NCS2K Collection failure alarms were not cleared after the device moved to complete state |
|
MLT missing in-between circuit (OCH) |
|
Modify of circuit with restoration path is failing in EPNM |
|
NCS2K Collection failure alarms were not cleared after the device moved to complete state |
|
Backup and restore does not keep the users and repositories in the configuration |
|
Location flag is not set correctly on Remove Location action in Gio Map |
|
Topology ? OTS Link utilization ? Unused Wavelength filter not working as expected |
|
nms_sys_error log file is binary and increasing in size, making the file unreadable |
|
Unable to view MLT - Fails with msg-: Failed to load all routes |
|
Coherent DSP entry not added after re-configuring muxponder Mode card configuration on NCS1K device |
|
Ethernet status API returns wrong Lable/Unit |
|
Authentication failure alarm for snmp auth, shows Unknown as source instead the actual source |
|
UDF are not shown in network inventory detail report |
|
Max 5 Class-map display in \"QoS Class Map Policy Statistics\" dashlet of Interface dashboard |
|
EPN - alarm notification policy email sms mms gatway differences |
|
500 error returned by api/v4/data/InventoryDetails for SVO device |
|
Monitor/Monitoring Tools/Performance Graphs not loading for 1D, 1W for interafces |
|
Generate new certificate IP address range limited |
|
NTP is not running in EPNM 6.x by default |
|
Link name shown in UI not match to name defined by its creation through the topological-link API |
|
After upgrade of EPNM, non-root local user login is not listing devices in network devices list page |
|
Missing OTU link betw src/dest layers in MLT after ODU srvc restore/revert causing partial service |
|
Alarm hook does not match optical links |
|
Link 360 of a managed link (OCH) between 2 NCS1K that been cut, does not show any alarms |
|
Link 360 of a discovered OTS link between 2 NCS1K that got cut (Link Down) does not show any alarm |
|
IP address missing from /etc/hosts |
|
Alarm auto clear not working |
|
SVO devices with Credential profiles in SNMP Connectivity failed after nightly sync |
|
ifIndex isn't populated in PEP table for serialSubInterfaces |
|
Soft reset of NCS2K-TNCS-2O-K9 through chassis view for NCS 2006 not working |
|
Config archive rollback fails when device is in maintenance mode |
|
E1 serviceability is DOWN even after CONTROLLER-5-UPDOWN event has Cleared |
|
EPNM 6.1 FC - OTN-XP port 5 is mapped in port 0 chassis view |
|
Evaluation of multiple security vulnerabilities |
|
info logging in InventoryMediationImpl java class writes huge data to log file |
|
Modify X21 circuit generates no clock rate command even with no changes to the service attributes |
|
EPNM install fails when the RAM is very high(251 GB) |
|
Suppression of REPT_DBCHG-xxxxx events (TL1) still triggers Granular inventory |
|
Top Interface Utilization Tx/Rx Performance graphs throw error |
|
Stricter password policy enforcement |
|
HTTP headers vulnerability and exposure |
|
IPv4 and IPv6 ICMP redirect vulnerability |
|
EPNM does not stop config archive when a device is deleted from EPNM |
|
UDF is being appended to each hardware alarm multiple times. |
|
Longer column length of columns in VRFMATRIX_SFMLYSTTNGS4 table to accommodate for longer string |
|
Navigation menu Settings disappears after editing user group |
|
'Application Search' does not support raw device Config archive |
|
Optical SFP TX and RX values are showing zero values |
|
GI Is causing EPNM to crash in a certain scenario |
|
Incorrect operational Status for MPLS interface of XR devices |
|
EPNM does not creating WCS_VERY_LOW_DISK_SPACE, WCS_LOW_DISK_SPACE & NCS_VERY_LOW_DISK_SPACE |
|
EPNM does not creating WCS_VERY_LOW_DISK_SPACE, WCS_LOW_DISK_SPACE & NCS_VERY_LOW_DISK_SPACE |
|
Error while adding constraint to a MCHNC SSON with renamed OTS link |
|
Show all on job details page not working |
|
Null Pointer Exception from restconf and restAPI when using x509 certification |
|
EPNM: End-to-End performance dashlet is not loading properly |
|
Suppression of ROUTING-MPLS_TE-5-ACTIVE_LSP_SWITCH still triggers Granular inventory |
|
Image distribute to NCS 4216 failing because of wrong features loaded in device profile |
|
websocket client each disconnect will leak 1-M hashmap object in heap memory |
|
Resync of a partial legacy circuit bringing other circuits on the same device to partial |
|
Time axis is abnormally sifted in the CPU utilization graph on the Dashboard/Device Trends GUI |
|
Alarm Notification Policy - Using filter to search deselects all previous selections |
|
GET API downloaded OTDR (triggered by POST) SOR file name not the same as GUI export file name |
|
EPNM Feedback page still points to prime infrastructure mailer. |
|
cisco-resource-physical:node does not return complete data for multi chassis device |
|
missing, wrongly or inconsistent displayed unit label in interface 360 view for NCS 1004 |
|
inconsistency between EPNM and CTC on trunk port description change if it is used by active circuit |
|
In Users tables, the row number is put out on TAB-navigation onto the checkbox |
|
Aggregation tables for Optical PM are full with data when it should be empty |
|
UDF filtering, in network devices page, ignores group selection |
|
Wrong annotation on ports (mon,com,line) on OPT-AMP-17-C Faceplate for exact interface on ONS 15454 |
|
loopback pre-select issue for controller Ethernet or OTN configuration of NCS 1004 |
|
New device added by user in one Virtual domain show up in another user in different virtual domain |
|
EPN - install - temp folder not created after install |
|
show logging security |
|
Inventory / Device Management / Configuration Archive - Archive Available incorrect filtering |
|
no response on save for adding Muxponder Mode Card Configuration entry for NCS1K4-1.2T-L-K9 card |
|
Recover from split brain scenario does not recover vip |
|
epnm dashboard job count in metric and specific job category mismatch |
|
RS232 circuits discovery state in PARTIAL on link_down |
|
EPN - CARS - default access list should be added to other NICs |
|
SFP Module wrongly presented as Fiber instead of copper in ASR9k series in Report and Chassis View |
|
Image size column has incorrect values in Chassis-view - > Image tab |
|
Optical: Circuits table is empty on interfaces between OCH and OTU layers. |
|
ERROR in upgradehibernate_init.log - 'DiskStorageFactory - Disk Write' |
|
EPNM 6.0.2 Credential profile does not show up SSH details |
|
Config Archive page displays incorrect values for \"Latest Config Change\" |
|
SMU and ServicePack images are not activated when selected along with mini |
|
policyset description should be truncated or column should be increased |
|
EPNM 6.0.1.1 - SyncE Technology does not display when devices are configured with BDI interfaces |
|
EPNM sending space character every 5 mins |
|
EPN - nbi - unable to add device by nbi |
|
NB API online documentation is not updated |
|
Real time PM is not showing any data. Server is busy message is seen in the restconf |
|
Restconf: request for \"get All Port details for device\" has incorrect URI documented |
|
Topology link between NCS1001 is missing |
|
Devices to deploy is cleared on clicking next page of device selection in Configuration- >Templates |
|
The Favorites menu gets blocked out on the Optical PM Parameters page |
|
\"Optical Alarm\" of SYNTETIC_EVENT type does not display missing affected object / location link |
|
Unable to rename a Carrier NC SSON Circuit by adding '+' in it's name |
|
EPNM6.1: Radius Integrated User with \"Super Users\" role cannot see jobs |
|
interface Traffic and CRC reports showing duplicate entries for multiple devices |
|
ASR9006 goes to CWW state with failed feature as feature-mlacp. |
|
\"Abort long running job\" check box state does not get saved when creating user-defined inventory job |
|
Incorrect / Missing information in the EPNM 6.1.0 RESTCONF API Guide documentation. |
|
NCS2K : Duplicate \"Time Zone Settings\" menu item present in logical view |
|
filter on Serial Number in Network Inventory page dosn't work for 1000+ entries |
|
NCS2K - Unable to view configuration tab after hostname change. |
|
Groups not migrated when GroupNameAlias contains spaces |
|
ASR9K goes to collection failure after upgrading from 6.0 to 6.1.1 |
Get Information about Cisco EPN Manager Bugs
Use the Bug Search tool (BST) to get the latest information about Cisco EPN Manager bugs. BST allows partners and customers to search for software bugs based on product, release, and keyword, and it aggregates key data such as bug details, product, and version.
Cisco EPN Manager bugs may be caused by defects in a device's platform or operating system. In such cases, the Cisco EPN Manager bug will be resolved when the hardware/operating system bug is resolved.
Procedure
Step 1 |
Log into the Bug Search Tool.
|
||
Step 2 |
To list all bugs for this version, click the Select from list hyperlink that is next to the Product field and select the product.
You can also search using bug IDs or keywords. For more information, click Help at the top right of the Bug Search page. |
Related Documentation
For a list of all documentation available for Cisco EPN Manager 7.0.0, see the Cisco Evolved Programmable Network Manager 6.1 Documentation Overview.
Accessibility Features
For a list of accessibility features in Cisco EPN Manager 7.0.0, contact accessibility@cisco.com.
All product documents are accessible. If you would like to receive the product documentation in audio format, braille, or large print, contact accessibility@cisco.com
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, using the Cisco Bug Search Tool (BST), submitting a service request, and gathering additional information, see What’s New in Cisco Product Documentation.
Subscribe to What’s New in Cisco Product Documentation, which lists all new and revised Cisco technical documentation, as an RSS feed and deliver content directly to your desktop using a reader application. The RSS feeds are a free service.