This document provides an overview of the new and changed features in Cisco Prime Network Registrar 10.1.1, and describes how to access information about the known problems.
Note |
You can access the most current Cisco Prime Network Registrar documentation, including these release notes, online at: |
This document contains the following sections:
Introduction
Cisco Prime Network Registrar is comprised of these components:
-
An Authoritative Domain Name System (DNS) protocol service
-
A Caching DNS service
-
A Dynamic Host Configuration Protocol (DHCP) service
Cisco offers these components as individually licensed applications or in a mix of suites.
Before You Begin
Before you install Cisco Prime Network Registrar 10.1.1, review the system requirements and licensing information available in Cisco Prime Network Registrar 10.1 Installation Guide. Note that Cisco Prime Network Registrar 10.1.1 does not support Windows. Cisco Prime Network Registrar 10.1 was the last release to support Windows.
Note |
If you are migrating to Cisco Prime Network Registrar 10.1.1 from an earlier version of Cisco Prime Network Registrar, you must review the release notes for the releases that occurred in between, to fully understand all the changes. |
Cisco Prime Network Registrar DHCP, Authoritative DNS, and Caching DNS components are licensed and managed from the Cisco Prime Network Registrar regional server. All services in the local clusters are licensed through the regional cluster. Only a regional install requires a license file and only the regional server accepts new license files. Then the regional server can authorize individual local clusters, based on available licenses.
Note |
Licenses for Cisco Prime Network Registrar 9.x or earlier are not valid for Cisco Prime Network Registrar 10.x. You should have a new license for Cisco Prime Network Registrar 10.x. For the 10.x Regional, if one has 9.x CDNS clusters, the 9.x CDNS licenses must be added on the Regional server (9.x CDNS clusters will use 9.x licenses, 10.x CDNS clusters will use 10.x licenses). |
For more details about Licensing, see the "License Files" section in Cisco Prime Network Registrar 10.1 Installation Guide.
The Cisco Prime Network Registrar 10.1.1 kit contains the following files and directories:
-
Linux—CentOS/Red Hat Linux ES 6.5 and later 6.x or 7.x installation kit
-
Docs—Pointer card, Bugs, and Enhancement List
Note |
Cisco Prime Network Registrar 10.1.1 does not support RHEL/CentOS 8.x. |
The Cisco Prime Network Registrar also ships as a virtual appliance which includes all the functionality available in Cisco Prime Network Registrar along with the CentOS 7.7 operating system. The Cisco Prime Network Registrar virtual appliance is supported on VMware ESXi 6.x platforms, KVM Hypervisor, and OpenStack. For more details, see the "Cisco Prime Network Registrar Virtual Appliance" section in Cisco Prime Network Registrar 10.1 Installation Guide.
Licensing
Cisco Prime Network Registrar 10.1 license file contains two sets of licenses that cover the permanent and subscription parts of the license. The permanent licenses are similar to the licenses issued for 8.x and 9.x versions. For Cisco Prime Network Registrar 10.1.1, the licensing is done according to the services that you require. For more information, see the "License Files" section in Cisco Prime Network Registrar 10.1 Installation Guide.
Note |
You should not delete any of the individual licenses loaded from the file. If required, you may delete older versions of DNS and DHCP licenses after the upgrade. Older versions of CDNS licenses must be retained if the servers are not upgraded. |
Interoperability
Cisco Prime Network Registrar 10.1.1 uses individual component licenses. This allows users to purchase and install DHCP services, Authoritative DNS services, and Caching DNS services individually, or as a suite.
If you need additional DNS caching licenses, you should order them based on Server count since DNS caching is a server based license.
To install and manage DHCP, DNS, and Caching DNS licenses, you must establish a regional server. The regional server is used to install, count, and manage licensing for these components.
The synchronization between version 10.1 and pre-10.1 local clusters must be done from a 10.1 regional cluster. Cisco Prime Network Registrar 10.1.1 protocol servers interoperate with versions 8.3 or later.
Cisco Prime Network Registrar Bugs
For more information on a specific bug or to search all bugs in a particular Cisco Prime Network Registrar release, see Using the Bug Search Tool.
This section contains the following information:
Resolved Bugs
The following table lists the key issues resolved in the Cisco Prime Network Registrar 10.1.1 release.
Bug ID |
Description |
---|---|
CSCvs63153 |
If server reports client rejected offer, lease state incorrectly set to pending-available |
CSCvv19474 |
Dynamic scope management can result in out of request buffers |
DHCP server may crash after one partner upgraded to 10.1/10.1.0.1/10.1.0.2 |
|
Simultaneous requests using same user may return spurious results |
|
Regional CCM stops updating licensing and may become unresponsive |
|
Simultaneous logins for user returns AX_SCP_AUTHENTICATION_FAILED |
For the complete list of bugs for this release, see the cpnr_10_1_1_buglist.pdf file available at the product download site. See this list especially for information about fixes to customer-reported issues.
Enhancement Features
The following table lists the key enhancement features added in the Cisco Prime Network Registrar 10.1.1 release.
Bug ID |
Description |
---|---|
CSCvs54938 |
License showUtilization enhancement for regional |
CSCvt36593 |
Align DHCPv6 lease licensing counts with DHCPv4 |
AX_ENOSPC error is thrown when options of large size are added |
For the complete list of enhancement features added in this release, see the cpnr_10_1_1_enhancements.pdf file available at the product download site.
Using the Bug Search Tool
Use the Bug Search tool to search for a specific bug or to search for all bugs in a release.
Procedure
Step 1 | |||
Step 2 |
At the Log In screen, enter your registered Cisco.com username and password; then, click Log In. The Bug Search page opens.
|
||
Step 3 |
To search for a specific bug, enter the bug ID in the Search For field and press Return. |
||
Step 4 |
To search for bugs in the current release, click the Search Bugs tab and specify the following criteria:
|
Note |
To export the results to a spreadsheet, click the Export All to Spreadsheet link. |
Related Documentation
See Cisco Prime Network Registrar Documentation Overview for a list of Cisco Prime Network Registrar 10.1.1 guides.
Accessibility Features in Cisco Prime Network Registrar 10.1.1
All product documents are accessible except for images, graphics, and some charts. If you would like to receive the product documentation in audio format, braille, or large print, contact accessibility@cisco.com.
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, using the Cisco Bug Search Tool (BST), submitting a service request, and gathering additional information, see What's New in Cisco Product Documentation.
To receive new and revised Cisco technical content directly to your desktop, you can subscribe to the What's New in Cisco Product Documentation RSS feed. RSS feeds are a free service.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: https://www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1721R)
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.
© 2020 Cisco Systems, Inc. All rights reserved.