Cisco ASR 1001-HX Router and Cisco ASR 1002-HX Router Hardware Installation Guide

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents
Find Matches in This Book

Results

Updated:
October 13, 2016

Chapter: Overview

Overview

The Cisco ASR 1000 Series Aggregation Services Routers are mid-range edge routers that establish a new price-to-performance class offering benefits to both enterprise and service providers alike. The Cisco ASR 1000 Series Aggregation Services Routers portfolio is based on an innovative custom-built ASIC called Quantum Flow Processor that aggregates services at scale.

The Cisco ASR 1001-HX Router and Cisco ASR 1002-HX Router are a part of the Cisco ASR 1000 Series and offers a compact form factor that consumes less rack space and power while offering 100 Gbps forwarding throughput. The Cisco ASR 1001-HX Router and Cisco ASR 1002-HX Router support all the general-purpose routing and security features of the Cisco ASR 1000 Series Aggregation Services Routers.

Hardware Features

Front View

Slot Numbering

The Cisco ASR 1002-HX supports one Ethernet port adapter (EPA) in Bay 2 and one NIM in Bay 3 (for one single-wide or one double-wide NIM) .

The following figure shows slot numbering on the .

Figure 1. Slot Numbering


1

Bay 0—Subslot 0/0/n connected to the built-in 1GE SFP interfaces

3

Bay 2—Subslot 0/2/n connected to the EPA interfaces

See Supported EPAs.

2

Bay 1—Subslot 0/1/n connected to the built-in 10GE SFP+ interfaces

4

Bay 3—Subslot 0/3 connected to the NIM interfaces

Built-In SFP and SFP+ Ports

The following figure shows the port numbering for the built-in ports.

Figure 2. Port Numbering


1

Bay 0—The ports in Bay 0 use 1GE SFP transceivers and are labeled GE0 - GE7.

2

Figure 3. Port Numbering


1

Bay 0—The ports in Bay 0 use 1GE SFP transceivers and are labeled GE0 - GE7.

2

Bay 1— The ports in Bay 1 use 10GE SFP+ transceivers and are labeled TE0 - TE7.

3

Bay 2—EPA Slot


Note

Interfaces from 0 - 3 on both Bay 0 and Bay 1 on the and are enabled by default. Interfaces from 4 - 7 can be enabled by purchasing the Paired Port License.

The port LEDs behave as follows:

  • Off—Indicates the port is not enabled by software.

  • Amber—Indicates the port is enabled by software but there is a problem with the link.

  • Green—Indicates the port is enabled by software and there is valid link.


Note

On Cisco ASR1001-HX platform, 1G SFP or 10G SFP+ can be configured with dual-rate 10GE ports as follows:

  • 10G SFP+ on dual-rate 10GE Interface: Auto-negotiation protocol is not supported, and automatic negotiation cannot be configured using the negotiation auto command.

  • 1G SFP on dual-rate 10GE Interface: Auto-negotiation protocol is supported, and automatic negotiation can be configured using negotiation auto command. To disable auto negotiation, use no negotiation auto command.

Management and Storage Connections

The following figure shows the management and storage connections for the ASR 1002-HX Router.

Figure 4. Management and Storage Connections for the Cisco ASR 1002-HX Router


1

USB port 0

4

MGMT—RJ-45 10/100/1000 management Ethernet port.

2

USB port 1

5

CON—RJ-45/RS-232 compatible console port.

3

CON—Mini USB connector console port.

6

AUX—RJ-45/RS-232 compatible auxiliary port.

LEDs

The following figure shows the LEDs on the front panel of the Cisco ASR 1002-HX Router.

Figure 5. Cisco ASR 1002-HX LEDs


No.

LED Label

Description

Color

Behavior

1

STATUS

Status

Green

Cisco IOS has successfully booted.

Amber

The system is at ROMMON.

Red

System failure.

2

PWR

Power

Green

All the power supplies are within operational limits.

3

CRIT

Critical alarm

Red

Critical alarm indicator.

4

MAJ

Major alarm

Red

Major alarm indicator.

5

MIN

Minor alarm

Amber

Minor alarm indicator.

6

EN

USB console enable

Green

Indicates that the mini USB connector is used as the console.

Off

Indicates that the RJ-45 connector is being used as the console.

7

LINK

Management

Blinking green

Indicates the negotiated Ethernet speed (1 blink equals 10 Mbps, 2 blinks equals 100 Mbps, 3 blinks equals 1000 Mbps).

Off

Not connected.

8

BITS

Building Integrated Timing Supply (BITS)

Off

The BITS port is not supported in this software release.

9

IP-SEC

Crypto module

Green

Indicates the crypto module is present and operational.

Amber

Indicates the crypto module is present but inoperable.

Off

Indicates the crypto module is not installed.

Rear View

The following figure shows the rear of the .

Figure 6. Rear View


The chassis has a front-to-rear airflow. Four internal fans draw cooling air in through the front of the chassis and across internal components to maintain an acceptable operating temperature. The fans are located at the rear of the chassis. The fans are numbered from 0 to 3, right to left.

Cisco Product Identification Standard

This section describes the Cisco products and services product identification standard. This feature provides you with the ability to effectively integrate and manage Cisco products in your network and business operations.

Unique Device Identifier

The Unique Device Identifier (UDI) is the Cisco product identification standard for hardware products. A product identification standard removes barriers to enterprise automation and can help you reduce operating expenses.

The UDI provides a consistent electronic, physical, and associated business-to-business information product identification standard.

The UDI is a combination of five data elements. The following table lists the UDI elements.

Table 1. UDI Elements

UDI Data Element

Electronic Visibility

Physical Visibility

Description

PID

Yes

Yes

Product ID, also known as product name, model name, product number

VID

Yes

Yes

Version ID

SN

Yes

Yes

Serial number, the unique instance of the PID

Entity Name

Yes

—

Type, such as chassis, slot, or power supply

Product Description

Yes

—

Additional product information

The combination of serial number and product ID (PID) is unique and consistent across all Cisco products. The PID that is coded on hardware is called a base product identifier.

Additional orderable PIDs can be associated to a base PID. For instance, an orderable PID may describe a packaging configuration for a product or a bundled group of products sold, tested, and shipped together. Specific unique device identifier (UDI) benefits include the following:

  • Identifies:

    • Individual Cisco products in your networks

    • PIDs and serial numbers for service and replaceable products

    • Version IDs (VIDs) for product version visibility

  • Facilitates discovery of products subject to recall or upgrade

  • Enhances inventory automation of Cisco products

The Cisco product identification standard provides the following features:

  • Version visibility—Cisco continuously improves products through feature additions. Product changes are indicated by incrementing the VID, which provides version visibility to help you understand and manage product changes. VID management ensures consistency of changes from product to product.

  • Operating expense reduction—Cisco UDIs provide accurate and detailed network inventory information; identifying each Cisco product in a network element through a standard interface. Cisco operating systems can view and use this data, allowing you to automate your electronic inventory.

  • Consistency across product layers—The UDIs are embedded in the hardware products and cannot be overwritten. Operating and management systems discover UDIs through standard interfaces and display UDIs in standard outputs. Standard interfaces include the IETF standard ENTITY-MIB.

show diag chassis eeprom detail Command

The show diag chassis eeprom command displays the PID, VID, PCB serial number, hardware revision, and other such information.

The following is sample output from the show diag chassis eeprom command: 

Router# show diag chassis eeprom
MIDPLANE EEPROM data:

        Product Identifier (PID) : ASR1002-HX
        Version Identifier (VID) : V00
        PCB Serial Number        : JAE1931098U
        Top Assy. Part Number    : 68-5448-02
        Hardware Revision        : 0.3
        Asset ID                 :
        CLEI Code                : SAMPL00XYZ

Note

Common Language Equipment Identification (CLEI) code is a ten-digit character code that identifies a specific product. A CLEI code is applied to each part within a Cisco ASR1002-HX Router as they are programmed in manufacturing for shipment to customers.

show license udi Command

The show license udi command displays UDI information.

The following is sample output from the show license udi command: 

Router# show license udi

SlotID   PID                    SN                      UDI
--------------------------------------------------------------------------------
*        ASR1002-HX             JAE1931098U     ASR1002-HX:JAE1931098U

Note

For complete information on the product identification standard, see http://www.cisco.com/go/udi/.

Serial Number and PID/VID Label Location

The following figure shows the location of the serial number and the PID/VID label on the .

Figure 7. Cisco ASR 1002-HX Router Serial Number and PID/VID Label Location


1

Serial Number

2

PID/VID Label

Was this Document Helpful?

FeedbackFeedback

Contact Cisco