- Read Me First
- What's New in Cisco IOS XE (SD-WAN)
- Cisco Catalyst SD-WAN Basic System Overview
- Configure System Logging
- Configure User Access and Authentication
- Role Based Access Control
- Role-Based Access Control (Cisco IOS XE Catalyst SD-WAN Release 17.12.x and Earlier)
- Configure Devices
- Device Tagging
- Network Hierarchy and Resource Management
- Cisco Unified Communications Voice Services
- CUBE Configuration
- Configure Network Interfaces
- Hot Standby Router Protocol (HSRP)
- Configure a Cellular Gateway
- Configure Geofencing
- VRRP Interface Tracking
- Configure VDSL and G.SHDSL
- Dynamic On-Demand Tunnels
- Track Static Routes for Service VPNs
- NAT DIA Tracker for Cisco IOS XE Catalyst SD-WAN Devices
- Service-Side NAT on Cisco IOS XE Catalyst SD-WAN Devices
- DHCP Vendor Option Support
- IP DHCP Smart-Relay
- IPv6 Functionality
- IP Directed Broadcast
- Migrate Shared Templates to Cisco IOS XE Catalyst SD-WAN Templates
- CLI Templates for Cisco IOS XE Catalyst SD-WAN Devices
- CLI Add-On Feature Templates
- Cisco Catalyst SD-WAN EtherChannel
- Cisco Catalyst SD-WAN Multitenancy
- Flexible Tenant Placement on Multitenant Cisco Catalyst SD-WAN Controllers
- Multitenant WAN Edge Devices
- Cisco Catalyst SD-WAN Multitenancy (Cisco IOS XE Releases 17.4.x and 17.5.x)
- Cisco Catalyst SD-WAN Carrier Supporting Carrier
- Wireless Management on Cisco 1000 Series Integrated Services Routers
- Extended Visibility with Cisco SD-WAN and Cisco ThousandEyes
- Layer 2 VPN
- Troubleshoot Cisco Catalyst SD-WAN Systems and Interfaces
- Appendix: Cisco SD-WAN Manager How-Tos
Migrate Shared Templates to Cisco IOS XE Catalyst SD-WAN Templates
Note |
To achieve simplification and consistency, the Cisco SD-WAN solution has been rebranded as Cisco Catalyst SD-WAN. In addition, from Cisco IOS XE SD-WAN Release 17.12.1a and Cisco Catalyst SD-WAN Release 20.12.1, the following component changes are applicable: Cisco vManage to Cisco Catalyst SD-WAN Manager, Cisco vAnalytics to Cisco Catalyst SD-WAN Analytics, Cisco vBond to Cisco Catalyst SD-WAN Validator, Cisco vSmart to Cisco Catalyst SD-WAN Controller, and Cisco Controllers to Cisco Catalyst SD-WAN Control Components. See the latest Release Notes for a comprehensive list of all the component brand name changes. While we transition to the new names, some inconsistencies might be present in the documentation set because of a phased approach to the user interface updates of the software product. |
Overview
In Cisco vManage 20.1.1, support is added for for additional feature templates exclusively for Cisco IOS XE Catalyst SD-WAN devices.
In releases before Cisco vManage 20.1.1, when you created a template for both Cisco vEdge and Cisco IOS XE Catalyst SD-WAN devices, the same template is shared for both device types. For these templates, the configuration is specified using Cisco vEdge commands. If the template is then used with a Cisco IOS XE device, the configuration was converted for Cisco IOS XE devices. Due to this conversion of Cisco vEdge commands, some functionality was not unavailable for Cisco IOS XE Catalyst SD-WAN devices. For example, NAT DIA.
In these releases, there are two types of shared templates:
-
Shared feature templates: If you specify a Cisco IOS XE Catalyst SD-WAN device when creating a feature template, a shared feature template is created.
-
Shared device templates: A device template that contains a shared feature template.
In Cisco vManage 20.1.1 and onwards, feature templates have been separated for Cisco vEdge devices and Cisco IOS XE Catalyst SD-WAN devices. These feature templates that are exclusively created for Cisco IOS XE Catalyst SD-WAN devices enable support for additional features. To use these feature templates, you can migrate your shared feature templates to the exclusive templates.
List of Migrated Templates
The following table lists the shared templates and their corresponding exclusive templates for Cisco IOS XE Catalyst SD-WAN devices available in Cisco vManage 20.1.1 and onwards.
Note |
The AAA feature template is not supported with the exclusive Cisco IOS XE Catalyst SD-WAN device feature templates. If your existing template contains an AAA feature template, you can replace it either before migration or after migration:
|
Shared Feature Template |
Shared Template Type |
Exclusive Cisco IOS XE Catalyst SD-WAN Device Feature Template |
Exclusive Cisco IOS XE Catalyst SD-WAN Device Feature Template Type |
---|---|---|---|
Banner | banner | Cisco Banner | cisco_banner |
BFD | bfd-vedge | Cisco BFD | cisco_bfd |
BGP | bgp | Cisco BGP | cisco_bgp |
DHCP Server | dhcp-server | Cisco DHCP Server | cisco_dhcp_server |
Logging | logging | Cisco Logging | cisco_logging |
NTP | ntp | Cisco NTP | cisco_ntp |
OMP | omp-vedge | Cisco OMP | cisco_omp |
OSPF | ospf | Cisco OSPF | cisco_ospf |
Security | security-vedge | Cisco Security | cisco_security |
SNMP | snmp | Cisco SNMP | cisco_snmp |
System | system-vedge | Cisco System | cisco_system |
VPN Interface GRE | vpn-vedge-interface-gre | Cisco VPN Interface GRE | cisco_vpn_interface_gre |
VPN Interface IPsec | vpn-vedge-interface-ipsec | Cisco VPN Interface IPsec | cisco_vpn_interface_ipsec |
VPN Interface Ethernet | vpn-vedge-interface | Cisco VPN Interface Ethernet | cisco_vpn_interface |
VPN | vpn-vedge | Cisco VPN | cisco_vpn |
Migrate Shared Templates
You can continue using the older shared templates, however the shared templates may not have access to the latest features.
We recommend migrating existing templates to enable access to the latest features. For example, if you are using the VPN Interface Ethernet
shared template, the template still continues to work. However to use new features, such as NAT DIA, you must migrate to
the exclusive feature template called Cisco VPN Interface Ethernet
.
Migrate Shared Templates Using the Cisco SD-WAN Manager Migration Tool
Prerequisites:
-
At least one Cisco IOS XE Catalyst SD-WAN device template should exist with shared Cisco IOS XE Catalyst SD-WAN device feature templates attached prior to upgrading to Cisco vManage 20.1.1 or higher.
To migrate existing shared templates using Cisco SD-WAN Manager, perform the following steps:
-
From the Cisco SD-WAN Manager menu, choose .
-
Click Migrate All Templates.
-
Enter a prefix for the new migrated templates. For example
Migrated_
. All migrated templates are prefixed with this identifier. -
To migrate the templates, click OK.
-
Once the migration begins, click Tasks to track the status of the migration.
-
Once the migration is complete, you must manually attach the migrated templates to your devices. For each of the migrated templates, click ... and choose Attach Devices to Migrated Template.