Cisco Security Analytics and Logging

About Security Analytics and Logging (SaaS) in Security Cloud Control

Cisco Security Analytics and Logging (SAL) allows you to capture connection, intrusion, file, malware, security intelligence, syslog, and Netflow Secure Event Logging (NSEL) events from all of your ASA and Secure Firewall Threat Defense devices and view them in one place in Security Cloud Control. The events are stored in the Cisco cloud and viewable from the Event Logging page in Security Cloud Control, where you can filter and review them to gain a clear understanding of what security rules are triggering in your network.

With additional licensing, after you capture these events, you can cross-launch from Security Cloud Control to a Secure Cloud Analytics portal provisioned for you. Secure Cloud Analytics is a software as a service (SaaS) solution that tracks the state of your network by performing a behavioral analysis on events and network flow data. By gathering information about your network traffic from sources including firewall events and network flow data, it creates observations about the traffic and automatically identifies roles for network entities based on their traffic patterns. Using this information combined with other sources of threat intelligence, such as Talos, Secure Cloud Analytics generates alerts, which constitute a warning that there is behavior that may be malicious in nature. Along with the alerts, Secure Cloud Analytics provides network and host visibility, and contextual information it has gathered to provide you with a better basis to research the alert and locate sources of malicious behavior.

Terminology Note: In this documentation, when Cisco Security Analytics and Logging is used with the Secure Cloud Analytics portal (a software as a service product) you will see this integration referred to as Cisco Security Analytics and Logging (SaaS) or SAL (SaaS).

Event Types in Security Cloud Control

When filtering ASA and Secure Firewall Threat Defense events logged by Secure Logging Analytics (SaaS), you can choose from a list of ASA and FTD event types that Security Cloud Control supports. From the Security Cloud Control menu, navigate Analytics > Event Logging and click the filter icon to choose events. These event types represent groups of syslog IDs. The table that follows shows which syslog IDs are included in which event type. If you want to learn more about a specific syslog ID, you can search for it in the Cisco ASA Series Syslog Messages or the Cisco Secure Firewall Threat Defense Syslog Messages guides.

Some syslog events have the additional attribute "EventName." You can filter the events table to find events using the EventName attribute by filtering by attribute:value pairs. See Event Name Attributes for Syslog Events.

Some syslog events will have the additional attributes "EventGroup" and "EventGroupDefinition". You will be able to filter the events table to find events using these additional attributes by filtering by attribute:value pairs. See EventGroup and EventGroupDefinition Attributes for Some Syslog Messages.

The NetFlow events are different from syslog events. The NetFlow filter searches for all NetFlow event IDs that resulted in an NSEL record. Those NetFlow event IDs are defined in the Cisco ASA NetFlow Implementation Guide.

The following table describes the event types that Security Cloud Control supports and lists the syslog or NetFlow event numbers that correspond to the event types:

Filter Name

Description

Corresponding Syslog Event or Netflow Event

AAA

These are events that the system generates when failed or invalid attempts happen to authenticate, authorize, or use up resources in the network, when AAA is configured.

109001-109035

113001-113027

BotNet

These events get logged when a user attempts to access a malicious network, which might contain a malware-infected host, possibly a BotNet, or when the system detects traffic to or from a domain or an IP address in the dynamic filter block list.

338001-338310

Failover

These events get logged when the system detects errors in stateful and stateless failover configurations or errors in the secondary firewall unit when a failover occurs.

101001-101005, 102001, 103001-103007, 104001-104004, 105001-105048

210001-210022

311001-311004

709001-709007

Firewall Denied

These events get generated when the firewall system denies traffic of a network packet for various reasons, ranging from a packet drop because of the security policy to a drop because the system received a packet with the same source IP and destination IP, which could potentially mean an attack on the network.

Firewall Denied events may be contained in a NetFlow and may be reported with NetFlow event IDs as well as syslog IDs.

106001, 106007, 106012, 106013, 106015, 106016, 106017, 106020, 106021, 106022, 106023, 106025, 106027

Firewall Traffic

These are events that get logged depending on the various connection attempts in the network, user identities, time stamps, terminated sessions, and so on.

Firewall Traffic events may be contained in a NetFlow and may be reported with NetFlow event IDs as well as syslog IDs.

106001-106100, 108001-108007, 110002-110003

201002-201013, 209003-209005, 215001

302002-302304, 302022-302027, 303002-303005, 313001-313008, 317001-317006, 324000-324301, 337001-337009

400001-400050, 401001-401005, 406001-406003, 407001-407003, 408001-408003, 415001-415020, 416001, 418001-418002, 419001-419003, 424001-424002, 431001-431002, 450001

500001-500005, 508001-508002

607001-607003, 608001-608005, 609001-609002, 616001

703001-703003, 726001

IPsec VPN

These events are logged in an IPsec VPN-configured firewall when mismatches occur in IPsec security associations or when the system detects an error in the IPsec packets it receives.

402001-402148, 602102-602305, 702304-702307

NAT

These events are logged in a NAT-configured firewall when NAT entries are created or deleted and when all the addresses in a NAT pool are used up and exhausted.

201002-201013, 202001-202011, 305005-305012

SSL VPN

These events are logged in an SSL VPN-configurated firewall when WebVPN sessions get created or terminated, user access errors, and user activities.

716001-716060, 722001-722053, 723001-723014, 724001-724004, 725001-725015

NetFlow

These events are logged around the IP network traffic as network packets enter and exit the interfaces, timestamps, user identities, and the amount of data transferred.

0, 1, 2, 3, 5

Connection

You can generate events for connections as users generate traffic that passes through the system. Enable connection logging on access rules to generate these events. You can also enable logging on Security Intelligence policies and SSL decryption rules to generate connection events.

Connection events contain data about the detected sessions. The information available for any individual connection event depends on several factors, but in general includes:

  • Basic connection properties: timestamp, source and destination IP address, ingress and egress zones, the device that handled the connection, and so on.

  • Additional connection properties discovered or inferred by the system: applications, requested URLs, or users associated with the connection, and so on.

  • Metadata about why the connection was logged: which configuration handled the traffic, whether the connection was allowed or blocked, details about encrypted and decrypted connections, and so on.

430002, 430003

Intrusion

The system examines the packets that traverse your network for malicious activity that could affect the availability, integrity, and confidentiality of a host and its data. When the system identifies a possible intrusion, it generates an intrusion event, which is a record of the date, time, type of exploit, and contextual information about the source of the attack and its target. Intrusion events are generated for any intrusion rule set to block or alert, regardless of the logging configuration of the invoking access control rule.

430001

File

File events represent files that the system detected, and optionally blocked, in network traffic based on your file policies. You must enable file logging on the access rule that applies the file policy to generate these events.

When the system generates a file event, the system also logs the end of the associated connection regardless of the logging configuration of the invoking access control rule.

430004

Malware

The system can detect malware in network traffic as part of your overall access control configuration. AMP for Firepower can generate a malware event, containing the disposition of the resulting event, and contextual data about how, where, and when the malware was detected. You must enable file logging on the access rule that applies the file policy to generate these events.

The disposition of a file can change, for example, from clean to malware or from malware to clean. If AMP for Firepower queries the AMP cloud about a file, and the cloud determines the disposition has changed within a week of the query, the system generates retrospective malware events.

430005

Security Intelligence

Security Intelligence events are a type of connection event generated by the Security Intelligence policy for each connection that is blocked or monitored by the policy. All Security Intelligence events have a populated Security Intelligence Category field.

For each of these events, there is a corresponding "regular" connection event. Because the Security Intelligence policy is evaluated before many other security policies, including access control, when a connection is blocked by Security Intelligence, the resulting event does not contain the information that the system would have gathered from subsequent evaluation, for example, user identity.

430002, 430003

Secure Logging Analytics for FDM-Managed Devices

Cisco Security Analytics and Logging (SaaS) allows you to capture connection, intrusion, file, malware, and Security Intelligence events from all of your FDM-managed devices and view them in one place in Security Cloud Control.

The events are stored in the Cisco cloud and viewable from the Event Logging page in Security Cloud Control where you can filter and review them to gain a clear understanding of what security rules are triggering in your network. The Logging and Troubleshooting package gives you these capabilities.

With the Logging Analytics and Detection package (formerly Firewall Analytics and Logging package), the system can apply Secure Cloud Analytics dynamic entity modeling to your FDM-managed device events, and use behavioral modeling analytics to generate Secure Cloud Analytics observations and alerts. If you obtain a Total Network Analytics and Monitoring package, the system applies dynamic entity modeling to both your FDM-managed device events and your network traffic, and generates observations and alerts. You can cross-launch from Security Cloud Control to a Cisco Secure Cloud Analytics portal provisioned for you, using Cisco Single Sign-On.

How FDM Events are Displayed in the Security Cloud Control Events Viewer

Connection, intrusion, file, malware, and Security Intelligence events are generated when an individual rule is configured to log events and network traffic matches the rule criteria. After the events are stored in the Cisco cloud, you can view them in Security Cloud Control. There are two methods of configuring your FDM-managed device to send events to the Cisco cloud:

  • You can install multiple Secure Event Connectors (SECs) and send events generated by a rule, on any device, to any of the SECs as if it were a syslog server. The SEC then forwards the event to the Cisco cloud.

  • If your FDM-managed device was onboarded to Security Cloud Control using a registration key, you can send events directly to the Cisco cloud using a control in the Secure Firewall device manager.

How an Event is Sent to the Cisco Cloud Using the Secure Event Connector

With the basic Logging and Troubleshooting license, this is how a Secure Firewall device manager event reaches the Cisco cloud:

  1. You onboard your FDM-managed device to Security Cloud Control using username and password or by using a registration key.

  2. You configure individual rules, such as access control rules, Security Intelligence rules, and SSL decryption rules, to forward events to any one of your SECs as if it were a syslog server. In access control rules, you can also enable file and malware policies, and intrusion policies, and forward events generated by those polices to the SEC.

  3. You configure File/Malware logging in System Settings > Logging for file events.

  4. You configure Intrusion Logging in System Settings > Logging for intrusion events.

  5. The SEC forwards the events to the Cisco cloud where the events are stored.

  6. Security Cloud Control displays events from the Cisco cloud in its Events Logging page based on the filters you set.

With the Logging Analytics and Detection or Total Network Analytics and Monitoring license, the following also occur:

  1. Cisco Secure Cloud Analytics applies analytics to the Secure Firewall device manager connection events stored in the Cisco cloud.

  2. Generated observations and alerts are accessible from the Secure Cloud Analytics portal associated with your Security Cloud Control portal.

  3. From the Security Cloud Control portal, you can cross-launch your Secure Cloud Analytics portal to review these observations and alerts.

How Events are Sent Directly from an Secure Firewall device manager to the Cisco Cloud

With the basic Logging and Troubleshooting license, this is how Secure Firewall device manager events reach the Cisco cloud:

  1. You onboard your FDM-managed device to Security Cloud Control using a registration token.

  2. You configure individual rules, such as access control rules, Security Intelligence rules, and SSL decryption rules, to log events but you don't specify a syslog server for them to be sent to. In access control rules, you can also enable file and malware policies and intrusion policies, and forward events generated by those polices to the Cisco cloud.

  3. File events and Intrusion events are sent to the Cisco cloud if file and malware policies and intrusion policies are configured in the access control rules to log connection events.

  4. You activate Cloud Logging on the Secure Firewall device manager and the events logged in the various rules are sent to the Cisco cloud.

  5. Security Cloud Control pulls events from the Cisco cloud based on the filters you set and displays them in its Events viewer.

With the Logging Analytics and Detection or Total Network Analytics and Monitoring license, the following also occur:

  1. Cisco Secure Cloud Analytics applies analytics to the Secure Firewall device manager connection events stored in the Cisco cloud.

  2. Generated observations and alerts are accessible from the Secure Cloud Analytics portal associated with your Security Cloud Control portal.

  3. From the Security Cloud Control portal, you can cross-launch your Secure Cloud Analytics portal to review these observations and alerts.

Configuration Comparison

Here is a summary of the Security Cloud Control configuration differences between sending events to the Cisco cloud through an SEC and sending events directly to the Cisco cloud.

FDM-Managed Device Configuration

When Sending Events through a Secure Event Connector (SEC)

When Sending Events Directly to Cisco Cloud

Security Cloud Control onboarding method for FDM-Managed Device

Credentials (Username and password)

Registration token

Registration token

Serial Number

Version Support

Version 6.4+

Registration Token - Version 6.5+

Serial Number - Version 6.7+

Cisco Security Analytics and Logging (SaaS) Licenses

Logging and Troubleshooting

Logging Analytics and Detection (optional)

Total Network Analytics and Monitoring (optional)

Logging and Troubleshooting

Logging Analytics and Detection (optional)

Total Network Analytics and Monitoring (optional)

Licenses

license

-If you want to collect connection events from intrusion rules, file control rules, or security intelligence filtering.

Malware-If you want to collect connection events from file control rules.

license

-If you want to collect connection events from intrusion rules, file control rules, or security intelligence filtering.

Malware-If you want to collect connection events from file control rules.

Secure Event Connector

Required

N/A

Data Compression*

Events are compressed*

Events are not compressed*

Data Plan

Required

Required


Note


Data subscriptions and your Historical Monthly Usage are based on the amount uncompressed data you use.


Components in the Solution

Cisco Security Analytics and Logging (SaaS) uses these components to deliver events to Security Cloud Control:

Secure Device Connector (SDC)-The SDC connects Security Cloud Control to your FDM-managed devices. The login credentials for the FDM-managed devices are stored on the SDC. See Secure Device Connector for more information.

Secure Event Connector (SEC)-The SEC is an application that receives events from your FDM-managed devices and forwards them to the Cisco cloud. Once in the Cisco cloud, you can view the events on Security Cloud Control's Event Logging page or analyze them with Cisco Secure Cloud Analytics. You may have one or more SECs associated with your tenant. Depending on your environment, you install the Secure Event Connector on a Secure Device Connector or a Security Cloud Control Connector VM.

Secure Firewall device manager-The FDM-managed device is Cisco's next generation firewall. Beyond stateful inspection of network traffic and access control, the FDM-managed device provides capabilities such as protection from malware and application-layer attacks, integrated intrusion prevention, and cloud-delivered threat intelligence.

If you have a Logging Analytics and Detection or Total Network Analytics and Monitoring license, Cisco Security Analytics and Logging (SaaS) uses Cisco Secure Cloud Analytics to further analyze events delivered to Security Cloud Control.

Cisco Secure Cloud Analytics-Secure Cloud Analytics applies dynamic entity modeling to events, generating detections based on this information. This provides a deeper analysis of telemetry gathered from your network, allowing you to identify trends and examine anomalous behavior in your network traffic.

Licensing

To configure this solution you need the following accounts and licenses:

Security Cloud Control. You must have a Security Cloud Control tenant.

Secure Device Connector. There is no separate license for a SDC.

Secure Event Connector. There is no separate license for a SEC.

Secure Logging Analytics (SaaS). You need to buy the Logging and Troubleshooting license. The goal of this package is to provide network operations teams with real-time and historical events derived from their on-boarded FDM-managed devices for the purposes of troubleshooting and analyzing traffic in their network.

You can also buy a Logging Analytics and Detection or Total Network Analytics and Monitoring license to apply Cisco Secure Cloud Analytics. The goal of these packages is to provide network operations teams additional insight into the events (and network traffic with the Total Network Analytics and Monitoring license) to better identify possible anomalous behavior and respond to it.

License Name

Provided Functionality

Available License Durations

Functionality Prerequisites

Logging and Troubleshooting

View events and event detail within Security Cloud Control, both as a live feed and as a historical view

  • 1 year

  • 3 years

  • 5 years

  • Security Cloud Control

  • An on-premises deployment running version 6.4 or later

    .
  • Deployment of one or more SECs to pass events to the cloud

Logging Analytics and Detection (formerly Firewall Analytics and Monitoring)

Logging and Troubleshootingfunctionality, plus:

  • Apply dynamic entity modeling and behavioral analytics to your FDM-managed device events

  • Open alerts in Secure Cloud Analytics based on event data, cross-launching from the Security Cloud Control event viewer

  • 1 year

  • 3 years

  • 5 years

  • Security Cloud Control

  • An on-premises deployment running version 6.4 or later.

  • Deployment of one or more SECs to pass events to the cloud.

  • A newly provisioned or existing Secure Cloud Analytics portal.

Total Network Analytics and Monitoring

Logging Analytics and Detection, plus:

  • Apply dynamic entity modeling and behavioral analytics to events, on-premises network traffic, and cloud-based network traffic.

  • Open alerts in Secure Cloud Analytics based on the combination of event data, on-premises network traffic flow data collected by Secure Cloud Analytics sensors, and cloud-based network traffic passed to Secure Cloud Analytics, cross-launching from the Security Cloud Control event viewer.

  • 1 year

  • 3 years

  • 5 years

  • Security Cloud Control

  • An on-premises deployment running version 6.4 or later

    .
  • Deployment of one or more SECs to pass events to the cloud

    .
  • Deployment of at least one Secure Cloud Analytics sensor version 4.1 or later to pass network traffic flow data to the cloud OR integrating Secure Cloud Analytics with a cloud-based deployment, to pass network traffic flow data to Secure Cloud Analytics.

  • A newly provisioned or existing Secure Cloud Analytics portal.

FDM-Managed Device. You need to have the following licenses to run the FDM-managed device and create rules that generate security events:

License

Duration

Granted Capabilities

Essentials(automatically included)

Perpetual

All features not covered by the optional term licenses.

You must also specify whether to Allow export-controlled functionality on the products registered with this token. You can select this option only if your country meets export-control standards. This option controls your use of advanced encryption and the features that require advanced encryption.

Term-based

Intrusion detection and prevention-Intrusion policies analyze network traffic for intrusions and exploits and, optionally, drop offending packets.

File control-File policies detect and, optionally, block users from uploading (sending) or downloading (receiving) files of specific types. AMP for Firepower, which requires a Malware license, allows you to inspect and block files that contain malware. You must have the Threat license to use any type of File policy.

Security Intelligence filtering-Drop selected traffic before the traffic is subjected to analysis by access control rules. Dynamic feeds allow you to immediately drop connections based on the latest intelligence.

Malware

Term-based

File policies that check for malware, which use Cisco Advanced Malware Protection (AMP) with AMP for Firepower (network-based Advanced Malware Protection) and Cisco Threat Grid.

File policies can detect and block malware in files transmitted over your network.

Data Plans

You need to buy a data storage plan that reflects the number of events the Cisco cloud receives from your on-boarded FDM-managed devices on a daily basis. The best way to determine your ingest rate is to participate in a free trial of Secure Logging Analytics (SaaS) (SaaS) before you buy it. This will give you a good estimate of your event volume. In addition, you can use the Logging Volume Estimator Tool.


Caution


It is possible to configure your FDM-managed device to send events to the Cisco cloud directly and by way of the SEC simultaneously. If you do this, the same event will be "ingested" twice and counted against your data plan twice, though it will only be stored in the Cisco cloud once. Be careful to send events to the Cisco cloud using one method or the other to avoid incurring unnecessary fees.


Data plans are available in 1 GB daily volumes increments, and in 1, 3 or 5 year terms. See the Secure Logging Analytics (SaaS) Ordering Guide for information about data plans.


Note


If you have a Security Analytics and Logging license and data plan, then obtain a different license at a later date, that alone does not require you to obtain a different data plan. If your network traffic throughput changes and you obtain a different data plan, that alone does not require you to obtain a different Security Analytics and Logging license.


30-day Free Trial

You can request a 30-day risk-free trial by logging in to Security Cloud Control and navigating to Events & Logs > Events. On completion of the 30-day trial, you can order the desired event data volume to continue the service from Cisco Commerce Workspace (CCW), by following the instructions in the Secure Logging Analytics (SaaS) ordering guide.

What to do next?

Continue with Implementing Secure Logging Analytics (SaaS) for FDM-Managed Devices.

Implementing Secure Logging Analytics (SaaS) for FDM-Managed Devices

Before you Begin

  • Review Secure Logging Analytics for FDM-Managed Devices to learn about:

    • How events are sent to the Cisco cloud

    • Applications in the solution

    • Licenses you need

    • Data plan you need

  • You have contacted your managed service provider or Security Cloud Control Sales representative and you have a Security Cloud Control tenant.

  • Your tenant may or may not use an Secure Device Connector (SDC) for Security Cloud Control to connect with your FDM-managed devices. Your tenant should have an SDC installed for those FDM-managed devices that you onboard with device credentials, it is considered a best practice. If you onboard your FDM-managed devices with registration key or serial number you do not need an SDC.

  • If you have installed an SDC for your tenant, ensure your SDC status is Active and has recorded a recent heartbeat.

  • If you are installing an SDC:

  • You can install more than one SEC for your tenant and you can send events from any Firewall device manager to any one SEC onboarded to your tenant.

  • If you are sending events directly to the Cisco cloud from the firewall device manager, you have opened up outbound access on port 443 on the management interface.

  • You have established two-factor authentication for users of your account.

New Security Cloud Control Customer Workflow to Implement Secure Logging Analytics (Saas) and Send Events through the Secure Event Connector to the Cisco Cloud

  1. Onboard your FDM-Managed Devices. You can onboard the device with the admin username and password or with a registration token.

  2. Create a Syslog Server Object for Secure Logging Analytics (SaaS).

  3. Configure the FDM-Managed Device Policy to log connection events.

  4. Configure your FDM-managed device to Send events generated by rules and policies to the Secure Event Connector.

  5. Confirm events are visible in Security Cloud Control. From the navigation bar, select Events & Logs > Events. Click the Live tab to view live events.

  6. If you have a Logging Analytics and Detection or Total Network Analytics and Monitoring license, continue with Analyzing Events in Cisco Secure Cloud Analytics.

New Security Cloud Control Customer Workflow to Implement Secure Logging Analytics (SaaS) and Send Events Directly to the Cisco Cloud

  1. Onboard your FDM-Managed Devices. You can only use a registration key.

  2. Configure the FDM-Managed Device Policy to log connection events.

  3. Configure your FDM-managed device to send events directly to the Cisco cloud.

  4. Confirm events are visible in Security Cloud Control. From the navigation bar, select Events & Logs > Events. Click the Live tab to view live events.

  5. If you have a Logging Analytics and Detection or Total Network Analytics and Monitoring license, continue with Analyzing Events in Cisco Secure Cloud Analytics.

Existing Security Cloud Control Customer Workflow to Implement Secure Logging Analytics (SaaS) and Send Events through the Secure Event Connector to the Cisco Cloud

  1. Onboard your FDM-Managed Devices. You can onboard the device with the admin username and password or with a registration token.

  2. Syslog Server Object for Secure Logging Analytics (SaaS).

  3. Configure the FDM-Managed Device Policy to log connection events.

  4. Send events generated by rules and policies to the Secure Event Connector.

  5. Confirm events are visible in Security Cloud Control. From the navigation bar, select Events & Logs > Events. Click the Live tab to view live events.

  6. If you have a Logging Analytics and Detection or Total Network Analytics and Monitoring license, continue with Analyzing Events in Cisco Secure Cloud Analytics.

Existing Security Cloud Control Customer Workflow to Implement Secure Logging Analytics (SaaS) and Send Events Directly to the Cisco Cloud

  1. Onboard your FDM-Managed Devices. You can only use a registration key.

  2. Configure the FDM-Managed Device Policy to log connection events.

  3. Configure your FDM-managed device to send events directly to the Cisco cloud.

  4. Confirm events are visible in Security Cloud Control. From the navigation bar, select Events & Logs > Events. Click the Live tab to view live events.

  5. If you have a Logging Analytics and Detection or Total Network Analytics and Monitoring license, continue with Analyzing Events in Cisco Secure Cloud Analytics.

Analyzing Events in Cisco Secure Cloud Analytics

If you have a Logging Analytics and Detection or Total Network Analytics and Monitoring license, perform the following in addition to the previous steps:

  1. Provision a Cisco Secure Cloud Analytics Portal.

  2. Deploy one or more Secure Cloud Analytics sensors to your internal network if you purchased a Total Network and Monitoring license. See Cisco Secure Cloud Analytics Sensor Deployment for Total Network Analytics and Reporting.

  3. Invite users to create Secure Cloud Analytics user accounts, tied to their Cisco Single Sign-On credentials. See Viewing Cisco Secure Cloud Analytics Alerts from Security Cloud Control.

  4. Cross-launch from Security Cloud Control to Secure Cloud Analytics to monitor the Secure Cloud Analytics alerts generated from firewall device manager events. See Viewing Cisco Secure Cloud Analytics Alerts from Security Cloud Control.

Reviewing Secure Cloud Analytics Alerts by Cross-launching from Security Cloud Control

With a Logging Analytics and Detection or Total Network Analytics and Monitoring license, you can cross-launch from Security Cloud Control to Secure Cloud Analytics to review the alerts generated by Secure Cloud Analytics, based on firewall device manager events.

Review these articles for more information:

Secure Analytics and Logging (SaaS) Workflows

Troubleshooting Using Security and Analytics Logging Events describes using the events generated from Secure Logging Analytics (SaaS) to determine why a user can't access a network resource.

See also Working with Alerts Based on FDM Events.

Send FDM Events to Security Cloud Control Events Logging

To view FDM-managed events from access control rules, security intelligence rules, and SSL decryption rules in the Event Logging viewer, you first need to send those events to the Cisco cloud.

If you are sending file and malware events or intrusion events events to the Cisco cloud and you are using a Secure Event Connector, you need to configure logging settings for the device.

Send FDM-Managed Events Directly to the Cisco Cloud

Starting with Firewall device manager Version 6.5, you can send connection events, intrusion, file, and malware events directly from your FDM-managed device to the Cisco cloud. Once in the Cisco cloud, you can monitor them with Security Cloud Control and analyze them with Cisco Secure Cloud Analytis. This method does not require installing a Secure Event Connector (SEC) container on the Secure Device Connector (SDC) virtual machine.

Before you begin

Review these topics:

Procedure


Step 1

Log on to the Firewall device manager for the device from which you want to send events to the Cisco cloud.

Step 2

Select Device > System Settings > Cloud Services.

Step 3

In the Send Events to the Cisco Cloud pane, click Enable.


Requirements, Guideline, and Limitations for the SAL (SaaS) Integration

Type

Description

Cisco Secure Firewall Threat Defense

  • Security Cloud Control-managed standalone threat defense devices, Version, 7.2 and later.

  • To send events using syslog, you must have threat defense device version 6.4 or later.

  • To send events directly, you must have threat defense device version 7.2 or later.

  • To optionally exclude threat defense devices from sending events directly, you must have threat defense device version 7.4.1 or later.

  • Your firewall system must be deployed and successfully generating events.

Regional cloud

  • Determine the regional cloud that you want to send events to.

  • Events cannot be viewed from or moved between different regional clouds.

  • If you use a direct connection to send events to the Cisco Security Cloud for integration with Cisco SecureX, or Cisco SecureX threat response, or Cisco XDR, you must use the same cloud region for this integration.

  • If you send events directly, the regional cloud you specify in Security Cloud Control must match the region of your Security Cloud Control tenant.

Data plan

  • You must buy a data plan that reflects the number of events the Cisco cloud receives from your threat defense devices daily. This is called your daily ingest rate.

  • Use the Logging Volume Estimator Tool to estimate your data storage requirements.

Accounts

When you purchase a license for this integration, you are provided with a Security Cloud Control tenant account to support the integration.

Connectivity

The threat defense devices must be able to connect outbound on port 443 to the Cisco Security Cloud at the following addresses:

  • US region:

    • api-sse.cisco.com

    • mx*.sse.itd.cisco.com

    • dex.sse.itd.cisco.com

    • eventing-ingest.sse.itd.cisco.com

    • registration.us.sse.itd.cisco.com

    • us.manage.security.cisco.com

    • edge.us.cdo.cisco.com

  • EU region:

    • api.eu.sse.itd.cisco.com

    • mx*.eu.sse.itd.cisco.com

    • dex.eu.sse.itd.cisco.com

    • eventing-ingest.eu.sse.itd.cisco.com

    • registration.eu.sse.itd.cisco.com

    • eu.manage.security.cisco.com

    • edge.eu.cdo.cisco.com

  • Asia (APJ) region:

    • api.apj.sse.itd.cisco.com

    • mx*.apj.sse.itd.cisco.com

    • dex.apj.sse.itd.cisco.com

    • eventing-ingest.apj.sse.itd.cisco.com

    • registration.apj.sse.itd.cisco.com

    • apj.cdo.cisco.com

    • edge.apj.cdo.cisco.com

  • Australia region:

    • api.aus.sse.itd.cisco.com

    • mx*.aus.sse.itd.cisco.com

    • dex.au.sse.itd.cisco.com

    • eventing-ingest.aus.sse.itd.cisco.com

    • registration.au.sse.itd.cisco.com

    • aus.cdo.cisco.com

  • India region:

    • api.in.sse.itd.cisco.com

    • mx*.in.sse.itd.cisco.com

    • dex.in.sse.itd.cisco.com

    • eventing-ingest.in.sse.itd.cisco.com

    • registration.in.sse.itd.cisco.com

    • in.cdo.cisco.com

Send Cloud-delivered Firewall Management Center-Managed Events to SAL (SaaS) Using Syslog

This procedure provides information about the configuration for sending syslog messages for security events (connection, security intelligence, intrusion, file, and malware events) from devices managed by Security Cloud Control.

Before you begin

  • Configure policies to generate security events, and verify that the events you expect to see are displayed in the applicable tables under the Events & Logs menu.

  • Gather information relating to the syslog server IP address, port, and protocol (UDP or TCP).

  • Ensure that your devices can reach the syslog server.

Procedure


Step 1

In the left pane, click Administration > Firewall Management Center to open the Services page.

Step 2

Click and select Cloud-Delivered FMC and then click Configuration.

Step 3

Configure the syslog settings for your threat defense device:

  1. Click Devices > Platform Settings and edit the platform settings policy that is associated with your threat defense device.

  2. In the left-side navigation pane, click Syslog and configure the syslog settings as follows:

    Click this UI Element...

    To Do the Following:

    Logging Setup

    Enable logging, specify FTP server settings, and the Flash usage.

    Logging Destination

    Enable logging to specific destinations and to specify filtering by message severity level, event class, or by a custom event list.

    E-mail Setup

    Specify the email address that is used as the source address for syslog messages that are sent as emails.

    Events Lists

    Define a custom event list that includes an event class, a severity level, and an event ID.

    Rate Limit

    Specify the volume of messages being sent to all the configured destinations and define the message severity level to which you want to assign the rate limits.

    Syslog Settings

    Specify the logging facility, enable the inclusion of a time stamp, and enable other settings to set up a server as a syslog destination.

    Syslog Servers

    Specify the IP address, protocol that is used, format, and security zone for the syslog server that is designated as a logging destination.

  3. Click Save.

Step 4

Configure the general logging settings for the access control policy (including file and malware logging):

  1. Click Policies > Access Control and then edit the access control policy that is associated with your threat defense device.

  2. Click More and then choose Logging. Configure the general logging settings for the access control policy (including file and malware logging) as follows:

    Click this UI Element...

    To Do the Following:

    Send using specific syslog alert

    Select a syslog alert from the list of existing predefined alerts or add one by specifying the name, logging host, port, facility, and severity.

    Use the syslog settings configured in the FTD Platform Settings policy deployed on the device

    Unify the syslog configuration by configuring it in Platform Settings and reuse the settings in the access control policy. The selected severity is applied to all the connection and intrusion events. The default severity is ALERT.

    Send Syslog messages for IPS events

    Send events as syslog messages. The default syslog settings are used unless you override them.

    Send Syslog messages for File and Malware events

    Send file and malware events as syslog messages. The default syslog settings are used unless you override them.

  3. Click Save.

Step 5

Enable logging for security intelligence events for the access control policy:

  1. In the same access control policy, click the Security Intelligence tab.

  2. Click the logging icon and enable security intelligence logging using the following criteria:

    • By Domain Name—Click the logging icon next to the DNS Policy drop-down list.

    • By IP address—Click the logging icon next to Networks.

    • By URL—Click the logging icon next to URLs.

  3. Click Save.

Step 6

Enable syslog logging for each rule in the access control policy:

  1. In the same access control policy, click the Access Control tab.

  2. Click a rule to edit.

  3. Click the Logging tab in the rule.

  4. Check the Log at beginning of connection and Log at end of connection check boxes.

  5. If you want to log file events, check the Log Files check box.

  6. Check the Syslog Server check box.

  7. Verify that the rule is Using default syslog configuration in Access Control Logging.

  8. Click Confirm.

  9. Click Apply to save the rule.

  10. Repeat steps 7.a through 7.h for each rule in the policy and click Save to save the policy.


What to do next

If you have made all the required changes, deploy your changes to the managed devices.

Send Cloud-delivered Firewall Management Center-Managed Event Logs to SAL (SaaS) Using a Direct Connection

Configure the cloud-delivered Firewall Management Center to send events directly to SAL (SaaS). Follow this procedure to enable the Cisco cloud event global setting in the cloud-delivered Firewall Management Center. When needed, you can exclude individual FTD devices from sending event logs to SAL (SaaS). For more information, see Enable or Disable Threat Defense Devices to Send Event logs to SAL (SaaS) Using a Direct Connection.

Before you begin

  • Onboard devices to the cloud-delivered Firewall Management Center, assign licenses to these devices, and configure these devices to send events directly to SAL (SaaS).

  • Enable connection logging on a per-rule basis by editing a rule and choosing the Log at Beginning of Connection and Log at End of Connection options.

Procedure


Step 1

Log in to Security Cloud Control.

Step 2

In the left pane, click Administration > Firewall Management Center.

Step 3

Click Cloud-Delivered FMC, and in the System pane that is located at the right-side, click Cisco Cloud Events.

Step 4

In the Configure Cisco Cloud Events widget, do the following:

  1. Click the Send Events to the Cisco Cloud toggle button to enable the overall configuration.

  2. Check the Send Intrusion Events to the cloud check box to send the intrusion events to the cloud.

  3. Check the Send File and Malware Events to the cloud check box to send the file and malware events to the cloud.

  4. Choose an option to send the connection events to the cloud:

    • Click the None radio button to not send connection events to the cloud.

    • Click the Security Events radio button to send only security intelligence events to the cloud.

    • Click the All radio button to send all the connection events to the cloud.

  5. Click Save.


Enable or Disable Threat Defense Devices to Send Event logs to SAL (SaaS) Using a Direct Connection

Enable or disable the FTD devices managed by the cloud-delivered Firewall Management Center to send events directly to SAL (SaaS). This device-level control allows you to optionally exclude specific FTD devices from sending event logs to the Cisco cloud to reduce traffic or to maintain a combination of SAL and on-premises event log storage.


Note


  • To enable or disable sending events to the Cisco cloud from the FTD devices, enable the Cisco cloud event global setting in the cloud-delivered Firewall Management Center. For more information on enabling the Cisco cloud event global setting, see Send Cloud-delivered Firewall Management Center-Managed Event Logs to SAL (SaaS) Using a Direct Connection.

    Sending events to the Cisco cloud is enabled by default for all FTD devices when the Cisco cloud event global setting is enabled in the cloud-delivered Firewall Management Center.

  • The option to enable or disable FTD devices to send event logs to the cloud is supported on FTD Version 7.4.1 or later.


Before you begin

  • Onboard devices to the cloud-delivered Firewall Management Center, assign licenses to these devices, and configure these devices to send events directly to SAL (SaaS).

  • Enable connection logging on a per-rule basis by editing a rule and choosing the Log at Beginning of Connection and Log at End of Connection options.

Procedure


Step 1

Log in to Security Cloud Control.

Step 2

From the left pane, click Security Devices.

Step 3

Click the Devices tab to view the device.

Step 4

Click the FTD tab to view FTD devices.

Step 5

Choose the FTD devices whose configurations you want to edit, from the Security Devices list.

Step 6

In the Device Management pane, click Cloud Events.

Step 7

Click the Send Events to the Cisco Cloud toggle button to enable or disable the configuration.

Step 8

Click Save.


Secure Event Connectors

The Secure Event Connector (SEC) is a component of the Security Analytics and Logging SaaS solution. It receives events from ASA , and FDM-managed devices and forwards them to the Cisco cloud. Security Cloud Control displays the events on the Event Logging page so that administrators can analyze them there or by using Cisco Secure Cloud analytics.

The SEC is installed on a Secure Device Connector deployed in your network, on its own Security Cloud Control Connector virtual machine deployed in your network, or on an AWS Virtual Private Cloud (VPC).

Secure Event Connector ID

You may need the ID of the SEC when working with Cisco Technical Assistance Center (TAC) or other Security Cloud Control Support. That ID is found on the Secure Connectors page in Security Cloud Control. To find the SEC ID:

  1. From the Security Cloud Control menu on the left, choose Administration > Secure Connectors.

  2. Click the SEC you wish to identify.

  3. The SEC ID is the ID listed above the Tenant ID in the Details pane.

Installing Secure Event Connectors

Secure Event Connectors (SECs) can be installed on a tenant with or without an SDC.

You can install one SEC on the same virtual machine as a Secure Device Connector, if you have one; or you can install the SEC on it's own Security Cloud Control Connector virtual machine that you maintain in your network.

Install a Secure Event Connector on an SDC Virtual Machine

The Secure Event Connector (SEC) receives events from ASA and FDM-managed devices and forwards them to the Cisco cloud. Security Cloud Control displays the events on the Event Logging page so that administrators can analyze them there or by using Cisco Secure Cloud Analytics.

You can install one SEC on the same virtual machine as a Secure Device Connector, if you have one; or you can install the SEC on it's own Security Cloud Control Connector virtual machine that you maintain in your network.

This article describes installing an SEC on the same virtual machine as an SDC. If you want to install more SECs see Installing an SEC Using a Security Cloud Control Image or Install an SEC Using Your VM Image.

Before you begin

  • Purchase the Cisco Security and Analytics Logging, Logging and Troubleshooting license. Or, If you want to try Cisco Security and Analytics Logging out first, log in to Security Cloud Control, and on the main navigation bar, choose Events & Logs > Events and click Request Trial. You may also purchase the Logging Analytics and Detection and Total Network Analytics and Monitoring licenses to apply Secure Cloud Analytics to the events.

  • Make sure your SDC has been installed. For more information, see Deploy a VM for Running the Secure Device Connector and Secure Event Connector.

  • Make sure the SDC is communicating with Security Cloud Control:

    1. In the left pane, click Administration > Secure Connectors.

    2. Make sure that the SDC's last heartbeat was less than 10 minutes prior to the installation of the SEC and that the SDC's status is active.

  • System Requirements - Assign additional CPUs and memory to the virtual machine running the SDC:

    • CPU: Assign an additional 4 CPUs to accommodate the SEC to make a total of 6 CPU.

    • Memory: Assign an additional 8 GB of memory for the SEC to make a total of 10 GB of memory.

      After you have updated the CPU and memory on the VM to accommodate the SEC, power on the VM and ensure that the Secure Connectors page indicates that the SDC is in the "Active" state.

Procedure


Step 1

Log in to Security Cloud Control.

Step 2

In the left pane, click Administration > Secure Connectors.

Step 3

Click the icon and then click Secure Event Connector.

Step 4

Skip Step 1 of the wizard and go to Step 2. In step 2 of the wizard, click the link to Copy SEC Bootstrap Data.

Step 5

Open a terminal window and log into the SDC as the "cdo" user.

Step 6

Once logged in, switch to the "sdc" user. When prompted for a password, enter the password for the "cdo" user. Here is an example of those commands:

[cdo@sdc-vm ~]$ sudo su sdc
[sudo] password for cdo: <type password for cdo user>
[sdc@sdc-vm ~]$

Step 7

At the prompt, run the sec.sh setup script:

[sdc@sdc-vm ~]$ /usr/local/cdo/toolkit/sec.sh setup

Step 8

At the end of the prompt, paste the bootstrap data you copied in step 4 and press Enter.

Please copy the bootstrap data from Setup Secure Event Connector page of Security Cloud Control: KJHYFuYTFuIGhiJKlKnJHvHfgxTewrtwE
RtyFUiyIOHKNkJbKhvhgyRStwterTyufGUihoJpojP9UOoiUY8VHHGFXREWRtygfhVjhkOuihIuyftyXtfcghvjbkhB=

After the SEC is onboarded, the sec.sh runs a script to check on the health of the SEC. If all the health checks are "green," the health check sends a sample event to the Event Log. The sample event shows up in the Event Log as a policy named "sec-health-check."

If you receive a message that the registration failed or that the SEC onboarding failed, go to Troubleshooting Secure Event connector Onboarding Failures.

Step 9

Determine if the VM on which the SDC and SEC are running needs additional configuration:


What to do next

Return to Implementing Secure Logging Analytics (SaaS) for FDM-Managed Devices.

Installing an SEC Using a Security Cloud Control Image

The Secure Event Connector (SEC) forwards events from ASA and FTD to the Cisco cloud so that you can view them in the Event Logging page and investigate them with Secure Cloud Analytics, depending on your licensing.

You can install more than one Secure Event Connector (SEC) on your tenant and direct events from your ASAs and FDM-managed devices to any of the SECs you install. Having multiple SECs allows you to have SECs installed in different locations and distribute the work of sending events to the Cisco cloud.

Installing an SEC is a two part process:

  1. Install a Security Cloud Control Connector, to Support a Secure Event Connector, Using a Security Cloud Control VM Image You need one Security Cloud Control Connector for every SEC you install. The Security Cloud Control Connector is different than a Secure Device Connector (SDC).

  2. Install the Secure Event Connector on your Security Cloud Control Connector Virtual Machine.


Note


If you want to create a Security Cloud Control Connector by creating your own VM, see Install Multiple SECs for Your Tenant Using a VM Image you Create.


What to do next:

Continue with Install a Security Cloud Control Connector, to Support a Secure Event Connector, Using a Security Cloud Control VM Image

Install a Security Cloud Control Connector, to Support a Secure Event Connector, Using a Security Cloud Control VM Image

Before you begin
  • Purchase the Cisco Security and Analytics Logging, Logging and Troubleshooting license, you may also purchase the Logging Analytics and Detection and Total Network Analytics and Monitoring licenses to apply Secure Cloud Analytics to the events.

    If you would rather, you can request a trial version of Security Analytics and Logging by logging in to Security Cloud Control, and on the main navigation bar, choose Events & Logs > Events and click Request Trial.

  • Security Cloud Control requires strict certificate checking and does not support Web/Content Proxy inspection between the Security Cloud Control Connector and the Internet. If using a proxy server, disable inspection for traffic between the Security Cloud Control Connector and Security Cloud Control.

  • The Security Cloud Control Connector installed in this process must have full outbound access to the Internet on TCP port 443.

  • Review Connect to Security Cloud Control using Secure Device Connector to ensure proper network access for the Security Cloud Control Connector.

  • Security Cloud Control supports installing its Security Cloud Control Connector VM OVF image using the vSphere web client or the ESXi web client.

  • Security Cloud Control does not support installing the Security Cloud Control Connector VM OVF image using the VM vSphere desktop client.

  • ESXi 5.1 hypervisor.

  • System requirements for a VM intended to host only a Security Cloud Control Connector and an SEC:

    • VMware ESXi host needs 4 vCPU.

    • VMware ESXi host needs a minimum of 8 GB of memory.

    • VMware ESXi requires 64GB disk space to support the virtual machine depending on your provisioning choice.

  • Gather this information before you begin the installation:

    • Static IP address you want to use for your Security Cloud Control Connector VM.

    • Passwords for the root and Security Cloud Control users that you create during the installation process.

    • The IP address of the DNS server your organization uses.

    • The gateway IP address of the network the SDC address is on.

    • The FQDN or IP address of your time server.

  • The Security Cloud Control Connector virtual machine is configured to install security patches on a regular basis and in order to do this, opening port 80 outbound is required.

Procedure

Step 1

Log on to the Security Cloud Control tenant you are creating the Security Cloud Control Connector for.

Step 2

In the left pane, click Administration > Secure Connectors.

Step 3

Click the icon and then click Secure Event Connector.

Step 4

In Step 1, click Download the Security Cloud Control Connector VM image. This is a special image that you install the SEC on. Always download the Security Cloud Control Connector VM to ensure that you are using the latest image.

Step 5

Extract all the files from the .zip file. They will look similar to these:

  • Security Cloud Control-SDC-VM-ddd50fa.ovf

  • Security Cloud Control-SDC-VM-ddd50fa.mf

  • Security Cloud Control-SDC-VM-ddd50fa-disk1.vmdk

Step 6

Log on to your VMware server as an administrator using the vSphere Web Client.

Note

 

Do not use the VM vSphere desktop client.

Step 7

Deploy the on-premises Security Cloud Control Connector virtual machine from the OVF template by following the prompts. (You will need the .ovf, .mf, and .vdk files to deploy the template.)

Step 8

When the setup is complete, power on the VM.

Step 9

Open the console for your new Security Cloud Control Connector VM.

Step 10

Login as the Security Cloud Control user. The default password is adm123.

Step 11

At the prompt type sudo sdc-onboard setup

[cdo@localhost ~]$ sudo sdc-onboard setup

Step 12

When prompted, enter the default password for the Security Cloud Control user: adm123.

Step 13

Follow the prompts to create a new password for the root user.

Step 14

Follow the prompts to create a new password for the Security Cloud Control user.

Step 15

Follow the prompts to enter your Security Cloud Control domain information.

Step 16

Enter the static IP address you want to use for the Security Cloud Control Connector VM.

Step 17

Enter the gateway IP address for the network on which the Security Cloud Control Connector VM is installed.

Step 18

Enter the NTP server address or FQDN for the Security Cloud Control Connector.

Step 19

When prompted, enter the information for the Docker bridge or leave it blank if it is not applicable and press <Enter>.

Step 20

Confirm your entries.

Step 21

When prompted "Would you like to setup the SDC now?" enter n.

Step 22

Create an SSH connection to the Security Cloud Control Connector by logging in as the Security Cloud Control user.

Step 23

At the prompt type sudo sdc-onboard bootstrap

[cdo@localhost ~]$ sudo sdc-onboard bootstrap

Step 24

When prompted, enter the Security Cloud Control user's password.

Step 25

When prompted, return to Security Cloud Control and copy the Security Cloud Control bootstrap data, then paste it into your SSH session. To copy the Security Cloud Control bootstrap data:

  1. Log into Security Cloud Control.

  2. In the left pane, click Administration > Secure Connectors.

  3. Select the Secure Event Connector which you started to onboard. The status should show, "Onboarding."

  4. In the Actions pane, click Deploy an On-Premises Secure Event Connector.

  5. Copy the Security Cloud Control Bootstrap Data in step 1 of the dialog box.

Step 26

When prompted, Would you like to update these settings? enter n.

Step 27

Return to the Deploy an On-Premises Secure Event Connector dialog in Security Cloud Control and click OK. In the Secure Connectors page, you will see your Secure Event Connector is in the yellow Onboarding state.


What to do next

Continue to Install the Secure Event Connector on the Security Cloud Control Connector VM.

Install the Secure Event Connector on the Security Cloud Control Connector VM

Before you begin

You should have installed Security Cloud Control Connector VM as described inInstall a Security Cloud Control Connector, to Support a Secure Event Connector, Using a Security Cloud Control VM Image .

Procedure

Step 1

Log in to Security Cloud Control.

Step 2

In the left pane, choose Administration > Secure Connectors.

Step 3

Select the Security Cloud Control Connector that you onboarded above. In the Secure Connectors table, it will be called a Secure Event Connector and it should still be in the "Onboading" status.

Step 4

Click Deploy an On-Premises Secure Event Connector in the Actions pane on the right.

Step 5

In step 2 of the wizard, click the link to Copy SEC bootstrap data.

Step 6

Create an SSH connection to the Security Cloud Control Connector and log in as the Security Cloud Control user.

Step 7

Once logged in, switch to the sdc user. When prompted for a password, enter the password for the "Security Cloud Control" user. Here is an example of those commands:

[cdo@sdc-vm ~]$ sudo su sdc
 [sudo] password for cdo: <type password for cdo user> 
[sdc@sdc-vm ~]$

Step 8

At the prompt, run the sec.sh setup script:

[sdc@sdc-vm ~]$ /usr/local/cdo/toolkit/sec.sh setup

Step 9

At the end of the prompt, paste the bootstrap data you copied in step 4 and press Enter.

Please copy the bootstrap data from Setup Secure Event Connector page of CDO: KJHYFuYTFuIGhiJKlKnJHvHfgxTewrtwE
 RtyFUiyIOHKNkJbKhvhgyRStwterTyufGUihoJpojP9UOoiUY8VHHGFXREWRtygfhVjhkOuihIuyftyXtfcghvjbkhB= 

After the SEC is onboarded, the sec.sh runs a script to check on the health of the SEC. If all the health checks are "green," the health check sends a sample event to the Event Log. The sample event shows up in the Event Log as a policy named "sec-health-check."

If you receive a message that the registration failed or that the SEC onboarding failed, go to Troubleshooting SEC Onboarding Failures.

If you receive the success message return to Security Cloud Control and click Done on the Deploy an ON-Premise Secure Event Connector dialog box.


What to do next

Return to Implementing Secure Logging Analytics (SaaS) for FDM-Managed Devices.

Deploy Secure Event Connector on Ubuntu Virtual Machine

Before you begin

You should have installed Secure Device Connector on your Ubuntu VM as described in Deploy a VM for Running the Secure Device Connector and Secure Event Connector.

Procedure


Step 1

Log on to Security Cloud Control.

Step 2

From the left pane, Administration > Secure Connectors.

Step 3

Click the icon and then click Secure Event Connector.

Step 4

Copy the SEC bootstrap data in step 2 on the window to a notepad.

Step 5

Execute the following commands:

[sdc@vm]:~$sudo su sdc
sdc@vm:/home/user$ cd /usr/local/cdo/toolkit

When prompted, enter the SEC bootstrap data that you have copied..

sdc@vm:~/toolkit$ ./sec.sh setup
Please input the bootstrap data from Setup Secure Event Connector page of CDO: 
Successfully on-boarded SEC
It may take a few minutes for the Secure Event Connector to become "Active" in Security Cloud Control.

Install an SEC Using Your VM Image

The Secure Event Connector (SEC) forwards events from ASA and FTD to the Cisco cloud so that you can view them in the Event Logging page and investigate them with Secure Cloud Analytics, depending on your licensing.

You can install more than one Secure Event Connector (SEC) on your tenant and direct events from your ASAs and FDM-managed devices to any of the SECs you install. Having multiple SECs allows you to have SECs installed in different regions and distribute the work of sending events to the Cisco cloud.

Installing multiple SECs using your own VM image is a three part process. You must perform each of these steps:

  1. Install a Security Cloud Control Connector to Support an SEC Using Your VM Image

  2. Additional Configuration for SDCs and Security Cloud Control Connectors Installed on a VM You Created

  3. Install the Secure Event Connector


Note


Using a Security Cloud Control VM image for the Security Cloud Control Connector is the easiest, most accurate, and preferred method of installing a Security Cloud Control connector. If you want to use that method, see Installing an SEC Using a Security Cloud Control Image.


What to do next:

Continue to Install a Security Cloud Control Connector to Support an SEC Using Your VM Image

Install a Security Cloud Control Connector to Support an SEC Using Your VM Image

The Security Cloud Control Connector VM is a virtual machine on which you install an SEC. The purpose of the Security Cloud Control Connector is solely to support an SEC for Cisco Security Analytics and Logging (SaaS) customers.

This is the first of three steps you need to complete in order install and configure your Secure Event Connector (SEC). After this procedure, you need to complete the following procedures:

Before you begin
  • Purchase the Cisco Security and Analytics Logging, Logging and Troubleshootinglicense, you may also purchase the Logging Analytics and Detection and Total Network Analytics and Monitoring licenses to apply Secure Cloud Analytics to the events.

    If you would rather, you can request a trial version of Security Analytics and Logging by logging in to Security Cloud Control, and on the main navigation bar, choose Events & Logs > Events and click Request Trial.

  • Security Cloud Control requires strict certificate checking and does not support a Web/Content Proxy between the Security Cloud Control Connector and the Internet.

  • The Security Cloud Control Connector must have full outbound access to the Internet on TCP port 443.

  • Review Connect to Cisco Security Cloud Control using Secure Device Connectorto ensure proper network access for the Security Cloud Control Connector.

  • VMware ESXi host installed with vCenter web client or ESXi web client.


    Note


    We do not support installation using the vSphere desktop client.
  • ESXi 5.1 hypervisor.

  • Cent OS 7 guest operating system.

  • System requirements for a VM to host only a Security Cloud Control Connector and an SEC:

    • CPU: Assign 4 CPUs to accommodate the SEC.

    • Memory: Assign 8 GB of memory for the SEC.

    • Disk Space: 64 GB

  • Users performing this procedure should be comfortable working in a Linux environment and using the vi visual editor for editing files.

  • If you are installing your Security Cloud Control Connector on a CentOS virtual machine, we recommend you install Yum security patches on a regular basis. Depending on your Yum configuration, to acquire Yum updates, you may need to open outbound access on port 80 as well as 443. You will also need to configure yum-cron or crontab to schedule the updates. Work with your security-operations team to determine if any security policies need to change to allow you to get the Yum updates.

  • Gather this information before you begin the installation:

    • Static IP address you want to use for your Security Cloud Control Connector.

    • Passwords for the root and Security Cloud Control users that you create during the installation process.

    • The IP address of the DNS server your organization uses.

    • The gateway IP address of the network the Security Cloud Control Connector address is on.

    • The FQDN or IP address of your time server.

  • The Security Cloud Control Connector virtual machine is configured to install security patches on a regular basis and in order to do this, opening port 80 outbound is required.

  • Before you get started: Do not copy and paste the commands in this procedure into your terminal window, type them instead. Some commands include an "n-dash" and in the cut and paste process, these commands can be applied as an "m-dash" and that may cause the command to fail.

Procedure

Step 1

Log on to Security Cloud Control.

Step 2

From the left pane, Administration > Secure Connectors.

Step 3

Click the icon and then click Secure Event Connector.

Step 4

Using the link provided, copy the SEC Bootstrap Data in step 2 of the "Deploy an On-Premises Secure Event Connector" window.

Step 5

Install a CentOS 7 virtual machine (http://isoredirect.centos.org/centos/7/isos/x86_64/CentOS-7-x86_64-Minimal-1804.iso) with at least the memory, CPU, and disk space mentioned in this procedure's perquisites.

Step 6

Once installed, configure basic networking such as specifying the IP address for the Security Cloud Control Connector, the subnet mask, and gateway.

Step 7

Configure a DNS (Domain Name Server) server.

Step 8

Configure a NTP (Network Time Protocol) server.

Step 9

Install an SSH server on CentOS for easy interaction with Security Cloud Control Connector's CLI.

Step 10

Run a Yum update and then install the packages: open-vm-tools, nettools, and bind-utils

[root@sdc-vm ~]# yum update -y 
[root@sdc-vm ~]# yum install -y open-vm-tools net-tools bind-utils 

Step 11

Install the AWS CLI package (https://docs.aws.amazon.com/cli/latest/userguide/awscli-install-linux.html)

Note

 

Do not use the --user flag.

Step 12

Install the Docker CE packages (https://docs.docker.com/install/linux/docker-ce/centos/#install-docker-ce)

Note

 

Use the "Install using the repository" method.

Step 13

Start the Docker service and enable it to start on boot:

[root@sdc-vm ~]# systemctl start docker
 [root@sdc-vm ~]# systemctl enable docker 
Created symlink from /etc/systemd/system/multiuser.target.wants/docker.service to /usr/lib/systemd/system/docker.service. 

Step 14

Create two users: Security Cloud Control and sdc. The Security Cloud Control user will be the one you log-into to run administrative functions (so you don't need to use the root user directly), and the sdc user will be the user to run the Security Cloud Control Connector docker container.

[root@sdc-vm ~]# useraddSecurity Cloud Control
 [root@sdc-vm ~]# useradd sdc –d /usr/local/Security Cloud Control

Step 15

Configure the sdc user to use crontab:

[root@sdc-vm ~]# touch /etc/cron.allow
[root@sdc-vm ~]# echo "sdc" >> /etc/cron.allow

Step 16

Set a password for the Security Cloud Control user.

[root@sdc-vm ~]# passwd Security Cloud Control 
Changing password for user Security Cloud Control. 
New password: <type password>  
Retype new password: <type password> 
passwd: all authentication tokens updated successfully. 

Step 17

Add the Security Cloud Control user to the "wheel" group to give it administrative (sudo) privileges.

[root@sdc-vm ~]# usermod -aG wheelSecurity Cloud Control
 [root@sdc-vm ~]# 

Step 18

When Docker is installed, there is a user group created. Depending on the version of CentOS/Docker, this may be called either "docker" or "dockerroot". Check the /etc/group file to see which group was created, and then add the sdc user to this group.


 [root@sdc-vm ~]# grep docker /etc/group 
docker:x:993:
[root@sdc-vm ~]# 
[root@sdc-vm ~]# usermod -aG docker sdc 
[root@sdc-vm ~]# 

Step 19

If the /etc/docker/daemon.json file does not exist, create it, and populate with the contents below. Once created, restart the docker daemon.

Note

 

Make sure that the group name entered in the "group" key matches the group you found in the /etc/group file.

 [root@sdc-vm ~]# cat /etc/docker/daemon.json 
{
 "live-restore": true, 
 "group": "docker" 
} 
[root@sdc-vm ~]# systemctl restart docker 
[root@sdc-vm ~]# 

Step 20

If you are currently using a vSphere console session, switch over to SSH and log in as the Security Cloud Control user. Once logged in, change to the sdc user. When prompted for a password, enter the password for the Security Cloud Control user.

[Security Cloud Control@sdc-vm ~]$ sudo su sdc 
[sudo] password for Security Cloud Control: <type password for Security Cloud Control user > 
[sdc@sdc-vm ~]$ 

Step 21

Change directories to /usr/local/Security Cloud Control.

Step 22

Create a new file called bootstrapdata and paste the bootstrap data from Step 1 of the deployment wizrd into this file. Save the file. You can use vi or nano to create the file.

Step 23

The bootstrap data comes encoded in base64. Decode it and export it to a file called extractedbootstrapdata

 [sdc@sdc-vm ~]$ base64 -d /usr/local/Security Cloud Control/bootstrapdata > /usr/local/Security Cloud Control/extractedbootstrapdata 
[sdc@sdc-vm ~]$ 

Run the cat command to view the decoded data. The command and decoded data should look similar to this:

[sdc@sdc-vm ~]$ cat /usr/local/Security Cloud Control/extractedbootstrapdata 
Security Cloud Control_TOKEN="<token string>" 
Security Cloud Control_DOMAIN="www.defenseorchestrator.com" 
Security Cloud Control_TENANT="<tenant-name>" 
<Security Cloud Control_URL>/sdc/bootstrap/Security Cloud Control_acm="https://www.defenseorchestrator.com/sdc/bootstrap/tenant-name/<tenant-name-SDC>" 
ONLY_EVENTING="true" 

Step 24

Run the following command to export the sections of the decoded bootstrap data to environment variables.


[sdc@sdc-vm ~]$ sed -e 's/^/export /g' extractedbootstrapdata > secenv && source secenv 
[sdc@sdc-vm ~]$ 

Step 25

Download the bootstrap bundle from Security Cloud Control.

 [sdc@sdc-vm ~]$ curl -H "Authorization: Bearer $Security Cloud Control_TOKEN" "$Security Cloud Control_BOOTSTRAP_URL" -o $Security Cloud Control_TENANT.tar.gz 
100 10314 100 10314 0 0 10656 0 --:--:-- --:--:-- --:--:-- 10654 
[sdc@sdc-vm ~]$ ls -l /usr/local/Security Cloud Control/*SDC 
-rw-rw-r--. 1 sdc sdc 10314 Jul 23 13:48 /usr/local/Security Cloud Control/Security Cloud Control_<tenant_name>

Step 26

Extract the Security Cloud Control Connector tarball, and run the bootstrap_sec_only.sh file to install the Security Cloud Control Connector package.

 [sdc@sdc-vm ~]$ tar xzvf /usr/local/Security Cloud Control/tenant-name-SDC 
<snipped – extracted files> 
[sdc@sdc-vm ~]$ 
[sdc@sdc-vm ~]$ /usr/local/Security Cloud Control/bootstrap/bootstrap_sec_only.sh 
[2018-07-23 13:54:02] environment properly configured 
download: s3://onprem-sdc/toolkit/prod/toolkit.tar to toolkit/toolkit.tar 
toolkit.sh 
common.sh 
es_toolkit.sh 
sec.sh 
healthcheck.sh 
troubleshoot.sh 
no crontab for sdc 
-bash-4.2$ crontab -l 
*/5 * * * * /usr/local/Security Cloud Control/toolkit/es_toolkit.sh upgradeEventing 2>&1 >> /usr/local/Security Cloud Control/toolkit/toolkit.log 
0 2 * * * sleep 30 && /usr/local/Security Cloud Control/toolkit/es_toolkit.sh es_maintenance 2>&1 >> /usr/local/Security Cloud Control/toolkit/toolkit.log 
You have new mail in /var/spool/mail/sdc

What to do next
Continue to Additional Configuration for SDCs and Security Cloud Control Connectors Installed on a VM You Created .

Additional Configuration for SDCs and Security Cloud Control Connectors Installed on a VM You Created

If you installed your Security Cloud Control Connector on your own CentOS 7 virtual machine, perform one of the following additional configuration procedures to allow events to reach the SEC:

Before you begin:

This is the second of three steps you need to complete in order to install and configure your SEC. If you have not already, complete Install a Security Cloud Control Connector to Support an SEC Using Your VM Image before making these configuration changes.

After you complete one of the additional configuration changes described here, complete Install the Secure Event Connector

Disable the firewalld service on the CentOS 7 VM
  1. Log into the CLI of the SDC VM as the "Security Cloud Control" user.

  2. Stop the firewalld service, and then ensure that it will remain disabled upon subsequent reboots of the VM. If you are prompted, enter the password for the Security Cloud Control user:

    [Security Cloud Control@SDC-VM ~]$ sudo systemctl stop firewalld
    Security Cloud Control@SDC-VM ~]$ sudo systemctl disable firewalld
  3. Restart the Docker service to re-insert Docker-specific entries into the local firewall:

    [Security Cloud Control@SDC-VM ~]$ sudo systemctl restart docker

  4. Continue to Install the Secure Event Connector.

Allow the firewalld service to run and add firewall rules to allow event traffic to reach the SEC
  1. Log into the CLI of the SDC VM as the "Security Cloud Control" user.

  2. Add local firewall rules to allow incoming traffic to the SEC from the TCP, UDP, or NSEL ports you configured. See Finding Your Device's TCP, UDP, and NSEL Port Used for Cisco Security Analytics and Logging for the ports used by your SEC. If prompted, enter the password for the Security Cloud Control user. Here is an example of the commands. You may need to specify different port values.

    [Security Cloud Control@SDC-VM ~]$ sudo firewall-cmd --zone=public --permanent --add-port=10125/tcp 
    Security Cloud Control@SDC-VM ~]$ sudo firewall-cmd --zone=public --permanent --add-port=10025/udp
    [Security Cloud Control@SDC-VM ~]$ sudo firewall-cmd --zone=public --permanent --add-port=10425/udp
  3. Restart the firewalld service to make the new local firewall rules both active and persistent:

    [Security Cloud Control@SDC-VM ~]$ sudo systemctl restart firewalld

  4. Continue to Install the Secure Event Connector.

Install the Secure Event Connector on your Security Cloud Control Connector Virtual Machine

Before you begin

This is the third of three steps you need to complete in order to install and configure your Secure Event Connector (SEC). If you have not already, complete the following tasks before continuing with this procedure:

Procedure

Step 1

Log in to Security Cloud Control.

Step 2

In the left pane, Administration > Secure Connectors.

Step 3

Select the Security Cloud Control Connector that you installed using the procedure in the prerequisites above. In the Secure Connectors table, it will be displayed as Secure Event Connector.

Step 4

Click Deploy an On-Premises Secure Event Connector in the Actions pane on the right.

Step 5

In step 2 of the wizard, click the link to Copy SEC Bootstrap Data.

Step 6

Connect to the Secure Connector using SSH and log in as the Security Cloud Control user.

Step 7

Once logged in, switch to the sdc user. When prompted for a password, enter the password for the "Security Cloud Control" user. Here is an example of those commands:

[cdo@sdc-vm ~]$ sudo su sdc
[sudo] password for cdo: <type password for cdo user>
[sdc@sdc-vm ~]$ 

Step 8

At the prompt, run the sec.sh setup script:

[sdc@sdc-vm ~]$ /usr/local/cdo/toolkit/sec.sh setup

Step 9

At the end of the prompt, paste the bootstrap data you copied in step 4 and press Enter.

Please copy the bootstrap data from Setup Secure Event Connector page of CDO:
 KJHYFuYTFuIGhiJKlKnJHvHfgxTewrtwE RtyFUiyIOHKNkJbKhvhgyRStwterTyufGUihoJpojP9UOoiUY8VHHGFXREWRtygfhVjhkOuihIuyftyXtfcghvjbkhB=

After the SEC is onboarded, the sec.sh runs a script to check on the health of the SEC. If all the health checks are "green," the health check sends a sample event to the Event Log. The sample event shows up in the Event Log as a policy named "sec-health-check."

If you receive a message that the registration failed or that the SEC onboarding failed, go to Troubleshooting Secure Event Connector Onboarding Failures.

If you receive the success message, click Done in the Deploy an ON-Premise Secure Event Connector dialog box.You have finished installing an SEC on a your VM image.


What to do next

Return to this procedure to continue your implementation of SAL SaaS: Implementing Secure Logging Analytics (SaaS) for FDM-Managed Devices.

Install a Secure Event Connector on an AWS VPC Using a Terraform Module

Before you begin

  • To perform this task, you must enable SAL on your Security Cloud Control tenant. This section presumes that you have a SAL license. If you do not have one, purchase the Cisco Security and Analytics Logging, Logging and Troubleshooting license.

  • Ensure you have a new SEC installed. To create a new SEC, see Install a Secure Event Connector on an SDC Virtual Machine.

  • When installing the SEC, make sure you take a note of the Security Cloud Control bootstrap data and SEC bootstrap data.

Procedure


Step 1

Go to Secure Event Connector Terraform Module on the Terraform Registry and follow the instructions to add the SEC Terraform module to your Terraform code.

Step 2

Apply the Terraform code.

Step 3

Ensure that you print the instance_id and sec_fqdn outputs, because you will need them later in the procedure.

Note

 

To troubleshoot your SEC, you must connect to your SEC instance using the AWS Systems Manager Session Manager (SSM). See the AWS Systems Manager Session Manager documentation to know more about connecting to an instance using SSM.

Ports to connect to the SDC instance using SSH are not exposed for secuirty reasons.

Step 4

To enable sending of logs from your ASA to the SEC, obtain the certificate chain of the SEC you created and remove the leaf certificate by running the following command with the output from Step 3:

rm -f /tmp/cert_chain.pem && openssl s_client -showcerts -verify 5 -connect <FQDN>:10125 < /dev/null | awk '/BEGIN CERTIFICATE/,/END CERTIFICATE/{ if(/BEGIN CERTIFICATE/){a++}; out="/tmp/cert_chain.pem"; if(a > 1) print >>out}'

Step 5

Copy the contents of /tmp/cert_chain.pem to your clipboard.

Step 6

Take a note of the IP address of the SEC using the following command:

nslookup <FQDN>

Step 7

Log in to Security Cloud Control and start adding a new trustpoint object. See Adding a Trusted CA Certificate Object for more information. Ensure you uncheck the Enable CA flag in basic constraints extension checkbox in Other Options before clicking Add.

Step 8

Click Add, copy the CLI commands generated by Security Cloud Control in the Install Certificate page, and click Cancel.

Step 9

Below enrollment terminal, add no ca-check in a text clipboard.

Step 10

SSH into your ASA device or use the ASA CLI option in Security Cloud Control and execute the following commands:

DataCenterFW-1> en
Password: *****************
DataCenterFW-1# conf t
DataCenterFW-1(config)# <paste your modified ASA CLIs here and press Enter>
DataCenterFW-1(config)# wr mem
Building configuration...
Cryptochecksum: 6634f35f 4c5137f1 ab0c5cdc 9784bdb6

What to do next

You can check if your SEC is receiving packets using AWS SSM:
You should now see logs similar to this:
time="2023-05-10T17:13:46.135018214Z" level=info msg="[ip-10-100-5-19.ec2.internal][util.go:67 plugin.createTickers:func1] Events - Processed - 6/s, Dropped - 0/s, Queue size - 0"

Deprovisioning Cisco Security Analytics and Logging (SaaS)

If you allow your Cisco Security Analytics and Logging (SaaS) paid license to lapse, you have a grace period of 90 days. If you renew your paid license during this grace period, there is no interruption in your service.

Otherwise, if you allow the 90-day grace period to elapse, the system purges all of your customer data. You can no longer view ASA or FTD events from the Event Logging page, nor have dynamic entity modeling behavioral analytics applied to your ASA or FTD events and network flow data.

Remove the Secure Event Connector

Warning: This procedure deletes the Secure Event Connector from the Secure Device Connector. Doing so will prevent you from using Secure Logging Analytics (SaaS). It is not reversible. If you have any questions or concerns, contact Security Cloud Control support before taking this action.

Removing the Secure Event Connector from your Secure Device Connector is a two-step process:

  1. Remove SEC from Security Cloud Control.

  2. Remove SEC files from the SDC.

What to do next: Continue to Remove SEC from Security Cloud Control

Remove an SEC from Security Cloud Control

Before you begin

See Remove the Secure Event Connector.

Procedure


Step 1

Log in to Security Cloud Control.

Step 2

From the left pane, choose Administration > Secure Connectors.

Step 3

Select the row with the device type, Secure Event Connector.

Warning

 

Be careful NOT to select your Secure Device Connector.

Step 4

In the Actions pane, click Remove.

Step 5

Click OK to confirm.


What to do next

Continue to Remove SEC files from the SDC.

Remove SEC files from the SDC

This is the second part of a two part procedure to remove the Secure Event Connector from your SDC. See Remove the Secure Event Connector before you begin.

Procedure


Step 1

Open your virtual machine hypervisor and start a console session for your SDC.

Step 2

Switch to the SDC user.

 [cdo@tenant toolkit]$sudo su sdc 

Step 3

At the prompt type one of these commands:

  • If you are managing only your own tenant:

    [sdc@tenant toolkit]$ /usr/local/cdo/toolkit/sec.sh remove
  • If you manage more than one tenant, add Security Cloud Control_ to the beginning of the tenant name. For example:

     [sdc@tenant toolkit]$ /usr/local/cdo/toolkit/sec.sh remove CDO_[tenant_name] 

Step 4

Confirm your intention to remove the SEC files.


Provision a Cisco Secure Cloud Analytics Portal

Required License: Logging Analytics and Detection or Total Network Analytics and Monitoring

If you purchase a Logging Analytics and Detection or Total Network Analytics and Monitoring license, after you deploy and configure the Secure Event Connector (SEC), you must associate a Secure Cloud Analytics portal with your Security Cloud Control portal to view Secure Cloud Analytics alerts. When you purchase the license, if you have an existing Secure Cloud Analytics portal, you can provide the Secure Cloud Analytics portal name and immediately link it to your Security Cloud Control portal.

Otherwise, you can request a new Secure Cloud Analytics portal from the Security Cloud Control UI. The first time you access Secure Cloud Analytics alerts, the system takes you to a page to request the Secure Cloud Analytics portal. The user that requests this portal is granted administrator permission in the portal.

Procedure


Step 1

In the left pane, click Analytics > Secure Cloud Analytics to open the Secure Cloud Analytics UI in a new window.

Step 2

Click Start Free Trial to provision a Secure Cloud Analytics portal and associate it with your Security Cloud Control portal.

Note

 

After you request the portal, the provisioning may take up to several hours.


Ensure that your portal is provisioned before moving on to the next step.

  1. In the left pane, click Analytics > Secure Cloud Analytics to open the Secure Cloud Analytis UI in a new window.

  2. You have the following options:

    • If you requested a Secure Cloud Analytics portal, and the system states it is still provisioning the portal, wait and try to access the alerts later.

    • If the Secure Cloud Analytics portal is provisioned, enter your Username and Password, then click Sign in.


Note


The administrator user can invite other users to create accounts within the Secure Cloud Analytis portal. See Viewing Cisco Secure Cloud Analytics Alerts from Security Cloud Control for more information.


What to do next

Review Sensor Health and Security Cloud Control Integration Status in Secure Cloud Analytics

Sensor Status

Required License: Logging Analytics and Detection or Total Network Analytics and Monitoring

In the Secure Cloud Analytis web UI, you can view your Security Cloud Control integration status and your configured sensors from the Sensor List page. The Security Cloud Control integration is the read-only connection-events sensor. Stelathwatch Cloud provides an overall health of your sensors in the main menu:

  • green cloud icon () - connectivity established with all sensors, and Security Cloud Control if configured

  • yellow cloud icon () - connectivity established with some sensors, or Security Cloud Control if configured, and one or more sensors is not configured properly

  • red cloud icon () - connectivity lost with all configured sensors, and Security Cloud Control if configured

Per sensor or Security Cloud Control integration, a green icon signifies connectivity established, and a red icon signifies connectivity lost.

Procedure


Step 1

1. In the Secure Cloud Analytis portal UI, select Settings () > Sensors.

Step 2

Select Sensor List.


Cisco Secure Cloud Analytics Sensor Deployment for Total Network Analytics and Reporting

Secure Cloud Analytics Sensor Overview and Deployment

Required License: Total Network Analytics and Monitoring

If you obtain a Total Network Analytics and Monitoring license, after you provision a Secure Cloud Analytics portal, you can:

  • Deploy and configure a Secure Cloud Analytics sensor within your on-premises network to pass network flow data to the cloud for analysis.

  • Configure your cloud-based deployment to pass network flow log data to Secure Cloud Analytics for analysis.

Firewalls at your network perimeter gather information about traffic between your internal network and external networks, while Secure Cloud Analytics sensors gather information about traffic within your internal network.


Note


FDM-managedSecure Firewall Threat Defense devices may be configured to pass NetFlow data. When you deploy a sensor, do not configure it to pass NetFlow data from any of your FDM-managedSecure Firewall Threat Defense devices which you also configured to pass event information to Security Cloud Control.


See the Secure Cloud Analytics Sensor Installation Guide for sensor deployment instructions and recommendations.

See the Secure Cloud Analytics Public Cloud Monitoring Guides for cloud-based deployment configuration instructions and recommendations.


Note


You can also review instructions in the Secure Cloud Analytics portal UI to configure sensors and your cloud-based deployment.


See the Secure Cloud Analytics Free Trial Guide for more information about Secure Cloud Analytics.

Next Steps

Viewing Cisco Secure Cloud Analytics Alerts from Security Cloud Control

Required License: Logging Analytics and Detection or Total Network Analytics and Monitoring

While you can review your firewall events on the Events logging page, you cannot review Cisco Secure Cloud Analytics alerts from the Security Cloud Control portal UI. You can cross-launch from Security Cloud Control to the Secure Cloud Analytics portal using the Security Analytics menu option, and view alerts generated from firewall event data (and from network flow data if you enabled Total Network Analytics and Monitoring). The Security Analytics menu option displays a badge with the number of Secure Cloud Analytics alerts in an open workflow status, if 1 or more are open.

If you use a Security Analytics and Logging license to generate Secure Cloud Analytics alerts, and you provisioned a new Secure Cloud Analytics portal, log into Security Cloud Control, then cross-launch to Secure Cloud Analytics using Cisco Security Cloud Sign On. You can also directly access your Secure Cloud Analytics portal through its URL.

See Cisco Security Cloud Sign On for more information.

Inviting Users to Join Your Secure Cloud Analytics Portal

The initial user to request the Secure Cloud Analytics portal provision has administrator privileges in the Secure Cloud Analytics portal. That user can invite other users by email to join the portal. If these users do not have Cisco Security Cloud Sign On credentials, they can create them using the link in the invite email. Users can then use Cisco Security Cloud Sign On credentials to log in during the cross-launch from Security Cloud Control to Secure Cloud Analytics.

To invite other users to your Secure Cloud Analytics portal by email:

Procedure


Step 1

Log into your Secure Cloud Analytics portal as an administrator.

Step 2

Select Settings > Account Management > User Management.

Step 3

Enter an Email address.

Step 4

Click Invite.


Cross-Launching from Security Cloud Control to Secure Cloud Analytics

To view security alerts from Security Cloud Control:

Procedure


Step 1

Log into the Security Cloud Control portal.

Step 2

In the left pane, choose Analytics > Secure Cloud Analytics.

Step 3

In the Secure Cloud Analytics interface, select Monitor > Alerts.


Cisco Secure Cloud Analytics and Dynamic Entity Modeling

Required License: Logging Analytics and Detection or Total Network Analytics and Monitoring

Secure Cloud Analytics is a software as a service (SaaS) solution that monitors your on-premises and cloud-based network deployments. By gathering information about your network traffic from sources including firewall events and network flow data, it creates observations about the traffic and automatically identifies roles for network entities based on their traffic patterns. Using this information combined with other sources of threat intelligence, such as Talos, Secure Cloud Analytics generates alerts, which constitute a warning that there is behavior that may be malicious in nature. Along with the alerts, Secure Cloud Analytics provides network and host visibility, and contextual information it has gathered to provide you with a better basis to research the alert and locate sources of malicious behavior.

Dynamic Entity Modeling

Dynamic entity modeling tracks the state of your network by performing a behavioral analysis on firewall events and network flow data. In the context of Secure Cloud Analytics, an entity is something that can be tracked over time, such as a host or endpoint on your network. Dynamic entity modeling gathers information about entities based on the traffic they transmit and activities they take on your network. Secure Cloud Analytics, integrated with a Logging Analytics and Detection license, can draw from firewall events and other traffic information in order to determine the types of traffic the entity usually transmits. If you purchase a Total Network Analytics and Monitoring license, Secure Cloud Analytics can also include NetFlow and other traffic information in modeling entity traffic. Secure Cloud Analytics updates these models over time, as the entities continue to send traffic, and potentially send different traffic, to keep an up-to-date model of each entity. From this information, Secure Cloud Analytics identifies:

  • Roles for the entity, which are a descriptor of what the entity usually does. For example, if an entity sends traffic that is generally associated with email servers, Secure Cloud Analytics assigns the entity an Email Server role. The role/entity relationship can be many-to-one, as entities may perform multiple roles.

  • Observations for the entity, which are facts about the entity's behavior on the network, such as a heartbeat connection with an external IP address, or a remote access session established with another entity. If you integrate with Security Cloud Control, these facts can be obtained from firewall events. If you also purchase a Total Network Analytics and Monitoring, license, the system can also obtain facts from NetFlow, and generate observations from both firewall events and NetFlow. Observations on their own do not carry meaning beyond the fact of what they represent. A typical customer may have many thousands of observations and a few alerts.

Alerts and Analysis

Based on the combination of roles, observations, and other threat intelligence, Secure Cloud Analytics generates alerts, which are actionable items that represent possible malicious behavior as identified by the system. Note that one alert may represent multiple observations. If a firewall logs multiple connection events related to the same connection and entities, this may result in only one alert.

For example, a New Internal Device observation on its own does not constitute possible malicious behavior. However, over time, if the entity transmits traffic consistent with a Domain Controller, then the system assigns a Domain Controller role to the entity. If the entity subsequently establishes a connection to an external server that it has not established a connection with previously, using unusual ports, and transfers large amounts of data, the system would log a New Large Connection (External) observation and an Exceptional Domain Controller observation. If that external server is identified as on a Talos watchlist, then the combination of all this information would lead Secure Cloud Analytics to generate an alert for this entity's behavior, prompting you to take further action to research, and remediate malicious behavior.

When you open an alert in the Secure Cloud Analytics web portal UI, you can view the supporting observations that led the system to generate the alert. From these observations, you can also view additional context about the entities involved, including the traffic that they transmitted, and external threat intelligence if it is available. You can also see other observations and alerts that entities were involved with, and determine if this behavior is tied to other potentially malicious behavior.

Note that when you view and close alerts in Secure Cloud Analytics, you cannot allow or block traffic from the Secure Cloud Analytics UI. You must update your firewall access control rules to allow or block traffic, if you deployed your devices in active mode, or your firewall access control rules if your firewalls are deployed in passive mode.

Working with Alerts Based on Firewall Events

Required License: Logging Analytics and Detection or Total Network Analytics and Monitoring

Alerts Workflow

An alert's workflow is based around its status. When the system generates an alert, the default status is Open, and no user is assigned. When you view the Alerts summary, all open alerts are displayed by default, as these are of immediate concern.

Note: If you have a Total Network Analytics and Monitoring license, your alerts can be based on observations generated from NetFlow, observations generated from firewall events, or observations from both data sources.

As you review the Alerts summary, you can assign, tag, and update status on alerts as an initial triage. You can use the filters and search functionality to locate specific alerts, or display alerts of different statuses, or associated with different tags or assignees. You can set an alert's status to Snoozed, in which case it does not reappear in the list of open alerts until the snooze period elapses. You can also remove Snoozed status from an alert, to display it as an open alert again. As you review alerts, you can assign them to yourself or another user in the system. Users can search for all alerts assigned to their username.

From the Alerts summary, you can view an alert detail page. This page allows you to review additional context about the supporting observations that resulted in this alert, and additional context about the entities involved in this alert. This information can help you pinpoint the actual issue, in order to further research the issue on your network, and potentially resolve malicious behavior.

As you research within the Secure Cloud Analytics web portal UI, in Security Cloud Control, and on your network, you can leave comments with the alert that describe your findings. This helps create a record for your research that you can reference in the future.

If you complete your analysis, you can update the status to Closed, and have it no longer appear by default as an open alert. You can also re-open a closed alert in the future if circumstances change.

The following presents general guidelines and suggestions for how to investigate a given alert. Because Secure Cloud Analytics provides additional context when it logs an alert, you can use this context to help guide your investigation.

These steps are meant to be neither comprehensive, nor all-inclusive. They merely offer a general framework with which to start investigating an alert.

In general, you can take the following steps when you review an alert:

  1. Triage open alerts

  2. Snooze alerts for later analysis

  3. Update the alert for further investigation

  4. Review the alert and start your investigation

  5. Examine the entity and users

  6. Remediate issues using Secure Cloud Analytics

  7. Update and close the alert

Triage open alerts

Triage the open alerts, especially if more than one have yet to be investigated:

Ask the following questions:

  • Have you configured this alert type as high priority?

  • Did you set a high sensitivity for the affected subnet?

  • Is this unusual behavior from a new entity on your network?

  • What is the entity's normal role, and how does the behavior in this alert fit that role?

  • Is this an exceptional deviation from normal behavior for this entity?

  • If a user is involved, is this expected behavior from the user, or exceptional?

  • Is protected or sensitive data at risk of being compromised?

  • How severe is the impact to your network if this behavior is allowed to continue?

  • If there is communication with external entities, have these entities established connections with other entities on your network in the past?

If this is a high priority alert, consider quarantining the entity from the internet, or otherwise closing its connections, before continuing your investigation.

Snooze alerts for later analysis

Snooze alerts when they are of lesser priority, as compared to other alerts. For example, if your organization is repurposing an email server as an FTP server, and the system generates an Emergent Profile alert (indicating that an entity's current traffic matches a behavior profile that it did not previously match), you can snooze this alert as it is intended behavior, and revisit it at a later date. A snoozed alert does not show up with the open alerts; you must specifically filter to review these snoozed alerts.

Snooze an alert:

Procedure


Step 1

Click Close Alert.

Step 2

In the Snooze this alert pane, select a snooze period from the drop-down.

Step 3

Click Save.


What to do next

When you are ready to review these alerts, you can unsnooze them. This sets the status to Open, and displays the alert alongside the other Open alerts.

Unsnooze a snoozed alert:

  • From a snoozed alert, click Unsnooze Alert.

Update the alert for further investigation

Open the alert detail:

Procedure


Step 1

Select Monitor > Alerts.

Step 2

Click an alert type name.


What to do next

Based on your initial triage and prioritization, assign the alert and tag it:

  1. Select a user from the Assignee drop-down to assign the alert, so a user can start investigating.

  2. Select one or more Tags from the drop-down to add tags to the alert, to better categorize your alert's for future identification, as well as to try and establish long-term patterns in your alerts.

  3. Enter a Comment on this alert, then click Comment to leave comments as necessary to track your initial findings, and assist the person assigned to the alert. The alert tracks both system comments and user comments.

Review the alert and start your investigation

If you are reviewing an assigned alert, review the alert detail to understand why Secure Cloud Analytics generated an alert. Review the supporting observations to understand what these observations mean for the source entity.

Note that if the alert was generated based on firewall events, the system does not note that your firewall deployment was the source of this alert.

View all of the supporting observations for this source entity to understand its general behavior and patterns, and see if this activity may be part of a longer trend:

Procedure


Step 1

From the alert detail, click the arrow icon () next to an observation type to view all logged observations of that type.

Step 2

Click the arrow icon () next to All Observations for Network to view all logged observations for this alert's source entity.


Download the supporting observations in a comma-separated value file, if you want to perform additional analysis on these observations:

  • From the alert detail, in the Supporting Observations pane, click CSV.

From the observations, determine if the source entity behavior is indicative of malicious behavior. If the source entity established connections with multiple external entities, determine if the external entities are somehow related, such as if they all have similar geolocation information, or their IP addresses are from the same subnet.

View additional context surrounding the source entity from a source entity IP address or hostname, including other alerts and observations it may be involved in, information about the device itself, and what type of session traffic it is transmitting:

  • Select Alerts from the IP address or hostname drop-down to view all alerts related to the entity.

  • Select Observations from the IP address or hostname drop-down to view all observations related to the entity.

  • Select Device from the IP address or hostname drop-down to view information about the device.

  • Select Session Traffic from the IP address or hostname drop-down to view session traffic related to this entity.

  • Select Copy from the IP address or hostname drop-down to copy the IP address or hostname.

Note that the source entity in Secure Cloud Analytics is always internal to your network. Contrast this with the Initiator IP in a firewall event, which indicates the entity that initiated a connection, and may be internal or external to your network.

From the observations, examine information about other external entities. Examine the geolocation information, and determine if any of the geolocation data or Umbrella data identifies a malicious entity. View the traffic generated by these entities. Check whether Talos, AbuseIPDB, or Google have any information on these entities. Find the IP address on multiple days and see what other types of connections the external entity established with entities on your network. If necessary, locate those internal entities and determine if there is any evidence of compromise or unintended behavior.

Review the context for an external entity IP address or hostname with which the source entity established a connection:

  • Select IP Traffic from the IP address or hostname drop-down to view recent traffic information for this entity.

  • Select Session Traffic from the IP address or hostname drop-down to view recent session traffic information for this entity.

  • Select AbuseIPDB from the IP address or hostname drop-down to view information about this entity on AbuseIPDB's website.

  • Select Cisco Umbrella from the IP address or hostname drop-down to view information about this entity on Cisco Umbrella's website.

  • Select Google Search from the IP address or hostname drop-down to search for this IP address on Google.

  • Select Talos Intelligence from the IP address or hostname drop-down to view information about this information on Talos's website.

  • Select Add IP to watchlist from the IP address or hostname drop-down to add this entity to the watchlist.

  • Select Find IP on multiple days from the IP address or hostname drop-down to search for this entity's traffic from the past month.

  • Select Copy from the IP address or hostname drop-down to copy the IP address or hostname.

Note that connected entities in Secure Cloud Analytics are always external to your network. Contrast this with the Responder IP in a firewall event, which indicates the entity that responded to a connection request, and may be internal or external to your network.

Leave comments as to your findings.

  • From the alert detail, enter a Comment on this alert, then click Comment.

Examine the entity and users

After you review the alert in the Secure Cloud Analytics portal UI, you can perform an additional examination on a source entity directly, any users that may have been involved with this alert, and other related entities.

  • Determine where the source entity is on your network, physically or in the cloud, and access it directly. Locate the log files for this entity. If it is a physical entity on your network, access the device to review the log information, and see if there is any information as to what caused this behavior. If it is a virtual entity, or stored in the cloud, access the logs and search for entries related to this entity. Examine the logs for further information on unauthorized logins, unapproved configuration changes, and the like.

  • Examine the entity. Determine if you can identify malware or a vulnerability on the entity itself. See if there has been some malicious change, including if there are physical changes to a device, such as a USB stick that is not approved by your organization.

  • Determine if a user on your network, or from outside your network, was involved. Ask the user what they were doing if possible. If the user is unavailable, determine if they were supposed to have access, and if a situation occurred that prompted this behavior, such as a terminated employee uploading files to an external server before leaving the company.

Leave comments as to your findings:

  • From the alert detail, enter a Comment on this alert, then click Comment.

Remediate issues using Secure Cloud Analytics

If malicious behavior caused the alert, remediate the malicious behavior. For example:

  • If a malicious entity or user attempted to log in from outside your network, update your firewall rules and firewall configuration to prevent the entity or user from accessing your network.

  • If an entity attempted to access an unauthorized or malicious domain, examine the affected entity to determine if malware is the cause. If there are malicious DNS redirects, determine if other entities on your network are affected, or part of a botnet. If this is intended by a user, determine if there is a legitimate reason for this, such as testing firewall settings. Update your firewall rules and firewall configuration to prevent further access to the domain.

  • If an entity is exhibiting behavior that is different from the historical entity model behavior, determine if the behavior change is intended. If it is unintended, examine whether an otherwise authorized user on your network is responsible for the change. Update your firewall rules and firewall configuration to address unintended behavior if it involves connections with entities that are external to your network.

  • If you identify a vulnerability or exploit, update or patch the affected entity to remove the vulnerability, or update your firewall configuration to prevent unauthorized access. Determine if other entities on your network may similarly be affected, and apply the same update or patch to those entities. If the vulnerability or exploit currently does not have a fix, contact the appropriate vendor to let them know.

  • If you identify malware, quarantine the entity and remove the malware. Review the firewall file and malware events to determine if other entities on your network are at risk, and quarantine and update the entities to prevent this malware from spreading. Update your security intelligence with information about this malware, or the entities that caused this malware. Update your firewall access control and file and malware rules to prevent this malware from infecting your network in the future. Alert vendors as necessary.

  • If malicious behavior resulted in data exfiltration, determine the nature of the data sent to an unauthorized source. Follow your organization's protocols for unauthorized data exfiltration. Update your firewall configuration to prevent future data exfiltration attempts by this source.

Update and close the alert

Add additional tags based on your findings:

Procedure


Step 1

In the Secure Cloud Analytics portal UI, select Monitor > Alerts.

Step 2

Select one or more Tags from the drop-down.


Add final comments describing the results of your investigation, and any remediation steps taken:

  • From an alert's detail, enter a Comment on this alert, then click Comment.

Close the alert, and mark it as helpful or not helpful:

  1. From an alert's detail, click Close Alert.

  2. Select Yes if the alert was helpful, or No if the alert was unhelpful. Note that this does not necessarily mean that the alert resulted from malicious behavior, just that the alert was helpful to your organization.

  3. Click Save.

What to do next

Reopen a closed alert

If you discover additional information related to a closed alert, or want to add more comments related to that alert, you can reopen it, changing the status to Open. You can then make changes as necessary to the alert, then close it again when your additional investigation is complete.

Reopen a closed alert:

  • From a closed alert's detail, click Reopen Alert.

Modifying Alert Priorities

Required License: Logging Analytics and Detection or Total Network Analytics and Monitoring

Alert types come with default priorities, which affect how sensitive the system is to generating alerts of this type. Alerts default to low or normal priority, based on Cisco intelligence and other factors. Based on your network environment, you may want to reprioritize alert types, to emphasize certain alerts that you are concerned with. You can configure any alert type to be low, normal, or high priority.

  • Select Monitor > Alerts.

  • Click the settings drop-down icon (), then select Alert Types and Priorities.

  • Click the edit icon () next to an alert type and select low, medium, or high to change the priority.

Viewing Live Events

The Live events page shows the most recent 500 events that match the filter and search criteria you entered. If the Live events page displays the maximum of 500 events, and more events stream in, Security Cloud Control displays the newest live events, and transfers the oldest live events to the Historical events page, keeping the total number of live events at 500. That transfer takes roughly a minute to perform. If no filtering criteria is added, you will see all the latest Live 500 events generated by rules configured to log events.

The event timestamps are shown in UTC.

Changing the filtering criteria, whether live events are playing or paused, clears the events screen and restarts the collection process.

To see live events in the Security Cloud Control Events viewer:

Procedure


Step 1

In the left pane, choose Events & Logs > Events.

Step 2

Click the Live tab.


What to do next

See how to play and pause events by reading .

Play/Pause Live Events

You can "play" or "pause" live events as they stream in. If live events are "playing," Security Cloud Control displays events that match the filtering criteria specified in the Events viewer in the order they are received. If events are paused, Security Cloud Control does not update the Live events page until you restart playing live events. When you restart playing events, Security Cloud Control begins populating events in the Live page from the point at which you restarted playing events. It doesn't back-fill the ones you missed.

To view all the events that Security Cloud Control received whether you played or paused live event streaming, click the Historical tab.

Auto-pause Live Events

After displaying events for about 5 consecutive minutes, Security Cloud Control warns you that it is about to pause the stream of live events. At that time, you can click the link to continue streaming live events for another 5 minutes or allow the stream to stop. You can restart the live events stream when you are ready.

Receiving and Reporting Events

There may be a small lag between the Secure Event Connector (SEC) receiving events and Security Cloud Control posting events in the Live events viewer. You can view the gap on the Live page. The time stamp of the event is the time it was received by SEC.

View Historical Events

The Live events page shows the most recent 500 events that match the filter and search criteria you entered. Events older than the most recent 500 are transferred to the Historical events table. That transfer takes roughly a minute to perform. You can then filter all the events you have stored to find events you're looking for.

To view historical events:

Procedure


Step 1

In the navigation pane, choose Events & Logs > Events.

Step 2

Click the Historical tab. By default, when you open the Historical events table, the filter is set to display the events collected within the last hour.

The event attributes are largely the same as what is reported by Firepower Device Manager (FDM) or the Adaptive Security Device Manager (ASDM).


Customize the Events View

Any changes made to the Event Logging page are automatically saved for when you navigate away from this page and come back at a later time.


Note


The Live and Historical events view have the same configuration. When you customize the events view, these changes are applied to both the Live and Historical view.


Show or Hide Columns

You can modify the event view for both live and historical events to only include column headers that apply to the view you want. Click the column filter icon located to the right of the columns, select or deselect the columns you want, and then click Apply.

Figure 1. Show or Hide Columns
Screen capture of Customize Table pane

Columns with asterisks are provided within the event table by default, although you can remove them at any time.

Search and Add Columns

You can search for more columns, which are not part of the default list, and add them to the event view for both live and historical events. Note that adding many columns for customizing the table may reduce performance. Consider using fewer columns for faster data retrieval.

Alternatively, click the + icon next to an event to expand it and view the hidden columns. Note that some of the event fields displayed when you expand an event can have a different name compared to the corresponding column name. To correlate the events fields displayed when you expand an event to the corresponding column name, see Correlate Threat Defense Event Fields and Column Names.

Reorder the Columns

You can reorder the columns of the event table. Click the column filter icon located to the right of the columns to view the list of selected columns. Then, drag and drop the columns into the order you want. The column at the top of the list in the drop-down menu appears as the left-most column in the event table.

Correlate Threat Defense Event Fields and Column Names

On the Security Cloud Control Event Logging page, you can click on any event to expand its details and view all the associated event fields. Note that the names of some event fields may differ from those of the column headers in the Security Cloud Control event viewer where the values of these fields are displayed. The table below lists those threat defense event fields that have differing column names and provides a comparison between the threat defense event field and the respective column name.

Table 1. Threat Defense Event Field and the Corresponding Security Cloud Control Column Name

Security Cloud Control Column Name

FTD Event Field

Date/Time

Timestamp

Detection Type

ClientAppDetector

Encrypted Visibility Fingerprint

EVE_Fingerprint

Encrypted Visibility Process Name

EVE_Process

Encrypted Visibility Process Confidence Score

EVE_ProcessConfidencePct

Encrypted Visibility Threat Confidence

EVE_ThreatConfidenceIndex

Encrypted Visibility Threat Confidence Score

EVE_ThreatConfidencePct

MITRE

MitreAttackGroups

NAT Source IP

NAT_InitiatorIP

NAT Source Port

NAT_InitiatorPort

Rule Group

SnortRuleGroups

Show and Hide Columns on the Event Logging Page

The Event Logging page displays ASA and FTD syslog events and ASA NetFlow Secure Event Logging (NSEL) events sent to the Cisco cloud from configured ASA and FDM-managed devices.

You can show or hide columns on the Event Logging page by using the Show/Hide widget with the table:

Procedure


Step 1

In the left pane, choose Events & Logs > Events .

Step 2

Scroll to the far right of the table and click the column filter icon .

Step 3

Check the columns you want to see and uncheck the columns you want to hide.


Other users logging into the tenant will see the same columns you chose to show until columns are shown or hidden again.

This table describes the default column headers:

Column Header

Description

Date/Time

The time the device generated the event. By default, event timestamps are displayed in your Local time zone. To view event timestamps in UTC, see Change the Time Zone for the Event Timestamps

Device Type

FTD (Firepower Threat Defense)

Event Type

This composite column can have any of the following:

  • FTD Event Types

    • Connection: Displays connection events from access control rules.

    • File: Displays events reported by file policies in access control rules.

    • Intrusion: Displays events reported by intrusion policy in access control rules.

    • Malware: Displays events reported by malware policies in access control rules.

  • ASA Event Types: These event types represent groups of syslog or NetFlow events. See ASA Event Types for more information about which syslog ID or which NetFlow ID is included in which group.

    • Parsed Events: Parsed syslog events contain more event attributes than other syslog events and Security Cloud Control is able to return search results based on those attributes more quickly. Parsed events are not a filtering category; however, parsed event IDs are displayed in the Event Types column in italics. Event IDs that are not displayed in italics are not parsed.

    • ASA NetFlow Event IDs: All Netflow (NSEL) events from ASA appear here.

Sensor ID

The Sensor ID is the IP address from which events are sent to the Secure Event Connector. This is typically the Management interface on the Firepower Threat Defense or the ASA.

Initiator IP

This is the IP address of the source of the network traffic. The value of the Initiator address field corresponds to the value of the InitiatorIP field in the event details. You can enter a single address, such as 10.10.10.100, or a network defined in CIDR notation such as 10.10.10.0/24.

Responder IP

This is the destination IP address of the packet. The value of the Destination address field corresponds to the value in the ResponderIP field in the event details. You can enter a single address, such as 10.10.10.100, or a network defined in CIDR notation such as 10.10.10.0/24.

Port

The port or ICMP code used by the session responder. The value of the destination port corresponds to the value of the ResponderPort in the event details.

Protocol

It represents the protocol in the events.

Action

Specifies the security action defined by the rule. The value you enter must be an exact match to what you want to find; however, the case doesn't matter. Enter different values for connection, file, intrusion, malware, syslog, and NetFlow event types:

  • For connection event types, the filter searches for matches in the AC_RuleAction attribute. Those values could be Allow, Block, Trust.

  • For file event types, the filter searches for matches in the FileAction attribute. Those values could be Allow, Block, Trust.

  • For intrusion event types, the filter searches for matches in the InLineResult attribute. Those values could be Allowed, Blocked, Trusted.

  • For malware event types, the filter searches for matches in the FileAction attribute. Those values could be Cloud Lookup Timeout.

  • For syslog and NetFlow events types, the filter searches for matches in the Action attribute.

Policy

The name of the policy that triggered the event. Names will be different for ASA and FDM-managed devices.

Change the Time Zone for the Event Timestamps

Change the time zone display for event timestamps on the Security Cloud Control Event Logging page.

Procedure


Step 1

From the left pane, choose Events & Logs > Events.

Step 2

Click the UTC Time or Local Time button on the top right side of the Event Logging page to display the event timestamps in the selected time zone.

By default, event timestamps are displayed in your local time zone.


Customizable Event Filters

If you are a Secure Logging Analytics (SaaS) customer, you can create and save custom filters that you use frequently.

The elements of your filter are saved to a filter tab as you configure them. Whenever you return to the Event Logging page, these searches will be available to you. They will not be available to other Security Cloud Control users of the tenant. They will not be available to you on a different tenant, if you manage more than one tenant.


Note


Be aware that when you are working in a filter tab, if you modify any filter criteria, those changes are saved to your custom filter tab automatically.


Procedure


Step 1

From the main menu, choose Events & Logs > Events.

Step 2

Clear the Search field of any values.

Step 3

Above the event table, click the blue plus button to add a View tab. Filter views are labeled "View 1", "View 2", "View 3" and so on until you give them a name.

Step 4

Select a view tab.

Step 5

Open the filter bar and select the filters attributes you want in your custom filter. See Searching for and Filtering Events in the Event Logging Page. Remember that only filter attributes are saved in the custom filter.

Step 6

Customize the columns you want to show in the event logging table. See Show and Hide Columns on the Event Logging Page for a discussion of showing and hiding columns.

Step 7

Double-click the filter tab with the "View X" label and rename it.

Step 8

(Optional) Now that you have created a custom filter, you can fine tune the results displayed on the Event Logging page, without changing the custom filter, by adding search criteria to the Search field. See Searching for and Filtering Events in the Event Logging Page.


Event Attributes in Security Analytics and Logging

Event Attribute Descriptions

The event attribute descriptions used by Security Cloud Control are largely the same as what is reported by Firepower Device Manager (FDM) and Adaptive Security Device Manager (ASDM).

Some ASA syslog events are "parsed" and others have additional attributes which you can use when filtering the contents of the Event Logging table using attribute:value pairs. See these additional topics for other important attributes of syslog events:

EventGroup and EventGroupDefinition Attributes for Some Syslog Messages

Some syslog events will have the additional attributes "EventGroup" and "EventGroupDefinition". You will be able to filter the events table to find events using these additional attributes by filtering by attribute:value pairs. For example, you could filter for Application Firewall events by entering apfw:415* in the search field of the Event Logging table.

Syslog Message Classes and Associated Message ID Numbers

EventGroup

EventGroupDefinition

Syslog Message ID Numbers (first 3 digits)

aaa/auth User Authentication 109, 113
acl/session Access Lists/User Session 106
apfw Application Firewall 415
bridge Transparent Firewall 110, 220
ca PKI Certification Authority 717
citrix Citrix Client 723
clst Clustering 747
cmgr Card Management 323
config Command Interface 111, 112, 208, 308
csd Secure Desktop 724
cts Cisco TrustSec 776
dap Dynamic Access Policies 734
eap, eapoudp EAP or EAPoUDP for Network Admission Control 333, 334
eigrp EIGRP Routing 336
email E-mail Proxy 719
ipaa/envmon Environment Monitoring 735
ha Failover 101, 102, 103, 104, 105, 210, 311, 709
idfw Identity-based Firewall 746
ids Intrusion Detection System 733
ids/ips Intrusion Detection System / Intrusion Protection System 400
ikev2 IKEv2 Toolkit 750, 751, 752
ip IP Stack 209, 215, 313, 317, 408
ipaa IP Address Assignment 735
ips Intrusion Protection System 401, 420
ipv6 IPv6 325
l4tm Block lists, Allow lists, grey lists 338
lic Licensing 444
mdm-proxy MDM Proxy 802
nac Network Admission Control 731, 732
vpn/nap IKE and IPsec / Network Access Point 713
np Network Processor 319
ospf OSPF Routing 318, 409, 503, 613
passwd Password Encryption 742
pp Phone Proxy 337
rip RIP Routing 107, 312
rm Resource Manager 321
sch Smart Call Home 120
session User Session 108, 201, 202, 204, 302, 303, 304, 314, 405, 406, 407, 500, 502, 607, 608, 609, 616, 620, 703, 710
session/natpat User Session/NAT and PAT 305
snmp SNMP 212
ssafe ScanSafe 775
ssl/np ssl SSL Stack/NP SSL 725
svc SSL VPN Client 722
sys System 199, 211, 214, 216, 306, 307, 315, 414, 604, 605, 606, 610, 612, 614, 615, 701, 711, 741
tre Transactional Rule Engine 780
ucime UC-IME 339
tag-switching Service Tag Switching 779
td Threat Detection 733
vm VLAN Mapping 730
vpdn PPTP and L2TP Sessions 213, 403, 603
vpn IKE and IPsec 316, 320, 402, 404, 501, 602, 702, 713, 714, 715
vpnc VPN Client 611
vpnfo VPN Failover 720
vpnlb VPN Load Balancing 718
vxlan VXLAN 778
webfo WebVPN Failover 721
webvpn WebVPN and AnyConnect Client 716
session/natpat User Session / NAT and PAT 305

EventName Attributes for Syslog Events

Some syslog events will have the additional attribute "EventName". You will be able to filter the events table to find events using the EventName attribute by filtering by attribute:value pairs. For example, you could filter events for a "Denied IP packet" by entering EventName:"Denied IP Packet" in the search field of the Event Logging table.

Syslog Event ID and Event Names Tables

AAA Syslog Event IDs and Event Names

EventID

EventName

109001

AAA Begin

109002

AAA Failed

109003

AAA Server Failed

109005

Authentication Success

109006

Authentication Failed

109007

Authorization Success

109008

Authorization Failed

109010

AAA Pending

109011

AAA Session Started

109012

AAA Session Ended

109013

AAA

109014

AAA Failed

109016

AAA ACL not found

109017

AAA Limit Reach

109018

AAA ACL Empty

109019

AAA ACL error

109020

AAA ACL error

109021

AAA error

109022

AAA HTTP limit reached

109023

AAA auth required

109024

Authorization Failed

109025

Authorization Failed

109026

AAA error

109027

AAA Server error

109028

AAA Bypassed

109029

AAA ACL error

109030

AAA ACL error

109031

Authentication Failed

109032

AAA ACL error

109033

Authentication Failed

109034

Authentication Failed

109035

AAA Limit Reach

113001

AAA Session limit reach

113003

AAA overridden

113004

AAA Successful

113005

Authorization Rejected

113006

AAA user locked

113007

AAA User unlocked

113008

AAA successful

113009

AAA retrieved

113010

AAA Challenge received

113011

AAA retrieved

113012

Authentication Successful

113013

AAA error

113014

AAA error

113015

Authentication Rejected

113016

AAA Rejected

113017

AAA Rejected

113018

AAA ACL error

113019

AAA Disconnected

113020

AAA error

113021

AAA Logging Fail

113022

AAA Failed

113023

AAA reactivated

113024

AAA Client certification

113025

AAA Authentication fail

113026

AAA error

113027

AAA error

Botnet Syslog Event IDs and Event Names

EventID

EventName

338001

Botnet Source Block List

338002

Botnet Destination Block List

338003

Botnet Source Block List

338004

Botnet Destination Block List

338101

Botnet Source Allow List

338102

Botnet destination Allow List

338202

Botnet destination Grey

338203

Botnet Source Grey

338204

Botnet Destination Grey

338301

Botnet DNS Intercepted

338302

Botnet DNS

338303

Botnet DNS

338304

Botnet Download successful

338305

Botnet Download failed

338306

Botnet Authentication failed

338307

Botnet Decrypt failed

338308

Botnet Client

338309

Botnet Client

338310

Botnet dyn filter failed

Failover Syslog Event IDs and Event Names

EventID

EventName

101001

Failover Cable OK

101002

Failover Cable BAD

101003

Failover Cable not connected

101004

Failover Cable not connected

101005

Failover Cable reading error

102001

Failover Power failure

103001

No response from failover mate

103002

Failover mate interface OK

103003

Failover mate interface BAD

103004

Failover mate reports failure

103005

Failover mate reports self failure

103006

Failover version incompatible

103007

Failover version difference

104001

Failover role switch

104002

Failover role switch

104003

Failover unit failed

104004

Failover unit OK

106100

Permit/Denied by ACL

210001

Stateful Failover error

210002

Stateful Failover error

210003

Stateful Failover error

210005

Stateful Failover error

210006

Stateful Failover error

210007

Stateful Failover error

210008

Stateful Failover error

210010

Stateful Failover error

210020

Stateful Failover error

210021

Stateful Failover error

210022

Stateful Failover error

311001

Stateful Failover update

311002

Stateful Failover update

311003

Stateful Failover update

311004

Stateful Failover update

418001

Denied Packet to Management

709001

Failover replication error

709002

Failover replication error

709003

Failover replication start

709004

Failover replication complete

709005

Failover receive replication start

709006

Failover receive replication complete

709007

Failover replication failure

710003

Denied access to Device

Firewall Denied Syslog Event IDs and Event Names

EventID

EventName

106001

Denied by Security Policy

106002

Outbound Deny

106006

Denied by Security Policy

106007

Denied Inbound UDP

106008

Denied by Security Policy

106010

Denied by Security Policy

106011

Denied Inbound

106012

Denied due to Bad IP option

106013

Dropped Ping to PAT IP

106014

Denied Inbound ICMP

106015

Denied by Security Policy

106016

Denied IP Spoof

106017

Denied due to Land Attack

106018

Denied outbound ICMP

106020

Denied IP Packet

106021

Denied TCP

106022

Denied Spoof packet

106023

Denied IP Packet

106025

Dropped Packet failed to Detect context

106026

Dropped Packet failed to Detect context

106027

Dropped Packet failed to Detect context

106100

Permit/Denied by ACL

418001

Denied Packet to Management

710003

Denied access to Device

Firewall Traffic Syslog Event IDs and Event Names

EventID

EventName

108001

Inspect SMTP

108002

Inspect SMTP

108003

Inspect ESMTP Dropped

108004

Inspect ESMTP

108005

Inspect ESMTP

108006

Inspect ESMTP Violation

108007

Inspect ESMTP

110002

No Router found

110003

Failed to Find Next hop

209003

Fragment Limit Reach

209004

Fragment invalid Length

209005

Fragment IP discard

302003

H245 Connection Start

302004

H323 Connection start

302009

Restart TCP

302010

Connection USAGE

302012

H225 CALL SIGNAL CONN

302013

Built TCP

302014

Teardown TCP

302015

Built UDP

302016

Teardown UDP

302017

Built GRE

302018

Teardown GRE

302019

H323 Failed

302020

Built ICMP

302021

Teardown ICMP

302022

Built TCP Stub

302023

Teardown TCP Stub

302024

Built UDP Stub

302025

Teardown UDP Stub

302026

Built ICMP Stub

302027

Teardown ICMP Stub

302033

Connection H323

302034

H323 Connection Failed

302035

Built SCTP

302036

Teardown SCTP

303002

FTP file download/upload

303003

Inspect FTP Dropped

303004

Inspect FTP Dropped

303005

Inspect FTP reset

313001

ICMP Denied

313004

ICMP Drop

313005

ICMP Error Msg Drop

313008

ICMP ipv6 Denied

324000

GTP Pkt Drop

324001

GTP Pkt Error

324002

Memory Error

324003

GTP Pkt Drop

324004

GTP Version Not Supported

324005

GTP Tunnel Failed

324006

GTP Tunnel Failed

324007

GTP Tunnel Failed

337001

Phone Proxy SRTP Failed

337002

Phone Proxy SRTP Failed

337003

Phone Proxy SRTP Auth Fail

337004

Phone Proxy SRTP Auth Fail

337005

Phone Proxy SRTP no Media Session

337006

Phone Proxy TFTP Unable to Create File

337007

Phone Proxy TFTP Unable to Find File

337008

Phone Proxy Call Failed

337009

Phone Proxy Unable to Create Phone Entry

400000

IPS IP options-Bad Option List

400001

IPS IP options-Record Packet Route

400002

IPS IP options-Timestamp

400003

IPS IP options-Security

400004

IPS IP options-Loose Source Route

400005

IPS IP options-SATNET ID

400006

IPS IP options-Strict Source Route

400007

IPS IP Fragment Attack

400008

IPS IP Impossible Packet

400009

IPS IP Fragments Overlap

400010

IPS ICMP Echo Reply

400011

IPS ICMP Host Unreachable

400012

IPS ICMP Source Quench

400013

IPS ICMP Redirect

400014

IPS ICMP Echo Request

400015

IPS ICMP Time Exceeded for a Datagram

400017

IPS ICMP Timestamp Request

400018

IPS ICMP Timestamp Reply

400019

IPS ICMP Information Request

400020

IPS ICMP Information Reply

400021

IPS ICMP Address Mask Request

400022

IPS ICMP Address Mask Reply

400023

IPS Fragmented ICMP Traffic

400024

IPS Large ICMP Traffic

400025

IPS Ping of Death Attack

400026

IPS TCP NULL flags

400027

IPS TCP SYN+FIN flags

400028

IPS TCP FIN only flags

400029

IPS FTP Improper Address Specified

400030

IPS FTP Improper Port Specified

400031

IPS UDP Bomb attack

400032

IPS UDP Snork attack

400033

IPS UDP Chargen DoS attack

400034

IPS DNS HINFO Request

400035

IPS DNS Zone Transfer

400036

IPS DNS Zone Transfer from High Port

400037

IPS DNS Request for All Records

400038

IPS RPC Port Registration

400039

IPS RPC Port Unregistration

400040

IPS RPC Dump

400041

IPS Proxied RPC Request

400042

IPS YP server Portmap Request

400043

IPS YP bind Portmap Request

400044

IPS YP password Portmap Request

400045

IPS YP update Portmap Request

400046

IPS YP transfer Portmap Request

400047

IPS Mount Portmap Request

400048

IPS Remote execution Portmap Request

400049

IPS Remote execution Attempt

400050

IPS Statd Buffer Overflow

406001

Inspect FTP Dropped

406002

Inspect FTP Dropped

407001

Host Limit Reach

407002

Embryonic limit Reached

407003

Established limit Reached

415001

Inspect Http Header Field Count

415002

Inspect Http Header Field Length

415003

Inspect Http body Length

415004

Inspect Http content-type

415005

Inspect Http URL length

415006

Inspect Http URL Match

415007

Inspect Http Body Match

415008

Inspect Http Header match

415009

Inspect Http Method match

415010

Inspect transfer encode match

415011

Inspect Http Protocol Violation

415012

Inspect Http Content-type

415013

Inspect Http Malformed

415014

Inspect Http Mime-Type

415015

Inspect Http Transfer-encoding

415016

Inspect Http Unanswered

415017

Inspect Http Argument match

415018

Inspect Http Header length

415019

Inspect Http status Matched

415020

Inspect Http non-ASCII

416001

Inspect SNMP dropped

419001

Dropped packet

419002

Duplicate TCP SYN

419003

Packet modified

424001

Denied Packet

424002

Dropped Packet

431001

Dropped RTP

431002

Dropped RTCP

500001

Inspect ActiveX

500002

Inspect Java

500003

Inspect TCP Header

500004

Inspect TCP Header

500005

Inspect Connection Terminated

508001

Inspect DCERPC Dropped

508002

Inspect DCERPC Dropped

509001

Prevented No Forward Cmd

607001

Inspect SIP

607002

Inspect SIP

607003

Inspect SIP

608001

Inspect Skinny

608002

Inspect Skinny dropped

608003

Inspect Skinny dropped

608004

Inspect Skinny dropped

608005

Inspect Skinny dropped

609001

Built Local-Host

609002

Teardown Local Host

703001

H225 Unsupported Version

703002

H225 Connection

726001

Inspect Instant Message

Identity Based Firewall Syslog Event IDs and Event Names

EventID

EventName

746001

Import started

746002

Import complete

746003

Import failed

746004

Exceed user group limit

746005

AD Agent down

746006

AD Agent out of sync

746007

Netbios response failed

746008

Netbios started

746009

Netbios stopped

746010

Import user failed

746011

Exceed user limit

746012

User IP add

746013

User IP delete

746014

FQDN Obsolete

746015

FQDN resolved

746016

DNS lookup failed

746017

Import user issued

746018

Import user done

746019

Update AD Agent failed

IPSec Syslog Event IDs and Event Names

EventID

EventName

402114 Invalid SPI received
402115