New and Changed Information

Table 1 summarizes the new and changed commands for Cisco MDS NX-OS Release 6.2(1) and tells you where they are documented in the Cisco MDS 9000 Family Command Reference.

The Cisco MDS 9000 Family Command Reference applies to Cisco NX-OS Release 6.2(1), but describes all features in Cisco SAN-OS releases. If you are running Cisco SAN-OS 3.x or lower software on an MDS switch, refer to the Cisco MDS 9000 Family CLI Command Reference for the release train that applies to the release on your switch.

note.gif

Noteblank.gif As of NX-OS Release 4.1(1b), SAN-OS has been changed to NX-OS. References to SAN-OS releases before 4.1(1b) still apply.


Table 1 New and Changed Commands in the Cisco MDS 9000 Family Command Reference

Feature
Description
Where Documented

New and Changed Commands for Cisco NX-OS Release 6.2(11)

event zone

This command was introduced.

E Commands

event fcns

This command was introduced.

E Commands

event flogi

This command was introduced.

E Commands

New and Changed Commands for Cisco NX-OS Release 6.2(9)

show fc-management

This command was introduced.

Show Commands

device-alias confirm-commit enable

This command was introduced.

D Commands

zone confirm-commit enable vsan

This command was introduced.

Z Commands

show zone status

Added the combined zone database size for the command output.

Show Commands

priority-flow-control

Added the long-distance keyword to the syntax description.

P Commands

show fabric switch information vsan

Added a note.

Show Commands

show topology

Added a note.

Show Commands

show tech-support fc-management

This command was introduced.

Show Commands

show process creditmon slowport-monitor-events

This command was introduced.

Show Commands

system timeout no-credit-drop

This command was introduced.

S Commands

system timeout slowport-monitor

This command was introduced.

S Commands

pwwn (fc-management database configuration sub mode)

This command was introduced.

P Commands

fc-management database

This command was introduced.

F Commands

fc-management enable

This command was introduced.

F Commands

fcdomain

Added the optimize all and scale-restart
keywords to the syntax description.

F Commands

fcroute

This command was deprecated.

F Commands

New and Changed Commands for Cisco NX-OS Release 6.2(7)

fcns bulk-notify

This command was introduced.

F Commands

rscn coalesce swrscn vsan

This command was introduced.

R Commands

switchport

Added the keywords max-npiv-limit and trunk-max-npiv-limit to the syntax description.

Added the keyword fec and speed to the syntax description.

S Commands

system port pacer mode F interface-login-threshold

This command was introduced.

S Commands

show interface

Added the fec related command output.

Show Commands

zone convert smart-zoning

Changed the command output.

Z Commands

show fabric switch information vsan

This command was introduced.

Show Commands

New and Changed Commands for Cisco NX-OS Release 6.2(5)

destination interface

SPAN is supported and RSPAN is not supported in Cisco MDS 9250i Multiservice Fabric Switch.

D commands

show fc-tunnel

This command was deprecated.

Show Commands

fc-tunnel

All the fc-tunnel commands are not supported in Cisco MDS 9250i Multiservice Fabric Switch.

F Commands

ioa-ping

This command was introduced.

I Commands

Pathtrace

This command was introduced.

P Commands

show fcip

Added the command output for FCIP Profiles for Cisco MDS 9250i Multiservice Fabric Switch.

Show Commands

show interface capabilities

Added the Cisco MDS 9250i Multiservice Fabric Switch output to the “show interface capabilities”command.

 

show interface

Added the command output for detailed FCIP Interface Standard Counter Information, FCIP Interface Summary of Counters for a Specified Interface, brief FCIP Interface Counter Information for Cisco MDS 9250i Multiservice Fabric Switch.

 

show interface ioa

Added the show interface ioa 1/1 counters brief command to show the average for 5minutes, 12 hours and 24 hours respectively.

 

New and Changed Commands for Cisco NX-OS Release 6.2(3)

fcdomain

show fcdomain vsan command

(Changed the command output)

Show Commands

counters

Deprecated the show interface counters performance command

 

New and Changed Commands for Cisco NX-OS Release 6.2(1)

Online diagnostics (GOLD)

Added the diagnostic bootup level command

D Commands

 

Added the diagnostic monitor interval module command

 

 

Added the diagnostic monitor module command

 

 

Added the diagnostic ondemand iteraction command

 

 

Added the diagnostic ondemand action-on-failure command

 

 

Added the diagnostic start module command

 

 

Added the diagnostic stop module command

 

 

Added the show diagnostic bootup level command

Show Commands

 

Added the show diagnostic content module command

 

 

Added the show diagnostic description module command

 

 

Added the show diagnostic events command

 

 

Added the show diagnostic ondemand setting command

 

 

Added the show diagnostic result module command

 

 

Added the show diagnostic simulation module command

 

 

Added the show diagnostic status module command

 

 

Added the show hardware capacity command

 

 

Added the show module command

 

Deprecated secure erase commands

secure-erase abort job

S Commands

 

secure-erase create algorithm

 

 

secure-erase create job

 

 

secure-erase create-vi vsan

 

 

secure-erase destroy algorithm

 

 

secure-erase destroy job

 

 

secure-erase destroy-vi vsan

 

 

secure-erase start job

 

 

secure-erase stop job

 

 

secure-erase validate job

 

 

security-mode

 

 

add-session vsan

A Commands

 

add-step dynamic

 

 

add-step static

 

 

add-tgt vsan

 

 

add-vi vsan

 

 

show secure-erase vsan

Show Commands

 

show secure-erase algorithm

 

 

show secure-erase job

 

 

show secure-erase job detail

 

 

show secure-erase vsan

 

FCSP

Added the snmp-server aaa exclusive-behavior enable command

S Commands

clear snmp counters

Added the snmp option to the syntax description.

C Commands

Performance statistics

show interface

Added the performance, module and interval keywords to the syntax description.

Show Commands

Display ISL related information

Added show topology isl command.

Show Commands

Luke CLI changes

Added the monitor session command

M Commands

 

Added the output for remote span configuration on local and remote switch for fc-tunnel command

F Commands

 

source command

Added the keywords ethernet, ethernet-port-channel, sup-eth, vlan to the syntax description.

S Commands

 

Added the show monitor session command

Show Commands

 

Depercated span session, span session source interface, suspend, span max-queued-packets commands

 

New and Changed Commands for Cisco NX-OS Release 5.2(8)

RSCN

Added the rscn permit type nport event switch-config command

R Commands

New and Changed Commands for Cisco NX-OS Release 5.2(6)

Slow drain

Added the system default interface congestion timeout command

Added the system default interface congestion mode command

Added the system default interface pause timeout command

Added the system default interface pause mode command

S Commands

Smart Zoning

Added the show zone smart-zoning auto-conv command

Show Commands

 

Added the zone smart-zoning enable command

Z Commands

 

Added the clear zone smart-zoning command

C Commands

 

Added the zone convert smart-zoning command

Z Commands

 

member (zone configuration and zoneset-zone configuration submode) Added the keywords both, initiator, target to the sysntax description

M Commands

 

Added the system default zone smart-zone enable command

S Commands

 

Added the show zone policy command

Show Commands

 

Added the show zone internal vsan command

Show Commands

 

Added the show zone internal global-info command

Show Commands

New and Changed Commands for Cisco NX-OS Release 5.2(2a)

Port Monitor

counter (port-group-monitor configuration mode) command

(Added 3 new counters to the syntax description)

C Commands

New and Changed Commands for Cisco NX-OS Release 5.2(1)

CallHome

transport http proxy enable command

T Commands
 

transport http proxy server command

 

show callhome transport command

Show Commands

 

show logging command (Added a new comment)

 

out-of-service command (This command was deprecated)

O Commands

 

out-of-service module command (Applicable for supervisor module only)

 

out-of-service xbar command (This command was deprecated)

New and Changed Commands for Cisco NX-OS Release 5.0(1a)

AAA enhancements

radius-server test command

R Commands

 

tacacs-server test command

T Commands

 

aaa authentication login chap enable command

A Commands

 

aaa authentication login command

(Added fallback, error, and local keywords to the syntax description)

 

show aaa authentication login chap enable command

Show commands

AAM

ivr aam register command

I Commands

 

ivr aam pre-deregister-check command

 

fc-redirect version2 enable command

F Commands

 

fc-redirect ivr-support enable command

 

show ivr aam command

Show Commands

Enhancements for Call Home

transport email mail-server command

T Commands

show callhome transport command

Show Commands

Per-command authorization with TACACS with roles support

enable command

E Commands

enable user-server-group command

feature command

(Added privilege keyword to the syntax description)

F Commands

SSH enhancements

username command

(Added the keypair and Priv-lvl keyword to the syntax description)

U Commands

show username command

Show Commands

FICON

ficon-tape-read-accelerator command

F Commands

ISAPI enhancements

ssm enable feature command

(Added a node keyword to the syntax description)

 

Cert PKI

show crypto ca remote-certstore command

Show Commands

show crypto certificatemap command

show crypto ssh-auth-map command

crypto certificatemap mapname command

C Commands

crypto cert ssh-authorize command

crypto ca lookup command

crypto ca remote ldap command

filter command

F Commands

LDAP

ldap-server deadtime command

L Commands

ldap-server port command

ldap-server timeout command

ldap-server host command

ldap-search-map command

aaa group server command

A Commands

server command

S Commands

show ldap-server command

Show Commands

show ldap-server groups command

show ldap-search-map command

 

aaa authorization ssh-certificate command

A Commands

 

aaa authorization ssh-publickey command

 

 

authentication command

 

 

auth-mechanism plain command

 

 

debug ldap command

D Commands

 

enable cert-DN-match command

E Commands

 

enable user-server-group command

 

 

deadtime (server group configuration mode) command

D Commands

 

CRLLookup command

C Commands

 

trustedcert command

T Commands

 

user-certdn-match command

U Commands

 

user-pubkey-match command

 

 

user-switch-bind command

 

 

userprofile command

 

Deprecated Command

fcc enable command

F Commands

New and Changed Commands for Cisco NX-OS Release 4.2(1)

Call Home

destination-profile command

(Deleted Avanti keyword from the syntax description. Added the Usage guideline)

D Commands

EEM

action event-default command

(Added a note)

A Commands

terminal event-manager bypass command

(Added a note)

T Commands

event command

(Added a note)

E Commands

Port Guard

errdisable detect cause bit-errors command

E Commands

errdisable detect cause credit-loss command

errdisable detect cause link-reset command

errdisable detect cause signal-loss command

errdisable detect cause sync-loss command

errdisable detect cause trustsec-violation command

 

feature command

(Added ioa keyword to the syntax description)

F Commands

AAA Enhancements

show aaa authentication login chap enable command

Show Commands

show aaa authorization all command

clear tacacs-server statistics command

C Commands

clear radius-server statistics command

aaa authentication login mschapv2 enable command

A Commands

aaa authorization command

test aaa authorization command

T Commands

terminal verify-user command

FC-redirect with IVR

show ivr aam command

Show Commands

FC-ID Visibility

show fcns database command

(Changed the command output)

IOA

ioa site-local command

I commands

 

ioa cluster command

 

interface ioa command

 

load-balancing (Cisco IOA cluster Configuration submode) command

L Commands

 

nport command

N Commands

 

node (Cisco IOA cluster node configuration submode) command

 

flowgroup command

 

 

host command

H Commands

 

trustedcert command

 

show ioa internal interface ioa command

Show Commands

 

show ioa cluster summary command

 

show interface ioa command

 

show ioa cluster command

Port Group Monitoring

show port-group-monitor active command

Show Commands

show port-group-monitor command

show port-group-monitor status command

port-group-monitor activate command

P Commands

port-group-monitor name command

port-group-monitor enable command

port-group-monitor counter command

monitor counter command

M Commands

Trustsec

show running-config callhome command

Show Commands

 

show fcsp interface command

 

fcsp esp sa command

F Commands

 

fcsp command

 

ingress-sa command

I Commands

 

interface fc command

 

egress-sa command

E Commands

 

mode command

M Commands

 

key (sa configuration submode) command

K Commands

 

salt (sa configuration submode) command

S Commands

New and Changed Commands for Cisco NX-OS Release 4.1(3a)

AAA enhancements

aaa authentication login ascii-authentication command

(enable the password aging command has been changed from aaa authentication login password-aging enable to aaa authentication login ascii-authentication)

A Commands

show aaa authentication login ascii-authentication command

(enable the password aging command has been changed from show aaa authentication login password-aging enable to show aaa authentication login ascii-authentication)

Show Commands

New and Changed Commands for Cisco NX-OS Release 4.1(3)

Call Home

destination-profile command

(Added the HTTPs URL and transport method to the syntax description)

D Commands

Port Guard

errdisable detect cause link-down command

E Commands

Port Owner

switchport owner command

S Commands

F port Trunking

command

(Added Keywords hhtp-server, fport-channel-trunk, npiv and npv to the syntax description)

F Commands

switchport command

(Added the F and NP port mode)

S Commands

show flogi database interface command

Show Commands

F port Channeling

show port-channel compatibility-parameters command

Show Commands

show port-channel consistency command

show port-channel database command

show port-channel internal command

show port-channel summary command

show port-channel usage command

channel-group command

(Deleted auto keyword from the syntax description)

C Commands

 

port-channel persistent command

(Added usage guideline)

P Commands

 

clear asic-cnt command

C Commands

 

show fcns database command

(Changed the command output for show fcns database detail)

Show Commands

Hardware

show system command

(Changed the show system uptime output)

Show Commands

Radius Configuration

radius-server host command

(Changed the command output)

R Commands

show running radius command

(Changed the command output)

Show Commands

EEM

event manager applet command

E Commands

 

errdisable detect cause bit-errors command

 

event manager policy command

 

event manager environment command

 

description command

D Commands

 

show event manager policy command

Show Commands

 

show event manager environment command

 

action cli command

A Commands

 

action counter command

 

action event-default command

 

action exception log command

 

action forceshut command

 

action overbudgetshut command

 

action policy-default command

 

action reload command

 

action snmp-trap commnd

 

action syslog command

 

Added SME Commands

 

SME

scaling batch enable command

S Commands

New and Changed Commands for Cisco NX-OS Release 4.1(1b)

Call Home

switch-priority command

(Added usage guidelines)

S Commands

system delayed-traps timer command

system delayed-traps enable mode command

system health

system health clear-errors command

S Commands

Port-monitor

show port-monitor status command

Show Commands

show port-monitor active command

SNMP

show system internal snmp lc command

SSM

ssm upgrade delay command

S Commands

SANTap

show isapi tech-support santap file command

(Added usage guidelines)

Show Commands

show santap module dvt command

show santap module dvtlun command

show santap vttbl dvt command

show santap vttbl dvt host command

SDV

show sdv command

(Changed the command output)

Show Commands

attribute failover auto command

A Commands

General Configuration

feature command

F Commands

DPVM

clear dpvm merge statistics command

C Commands

show dpvm merge statistics command

Show Commands

show dpvm merge status command

dpvm overwrite-duplicate-pwwn command

D Commands

Generation 3 Modules

do command

(Added the command output for extended receive bbcredit interface)

(Added a Note)

D Commands

show interface command

(Added the command output for bbcredit information for a switch port)

(Added the command output for interface capabilities on a 48 port line card)

Show Commands

 

show module command

(Added the command output for a module resource on a 24 port line card with all ports in shared mode)

(Added the command output for a module resource on a 24 port line card with few ports in shared mode and few port in dedicated mode)

(Added the command output for a module resource on a 12 port line card with all ports in dedicated mode)

(Added the command output for a module resource on a 12 port line card with all ports in dedicated mode and extended feature enabled)

Show Commands

Hardware

show hardware fabric-mode command

Show Commands

 

show username command

(Changed the command output from SAN-OS to NX-OS)

 

show hardware command

(Changed the command output from SAN-OS to NX-OS)

 

show copyright command

(Changed the command output from SAN-OS to NX-OS)

Deprecated Commands

(see the feature command for replacement commands)

 

crypto ike enable command

C Commands

 

dpvm enable command

D Commands

 

fabric-binding enable command

F Commands

 

fcip enable command

 

fcsp enable command

 

ficon enable command

 

ivr enable command

I Commands

 

port-security enable command

P Commands

 

sdv enable command

S Commands

 

tacacs+ enable command

T Commands

 

Added DMM Commands

DMM

dmm module job command

(Added the set-vi and modify rate keywords)

D Commands

show dmm module command

(Added the syntax description and the command output)

Show Commands

 

Added SME Commands

 

SME

cluster command

(Cluster command is replaced by the feature command)

C Commands

show tech-support sme command

(Added the command output)

Show Commands

show role command

(Added the command output)

show sme cluster

(Added the syntax description)

show sme transport command

(Added the syntax description)

show debug command

(Added the syntax description)

delete command

(Added the syntax description)

D Commands