R Commands

radius-server deadtime

[no] radius-server deadtime <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

radius-server

Configure RADIUS related parameters

deadtime

duration for which non-reachable server is skipped

i0

Length of time, in minutes

Command Mode

  • /exec/configure

radius-server directed-request

[no] radius-server directed-request

Syntax Description

no

(Optional) Negate a command or set its defaults

radius-server

Configure RADIUS related parameters

directed-request

enable direct authentication requests to server

Command Mode

  • /exec/configure

radius-server host key 0 6 7

{ { [ no ] radius-server host <hostipname> { { key { 0 <s0> | 6 <s6> | 7 <s1> | <s2> } [ pac ] [ auth-port <i0> [ acct-port <i1> ] ] } | { [ auth-port1 <i2> ] [ acct-port1 <i3> ] } } [ { authentication [ accounting [ timeout <i4> ] [ retransmit <i5> ] ] } | { [ accounting1 ] [ timeout1 <i6> ] [ retransmit1 <i7> ] } ] } | { no radius-server host <hostipname> key } }

Syntax Description

key

0

no

(Optional) Negate a command or set its defaults

radius-server

Configure RADIUS related parameters

host

RADIUS server's DNS name or its IP address

hostipname

IPV4/IPV6 address or DNS name

key

RADIUS shared secret

pac

(Optional) Secure Radius Enable

0

RADIUS shared secret(clear text)

s0

RADIUS shared secret(clear text)

accounting

(Optional) Use for accounting

retransmit

(Optional) RADIUS server retransmit count

i5

(Optional) RADIUS server retransmit count

timeout

(Optional) RADIUS server timeout period in seconds

i4

(Optional) RADIUS server timeout period in seconds

retransmit1

(Optional) RADIUS server retransmit count

i7

(Optional) RADIUS server retransmit count

auth-port

(Optional) RADIUS server's port for authentication

i0

(Optional) port number

timeout1

(Optional) RADIUS server timeout period in seconds

i6

(Optional) RADIUS server timeout period in seconds

acct-port

(Optional) RADIUS server's port for accounting

i1

(Optional) port number

accounting1

(Optional) Use for accounting

authentication

(Optional) Use for authentication

6

Radius shared secret(type-6 encrypted)

s6

Tadius shared secret(encrypted)

7

RADIUS shared secret(encrypted)

s1

RADIUS shared secret(encrypted)

auth-port1

(Optional) RADIUS server's port for authentication

i2

(Optional) port number

s2

RADIUS shared secret(clear text)

acct-port1

(Optional) RADIUS server's port for accounting

i3

(Optional) port number

Command Mode

  • /exec/configure

radius-server host test

[no] radius-server host { <hostipname> } test { { username <s0> { [ password { <s1> | 0 <s2> | 7 <s7> } [ idle-time <i1> ] ] | [ idle-time <i1> ] } } | { password { <s1> | 0 <s2> | 7 <s7> } [ idle-time <i1> ] } | { idle-time <i1> } }

Syntax Description

username

<s0>

no

(Optional) Negate a command or set its defaults

radius-server

Configure RADIUS related parameters

host

RADIUS server's DNS name or its IP address

hostipname

IPV4/IPV6 address or DNS name

test

Parameters to send test packets

s0

user name

password

(Optional) user password in test packets

s1

(Optional) user password

0

(Optional) RADIUS shared secret(clear text)

s2

(Optional) RADIUS shared secret(clear text)

7

(Optional) RADIUS shared secret(encrypted)

s7

(Optional) RADIUS shared secret(encrypted)

idle-time

(Optional) time interval for monitoring the server

i1

(Optional) time period in minutes

Command Mode

  • /exec/configure

radius-server key 0 6 7

{ { [ no ] radius-server key { 0 <s0> | 6 <s6> | 7 <s1> | <s2> } } | { no radius-server key } }

Syntax Description

no

(Optional) Negate a command or set its defaults

radius-server

Configure RADIUS related parameters

key

Global RADIUS server shared secret

0

default RADIUS shared secret(clear text)

s0

default RADIUS shared secret(clear text)

6

default RADIUS shared secret(type-6 encrypted)

s6

default RADIUS shared secret(type-6 encrypted)

7

default RADIUS shared secret(encrypted)

s1

default RADIUS shared secret(encrypted)

s2

default RADIUS shared secret(clear text)

Command Mode

  • /exec/configure

radius-server retransmit

[no] radius-server retransmit <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

radius-server

Configure RADIUS related parameters

retransmit

Global RADIUS server retransmit count

i0

Global RADIUS server retransmit count

Command Mode

  • /exec/configure

radius-server test

[no] radius-server test { { username <s0> { [ password { <s1> | 0 <s2> | 7 <s7> } [ idle-time <i1> ] ] | [ idle-time <i1> ] } } | { password { <s1> | 0 <s2> | 7 <s7> } [ idle-time <i1> ] } | { idle-time <i1> } }

Syntax Description

username

<s0>

no

(Optional) Negate a command or set its defaults

radius-server

Configure RADIUS related parameters

test

Parameters to send test packets

s0

user name

password

(Optional) user password in test packets

s1

(Optional) user password

0

(Optional) RADIUS shared secret(clear text)

s2

(Optional) RADIUS shared secret(clear text)

7

(Optional) RADIUS shared secret(encrypted)

s7

(Optional) RADIUS shared secret(encrypted)

idle-time

(Optional) time interval for monitoring the server

i1

(Optional) time period in minutes

Command Mode

  • /exec/configure

radius-server timeout

[no] radius-server timeout <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

radius-server

Configure RADIUS related parameters

timeout

Global RADIUS server timeout period in seconds

i0

RADIUS server timeout period in seconds

Command Mode

  • /exec/configure

rate-limit

rate-limit { auto | <rate_value> } | no rate-limit

Syntax Description

no

Negate a command or set its defaults

rate-limit

Set the Rate limit for SPAN packets

auto

Set the Rate limit using auto value

rate_value

Enter the percentage of the maximum rate for SPAN packets

Command Mode

  • /exec/configure/monitor-local-src /exec/configure/config-monitor /exec/configure/config-monitor-erspan-src

rate-limit cpu direction input output both pps action log

{ rate-limit cpu direction { input | output | both } pps <pps-val> action log } | { no rate-limit cpu direction [ { input | output | both } pps <pps-val> action log ] }

Syntax Description

no

Negate a command or set its defaults

rate-limit

set packet per second rate limit

cpu

Supervisor CPU limits

direction

input/output direction

input

set max input packet rate

output

set max output packet rate

both

set max input and output packet rate

pps

packet per second

pps-val

pps value

action

log action

log

write a syslog message if PPS hits rate-limit

Command Mode

  • /exec/configure/if-eth-base /exec/configure/if-eth-any /exec/configure/if-mgmt-config

rate-limit cpu direction input output both pps action log

{ rate-limit cpu direction { input | output | both } pps <pps-val> action log } | { no rate-limit cpu direction [ { input | output | both } pps <pps-val> action log ] }

Syntax Description

no

Negate a command or set its defaults

rate-limit

set packet per second rate limit

cpu

Supervisor CPU limits

direction

input/output direction

input

set max input packet rate

output

set max output packet rate

both

set max input and output packet rate

pps

packet per second

pps-val

pps value

action

log action

log

write a syslog message if PPS hits rate-limit

Command Mode

  • /exec/configure

rate-limit packet_in burst

rate-limit packet_in <packetin-val> burst <burst-val> | no rate-limit

Syntax Description

no

Negate a command or set its defaults

rate-limit

OpenFlow rate limit to controller

packet_in

packet in rate (pps)

packetin-val

packets per second

burst

Maximum number of packets to controller (pps)

burst-val

packets per second

Command Mode

  • /exec/configure/openflow/switch/sub-switch

rate-limit packet_in burst

rate-limit packet_in <packetin-val> burst <burst-val> | no rate-limit

Syntax Description

no

Negate a command or set its defaults

rate-limit

OpenFlow rate limit to controller

packet_in

packet in rate (pps)

packetin-val

packets per second

burst

Maximum number of packets to controller (pps)

burst-val

packets per second

Command Mode

  • /exec/configure/openflow/switch

rd

{ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } } | { no rd [ { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] }

Syntax Description

no

Negate a command or set its defaults

rd

VPN Route Distinguisher

ext-comm-rd-aa4nn2

VPN route distinguisher in aa4:nn or ip:nn format

ext-comm-rd-aa2nn4

VPN route distinguisher in aa:nn format

Command Mode

  • /exec/configure/evpn/evi-sr

rd auto

{ rd { auto | <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } } | { no rd [ { auto | <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] }

Syntax Description

no

Negate a command or set its defaults

rd

VPN Route Distinguisher

auto

Generate RD automatically

ext-comm-rd-aa4nn2

VPN route distinguisher in aa4:nn or ip:nn format

ext-comm-rd-aa2nn4

VPN route distinguisher in aa:nn format

Command Mode

  • /exec/configure/evpn/evi

rd auto

{ rd { auto | <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } } | { no rd [ { auto | <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] }

Syntax Description

no

Negate a command or set its defaults

rd

VPN Route Distinguisher

auto

Generate RD automatically

ext-comm-rd-aa4nn2

VPN route distinguisher in aa4:nn or ip:nn format

ext-comm-rd-aa2nn4

VPN route distinguisher in aa:nn format

Command Mode

  • /exec/configure/vrf

receiver

[no] receiver

Syntax Description

no

(Optional) Negate a command or set its defaults

receiver

Policies for a Local Receiver

Command Mode

  • /exec/configure/nbm-host-policy

receiver

[no] receiver

Syntax Description

no

(Optional) Negate a command or set its defaults

receiver

Policies for a Local Receiver

Command Mode

  • /exec/configure/nbm-vrf/nbm-host-policy

reconnect-interval

reconnect-interval <interval> | no reconnect-interval [ <interval> ]

Syntax Description

no

Negate a command or set its defaults

reconnect-interval

Configure connection reconnect interval

interval

Interval in seconds

Command Mode

  • /exec/configure/router-bgp/vrf-cmds

record-route

[no] record-route

Syntax Description

no

(Optional) Negate a command or set its defaults

record-route

record the route used by the tunnel

Command Mode

  • /exec/configure/if-te /exec/configure/tunnel-te/cbts-member

record-route

[no] record-route

Syntax Description

no

(Optional) Negate a command or set its defaults

record-route

Record the route used by the LSP

Command Mode

  • /exec/configure/te/lsp-attr

record

[no] record <recordname>

Syntax Description

record

Specify FTE Record to use

recordname

Name of record

Command Mode

  • /exec/configure/config-fte-monitor

record

[no] record <recordname>

Syntax Description

record

Specify INT Record to use

recordname

Name of record

Command Mode

  • /exec/configure/config-int-monitor

record

[no] record <recordname>

Syntax Description

record

Specify Flow Record to use

recordname

Name of record

Command Mode

  • /exec/configure/nfm-monitor

record

[no] record <recordname>

Syntax Description

record

Record to be monitored

recordname

Record name to be configured

Command Mode

  • /exec/configure/config-ssx-monitor

record

[no] record <recordname>

Syntax Description

record

Specify Flow Record to use

recordname

Name of record

Command Mode

  • /exec/configure/nfm-monitor

record netflow-original

[no] record netflow-original

Syntax Description

record

Specify Flow Record to use

netflow-original

Traditional IPv4 input NetFlow with origin ASs

Command Mode

  • /exec/configure/nfm-monitor

record netflow

[no] record netflow { layer2-switched { input } }

Syntax Description

record

Specify Flow Record to use

netflow

Traditional NetFlow collection schemes

layer2-switched

Traditional L2 NetFlow collection schemes

input

Input NetFlow

Command Mode

  • /exec/configure/nfm-monitor

record netflow

[no] record netflow { ipv4 { original-input } }

Syntax Description

record

Specify Flow Record to use

netflow

Traditional NetFlow collection schemes

ipv4

Traditional IPv4 NetFlow collection schemes

original-input

Traditional IPv4 input NetFlow

Command Mode

  • /exec/configure/nfm-monitor

record netflow

[no] record netflow { ipv6 { original-input } }

Syntax Description

record

Specify Flow Record to use

netflow

Traditional NetFlow collection schemes

ipv6

IPv6 collection schemes

original-input

Input NetFlow

Command Mode

  • /exec/configure/nfm-monitor

record netflow protocol-port

[no] record netflow protocol-port

Syntax Description

record

Specify Flow Record to use

netflow

Traditional NetFlow collection schemes

protocol-port

Protocol and Ports aggregation scheme

Command Mode

  • /exec/configure/nfm-monitor

redistribute filter route-map

[no] redistribute filter route-map { <map-name> | <rtr_pol_name> }

Syntax Description

no

(Optional) Negate a command or set its defaults

redistribute

Redistribute information from another routing protocol

filter

Filter redistributed routes

route-map

Route-map to constrain redistribution

map-name

A 'routing-rules' route-map name

rtr_pol_name

An existing routing-rules policy

Command Mode

  • /exec/configure/otv-isis/otv-isis-vrf-common

redistribute filter route-map

[no] redistribute filter route-map { <map-name> | <rtr_pol_name> }

Syntax Description

no

(Optional) Negate a command or set its defaults

redistribute

Redistribute information from another routing protocol

filter

Filter redistributed routes

route-map

Route-map to constrain redistribution

map-name

A 'routing-rules' route-map name

rtr_pol_name

An existing routing-rules policy

Command Mode

  • /exec/configure/l2mp-isis/l2mp-isis-vrf-common

redistribute maximum-prefix

{ redistribute maximum-prefix <maximum> [ <threshold> ] [ warning-only | withdraw [ <retries> <timeout> ] ] } | { no redistribute maximum-prefix <maximum> [ <threshold> ] [ warning-only | withdraw [ <retries> <timeout> ] ] }

Syntax Description

no

Negate a command or set its defaults

redistribute

Redistribute information from another routing protocol

maximum-prefix

Maximum number of prefixes redistributed to protocol

maximum

Maximum number of IP prefixes redistributed

threshold

(Optional) Threshold value (%) at which to generate a warning message

warning-only

(Optional) Log a warning message when limit is exceeded

withdraw

(Optional) Withdraw all redistributed routes

retries

(Optional) Number of times to retry to get the redistributed routes again

timeout

(Optional) Timeout between each retries

Command Mode

  • /exec/configure/router-ospf /exec/configure/router-ospf/vrf

redistribute maximum-prefix

redistribute maximum-prefix <maximum> [ <threshold> ] [ warning-only | withdraw [ <retries> <timeout> ] ] | no redistribute maximum-prefix [ <maximum> [ <threshold> ] [ warning-only | withdraw [ <retries> <timeout> ] ] ]

Syntax Description

no

Negate a command or set its defaults

redistribute

Redistribute information from another routing protocol

maximum-prefix

Max number of prefixes redistributed

maximum

max number

threshold

(Optional) Threshold in %, at which message is generated

warning-only

(Optional) Warning msg is logged when max is reached

withdraw

(Optional) Withdraw all redistributed routes

retries

(Optional) No of times to retry to get redist routes again

timeout

(Optional) Time between the retries

Command Mode

  • /exec/configure/router-isis/router-isis-af-ipv4

redistribute maximum-prefix

redistribute maximum-prefix <maximum> [ <threshold> ] [ warning-only | withdraw [ <retries> <timeout> ] ] | no redistribute maximum-prefix [ <maximum> [ <threshold> ] [ warning-only | withdraw [ <retries> <timeout> ] ] ]

Syntax Description

no

Negate a command or set its defaults

redistribute

Redistribute information from another routing protocol

maximum-prefix

Max number of prefixes redistributed

maximum

max number

threshold

(Optional) Threshold in %, at which message is generated

warning-only

(Optional) Warning msg is logged when max is reached

withdraw

(Optional) Withdraw all redistributed routes

retries

(Optional) No of times to retry to get redist routes again

timeout

(Optional) Time between the retries

Command Mode

  • /exec/configure/router-isis/router-isis-af-ipv6

redistribute maximum-prefix

{ redistribute maximum-prefix <maximum> [ <threshold> ] [ warning-only | withdraw [ <retries> <timeout> ] ] } | { no redistribute maximum-prefix }

Syntax Description

no

Negate a command or set its defaults

redistribute

Redistribute information from another routing protocol

maximum-prefix

Maximum number of prefixes redistributed to protocol

maximum

Maximum number of IP prefixes redistributed

threshold

(Optional) Threshold value (%) at which to generate a warning message

warning-only

(Optional) Log a warning message when limit is exceeded

withdraw

(Optional) Withdraw all redistributed routes

retries

(Optional) Number of times to retry to get the redistributed routes again

timeout

(Optional) Timeout between each retries

Command Mode

  • /exec/configure/router-ospf3/router-ospf3-af-ipv6 /exec/configure/router-ospf3/vrf/router-ospf3-af-ipv6

redistribute maximum-prefix

redistribute maximum-prefix <maximum> [ <threshold> ] [ warning-only | withdraw [ <retries> <timeout> ] ] | no redistribute maximum-prefix [ <maximum> [ <threshold> ] [ warning-only | withdraw [ <retries> <timeout> ] ] ]

Syntax Description

no

Negate a command or set its defaults

redistribute

Redistribute information from another routing protocol

maximum-prefix

Max number of prefixes redistributed

maximum

max number

threshold

(Optional) Threshold in %, at which message is generated

warning-only

(Optional) Warning msg is logged when threshold is reached

withdraw

(Optional) Withdraw all redistributed routes

retries

(Optional) Number of attempts to receive redistributed routes after max is reached

timeout

(Optional) Retry interval

Command Mode

  • /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

redistribute route-map

[no] redistribute { static | direct | amt | lisp | am | hmm | { { eigrp | isis | ospfv3 | rip } <tag> } } route-map <rmap-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

redistribute

Configure redistribution

static

Static routes

direct

Directly connected

isis

ISO IS-IS

ospfv3

Open Shortest Path First, version 3 (OSPFv3)

rip

Routing Information Protocol (RIP)

eigrp

Enhanced Interior Gateway Protocol

amt

AMT anycast prefix

lisp

LISP EID-prefixes in the non-default VRF

hmm

HMM prefix

am

AM routes (learned via ARP)

route-map

Route-map applied to redistributed routes

rmap-name

Route-map name

tag

Source protocol tag

Command Mode

  • /exec/configure/router-bgp/router-bgp-af-ipv6 /exec/configure/router-bgp/router-bgp-vrf-af-ipv6

redundancy-group

[no] redundancy-group

Syntax Description

no

(Optional) Negate a command or set its defaults

redundancy-group

Configure a redundancy-group node

Command Mode

  • /exec/configure/if-nve

reference-bandwidth

[no] reference-bandwidth { <ref-bw-mbps> [ Mbps ] | <ref-bw-gbps> Gbps }

Syntax Description

no

(Optional) Negate a command or set its defaults

reference-bandwidth

Change reference bandwidth used for setting interface metric

ref-bw-mbps

Bandwidth in Mbps (Default)

Mbps

(Optional) Specify in Mbps

ref-bw-gbps

Bandwidth in Gbps

Gbps

Specify in Gbps

Command Mode

  • /exec/configure/router-isis/router-isis-vrf-common

reference-bandwidth

[no] reference-bandwidth { <ref-bw-mbps> [ Mbps ] | <ref-bw-gbps> Gbps }

Syntax Description

no

(Optional) Negate a command or set its defaults

reference-bandwidth

Change reference bandwidth used for setting interface metric

ref-bw-mbps

Bandwidth in Mbps (Default)

Mbps

(Optional) Specify in Mbps

ref-bw-gbps

Bandwidth in Gbps

Gbps

Specify in Gbps

Command Mode

  • /exec/configure/l2mp-isis/l2mp-isis-vrf-common /exec/configure/l2mp-isis/l2mp-isis-l2-topo

register-database-mapping

{ [ no ] register-database-mapping }

Syntax Description

no

(Optional) Negate a command or set its defaults

register-database-mapping

Register database-mapping EID-prefix to Map-Server

Command Mode

  • /exec/configure/lisp-dynamic-eid /exec/configure/vrf/lisp-dynamic-eid

register-route-notifications

{ [ no ] register-route-notifications }

Syntax Description

no

(Optional) Negate a command or set its defaults

register-route-notifications

Register more-specific routes of the database-mapping EID-prefix to Map-Server

Command Mode

  • /exec/configure/lisp-dynamic-eid /exec/configure/vrf/lisp-dynamic-eid

reload

reload

Syntax Description

reload

reboot the entire box

Command Mode

  • /exec

reload cancel

reload cancel

Syntax Description

reload

reboot the entire box

cancel

Cancel scheduling of the reload

Command Mode

  • /exec

reload in

reload in <secs>

Syntax Description

reload

reboot the entire box

in

Schedule a reload after some time

secs

Reload after n seconds

Command Mode

  • /exec

reload non-interruptive

reload non-interruptive

Syntax Description

reload

reboot the entire box

non-interruptive

Reboot without interruption

Command Mode

  • /exec

reload power-cycle

reload power-cycle

Syntax Description

reload

reboot the entire box

power-cycle

Power cycle ADM

Command Mode

  • /exec

reload sync-adjacency

reload sync-adjacency

Syntax Description

reload

reboot the entire box

sync-adjacency

Reload with sync adjacency

Command Mode

  • /exec

reload timer

reload timer <secs>

Syntax Description

reload

reboot the entire box

timer

reboot after a delay <5-3600> seconds

secs

delay in seconds

Command Mode

  • /exec

remark

{ [ <seqno> ] | no } remark <comment>

Syntax Description

no

Negate a command or set its defaults

seqno

(Optional) Sequence number

remark

Access list entry comment

comment

Comment, up to 100 characters

Command Mode

  • /exec/configure/macacl

remark

{ [ <seqno> ] | no } remark <comment>

Syntax Description

no

Negate a command or set its defaults

seqno

(Optional) Sequence number

remark

Access list entry comment

comment

Comment, up to 100 characters

Command Mode

  • /exec/configure/arpacl /exec/configure/timerange

remark

{ [ <seqno> ] | no } remark <comment>

Syntax Description

no

Negate a command or set its defaults

seqno

(Optional) Sequence number

remark

Access list entry comment

comment

Comment, up to 100 characters

Command Mode

  • /exec/configure/ipacl /exec/configure/ipv6acl

remote-as

{ remote-as <asn> } | { { no | default } remote-as [ <asn> ] }

Syntax Description

no

Negate a command or set its defaults

default

Inherit values from a peer template

remote-as

Specify Autonomous System Number of the neighbor

asn

Autonomous System Number

Command Mode

  • /exec/configure/router-bgp/router-bgp-neighbor-sess

remove-private-as

[ no | default ] remove-private-as [ all | replace-as ]

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

remove-private-as

Remove private AS number from outbound updates

all

(Optional) All

replace-as

(Optional) Replace

Command Mode

  • /exec/configure/router-bgp/router-bgp-neighbor-sess

reoptimize events link-up

[no] reoptimize events link-up | no reoptimize timers { delay { cleanup | installation } | frequency } | reoptimize timers { delay { cleanup <clean_sec> | installation <inst_sec> } | frequency <freq_sec> }

Syntax Description

no

(Optional) Negate a command or set its defaults

reoptimize

Reoptimization parameters

events

Reoptimization triggers

link-up

Reoptimize tunnels on link up events

timers

Reoptimization timers

delay

Delay reoptimization action

cleanup

Delay cleanup of reoptimized LSP

clean_sec

seconds to delay cleanup of replaced tunnel LSP

installation

Delay replacement of current LSP by reoptimized LSP

inst_sec

seconds to delay replacement of tunnel LSP

frequency

Interval between reoptimization scans

freq_sec

seconds between reoptimizations (0 disables reoptimization)

Command Mode

  • /exec/configure/te

replay-protection

[no] replay-protection

Syntax Description

replay-protection

Enable replay-protection (the default use the no form to disable)

Command Mode

  • /exec/configure/cts-dot1x /exec/configure/cts-manual

report

report [ detail ]

Syntax Description

report

Show trigger report summary

detail

(Optional) Show detailed trigger report

Command Mode

  • /exec/elamtah/insel7

report

report [ detail ]

Syntax Description

report

Show trigger report summary

detail

(Optional) Show detailed trigger report

Command Mode

  • /exec/elamtah/insel6

report

report [ detail ]

Syntax Description

report

Show trigger report summary

detail

(Optional) Show detailed trigger report

Command Mode

  • /exec/elamtah/insel8

report

report [ detail ]

Syntax Description

report

Show trigger report summary

detail

(Optional) Show detailed trigger report

Command Mode

  • /exec/elamtah/insel9

report

report [ detail ]

Syntax Description

report

Show trigger report summary

detail

(Optional) Show detailed trigger report

Command Mode

  • /exec/elamtah/insel10

report

report [ detail ]

Syntax Description

report

Show trigger report summary

detail

(Optional) Show detailed trigger report

Command Mode

  • /exec/elamtah/insel19

report

report [ detail ]

Syntax Description

report

Show trigger report summary

detail

(Optional) Show detailed trigger report

Command Mode

  • /exec/elamtah/outsel0

report

report [ detail ]

Syntax Description

report

Show trigger report summary

detail

(Optional) Show detailed trigger report

Command Mode

  • /exec/elamtah/outsel1

report

report [ detail ]

Syntax Description

report

Show trigger report summary

detail

(Optional) Show detailed trigger report

Command Mode

  • /exec/elamtah/outsel2

report

report

Syntax Description

report

Show trigger report

Command Mode

  • /exec/elamns/sel3

report

report

Syntax Description

report

Show trigger report

Command Mode

  • /exec/elamns/sel4

report

report

Syntax Description

report

Show trigger report

Command Mode

  • /exec/elamns/sel5

report

report

Syntax Description

report

Show trigger report

Command Mode

  • /exec/elamns/sel6

report

report

Syntax Description

report

Show trigger report

Command Mode

  • /exec/elamns/sel7

report

report

Syntax Description

report

Show trigger report

Command Mode

  • /exec/elamns/outsel0

report

report

Syntax Description

report

Show trigger report

Command Mode

  • /exec/elamns/outsel5

request-data-size

{ { no | default } request-data-size | request-data-size <bytes-in-payload> }

Syntax Description

no

default

Set a command to its defaults

request-data-size

Request data size

bytes-in-payload

Number of bytes in payload

Command Mode

  • /exec/configure/ip-sla/icmpEcho

request-data-size

{ { no | default } request-data-size | request-data-size <bytes-in-payload> }

Syntax Description

no

default

Set a command to its defaults

request-data-size

Request data size

bytes-in-payload

Number of bytes in payload

Command Mode

  • /exec/configure/ip-sla/udp

request-data-size

{ { no | default } request-data-size | request-data-size <bytes-in-payload> }

Syntax Description

no

default

Set a command to its defaults

request-data-size

Request data size

bytes-in-payload

Number of bytes in payload

Command Mode

  • /exec/configure/ip-sla/jitter

resequence access

resequence { { <ip_ipv6_mac_arp> access-list } | time-range } <name> <number> <increment>

Syntax Description

resequence

Resequence a list with sequence numbers

ip_ipv6_mac_arp

IP/IPv6/MAC/ARP

access-list

Resequence an access list

time-range

Resequence a time-range

name

List name

number

Starting sequence number

increment

Step to increment the sequence number

Command Mode

  • /exec/configure

reset

reset

Syntax Description

reset

Reset Trigger conditions

Command Mode

  • /exec/elamns/sel6

reset

reset

Syntax Description

reset

Reset Trigger Filters

Command Mode

  • /exec/elamtah/insel6

reset

reset

Syntax Description

reset

Reset Trigger Filters

Command Mode

  • /exec/elamtah/insel7

reset

reset

Syntax Description

reset

Reset Trigger Filters

Command Mode

  • /exec/elamtah/insel8

reset

reset

Syntax Description

reset

Reset Trigger Filters

Command Mode

  • /exec/elamtah/insel9

reset

reset

Syntax Description

reset

Reset Trigger Filters

Command Mode

  • /exec/elamtah/insel10

reset

reset

Syntax Description

reset

Reset Trigger Filters

Command Mode

  • /exec/elamtah/insel19

reset

reset

Syntax Description

reset

Reset Trigger conditions

Command Mode

  • /exec/elamtah/outsel0

reset

reset

Syntax Description

reset

Reset Trigger conditions

Command Mode

  • /exec/elamtah/outsel1

reset

reset

Syntax Description

reset

Reset Trigger conditions

Command Mode

  • /exec/elamtah/outsel2

reset

reset

Syntax Description

reset

Reset Trigger conditions

Command Mode

  • /exec/elamns/sel3

reset

reset

Syntax Description

reset

Reset Trigger conditions

Command Mode

  • /exec/elamns/sel4

reset

reset

Syntax Description

reset

Reset Trigger conditions

Command Mode

  • /exec/elamns/sel5

reset

reset

Syntax Description

reset

Reset Trigger conditions

Command Mode

  • /exec/elamns/sel7

reset

reset

Syntax Description

reset

Reset Trigger conditions

Command Mode

  • /exec/elamns/outsel0

reset

reset

Syntax Description

reset

Reset Trigger conditions

Command Mode

  • /exec/elamns/outsel5

restart amt

restart amt

Syntax Description

restart

Manually restart a component

amt

Restart the AMT multicast routing protocol

Command Mode

  • /exec

restart bgp

restart bgp <as>

Syntax Description

restart

Manually restart a component

bgp

Border Gateway Protocol (BGP)

as

Autonomous

Command Mode

  • /exec

restart eigrp

restart eigrp <eigrp-ptag>

Syntax Description

restart

Manually restart a component

eigrp

Enhanced Interior Gateway Routing Protocol (EIGRP)

eigrp-ptag

Process tag

Command Mode

  • /exec

restart fabric_mcast

restart { fabric_mcast | ngmvpn }

Syntax Description

restart

Manually restart a component

fabric_mcast

Restart NGMVPN

ngmvpn

Restart NGMVPN

Command Mode

  • /exec

restart fabricpath domain

restart fabricpath domain

Syntax Description

restart

Manually restart a component

fabricpath

Data Center Intermediate System to Intermediate System (L2MP-IS-IS)

domain

Fabricpath IS-IS domain

Command Mode

  • /exec

restart igmp

restart igmp

Syntax Description

restart

Manually restart a component

igmp

Restart the IGMP multicast routing protocol

Command Mode

  • /exec

restart isis

restart isis <tag>

Syntax Description

restart

Manually restart a component

isis

Intermediate System to Intermediate System (IS-IS)

tag

Routing process tag

Command Mode

  • /exec

restart msdp

restart msdp

Syntax Description

restart

Manually restart a component

msdp

Restart the MSDP multicast routing protocol

Command Mode

  • /exec

restart ospf

restart ospf <tag>

Syntax Description

restart

Manually restart a component

ospf

Open Shortest Path First (OSPF)

tag

Process tag

Command Mode

  • /exec

restart ospfv3

restart ospfv3 <tag>

Syntax Description

restart

Manually restart a component

ospfv3

Open Shortest Path First (OSPF) (Version 3)

tag

Process tag

Command Mode

  • /exec

restart otv-isis

restart otv-isis <tag>

Syntax Description

restart

Manually restart a component

otv-isis

Intermediate System to Intermediate System (IS-IS)

tag

Routing process tag

Command Mode

  • /exec

restart pim

restart pim

Syntax Description

restart

Manually restart a component

pim

Restart the PIM multicast routing protocol

Command Mode

  • /exec

restart pim6

restart pim6

Syntax Description

restart

Manually restart a component

pim6

Restart the PIM6 multicast routing protocol

Command Mode

  • /exec

restart rip

restart rip <tag>

Syntax Description

restart

Manually restart a component

rip

Routing Information Protocol (RIP)

tag

Process ID

Command Mode

  • /exec

restart rsvp

restart rsvp

Syntax Description

restart

Manually restart a process

rsvp

RSVP process

Command Mode

  • /exec

resync-database

resync-database

Syntax Description

resync-database

Re-synchronize switch-profile database

Command Mode

  • /exec/configure

retain route-target all

[no] retain route-target { all | route-map <rmap-name> }

Syntax Description

no

(Optional) Negate a command or set its defaults

retain

Retain the routes based on Target VPN Extended Communities

route-target

Specify Target VPN Extended Communities

all

All the routes regardless of Target-VPN community

route-map

Apply route-map to filter routes

rmap-name

Route-map name

Command Mode

  • /exec/configure/router-bgp/router-bgp-af-l2vpn-vpls

retain route-target all

[no] retain route-target { all | route-map <rmap-name> }

Syntax Description

no

(Optional) Negate a command or set its defaults

retain

Retain the routes based on Target VPN Extended Communities

route-target

Specify Target VPN Extended Communities

all

All the routes regardless of Target-VPN community

route-map

Apply route-map to filter routes

rmap-name

Route-map name

Command Mode

  • /exec/configure/router-bgp/router-bgp-af-vpnv4 /exec/configure/router-bgp/router-bgp-af-vpnv6 /exec/configure/router-bgp/router-bgp-af-link-state /exec/configure/router-bgp/router-bgp-af-l2vpn-evpn /exec/configure/router-bgp/router-bgp-af-ipv4-mvpn /exec/configure/router-bgp/router-bgp-af-ipv6-mvpn

retransmit-interval

{ { retransmit-interval <interval> } | { no retransmit-interval [ <interval> ] } }

Syntax Description

no

Negate a command or set its defaults

retransmit-interval

Packet retransmission interval

interval

(seconds)

Command Mode

  • /exec/configure/router-ospf3/router-ospf3-vlink /exec/configure/router-ospf3/vrf/router-ospf3-vlink

retransmit-interval

{ { retransmit-interval <interval> } | { no retransmit-interval [ <interval> ] } }

Syntax Description

no

Negate a command or set its defaults

retransmit-interval

Packet retransmission interval

interval

(seconds)

Command Mode

  • /exec/configure/router-ospf/router-ospf-vlink /exec/configure/router-ospf/vrf/router-ospf-vlink

retransmit-interval

{ { retransmit-interval <interval> } | { no retransmit-interval [ <interval> ] } }

Syntax Description

no

Negate a command or set its defaults

retransmit-interval

Packet retransmission interval

interval

(seconds)

Command Mode

  • /exec/configure/router-ospf/vrf/router-ospf-slink

revision

revision <rev-id> | no revision [ <rev-id> ]

Syntax Description

no

Negate a command or set its defaults

revision

Set configuration revision number

rev-id

Configuration revision number

Command Mode

  • /exec/configure/spanning-tree/mst/configuration

revocation-check crl

[no] revocation-check { crl [ none ] | none }

Syntax Description

no

(Optional) Negate a command or set its defaults

revocation-check

Configure trustpoint revocation check methods

crl

Configure revocation check using crl

none

(Optional) Configure revocation check using none

none

Configure revocation check using none

Command Mode

  • /exec/configure/trustpoint

rewrite-evpn-rt-asn

[ no | default ] rewrite-evpn-rt-asn

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

rewrite-evpn-rt-asn

Auto generate RTs for EBGP neighbor

Command Mode

  • /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-evpn

rewrite-rt-asn

[ no | default ] rewrite-rt-asn

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

rewrite-rt-asn

Auto generate RTs for EBGP neighbor

Command Mode

  • /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mvpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-mvpn

rfc1583compatibility

[no] rfc1583compatibility

Syntax Description

no

(Optional) Negate a command or set its defaults

rfc1583compatibility

Configure 1583 compatibility for external path preferences

Command Mode

  • /exec/configure/router-ospf /exec/configure/router-ospf/vrf

rip shutdown

[no] rip shutdown

Syntax Description

no

(Optional) Negate a command or set its defaults

rip

RIP configuration commands

shutdown

Shutdown RIP on this interface

Command Mode

  • /exec/configure/if-igp

rmdir

rmdir { <uri0> | <uri1> }

Syntax Description

rmdir

Delete a directory

uri0

Delete a directory

uri1

Delete a directory on expansion flash

Command Mode

  • /exec

rmon alarm absolute rising-threshold falling-threshold

rmon alarm <i0> <s0> <i1> { absolute | delta } rising-threshold <i2> [ <i3> ] falling-threshold <i4> [ <i5> ] [ owner <s1> ] | no rmon alarm <i0>

Syntax Description

no

Negate a command or set its defaults

rmon

Remote Monitoring

alarm

Configure an RMON alarm

i0

Alarm number

s0

MIB object to monitor

i1

Sample interval

absolute

Test each sample directly

delta

Test delta between samples

rising-threshold

Configure the rising threshold

i2

Rising threshold value

i3

(Optional) Event to fire on rising threshold crossing

falling-threshold

Configure the falling threshold

i4

Falling threshold value

i5

(Optional) Event to fire on falling threshold crossing

owner

(Optional) Specify an owner for the alarm

s1

(Optional) Alarm owner

Command Mode

  • /exec/configure

rmon event

rmon event <i0> [ log ] [ trap <s0> ] [ description <s1> ] [ owner <s2> ] | no rmon event <i0>

Syntax Description

no

Negate a command or set its defaults

rmon

Remote Monitoring

event

Configure an RMON event

i0

Event number

log

(Optional) Generate RMON log when the event fires

trap

(Optional) Generate SNMP trap when event fires

s0

(Optional) SNMP community string

description

(Optional) Specify a description of the event

s1

(Optional) Event description

owner

(Optional) Specify an owner for the event

s2

(Optional) Event owner

Command Mode

  • /exec/configure

rmon hcalarm absolute startupalarm rising-threshold falling-threshold owner

rmon hcalarm <i0> <s0> <i1> { absolute | delta } startupalarm <i2> rising-threshold <i3> <i4> falling-threshold <i5> <i6> owner <s1> | no rmon hcalarm <i0>

Syntax Description

no

Negate a command or set its defaults

rmon

Remote Monitoring

hcalarm

Configure an High Capacity RMON alarm

i0

Alarm number

s0

MIB object to monitor

i1

Sample interval

absolute

Test each sample directly

delta

Test delta between samples

startupalarm

Configure alarm type

i2

Startup alarm type, rising(1) falling(2) risingorfalling(3)

rising-threshold

Configure the rising threshold

i3

Rising threshold value in bytes

i4

Event to fire on rising threshold crossing

falling-threshold

Configure the falling threshold

i5

Falling threshold value in bytes

i6

Event to fire on falling threshold crossing

owner

Specify an owner for the alarm

s1

Alarm owner

Command Mode

  • /exec/configure

roaming-eid-prefix

{ [ no ] roaming-eid-prefix { <eid-prefix> | <eid-prefix6> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

roaming-eid-prefix

Configures what EID-prefixes allowed to roam

eid-prefix

IPv4 roaming EID-prefix

Command Mode

  • /exec/configure/lisp-dynamic-eid /exec/configure/vrf/lisp-dynamic-eid

role feature-group name

[no] role feature-group name <arg6>

Syntax Description

no

(Optional) Negate a command or set its defaults

role

Configure roles

feature-group

Configure role feature-group

name

Feature-group name

arg6

Enter feature-group name

Command Mode

  • /exec/configure

role name

[no] role name <arg2>

Syntax Description

no

(Optional) Negate a command or set its defaults

role

Configure roles

name

Enter the role name

arg2

Enter the role name

Command Mode

  • /exec/configure

role priority

role priority <priority_value> | no role priority

Syntax Description

no

Negate a command or set its defaults

role

Role related configuration

priority

Configure priority to be used during vPC role (primary/secondary) election

priority_value

specify priority value

Command Mode

  • /exec/configure/vpc-domain

rollback running-config checkpoint

rollback running-config { checkpoint <chkpoint_name> | file <file_uri> } [ best-effort | stop-at-first-failure | atomic ] [ verbose ]

Syntax Description

rollback

Rollback configuration

running-config

Rollback running configuration

checkpoint

Rollback running configuration to checkpoint

chkpoint_name

Checkpoint name

file

Rollback running configuration to configuration file

file_uri

Checkpoint file path

best-effort

(Optional) Skip errors and proceed with rollback

stop-at-first-failure

(Optional) Stop rollback at the first error

atomic

(Optional) Stop rollback and revert to original configuration (default)

verbose

(Optional) Show the execution log

Command Mode

  • /exec

root-priority

[no] root-priority <root-pri>

Syntax Description

no

(Optional) Negate a command or set its defaults

root-priority

Set priority with which nodes becomes root

root-pri

Root priority value per topology

Command Mode

  • /exec/configure/l2mp-isis/l2mp-isis-vrf-common /exec/configure/l2mp-isis/l2mp-isis-l2-topo

route-map

[no] route-map { <rtmap-name> | <rtmap-name> } [ permit | deny ] <seq>

Syntax Description

no

Negate a command or set its defaults

route-map

Create route-map or enter route-map command mode

rtmap-name

Route-map name

rtmap-name

Known route-map name

permit

(Optional) Route map permits set operations

deny

(Optional) Route map denies set operations

seq

Sequence to insert to/delete from existing route-map entry

Command Mode

  • /exec/configure

route-map

route-map <rtmap-name> [ permit | deny ]

Syntax Description

route-map

Create route-map or enter route-map command mode

rtmap-name

Route-map name

permit

(Optional) Route map permits set operations

deny

(Optional) Route map denies set operations

Command Mode

  • /exec/configure

route-map

route-map <rtmap-name> [ permit | deny ] <seq>

Syntax Description

route-map

Create route-map or enter route-map command mode

rtmap-name

Route-map name

permit

(Optional) Route map permits set operations

deny

(Optional) Route map denies set operations

seq

Sequence to insert to/delete from existing route-map entry

Command Mode

  • /exec/configure

route-map

[no] route-map { <rtmap-name> | <rtmap-name> } [ permit | deny ]

Syntax Description

no

Negate a command or set its defaults

route-map

Create route-map or enter route-map command mode

rtmap-name

Route-map name

rtmap-name

Known route-map name

permit

(Optional) Route map permits set operations

deny

(Optional) Route map denies set operations

Command Mode

  • /exec/configure

route-map out

[ no | default ] route-map <rmap-name> { out | in }

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

route-map

Apply route-map to neighbor

rmap-name

Route-map name

out

Apply policy to outgoing routes

in

Apply policy to incoming routes

Command Mode

  • /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv4 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mdt /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv6 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-vpls /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mvpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-mvpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-evpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-label /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-label

route-map pbr-statistics

route-map <route-map-name> pbr-statistics | no route-map { <route-map-name> | <route-map-name> } pbr-statistics

Syntax Description

no

Negate a command or set its defaults

route-map

Create route-map or enter route-map command mode

route-map-name

Route-map name

route-map-name

Route-map name

route-map-name

Known route-map name

pbr-statistics

Statistics for policy based routing

Command Mode

  • /exec/configure

route-reflector-client

[ no | default ] route-reflector-client

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

route-reflector-client

Configure a neighbor as Route reflector client

Command Mode

  • /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-evpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv4 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv6 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mvpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-mvpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-link-state /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-label /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-label

route-reflector-client

[ no | default ] route-reflector-client

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

route-reflector-client

Configure a neighbor as Route reflector client

Command Mode

  • /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mdt /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-vpls

route-target both

{ route-target both { <ext-comm-rt-aa2nn4> | <ext-comm-rt-aa4nn2> } } | { no route-target both { <ext-comm-rt-aa2nn4> | <ext-comm-rt-aa4nn2> } }

Syntax Description

no

Negate a command or set its defaults

route-target

Specify Target VPN Extended Communities

both

Export and Import Target-VPN community

ext-comm-rt-aa4nn2

RT extcommunity in aa4:nn or ip:nn format

ext-comm-rt-aa2nn4

RT extcommunity in aa:nn format

Command Mode

  • /exec/configure/evpn/evi-sr

route-target both auto

{ route-target both { auto | <ext-comm-rt-aa2nn4> | <ext-comm-rt-aa4nn2> } [ evpn | mvpn ] } | { no route-target both [ auto [ evpn | mvpn ] | <ext-comm-rt-aa2nn4> [ evpn | mvpn ] | <ext-comm-rt-aa4nn2> [ evpn | mvpn ] ] }

Syntax Description

no

Negate a command or set its defaults

route-target

Specify Target VPN Extended Communities

both

Export And Import Target-VPN community

auto

Generate route target automatically

evpn

(Optional) Specify Target for EVPN routes

mvpn

(Optional) Specify Target for MVPN routes

ext-comm-rt-aa4nn2

RT extcommunity in aa4:nn or ip:nn format

ext-comm-rt-aa2nn4

RT extcommunity in aa:nn format

Command Mode

  • /exec/configure/vrf-af-ipv4 /exec/configure/vrf-af-ipv6

route-target both auto

{ route-target both { auto | <ext-comm-rt-aa2nn4> | <ext-comm-rt-aa4nn2> } } | { no route-target both { auto | <ext-comm-rt-aa2nn4> | <ext-comm-rt-aa4nn2> } }

Syntax Description

no

Negate a command or set its defaults

route-target

Specify Target VPN Extended Communities

auto

Generate RT automatically

both

Export and Import Target-VPN community

ext-comm-rt-aa4nn2

RT extcommunity in aa4:nn or ip:nn format

ext-comm-rt-aa2nn4

RT extcommunity in aa:nn format

Command Mode

  • /exec/configure/evpn/evi

route-target export

{ route-target export { <ext-comm-rt-aa2nn4> | <ext-comm-rt-aa4nn2> } } | { no route-target export { <ext-comm-rt-aa2nn4> | <ext-comm-rt-aa4nn2> } }

Syntax Description

no

Negate a command or set its defaults

route-target

Specify Target VPN Extended Communities

export

Export Target-VPN community

ext-comm-rt-aa4nn2

RT extcommunity in aa4:nn or ip:nn format

ext-comm-rt-aa2nn4

RT extcommunity in aa:nn format

Command Mode

  • /exec/configure/evpn/evi-sr

route-target export

{ route-target export { <ext-comm-rt-aa2nn4> | <ext-comm-rt-aa4nn2> } [ evpn | mvpn ] } | { no route-target export { <ext-comm-rt-aa2nn4> | <ext-comm-rt-aa4nn2> } [ evpn | mvpn ] }

Syntax Description

no

Negate a command or set its defaults

route-target

Specify Target VPN Extended Communities

export

Export Target-VPN community

evpn

(Optional) Specify Target for EVPN routes

mvpn

(Optional) Specify Target for MVPN routes

ext-comm-rt-aa4nn2

RT extcommunity in aa4:nn or ip:nn format

ext-comm-rt-aa2nn4

RT extcommunity in aa:nn format

Command Mode

  • /exec/configure/vrf-af-ipv4 /exec/configure/vrf-af-ipv6

route-target export auto

{ route-target export { auto | <ext-comm-rt-aa2nn4> | <ext-comm-rt-aa4nn2> } } | { no route-target export { auto | <ext-comm-rt-aa2nn4> | <ext-comm-rt-aa4nn2> } }

Syntax Description

no

Negate a command or set its defaults

route-target

Specify Target VPN Extended Communities

auto

Generate RT automatically

export

Export Target-VPN community

ext-comm-rt-aa4nn2

RT extcommunity in aa4:nn or ip:nn format

ext-comm-rt-aa2nn4

RT extcommunity in aa:nn format

Command Mode

  • /exec/configure/evpn/evi

route-target import

{ route-target import { <ext-comm-rt-aa2nn4> | <ext-comm-rt-aa4nn2> } } | { no route-target import { <ext-comm-rt-aa2nn4> | <ext-comm-rt-aa4nn2> } }

Syntax Description

no

Negate a command or set its defaults

route-target

Specify Target VPN Extended Communities

import

Import Target-VPN community

ext-comm-rt-aa4nn2

RT extcommunity in aa4:nn or ip:nn format

ext-comm-rt-aa2nn4

RT extcommunity in aa:nn format

Command Mode

  • /exec/configure/evpn/evi-sr

route-target import

{ route-target import { <ext-comm-rt-aa2nn4> | <ext-comm-rt-aa4nn2> } [ evpn | mvpn ] } | { no route-target import { <ext-comm-rt-aa2nn4> | <ext-comm-rt-aa4nn2> } [ evpn | mvpn ] }

Syntax Description

no

Negate a command or set its defaults

route-target

Specify Target VPN Extended Communities

import

Import Target-VPN community

evpn

(Optional) Specify Target for EVPN routes

mvpn

(Optional) Specify Target for MVPN routes

ext-comm-rt-aa4nn2

RT extcommunity in aa4:nn or ip:nn format

ext-comm-rt-aa2nn4

RT extcommunity in aa:nn format

Command Mode

  • /exec/configure/vrf-af-ipv4 /exec/configure/vrf-af-ipv6

route-target import auto

{ route-target import { auto | <ext-comm-rt-aa2nn4> | <ext-comm-rt-aa4nn2> } } | { no route-target import { auto | <ext-comm-rt-aa2nn4> | <ext-comm-rt-aa4nn2> } }

Syntax Description

no

Negate a command or set its defaults

route-target

Specify Target VPN Extended Communities

import

Import Target-VPN community

auto

Generate RT automatically

ext-comm-rt-aa4nn2

RT extcommunity in aa4:nn or ip:nn format

ext-comm-rt-aa2nn4

RT extcommunity in aa:nn format

Command Mode

  • /exec/configure/evpn/evi

router-guard ip multicast

[no] router-guard ip multicast [ vlan <vlan_id> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

router-guard

Configures router guard for all interfaces

ip

Configure IP features

multicast

router-guard for multicast packet processing

vlan

(Optional) Configures router guard for specified vlan only(only in trunk ports)

vlan_id

(Optional) Specify vlan-id

Command Mode

  • /exec/configure/if-switching

router-guard ip multicast switchports

[no] router-guard ip multicast switchports

Syntax Description

no

(Optional) Negate a command or set its defaults

router-guard

Configures router guard for all interfaces

ip

Configure IP features

multicast

router-guard for multicast packet processing

switchports

configures on all switchports globally

Command Mode

  • /exec/configure

router-id

{ { router-id <id> } | { no router-id [ <id> ] } }

Syntax Description

no

Negate a command or set its defaults

router-id

Set OSPFv3 process router-id

id

Router ID Value

Command Mode

  • /exec/configure/router-ospf3 /exec/configure/router-ospf3/vrf

router-id

[no] router-id { <interface> | <rid> }

Syntax Description

no

(Optional) Negate a command or set its defaults

router-id

Router-ID

interface

Interface to provide IP address for router-id

rid

IP address to become router-id

Command Mode

  • /exec/configure/router-isis/router-isis-af-ipv4

router-id

{ { [ eigrp ] router-id <id> } | { no [ eigrp ] router-id [ <id> ] } }

Syntax Description

no

Negate a command or set its defaults

eigrp

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

router-id

router-id for this EIGRP process

id

EIGRP Router-ID in IP address format

Command Mode

  • /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

router-id

{ { router-id <id> } | { no router-id [ <id> ] } }

Syntax Description

no

Negate a command or set its defaults

router-id

Set OSPF process router-id

id

Router ID Value

Command Mode

  • /exec/configure/router-ospf /exec/configure/router-ospf/vrf

router-id

router-id [ vrf { <vrf-name> | <vrf-known-name> } ] <interface> [ force ] | no router-id [ { vrf { <vrf-name> | <vrf-known-name> } | <interface> [ force ] } ]

Syntax Description

no

Negate a command or set its defaults

router-id

Select interface to prefer for LDP identifier address

vrf

(Optional) VRF Routing/Forwarding instance information

vrf-name

(Optional) VPN Routing/Forwarding instance name

vrf-known-name

(Optional) Known VRF name

interface

force

(Optional) Forcibly change the LDP router id

Command Mode

  • /exec/configure/ldp

router-id

[no] router-id <router-id>

Syntax Description

no

(Optional) Negate a command or set its defaults

router-id

Specify the IP address to use as router-id

router-id

Manually configured router identifier

Command Mode

  • /exec/configure/router-bgp/vrf-cmds

router-preference maximum

[no] router-preference maximum <prefopts>

Syntax Description

no

(Optional) Negate a command or set its defaults

prefopts

Command Mode

  • /exec/configure/config-ra-guard

router bgp

[no] router bgp <as>

Syntax Description

no

(Optional) Negate a command or set its defaults

router

Enable a routing process

bgp

Border Gateway Protocol (BGP)

as

Autonomous

Command Mode

  • /exec/configure

router eigrp

[no] router eigrp <eigrp-ptag>

Syntax Description

no

(Optional) Negate a command or set its defaults

router

Enable a routing process

eigrp

Enhanced Interior Gateway Routing Protocol (EIGRP)

eigrp-ptag

Process tag

Command Mode

  • /exec/configure

router isis

[no] router isis <tag>

Syntax Description

no

(Optional) Negate a command or set its defaults

router

Enable a routing process

isis

Intermediate System to Intermediate System (IS-IS)

tag

Routing process tag

Command Mode

  • /exec/configure

router ospf

[no] router ospf <tag>

Syntax Description

no

(Optional) Negate a command or set its defaults

router

Enable a routing process

ospf

Open Shortest Path First (OSPF)

tag

Process tag

Command Mode

  • /exec/configure

router ospfv3

[no] router ospfv3 <tag>

Syntax Description

no

(Optional) Negate a command or set its defaults

router

Enable a routing process

ospfv3

Open Shortest Path First (OSPF) (Version 3)

tag

Process tag

Command Mode

  • /exec/configure

router rip

[no] router rip <tag>

Syntax Description

no

(Optional) Negate a command or set its defaults

router

Enable a routing process

rip

Routing Information Protocol (RIP)

tag

Process ID

Command Mode

  • /exec/configure

routing-context vrf

routing-context vrf <vrf-known-name>

Syntax Description

routing-context

Set the routing context

vrf

The new routing-context VRF

vrf-known-name

Known VRF name

Command Mode

  • /exec

rsakeypair

[no] rsakeypair <s0> [ <i0> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

rsakeypair

Configure trustpoint rsa key-pair details

s0

key-pair label

i0

(Optional) key-pair size

Command Mode

  • /exec/configure/trustpoint

rtr etr eid

[no] { rtr | etr | eid } { <locator> | <locator6> } [ strict | probe ] + <seq>

Syntax Description

no

(Optional) Negate a command or set its defaults

rtr

Configure RTR in ELP ordered list

etr

Configure ETR in ELP ordered list

eid

Configure EID in ELP ordered list

locator

IPv4 locator for RTR/ETR or EID

strict

(Optional) ELP hop must be used in Explicit Locator Path

probe

(Optional) RLOC-probe next-hop in ELP

seq

Sequence to insert or delete RTR/ETR/EID ELP entry

Command Mode

  • /exec/configure/lisp-elp /exec/configure/vrf/lisp-elp

rule

rule <number> { <action> } { { <permission> [ <featuretype> <name> ] } } | no rule <number>

Syntax Description

no

Negate a command or set its defaults

rule

Enter the rule number

number

Enter the rule number

action

Action

permission

Permission

featuretype

(Optional) Feature type

name

(Optional) Enter the access entity name

Command Mode

  • /exec/configure/role

rule command

rule <number> { <action> } { command <cmd_line> } | no rule <number>

Syntax Description

no

Negate a command or set its defaults

rule

Enter the rule number

number

Enter the rule number

action

Action

command

Command line

cmd_line

Enter the command (use space+' ' for command separator) e.g. config t role *

Command Mode

  • /exec/configure/role

rule oid

rule <number> <action> <permission> oid <snmp_oid> | no rule <number>

Syntax Description

no

Negate a command or set its defaults

rule

Enter the rule number

number

Enter the rule number

action

Action

permission

Permission

oid

SNMP oid (up to 32 elements)

snmp_oid

Enter snmp oid instance name

Command Mode

  • /exec/configure/role

run-script

run-script <uri0>

Syntax Description

run-script

Run shell scripts

uri0

Enter script file name

Command Mode

  • /exec

run2 guestshell

run2 guestshell [ { <cmd_args> } ]

Syntax Description

run2

execute/run program

guestshell

The guest shell Linux-bash

cmd_args

(Optional) The command to execute

Command Mode

  • /exec

run bash

run bash [ <cmd> ]

Syntax Description

run

execute/run program

bash

linux-bash

cmd

(Optional) the command to execute

Command Mode

  • /exec