Cisco Nexus 3548 NX-OS Command Reference (Show Commands), Release 9.3(1)

show param-list

show param-list [ param-list-name <plistname> ] [ show-instance ] [ __readonly__ TABLE_param_list <param_list_name> [ <param_list_var> ] [ <param_list_type> ] [ TABLE_instance <param_instance_name> [ <param_instance_var> ] [ <param_instance_val> ] ] ]

Syntax Description


show	Show running system information
param-list	Show param-list
param-list-name	(Optional) param list name
plistname	(Optional) Enter the name of the param-list
show-instance	(Optional) show instances for the param list
__readonly__	(Optional)
TABLE_param_list	(Optional)
param_list_name	(Optional) Parameter List Name
param_list_var	(Optional) Parameter Name
param_list_type	(Optional) Param Type
TABLE_instance	(Optional)
param_instance_name	(Optional) Instance Name
param_instance_var	(Optional) Instance Variable Name
param_instance_val	(Optional) Instance Variable Value

Command Mode

/exec

show password secure-mode

show password secure-mode [ __readonly__ { secure_mode <secure_mode_status> } ]

Syntax Description


show	Show running system information
password	Password for the user
secure-mode	secure mode for changing passwords
__readonly__	(Optional)
secure_mode	(Optional) run time status about xml
secure_mode_status	(Optional) Run time status about secure mode

Command Mode

/exec

show password strength-check

show password strength-check [ __readonly__ { operation_status <o_status> } ]

Syntax Description


show	Show running system information
password	Password for the user
strength-check	Strength check of password
__readonly__	(Optional)
operation_status	(Optional) run-time information about password strength-check
o_status	(Optional) operational status of password strength check

Command Mode

/exec

show plb

show plb [ service <service-name> ] [ brief ] [ __readonly__ <is_firstentry> <is_detail> <is_active> <is_firstentry_routemap> <is_firstentry_standby> <is_firstentry_acl> <is_lastentry> [ TABLE_summary <service_name> <state> [ <reason> ] <lb_scheme> [ <interface> ] <buckets> [ <vrf_name> ] [ <excl_acl> ] [ <src_interface> ] [ TABLE_device <device_grp> <dg_probe> <dg_probe_port> ] [ TABLE_route_map [ <route_map> ] <interface> <r_status> ] [ TABLE_vip [ <vip_ip> ] [ <vip_probe> ] [ <vip_port> ] [ <vip_dgname> ] [ <ace_name> ] [ <ace_seq> ] [ <ace_ip> ] [ <ace_protocol> ] [ <ace_port> ] [ TABLE_vip_node [ <vip_node> ] [ <vip_nodev6> ] <vip_config> <vip_weight> <vip_node_probe> <vip_node_probe_port> <vip_node_probe_ip> <vip_status> <vip_track_id> <vip_ip_sla_id> [ TABLE_vip_standby [ <vip_standby_ip> ] [ <vip_standby_ipv6> ] <vip_standby_config> <vip_standby_weight> <vip_standby_probe> <vip_standby_probe_port> <vip_standby_probe_ip> <vip_standby_status> <vip_standby_track_id> <vip_standby_sla_id> ] [ TABLE_vip_acl [ <vip_access_list> ] ] ] ] [ TABLE_node [ <node> ] [ <nodev6> ] <config> <weight> <node_probe> <node_probe_port> <node_probe_ip> <status> <track_id> <ip_sla_id> [ TABLE_standby [ <standby_ip> ] [ <standby_ipv6> ] <standby_config> <standby_weight> <standby_probe> <standby_probe_port> <standby_probe_ip> <standby_status> <standby_track_id> <standby_sla_id> ] [ TABLE_acl [ <access_list> ] ] ] ] ]

Syntax Description


show	Show running system information
plb	Display PLB service details
service	(Optional) PLB details for specific service
service-name	(Optional) Specify PLB service name
brief	(Optional) Display PLB service in brief
__readonly__	(Optional) Read Only
is_firstentry	(Optional)
is_detail	(Optional)
is_active	(Optional)
is_firstentry_routemap	(Optional)
is_firstentry_acl	(Optional)
is_lastentry	(Optional)
is_firstentry_standby	(Optional)
TABLE_summary	(Optional)
service_name	(Optional) PLB service name
lb_scheme	(Optional) lb scheme
interface	(Optional) interface
src_interface	(Optional) source interface for probe
state	(Optional) state
buckets	(Optional) buckets
reason	(Optional) inactive reason
vrf_name	(Optional) VRF-Name
excl_acl	(Optional) exclude access-list
TABLE_device	(Optional)
device_grp	(Optional) service device group
dg_probe	(Optional) probe type
dg_probe_port	(Optional) probe port
TABLE_route_map	(Optional)
route_map	(Optional) service route map
interface	(Optional) interface
r_status	(Optional) route map status
TABLE_vip	(Optional)
vip_ip	(Optional) vip ip
vip_probe	(Optional) vip protocol
vip_port	(Optional) vip port
vip_dgname	(Optional) vip device group
ace_name	(Optional) ace information
ace_seq	(Optional) ace information
ace_ip	(Optional) ace information
ace_protocol	(Optional) ace information
ace_port	(Optional) ace information
TABLE_vip_node	(Optional)
vip_node	(Optional) service node ip
vip_nodev6	(Optional) service node IPv6
vip_config	(Optional) node config
vip_weight	(Optional) node weight
vip_status	(Optional) node status
vip_node_probe	(Optional) node probe type
vip_node_probe_port	(Optional) node probe port
vip_node_probe_ip	(Optional) node probe ip
vip_track_id	(Optional) node track id
vip_ip_sla_id	(Optional) node ip sla id
TABLE_vip_standby	(Optional)
vip_standby_ip	(Optional) standby node ip
vip_standby_ipv6	(Optional) standby node ipv6
vip_standby_config	(Optional) standby node config
vip_standby_weight	(Optional) standby node weight
vip_standby_status	(Optional) standby node status
vip_standby_probe	(Optional) standby node probe type
vip_standby_probe_port	(Optional) standby node probe port
vip_standby_probe_ip	(Optional) standby node probe ip
vip_standby_track_id	(Optional) standby node track id
vip_standby_sla_id	(Optional) standby node sla id
TABLE_vip_acl	(Optional)
vip_access_list	(Optional) access list
TABLE_node	(Optional)
node	(Optional) service node ip
nodev6	(Optional) service node IPv6
config	(Optional) node config
weight	(Optional) node weight
status	(Optional) node status
node_probe	(Optional) node probe type
node_probe_port	(Optional) node probe port
node_probe_ip	(Optional) node probe ip
track_id	(Optional) node track id
ip_sla_id	(Optional) node ip sla id
TABLE_standby	(Optional)
standby_ip	(Optional) standby node ip
standby_ipv6	(Optional) standby node ipv6
standby_config	(Optional) standby node config
standby_weight	(Optional) standby node weight
standby_status	(Optional) standby node status
standby_probe	(Optional) standby node probe type
standby_probe_port	(Optional) standby node probe port
standby_probe_ip	(Optional) standby node probe ip
standby_track_id	(Optional) standby node track id
standby_sla_id	(Optional) standby node sla id
TABLE_acl	(Optional)
access_list	(Optional) access list

Command Mode

/exec

show plb analytics

show plb analytics [ service <service-name> ] [ src { <sip> | <sipv6> } | node { <nip> | <nipv6> } | vip { <vip> | <vipv6> } | device-group <group-name> ] [ brief ] [ __readonly__ <plbshowinfo-stats-svc-hdr> [ TABLE_stats_svc <plbshowinfo-stats-service_name> <plbshowinfo-stats-dev-grp> <plbshowinfo-stats-vip> <plbshowinfo-stats-vip-pkts> <plbshowinfo-stats-vip-pkts-percentage> [ <plbshowinfo-stats-ace-seq> ] [ <plbshowinfo-stats-ace-ip> ] <plbshowinfo-stats-bkt-hdr> [ TABLE_stats_bkt <plbshowinfo-stats-acl> [ <plbshowinfo-stats-oper-node> ] <plbshowinfo-stats-node-mode> <plbshowinfo-stats-orig-node> <plbshowinfo-stats-node-pkts> <plbshowinfo-stats-node-pkts-percentage> [ <plbshowinfo-stats-acl-pkts> ] [ <plbshowinfo-for-ace> ] ] ] <plb-show-end> [ <plb-true-end> ] ]

Syntax Description


show	Show running system information
plb	PLB service
analytics	PLB analytics information
service	(Optional) PLB analytics for specific service
service-name	(Optional) Specify plb service name
src	(Optional) Analytics information for source (bucket) ip
node	(Optional) Analytics information for destination device group node/server ip
vip	(Optional) Analytics information for virtual ip
device-group	(Optional) Analytics information of specified device group
group-name	(Optional) Specify device group name
sip	(Optional) Specify source ipv4 address
nip	(Optional) Specify destination ipv4 address
vip	(Optional) Specify virtual ipv4 address
brief	(Optional) Brief analytics information
__readonly__	(Optional) Read Only
plbshowinfo-stats-svc-hdr	(Optional) PLB analytics service header
TABLE_stats_svc	(Optional) plb stats service
plbshowinfo-stats-service_name	(Optional) PLB analytics service name
plbshowinfo-stats-dev-grp	(Optional) PLB analytics device group
plbshowinfo-stats-vip	(Optional) PLB analytics VIP IP
plbshowinfo-stats-vip-pkts	(Optional) PLB analytics virtual ip pkt_count
plbshowinfo-stats-vip-pkts-percentage	(Optional) PLB analytics virtual ip pkts percentage
plbshowinfo-stats-ace-seq	(Optional) PLB analytics ACE name and sequence number
plbshowinfo-stats-ace-ip	(Optional) PLB analytics ACE ip/mask/prefix
plbshowinfo-stats-bkt-hdr	(Optional) PLB analytics bucket header
TABLE_stats_bkt	(Optional) plb stats bucket
plbshowinfo-stats-acl	(Optional) PLB analytics bucket/acl name
plbshowinfo-stats-oper-node	(Optional) PLB analytics Operational node ip
plbshowinfo-stats-node-mode	(Optional) PLB analytics node mode
plbshowinfo-stats-orig-node	(Optional) PLB analytics Original node ip
plbshowinfo-stats-node-pkts	(Optional) PLB analytics node pkts count
plbshowinfo-stats-node-pkts-percentage	(Optional) PLB analytics node pkts percentage
plbshowinfo-stats-acl-pkts	(Optional) PLB analytics acl pkts
plbshowinfo-for-ace	(Optional) PLB analytics for ACE
plb-show-end	(Optional) Show plb end marker
plb-true-end	(Optional) show plb true end marker

Command Mode

/exec

show plb vrf

show plb vrf [ <vrf-name> ] [ __readonly__ <plbshowinfo-vrf-hdr> { TABLE_svc <plbshowinfo-vrf-service_name> <plbshowinfo-vrf-name> <plbshowinfo-vrf-id> } <plb-show-end> [ <plb-true-end> ] ]

Syntax Description


show	Show running system information
plb	PLB service
vrf	PLB service vrf
vrf-name	(Optional) VRF name
__readonly__	(Optional) Read Only
plbshowinfo-vrf-hdr	(Optional) PLB info vrf header
TABLE_svc	(Optional) PLB Service VRF details
plbshowinfo-vrf-service_name	(Optional) PLB service name
plbshowinfo-vrf-name	(Optional) PLB vrf name
plbshowinfo-vrf-id	(Optional) PLB vrf id
plb-show-end	(Optional) Show plb end marker
plb-true-end	(Optional) show plb true end marker

Command Mode

/exec

show pmap-int-br interface br

show pmap-int-br interface br [ __readonly__ { [ TABLE_ifvlanstr <if-vlan-str> <if-status> [ <in-pmap-qos> ] [ <out-pmap-qos> ] [ <in-pmap-que> ] [ <out-pmap-que> ] ] } ]

Syntax Description


show	Show running system information
pmap-int-br	Show policy maps
interface	Show service policy on interface
br	Brief report of all policies attached to interfaces
TABLE_ifvlanstr	(Optional) all interfaces xml sessions
if-vlan-str	(Optional) ifindex or vlan id: xml key
__readonly__	(Optional)
if-status	(Optional) Interface/vlan status [active/inactive]: xml key
in-pmap-qos	(Optional) Input QoS Policy-map name: xml key
out-pmap-qos	(Optional) output QoS Policy-map name: xml key
in-pmap-que	(Optional) Input Que Policy-map name: xml key
out-pmap-que	(Optional) Output Que Policy-map name: xml key

Command Mode

/exec

show pmap-int

show pmap-int { interface [ <iface-list> ] [ input | output ] [ type <qos-or-q> ] [ detail ] |

Syntax Description


show	Show running system information
pmap-int	Show policy maps
interface	Show service policy on interface
iface-list	(Optional) List of Interface
input	(Optional) Input Service policy
output	(Optional) Output Service policy
type	(Optional) Type of policy
qos-or-q	(Optional)
detail	(Optional) Detailed QoS or Queuing statistics

Command Mode

/exec

show pnp lease

Syntax Description


show	Show running system information
pnp	Plug and Play
lease	Show PnP lease information

Command Mode

/exec

show pnp posix_pi configs

Syntax Description


show	Show running system information
pnp	Plug and Play
posix_pi	Posix PnP PI agent
configs	Posix PnP PI configuration

Command Mode

/exec

show pnp posix_pi tech-support

Syntax Description


show	Show running system information
pnp	Plug and Play
posix_pi	Posix PnP PI agent
tech-support	Technical Support

Command Mode

/exec

show pnp profiles

Syntax Description


show	Show running system information
pnp	Plug and Play
profiles	Show POSIX PnP Profile

Command Mode

/exec

show pnp status

Syntax Description


show	Show running system information
pnp	Plug and Play
status	Show POSIX PnP Status

Command Mode

/exec

show pnp summary

Syntax Description


show	Show running system information
pnp	Plug and Play
summary	Show POSIX PnP Summary

Command Mode

/exec

show pnp version

Syntax Description


show	Show running system information
pnp	Plug and Play
version	Show POSIX PnP Version

Command Mode

/exec

show policy-map

show policy-map [ { [ type qos ] [ <pmap-name-qos> ] } | { type queuing [ <pmap-name-que> ] } ] [ __readonly__ { [ <display-all> ] [ TABLE_pmap [ <pmap-key> ] [ <type-spec> ] [ <yqos-or-q> ] [ <options> ] <pmap-name-out> [ <nq-xpmap-name> ] [ <desc> ] [ <nq-desc> ] [ TABLE_cmap [ <cmap-key> ] [ <type-cmap-spec> ] [ <xqos-or-q> ] [ <cmap-name> ] [ <nq-xcmap-name> ] [ TABLE_action [ <action-key> ] [ <nq-action-key> ] [ <serv-pol-type> ] [ <serv-pol-name> ] [ <cos-list> ] [ <qos-group-list> ] [ <protocol> ] [ <nq-pause> <timeout> <nq-size-in-bytes> <nq-xoff-bytes> <nq-xon-bytes> ] [ <pfc-cos-list> ] [ <pfc_rx_only> ] [ <cc> ] [ <thresh-units> ] [ <min-thresh> ] [ <max-thresh> ] [ <drop-prob> ] [ <iod> ] [ <mtu> ] [ <set-cos> ] [ <dpp> ] [ <dctcp-threshold> ] [ <queue-limit> ] [ <inner> ] [ <dlb-disable> ] [ <cos> ] [ <exp-val-imposition> ] [ <exp-val-topmost> ] [ <dscp-enum> ] [ <dscp> ] [ <prec-enum> ] [ <prec> ] [ <disc-class> ] [ <qos-group> ] [ <tmap-from> ] [ <tmap-to> ] [ <tmap-name> ] [ <avg-rate-type> ] [ <rate-units> ] [ <shape-rate> ] [ <min-rate-type> ] [ <min-rate-units> ] [ <shape-min-rate> ] [ <max-rate-type> ] [ <max-rate-units> ] [ <shape-max-rate> ] [ <rise-threshold-units> ] [ <fall-threshold-units> ] [ <prio-level> ] [ <qlim-param-type> ] [ <qlim-param-val> ] [ <ooo> ] [ <size-units> ] [ <qlim-size> ] [ <qlim-enum-spec> ] [ <rdet-agg> ] [ <rdet-mode> ] [ <rdet-burst-opt> ] [ <rdet-mesh-opt> ] [ <rdet-ecn> ] [ TABLE_rdet <rdet-key> [ <rdet-values> ] [ <rdet-min-thresh> ] [ <rdet-size-units> ] [ <rdet-max-thresh> ] [ <rdet-drop-prob> ] [ <rdet-weight> ] [ <rdet-cap-average> ] ] [ <rdet-nonecn-mode> ] [ TABLE_rdet_nonecn <rdet-nonecn-key> [ <rdet-nonecn-min-thresh> ] [ <rdet-nonecn-size-units> ] [ <rdet-nonecn-max-thresh> ] [ <rdet-nonecn-drop-prob> ] ] [ <afd-mode> ] [ TABLE_afd <afd-key> [ <afd-values> ] [ <afd-queue-desired> ] [ <afd-size-units> ] [ <afd-ecn> ] ] [ <pause> <size-in-bytes> <xoff-bytes> <xon-bytes> ] [ <priority-group-number> ] [ <bw-units> ] [ <bw-rate> ] [ <rem-bw-units> ] [ <rem-bw-rate> ] [ <agg-policer-name> ] [ <cir-spec> ] [ <bc-spec> ] [ <be-spec> ] [ <cir-rate-units> ] [ <cir> ] [ <bc-size-units> ] [ <bc> ] [ <pir-rate-units> ] [ <pir> ] [ <be-size-units> ] [ <be> ] [ <cnf-col-cmap> ] [ <exc-col-cmap> ] [ TABLE_police <police-key> [ <cnf-act> ] [ <exc-act> ] [ <vio-act> ] [ <set-type> ] [ <enum-spec> ] [ <set-val> ] [ <ptmap-from> ] [ <ptmap-to> ] [ <ptmap-name> ] ] [ <burst-detect-enable> ] ] ] ] } ]

Syntax Description


show	Show running system information
policy-map	Show policy maps
type	(Optional) Type of the policy-map
qos	(Optional) type qos
queuing	(Optional) type queuing
pmap-name-qos	(Optional) policy map name (type qos)
pmap-name-que	(Optional) policy map name (type queuing)
__readonly__	(Optional)
display-all	(Optional) Display all kinds of class-maps
TABLE_pmap	(Optional) all pmap xml sessions
pmap-key	(Optional) Policy-map name: xml key
TABLE_rdet	(Optional) all WRED sessions
TABLE_rdet_nonecn	(Optional) all WRED non ECN sessions
TABLE_afd	(Optional) all AFD sessions
TABLE_police	(Optional) all police actions
police-key	(Optional) police actions count: xml key
TABLE_cmap	(Optional) all cmap xml sessions
cmap-key	(Optional) Class-map name: xml key
TABLE_action	(Optional) all actions
action-key	(Optional) Actions count: xml key
nq-action-key	(Optional) Actions xcount: xml key
yqos-or-q	(Optional)
options	(Optional) match-first option
pmap-name-out	(Optional) Policy-map name
desc	(Optional) Description string
nq-desc	(Optional) Description xstring
cmap-name	(Optional) Class-map name
nq-xpmap-name	(Optional) Policy-map xname
nq-xcmap-name	(Optional) Class-map xname
cos-list	(Optional) List of class-of-service values
qos-group-list	(Optional) List of qos-group values
protocol	(Optional) protocol
timeout	(Optional) timeout value
pfc-cos-list	(Optional) List of class-of-service values
cc	(Optional) congestion control protocol
thresh-units	(Optional) Units of threshold - pkts/bytes/kbytes/mbytes/ms/us/perc
drop-prob	(Optional) Drop Probability at Maximum Threshold value
iod	(Optional) IOD value
mtu	(Optional) MTU value
set-cos	(Optional) Set CoS value
dpp	(Optional) Dynamic Packet Prioritization Class
dctcp-threshold	(Optional) DCTCP threshold in bytes
queue-limit	(Optional) Queue size for the class
pfc_rx_only	(Optional) Pause receive only mode is enabled
xqos-or-q	(Optional)
serv-pol-type	(Optional) Type of service policy referred to
serv-pol-name	(Optional) Name of policy-map referred to within this policy-map
type-spec	(Optional) Type of policy-map specified or not
type-cmap-spec	(Optional) Type of class-map specified or not
inner	(Optional) Specifies if tunnel or inner keywords are mentioned
dlb-disable	(Optional) Disable Dynamic Load Balancing
cos	(Optional) IEEE 802.1Q Class of Service value
exp-val-imposition	(Optional) MPLS EXP value of type imposition
exp-val-topmost	(Optional) MPLS EXP calue of type topmost
dscp	(Optional) DSCP in IP(v4) and IPv6 packets
dscp-enum	(Optional)
prec	(Optional) Precedence in IP(v4) and IPv6 packets
prec-enum	(Optional)
disc-class	(Optional) Discard class
qos-group	(Optional) Qos-group
tmap-from	(Optional)
tmap-to	(Optional)
tmap-name	(Optional) Table map name
ptmap-from	(Optional)
ptmap-to	(Optional)
ptmap-name	(Optional) Table map name
avg-rate-type	(Optional) Specifies if average shape rate is specified
rate-units	(Optional) Units of rate - bps, kbps, mbps, gbps, ms, us
min-rate-type	(Optional) Specifies if minimum shape rate is specified
min-rate-units	(Optional) Units of rate - bps, kbps, mbps, gbps, ms, us
max-rate-type	(Optional) Specifies if maximum shape rate is specified
max-rate-units	(Optional) Units of rate - bps, kbps, mbps, gbps, ms, us
cir-rate-units	(Optional) Units of rate - bps, kbps, mbps, gbps, ms, us, pps
pir-rate-units	(Optional) Units of rate - bps, kbps, mbps, gbps, ms, us, pps
prio-level	(Optional) Priority if specified
qlim-param-type	(Optional) Type of parameter for qlim - cos/prec/dscp/disc class/qosgrp
qlim-param-val	(Optional) Parameter value for qlimit
qlim-size	(Optional) Queue size for qlimit
size-units	(Optional) Units of queue size - pkts/bytes/kbytes/mbytes/ms/us/perc
rdet-size-units	(Optional) Units of queue size - pkts/bytes/kbytes/mbytes/ms/us/perc
rdet-nonecn-size-units	(Optional) Units of queue size - pkts/bytes/kbytes/mbytes/ms/us/perc
afd-size-units	(Optional) Units of queue size - bytes/kbytes/mbytes
bc-size-units	(Optional) Units of queue size - pkts/bytes/kbytes/mbytes/ms/us/perc
be-size-units	(Optional) Units of queue size - pkts/bytes/kbytes/mbytes/ms/us/perc
qlim-enum-spec	(Optional) Weather qlimit parameter is specified in enum or not
rdet-mode	(Optional) Random-detect mode
rdet-nonecn-mode	(Optional) Random-detect non-ecn mode
rdet-agg	(Optional) Are the params for aggregate flow
rdet-values	(Optional) List of class-of-service values for random-detect
rdet-drop-prob	(Optional) Random-detect drop probability
rdet-weight	(Optional) Random-detect queue length weight
rdet-cap-average	(Optional) Random-detect cap-average
rdet-ecn	(Optional) Random-detect ECN
rdet-burst-opt	(Optional) Random-detect burst optimized
rdet-mesh-opt	(Optional) Random-detect mesh optimized
rdet-nonecn-drop-prob	(Optional) Random-detect non-ecn drop probability
afd-mode	(Optional) AFD mode
afd-values	(Optional) List of class-of-service values for AFD
afd-ecn	(Optional) AFD ECN
pause	(Optional) Pause value
nq-pause	(Optional) NQ Pause value
priority-group-number	(Optional) Priority group value
bw-units	(Optional) Bandwidth units
rem-bw-units	(Optional) Remaining bandwidth units
rem-bw-rate	(Optional) Remaining bandwidth rate
agg-policer-name	(Optional) Aggregate policer name
cir-spec	(Optional) Is CIR keyword specified
bc-spec	(Optional) Is Committed Burst keyword specified
be-spec	(Optional) Is Extended Burst keyword specified
cnf-col-cmap	(Optional) Conforming color class-map name
exc-col-cmap	(Optional) Exceeding color class-map name
enum-spec	(Optional) Is DSCP or PREC enum value specified
cnf-act	(Optional) Conform action (Police)
exc-act	(Optional) Exceed action (Police)
vio-act	(Optional) Violate action (Police)
set-type	(Optional) Type of set in police action
set-val	(Optional) Value of set type in police action
ooo	(Optional) Out-of-Order
burst-detect-enable	(Optional) Burst detect feature is enabled

Command Mode

/exec

show policy-map interface control-plane

show policy-map interface control-plane { [ module <slot-no-in> [ class <cmap-name> ] ] | [ class <cmap-name> [ module <slot-no-in> ] ] } [ __readonly__ [ <scale-factor-cmd> ] <pmap-name> [ TABLE_cmap <cmap-key> <cmap-name-out> <opt_any_or_all> [ TABLE_match <match-key> { [ access_grp <acc_grp_name> ] [ redirect <opt_match_redirect> ] [ exception <opt_match_excpt> ] [ protocol <opt_match_protocol> ] } + ] [ <class-off-rate> <class-drop-rate> <class-pkts> <class-bytes> ] [ [ <set_vld_flg> ] { { cos [ inner ] <cos-val> } | { dscp [ tunnel ] <dscp-val> } | { precedence [ tunnel1 ] <prec-val> } } ] [ <threshold> <level> ] [ [ <policer_show_flags> ] [ <cir> <opt_kbps_mbps_gbps_pps_cir> ] [ { percent <cir-perc> } ] [ <bc> <opt_kbytes_mbytes_gbytes_bc> ] [ <pir> <opt_kbps_mbps_gbps_pps_pir> ] [ { percent1 <pir-perc> } ] [ <be> <opt_kbytes_mbytes_gbytes_be> ] ] [ TABLE_slot { <slot-no-out> { [ [ <conform-pkts> ] | [ <conform-bytes> ] ] [ { <opt_drop_transmit_conform> } | { set-cos-transmit <set-cos-val> } | { set-dscp-transmit <set-dscp-val> } | { set-prec-transmit <set-prec-val> } ] [ { [ [ <exceed-pkts> ] <exceed-bytes> ] { { <opt_drop_transmit_exceed> } | { set dscp1 dscp2 table cir-markdown-map } } } ] { [ <violate-pkts> | <violate-bytes> ] { { <opt_drop_transmit_violate> } | { set1 dscp3 dscp4 table1 pir-markdown-map } } } } } ] ] ]

Syntax Description


show	Show running system information
policy-map	Show policy maps
interface	Show service policy on interface
control-plane	command is for copp policy
module	(Optional) module number for statistics
class	(Optional) class-name name
cmap-name	(Optional) Name of the class-map
pmap-name	(Optional) Name of the Policy-map
__readonly__	(Optional)
scale-factor-cmd	(Optional) Scale factor command
TABLE_cmap	(Optional) all cmap xml sessions
cmap-key	(Optional) Class-map key : XML output
cmap-name-out	(Optional) Name of the output class-map
opt_any_or_all	(Optional) Enter match-any or match-all
TABLE_match	(Optional) all match xml sessions
match-key	(Optional) Match key : XML output
access_grp	(Optional)
acc_grp_name	(Optional)
redirect	(Optional)
opt_match_redirect	(Optional) Match criteria for redirected packets
exception	(Optional)
opt_match_excpt	(Optional) Match criteria for exception packets
protocol	(Optional)
opt_match_protocol	(Optional) Match criteria for protocol packets
set_vld_flg	(Optional) Set valid flag
cos	(Optional)
inner	(Optional)
cos-val	(Optional) Set cos val
dscp	(Optional)
tunnel	(Optional)
dscp-val	(Optional) Set dscp val
precedence	(Optional)
tunnel1	(Optional)
prec-val	(Optional) Set prec val
policer_show_flags	(Optional) Policer show flags
level	(Optional) syslog severity level
opt_kbps_mbps_gbps_pps_cir	(Optional) Units
percent	(Optional)
opt_kbps_mbps_gbps_pps_pir	(Optional) Units
percent1	(Optional)
opt_kbytes_mbytes_gbytes_bc	(Optional) Units
opt_kbytes_mbytes_gbytes_be	(Optional) Units
TABLE_slot	(Optional) all slot-num : XML output
slot-no-in	(Optional) input slot no
slot-no-out	(Optional) output slot no
opt_drop_transmit_conform	(Optional) Set the action
set-cos-transmit	(Optional)
set-cos-val	(Optional) Conform action cos val
set-dscp-transmit	(Optional)
set-dscp-val	(Optional) Conform action dscp val
set-prec-transmit	(Optional)
set-prec-val	(Optional) Conform action prec val
opt_drop_transmit_exceed	(Optional) Set the action
set	(Optional)
dscp1	(Optional)
dscp2	(Optional)
table	(Optional)
cir-markdown-map	(Optional)
opt_drop_transmit_violate	(Optional) Set the action
set1	(Optional)
dscp3	(Optional)
dscp4	(Optional)
table1	(Optional)
pir-markdown-map	(Optional)

Command Mode

/exec

show policy-map system

show policy-map system [ type { network-qos | qos [ input2 ] | queuing [ input | output ] } ] [ __readonly__ { [ <display-all> ] [ TABLE_xpmap <xpmap-name> [ <desc> ] [ TABLE_xcmap <xcmap-name> [ TABLE_xaction <xaction-key> [ <cos-list> ] [ <qos-group-list> ] [ <protocol> ] [ <pause> <timeout> <size-in-bytes> <xoff-bytes> <xon-bytes> ] [ <pfc-cos-list> ] [ <pfc_rx_only> ] [ <cc> ] [ <thresh-units> ] [ <min-thresh> ] [ <max-thresh> ] [ <drop-prob> ] [ <iod> ] [ <mtu> ] [ <set-cos> ] [ <dpp> ] [ <dctcp-threshold> ] [ <queue-limit> ] [ <stat-en-dis-enum> ] ] ] ] [ TABLE_pmap <pmap-key> <pmap-inner-outer> <in-or-out> <yqos-or-q> [ <options> ] <pmap-name> [ <stat-status-enum> ] [ TABLE_cmap <cmap-key> [ <xqos-or-q> ] <match-opts> <cmap-name> [ <slot-num> ] [ <class-pkts> ] [ <agg-forward> ] [ TABLE_match <match-key> [ <not> ] [ <inner> ] [ <cos-list> ] [ <dscp-list> ] [ <exp-value-top> ] [ <protocol-name> ] [ <match-cmap-xqos-or-q> ] [ <match-cmap-opts> ] [ <match-cmap-name> ] ] [ TABLE_action <action-key> [ <set-inner> ] [ <cos> ] [ <qos-group> ] [ <serv-pol-type> ] [ <serv-pol-name> ] [ <serv-pol-return-inout> ] [ <rate-units> ] [ <shape-rate> ] [ <min-rate-type> ] [ <min-rate-units> ] [ <shape-min-rate> ] [ <max-rate-type> ] [ <max-rate-units> ] [ <shape-max-rate> ] [ <prio-level> ] [ <qlim-param-type> ] [ <qlim-param-val> ] [ <size-units> ] [ <qlim-size> ] [ <qlim-enum-spec> ] [ <bw-units> ] [ <bw-rate> ] [ <rem-bw-units> ] [ <rem-bw-rate> ] [ <rise-threshold-units> ] [ <fall-threshold-units> ] [ <rdet-agg> ] [ <rdet-mode> ] [ <rdet-burst-opt> ] [ <rdet-mesh-opt> ] [ TABLE_rdet <rdet-key> [ <rdet-values> ] [ <rdet-min-thresh> ] [ <rdet-size-units> ] [ <rdet-max-thresh> ] [ <rdet-drop-prob> ] [ <rdet-weight> ] [ <rdet-cap-average> ] ] [ <rdet-ecn> ] [ TABLE_afd <afd-key> [ <afd-values> ] [ <afd-queue-desired> ] [ <afd-size-units> ] [ <afd-ecn> ] ] [ <pause> <size-in-bytes> <xoff-bytes> <xon-bytes> ] ] ] ] } ]

Syntax Description


show	Show running system information
policy-map	Show policy maps
type	(Optional) Type of the policy-map
system	Active policy in the system
network-qos	(Optional) type network-qos
qos	(Optional) type qos
input2	(Optional) input policy
queuing	(Optional) type queuing
input	(Optional) input policy
output	(Optional) output policy
__readonly__	(Optional)
display-all	(Optional) Display all network-qos policy-maps
TABLE_xpmap	(Optional) all xpmap xml sessions
xpmap-name	(Optional) Policy-map name
TABLE_xcmap	(Optional) all xcmap xml sessions
xcmap-name	(Optional) Class-map name
TABLE_xaction	(Optional) all network-qos actions
xaction-key	(Optional) network-qos ctions count: xml key
TABLE_pmap	(Optional) all pmap xml sessions
pmap-key	(Optional) Policy-map name: xml key
TABLE_cmap	(Optional) all cmap xml sessions
cmap-key	(Optional) Class-map name: xml key
TABLE_action	(Optional) all actions
action-key	(Optional) Actions count: xml key
TABLE_match	(Optional) all match xml sessions
match-key	(Optional) match count: xml key
TABLE_rdet	(Optional) all WRED sessions
TABLE_afd	(Optional) all AFD sessions
stat-en-dis-enum	(Optional)
in-or-out	(Optional)
yqos-or-q	(Optional)
stat-status-enum	(Optional)
desc	(Optional) Description string
thresh-units	(Optional) Units of threshold - pkts/bytes/kbytes/mbytes/ms/us/perc
drop-prob	(Optional) Drop Probability at Maximum Threshold value
pause	(Optional) Pause value
pfc-cos-list	(Optional) List of class-of-service values
pfc_rx_only	(Optional) Pause receive only mode enabled
timeout	(Optional) timeout value
cc	(Optional) congestion control protocol
iod	(Optional) IOD value
mtu	(Optional) MTU value
set-cos	(Optional) Set CoS value
dpp	(Optional) Dynamic Packet Prioritization Class
queue-limit	(Optional) Queue size for the class
protocol-name	(Optional) protocol name
protocol	(Optional) protocol
dctcp-threshold	(Optional) DCTCP threshold in bytes
cos-list	(Optional) List of class-of-service values
dscp-list	(Optional) List of DSCP values
exp-value-top	(Optional) List of MPLS exp values
qos-group	(Optional) QoS Group Value
qos-group-list	(Optional) List of qos-group values
options	(Optional) match-first option
pmap-name	(Optional) Policy-map name
pmap-inner-outer	(Optional) Inner or Outer policy-map
serv-pol-return-inout	(Optional) Inner or Outer policy-map
cmap-name	(Optional) Class-map name
xqos-or-q	(Optional)
match-opts	(Optional) Type of match in class-map
match-cmap-xqos-or-q	(Optional)
match-cmap-opts	(Optional) Type of match in class-map
not	(Optional) Negate this match result
inner	(Optional) Specifies if tunnel or inner keywords are mentioned
cos-list	(Optional) List of class-of-service values
match-cmap-name	(Optional) class-map name
serv-pol-type	(Optional) Type of service policy referred to
serv-pol-name	(Optional) Name of policy-map referred to within this policy-map
set-inner	(Optional) Specifies if tunnel or inner keywords are mentioned
cos	(Optional) IEEE 802.1Q Class of Service value
rate-units	(Optional) Units of rate - bps, kbps, mbps, gbps, ms, us
min-rate-type	(Optional) Specifies if minimum shape rate is specified
min-rate-units	(Optional) Units of rate - bps, kbps, mbps, gbps, ms, us
max-rate-type	(Optional) Specifies if maximum shape rate is specified
max-rate-units	(Optional) Units of rate - bps, kbps, mbps, gbps, ms, us
prio-level	(Optional) Priority if specified
qlim-param-type	(Optional) Type of parameter for qlim - cos/prec/dscp/disc class/qosgrp
qlim-param-val	(Optional) Parameter value for qlimit
qlim-size	(Optional) Queue size for qlimit
size-units	(Optional) Units of queue size - pkts/bytes/kbytes/mbytes/ms/us/perc
qlim-enum-spec	(Optional) Weather qlimit parameter is specified in enum or not
rdet-size-units	(Optional) Units of queue size - pkts/bytes/kbytes/mbytes/ms/us/perc
afd-size-units	(Optional) Units of queue size - bytes/kbytes/mbytes
bw-units	(Optional) Bandwidth units
rem-bw-units	(Optional) Remaining bandwidth units
rem-bw-rate	(Optional) Remaining bandwidth rate
rdet-values	(Optional) List of class-of-service values for random-detect
rdet-agg	(Optional) Are the params for aggregate flow
rdet-mode	(Optional) Random-detect mode
rdet-drop-prob	(Optional) Random-detect drop probability
rdet-weight	(Optional) Random-detect queue length weight
rdet-cap-average	(Optional) Random-detect cap-average
rdet-ecn	(Optional) Random-detect ECN
rdet-burst-opt	(Optional) Random-detect burst optimized
rdet-mesh-opt	(Optional) Random-detect mesh optimized
afd-values	(Optional) List of class-of-service values for afd
afd-ecn	(Optional) AFD ECN
pause	(Optional) Pause value
slot-num	(Optional) the slot number
agg-forward	(Optional) prints out aggregate forward

Command Mode

/exec

show policy-map type control-plane

show policy-map type control-plane [ expand ] [ { name <pmap-name> } ] [ __readonly__ [ { TABLE_pmap <pmap-name1> [ { TABLE_cmap <cmap-name> [ <opt_any_or_all> ] [ TABLE_match [ <match_key> ] { [ access_grp <acc_grp_name> + ] [ redirect <opt_match_redirect> ] [ exception <opt_match_excpt> + ] [ protocol <opt_match_protocol> ] } ] [ { TABLE_set_action <set_vld_flg> { { cos [ inner ] <cos-val> } | { dscp [ tunnel ] <dscp-val> } | { precedence [ tunnel1 ] <prec-val> } } } ] [ <threshold> <level> ] [ [ <policer_show_flags> ] [ <cir> <opt_kbps_mbps_gbps_pps_cir> ] [ percent <cir-perc> ] [ <pir> <opt_kbps_mbps_gbps_pps_pir> ] [ percent1 <pir-perc> ] [ <bc> <opt_kbytes_mbytes_gbytes_bc> ] [ <be> <opt_kbytes_mbytes_gbytes_be> ] [ { <opt_drop_transmit_conform> } | { set-cos-transmit <set-cos-val> } | { set-dscp-transmit <set-dscp-val> } | { set-prec-transmit <set-prec-val> } ] [ { <opt_drop_transmit_exceed> } | { set dscp1 dscp2 table cir-markdown-map } ] [ { <opt_drop_transmit_violate> } | { set1 dscp3 dscp4 table1 pir-markdown-map } ] ] } ] } ] ]

Syntax Description


show	Show running system information
policy-map	Show policy maps
type	Type of the policy-map
control-plane	command is for copp policy
expand	(Optional) Display the match-criterias along with class-map
name	(Optional) policy-map name
pmap-name	(Optional) Name of the Policy-map
__readonly__	(Optional)
TABLE_pmap	(Optional) Table of policy-map
pmap-name1	(Optional) Name of the Policy-map
TABLE_cmap	(Optional) Table of class-map
cmap-name	(Optional) Name of the class-map
opt_any_or_all	(Optional) Enter match-any or match-all
TABLE_match	(Optional) Table of match statement
match_key	(Optional) Match key : XML output
access_grp	(Optional)
acc_grp_name	(Optional)
redirect	(Optional)
opt_match_redirect	(Optional) Match criteria for redirected packets
exception	(Optional)
opt_match_excpt	(Optional) Match criteria for exception packets
protocol	(Optional)
opt_match_protocol	(Optional) Match criteria for protocol packets
TABLE_set_action	(Optional) Table of set action
set_vld_flg	(Optional) Set valid flag
level	(Optional) syslog severity level
opt_kbps_mbps_gbps_pps_cir	(Optional) Units
percent	(Optional)
opt_kbps_mbps_gbps_pps_pir	(Optional) Units
percent1	(Optional)
opt_kbytes_mbytes_gbytes_bc	(Optional) Units
opt_kbytes_mbytes_gbytes_be	(Optional) Units
opt_drop_transmit_conform	(Optional) Set the action
set-cos-transmit	(Optional)
set-cos-val	(Optional) Conform action cos val
set-dscp-transmit	(Optional)
set-dscp-val	(Optional) Conform action dscp val
set-prec-transmit	(Optional)
set-prec-val	(Optional) Conform action prec val
opt_drop_transmit_exceed	(Optional) Set the action
set	(Optional)
dscp1	(Optional)
dscp2	(Optional)
table	(Optional)
cir-markdown-map	(Optional)
opt_drop_transmit_violate	(Optional) Set the action
set1	(Optional)
dscp3	(Optional)
dscp4	(Optional)
table1	(Optional)
pir-markdown-map	(Optional)
cos	(Optional)
inner	(Optional)
cos-val	(Optional) Set cos val
dscp	(Optional)
tunnel	(Optional)
dscp-val	(Optional) Set dscp val
precedence	(Optional)
tunnel1	(Optional)
prec-val	(Optional) Set prec val
policer_show_flags	(Optional) Policer show flags

Command Mode

/exec

show policy-map type network-qos

show policy-map type network-qos [ <pmap-name-nq> ] [ __readonly__ { [ <display-all> ] [ TABLE_xpmap <xpmap-name> [ <desc> ] [ TABLE_xcmap <xcmap-name> [ TABLE_action <action-key> [ <cos-list> ] [ <qos-group-list> ] [ <protocol> ] [ <pause> <timeout> <size-in-bytes> <xoff-bytes> <xon-bytes> ] [ <pfc-cos-list> ] [ <pfc_rx_only> ] [ <cc> ] [ <thresh-units> ] [ <min-thresh> ] [ <max-thresh> ] [ <drop-prob> ] [ <iod> ] [ <mtu> ] [ <set-cos> ] [ <dpp> ] [ <dctcp-threshold> ] [ <queue-limit> ] ] ] ] } ]

Syntax Description


show	Show running system information
policy-map	Show policy maps
type	Type of the policy-map
pmap-name-nq	(Optional) Policy-map name
network-qos	type network-qos
__readonly__	(Optional)
display-all	(Optional) Display all network-qos policy-maps
TABLE_xpmap	(Optional) all xpmap xml sessions
xpmap-name	(Optional) Policy-map name
TABLE_xcmap	(Optional) all xcmap xml sessions
xcmap-name	(Optional) Class-map name
TABLE_action	(Optional) all actions
action-key	(Optional) Actions count: xml key
desc	(Optional) Description string
cos-list	(Optional) List of class-of-service values
qos-group-list	(Optional) List of qos-group values
protocol	(Optional) protocol
pause	(Optional) Pause value
timeout	(Optional) timeout value
pfc-cos-list	(Optional) List of class-of-service values
cc	(Optional) congestion control protocol
thresh-units	(Optional) Units of threshold - pkts/bytes/kbytes/mbytes/ms/us/perc
drop-prob	(Optional) Drop Probability at Maximum Threshold value
iod	(Optional) IOD value
mtu	(Optional) MTU value
set-cos	(Optional) Set CoS value
dpp	(Optional) Dynamic Packet Prioritization Class
dctcp-threshold	(Optional) DCTCP threshold in bytes
queue-limit	(Optional) Queue size for the class
pfc_rx_only	(Optional) Pause receive only mode is enabled

Command Mode

/exec

show port-channel capacity

show port-channel capacity [ __readonly__ <total> <used> <free> <percentage_used> ]

Syntax Description


show	Show running system information
port-channel	Show port-channel information
capacity	Capacity information
__readonly__	(Optional)
total	(Optional) Total resource
used	(Optional) Used resource
free	(Optional) Free resource
percentage_used	(Optional) Used resource in percentage

Command Mode

/exec

show port-channel compatibility-parameters

show port-channel compatibility-parameters [ __readonly__ { TABLE_compatibility <parameter> <description> } + ]

Syntax Description


show	Show running system information
port-channel	Show port-channel information
compatibility-parameters	Show compatibility parameters
__readonly__	(Optional)
TABLE_compatibility	(Optional) Port-channel compatibility table
parameter	(Optional) Compatibity parameter
description	(Optional) Parameter description

Command Mode

/exec

show port-channel database

show port-channel database [ interface <if0> ] [ __readonly__ TABLE_interface <interface> <last-membership-update> <total-ports> <total-up-ports> [ <first_operational-port> ] <age-of-channel> [ <time-since-last-bundle> ] [ <last-bundled-member> ] [ <time-since-last-unbundle> ] [ <last-unbundled-member> ] [ { TABLE_member <port> <mode> <port-status> } ] [ <protocol> ] ]

Syntax Description


show	Show running system information
port-channel	Show port-channel information
database	Show port-channel database
interface	(Optional) Specify a port-channel
if0	(Optional)
__readonly__	(Optional)
TABLE_interface	(Optional) Port-channel table
interface	(Optional) Port channel
mode	(Optional) channel-group mode
last-membership-update	(Optional) Last membership update
total-ports	(Optional) Total number of member ports
total-up-ports	(Optional) Total number of UP member ports
first_operational-port	(Optional) First operational port
TABLE_member	(Optional) Member ports info
port	(Optional) Member port
port-status	(Optional) Member port status
age-of-channel	(Optional) Age of port channel
time-since-last-bundle	(Optional) Time since last port bundled
last-bundled-member	(Optional) Last bundled member port
time-since-last-unbundle	(Optional) Time since last port un-bundled
last-unbundled-member	(Optional) Last unbundled member port
protocol	(Optional) Port channel protocol

Command Mode

/exec

show port-channel fast-convergence

show port-channel fast-convergence [ __readonly__ { port-channel fast-convergence <fastconvergence> } ]

Syntax Description


show	Show running system information
port-channel	Configure port channel parameters
fast-convergence	Show port-channel fast-convergence status
__readonly__	(Optional)
fastconvergence	(Optional) port channel fast convergence enable/disable

Command Mode

/exec

show port-channel load-balance

show port-channel load-balance { [ module <module> ] | { fex { all } } } [ __readonly__ [ <sys-cfg> ] + <sys-cfg-sel> [ { <module-cfg> } ] + <non-ip-val> <non-ip-sel> <ipv4-val> <ipv4-sel> [ <ipv6-val> ] [ <ipv4-encap> ] { TABLE_mod_configs [ <mod-number> ] <mod-non-ip-val> <mod-non-ip-sel> <mod-ipv4-val> <mod-ipv4-sel> [ <mod-ipv4-encap> ] } ]

Syntax Description


show	Show running system information
port-channel	Show port-channel information
load-balance	Show port-channel load balance
module	(Optional) slot
module	(Optional) Specify a module number
fex	FEX devices
all	Display all configured FEX port-channel LB
__readonly__	(Optional)
sys-cfg	(Optional) system wide load balance configuraton
sys-cfg-sel	(Optional) system config
module-cfg	(Optional) per module load balance configuraton
non-ip-val	(Optional) load balance setting for non-ip traffic
non-ip-sel	(Optional) non ip select
ipv4-val	(Optional) load balance setting for ipv4 traffic
ipv4-sel	(Optional) ip select
ipv6-val	(Optional) load balance setting for ipv6 traffic
ipv4-encap	(Optional) encapsulation
TABLE_mod_configs	(Optional) module configurations
mod-number	(Optional) module number
mod-non-ip-val	(Optional) load balance setting for non-ip traffic
mod-non-ip-sel	(Optional) non ip select
mod-ipv4-val	(Optional) load balance setting for ipv4 traffic
mod-ipv4-sel	(Optional) ip select
mod-ipv4-encap	(Optional) encapsulation

Command Mode

/exec

show port-channel load-balance forwarding-path1 interface src-interface

show port-channel load-balance forwarding-path1 interface <ch-id> src-interface <src-if> { vlan <vlan-id> | src-mac <src-mac> | dst-mac <dst-mac> | src-ip <src-ip> | dst-ip <dst-ip> | src-ipv6 <src-ipv6> | dst-ipv6 <dst-ipv6> | l4-src-port <l4-src-port> | l4-dst-port <l4-dst-port> | ether-type <ethertype> | ip-proto <prot> } + [ __readonly__ { loadbalance-algorithm <algorithm> } { outgoing-port-id <port> } ]

Syntax Description


show	Show running system information
port-channel	Configure port channel parameters
load-balance	Show port-channel load balance
forwarding-path1	Packet forwarding information
interface	Specify a port-channel number
ch-id	Port-Channel name
vlan	VLAN - for dot1Q tagged packets at ingress
vlan-id	VLAN ID
src-mac	Source MAC Address
src-mac	Source MAC address
dst-mac	Destination MAC Address
dst-mac	Destination MAC address
src-ip	Source IP address
src-ip	Source IP address in format i.i.i.i
dst-ip	Destination IPv4 address
dst-ip	Destination IP address in format i.i.i.i
src-ipv6	Source IPv6 address
dst-ipv6	Destination IPv6 address
l4-src-port	Source Port
l4-src-port	Source L4 port
l4-dst-port	Destination Port
l4-dst-port	Destination L4 port
ether-type	Ethernet Type
ethertype	Ethernet Type
src-interface	Optional source interface (physical switch port only)
src-if	Interface name
ip-proto	IP v4/v6 Protocol
prot	IP Protocol
__readonly__	(Optional)
loadbalance-algorithm	(Optional) load balance algorithm
algorithm	(Optional) algorithm
outgoing-port-id	(Optional) outgoing port-id
port	(Optional) port

Command Mode

/exec

show port-channel load-balance hardware forwarding-path interface source

show port-channel load-balance hardware forwarding-path { interface <ch-id> | hgig } { source-interface <if-id> } { vlan <vlan-id> | src-mac <src-mac> | dst-mac <dst-mac> | src-ip <src-ip> | dst-ip <dst-ip> | src-ipv6 <src-ipv6> | dst-ipv6 <dst-ipv6> | l4-src-port <l4-src-port> | l4-dst-port <l4-dst-port> | ethertype <ethertype> | protocol <prot> } + [ module <module> | fex <fex-range> | hgig-tgid <tgid> ] [ __readonly__ { loadbalance-algorithm <algorithm> } { outgoing-port-id <port> } ]

Syntax Description


show	Show running system information
port-channel	Configure port channel parameters
load-balance	Show port-channel load balance
hardware	ASIC hardware based information
forwarding-path	Packet forwarding information
interface	Specify a port-channel number
ch-id	Port-Channel name
hgig	Higig hashing result (only with RTAG7)
source-interface	Source interface - Required paramter
if-id	Interface name
vlan	VLAN of the ingress packet i.e. when available
vlan-id
src-mac	Source MAC Address
src-mac	Source MAC address
dst-mac	Destination MAC Address
dst-mac	Destination MAC address
src-ip	Source IPv4 address
src-ip	Source IP address in format i.i.i.i
dst-ip	Destination IPv4 address
dst-ip	Destination IP address in format i.i.i.i
src-ipv6	Source IPv6 address
dst-ipv6	Destination IPv6 address
l4-src-port	Source L4 port
l4-src-port	Source L4 port
l4-dst-port	Destination l4 port
l4-dst-port	Destination L4 port
ethertype	Ethertype of the packet stream
ethertype
protocol	Protocol
prot
module	(Optional) Module #
module	(Optional)
fex	(Optional) FEX devices
fex-range	(Optional) FEX device range
hgig-tgid	(Optional) Higig #
tgid	(Optional)
__readonly__	(Optional)
loadbalance-algorithm	(Optional) load balance algorithm
algorithm	(Optional) load balance algorithm
outgoing-port-id	(Optional) outgoing port-id
port	(Optional) outgoing port-id

Command Mode

/exec

show port-channel rbh-distribution

show port-channel rbh-distribution [ interface <if0> ] [ __readonly__ TABLE_channel <chan-id> <port> { <rbh> } + <num_of_buckets> ]

Syntax Description


show	Show running system information
port-channel	Show port-channel information
rbh-distribution	Show RBH distribution for member ports
interface	(Optional) Specify a port-channel interface
if0	(Optional)
__readonly__	(Optional)
TABLE_channel	(Optional) Port-channel table
chan-id	(Optional) Channel ID
port	(Optional) Member port
num_of_buckets	(Optional) Channel ID
rbh	(Optional) Channel ID

Command Mode

/exec

show port-channel scale-fanout

show port-channel scale-fanout [ __readonly__ { port-channel high-density <scalefanout> } ]

Syntax Description


show	Show running system information
port-channel	Configure port channel parameters
scale-fanout	Enable/disable port-channel scale-fanout when ports span more than 16 ASIC units
__readonly__	(Optional)
high-density	(Optional) port channel high density
scalefanout	(Optional) port channel scale fanout enable/disable

Command Mode

/exec

show port-channel summary

show port-channel summary [ interface <if0> | controller ] [ __readonly__ TABLE_channel <group> <port-channel> <layer> <status> <type> <prtcl> [ { TABLE_member <port> <port-status> } ] ]

Syntax Description


show	Show running system information
port-channel	Show port-channel information
summary	Show port-channel summary
interface	(Optional) Specify a port-channel
if0	(Optional)
controller	(Optional) Show controller configured port-channels
__readonly__	(Optional)
TABLE_channel	(Optional) Port-channel table
group	(Optional) Channel group number
port-channel	(Optional) Port channel
type	(Optional) Channel type
prtcl	(Optional) Channel protocol
status	(Optional) Channel status
layer	(Optional) Channel layer info
TABLE_member	(Optional) Member table
port	(Optional) Member port
port-status	(Optional) Member port status

Command Mode

/exec

show port-channel traffic

show port-channel traffic [ interface <if0> ] [ __readonly__ TABLE_channel <chanId> <port> <rx-ucst> <tx-ucst> <rx-mcst> <tx-mcst> <rx-bcst> <tx-bcst> ]

Syntax Description


show	Show running system information
port-channel	Show port-channel information
traffic	Show port-channel traffic statistics
__readonly__	(Optional)
interface	(Optional) Specify a port-channel
if0	(Optional)
TABLE_channel	(Optional) Port-channel table
chanId	(Optional) Channel ID
port	(Optional) Member port
rx-ucst	(Optional) Received unicast
tx-ucst	(Optional) Transmitted unicast
rx-mcst	(Optional) Received multicast
tx-mcst	(Optional) Tranmitted multicast
rx-bcst	(Optional) Received broadcast
tx-bcst	(Optional) Transmitted broadcast

Command Mode

/exec

show port-channel usage

show port-channel usage [ __readonly__ <total-channel-number-used> { <used-range-low> [ <used-range-hi> ] } + { <unused-range-low> [ <unused-range-hi> ] } + ]

Syntax Description


show	Show running system information
port-channel	Show port-channel information
usage	Show port-channel number usage
__readonly__	(Optional)
total-channel-number-used	(Optional) Total used number of port-channels
used-range-low	(Optional) Used range low end value
used-range-hi	(Optional) Used range high end value
unused-range-low	(Optional) Un-used range low end value
unused-range-hi	(Optional) Un-used range high end value

Command Mode

/exec

show port-license

show port-license [ __readonly__ <consumed_port_licenses> [ TABLE_portlicense <interface> <cookie> <port_activation_license> ] ]

Syntax Description


show	Show running system information
port-license	Show port license information
__readonly__	(Optional)
consumed_port_licenses	(Optional) Consumed port licenses
TABLE_portlicense	(Optional) port and licenses
interface	(Optional) interface name
cookie	(Optional) cookie
port_activation_license	(Optional) license state

Command Mode

/exec

show port-profile

show port-profile [ name <all_profile_name> ] [ __readonly__ TABLE_port_profile_all <profile_name> [ <profile_id> ] <type> [ <desc> ] [ <status> ] [ <max_ports> ] [ <min_ports> ] [ <inherit> ] [ <profile_cfg> ] + [ <cmd_depth> ] [ <cmd_key> ] [ <parent_seqno> ] [ <cmd_seqno> ] [ <cmd_attr> ] [ <form_type> ] [ <cmd_mask> ] [ <shadow_cmd> ] [ <cmd_flags> ] [ <eval_cfg> ] + [ <intf> ] + [ <cap_l3> ] [ <cap_iscsi> ] [ <ctrl_sgid> ] [ <pkt_sgid> ] [ <sys_vlans> ] [ <portgrp> ] [ <pprole> ] [ <port_binding> ] ]

Syntax Description


show	Show running system information
port-profile	Show port-profile
name	(Optional) port-profile name
all_profile_name	(Optional) Enter the name of the profile
__readonly__	(Optional)
TABLE_port_profile_all	(Optional)
profile_name	(Optional)
profile_id	(Optional)
type	(Optional)
desc	(Optional)
status	(Optional)
max_ports	(Optional)
min_ports	(Optional)
inherit	(Optional)
profile_cfg	(Optional)
cmd_depth	(Optional)
cmd_key	(Optional)
parent_seqno	(Optional)
cmd_seqno	(Optional)
cmd_attr	(Optional)
form_type	(Optional)
cmd_mask	(Optional)
shadow_cmd	(Optional)
cmd_flags	(Optional)
eval_cfg	(Optional)
intf	(Optional)
cap_l3	(Optional) L3 Profile
cap_iscsi	(Optional) iSCSI cap
ctrl_sgid	(Optional) Control Vlan Pinned Sgid
pkt_sgid	(Optional) Packet Vlan Pinned Sgid
sys_vlans	(Optional) System Vlans
portgrp	(Optional) VMware Portgroup
pprole	(Optional) Port-profile Role
port_binding	(Optional) Port-binding

Command Mode

/exec

show port-profile brief

show port-profile brief [ __readonly__ { TABLE_port_profile [ <profile_name> ] [ <type> ] [ <status> ] [ <profile_cfg_cnt> ] [ <eval_cfg_cnt> ] [ <intf_cnt> ] [ <inherit_cnt> ] [ <header_flag> ] } { TABLE_intf_count [ <intf_type> ] [ <intf_count> ] [ <tot_header_flag> ] } ]

Syntax Description


show	Show running system information
port-profile	Show port-profile
brief	Brief info about profiles
__readonly__	(Optional)
profile_name	(Optional)
TABLE_port_profile	(Optional)
type	(Optional)
status	(Optional)
profile_cfg_cnt	(Optional)
eval_cfg_cnt	(Optional)
intf_cnt	(Optional)
inherit_cnt	(Optional)
header_flag	(Optional)
TABLE_intf_count	(Optional)
intf_type	(Optional)
intf_count	(Optional)
tot_header_flag	(Optional)

Command Mode

/exec

show port-profile expand-interface

show port-profile expand-interface [ name <all_profile_name> ] [ __readonly__ TABLE_port_profile <profile_name> [ TABLE_interface <intf> [ <intf_cfg> ] + ] ]

Syntax Description


show	Show running system information
port-profile	Show port-profile
expand-interface	Active profile config applied in a interface
name	(Optional) port-profile name
all_profile_name	(Optional) Enter the name of the profile
__readonly__	(Optional)
TABLE_port_profile	(Optional)
profile_name	(Optional)
TABLE_interface	(Optional)
intf	(Optional)
intf_cfg	(Optional)

Command Mode

/exec

show port-profile sync-status

show port-profile sync-status [ interface <intfname> ] [ __readonly__ <intf> + [ <inherit> ] <status> + [ <sync_status> ] [ <cached_cmds> ] [ <errors> ] [ <recovery> ] ]

Syntax Description


show	Show running system information
port-profile	Show port-profile
sync-status	Interfaces out-of-sync with port-profiles
interface	(Optional) Interface name
intfname	(Optional) Name of interface
__readonly__	(Optional)
intf	(Optional)
status	(Optional)
inherit	(Optional)
sync_status	(Optional)
cached_cmds	(Optional)
errors	(Optional)
recovery	(Optional)

Command Mode

/exec

show port-profile usage

show port-profile usage [ name <all_profile_name> ] [ __readonly__ TABLE_port_profile <profile_name> [ TABLE_interface <interface> ] ]

Syntax Description


show	Show running system information
port-profile	Show port-profile
usage	List of interfaces inherited a profile
name	(Optional) port-profile name
all_profile_name	(Optional) Enter the name of the profile
__readonly__	(Optional)
TABLE_port_profile	(Optional)
TABLE_interface	(Optional)
profile_name	(Optional)
interface	(Optional)

Command Mode

/exec

show port-security

show port-security [ __readonly__ [ <total_addr> ] [ <max_sys_limit> ] [ { TABLE_eth_port_sec_interfaces <secure_port> <port_state> <max_secure_addr> <security_violation> <security_action> <current_addr> <num_val> <num_elems> <cmdid_show_index> } ] ]

Syntax Description


port-security	Show secure port information
__readonly__	(Optional)
total_addr	(Optional) Total number of secured MAC addresses
max_sys_limit	(Optional) Maximum allowed MACs excluding one per port
TABLE_eth_port_sec_interfaces	(Optional) Displays the secured interfaces
secure_port	(Optional) Interface Index
port_state	(Optional) Port security enabled or disabled
max_secure_addr	(Optional) Maximum number of secured MAC addresses
security_violation	(Optional) Number of security violations
security_action	(Optional) Security Action Shutdown/Restrict/Protect
current_addr	(Optional) Number of secured MAC addresses
num_val	(Optional) Number of Values
num_elems	(Optional) Number of Elements
cmdid_show_index	(Optional) Index for the Interfaces

Command Mode

/exec

show port-security address

show port-security address [ __readonly__ [ <total_addr> ] [ <max_sys_limit> ] [ { TABLE_eth_port_sec_mac_addrs <if_index> <vlan_id> <type> <mac_addr> <remain_age> <remote_learnt> <remote_aged> <num_elems> <cmd_addr_index> } ] ]

Syntax Description


port-security	Show secure port information
address	Show secure address
__readonly__	(Optional)
total_addr	(Optional) Total number of secured MAC addresses
max_sys_limit	(Optional) Maximum allowed MACs excluding one per port
TABLE_eth_port_sec_mac_addrs	(Optional) Displays the secured MAC addresses
if_index	(Optional) Interface index
vlan_id	(Optional) vlan id
type	(Optional) static/sticky/dyanmic MAC address
mac_addr	(Optional) mac address
remain_age	(Optional) Remaining age
remote_learnt	(Optional) Remotely learnt
remote_aged	(Optional) Remotely Aged Out
num_elems	(Optional) Number of Elements
cmd_addr_index	(Optional) Index for the interface address

Command Mode

/exec

show port-security address interface

show port-security address interface <interface-id> [ __readonly__ { TABLE_eth_port_sec_mac_addrs <if_index> <vlan_id> <type> <mac_addr> <remain_age> <remote_learnt> <remote_aged> <num_elems> <cmd_addr_index> } [ <total_addr> ] [ <max_sys_limit> ] [ <first> ] ]

Syntax Description


port-security	Show secure port information
address	Show secure address
interface	Show secure interface
interface-id	ethernet
__readonly__	(Optional)
TABLE_eth_port_sec_mac_addrs	(Optional) Displays the secured MAC addresses
if_index	(Optional) Interface index
vlan_id	(Optional) vlan id
type	(Optional) static/sticky/dyanmic MAC address
mac_addr	(Optional) mac address
remain_age	(Optional) Remaining age
remote_learnt	(Optional) Remotely learnt
remote_aged	(Optional) Remotely Aged Out
num_elems	(Optional) Number of Elements
cmd_addr_index	(Optional) Index for the interface address
total_addr	(Optional) Total number of secured MAC addresses
max_sys_limit	(Optional) Maximum allowed MACs excluding one per port
first	(Optional) To identify the first entry

Command Mode

/exec

show port-security interface

show port-security interface <interface-id> [ __readonly__ <port_status> <config_port_security> <oper_port_security> <violation_mode> <aging_time> <aging_type> <max_mac_addr> <total_sec_addrs> <conf_num_addrs> <num_sticky_addrs> <trap_count> ]

Syntax Description


port-security	Show secure port information
interface	Show secure interface
interface-id	ethernet
__readonly__	(Optional)
port_status	(Optional) Secure Up/Down
config_port_security	(Optional) Port Security configuration is Enabled/Disabled
oper_port_security	(Optional) Port Security is Operationally Enabled/Disabled
violation_mode	(Optional) Shutdown/Restrict/Protect
aging_time	(Optional) Aging time in minutes
aging_type	(Optional) Absolute/Inactivity
max_mac_addr	(Optional) Configured Maximum
total_sec_addrs	(Optional) Total number of secured MAC addresses
conf_num_addrs	(Optional) Number of configured MAC addresses
num_sticky_addrs	(Optional) Number of sticky MAC addresses
trap_count	(Optional) Trap Count

Command Mode

/exec

show port-security state

show port-security state [ __readonly__ <status> ]

Syntax Description


port-security	Port security related command
state	port security state
__readonly__	(Optional)
status	(Optional) show port-security

Command Mode

/exec

show port naming

Syntax Description


show	Show running system information
port	Show port information
naming	Show port naming information

Command Mode

/exec

show postcard-telemetry exporter

show postcard-telemetry exporter [ name ] [ <exportername> ] [ __readonly__ <exporter> <description> <dest> <vrf> <vrf_id> <vrf_resolved> <dest_udp> <source_intf> <source_ip> <seq_num> ]

Syntax Description


show	Show running system information
postcard-telemetry	Show POSTCARD information
exporter	Show POSTCARD Exporter Configuration
name	(Optional) Show a specific POSTCARD Exporter
exportername	(Optional) Specify an exporter
__readonly__	(Optional)
exporter	(Optional)
description	(Optional)
dest	(Optional)
vrf	(Optional)
vrf_id	(Optional)
vrf_resolved	(Optional)
dest_udp	(Optional)
source_intf	(Optional)
source_ip	(Optional)
seq_num	(Optional)

Command Mode

/exec

show postcard-telemetry flow-profile

show postcard-telemetry flow-profile [ name ] [ <flow-profilename> ] [ __readonly__ <flow-profile> <description> <age> <latency> ]

Syntax Description


show	Show running system information
postcard-telemetry	Show POSTCARD information
flow-profile	Show POSTCARD flow Profile Configuration
name	(Optional) Show a specific POSTCARD flow Profile
flow-profilename	(Optional) Specify an flow Profile
__readonly__	(Optional)
flow-profile	(Optional)
description	(Optional)
age	(Optional)
latency	(Optional)

Command Mode

/exec

show postcard-telemetry monitor

show postcard-telemetry monitor [ name ] [ <monitorname> [ cache [ detailed ] ] ] [ __readonly__ <monitor> <use_count> <description> <event> <exporter> <bucket_id> <src_addr> <dest_addr> <watchlist> ]

Syntax Description


show	Show running system information
postcard-telemetry	Show POSTCARD information
monitor	Show Monitor Configuration
name	(Optional) Show a specific POSTCARD Monitor
monitorname	(Optional) Specify a monitor
cache	(Optional) Flow monitor cache contents
detailed	(Optional) Show the entire cache contents
__readonly__	(Optional)
monitor	(Optional)
use_count	(Optional)
description	(Optional)
event	(Optional)
exporter	(Optional)
bucket_id	(Optional)
src_addr	(Optional)
dest_addr	(Optional)
watchlist	(Optional)

Command Mode

/exec

show postcard-telemetry queue-profile

show postcard-telemetry queue-profile [ name ] [ <queue-profilename> ] [ __readonly__ <queue-profile> <description> <depth> <latency> ]

Syntax Description


show	Show running system information
postcard-telemetry	Show POSTCARD information
queue-profile	Show POSTCARD Queue Profile Configuration
name	(Optional) Show a specific POSTCARD Queue Profile
queue-profilename	(Optional) Specify an Queue Profile
__readonly__	(Optional)
queue-profile	(Optional)
description	(Optional)
depth	(Optional)
latency	(Optional)

Command Mode

/exec

show postcard-telemetry sessions

show postcard-telemetry sessions [ <monitorname> ] [ __readonly__ <monitor> ]

Syntax Description


show	Show running system information
postcard-telemetry	Show POSTCARD information
sessions	Show Session Configuration
monitorname	(Optional) Specify a monitor
__readonly__	(Optional)
monitor	(Optional)

Command Mode

/exec

show postcard-telemetry watchlist

show postcard-telemetry watchlist [ name ] [ { <watchlistname> } ] [ __readonly__ <watchlist> <use_count> <description> <num_aces> <ace_seq_num> <ace_action> <ace_type> <ace_sip> <ace_sip_len> <ace_dip> <ace_dip_len> ]

Syntax Description


show	Show running system information
postcard-telemetry	Show POSTCARD information
watchlist	Show watchlist Configuration
name	(Optional) Show the configuration for a specific POSTCARD Record
watchlistname	(Optional) Specify a watchlist
__readonly__	(Optional)
watchlist	(Optional)
use_count	(Optional)
description	(Optional)
num_aces	(Optional)
ace_seq_num	(Optional)
ace_action	(Optional)
ace_type	(Optional)
ace_sip	(Optional)
ace_sip_len	(Optional)
ace_dip	(Optional)
ace_dip_len	(Optional)

Command Mode

/exec

show power inline

show power inline [ __readonly__ { TABLE_fex_info <module_id> <avail_pwr> <used_pwr> <rem_pwr> } { TABLE_intf_info <intf_name> <admin> <oper> <supp_pwr> <del_pwr> <device> <class> <max> } ]

Syntax Description


show	Show running system information
power	Power over Ethernet
__readonly__	(Optional)
TABLE_fex_info	(Optional) FEX information
module_id	(Optional) FEX id
avail_pwr	(Optional) Available power
used_pwr	(Optional) Used power
rem_pwr	(Optional) Free power
TABLE_intf_info	(Optional) Interface information
intf_name	(Optional) Interface name
admin	(Optional) Port mode
oper	(Optional) Oper mode
supp_pwr	(Optional) Supplied power
del_pwr	(Optional) delivered power
device	(Optional) Device information
class	(Optional) POE Class
max	(Optional) Max power

Command Mode

/exec

show power inline

show power inline <if0> [ __readonly__ { TABLE_intf_info <intf_name> <admin> <oper> <supp_pwr> <del_pwr> <device> <class> <max> } ]

Syntax Description


show	Show running system information

Bias-Free Language

Results

Chapter: P Show Commands

P Show Commands

show param-list

show password secure-mode

show password strength-check

show plb

show plb analytics

show plb vrf

show pmap-int-br interface br

show pmap-int

show pnp lease

show pnp posix_pi configs

show pnp posix_pi tech-support

show pnp profiles

show pnp status

show pnp summary

show pnp version

show policy-map

show policy-map interface control-plane

show policy-map system

show policy-map type control-plane

show policy-map type network-qos

show port-channel capacity

show port-channel compatibility-parameters

show port-channel database

show port-channel fast-convergence

show port-channel load-balance

show port-channel load-balance forwarding-path1 interface src-interface

show port-channel load-balance hardware forwarding-path interface source

show port-channel rbh-distribution

show port-channel scale-fanout

show port-channel summary

show port-channel traffic

show port-channel usage

show port-license

show port-profile

show port-profile brief

show port-profile expand-interface

show port-profile sync-status

show port-profile usage

show port-security

show port-security address

show port-security address interface

show port-security interface

show port-security state

show port naming

show postcard-telemetry exporter

show postcard-telemetry flow-profile

show postcard-telemetry monitor

show postcard-telemetry queue-profile

show postcard-telemetry sessions

show postcard-telemetry watchlist

show power inline

show power inline