I Show Commands
show icam entries acl module inst
show icam entries multicast module
show icam prediction entries acl module inst
show icam prediction entries multicast module
show icam prediction resource acl_tcam module inst trend
show icam prediction resource module inst
show icam resource module inst
show icam scale
show ieth-header-decode
show imp client
show imp client sa
show incompatibility-all system
show incompatibility system
show install
show install all failed-standby
show install all failure-reason
show install all impact
show install all status
show install all time-stats
show install impact
show install impact
show install impact detail
show install log
show install packages
show install patches
show interface
show interface
show interface
show interface
show interface
show interface
show interface
show interface
show interface brief
show interface brief
show interface brief
show interface brief
show interface brief
show interface brief
show interface brief
show interface brief
show interface cable-diagnostics-tdr
show interface capabilities
show interface capabilities
show interface counters
show interface counters
show interface counters
show interface counters
show interface counters
show interface counters
show interface counters brief
show interface counters brief
show interface counters detailed
show interface counters detailed
show interface counters detailed
show interface counters detailed
show interface counters detailed all
show interface counters detailed all
show interface counters detailed all
show interface counters detailed all
show interface counters detailed all
show interface counters detailed cached
show interface counters errors
show interface counters errors
show interface counters errors
show interface counters snmp
show interface counters storm-control
show interface counters storm-control
show interface counters table
show interface counters trunk
show interface dampening
show interface debounce
show interface debounce
show interface description
show interface description
show interface description
show interface description
show interface description
show interface description
show interface description
show interface fcoe
show interface flowcontrol
show interface flowcontrol
show interface mac-address
show interface mac-address
show interface private-vlan mapping
show interface pruning
show interface snmp-ifindex
show interface status
show interface status
show interface status
show interface status
show interface status
show interface status
show interface status
show interface status err-disabled
show interface status err-disabled
show interface status err-vlans
show interface status err-vlans
show interface switchport
show interface switchport
show interface transceiver
show interface transceiver
show interface trunk
show interface trunk
show interface untagged-cos
show inventory
show ip adjacency
show ip amt relay
show ip amt route
show ip amt tunnel
show ip arp
show ip arp anycast topo-info
show ip arp cache
show ip arp client
show ip arp controller-statistics
show ip arp esi
show ip arp multihoming-statistics
show ip arp off-list
show ip arp open-flow error-statistics
show ip arp snmp pttree
show ip arp statistics
show ip arp suppression-cache
show ip arp suppression topo-info
show ip arp tunnel-statistics
show ip arp unnum-svi-adj
show ip arp vaddr
show ip arp vpc-statistics
show ip as-path-access-list
show ip bgp
show ip cache
show ip client
show ip community-list
show ip debug
show ip dhcp global statistics
show ip dhcp option82 suboption info interface
show ip dhcp relay
show ip dhcp relay address
show ip dhcp relay information trusted-sources
show ip dhcp relay statistics
show ip dhcp snooping
show ip dhcp snooping binding
show ip dhcp snooping statistics
show ip dhcp status
show ip dns source-interface
show ip dns source-interface vrf all
show ip eigrp route-map statistics
show ip extcommunity-list
show ip fib adjacency
show ip fib interfaces
show ip fib mroute
show ip fib mroute
show ip fib mroute txlist
show ip fib route
show ip fib route
show ip fib route recovered
show ip ftm statistics
show ip ftp source-interface
show ip ftp source-interface vrf all
show ip http source-interface
show ip http source-interface vrf all
show ip igmp event-history
show ip igmp groups
show ip igmp interface
show ip igmp local-groups
show ip igmp policy statistics reports
show ip igmp snooping
show ip igmp snooping event-history
show ip igmp snooping explicit-tracking
show ip igmp snooping filter details
show ip igmp snooping groups
show ip igmp snooping lookup-mode
show ip igmp snooping mac-oif
show ip igmp snooping mrouter
show ip igmp snooping pw vlan brief
show ip igmp snooping querier
show ip igmp snooping report statistics
show ip igmp snooping snmp mib adminMode
show ip igmp snooping snmp mib aliasingMode
show ip igmp snooping snmp mib cisV3ProcessEnableOperStatus
show ip igmp snooping snmp mib explicitTrackingTable
show ip igmp snooping snmp mib fallBackTime
show ip igmp snooping snmp mib fastBlockEnabled
show ip igmp snooping snmp mib fastleaveenabled
show ip igmp snooping snmp mib filterStatsTable
show ip igmp snooping snmp mib ifAccessGroupTable
show ip igmp snooping snmp mib ifConfigTable
show ip igmp snooping snmp mib ifLimitTable
show ip igmp snooping snmp mib ifLimitTotalTable
show ip igmp snooping snmp mib igmpsnoopingenabled
show ip igmp snooping snmp mib iterfaceStatsTable
show ip igmp snooping snmp mib lastMemeberQueryCount
show ip igmp snooping snmp mib lastMemeberQueryInterval
show ip igmp snooping snmp mib leaveQueryType
show ip igmp snooping snmp mib mcastGroupTable
show ip igmp snooping snmp mib mcastRouterCfgTable
show ip igmp snooping snmp mib mcastRouterConfigTable
show ip igmp snooping snmp mib multicastGroupConfigTable
show ip igmp snooping snmp mib multicastGroupPortListTable
show ip igmp snooping snmp mib multicastGroupTable
show ip igmp snooping snmp mib operMode
show ip igmp snooping snmp mib querierTable
show ip igmp snooping snmp mib reportsuppressionenabled
show ip igmp snooping snmp mib robustnessVariable
show ip igmp snooping snmp mib routerAlertCheckEnabled
show ip igmp snooping snmp mib sourceOnlyEntryAgingTime
show ip igmp snooping snmp mib sourceOnlyLearningEnabled
show ip igmp snooping snmp mib tcnFloodQueryCount
show ip igmp snooping snmp mib timeToLiveCheckEnabled
show ip igmp snooping snmp mib topoChanageQuerySolicitEnabled
show ip igmp snooping snmp mib v3ProcessEnabledAdminStatus
show ip igmp snooping snmp mib v3SnoopingSupport
show ip igmp snooping snmp mib vlanFilterConfigTable
show ip igmp snooping snmp mib vlanconfigtable
show ip igmp snooping statistics
show ip igmp vrf all
show ip interface
show ip lisp
show ip lisp data-cache
show ip lisp locator-hash
show ip lisp map-cache
show ip lisp statistics
show ip lisp translate-cache
show ip lisp version-hash
show ip load-sharing
show ip local-pt
show ip local policy
show ip logging
show ip mbgp
show ip mbgp
show ip mbgp community
show ip mbgp dampening
show ip mbgp extcommunity
show ip mbgp flap-statistics
show ip mbgp neighbors
show ip mbgp nexthop-database
show ip mbgp nexthop
show ip mbgp prefix-list
show ip mbgp received-paths
show ip msdp count
show ip msdp event-history
show ip msdp mesh-group
show ip msdp peer
show ip msdp policy statistics sa-policy in
show ip msdp rpf
show ip msdp sa
show ip msdp sources
show ip msdp statistics
show ip msdp summary
show ip nat-alias
show ip nat max
show ip nat statistics
show ip nat timeout
show ip nat translations
show ip ospf
show ip ospf border-routers
show ip ospf database
show ip ospf database database-summary
show ip ospf database detail
show ip ospf event-history
show ip ospf event-history detail
show ip ospf ha
show ip ospf interface
show ip ospf interface brief
show ip ospf lsa-content-changed-list
show ip ospf memory
show ip ospf neighbors
show ip ospf neighbors detail
show ip ospf neighbors summary
show ip ospf policy statistics
show ip ospf request-list
show ip ospf retransmission-list
show ip ospf route
show ip ospf route summary
show ip ospf sham-links
show ip ospf statistics
show ip ospf summary-address
show ip ospf traffic
show ip ospf traps-queue
show ip ospf virtual-links
show ip ospf virtual-links brief
show ip overlay-traffic
show ip pim bitfield
show ip pim config-sanity
show ip pim df
show ip pim event-history
show ip pim fabric info
show ip pim fabric legacy-vlans
show ip pim group-range
show ip pim host-proxy
show ip pim interface
show ip pim mdt
show ip pim mdt bgp
show ip pim mdt history interval
show ip pim mdt receive
show ip pim mdt send
show ip pim neighbor
show ip pim oif-list
show ip pim policy statistics
show ip pim policy statistics jp
show ip pim route
show ip pim rp-hash
show ip pim rp
show ip pim statistics
show ip pim vrf
show ip ping source-interface
show ip ping source-interface vrf all
show ip policy
show ip prefix-list
show ip process
show ip rip policy statistics redistribute
show ip route
show ip router-id
show ip rsvp
show ip sla application
show ip sla configuration
show ip sla enhanced-history collection-statistics
show ip sla enhanced-history distribution-statistics
show ip sla group schedule
show ip sla history
show ip sla reaction-configuration
show ip sla reaction-trigger
show ip sla responder
show ip sla statistics
show ip ssh source-interface
show ip ssh source-interface vrf all
show ip static-route
show ip stats
show ip telnet source-interface
show ip telnet source-interface vrf all
show ip tftp source-interface
show ip tftp source-interface vrf all
show ip traceroute source-interface
show ip traceroute source-interface vrf all
show ip traffic
show ip txlist list
show ip udp relay
show ip udp relay interface
show ip udp relay object-group
show ip verify source
show ipv6 amt tunnel
show ipv6 bgp
show ipv6 bgp
show ipv6 bgp
show ipv6 bgp community
show ipv6 bgp dampening
show ipv6 bgp extcommunity
show ipv6 bgp flap-statistics
show ipv6 bgp neighbors
show ipv6 bgp nexthop-database
show ipv6 bgp nexthop
show ipv6 bgp received-paths
show ipv6 bgp regexp
show ipv6 bgp summary
show ipv6 dhcp-ldra
show ipv6 dhcp-ldra statistics
show ipv6 dhcp guard policy
show ipv6 dhcp relay
show ipv6 dhcp relay statistics
show ipv6 local policy
show ipv6 nd raguard policy
show ipv6 neighbor binding
show ipv6 neighbor binding mac
show ipv6 pim bitfield
show ipv6 pim df
show ipv6 pim embed-rp
show ipv6 pim event-history
show ipv6 pim fabric info
show ipv6 pim fabric legacy-vlans
show ipv6 pim group-range
show ipv6 pim interface show ipv6 pim interface
show ipv6 pim neighbor
show ipv6 pim oif-list
show ipv6 pim policy statistics jp
show ipv6 pim route
show ipv6 pim rp-hash
show ipv6 pim rp
show ipv6 pim statistics
show ipv6 pim vrf
show ipv6 policy
show ipv6 prefix-list
show ipv6 route
show ipv6 snooping capture-policy
show ipv6 snooping counters vlan
show ipv6 snooping events
show ipv6 snooping features
show ipv6 snooping messages
show ipv6 snooping policies
show ipv6 snooping policy
show ipv6 snooping pss database
show isis
show isis adjacency
show isis csnp
show isis database
show isis distribute-ls
show isis event-history
show isis hostname
show isis interface
show isis ipv6 redistribute route
show isis ipv6 route-map statistics
show isis ipv6 route
show isis lslib
show isis lsp free-list
show isis mesh-group
show isis non tlv overflow-list
show isis redistribute route
show isis route-map statistics
show isis route
show isis route is
show isis rrm
show isis segment-routing local-mapcache
show isis segment-routing mapcache
show isis segment-routing remote-srgb
show isis segment-routing sids
show isis spf-adjacency
show isis spf-log
show isis srm
show isis ssn
show isis statistics
show isis summary-address show isis ipv6 summary-address
show isis topology
show isis traffic
show itd
show itd
show itd session device-group
show itd statistics
show itd vrf

I Show Commands

show icam entries acl module inst

show icam entries acl module <module> inst <inst> [ history <num_intervals> ] [ sort { top <top_x> | sort-order { ascending | descending } | filter <f_f> [ exact ] | top <top_x> sort-order { ascending | descending } | top <top_x> filter <f_f> [ exact ] | top <top_x> sort-order { ascending | descending } filter <f_f> [ exact ] | top <top_x> filter <f_f> [ exact ] sort-order { ascending | descending } | sort-order { ascending | descending } top <top_x> | sort-order { ascending | descending } filter <f_f> [ exact ] | sort-order { ascending | descending } filter <f_f> [ exact ] top <top_x> | sort-order { ascending | descending } top <top_x> filter <f_f> [ exact ] | filter <f_f> [ exact ] top <top_x> | filter <f_f> [ exact ] sort-order { ascending | descending } | filter <f_f> [ exact ] top <top_x> sort-order { ascending | descending } | filter <f_f> [ exact ] sort-order { ascending | descending } top <top_x> } ] [ __readonly__ <module> <instance> [ <num_intervals> ] [ { TABLE_ACL_entries <Feature> <Pkt_Type> <SourceIP_Mask_DestIP_Mask> <Action> <Intf_name> <Stats> [ <Rate> ] } ] ]

Syntax Description


show	Show running system information
icam	intelligent CAM
entries	TCAM Entries with result and stats
acl	ACL entries
module	Module Number
module	Enter Module Number
inst	ASIC/Forwarding Engine Instance Number
inst	Enter Instance Number
sort	(Optional) Sorted display
top	(Optional) Show top x% entries (Default:100%)
top_x	(Optional) x% of entries to be displayed
sort-order	(Optional) Choose the order of displaying sorted entries (Default:descending)
ascending	(Optional) Sort in Ascending order of Stats
descending	(Optional) Sort in Descending order of Stats
filter	(Optional) Feature to be filtered (Default:All)
f_f	(Optional) Enter feature to be filtered
exact	(Optional) Exact match for feature filter
history	(Optional) Show entries history
num_intervals	(Optional) Number of intervals to display
__readonly__	(Optional) Read Only
module	(Optional) Module number
instance	(Optional) Instance number
num_intervals	(Optional) Number of intervals displayed
TABLE_ACL_entries	(Optional) Table for ACL entries
Feature	(Optional) Feature name
Pkt_Type	(Optional) Packet type
SourceIP_Mask_DestIP_Mask	(Optional) IP addresses
Action	(Optional) Action
Intf_name	(Optional) Interface name
Stats	(Optional) Total stats
Rate	(Optional) Rate packets/sec

Command Mode

/exec

show icam entries multicast module

show icam entries multicast module <module> [ history <num_intervals> ] [ sort { top <top_x> | sort-order { ascending | descending } | top <top_x> sort-order { ascending | descending } | sort-order { ascending | descending } top <top_x> } ] [ __readonly__ <module> [ <num_intervals> ] [ { TABLE_MULTICAST_entries <Vdc> <Table_Id> <Source_Mask> <Group_Mask> <Rpf> <Stats> [ <Rate> ] } ] ]

Syntax Description


show	Show running system information
icam	intelligent CAM
entries	TCAM Entries with result and stats
multicast	Multicast entries
module	Module Number
module	Enter Module Number
sort	(Optional) Sorted display
top	(Optional) Show top x% entries (Default:100%)
top_x	(Optional) x% of entries to be displayed
sort-order	(Optional) Choose the order of displaying sorted entries (Default:Descending)
ascending	(Optional) Sort in Ascending order of Stats
descending	(Optional) Sort in Descending order of Stats
history	(Optional) Show entries history
num_intervals	(Optional) Number of intervals to display
__readonly__	(Optional) Read Only
module	(Optional) Module number
num_intervals	(Optional) Number of intervals displayed
TABLE_MULTICAST_entries	(Optional) Table for Multicast entries
Vdc	(Optional) VDC id
Table_Id	(Optional) Table id
Source_Mask	(Optional) Source address
Group_Mask	(Optional) Group address
Rpf	(Optional) RPF/Ordinal
Stats	(Optional) Total stats
Rate	(Optional) Rate packets/sec

Command Mode

/exec

show icam prediction entries acl module inst

show icam prediction entries acl module <module> inst <inst> <YYYY> <Month> <Date> <Time> [ top <top_x> ] [ __readonly__ <module> <instance> [ { TABLE_PREDICTION_ACL_entries <Feature> <Pkt_Type> <Value_Mask> <Action> <Intf_name> <Stats> <Prediction> } ] ]

Syntax Description


show	Show running system information
icam	intelligent CAM
prediction	Machine learning prediction
entries	TCAM Entries with result and stats
acl	ACL entries
module	Module Number
module	Enter Module Number
inst	ASIC/Forwarding Engine Instance Number
inst	Enter Instance Number
YYYY	Enter year in YYYY format
Month	Enter Month as Jan, Feb, Mar, ..., Oct, Nov, or Dec
Date	Enter day of month in dd format
Time	Enter hour, minutes, seconds as HH:MM:SS
top	(Optional) Show top x% entries (Default:1%)
top_x	(Optional) x% of entries to be displayed
__readonly__	(Optional) Read Only
module	(Optional) Module number
instance	(Optional) Instance number
TABLE_PREDICTION_ACL_entries	(Optional) Table for ACL entries prediction
Feature	(Optional) Feature name
Pkt_Type	(Optional) Packet type
Value_Mask	(Optional) Value mask
Action	(Optional) Action
Intf_name	(Optional) Interface name
Stats	(Optional) Current stats
Prediction	(Optional) Prediction

Command Mode

/exec

show icam prediction entries multicast module

show icam prediction entries multicast module <module> <YYYY> <Month> <Date> <Time> [ top <top_x> ] [ __readonly__ <module> [ { TABLE_PREDICTION_MULTICAST_entries <Vdc> <Table_Id> <Source_Mask> <Group_Mask> <Rpf> <Stats> <Prediction> } ] ]

Syntax Description


show	Show running system information
icam	intelligent CAM
prediction	Machine learning prediction
entries	TCAM Entries with result and stats
multicast	Multicast entries
module	Module Number
module	Enter Module Number
YYYY	Enter year in YYYY format
Month	Enter Month as Jan, Feb, Mar, ..., Oct, Nov, or Dec
Date	Enter day of month in dd format
Time	Enter hour, minutes, seconds as HH:MM:SS
top	(Optional) Show top x% entries (Default:1%)
top_x	(Optional) x% of entries to be displayed
__readonly__	(Optional) Read Only
module	(Optional) Module number
TABLE_PREDICTION_MULTICAST_entries	(Optional) Table for multicast entries prediction
Vdc	(Optional) VDC id
Table_Id	(Optional) Table id
Source_Mask	(Optional) Source address
Group_Mask	(Optional) Group address
Rpf	(Optional) RPF/Ordinal
Stats	(Optional) Current stats
Prediction	(Optional) Prediction

Command Mode

/exec

show icam prediction resource acl_tcam module inst trend

show icam prediction resource acl_tcam module <module> inst <inst> trend [ __readonly__ <module> <instance> [ { TABLE_PREDICTION_ACL_feature <Feature> <Dir> <TCAM> <BANK> <Feature_Entries1> <Free_Entries1> <Percent_Util1> <Feature_Entries2> <Free_Entries2> <Percent_Util2> <Feature_Entries3> <Free_Entries3> <Percent_Util3> } ] [ <mod> <inst> { TABLE_PREDICTION_ACL_tcam <Tcam_no> <Bank_no> <Used1> <Free1> <Util1> <Used2> <Free2> <Util2> <Used3> <Free3> <Util3> } ] ]

Syntax Description


show	Show running system information
icam	intelligent CAM
prediction	Machine learning prediction
resource	TCAM Resource utilization
acl_tcam	ACL TCAM resource
module	Module Number
module	Enter Module Number
inst	ASIC/Forwarding Engine Instance Number
inst	Enter Instance Number
trend	ACL Prediction Trend
__readonly__	(Optional) Read Only
module	(Optional) Module number
instance	(Optional) Instance number
TABLE_PREDICTION_ACL_feature	(Optional) ACL Feature utilization predictions
Feature	(Optional) Feature name
Dir	(Optional) Direction
TCAM	(Optional) TCAM entry
BANK	(Optional) BANK entry
Feature_Entries1	(Optional) +24Hr Feature_Entries
Free_Entries1	(Optional) +24Hr Free_Entries
Percent_Util1	(Optional) +24Hr Percent_Util
Feature_Entries2	(Optional) +48Hr Feature_Entries
Free_Entries2	(Optional) +48Hr Free_Entries
Percent_Util2	(Optional) +48Hr Percent_Util
Feature_Entries3	(Optional) +1wk Feature_Entries
Free_Entries3	(Optional) +1wk Free_Entries
Percent_Util3	(Optional) +1wk Percent_Util
mod	(Optional) Module number
inst	(Optional) Instance number
TABLE_PREDICTION_ACL_tcam	(Optional) ACL TCAM utilization predictions
Tcam_no	(Optional) Tcam number
Bank_no	(Optional) Bank number
Used1	(Optional) +24Hr Used
Free1	(Optional) +24Hr Free
Util1	(Optional) +24Hr Percent_Util
Used2	(Optional) +48Hr Used
Free2	(Optional) +48Hr Free
Util2	(Optional) +48Hr Percent_Util
Used3	(Optional) +1wk Used
Free3	(Optional) +1wk Free
Util3	(Optional) +1wk Percent_Util

Command Mode

/exec

show icam prediction resource module inst

show icam prediction resource { acl_tcam | fib_tcam | l2_table } module <module> inst <inst> <YYYY> <Month> <Date> <Time> [ __readonly__ <module> <instance> [ { TABLE_PREDICTION_ACL_feature <Feature> <Dir> <TCAM> <BANK> <Feature_Entries> <Free_Entries> <Percent_Util> } ] [ <mod> <inst> { TABLE_PREDICTION_ACL_tcam <Tcam_no> <Bank_no> <Used> <Free> <Percent_Util> } ] [ { TABLE_PREDICTION_FIB_tcam <Class> <Used_Entries> <Max_Entries> <Percent_Util> } ] [ { TABLE_PREDICTION_L2_TABLE <Used_Entries> <Free_Entries> <Percent_Util> } ] ]

Syntax Description


show	Show running system information
icam	intelligent CAM
prediction	Machine learning prediction
resource	TCAM Resource utilization
acl_tcam	ACL TCAM resource
fib_tcam	FIB TCAM resource
l2_table	L2 TABLE reosurce
module	Module Number
module	Enter Module Number
inst	ASIC/Forwarding Engine Instance Number
inst	Enter Instance Number
YYYY	Enter year in YYYY format
Month	Enter Month as Jan, Feb, Mar, ..., Oct, Nov, or Dec
Date	Enter day of month in dd format
Time	Enter hour, minutes, seconds as HH:MM:SS
__readonly__	(Optional) Read Only
module	(Optional) Module number
instance	(Optional) Instance number
TABLE_PREDICTION_ACL_feature	(Optional) ACL Feature utilization predictions
Feature	(Optional) Feature name
Dir	(Optional) Direction
TCAM	(Optional) TCAM entry
BANK	(Optional) BANK entry
Feature_Entries	(Optional) Feature_Entries
Free_Entries	(Optional) Free_Entries
Percent_Util	(Optional) Percent_Util
mod	(Optional) Module number
inst	(Optional) Instance number
TABLE_PREDICTION_ACL_tcam	(Optional) ACL TCAM utilization predictions
Tcam_no	(Optional) Tcam number
Bank_no	(Optional) Bank number
Used	(Optional) Used
Free	(Optional) Free
Percent_Util	(Optional) Percent_Util
TABLE_PREDICTION_FIB_tcam	(Optional) FIB TCAM utilization predictions
Class	(Optional) FIB class
Used_Entries	(Optional) Used entries
Max_Entries	(Optional) Max entries
Percent_Util	(Optional) Percent_Util
TABLE_PREDICTION_L2_TABLE	(Optional) L2 TABLE Util prediction
Used_Entries	(Optional) Used
Free_Entries	(Optional) Free
Percent_Util	(Optional) Percent_Util

Command Mode

/exec

show icam resource module inst

show icam resource { acl_tcam | fib_tcam | l2_table } module <module> inst <inst> [ history <num_intervals> ] [ __readonly__ <module> <instance> [ { TABLE_feature_resource <Feature> <TCAM> <BANK> [ { TABLE_ingress_stats <Feature_Entries> <Free_Entries> <Percent_Util> <Timestamp> } ] } ] [ { TABLE_egress_feature_resource <Feature> <TCAM> <BANK> [ { TABLE_egress_stats <Feature_Entries> <Free_Entries> <Percent_Util> <Timestamp> } ] } ] [ <mod> <inst> { TABLE_tcam_bank_utilization <Tcam_no> <Bank_no> [ { TABLE_tcam_bank_stats <Used> <Free> <Percent_Util> <Timestamp> } ] } ] [ { TABLE_global_configs <Atomic_Update> <Bank_Chain_Mode> <Dynamic_Bank_Mapping> <LOU_Threshold_Value> } ] [ { TABLE_fib_resource <Class> [ { TABLE_fib_stats <Used_Entries> <Max_Entries> <Percent_Util> <Timestamp> } ] } ] [ { TABLE_l2_table_resource <Total_Entries> <Used_Entries> <Percent_Util> <Timestamp> } ] ]

Syntax Description


show	Show running system information
icam	intelligent CAM
resource	TCAM Resource utilization
acl_tcam	ACL TCAM resource
fib_tcam	FIB TCAM resource
l2_table	L2 TABLE resource
module	Module Number
module	Enter Module Number
inst	ASIC/Forwarding Engine Instance Number
inst	Enter Instance Number
history	(Optional) Show resource history
num_intervals	(Optional) Number of intervals in history
__readonly__	(Optional) Read Only
module	(Optional) Module number
instance	(Optional) Instance number
TABLE_feature_resource	(Optional) Table for ingress feature resources
Feature	(Optional) Feature name
TCAM	(Optional) TCAM entry
BANK	(Optional) BANK entry
TABLE_ingress_stats	(Optional) Table for ingress feature stats
Feature_Entries	(Optional) Feature_Entries
Free_Entries	(Optional) Free_Entries
Percent_Util	(Optional) Percent_Util
Timestamp	(Optional) Timestamp
TABLE_egress_feature_resource	(Optional) Table for egress feature resources
Feature	(Optional) Feature name
TCAM	(Optional) TCAM entry
BANK	(Optional) BANK entry
TABLE_egress_stats	(Optional) Table for egress feature stats
Feature_Entries	(Optional) Feature_Entries
Free_Entries	(Optional) Free_Entries
Percent_Util	(Optional) Percent_Util
Timestamp	(Optional) Timestamp
mod	(Optional) Module number
inst	(Optional) Instance number
TABLE_tcam_bank_utilization	(Optional) Table for tcam and bank utilization
Tcam_no	(Optional) Tcam number
Bank_no	(Optional) Bank number
TABLE_tcam_bank_stats	(Optional) Table for tcam and bank stats
Used	(Optional) Used
Free	(Optional) Free
Percent_Util	(Optional) Percent_Util
Timestamp	(Optional) Timestamp
TABLE_global_configs	(Optional) TABLE_global_configs
Atomic_Update	(Optional) Atomic_Update
Bank_Chain_Mode	(Optional) Bank_Chain_Mode
Dynamic_Bank_Mapping	(Optional) Dynamic_Bank_Mapping
LOU_Threshold_Value	(Optional) LOU_Threshold_Value
TABLE_fib_resource	(Optional) Table for fib resources
Class	(Optional) FIB class
TABLE_fib_stats	(Optional) Table for fib resource stats
Used_Entries	(Optional) Used entries
Max_Entries	(Optional) Max entries
Percent_Util	(Optional) Percent_Util
Timestamp	(Optional) Timestamp
TABLE_l2_table_resource	(Optional) Table for L2 Resources
Total_Entries	(Optional) Total L2 entries
Used_Entries	(Optional) Used L2 entries
Percent_Util	(Optional) Percent_Util
Timestamp	(Optional) Timestamp

Command Mode

/exec

show icam scale

show icam scale [ { { l2-switching [ mac-addresses | mst-instances | mst-vports | rpvst-vports | rpvst-vlans | vlans ] } | { multicast-routing [ multicast-routes | igmp-groups | pim-neighbors | outgoing-interfaces ] } | { unicast-routing [ bfd-sessions | eigrp-routes | ipv4-arp | ipv4-host-routes | ipv6-host-routes | ipv4-isis-routes | ospf-size ] } | { vxlan [ test ] } } ] [ history <num_intervals> | utilization | thresholds ] [ __readonly__ [ <Info_Thres> <Warn_Thres> <Crit_Thres> ] [ { TABLE_technology <Technology> [ { TABLE_feature <Feature> <Verified_Scale> <Config_Scale> [ { TABLE_feature_stats <Used_Entries> <Cur_Util> [ <Thres_Exceeded> <Polled_TS> ] [ <Avg_Util> ] [ <Week_Util> <Week_TS> ] [ <Peak_Util> <Peak_TS> ] [ <Info_Thres_Exceed> <Info_Thres_Exceed_TS> <Warn_Thres_Exceed> <Warn_Thres_Exceed_TS> <Crit_Thres_Exceed> <Crit_Thres_Exceed_TS> ] } ] } ] } ] ]

Syntax Description


show	Show running system information
icam	intelligent CAM
scale	Verified scale
l2-switching	(Optional) Layer 2 switching
multicast-routing	(Optional) Multicast routing
unicast-routing	(Optional) Unicast routing
vxlan	(Optional) VxLAN
mac-addresses	(Optional) MAC addresses
mst-instances	(Optional) MST instances
mst-vports	(Optional) MST virtual ports
rpvst-vports	(Optional) RPVST virtual ports
rpvst-vlans	(Optional) RPVST VLANs
vlans	(Optional) VLANs
multicast-routes	(Optional) Multicast routes
igmp-groups	(Optional) IGMP groups
pim-neighbors	(Optional) PIM neighbors
outgoing-interfaces	(Optional) Outgoing interfaces
bfd-sessions	(Optional) BFD sessions
eigrp-routes	(Optional) EIGRP routes
ipv4-arp	(Optional) IPv4 ARP
ipv4-host-routes	(Optional) IPv4 host routes
ipv6-host-routes	(Optional) IPv6 host routes
ipv4-isis-routes	(Optional) IPv4 IS-IS routes
ospf-size	(Optional) OSPF size
test	(Optional) VxLAN test
history	(Optional) Show scale history
num_intervals	(Optional) Number of intervals in history
utilization	(Optional) Show utilization statistics
thresholds	(Optional) Show thresholds statistics
__readonly__	(Optional) Read Only
Info_Thres	(Optional) Configured info threshold percent
Warn_Thres	(Optional) Configured warning threshold percent
Crit_Thres	(Optional) Configured critical threshold percent
TABLE_technology	(Optional) Table technology
Technology	(Optional) Technology name
TABLE_feature	(Optional) Table feature
Feature	(Optional) Feature name
Verified_Scale	(Optional) Verified scale
Config_Scale	(Optional) Configured scale
TABLE_feature_stats	(Optional) Table feature stats
Used_Entries	(Optional) Used entries
Cur_Util	(Optional) Current utilization
Thres_Exceeded	(Optional) Threshold type exceeded
Polled_TS	(Optional) Polled timestamp
Avg_Util	(Optional) Average utilization
Week_Util	(Optional) 1 week utilization
Week_TS	(Optional) 1 week peak utilization timestamp
Peak_Util	(Optional) Peak utilization
Peak_TS	(Optional) Peak utilization timestamp
Info_Thres_Exceed	(Optional) Number of times info threshold exceeded
Info_Thres_Exceed_TS	(Optional) Last info threshold exceeded timestamp
Warn_Thres_Exceed	(Optional) Number of times warning threshold exceeded
Warn_Thres_Exceed_TS	(Optional) Last warning threshold exceeded timestamp
Crit_Thres_Exceed	(Optional) Number of times critical threshold exceeded
Crit_Thres_Exceed_TS	(Optional) Last critical threshold exceeded timestamp

Command Mode

/exec

show ieth-header-decode

show ieth-header-decode <ieth>

Syntax Description


show	Show running system information
ieth-header-decode	Show decode of ieth header
ieth	ieth header in hex (0xFF...) or string (FF..) form

Command Mode

/exec

show imp client

Syntax Description


show	Show running system information
imp	ipsec management process
client	Show ipsec clients name

Command Mode

/exec

show imp client sa

Syntax Description


show	Show running system information
imp	IPSec management process
client	IMP clinet
sa	Display all SAs

Command Mode

/exec

show incompatibility-all system

show incompatibility-all { system <uri0> | nxos <uri1> } [ __readonly__ { [ TABLE_incompat_all <Str1> [ <Serv> ] [ <Cap> ] [ <Desc> ] [ <Req> ] [ <Enable> ] ] [ <Dynamic> ] } ]

Syntax Description


show	Show running system information
incompatibility-all	Show incompatible configurations for the entire system
system	show incompatibilities with an image
uri0	Enter image uri
nxos	show incompatibilities with an image
uri1	Enter image uri
__readonly__	(Optional)
TABLE_incompat_all	(Optional) Show incompatibility system table
Str1	(Optional)
Serv	(Optional)
Cap	(Optional)
Desc	(Optional)
Req	(Optional)
Enable	(Optional)
Dynamic	(Optional)

Command Mode

/exec

show incompatibility system

show incompatibility { system <uri0> | nxos <uri1> } [ __readonly__ { [ TABLE_incompat <Str1> [ <Serv> ] [ <Cap> ] [ <Desc> ] [ <Req> ] [ <Enable> ] ] [ <Dynamic> ] } ]

Syntax Description


show	Show running system information
incompatibility	Show incompatible configurations
system	show incompatibilities with an image
uri0	Enter image uri
nxos	show incompatibilities with an image
uri1	Enter image uri
__readonly__	(Optional)
TABLE_incompat	(Optional) Show incompatibility system table
Str1	(Optional)
Serv	(Optional)
Cap	(Optional)
Desc	(Optional)
Req	(Optional)
Enable	(Optional)
Dynamic	(Optional)

Command Mode

/exec

show install

show install { inactive | active [ brief ] | committed } [ __readonly__ { <curr_nxos_image> [ TABLE_smu_list <install_smu_id> + ] [ TABLE_package_list <package_id> ] } ]

Syntax Description


show	Show running system information
install	Install related show commands
inactive	Inactive packages
active	Active packages
brief	(Optional) Brief
committed	Committed packages
__readonly__	(Optional)
curr_nxos_image	(Optional) NXOS image
TABLE_smu_list	(Optional)
install_smu_id	(Optional) install operation smu identifier
TABLE_package_list	(Optional)
package_id	(Optional) Package name

Command Mode

/exec

show install all failed-standby

show install all failed-standby [ __readonly__ { [ TABLE_installFailStandby <Str1> ] } ]

Syntax Description


show	Show running system information
install	Show the software install impact between two images
all	Show install all information
failed-standby	show log from failed standby
__readonly__	(Optional)
TABLE_installFailStandby	(Optional) Install failed-standby table
Str1	(Optional)

Command Mode

/exec

show install all failure-reason

show install all failure-reason [ __readonly__ { [ TABLE_installFailReason <installFailReasonStr> ] } ]

Syntax Description


show	Show running system information
install	Show the software install impact between two images
all	show install all information
failure-reason	Show failure reason for the last install all
__readonly__	(Optional)
TABLE_installFailReason	(Optional) Install failure-reason table
installFailReasonStr	(Optional)

Command Mode

/exec

show install all impact

show install all impact [ nxos <uri> ] + [ non-disruptive ]

Syntax Description


show	Show running system information
install	Show the software install impact between two images
all	show install all information
impact	show impact of the install all command
nxos	(Optional) boot-variable name
uri	(Optional) Enter image uri
non-disruptive	(Optional) non-disruptive show install

Command Mode

/exec

show install all status

Syntax Description


show	Show running system information
install	Show the software install impact between two images
all	show install all information
status	show status of the current or last install all

Command Mode

/exec

show install all time-stats

show install all time-stats [ detail | handshake ]

Syntax Description


show	Show running system information
install	Show the software install impact between two images
all	show install all information
time-stats	show overall time statistics of the last install all
detail	(Optional) show detailed time statistics of the last install all
handshake	(Optional) show handshake time statistics for sysmgr and lc processes of the last install all

Command Mode

/exec

show install impact

show install impact <uri0> <uri1>

Syntax Description


show	Show running system information
install	Show the software install impact between two images
impact	impact system_uri {active_system_uri/active_kickstart_uri}
uri0	Enter system URI
uri1	Enter active URI

Command Mode

/exec

show install impact

show install impact <uri0>

Syntax Description


show	Show running system information
install	Show the software install impact between two images
impact	impact system_uri {active_system_uri/active_kickstart_uri}
uri0	Enter system URI

Command Mode

/exec

show install impact detail

show install impact <uri0> detail

Syntax Description


show	Show running system information
install	Show the software install impact between two images
impact	impact system_uri {active_system_uri/active_kickstart_uri}
uri0	Enter system URI
detail	Show detailed install impact of given system image

Command Mode

/exec

show install log

show install log { [ <id> | from <id1> ] [ detail ] [ reverse ] | [ last ] } [ __readonly__ { current_time <curr_time> [ TABLE_show_log_output <install_id> <install_log_entry> + ] } ]

Syntax Description


show	Show running system information
install	Install related show commands
log	log
id	(Optional) Install Identifies
from	(Optional) Starting at this install identifier
id1	(Optional) Install Identifier
detail	(Optional) Detailed information including impacted processes
reverse	(Optional) Displays the logs in reverse order
last	(Optional) Display the logs for last install operation
__readonly__	(Optional)
current_time	(Optional) current time
curr_time	(Optional) current time
TABLE_show_log_output	(Optional)
install_id	(Optional) install operation id
install_log_entry	(Optional) install log entry

Command Mode

/exec

show install packages

show install packages [ __readonly__ { <curr_nxos_image> [ TABLE_package_list <package_name> <version> <state> ] } ]

Syntax Description


show	Show running system information
install	Install related show commands
packages	All packages
__readonly__	(Optional)
curr_nxos_image	(Optional) NXOS image
TABLE_package_list	(Optional)
package_name	(Optional) Package name
version	(Optional) Package version
state	(Optional) package state

Command Mode

/exec

show install patches

show install patches [ __readonly__ { <curr_nxos_image> [ TABLE_smu_list <install_smu_id> <install_smu_state> [ TABLE_module_list <install_modno> <install_mod_smu_state> ] ] } ]

Syntax Description


show	Show running system information
install	Install related show commands
patches	All Patches
__readonly__	(Optional)
TABLE_smu_list	(Optional)
curr_nxos_image	(Optional) NXOS image
install_smu_id	(Optional) install operation smu identifier
install_smu_state	(Optional) install operation smu state
TABLE_module_list	(Optional)
install_modno	(Optional) install operation module number
install_mod_smu_state	(Optional) install operation module state

Command Mode

/exec

show interface

show interface <iftun_desc> [ __readonly__ TABLE_interface <interface> <state> [ <state_rsn_desc> ] [ <desc> ] <admin-state> { <tunnel-ipv4> | <tunnel-ipv6> } <mtu> <bandwidth> <encap-type> <keepalive-period> <keepalive-retries> { <src-ipv4> | <src-ipv6> } <src-intf> { <dest-ipv4> | <dest-ipv6> } <dest-hostname> <vrf_name> <wccp_header> <ttl_val> <tunnel_pmtud_age_time> <tunnel_pmtud_min_mtu> <tunnel_pmtud> <tunnel_pgm_mtu> <tunnel_rx_pkt_count> <tunnel_rx_byte_count> <tunnel_rx_rate> <tunnel_tx_pkt_count> <tunnel_tx_byte_count> <tunnel_tx_rate> <tunnel_clear_counter> ]

Syntax Description


show	Show running system information
interface	Show interface status and information
iftun_desc	Enter tunnel interface number
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
state	(Optional) Interface state
state_rsn_desc	(Optional) Interface state reason detailed
desc	(Optional) Interface description
admin-state	(Optional)
tunnel-ipv4	(Optional) interface IPv4 address
mtu	(Optional) interface Maximum Transmission Unit
bandwidth	(Optional) interface Bandwidth in kilobits
encap-type	(Optional)
keepalive-period	(Optional) keealive period
keepalive-retries	(Optional) number of retries
src-ipv4	(Optional) tunnel source IPv4 address
src-intf	(Optional) tunnel source interface
dest-ipv4	(Optional) tunnel destination IPv4 address
dest-hostname	(Optional) tunnel destination hostname
vrf_name	(Optional) transport VRF name
wccp_header	(Optional) wccp header
ttl_val	(Optional) tunnel time to live value
tunnel_pmtud_age_time	(Optional) tunnel path MTU discovery age time
tunnel_pmtud_min_mtu	(Optional) tunnel path MTU discovery min mtu
tunnel_pmtud	(Optional) tunnel path MTU discovered
tunnel_pgm_mtu	(Optional) tunnel actual programmed MTU
tunnel_rx_pkt_count	(Optional) total number of packets received
tunnel_rx_byte_count	(Optional) total number of bytes received
tunnel_rx_rate	(Optional) packets input rate per 5 minutes
tunnel_tx_pkt_count	(Optional) total number of packets transmitted
tunnel_tx_byte_count	(Optional) total number of bytes transmitted
tunnel_tx_rate	(Optional) packets transmitted per 5 minutes
tunnel_clear_counter	(Optional) Last clearing of show interface counters

Command Mode

/exec

show interface

show interface <ifid> [ brief | quick ] [ __readonly__ TABLE_interface <interface> [ <desc> ] [ [ <svi_if_index> ] [ <svi_admin_state> ] [ <svi_rsn_desc> ] [ <svi_line_proto> ] [ <svi_hw> ] [ <svi_mac> ] [ <svi_desc> ] [ <svi_ip_addr> ] [ <svi_ip_mask> ] [ <svi_mtu> ] [ <svi_bw> ] [ <svi_delay> ] ] [ [ <svi_tx_load> ] [ <svi_rx_load> ] ] [ [ <svi_carrier_delay_sec> ] [ <svi_carrier_delay_msec> ] [ <svi_arp_type> ] [ <svi_arp_timeout> ] ] [ [ <svi_time_last_cleared> ] ] [ { [ TABLE_sec_vlan ] [ <sec_vlan> ] [ <sec_vlan_type> ] } ] [ [ <eth_load_interval1_rx> ] [ <eth_inrate1_bits> ] [ <eth_inrate1_pkts> ] [ <eth_load_interval1_tx> ] [ <eth_outrate1_bits> ] [ <eth_outrate1_pkts> ] [ <eth_load_interval2> ] [ <eth_inrate2_bits> ] [ <eth_inrate2_pkts> ] [ <eth_outrate2_bits> ] [ <eth_outrate2_pkts> ] [ <eth_load_interval3> ] [ <eth_inrate3_bits> ] [ <eth_inrate3_pkts> ] [ <eth_outrate3_bits> ] [ <eth_outrate3_pkts> ] [ <eth_l2_ucastpkts> ] [ <eth_l2_ucastbytes> ] [ <eth_l2_mcastpkts> ] [ <eth_l2_mcastbytes> ] [ <eth_l2_bcastpkts> ] [ <eth_l2_bcastbytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_ucastbytes> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_mcastbytes> ] [ <eth_l3in_bcastpkts> ] [ <eth_l3in_bcastbytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_ucastbytes> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_mcastbytes> ] [ <eth_l3out_bcastpkts> ] [ <eth_l3out_bcastbytes> ] [ <eth_l3in_routed_pkts> ] [ <eth_l3in_routed_bytes> ] [ <eth_l3out_routed_pkts> ] [ <eth_l3out_routed_bytes> ] [ <eth_l3avg1_inbytes> ] [ <eth_l3avg1_inpkts> ] [ <eth_l3avg1_outbytes> ] [ <eth_l3avg1_outpkts> ] [ <eth_l3avg2_inbytes> ] [ <eth_l3avg2_inpkts> ] [ <eth_l3avg2_outbytes> ] [ <eth_l3avg2_outpkts> ] [ <eth_l3avg3_inbytes> ] [ <eth_l3avg3_inpkts> ] [ <eth_l3avg3_outbytes> ] [ <eth_l3avg3_outpkts> ] [ <eth_inpkts> ] [ <eth_inbytes> ] [ <eth_nobuf> ] [ <eth_inbcast> ] [ <eth_inmcast> ] [ <eth_inucast> ] [ <eth_ingiants> ] [ <eth_ipmcast> ] [ <eth_inhw_switched> ] [ <eth_insw_switched> ] [ <eth_runts> ] [ <eth_storm_supp> ] [ <eth_throtles> ] [ <eth_inerr> ] [ <eth_crc> ] [ <eth_ecc> ] [ <eth_frame> ] [ <eth_overrun> ] [ <eth_ignored> ] [ <eth_watchdog> ] [ <eth_outbcast> ] [ <eth_outmcast> ] [ <eth_outucast> ] [ <eth_outgiants> ] [ <eth_inpause> ] [ <eth_dribble> ] [ <eth_in_ifdown_drops> ] [ <eth_bad_eth> ] [ <eth_bad_proto> ] [ <eth_outpkts> ] [ <eth_outbytes> ] [ <eth_underrun> ] [ <eth_outhw_switched> ] [ <eth_outsw_switched> ] [ <eth_outerr> ] [ <eth_coll> ] [ <eth_resets> ] [ <eth_babbles> ] [ <eth_latecoll> ] [ <eth_deferred> ] [ <eth_lostcarrier> ] [ <eth_nocarrier> ] [ <eth_outpause> ] [ <eth_buffail> ] [ <eth_bufswapped> ] [ <eth_arpdrops> ] [ <eth_out_ifdown_drops> ] [ <eth_single_coll> ] [ <eth_multi_coll> ] [ <eth_excess_coll> ] [ <eth_jabbers> ] [ <eth_shortframe> ] [ <eth_indiscard> ] [ <eth_bad_encap> ] [ <eth_outcrc> ] [ <eth_symbol> ] [ <eth_out_drops> ] [ <eth_sqetest> ] [ <eth_inb64> ] [ <eth_inb65_127> ] [ <eth_inb128_255> ] [ <eth_inb256_511> ] [ <eth_inb512_1023> ] [ <eth_inb1024_1518> ] [ <eth_inb1519_1548> ] [ <eth_intrunk> ] [ <eth_outb64> ] [ <eth_outb65_127> ] [ <eth_outb128_255> ] [ <eth_outb256_511> ] [ <eth_outb512_1023> ] [ <eth_outb1024_1518> ] [ <eth_outb1519_1548> ] [ <eth_outtrunk> ] [ <eth_bpdu_outlost> ] [ <eth_cos0_outlost> ] [ <eth_cos1_outlost> ] [ <eth_cos2_outlost> ] [ <eth_cos3_outlost> ] [ <eth_cos4_outlost> ] [ <eth_cos5_outlost> ] [ <eth_cos6_outlost> ] [ <eth_cos7_outlost> ] [ <eth_fcoe_in_pkts> ] [ <eth_fcoe_in_octets> ] [ <eth_fcoe_out_pkts> ] [ <eth_fcoe_out_octets> ] [ <eth_nfcoe_in_pkts> ] [ <eth_nfcoe_in_octets> ] [ <eth_nfcoe_out_pkts> ] [ <eth_nfcoe_out_octets> ] [ <eth_eee_atx_lpi_msec> ] [ <eth_eee_arcv_lpi_msec> ] [ <eth_eee_atx_lpi_transitions> ] [ <eth_eee_arcv_lpi_transitions> ] [ <eth_phy_ber_count> ] [ <eth_phy_errblks_count> ] ] [ [ <svi_routed_pkts_in> ] [ <svi_routed_bytes_in> ] [ <svi_routed_pkts_out> ] [ <svi_routed_bytes_out> ] [ <svi_ucast_pkts_in> ] [ <svi_ucast_bytes_in> ] [ <svi_mcast_pkts_in> ] [ <svi_mcast_bytes_in> ] [ <svi_ucast_pkts_out> ] [ <svi_ucast_bytes_out> ] [ <svi_mcast_pkts_out> ] [ <svi_mcast_bytes_out> ] [ <svi_ipv4_ucast_pkts_in> ] [ <svi_ipv4_ucast_bytes_in> ] [ <svi_ipv4_ucast_pkts_out> ] [ <svi_ipv4_ucast_bytes_out> ] [ <svi_ipv4_mcast_pkts_in> ] [ <svi_ipv4_mcast_bytes_in> ] [ <svi_ipv4_mcast_pkts_out> ] [ <svi_ipv4_mcast_bytes_out> ] [ <svi_ipv6_ucast_pkts_in> ] [ <svi_ipv6_ucast_bytes_in> ] [ <svi_ipv6_ucast_pkts_out> ] [ <svi_ipv6_ucast_bytes_out> ] [ <svi_ipv6_mcast_pkts_in> ] [ <svi_ipv6_mcast_bytes_in> ] [ <svi_ipv6_mcast_pkts_out> ] [ <svi_ipv6_mcast_bytes_out> ] [ <svi_average_input_bits> ] [ <svi_average_input_packets> ] [ <svi_average_output_bits> ] [ <svi_average_output_packets> ] [ <svi_rate_in_mins> ] ] [ [ <svi_reliability> ] ] [ <switchport> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifid	Enter interface type and number in module/slot format
brief	(Optional) Show brief info of interface
quick	(Optional) Show info of interface skipping stats
__readonly__	(Optional) Read Only
TABLE_interface	(Optional) show interface
interface	(Optional) Interface index
desc	(Optional) Interface description
svi_if_index	(Optional) Interface
svi_admin_state	(Optional)
svi_rsn_desc	(Optional) Interface state reason detailed
svi_line_proto	(Optional)
svi_hw	(Optional) Hardware
svi_mac	(Optional) Address
svi_desc	(Optional) Interface Description
svi_ip_addr	(Optional) IP Address
svi_ip_mask	(Optional) IP address mask
svi_mtu	(Optional) MTU size in bytes
svi_bw	(Optional) Bandwidth in kilobits
svi_delay	(Optional) Throughput delay (tens of microseconds)
svi_tx_load	(Optional) Tx Load
svi_rx_load	(Optional) Rx Load
svi_carrier_delay_sec	(Optional) carrier delay value in seconds
svi_carrier_delay_msec	(Optional) carrier delay value in milli-seconds
svi_arp_type	(Optional) ARP type
svi_arp_timeout	(Optional) ARP timeout value
svi_time_last_cleared	(Optional) Time last cleared
TABLE_sec_vlan	(Optional) secondary vlans
sec_vlan	(Optional) vlan id
sec_vlan_type	(Optional) secondary vlan type
eth_load_interval1_rx	(Optional) interval 1 timer value in sec
eth_inrate1_bits	(Optional) interval 1 input rate bits/sec
eth_inrate1_pkts	(Optional) interval 1 input rate pkts/sec
eth_load_interval1_tx	(Optional) interval 1 timer value in sec
eth_outrate1_bits	(Optional) interval 1 output rate bits/sec
eth_outrate1_pkts	(Optional) interval 1 output rate pkts/sec
eth_load_interval2	(Optional) interval 2 timer value in sec
eth_inrate2_bits	(Optional) interval 2 input rate bits/sec
eth_inrate2_pkts	(Optional) interval 2 input rate pkts/sec
eth_outrate2_bits	(Optional) interval 2 output rate bits/sec
eth_outrate2_pkts	(Optional) interval 2 output rate pkts/sec
eth_load_interval3	(Optional) interval 3 timer value in sec
eth_inrate3_bits	(Optional) interval 3 input rate bits/sec
eth_inrate3_pkts	(Optional) interval 3 input rate pkts/sec
eth_outrate3_bits	(Optional) interval 3 output rate bits/sec
eth_outrate3_pkts	(Optional) interval 3 output rate pkts/sec
eth_l2_ucastpkts	(Optional) L2 switched ucast pkts
eth_l2_ucastbytes	(Optional) L2 switched ucast bytes
eth_l2_mcastpkts	(Optional) L2 switched mcast pkts
eth_l2_mcastbytes	(Optional) L2 switched mcast bytes
eth_l2_bcastpkts	(Optional) L2 switched bcast pkts
eth_l2_bcastbytes	(Optional) L2 switched bcast bytes
eth_l3in_ucastpkts	(Optional) IPv4 L3 in switched ucast pkts
eth_l3in_ucastbytes	(Optional) IPv4 L3 in switched ucast bytes
eth_l3in_mcastpkts	(Optional) IPv4 L3 in switched mcast pkts
eth_l3in_mcastbytes	(Optional) IPv4 L3 in switched mcast bytes
eth_l3in_bcastpkts	(Optional) L3 in switched bcast pkts
eth_l3in_bcastbytes	(Optional) L3 in switched bcast bytes
eth_l3out_ucastpkts	(Optional) IPv4 L3 out switched ucast pkts
eth_l3out_ucastbytes	(Optional) IPv4 L3 out switched ucast bytes
eth_l3out_mcastpkts	(Optional) IPv4 L3 out switched mcast pkts
eth_l3out_mcastbytes	(Optional) IPv4 L3 out switched mcast bytes
eth_l3out_bcastpkts	(Optional) L3 out switched bcast pkts
eth_l3out_bcastbytes	(Optional) L3 out switched bcast bytes
eth_l3in_routed_pkts	(Optional) L3 in routed pkts
eth_l3in_routed_bytes	(Optional) L3 in routed bytes
eth_l3out_routed_pkts	(Optional) L3 out routed pkts
eth_l3out_routed_bytes	(Optional) L3 out routed bytes
eth_l3avg1_inbytes	(Optional) Load interval 1 L3 average in switched bytes
eth_l3avg1_inpkts	(Optional) Load interval 1 L3 average in switched pkts
eth_l3avg1_outbytes	(Optional) Load interval 1 L3 average out switched bytes
eth_l3avg1_outpkts	(Optional) Load interval 1 L3 average out switched pkts
eth_l3avg2_inbytes	(Optional) Load interval 2 L3 average in switched bytes
eth_l3avg2_inpkts	(Optional) Load interval 2 L3 average in switched pkts
eth_l3avg2_outbytes	(Optional) Load interval 2 L3 average out switched bytes
eth_l3avg2_outpkts	(Optional) Load interval 2 L3 average out switched pkts
eth_l3avg3_inbytes	(Optional) Load interval 3 L3 average in switched bytes
eth_l3avg3_inpkts	(Optional) Load interval 3 L3 average in switched pkts
eth_l3avg3_outbytes	(Optional) Load interval 3 L3 average out switched bytes
eth_l3avg3_outpkts	(Optional) Load interval 3 L3 average out switched pkts
eth_inpkts	(Optional) Packets input
eth_inbytes	(Optional) Bytes input
eth_nobuf	(Optional) No buffer received
eth_inbcast	(Optional) Broadcasts
eth_inmcast	(Optional) Multicasts
eth_inucast	(Optional) Unicasts
eth_ingiants	(Optional) giants
eth_ipmcast	(Optional) IP multicast
eth_inhw_switched	(Optional) Input H/W Switched
eth_insw_switched	(Optional) Input S/W Switched
eth_runts	(Optional) runts
eth_storm_supp	(Optional) storm suppression
eth_throtles	(Optional) throttles
eth_inerr	(Optional) input errors
eth_crc	(Optional) CRC
eth_ecc	(Optional) ECC
eth_frame	(Optional) frame
eth_overrun	(Optional) overrun
eth_ignored	(Optional) ignored
eth_watchdog	(Optional) watchdog
eth_outbcast	(Optional) Broadcasts
eth_outmcast	(Optional) Multicasts
eth_outucast	(Optional) Unicasts
eth_outgiants	(Optional) giants
eth_inpause	(Optional) pause input
eth_dribble	(Optional) input packets with dribble condition
eth_in_ifdown_drops	(Optional) Input if-down drops
eth_bad_eth	(Optional) bad ether type drop
eth_bad_proto	(Optional) bad protocol drops
eth_outpkts	(Optional) packets output
eth_outbytes	(Optional) bytes output
eth_underrun	(Optional) underruns
eth_outhw_switched	(Optional) Out H/W Switched
eth_outsw_switched	(Optional) Out S/W Switched
eth_outerr	(Optional) output errors
eth_coll	(Optional) collisions
eth_resets	(Optional) interface resets
eth_babbles	(Optional) babbles
eth_latecoll	(Optional) late collision
eth_deferred	(Optional) deferred
eth_lostcarrier	(Optional) lost carrier
eth_nocarrier	(Optional) no carrier
eth_outpause	(Optional) PAUSE output
eth_buffail	(Optional) output buffer failures
eth_bufswapped	(Optional) output buffers swapped out
eth_arpdrops	(Optional) arp drops
eth_out_ifdown_drops	(Optional) Output if-down drops
eth_single_coll	(Optional) single collisions
eth_multi_coll	(Optional) multi collisions
eth_excess_coll	(Optional) excessive collisions
eth_jabbers	(Optional) jabbers
eth_shortframe	(Optional) short frames
eth_indiscard	(Optional) discards
eth_bad_encap	(Optional) bad encapsulation
eth_outcrc	(Optional) Output CRC
eth_symbol	(Optional) symbol errors
eth_out_drops	(Optional) output drops
eth_sqetest	(Optional) SQE test
eth_inb64	(Optional) input pkts between 0 and 64 bytes
eth_inb65_127	(Optional) input pkts between 65 and 127 bytes
eth_inb128_255	(Optional) input pkts between 128 and 255 bytes
eth_inb256_511	(Optional) input pkts between 256 and 511 bytes
eth_inb512_1023	(Optional) input pkts between 512 and 1023 bytes
eth_inb1024_1518	(Optional) input pkts between 1024 and 1518 bytes
eth_inb1519_1548	(Optional) input pkts between 1519 and 1548 bytes
eth_intrunk	(Optional) input trunk pkts
eth_outb64	(Optional) output pkts between 0 and 64 bytes
eth_outb65_127	(Optional) output pkts between 65 and 127 bytes
eth_outb128_255	(Optional) output pkts between 128 and 255 bytes
eth_outb256_511	(Optional) output pkts between 256 and 511 bytes
eth_outb512_1023	(Optional) output pkts between 512 and 1023 bytes
eth_outb1024_1518	(Optional) output pkts between 1024 and 1518 bytes
eth_outb1519_1548	(Optional) output pkts between 1519 and 1548 bytes
eth_outtrunk	(Optional) output trunk pkts
eth_bpdu_outlost	(Optional) BPDU output lost
eth_cos0_outlost	(Optional) output pkts
eth_cos1_outlost	(Optional) output pkts
eth_cos2_outlost	(Optional) output pkts
eth_cos3_outlost	(Optional) output pkts
eth_cos4_outlost	(Optional) output pkts
eth_cos5_outlost	(Optional) output pkts
eth_cos6_outlost	(Optional) output pkts
eth_cos7_outlost	(Optional) output pkts
eth_fcoe_in_pkts	(Optional) fcoe in pkts
eth_fcoe_in_octets	(Optional) fcoe in octets
eth_fcoe_out_pkts	(Optional) fcoe out pkts
eth_fcoe_out_octets	(Optional) fcoe out octets
eth_nfcoe_in_pkts	(Optional) nfcoe in pkts
eth_nfcoe_in_octets	(Optional) nfcoe in octets
eth_nfcoe_out_pkts	(Optional) nfcoe out pkts
eth_nfcoe_out_octets	(Optional) nfcoe out octets
eth_eee_atx_lpi_msec	(Optional) Tx Lpi usec
eth_eee_arcv_lpi_msec	(Optional) Rx Lpi usec
eth_eee_atx_lpi_transitions	(Optional) Tx Lpi requests
eth_eee_arcv_lpi_transitions	(Optional) Rx Lpi indications
eth_phy_ber_count	(Optional) Bit error rate counter
eth_phy_errblks_count	(Optional) Errored blocks counter
svi_reliability	(Optional) Reliability
switchport	(Optional) Switchport enabled

Command Mode

/exec

show interface

show interface <ifmgmt> [ __readonly__ TABLE_interface <interface> <state> [ <state_rsn_desc> ] [ <state_rsn> ] [ <eth_rsn_fac> ] [ <eth_rsn_code> ] [ <share_state> ] [ <eth_bundle> ] [ <eth_dce_mode> ] [ <vpc_status> ] [ <eth_hw_desc> ] [ <eth_hw_addr> ] [ <eth_bia_addr> ] [ <desc> ] [ <eth_ip_addr> ] [ <eth_ip_mask> ] [ <eth_ip_prefix> ] [ <eth_mtu> ] [ <eth_bw> ] [ <eth_encap_vlan> ] [ <eth_dly> ] [ <eth_reliability> ] [ <eth_txload> ] [ <eth_rxload> ] [ <eth_loopback> ] [ <eth_keepalive> ] [ <eth_duplex> ] [ <eth_speed> ] [ <eth_mode> ] [ <eth_ratemode> ] [ <eth_autoneg> ] [ <eth_beacon> ] [ <eth_media> ] [ <eth_in_flowctrl> ] [ <eth_out_flowctrl> ] [ <eth_mdix> ] [ <eth_swt_monitor> ] [ <eth_ethertype> ] [ <eth_members> ] [ <eth_clk_mode> ] [ <eth_arp_type> ] [ <eth_arp_timeout> ] [ <eth_last_in> ] [ <eth_last_out> ] [ <eth_out_hang> ] [ <eth_clear_counters> ] [ <eth_link_flapped> ] [ <eth_inq_size> ] [ <eth_inq_max> ] [ <eth_inq_drops> ] [ <eth_inq_flush> ] [ <eth_out_drop> ] [ <eth_q_strategy> ] [ <eth_outq_size> ] [ <eth_outq_max> ] [ <eth_reset_cntr> ] [ <mgmt_hw_desc> ] [ <mgmt_hw_addr> ] [ <mgmt_ip_addr> ] [ <mgmt_ip_mask> ] [ <mgmt_mtu> ] [ <mgmt_speed> ] [ <mgmt_duplex> ] [ <vdc_lvl_in_avg_bits> ] [ <vdc_lvl_in_avg_pkts> ] [ <vdc_lvl_out_avg_bits> ] [ <vdc_lvl_out_avg_pkts> ] [ <vdc_lvl_in_pkts> ] [ <vdc_lvl_in_ucast> ] [ <vdc_lvl_in_mcast> ] [ <vdc_lvl_in_bcast> ] [ <vdc_lvl_in_bytes> ] [ <vdc_lvl_in_bps> ] [ <vdc_lvl_in_pps> ] [ <vdc_lvl_out_pkts> ] [ <vdc_lvl_out_ucast> ] [ <vdc_lvl_out_mcast> ] [ <vdc_lvl_out_bcast> ] [ <vdc_lvl_out_bytes> ] [ <vdc_lvl_out_bps> ] [ <vdc_lvl_out_pps> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifmgmt	Enter interface type and number in module/slot format
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
state	(Optional) Interface state
state_rsn_desc	(Optional) Interface state reason detailed
state_rsn	(Optional) Interface state reason
eth_rsn_fac	(Optional) State reason facility
eth_rsn_code	(Optional) State reason code
share_state	(Optional) Interface ownership
eth_bundle	(Optional) Belongs to bundle
eth_dce_mode	(Optional) DCE mode description
vpc_status	(Optional) VPC status
eth_hw_desc	(Optional) HW description
eth_hw_addr	(Optional) HW address
eth_bia_addr	(Optional) bia address
desc	(Optional) Interface description
eth_ip_addr	(Optional) IP Address
eth_ip_mask	(Optional) IP address mask
eth_ip_prefix	(Optional) IP address prefix
eth_mtu	(Optional) MTU
eth_bw	(Optional) Bandwidth
eth_encap_vlan	(Optional) Encapsulation Vlan
eth_dly	(Optional) Delay
eth_reliability	(Optional) Reliability
eth_txload	(Optional) Tx load
eth_rxload	(Optional) Rx load
eth_loopback	(Optional) Loopback
eth_keepalive	(Optional) Keepalive
eth_duplex	(Optional) Duplex
eth_speed	(Optional) Speed
eth_mode	(Optional) Port mode
eth_ratemode	(Optional) Rate mode
eth_autoneg	(Optional) Autonegotiation
eth_beacon	(Optional) Beacon
eth_media	(Optional) Media type
eth_in_flowctrl	(Optional) Input flowcontrol
eth_out_flowctrl	(Optional) Output flowcontrol
eth_mdix	(Optional) Mdix
eth_swt_monitor	(Optional) Switchport Monitor
eth_ethertype	(Optional) EtherType
eth_members	(Optional) Members in this channel
eth_clk_mode	(Optional) Clock mode
eth_arp_type	(Optional) ARP type
eth_arp_timeout	(Optional) ARP timeout
eth_last_in	(Optional) Last input
eth_last_out	(Optional) Last output
eth_out_hang	(Optional) Last output hang
eth_clear_counters	(Optional) Last clearing of show interface counters
eth_link_flapped	(Optional) Last link flapped
eth_inq_size	(Optional) Input queue size
eth_inq_max	(Optional) Input queue max
eth_inq_drops	(Optional) Input queue drops
eth_inq_flush	(Optional) Input queue flushes
eth_out_drop	(Optional) Output drops
eth_q_strategy	(Optional) Queueing strategy
eth_outq_size	(Optional) Output queue size
eth_outq_max	(Optional) Output queue max
eth_reset_cntr	(Optional) Interface resets
mgmt_hw_desc	(Optional) HW description
mgmt_hw_addr	(Optional) HW address
mgmt_ip_addr	(Optional) IP address
mgmt_ip_mask	(Optional) IP address mask
mgmt_mtu	(Optional) MTU
mgmt_speed	(Optional) Speed
mgmt_duplex	(Optional) Duplex
vdc_lvl_in_avg_bits	(Optional) VDC level average input bits
vdc_lvl_in_avg_pkts	(Optional) VDC level average input packets
vdc_lvl_out_avg_bits	(Optional) VDC level average output bits
vdc_lvl_out_avg_pkts	(Optional) VDC level average output packets
vdc_lvl_in_pkts	(Optional) VDC level input packets
vdc_lvl_in_ucast	(Optional) VDC level input unicast packets
vdc_lvl_in_mcast	(Optional) VDC level input multicast packets
vdc_lvl_in_bcast	(Optional) VDC level input broadcast packets
vdc_lvl_in_bytes	(Optional) VDC level input bytes
vdc_lvl_in_bps	(Optional) VDC level input bytes per second
vdc_lvl_in_pps	(Optional) VDC level input packets per second
vdc_lvl_out_pkts	(Optional) VDC level output packets
vdc_lvl_out_ucast	(Optional) VDC level output unicast packets
vdc_lvl_out_mcast	(Optional) VDC level output multicast packets
vdc_lvl_out_bcast	(Optional) VDC level output broadcast packets
vdc_lvl_out_bytes	(Optional) VDC level output bytes
vdc_lvl_out_bps	(Optional) VDC level output bytes per second
vdc_lvl_out_pps	(Optional) VDC level output packets per second

Command Mode

/exec

show interface

show interface [ controller | quick ] [ __readonly__ TABLE_interface <interface> [ <state> ] [ <state_rsn_desc> ] [ <state_rsn> ] [ <eth_rsn_fac> ] [ <eth_rsn_code> ] [ <admin_state> ] [ <share_state> ] [ <parent_interface> ] [ <vpc_status> ] [ <eth_bundle> ] [ <eth_hw_desc> ] [ <eth_hw_addr> ] [ <eth_bia_addr> ] [ <desc> ] [ <eth_ip_addr> ] [ <eth_ip_mask> ] [ <eth_ip_prefix> ] [ <eth_mtu> ] + [ <eth_bw> ] [ <eth_dly> ] [ <eth_reliability> ] [ <eth_txload> ] [ <eth_rxload> ] [ <eth_encap_vlan> ] [ <medium> ] [ <eth_mode> ] [ <eth_duplex> ] [ <eth_speed> ] [ <eth_media> ] [ <eth_beacon> ] [ <eth_autoneg> ] [ <eth_in_flowctrl> ] [ <eth_out_flowctrl> ] [ <eth_mdix> ] [ <eth_ratemode> ] [ <eth_swt_monitor> ] [ <eth_ethertype> ] [ <eth_eee_state> ] [ <eth_members> ] [ <eth_link_flapped> ] [ <eth_clear_counters> ] [ <eth_reset_cntr> ] [ <eth_load_interval1> ] [ <eth_load_interval1_rx> ] [ <eth_inrate1_bits> ] [ <eth_inrate1_pkts> ] [ <eth_load_interval1_tx> ] [ <eth_outrate1_bits> ] [ <eth_outrate1_pkts> ] [ <eth_load_interval2> ] [ <eth_inrate1_summary_bits> ] [ <eth_inrate1_summary_pkts> ] [ <eth_outrate1_summary_bits> ] [ <eth_outrate1_summary_pkts> ] [ <eth_load_interval2_rx> ] [ <eth_inrate2_bits> ] [ <eth_inrate2_pkts> ] [ <eth_load_interval2_tx> ] [ <eth_outrate2_bits> ] [ <eth_outrate2_pkts> ] [ <eth_load_interval3> ] [ <eth_inrate2_summary_bits> ] [ <eth_inrate2_summary_pkts> ] [ <eth_outrate2_summary_bits> ] [ <eth_outrate2_summary_pkts> ] [ <eth_load_interval3_rx> ] [ <eth_inrate3_bits> ] [ <eth_inrate3_pkts> ] [ <eth_load_interval3_tx> ] [ <eth_outrate3_bits> ] [ <eth_outrate3_pkts> ] [ <eth_inrate3_summary_bits> ] [ <eth_inrate3_summary_pkts> ] [ <eth_outrate3_summary_bits> ] [ <eth_outrate3_summary_pkts> ] [ <eth_l2_ucastpkts> ] [ <eth_l2_ucastbytes> ] [ <eth_l2_mcastpkts> ] [ <eth_l2_mcastbytes> ] [ <eth_l2_bcastpkts> ] [ <eth_l2_bcastbytes> ] [ <eth_l3in_routed_pkts> ] [ <eth_l3in_routed_bytes> ] [ <eth_l3out_routed_pkts> ] [ <eth_l3out_routed_bytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_ucastbytes> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_mcastbytes> ] [ <eth_l3in_bcastpkts> ] [ <eth_l3in_bcastbytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_ucastbytes> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_mcastbytes> ] [ <eth_l3out_bcastpkts> ] [ <eth_l3out_bcastbytes> ] [ <eth_l3avg1_inbytes> ] [ <eth_l3avg1_inpkts> ] [ <eth_l3avg1_outbytes> ] [ <eth_l3avg1_outpkts> ] [ <eth_inucast> ] [ <eth_inmcast> ] [ <eth_inbcast> ] [ <eth_inpkts> ] [ <eth_inbytes> ] [ <eth_jumbo_inpkts> ] [ <eth_storm_supp> ] [ <eth_runts> ] [ <eth_giants> ] [ <eth_crc> ] [ <eth_nobuf> ] [ <eth_inerr> ] [ <eth_frame> ] [ <eth_overrun> ] [ <eth_underrun> ] [ <eth_ignored> ] [ <eth_watchdog> ] [ <eth_bad_eth> ] [ <eth_bad_proto> ] [ <eth_in_ifdown_drops> ] [ <eth_dribble> ] [ <eth_indiscard> ] [ <eth_inpause> ] [ <eth_outucast> ] [ <eth_outmcast> ] [ <eth_outbcast> ] [ <eth_outpkts> ] [ <eth_outbytes> ] [ <eth_jumbo_outpkts> ] [ <eth_outerr> ] [ <eth_coll> ] [ <eth_deferred> ] [ <eth_latecoll> ] [ <eth_lostcarrier> ] [ <eth_nocarrier> ] [ <eth_babbles> ] [ <eth_outdiscard> ] [ <eth_outpause> ] [ <mgmt_hw_desc> ] [ <mgmt_hw_addr> ] [ <mgmt_ip_addr> ] [ <mgmt_ip_mask> ] [ <mgmt_mtu> ] [ <mgmt_speed> ] [ <mgmt_duplex> ] [ <vdc_lvl_in_avg_bits> ] [ <vdc_lvl_in_avg_pkts> ] [ <vdc_lvl_out_avg_bits> ] [ <vdc_lvl_out_avg_pkts> ] [ <vdc_lvl_in_pkts> ] [ <vdc_lvl_in_ucast> ] [ <vdc_lvl_in_mcast> ] [ <vdc_lvl_in_bcast> ] [ <vdc_lvl_in_bytes> ] [ <vdc_lvl_in_bps> ] [ <vdc_lvl_in_pps> ] [ <vdc_lvl_out_pkts> ] [ <vdc_lvl_out_ucast> ] [ <vdc_lvl_out_mcast> ] [ <vdc_lvl_out_bcast> ] [ <vdc_lvl_out_bytes> ] [ <vdc_lvl_out_bps> ] [ <vdc_lvl_out_pps> ] [ <mgmt_in_pkts> ] [ <mgmt_in_bytes> ] [ <mgmt_in_mcast> ] [ <mgmt_in_compressed> ] [ <mgmt_in_errors> ] [ <mgmt_in_frame> ] [ <mgmt_in_overrun> ] [ <mgmt_in_fifo> ] [ <mgmt_out_pkts> ] [ <mgmt_out_bytes> ] [ <mgmt_out_underruns> ] [ <mgmt_out_errors> ] [ <mgmt_out_collisions> ] [ <mgmt_out_fifo> ] [ <mgmt_out_carrier> ] [ <mgmt_align_err> ] [ <mgmt_fcs_err> ] [ <mgmt_xmit_err> ] [ <mgmt_rcv_err> ] [ <mgmt_undersize> ] [ <mgmt_outdisc> ] [ <mgmt_single_col> ] [ <mgmt_multi_col> ] [ <mgmt_late_col> ] [ <mgmt_excess_col> ] [ <mgmt_carri_sen> ] [ <mgmt_runts> ] [ <mgmt_giants> ] [ <mgmt_sqetest_err> ] [ <mgmt_deferred_tx> ] [ <mgmt_inmactx_err> ] [ <mgmt_inmacrx_err> ] [ <mgmt_symbol_err> ] [ <loop_in_pkts> ] [ <loop_in_bytes> ] [ <loop_in_mcast> ] [ <loop_in_compressed> ] [ <loop_in_errors> ] [ <loop_in_frame> ] [ <loop_in_overrun> ] [ <loop_in_fifo> ] [ <loop_out_pkts> ] [ <loop_out_bytes> ] [ <loop_out_underruns> ] [ <loop_out_errors> ] [ <loop_out_collisions> ] [ <loop_out_fifo> ] [ <loop_out_carriers> ] <admin-state> { <tunnel-ipv4> | <tunnel-ipv6> } <mtu> <bandwidth> <encap-type> <keepalive-period> <keepalive-retries> { <src-ipv4> | <src-ipv6> } <src-intf> { <dest-ipv4> | <dest-ipv6> } <dest-hostname> <vrf_name> <wccp_header> <ttl_val> <tunnel_pmtud_age_time> <tunnel_pmtud_min_mtu> <tunnel_pmtud> <tunnel_pgm_mtu> <tunnel_rx_pkt_count> <tunnel_rx_byte_count> <tunnel_rx_rate> <tunnel_tx_pkt_count> <tunnel_tx_byte_count> <tunnel_tx_rate> <tunnel_clear_counter> [ <svi_if_index> ] [ <svi_admin_state> ] [ <svi_rsn_desc> ] [ <svi_line_proto> ] [ <svi_hw> ] [ <svi_mac> ] [ <svi_desc> ] [ <svi_ip_addr> ] [ <svi_ip_mask> ] [ <svi_mtu> ] [ <svi_bw> ] [ <svi_delay> ] [ <svi_tx_load> ] [ <svi_rx_load> ] [ <svi_carrier_delay_sec> ] [ <svi_carrier_delay_msec> ] [ <svi_arp_type> ] [ <svi_arp_timeout> ] [ <svi_time_last_cleared> ] { [ TABLE_sec_vlan ] [ <sec_vlan> ] [ <sec_vlan_type> ] } [ <svi_routed_pkts_in> ] [ <svi_routed_bytes_in> ] [ <svi_routed_pkts_out> ] [ <svi_routed_bytes_out> ] [ <svi_ucast_pkts_in> ] [ <svi_ucast_bytes_in> ] [ <svi_mcast_pkts_in> ] [ <svi_mcast_bytes_in> ] [ <svi_ucast_pkts_out> ] [ <svi_ucast_bytes_out> ] [ <svi_mcast_pkts_out> ] [ <svi_mcast_bytes_out> ] [ <svi_ipv4_ucast_pkts_in> ] [ <svi_ipv4_ucast_bytes_in> ] [ <svi_ipv4_ucast_pkts_out> ] [ <svi_ipv4_ucast_bytes_out> ] [ <svi_ipv4_mcast_pkts_in> ] [ <svi_ipv4_mcast_bytes_in> ] [ <svi_ipv4_mcast_pkts_out> ] [ <svi_ipv4_mcast_bytes_out> ] [ <svi_ipv6_ucast_pkts_in> ] [ <svi_ipv6_ucast_bytes_in> ] [ <svi_ipv6_ucast_pkts_out> ] [ <svi_ipv6_ucast_bytes_out> ] [ <svi_ipv6_mcast_pkts_in> ] [ <svi_ipv6_mcast_bytes_in> ] [ <svi_ipv6_mcast_pkts_out> ] [ <svi_ipv6_mcast_bytes_out> ] [ <svi_average_input_bits> ] [ <svi_average_input_packets> ] [ <svi_average_output_bits> ] [ <svi_average_output_packets> ] [ <svi_rate_in_mins> ] [ <svi_reliability> ] [ <overlay_addr> ] [ <overlay_addr_mask> ] [ <overlay_mtu> ] [ <overlay_bandwidth> ] [ <overlay_encap_str> ] [ <overlay_vrf> ] [ <overlay_src_addr> ] [ <overlay_dst_addr> ] [ <overlay_last_link_flap> ] [ <overlay_clear_counters> ] [ <overlay_load_interval> ] [ <overlay_rx_ucastpkts> ] [ <overlay_rx_ucastbytes> ] [ <overlay_rx_mcastpkts> ] [ <overlay_rx_mcastbytes> ] [ <overlay_rx_pkts> ] [ <overlay_rx_bytes> ] [ <overlay_rx_bcastpkts> ] [ <overlay_rx_bcastbytes> ] [ <overlay_rx_bitrate> ] [ <overlay_rx_pktrate> ] [ <overlay_tx_ucastpkts> ] [ <overlay_tx_ucastbytes> ] [ <overlay_tx_mcastpkts> ] [ <overlay_tx_mcastbytes> ] [ <overlay_tx_bcastpkts> ] [ <overlay_tx_bcastbytes> ] [ <overlay_tx_pkts> ] [ <overlay_tx_bytes> ] [ <overlay_tx_bitrate> ] [ <overlay_tx_pktrate> ] <switchport> ]

Syntax Description


show	Show running system information
interface	Show interface status and information
controller	(Optional) Show controller configured interfaces
quick	(Optional) Show info of interface skipping stats
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
state	(Optional) Interface state
state_rsn_desc	(Optional) Interface state reason detailed
state_rsn	(Optional) Interface state reason
switchport	(Optional) Switchport enabled
eth_rsn_fac	(Optional) State reason facility
eth_rsn_code	(Optional) State reason code
admin_state	(Optional) admin state
share_state	(Optional) Interface ownership
parent_interface	(Optional) parent interface
vpc_status	(Optional) VPC status
eth_bundle	(Optional) Belongs to bundle
eth_hw_desc	(Optional) HW description
eth_hw_addr	(Optional) HW address
eth_bia_addr	(Optional) bia address
desc	(Optional) Interface description
eth_ip_addr	(Optional) IP Address
eth_ip_mask	(Optional) IP address mask
eth_ip_prefix	(Optional) IP address prefix
eth_mtu	(Optional) MTU
eth_bw	(Optional) Bandwidth
eth_dly	(Optional) Delay
eth_reliability	(Optional) Reliability
eth_txload	(Optional) Tx load
eth_rxload	(Optional) Rx load
eth_encap_vlan	(Optional) Encapsulation Vlan
medium	(Optional) medium type
eth_mode	(Optional) Port mode
eth_duplex	(Optional) Duplex
eth_speed	(Optional) Speed
eth_media	(Optional) Media type
eth_beacon	(Optional) Beacon
eth_autoneg	(Optional) Autonegotiation
eth_in_flowctrl	(Optional) Input flowcontrol
eth_out_flowctrl	(Optional) Output flowcontrol
eth_mdix	(Optional) Mdix
eth_ratemode	(Optional) Rate mode
eth_swt_monitor	(Optional) Switchport Monitor
eth_ethertype	(Optional) EtherType
eth_eee_state	(Optional) EEE state
eth_members	(Optional) Members in this channel
eth_link_flapped	(Optional) Last link flapped
eth_clear_counters	(Optional) Last clearing of show interface counters
eth_reset_cntr	(Optional) Interface resets
eth_load_interval1	(Optional) interval 1 timer value in sec
eth_load_interval1_rx	(Optional) interval 1 timer value in sec
eth_inrate1_bits	(Optional) interval 1 input rate bits/sec
eth_inrate1_pkts	(Optional) interval 1 input rate pkts/sec
eth_load_interval1_tx	(Optional) interval 1 timer value in sec
eth_outrate1_bits	(Optional) interval 1 output rate bits/sec
eth_outrate1_pkts	(Optional) interval 1 output rate pkts/sec
eth_load_interval2	(Optional) interval 2 timer value in sec
eth_inrate1_summary_bits	(Optional) interval 1 input rate bit summary
eth_inrate1_summary_pkts	(Optional) interval 1 input rate pkt summary
eth_outrate1_summary_bits	(Optional) interval 1 output rate bit summary
eth_outrate1_summary_pkts	(Optional) interval 1 output rate pkt summary
eth_load_interval2_rx	(Optional) interval 2 timer value in sec
eth_inrate2_bits	(Optional) interval 2 input rate bits/sec
eth_inrate2_pkts	(Optional) interval 2 input rate pkts/sec
eth_load_interval2_tx	(Optional) interval 2 timer value in sec
eth_outrate2_bits	(Optional) interval 2 output rate bits/sec
eth_outrate2_pkts	(Optional) interval 2 output rate pkts/sec
eth_load_interval3	(Optional) interval 3 timer value in sec
eth_inrate2_summary_bits	(Optional) interval 2 input rate bit summary
eth_inrate2_summary_pkts	(Optional) interval 2 input rate pkt summary
eth_outrate2_summary_bits	(Optional) interval 2 output rate bit summary
eth_outrate2_summary_pkts	(Optional) interval 2 output rate pkt summary
eth_load_interval3_rx	(Optional) interval 3 timer value in sec
eth_inrate3_bits	(Optional) interval 3 input rate bits/sec
eth_inrate3_pkts	(Optional) interval 3 input rate pkts/sec
eth_load_interval3_tx	(Optional) interval 3 timer value in sec
eth_outrate3_bits	(Optional) interval 3 output rate bits/sec
eth_outrate3_pkts	(Optional) interval 3 output rate pkts/sec
eth_inrate3_summary_bits	(Optional) interval 3 input rate bit summary
eth_inrate3_summary_pkts	(Optional) interval 3 input rate pkt summary
eth_outrate3_summary_bits	(Optional) interval 3 output rate bit summary
eth_outrate3_summary_pkts	(Optional) interval 3 output rate pkt summary
eth_l2_ucastpkts	(Optional) L2 switched ucast pkts
eth_l2_ucastbytes	(Optional) L2 switched ucast bytes
eth_l2_mcastpkts	(Optional) L2 switched mcast pkts
eth_l2_mcastbytes	(Optional) L2 switched mcast bytes
eth_l2_bcastpkts	(Optional) L2 switched bcast pkts
eth_l2_bcastbytes	(Optional) L2 switched bcast bytes
eth_l3in_ucastpkts	(Optional) L3 in switched ucast pkts
eth_l3in_ucastbytes	(Optional) L3 in switched ucast bytes
eth_l3in_mcastpkts	(Optional) L3 in switched mcast pkts
eth_l3in_mcastbytes	(Optional) L3 in switched mcast bytes
eth_l3in_bcastpkts	(Optional) L3 in switched bcast pkts
eth_l3in_bcastbytes	(Optional) L3 in switched bcast bytes
eth_l3out_ucastpkts	(Optional) L3 out switched ucast pkts
eth_l3out_ucastbytes	(Optional) L3 out switched ucast bytes
eth_l3out_mcastpkts	(Optional) L3 out switched mcast pkts
eth_l3out_mcastbytes	(Optional) L3 out switched mcast bytes
eth_l3out_bcastpkts	(Optional) L3 out switched bcast pkts
eth_l3out_bcastbytes	(Optional) L3 out switched bcast bytes
eth_l3in_routed_pkts	(Optional) L3 in routed pkts
eth_l3in_routed_bytes	(Optional) L3 in routed bytes
eth_l3out_routed_pkts	(Optional) L3 out routed pkts
eth_l3out_routed_bytes	(Optional) L3 out routed bytes
eth_l3avg1_inbytes	(Optional) Load interval 1 L3 average in switched bytes
eth_l3avg1_inpkts	(Optional) Load interval 1 L3 average in switched pkts
eth_l3avg1_outbytes	(Optional) Load interval 1 L3 average out switched bytes
eth_l3avg1_outpkts	(Optional) Load interval 1 L3 average out switched pkts
eth_inucast	(Optional) Unicasts
eth_inmcast	(Optional) Multicasts
eth_inbcast	(Optional) Broadcasts
eth_inpkts	(Optional) Packets input
eth_inbytes	(Optional) Bytes input
eth_jumbo_inpkts	(Optional) Incoming jumbo pkts
eth_storm_supp	(Optional) storm suppression
eth_runts	(Optional) runts
eth_giants	(Optional) giants
eth_crc	(Optional) CRC
eth_nobuf	(Optional) No buffer received
eth_inerr	(Optional) input errors
eth_frame	(Optional) frame
eth_overrun	(Optional) overrun
eth_underrun	(Optional) underruns
eth_ignored	(Optional) ignored
eth_watchdog	(Optional) watchdog
eth_bad_eth	(Optional) bad ether type drop
eth_bad_proto	(Optional) bad protocol drops
eth_in_ifdown_drops	(Optional) Input if-down drops
eth_dribble	(Optional) input packets with dribble condition
eth_indiscard	(Optional) discards
eth_inpause	(Optional) pause input
eth_outucast	(Optional) Unicasts
eth_outmcast	(Optional) Multicasts
eth_outbcast	(Optional) Broadcasts
eth_outpkts	(Optional) packets output
eth_outbytes	(Optional) bytes output
eth_jumbo_outpkts	(Optional) Outgoing jumbo pkts
eth_outerr	(Optional) output errors
eth_coll	(Optional) collisions
eth_deferred	(Optional) deferred
eth_latecoll	(Optional) late collision
eth_lostcarrier	(Optional) lost carrier
eth_nocarrier	(Optional) no carrier
eth_babbles	(Optional) babbles
eth_outdiscard	(Optional) output discard
eth_outpause	(Optional) PAUSE output
mgmt_hw_desc	(Optional) HW description
mgmt_hw_addr	(Optional) HW address
mgmt_ip_addr	(Optional) IP address
mgmt_ip_mask	(Optional) IP address mask
mgmt_mtu	(Optional) MTU
mgmt_speed	(Optional) Speed
mgmt_duplex	(Optional) Duplex
vdc_lvl_in_avg_bits	(Optional) VDC level average input bits
vdc_lvl_in_avg_pkts	(Optional) VDC level average input packets
vdc_lvl_out_avg_bits	(Optional) VDC level average output bits
vdc_lvl_out_avg_pkts	(Optional) VDC level average output packets
vdc_lvl_in_pkts	(Optional) VDC level input packets
vdc_lvl_in_ucast	(Optional) VDC level input unicast packets
vdc_lvl_in_mcast	(Optional) VDC level input multicast packets
vdc_lvl_in_bcast	(Optional) VDC level input broadcast packets
vdc_lvl_in_bytes	(Optional) VDC level input bytes
vdc_lvl_in_bps	(Optional) VDC level input bytes per second
vdc_lvl_in_pps	(Optional) VDC level input packets per second
vdc_lvl_out_pkts	(Optional) VDC level output packets
vdc_lvl_out_ucast	(Optional) VDC level output unicast packets
vdc_lvl_out_mcast	(Optional) VDC level output multicast packets
vdc_lvl_out_bcast	(Optional) VDC level output broadcast packets
vdc_lvl_out_bytes	(Optional) VDC level output bytes
vdc_lvl_out_bps	(Optional) VDC level output bytes per second
vdc_lvl_out_pps	(Optional) VDC level output packets per second
mgmt_in_pkts	(Optional) Input packets
mgmt_in_bytes	(Optional) Input bytes
mgmt_in_mcast	(Optional) Input multicast frames
mgmt_in_compressed	(Optional) Input compressed
mgmt_in_errors	(Optional) Input errors
mgmt_in_frame	(Optional) Input frame errors
mgmt_in_overrun	(Optional) Input overrun
mgmt_in_fifo	(Optional) Input fifo
mgmt_out_pkts	(Optional) Output packets
mgmt_out_bytes	(Optional) Output bytes
mgmt_out_underruns	(Optional) Output overruns
mgmt_out_errors	(Optional) Output errors
mgmt_out_collisions	(Optional) Output collisions
mgmt_out_fifo	(Optional) Output fifo
mgmt_out_carrier	(Optional) Output carrier errors
mgmt_align_err	(Optional) Align error
mgmt_fcs_err	(Optional) FCS error
mgmt_xmit_err	(Optional) Transmit error
mgmt_rcv_err	(Optional) Receive error
mgmt_undersize	(Optional) Undersize
mgmt_outdisc	(Optional) Out discard
mgmt_single_col	(Optional) Single collision
mgmt_multi_col	(Optional) Multiple collision
mgmt_late_col	(Optional) Late collision
mgmt_excess_col	(Optional) Excess collision
mgmt_carri_sen	(Optional) Carrier sense
mgmt_runts	(Optional) Runts
mgmt_giants	(Optional) Giants
mgmt_sqetest_err	(Optional) SQETest error
mgmt_deferred_tx	(Optional) Deferred tx
mgmt_inmactx_err	(Optional) In MAC tx
mgmt_inmacrx_err	(Optional) In MAC rx
mgmt_symbol_err	(Optional) Symbol error
loop_in_pkts	(Optional) Input packets
loop_in_bytes	(Optional) Input bytes
loop_in_mcast	(Optional) Input multicast
loop_in_compressed	(Optional) Input compressed
loop_in_errors	(Optional) Input errors
loop_in_frame	(Optional) Input frame errors
loop_in_overrun	(Optional) Input overrun
loop_in_fifo	(Optional) Input fifo
loop_out_pkts	(Optional) Output packets
loop_out_bytes	(Optional) Output bytes
loop_out_underruns	(Optional) Output underruns
loop_out_errors	(Optional) Output errors
loop_out_collisions	(Optional) Output collisions
loop_out_fifo	(Optional) Output fifo
loop_out_carriers	(Optional) Output carrier errors
admin-state	(Optional)
tunnel-ipv4	(Optional) interface IPv4 address
mtu	(Optional) interface Maximum Transmission Unit
bandwidth	(Optional) interface Bandwidth in kilobits
encap-type	(Optional)
keepalive-period	(Optional) keealive period
keepalive-retries	(Optional) number of retries
src-ipv4	(Optional) tunnel source IPv4 address
src-intf	(Optional) tunnel source interface
dest-ipv4	(Optional) tunnel destination IPv4 address
dest-hostname	(Optional) tunnel destination hostname
vrf_name	(Optional) transport VRF name
wccp_header	(Optional) wccp header
ttl_val	(Optional) tunnel time to live value
tunnel_pmtud_age_time	(Optional) tunnel path MTU discovery age time
tunnel_pmtud_min_mtu	(Optional) tunnel path MTU discovery min mtu
tunnel_pmtud	(Optional) tunnel path MTU discovered
tunnel_pgm_mtu	(Optional) tunnel actual programmed MTU
tunnel_rx_pkt_count	(Optional) total number of packets received
tunnel_rx_byte_count	(Optional) total number of bytes received
tunnel_rx_rate	(Optional) packets input rate per 5 minutes
tunnel_tx_pkt_count	(Optional) total number of packets transmitted
tunnel_tx_byte_count	(Optional) total number of bytes transmitted
tunnel_tx_rate	(Optional) packets transmitted per 5 minutes
tunnel_clear_counter	(Optional) Last clearing of show interface counters
svi_if_index	(Optional) Interface
svi_admin_state	(Optional)
svi_rsn_desc	(Optional) Interface state reason detailed
svi_line_proto	(Optional)
svi_hw	(Optional) Hardware
svi_mac	(Optional) Address
svi_desc	(Optional) Interface Description
svi_ip_addr	(Optional) IP Address
svi_ip_mask	(Optional) IP address mask
svi_mtu	(Optional) MTU size in bytes
svi_bw	(Optional) Bandwidth in kilobits
svi_delay	(Optional) Throughput delay (tens of microseconds)
svi_tx_load	(Optional) Tx Load
svi_rx_load	(Optional) Rx Load
svi_carrier_delay_sec	(Optional) carrier delay value in seconds
svi_carrier_delay_msec	(Optional) carrier delay value in milli-seconds
svi_arp_type	(Optional) ARP type
svi_arp_timeout	(Optional) ARP timeout value
svi_time_last_cleared	(Optional) Time last cleared
TABLE_sec_vlan	(Optional) secondary vlans
sec_vlan	(Optional) vlan id
sec_vlan_type	(Optional) secondary vlan type
svi_reliability	(Optional) Reliability
overlay_addr	(Optional) Overlay address
overlay_addr_mask	(Optional) Overlay address mask
overlay_mtu	(Optional) MTU
overlay_bandwidth	(Optional) Bandwidth
overlay_encap_str	(Optional) Encap type
overlay_vrf	(Optional) VRF
overlay_src_addr	(Optional) Source address
overlay_dst_addr	(Optional) Destination address
overlay_last_link_flap	(Optional) Last link flap
overlay_clear_counters	(Optional) Last clearing of show interface counters
overlay_load_interval	(Optional) Load interval
overlay_rx_ucastpkts	(Optional) Received ucast pkts
overlay_rx_ucastbytes	(Optional) Received ucast bytes
overlay_rx_mcastpkts	(Optional) Received mcast pkts
overlay_rx_mcastbytes	(Optional) Received mcast bytes
overlay_rx_bcastpkts	(Optional) Received bcast pkts
overlay_rx_bcastbytes	(Optional) Received bcast bytes
overlay_rx_pkts	(Optional) Total received pkts
overlay_rx_bytes	(Optional) Total received bytes
overlay_rx_bitrate	(Optional) Receive bit rate
overlay_rx_pktrate	(Optional) Receive pkt rate
overlay_tx_ucastpkts	(Optional) Trasnmitted ucast pkts
overlay_tx_ucastbytes	(Optional) Trasnmitted ucast bytes
overlay_tx_mcastpkts	(Optional) Trasnmitted mcast pkts
overlay_tx_mcastbytes	(Optional) Trasnmitted mcast bytes
overlay_tx_bcastpkts	(Optional) Trasnmitted bcast pkts
overlay_tx_bcastbytes	(Optional) Trasnmitted bcast bytes
overlay_tx_pkts	(Optional) Total transmitted pkts
overlay_tx_bytes	(Optional) Total transmitted bytes
overlay_tx_bitrate	(Optional) Transmit bit rate
overlay_tx_pktrate	(Optional) Transmit pkt rate

Command Mode

/exec

show interface

show interface <ifloop> [ __readonly__ TABLE_interface <interface> [ <state> ] [ <admin_state> ] [ <share_state> ] [ <state_rsn> ] [ <state_rsn_desc> ] [ <desc> ] [ <eth_bundle> ] [ <mgmt_sfp> ] [ <mgmt_type> ] [ <eth_eee_state> ] [ <eth_dce_mode> ] [ <vpc_status> ] [ <eth_rsn_fac> ] [ <eth_rsn_code> ] [ <eth_hw_desc> ] [ <eth_hw_addr> ] [ <eth_bia_addr> ] [ <eth_ip_addr> ] [ <eth_ip_mask> ] [ <eth_ip_prefix> ] [ <eth_mtu> ] [ <eth_bw> ] [ <eth_encap_vlan> ] [ <eth_dly> ] [ <eth_reliability> ] [ <eth_txload> ] [ <eth_rxload> ] [ <eth_loopback> ] [ <eth_keepalive> ] [ <eth_duplex> ] [ <eth_speed> ] [ <eth_mode> ] [ <eth_ratemode> ] [ <eth_autoneg> ] [ <eth_beacon> ] [ <eth_media> ] [ <eth_in_flowctrl> ] [ <eth_out_flowctrl> ] [ <eth_mdix> ] [ <eth_swt_monitor> ] [ <eth_ethertype> ] [ <eth_members> ] [ <eth_clk_mode> ] [ <eth_arp_type> ] [ <eth_arp_timeout> ] [ <eth_last_in> ] [ <eth_last_out> ] [ <eth_out_hang> ] [ <eth_clear_counters> ] [ <eth_link_flapped> ] [ <eth_inq_size> ] [ <eth_inq_max> ] [ <eth_inq_drops> ] [ <eth_inq_flush> ] [ <eth_out_drop> ] [ <eth_q_strategy> ] [ <eth_outq_size> ] [ <eth_outq_max> ] [ <eth_reset_cntr> ] [ <loop_in_pkts> ] [ <loop_in_bytes> ] [ <loop_in_mcast> ] [ <loop_in_compressed> ] [ <loop_in_errors> ] [ <loop_in_frame> ] [ <loop_in_overrun> ] [ <loop_in_fifo> ] [ <loop_out_pkts> ] [ <loop_out_bytes> ] [ <loop_out_underruns> ] [ <loop_out_errors> ] [ <loop_out_collisions> ] [ <loop_out_fifo> ] [ <loop_out_carriers> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifloop	Enter interface type and number in module/slot format
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
state	(Optional) Interface state
admin_state	(Optional) Interface admin state
share_state	(Optional) Interface ownership
state_rsn	(Optional) Interface state reason
state_rsn_desc	(Optional) Interface state reason detailed
desc	(Optional) Interface description
mgmt_sfp	(Optional) mgmt sfp
mgmt_type	(Optional) mgmt type
eth_bundle	(Optional) Belongs to bundle
eth_eee_state	(Optional) EEE state
eth_dce_mode	(Optional) DCE mode description
vpc_status	(Optional) VPC status
eth_rsn_fac	(Optional) State reason facility
eth_rsn_code	(Optional) State reason code
eth_hw_desc	(Optional) HW description
eth_hw_addr	(Optional) HW address
eth_bia_addr	(Optional) bia address
eth_ip_addr	(Optional) IP Address
eth_ip_mask	(Optional) IP address mask
eth_ip_prefix	(Optional) IP Prefix
eth_mtu	(Optional) MTU
eth_bw	(Optional) Bandwidth
eth_encap_vlan	(Optional) Encapsulation Vlan
eth_dly	(Optional) Delay
eth_reliability	(Optional) Reliability
eth_txload	(Optional) Tx load
eth_rxload	(Optional) Rx load
eth_loopback	(Optional) Loopback
eth_keepalive	(Optional) Keepalive
eth_duplex	(Optional) Duplex
eth_speed	(Optional) Speed
eth_mode	(Optional) Port mode
eth_ratemode	(Optional) Rate mode
eth_autoneg	(Optional) Autonegotiation
eth_beacon	(Optional) Beacon
eth_media	(Optional) Media type
eth_in_flowctrl	(Optional) Input flowcontrol
eth_out_flowctrl	(Optional) Output flowcontrol
eth_mdix	(Optional) Mdix
eth_swt_monitor	(Optional) Switchport Monitor
eth_ethertype	(Optional) EtherType
eth_members	(Optional) Members in this channel
eth_clk_mode	(Optional) Clock mode
eth_arp_type	(Optional) ARP type
eth_arp_timeout	(Optional) ARP timeout
eth_last_in	(Optional) Last input
eth_last_out	(Optional) Last output
eth_out_hang	(Optional) Last output hang
eth_clear_counters	(Optional) Last clearing of show interface counters
eth_link_flapped	(Optional) Last link flapped
eth_inq_size	(Optional) Input queue size
eth_inq_max	(Optional) Input queue max
eth_inq_drops	(Optional) Input queue drops
eth_inq_flush	(Optional) Input queue flushes
eth_out_drop	(Optional) Output drops
eth_q_strategy	(Optional) Queueing strategy
eth_outq_size	(Optional) Output queue size
eth_outq_max	(Optional) Output queue max
eth_reset_cntr	(Optional) Interface resets
loop_in_pkts	(Optional) Input packets
loop_in_bytes	(Optional) Input bytes
loop_in_mcast	(Optional) Input multicast
loop_in_compressed	(Optional) Input compressed
loop_in_errors	(Optional) Input errors
loop_in_frame	(Optional) Input frame errors
loop_in_overrun	(Optional) Input overrun
loop_in_fifo	(Optional) Input fifo
loop_out_pkts	(Optional) Output packets
loop_out_bytes	(Optional) Output bytes
loop_out_underruns	(Optional) Output underruns
loop_out_errors	(Optional) Output errors
loop_out_collisions	(Optional) Output collisions
loop_out_fifo	(Optional) Output fifo
loop_out_carriers	(Optional) Output carrier errors

Command Mode

/exec

show interface

show interface <ifeth> [ quick ] [ __readonly__ TABLE_interface <interface> <state> [ <state_rsn_desc> ] [ <state_rsn> ] [ <eth_rsn_fac> ] [ <eth_rsn_code> ] [ <admin_state> ] [ <share_state> ] [ <parent_interface> ] [ <vpc_status> ] [ <eth_bundle> ] [ <eth_hw_desc> ] [ <eth_hw_addr> ] [ <eth_bia_addr> ] [ <desc> ] [ <eth_ip_addr> ] [ <eth_ip_mask> ] [ <eth_ip_prefix> ] [ <eth_mtu> ] + [ <eth_bw> ] [ <eth_dly> ] [ <eth_reliability> ] [ <eth_txload> ] [ <eth_rxload> ] [ <eth_encap_vlan> ] [ <medium> ] [ <eth_mode> ] [ <eth_duplex> ] [ <eth_speed> ] [ <eth_media> ] [ <eth_beacon> ] [ <eth_autoneg> ] [ <eth_in_flowctrl> ] [ <eth_out_flowctrl> ] [ <eth_mdix> ] [ <eth_ratemode> ] [ <eth_swt_monitor> ] [ <eth_ethertype> ] [ <eth_eee_state> ] [ <eth_members> ] [ <eth_link_flapped> ] [ <eth_clear_counters> ] [ <eth_reset_cntr> ] [ <eth_load_interval1> ] [ <eth_load_interval1_rx> ] [ <eth_inrate1_bits> ] [ <eth_inrate1_pkts> ] [ <eth_load_interval1_tx> ] [ <eth_outrate1_bits> ] [ <eth_outrate1_pkts> ] [ <eth_load_interval2> ] [ <eth_inrate1_summary_bits> ] [ <eth_inrate1_summary_pkts> ] [ <eth_outrate1_summary_bits> ] [ <eth_outrate1_summary_pkts> ] [ <eth_load_interval2_rx> ] [ <eth_inrate2_bits> ] [ <eth_inrate2_pkts> ] [ <eth_load_interval2_tx> ] [ <eth_outrate2_bits> ] [ <eth_outrate2_pkts> ] [ <eth_load_interval3> ] [ <eth_inrate2_summary_bits> ] [ <eth_inrate2_summary_pkts> ] [ <eth_outrate2_summary_bits> ] [ <eth_outrate2_summary_pkts> ] [ <eth_load_interval3_rx> ] [ <eth_inrate3_bits> ] [ <eth_inrate3_pkts> ] [ <eth_load_interval3_tx> ] [ <eth_outrate3_bits> ] [ <eth_outrate3_pkts> ] [ <eth_inrate3_summary_bits> ] [ <eth_inrate3_summary_pkts> ] [ <eth_outrate3_summary_bits> ] [ <eth_outrate3_summary_pkts> ] [ <eth_l2_ucastpkts> ] [ <eth_l2_ucastbytes> ] [ <eth_l2_mcastpkts> ] [ <eth_l2_mcastbytes> ] [ <eth_l2_bcastpkts> ] [ <eth_l2_bcastbytes> ] [ <eth_l3in_routed_pkts> ] [ <eth_l3in_routed_bytes> ] [ <eth_l3out_routed_pkts> ] [ <eth_l3out_routed_bytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_ucastbytes> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_mcastbytes> ] [ <eth_l3in_bcastpkts> ] [ <eth_l3in_bcastbytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_ucastbytes> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_mcastbytes> ] [ <eth_l3out_bcastpkts> ] [ <eth_l3out_bcastbytes> ] [ <eth_l3avg1_inbytes> ] [ <eth_l3avg1_inpkts> ] [ <eth_l3avg1_outbytes> ] [ <eth_l3avg1_outpkts> ] [ <eth_inucast> ] [ <eth_inmcast> ] [ <eth_inbcast> ] [ <eth_inpkts> ] [ <eth_inbytes> ] [ <eth_jumbo_inpkts> ] [ <eth_storm_supp> ] [ <eth_runts> ] [ <eth_giants> ] [ <eth_crc> ] [ <eth_nobuf> ] [ <eth_inerr> ] [ <eth_frame> ] [ <eth_overrun> ] [ <eth_underrun> ] [ <eth_ignored> ] [ <eth_watchdog> ] [ <eth_bad_eth> ] [ <eth_bad_proto> ] [ <eth_in_ifdown_drops> ] [ <eth_dribble> ] [ <eth_indiscard> ] [ <eth_inpause> ] [ <eth_outucast> ] [ <eth_outmcast> ] [ <eth_outbcast> ] [ <eth_outpkts> ] [ <eth_outbytes> ] [ <eth_jumbo_outpkts> ] [ <eth_outerr> ] [ <eth_coll> ] [ <eth_deferred> ] [ <eth_latecoll> ] [ <eth_lostcarrier> ] [ <eth_nocarrier> ] [ <eth_babbles> ] [ <eth_outdiscard> ] [ <eth_outpause> ] [ <switchport> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifeth	Enter interface type and number in module/slot format
quick	(Optional) Show info of interface skipping stats
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
state	(Optional) Interface state
state_rsn_desc	(Optional) Interface state reason detailed
state_rsn	(Optional) Interface state reason
eth_rsn_fac	(Optional) State reason facility
eth_rsn_code	(Optional) State reason code
admin_state	(Optional) admin state
share_state	(Optional) Interface ownership
parent_interface	(Optional) parent interface
vpc_status	(Optional) VPC status
eth_bundle	(Optional) Belongs to bundle
eth_hw_desc	(Optional) HW description
eth_hw_addr	(Optional) HW address
eth_bia_addr	(Optional) bia address
desc	(Optional) Interface description
eth_ip_addr	(Optional) IP Address
eth_ip_mask	(Optional) IP address mask
eth_ip_prefix	(Optional) IP address prefix
eth_mtu	(Optional) MTU
eth_bw	(Optional) Bandwidth
eth_dly	(Optional) Delay
eth_reliability	(Optional) Reliability
eth_txload	(Optional) Tx load
eth_rxload	(Optional) Rx load
eth_encap_vlan	(Optional) Encapsulation Vlan
medium	(Optional) medium type
eth_mode	(Optional) Port mode
eth_duplex	(Optional) Duplex
eth_speed	(Optional) Speed
eth_media	(Optional) Media type
eth_beacon	(Optional) Beacon
eth_autoneg	(Optional) Autonegotiation
eth_in_flowctrl	(Optional) Input flowcontrol
eth_out_flowctrl	(Optional) Output flowcontrol
eth_mdix	(Optional) Mdix
eth_ratemode	(Optional) Rate mode
eth_swt_monitor	(Optional) Switchport Monitor
eth_ethertype	(Optional) EtherType
eth_eee_state	(Optional) EEE state
eth_members	(Optional) Members in this channel
eth_link_flapped	(Optional) Last link flapped
eth_clear_counters	(Optional) Last clearing of show interface counters
eth_reset_cntr	(Optional) Interface resets
eth_load_interval1	(Optional) interval 1 timer value in sec
eth_load_interval1_rx	(Optional) interval 1 timer value in sec
eth_inrate1_bits	(Optional) interval 1 input rate bits/sec
eth_inrate1_pkts	(Optional) interval 1 input rate pkts/sec
eth_load_interval1_tx	(Optional) interval 1 timer value in sec
eth_outrate1_bits	(Optional) interval 1 output rate bits/sec
eth_outrate1_pkts	(Optional) interval 1 output rate pkts/sec
eth_load_interval2	(Optional) interval 2 timer value in sec
eth_inrate1_summary_bits	(Optional) interval 1 input rate bit summary
eth_inrate1_summary_pkts	(Optional) interval 1 input rate pkt summary
eth_outrate1_summary_bits	(Optional) interval 1 output rate bit summary
eth_outrate1_summary_pkts	(Optional) interval 1 output rate pkt summary
eth_load_interval2_rx	(Optional) interval 2 timer value in sec
eth_inrate2_bits	(Optional) interval 2 input rate bits/sec
eth_inrate2_pkts	(Optional) interval 2 input rate pkts/sec
eth_load_interval2_tx	(Optional) interval 2 timer value in sec
eth_outrate2_bits	(Optional) interval 2 output rate bits/sec
eth_outrate2_pkts	(Optional) interval 2 output rate pkts/sec
eth_load_interval3	(Optional) interval 3 timer value in sec
eth_inrate2_summary_bits	(Optional) interval 2 input rate bit summary
eth_inrate2_summary_pkts	(Optional) interval 2 input rate pkt summary
eth_outrate2_summary_bits	(Optional) interval 2 output rate bit summary
eth_outrate2_summary_pkts	(Optional) interval 2 output rate pkt summary
eth_load_interval3_rx	(Optional) interval 3 timer value in sec
eth_inrate3_bits	(Optional) interval 3 input rate bits/sec
eth_inrate3_pkts	(Optional) interval 3 input rate pkts/sec
eth_load_interval3_tx	(Optional) interval 3 timer value in sec
eth_outrate3_bits	(Optional) interval 3 output rate bits/sec
eth_outrate3_pkts	(Optional) interval 3 output rate pkts/sec
eth_inrate3_summary_bits	(Optional) interval 3 input rate bit summary
eth_inrate3_summary_pkts	(Optional) interval 3 input rate pkt summary
eth_outrate3_summary_bits	(Optional) interval 3 output rate bit summary
eth_outrate3_summary_pkts	(Optional) interval 3 output rate pkt summary
eth_l2_ucastpkts	(Optional) L2 switched ucast pkts
eth_l2_ucastbytes	(Optional) L2 switched ucast bytes
eth_l2_mcastpkts	(Optional) L2 switched mcast pkts
eth_l2_mcastbytes	(Optional) L2 switched mcast bytes
eth_l2_bcastpkts	(Optional) L2 switched bcast pkts
eth_l2_bcastbytes	(Optional) L2 switched bcast bytes
eth_l3in_ucastpkts	(Optional) L3 in switched ucast pkts
eth_l3in_ucastbytes	(Optional) L3 in switched ucast bytes
eth_l3in_mcastpkts	(Optional) L3 in switched mcast pkts
eth_l3in_mcastbytes	(Optional) L3 in switched mcast bytes
eth_l3in_bcastpkts	(Optional) L3 in switched bcast pkts
eth_l3in_bcastbytes	(Optional) L3 in switched bcast bytes
eth_l3out_ucastpkts	(Optional) L3 out switched ucast pkts
eth_l3out_ucastbytes	(Optional) L3 out switched ucast bytes
eth_l3out_mcastpkts	(Optional) L3 out switched mcast pkts
eth_l3out_mcastbytes	(Optional) L3 out switched mcast bytes
eth_l3out_bcastpkts	(Optional) L3 out switched bcast pkts
eth_l3out_bcastbytes	(Optional) L3 out switched bcast bytes
eth_l3in_routed_pkts	(Optional) L3 in routed pkts
eth_l3in_routed_bytes	(Optional) L3 in routed bytes
eth_l3out_routed_pkts	(Optional) L3 out routed pkts
eth_l3out_routed_bytes	(Optional) L3 out routed bytes
eth_l3avg1_inbytes	(Optional) Load interval 1 L3 average in switched bytes
eth_l3avg1_inpkts	(Optional) Load interval 1 L3 average in switched pkts
eth_l3avg1_outbytes	(Optional) Load interval 1 L3 average out switched bytes
eth_l3avg1_outpkts	(Optional) Load interval 1 L3 average out switched pkts
eth_inucast	(Optional) Unicasts
eth_inmcast	(Optional) Multicasts
eth_inbcast	(Optional) Broadcasts
eth_inpkts	(Optional) Packets input
eth_inbytes	(Optional) Bytes input
eth_jumbo_inpkts	(Optional) Incoming jumbo pkts
eth_storm_supp	(Optional) storm suppression
eth_runts	(Optional) runts
eth_giants	(Optional) giants
eth_crc	(Optional) CRC
eth_nobuf	(Optional) No buffer received
eth_inerr	(Optional) input errors
eth_frame	(Optional) frame
eth_overrun	(Optional) overrun
eth_underrun	(Optional) underruns
eth_ignored	(Optional) ignored
eth_watchdog	(Optional) watchdog
eth_bad_eth	(Optional) bad ether type drop
eth_bad_proto	(Optional) bad protocol drops
eth_in_ifdown_drops	(Optional) Input if-down drops
eth_dribble	(Optional) input packets with dribble condition
eth_indiscard	(Optional) discards
eth_inpause	(Optional) pause input
eth_outucast	(Optional) Unicasts
eth_outmcast	(Optional) Multicasts
eth_outbcast	(Optional) Broadcasts
eth_outpkts	(Optional) packets output
eth_outbytes	(Optional) bytes output
eth_jumbo_outpkts	(Optional) Outgoing jumbo pkts
eth_outerr	(Optional) output errors
eth_coll	(Optional) collisions
eth_deferred	(Optional) deferred
eth_latecoll	(Optional) late collision
eth_lostcarrier	(Optional) lost carrier
eth_nocarrier	(Optional) no carrier
eth_babbles	(Optional) babbles
eth_outdiscard	(Optional) output discard
eth_outpause	(Optional) PAUSE output
switchport	(Optional) Switchport enabled

Command Mode

/exec

show interface

show interface <ifrange> [ __readonly__ TABLE_interface <interface> <state> <state_rsn> <state_rsn_desc> <desc> [ <overlay_addr> ] [ <overlay_addr_mask> ] [ <overlay_mtu> ] [ <overlay_bandwidth> ] [ <overlay_encap_str> ] [ <overlay_vrf> ] [ <overlay_src_addr> ] [ <overlay_dst_addr> ] [ <overlay_last_link_flap> ] [ <overlay_clear_counters> ] [ <overlay_load_interval> ] [ <overlay_rx_ucastpkts> ] [ <overlay_rx_ucastbytes> ] [ <overlay_rx_mcastpkts> ] [ <overlay_rx_mcastbytes> ] [ <overlay_rx_pkts> ] [ <overlay_rx_bytes> ] [ <overlay_rx_bcastpkts> ] [ <overlay_rx_bcastbytes> ] [ <overlay_rx_bitrate> ] [ <overlay_rx_pktrate> ] [ <overlay_tx_ucastpkts> ] [ <overlay_tx_ucastbytes> ] [ <overlay_tx_mcastpkts> ] [ <overlay_tx_mcastbytes> ] [ <overlay_tx_bcastpkts> ] [ <overlay_tx_bcastbytes> ] [ <overlay_tx_pkts> ] [ <overlay_tx_bytes> ] [ <overlay_tx_bitrate> ] [ <overlay_tx_pktrate> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifrange	Enter interface type and number
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
state	(Optional) Interface state
state_rsn	(Optional) Interface state reason
state_rsn_desc	(Optional) Interface state reason detailed
desc	(Optional) Interface description
overlay_addr	(Optional) Overlay address
overlay_addr_mask	(Optional) Overlay address mask
overlay_mtu	(Optional) MTU
overlay_bandwidth	(Optional) Bandwidth
overlay_encap_str	(Optional) Encap type
overlay_vrf	(Optional) VRF
overlay_src_addr	(Optional) Source address
overlay_dst_addr	(Optional) Destination address
overlay_last_link_flap	(Optional) Last link flap
overlay_clear_counters	(Optional) Last clearing of show interface counters
overlay_load_interval	(Optional) Load interval
overlay_rx_ucastpkts	(Optional) Received ucast pkts
overlay_rx_ucastbytes	(Optional) Received ucast bytes
overlay_rx_mcastpkts	(Optional) Received mcast pkts
overlay_rx_mcastbytes	(Optional) Received mcast bytes
overlay_rx_bcastpkts	(Optional) Received bcast pkts
overlay_rx_bcastbytes	(Optional) Received bcast bytes
overlay_rx_pkts	(Optional) Total received pkts
overlay_rx_bytes	(Optional) Total received bytes
overlay_rx_bitrate	(Optional) Receive bit rate
overlay_rx_pktrate	(Optional) Receive pkt rate
overlay_tx_ucastpkts	(Optional) Trasnmitted ucast pkts
overlay_tx_ucastbytes	(Optional) Trasnmitted ucast bytes
overlay_tx_mcastpkts	(Optional) Trasnmitted mcast pkts
overlay_tx_mcastbytes	(Optional) Trasnmitted mcast bytes
overlay_tx_bcastpkts	(Optional) Trasnmitted bcast pkts
overlay_tx_bcastbytes	(Optional) Trasnmitted bcast bytes
overlay_tx_pkts	(Optional) Total transmitted pkts
overlay_tx_bytes	(Optional) Total transmitted bytes
overlay_tx_bitrate	(Optional) Transmit bit rate
overlay_tx_pktrate	(Optional) Transmit pkt rate

Command Mode

/exec

show interface

show interface <ifrange> [ __readonly__ TABLE_interface <interface> <state> [ <state_rsn_desc> ] [ <state_rsn> ] [ <admin_state> ] [ <eth_rsn_fac> ] [ <eth_rsn_code> ] [ <share_state> ] [ <vpc_status> ] [ <eth_bundle> ] [ <eth_hw_desc> ] [ <eth_hw_addr> ] [ <eth_bia_addr> ] [ <desc> ] [ <eth_ip_addr> ] [ <eth_ip_mask> ] [ <eth_mtu> ] [ <eth_bw> ] [ <eth_dly> ] [ <eth_reliability> ] [ <eth_txload> ] [ <eth_rxload> ] [ <eth_encap_vlan> ] [ <eth_mode> ] [ <eth_duplex> ] [ <eth_speed> ] [ <eth_media> ] [ <eth_beacon> ] [ <eth_autoneg> ] [ <eth_in_flowctrl> ] [ <eth_out_flowctrl> ] [ <eth_mdix> ] [ <eth_ratemode> ] [ <eth_swt_monitor> ] [ <eth_ethertype> ] [ <eth_members> ] [ <eth_link_flapped> ] [ <eth_clear_counters> ] [ <eth_reset_cntr> ] [ <nve_addr> ] [ <nve_addr_mask> ] [ <nve_vcid> ] [ <nve_mtu> ] [ <nve_bandwidth> ] [ <nve_encap_str> ] [ <nve_vrf> ] [ <nve_src_addr> ] [ <nve_dst_addr> ] [ <nve_last_link_flap> ] [ <nve_clear_counters> ] [ <nve_load_interval> ] [ <nve_rx_ucastpkts> ] [ <nve_rx_ucastbytes> ] [ <nve_rx_mcastpkts> ] [ <nve_rx_mcastbytes> ] [ <nve_rx_pkts> ] [ <nve_rx_bytes> ] [ <nve_rx_bcastpkts> ] [ <nve_rx_bcastbytes> ] [ <nve_rx_bitrate> ] [ <nve_rx_pktrate> ] [ <nve_tx_ucastpkts> ] [ <nve_tx_ucastbytes> ] [ <nve_tx_mcastpkts> ] [ <nve_tx_mcastbytes> ] [ <nve_tx_bcastpkts> ] [ <nve_tx_bcastbytes> ] [ <nve_tx_pkts> ] [ <nve_tx_bytes> ] [ <nve_tx_bitrate> ] [ <nve_tx_pktrate> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifrange	Enter interface type and number
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
state	(Optional) Interface state
state_rsn_desc	(Optional) Interface state reason detailed
state_rsn	(Optional) Interface state reason
admin_state	(Optional) admin state
eth_rsn_fac	(Optional) State reason facility
eth_rsn_code	(Optional) State reason code
share_state	(Optional) Interface ownership
vpc_status	(Optional) VPC status
eth_bundle	(Optional) Belongs to bundle
eth_hw_desc	(Optional) HW description
eth_hw_addr	(Optional) HW address
eth_bia_addr	(Optional) bia address
desc	(Optional) Interface description
eth_ip_addr	(Optional) IP Address
eth_ip_mask	(Optional) IP address mask
eth_mtu	(Optional) MTU
eth_bw	(Optional) Bandwidth
eth_dly	(Optional) Delay
eth_reliability	(Optional) Reliability
eth_txload	(Optional) Tx load
eth_rxload	(Optional) Rx load
eth_encap_vlan	(Optional) Encapsulation Vlan
eth_mode	(Optional) Port mode
eth_duplex	(Optional) Duplex
eth_speed	(Optional) Speed
eth_media	(Optional) Media type
eth_beacon	(Optional) Beacon
eth_autoneg	(Optional) Autonegotiation
eth_in_flowctrl	(Optional) Input flowcontrol
eth_out_flowctrl	(Optional) Output flowcontrol
eth_mdix	(Optional) Mdix
eth_ratemode	(Optional) Rate mode
eth_swt_monitor	(Optional) Switchport Monitor
eth_ethertype	(Optional) EtherType
eth_members	(Optional) Members in this channel
eth_link_flapped	(Optional) Last link flapped
eth_clear_counters	(Optional) Last clearing of show interface counters
eth_reset_cntr	(Optional) Interface resets
nve_addr	(Optional) Peer address
nve_addr_mask	(Optional) Peer address mask
nve_vcid	(Optional) VCID
nve_mtu	(Optional) MTU
nve_bandwidth	(Optional) Bandwidth
nve_encap_str	(Optional) Encap type
nve_vrf	(Optional) VRF
nve_src_addr	(Optional) Source address
nve_dst_addr	(Optional) Destination address
nve_last_link_flap	(Optional) Last link flap
nve_clear_counters	(Optional) Last clearing of show interface counters
nve_load_interval	(Optional) Load interval
nve_rx_ucastpkts	(Optional) Received ucast pkts
nve_rx_ucastbytes	(Optional) Received ucast bytes
nve_rx_mcastpkts	(Optional) Received mcast pkts
nve_rx_mcastbytes	(Optional) Received mcast bytes
nve_rx_bcastpkts	(Optional) Received bcast pkts
nve_rx_bcastbytes	(Optional) Received bcast bytes
nve_rx_pkts	(Optional) Total received pkts
nve_rx_bytes	(Optional) Total received bytes
nve_rx_bitrate	(Optional) Receive bit rate
nve_rx_pktrate	(Optional) Receive pkt rate
nve_tx_ucastpkts	(Optional) Trasnmitted ucast pkts
nve_tx_ucastbytes	(Optional) Trasnmitted ucast bytes
nve_tx_mcastpkts	(Optional) Trasnmitted mcast pkts
nve_tx_mcastbytes	(Optional) Trasnmitted mcast bytes
nve_tx_bcastpkts	(Optional) Trasnmitted bcast pkts
nve_tx_bcastbytes	(Optional) Trasnmitted bcast bytes
nve_tx_pkts	(Optional) Total transmitted pkts
nve_tx_bytes	(Optional) Total transmitted bytes
nve_tx_bitrate	(Optional) Transmit bit rate
nve_tx_pktrate	(Optional) Transmit pkt rate

Command Mode

/exec

show interface brief

show interface <ifrange> brief [ __readonly__ TABLE_interface <interface> <state> [ <state_rsn> ] [ <state_rsn_desc> ] [ <overlay_mtu> ] [ <overlay_bandwidth> ] [ <overlay_vrf> ] [ <overlay_src_addr> ] [ <overlay_dst_addr> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifrange	Enter interface type and number
brief	Show brief info of interface
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
state	(Optional) Interface state
state_rsn	(Optional) Interface state reason
state_rsn_desc	(Optional) Interface state reason detailed
overlay_mtu	(Optional) MTU
overlay_bandwidth	(Optional) Bandwidth
overlay_vrf	(Optional) VRF
overlay_src_addr	(Optional) Source address
overlay_dst_addr	(Optional) Destination address

Command Mode

/exec

show interface brief

show interface <ifpch_brf> brief [ __readonly__ TABLE_interface <interface> [ <vlan> ] <type> <portmode> <state> <state_rsn_desc> <speed> <ratemode> [ <proto> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifpch_brf	Enter interface type and number in module/slot format
brief	Show brief info of interface
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
vlan	(Optional) Vlan
type	(Optional) Type
portmode	(Optional) Port mode
state	(Optional) Interface state
state_rsn_desc	(Optional) Interface state reason detailed
speed	(Optional) Speed
ratemode	(Optional) Interface port speed
proto	(Optional) Port Channel Protocol

Command Mode

/exec

show interface brief

show interface brief [ controller | cli ] [ __readonly__ TABLE_interface [ <interface> ] [ <vlan> ] [ <type> ] [ <portmode> ] [ <state> ] [ <state_rsn> ] [ <state_rsn_desc> ] [ <desc> ] [ <vrf> ] [ <ipv6_addr> ] [ <ip_addr> ] [ <speed> ] [ <mtu> ] [ <ratemode> ] [ <portchan> ] [ <proto> ] [ <interface_vfc> ] [ <vsan_brief> ] [ <admin_mode> ] [ <admin_trunk_mode> ] [ <status> ] [ <fcot_info> ] [ <bind_info> ] [ <bind_type> ] [ <port_rate_mode> ] [ <oper_speed> ] [ <port_channel> ] [ <ip_addr1> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
brief	Show brief info of interface
controller	(Optional) Show controller configured interfaces
cli	(Optional) Show CLI configured interfaces
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
state	(Optional) Interface state
state_rsn	(Optional) Interface state reason
state_rsn_desc	(Optional) Interface state reason detailed
desc	(Optional) Interface description
vrf	(Optional) Vrf membership
ip_addr	(Optional) IP address
mtu	(Optional) MTU
speed	(Optional) Speed
vlan	(Optional) Vlan
type	(Optional) Type
portmode	(Optional) Port mode
ratemode	(Optional) Interface port speed
portchan	(Optional) Port Channel Membership
proto	(Optional) Port Channel Protocol
interface_vfc	(Optional) Interface index
vsan_brief	(Optional) vsan brief
admin_mode	(Optional) admin mode
admin_trunk_mode	(Optional) admin trunk mode
status	(Optional) status
fcot_info	(Optional) fcot info
bind_info	(Optional) bind interface
bind_type	(Optional) bind type
port_rate_mode	(Optional) rate mode
oper_speed	(Optional) speed
port_channel	(Optional) port channel number
ip_addr1	(Optional) IP address

Command Mode

/exec

show interface brief

show interface <ifloop_brf> brief [ __readonly__ TABLE_interface <interface> <state> [ <desc> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifloop_brf	Enter interface type and number in module/slot format
brief	Show brief info of interface
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
state	(Optional) Interface state
desc	(Optional) Interface description

Command Mode

/exec

show interface brief

show interface <iftunnel_brf> brief [ __readonly__ TABLE_interface <interface> <state> <admin-state> { <tunnel-ipv4> | <tunnel-ipv6> } <mtu> <bandwidth> <encap-type> <keepalive-period> <keepalive-retries> { <src-ipv4> | <src-ipv6> } <src-intf> { <dest-ipv4> | <dest-ipv6> } <dest-hostname> <vrf_name> <wccp_header> <ttl_val> <tunnel_pmtud_age_time> <tunnel_pmtud_min_mtu> <tunnel_pmtud> <tunnel_pgm_mtu> <tunnel_rx_pkt_count> <tunnel_rx_byte_count> <tunnel_rx_rate> <tunnel_tx_pkt_count> <tunnel_tx_byte_count> <tunnel_tx_rate> <tunnel_clear_counter> ]

Syntax Description


show	Show running system information
interface	Show interface status and information
iftunnel_brf	Enter interface type and number in module/slot format
brief	Show brief info of interface
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
state	(Optional) Interface state
admin-state	(Optional)
tunnel-ipv4	(Optional) interface IPv4 address
mtu	(Optional) interface Maximum Transmission Unit
bandwidth	(Optional) interface Bandwidth in kilobits
encap-type	(Optional)
keepalive-period	(Optional) keealive period
keepalive-retries	(Optional) number of retries
src-ipv4	(Optional) tunnel source IPv4 address
src-intf	(Optional) tunnel source interface
dest-ipv4	(Optional) tunnel destination IPv4 address
dest-hostname	(Optional) tunnel destination hostname
vrf_name	(Optional) transport VRF name
wccp_header	(Optional) wccp header
ttl_val	(Optional) tunnel time to live value
tunnel_pmtud_age_time	(Optional) tunnel path MTU discovery age time
tunnel_pmtud_min_mtu	(Optional) tunnel path MTU discovery min mtu
tunnel_pmtud	(Optional) tunnel path MTU discovered
tunnel_pgm_mtu	(Optional) tunnel actual programmed MTU
tunnel_rx_pkt_count	(Optional) total number of packets received
tunnel_rx_byte_count	(Optional) total number of bytes received
tunnel_rx_rate	(Optional) packets input rate per 5 minutes
tunnel_tx_pkt_count	(Optional) total number of packets transmitted
tunnel_tx_byte_count	(Optional) total number of bytes transmitted
tunnel_tx_rate	(Optional) packets transmitted per 5 minutes
tunnel_clear_counter	(Optional) Last clearing of show interface counters

Command Mode

/exec

show interface brief

show interface <ifmgmt_brf> brief [ __readonly__ TABLE_interface <interface> [ <vrf> ] <state> [ <ipv6_addr> ] [ <ip_addr> ] <mtu> <speed> [ <duplex> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifmgmt_brf	Enter interface type and number in module/slot format
brief	Show brief info of interface
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
vrf	(Optional) Vrf membership
state	(Optional) Interface state
ip_addr	(Optional) IP address
mtu	(Optional) MTU
speed	(Optional) Speed
duplex	(Optional) Duplex

Command Mode

/exec

show interface brief

show interface <ifeth_brf> brief [ __readonly__ TABLE_interface <interface> [ <vlan> ] <type> <portmode> <state> <state_rsn_desc> <speed> <ratemode> [ <portchan> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifeth_brf	Enter interface type and number in module/slot format
brief	Show brief info of interface
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
vlan	(Optional) Vlan
type	(Optional) Type
portmode	(Optional) Port mode
state	(Optional) Interface state
state_rsn_desc	(Optional) Interface state reason detailed
speed	(Optional) Speed
ratemode	(Optional) Interface port speed
portchan	(Optional) Port Channel Membership

Command Mode

/exec

show interface brief

show interface <ifrange> brief [ __readonly__ TABLE_interface <interface> <state> [ <state_rsn> ] [ <state_rsn_desc> ] [ <admin_state> ] [ <nve_addr> ] [ <nve_vcid> ] [ <nve_mtu> ] [ <nve_bandwidth> ] [ <nve_vrf> ] [ <nve_src_addr> ] [ <nve_dst_addr> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifrange	Enter interface type and number
brief	Show brief info of interface
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
state	(Optional) Interface state
state_rsn	(Optional) Interface state reason
state_rsn_desc	(Optional) Interface state reason detailed
admin_state	(Optional) admin state
nve_addr	(Optional) Peer address
nve_vcid	(Optional) VCID
nve_mtu	(Optional) MTU
nve_bandwidth	(Optional) Bandwidth
nve_vrf	(Optional) VRF
nve_src_addr	(Optional) Source address
nve_dst_addr	(Optional) Destination address

Command Mode

/exec

show interface cable-diagnostics-tdr

show interface <ifid_tdr> cable-diagnostics-tdr [ __readonly__ TABLE_interface <interface> <speed> <distance1> <pair1_status> <distance2> <pair2_status> <distance3> <pair3_status> <distance4> <pair4_status> ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifid_tdr	Enter interface type and number in module/slot format
cable-diagnostics-tdr	Show interface tdr test information
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
speed	(Optional) Speed
distance1	(Optional) Distance to fault for pair 1
distance2	(Optional) Distance to fault for pair 2
distance3	(Optional) Distance to fault for pair 3
distance4	(Optional) Distance to fault for pair 4
pair1_status	(Optional) Pair1 status
pair2_status	(Optional) Pair2 status
pair3_status	(Optional) Pair3 status
pair4_status	(Optional) Pair4 status

Command Mode

/exec

show interface capabilities

show interface capabilities [ __readonly__ TABLE_interface <interface> <model> <type> <speed> <duplex> <trunk_encap> [ <dce_capable> ] <channel> <bcast_supp> <flo_ctrl> <rate_mode> <port_mode> [ <fast_start> ] <qos_scheduling> <cos_rewrite> <tos_rewrite> [ <inline_power> ] <span> <udld> [ <mdix> ] [ <tdr> ] <lnk_debounce> <lnk_debounce_time> <fex_fabric> <dot1q_tunnel> [ <pvlan_trunk_mode> ] [ <port_group> ] [ <port_group_members> ] <eee_capable> <pfc_capable> [ <speed_group_capable> ] <buffer_boost_capable> [ <bkout_capable> ] [ <macsec_capable> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
capabilities	Show interface capabilities information
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
model	(Optional) Model
type	(Optional) Type
speed	(Optional) Speed
duplex	(Optional) Duplex
trunk_encap	(Optional) Trunk encap. type
dce_capable	(Optional) DCE mode capable
channel	(Optional) Channel
bcast_supp	(Optional) Broadcast suppression
flo_ctrl	(Optional) Flowcontrol
rate_mode	(Optional) Rate mode
port_mode	(Optional) Port mode
fast_start	(Optional) Fast start
qos_scheduling	(Optional) QOS scheduling
cos_rewrite	(Optional) CoS rewrite
tos_rewrite	(Optional) ToS rewrite
inline_power	(Optional) Inline power
span	(Optional) SPAN
udld	(Optional) UDLD
mdix	(Optional) MDIX
tdr	(Optional) TDR
lnk_debounce	(Optional) Link debounce
lnk_debounce_time	(Optional) Link debounce time
fex_fabric	(Optional) FEX Fabric
dot1q_tunnel	(Optional) dot1q-tunnel
pvlan_trunk_mode	(Optional) Private-vlan trunk mode
port_group	(Optional) Port Group
port_group_members	(Optional) Port Group Members
eee_capable	(Optional) EEE (efficient-eth)
pfc_capable	(Optional) PFC Capable:
bkout_capable	(Optional) Breakout Capable:
buffer_boost_capable	(Optional) Buffer Boost Capable:
speed_group_capable	(Optional) Speed group capable
macsec_capable	(Optional) MACSEC capable

Command Mode

/exec

show interface capabilities

show interface <ifid_eth_cap> capabilities [ __readonly__ TABLE_interface <interface> <model> <type> <speed> <duplex> <trunk_encap> [ <dce_capable> ] <channel> <bcast_supp> <flo_ctrl> <rate_mode> <port_mode> [ <fast_start> ] <qos_scheduling> <cos_rewrite> <tos_rewrite> [ <inline_power> ] <span> <udld> [ <mdix> ] [ <tdr> ] <lnk_debounce> <lnk_debounce_time> <fex_fabric> <dot1q_tunnel> [ <pvlan_trunk_mode> ] [ <port_group> ] [ <port_group_members> ] <eee_capable> <pfc_capable> [ <speed_group_capable> ] <buffer_boost_capable> [ <bkout_capable> ] [ <macsec_capable> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifid_eth_cap	Enter interface type and number in module/slot format
capabilities	Show interface capabilities information
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
model	(Optional) Model
type	(Optional) Type
speed	(Optional) Speed
duplex	(Optional) Duplex
trunk_encap	(Optional) Trunk encap. type
dce_capable	(Optional) DCE mode capable
channel	(Optional) Channel
bcast_supp	(Optional) Broadcast suppression
flo_ctrl	(Optional) Flowcontrol
rate_mode	(Optional) Rate mode
port_mode	(Optional) Port mode
fast_start	(Optional) Fast start
qos_scheduling	(Optional) QOS scheduling
cos_rewrite	(Optional) CoS rewrite
tos_rewrite	(Optional) ToS rewrite
inline_power	(Optional) Inline power
span	(Optional) SPAN
udld	(Optional) UDLD
mdix	(Optional) MDIX
tdr	(Optional) TDR
lnk_debounce	(Optional) Link debounce
lnk_debounce_time	(Optional) Link debounce time
fex_fabric	(Optional) FEX Fabric
dot1q_tunnel	(Optional) dot1q-tunnel
pvlan_trunk_mode	(Optional) Private-vlan trunk mode
port_group	(Optional) Port Group
port_group_members	(Optional) Port Group Members
eee_capable	(Optional) EEE (efficient-eth)
pfc_capable	(Optional) PFC Capable:
bkout_capable	(Optional) Breakout Capable:
buffer_boost_capable	(Optional) Buffer Boost Capable:
speed_group_capable	(Optional) Speed group capable
macsec_capable	(Optional) MACSEC capable

Command Mode

/exec

show interface counters

show interface <ifrange> counters [ __readonly__ TABLE_interface <interface> [ <overlay_load_interval> ] [ <overlay_rx_ucastpkts> ] [ <overlay_rx_ucastbytes> ] [ <overlay_rx_mcastpkts> ] [ <overlay_rx_mcastbytes> ] [ <overlay_rx_pkts> ] [ <overlay_rx_bytes> ] [ <overlay_rx_bcastpkts> ] [ <overlay_rx_bcastbytes> ] [ <overlay_rx_bitrate> ] [ <overlay_rx_pktrate> ] [ <overlay_tx_ucastpkts> ] [ <overlay_tx_ucastbytes> ] [ <overlay_tx_mcastpkts> ] [ <overlay_tx_mcastbytes> ] [ <overlay_tx_bcastpkts> ] [ <overlay_tx_bcastbytes> ] [ <overlay_tx_pkts> ] [ <overlay_tx_bytes> ] [ <overlay_tx_bitrate> ] [ <overlay_tx_pktrate> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifrange	Enter interface type and number
counters	Show interface counters
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
overlay_load_interval	(Optional) Load interval
overlay_rx_ucastpkts	(Optional) Received ucast pkts
overlay_rx_ucastbytes	(Optional) Received ucast bytes
overlay_rx_mcastpkts	(Optional) Received mcast pkts
overlay_rx_mcastbytes	(Optional) Received mcast bytes
overlay_rx_bcastpkts	(Optional) Received bcast pkts
overlay_rx_bcastbytes	(Optional) Received bcast bytes
overlay_rx_pkts	(Optional) Total received pkts
overlay_rx_bytes	(Optional) Total received bytes
overlay_rx_bitrate	(Optional) Receive bit rate
overlay_rx_pktrate	(Optional) Receive pkt rate
overlay_tx_ucastpkts	(Optional) Trasnmitted ucast pkts
overlay_tx_ucastbytes	(Optional) Trasnmitted ucast bytes
overlay_tx_mcastpkts	(Optional) Trasnmitted mcast pkts
overlay_tx_mcastbytes	(Optional) Trasnmitted mcast bytes
overlay_tx_bcastpkts	(Optional) Trasnmitted bcast pkts
overlay_tx_bcastbytes	(Optional) Trasnmitted bcast bytes
overlay_tx_pkts	(Optional) Total transmitted pkts
overlay_tx_bytes	(Optional) Total transmitted bytes
overlay_tx_bitrate	(Optional) Transmit bit rate
overlay_tx_pktrate	(Optional) Transmit pkt rate

Command Mode

/exec

show interface counters

show interface <ifid_ctr> counters [ snmp ] [ __readonly__ { TABLE_rx_counters <interface_rx> [ <eth_inpkts> ] [ <eth_inbytes> ] [ <eth_inucast> ] [ <eth_inmcast> ] [ <eth_inbcast> ] } { TABLE_tx_counters <interface_tx> [ <eth_outpkts> ] [ <eth_outbytes> ] [ <eth_outucast> ] [ <eth_outmcast> ] [ <eth_outbcast> ] } ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifid_ctr	Enter interface type and number in module/slot format
counters	Show interface counters
snmp	(Optional) Show SNMP MIB values
__readonly__	(Optional) Read Only
interface_rx	(Optional) Interface index rx
interface_tx	(Optional) Interface index tx
TABLE_rx_counters	(Optional) show Rx counters
eth_inpkts	(Optional) Packets input
eth_inbytes	(Optional) Bytes input
eth_inucast	(Optional) Unicasts
eth_inmcast	(Optional) Multicasts
eth_inbcast	(Optional) Broadcasts
TABLE_tx_counters	(Optional) show Tx counters
eth_outpkts	(Optional) Packets output
eth_outbytes	(Optional) Bytes output
eth_outucast	(Optional) Unicasts
eth_outmcast	(Optional) Multicasts
eth_outbcast	(Optional) Broadcasts

Command Mode

/exec

show interface counters

show interface counters [ module <module> ] [ __readonly__ { TABLE_rx_counters <interface_rx> [ <eth_inpkts> ] [ <eth_inbytes> ] [ <eth_inucast> ] [ <eth_inmcast> ] [ <eth_inbcast> ] [ <eth_l3in_bytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_bcastpkts> ] } { TABLE_tx_counters <interface_tx> [ <eth_outpkts> ] [ <eth_outbytes> ] [ <eth_outucast> ] [ <eth_outmcast> ] [ <eth_outbcast> ] [ <eth_l3out_bytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_bcastpkts> ] } ]

Syntax Description


show	Show running system information
interface	Show interface status and information
counters	Show interface counters
module	(Optional) Limit display to interfaces on module
module	(Optional) Enter module number
__readonly__	(Optional) Read Only
interface_rx	(Optional) Interface index rx
interface_tx	(Optional) Interface index tx
TABLE_rx_counters	(Optional) show Rx counters
TABLE_tx_counters	(Optional) show Tx counters
eth_inpkts	(Optional) Packets input
eth_inbytes	(Optional) Bytes input
eth_inucast	(Optional) Unicasts
eth_inmcast	(Optional) Multicasts
eth_inbcast	(Optional) Broadcasts
eth_outpkts	(Optional) Packets output
eth_outbytes	(Optional) Bytes output
eth_outucast	(Optional) Unicasts
eth_outmcast	(Optional) Multicasts
eth_outbcast	(Optional) Broadcasts
eth_l3in_bytes	(Optional) L3 Rx bytes
eth_l3in_ucastpkts	(Optional) L3 Rx Unicast pkts
eth_l3in_mcastpkts	(Optional) L3 Rx Multicast pkts
eth_l3in_bcastpkts	(Optional) L3 Rx Broadcast pkts
eth_l3out_bytes	(Optional) L3 Tx bytes
eth_l3out_ucastpkts	(Optional) L3 Tx Unicast pkts
eth_l3out_mcastpkts	(Optional) L3 Tx Multicast pkts
eth_l3out_bcastpkts	(Optional) L3 Tx Broadcast pkts

Command Mode

/exec

Cisco Nexus 3548 NX-OS Command Reference (Show Commands), Release 7.0(3)I7(4)

Bias-Free Language

Results

Chapter: I Show Commands

I Show Commands

show icam entries acl module inst

show icam entries multicast module

show icam prediction entries acl module inst

show icam prediction entries multicast module

show icam prediction resource acl_tcam module inst trend

show icam prediction resource module inst

show icam resource module inst

show icam scale

show ieth-header-decode

show imp client

show imp client sa

show incompatibility-all system

show incompatibility system

show install

show install all failed-standby

show install all failure-reason

show install all impact

show install all status

show install all time-stats

show install impact

show install impact

show install impact detail

show install log

show install packages

show install patches

show interface

show interface

show interface

show interface

show interface

show interface

show interface

show interface

show interface brief

show interface brief

show interface brief

show interface brief

show interface brief

show interface brief

show interface brief

show interface brief

show interface cable-diagnostics-tdr

show interface capabilities

show interface capabilities

show interface counters

show interface counters

show interface counters