show
|
Show running system information
|
sockets
|
Display sockets status and configuration
|
statistics
|
Display sockets statistics
|
all
|
(Optional) Display TCP/UDP/RAW v4/v6 protocols statistics
|
tcp
|
(Optional) Display TCP v4 protocol statistics
|
tcp6
|
(Optional) Display TCP v6 protocol statistics
|
tcpsum
|
(Optional) Display sum of TCP v4 and TCP v6 protocols statistics
|
udp
|
(Optional) Display UDP v4 protocol statistics
|
udp6
|
(Optional) Display UDP v6 protocol statistics
|
udpsum
|
(Optional) Display sum of UDP v4 and UDP v6 protocols statistics
|
raw
|
(Optional) Display RAW v4 protocol statistics
|
raw6
|
(Optional) Display RAW v6 protocol statistics
|
rawsum
|
(Optional) Display sum of RAW v4 and RAW v6 protocols statistics
|
__readonly__
|
(Optional)
|
TABLE_stat
|
(Optional) sockets statistics table
|
rx-total
|
(Optional) total packets received
|
rx-bad-csum
|
(Optional) packets received with ccksum errs
|
rx-bad-offset
|
(Optional) packets received with bad offset
|
rx-too-short
|
(Optional) packets received too short
|
rx-bad-md5
|
(Optional) Recieved bad digest
|
rx-inseq-pack
|
(Optional) packets received in sequence
|
rx-inseq-bytes
|
(Optional) bytes received in sequence
|
rx-dup-pack
|
(Optional) duplicate-only packets received
|
rx-dup-bytes
|
(Optional) duplicate-only bytes received
|
rx-partdup-pack
|
(Optional) packets with some duplicate data
|
rx-partdup-bytes
|
(Optional) dup. bytes in part-dup. packets
|
rx-oo-pack
|
(Optional) out-of-order packets received
|
rx-oo-bytes
|
(Optional) out-of-order bytes received
|
rx-afterwin-pack
|
(Optional) packets with data after window
|
rx-afterwin-bytes
|
(Optional) bytes rcvd after window
|
rx-afterclose-pack
|
(Optional) packets rcvd after close
|
rx-winprobe-pack
|
(Optional) rcvd window probe packets
|
rx-winupdate-pack
|
(Optional) rcvd window update packets
|
rx-dupack-pack
|
(Optional) rcvd duplicate acks
|
rx-dupack-unsent-pack
|
(Optional) rcvd acks for unsent data
|
rx-ack-pack
|
(Optional) rcvd ack packets
|
rx-ack-bytes
|
(Optional) bytes acked by rcvd acks
|
rx-rcv-memdrop
|
(Optional) packets dropped for lack of memory
|
rx-dig-mssing
|
(Optional) digest missing
|
rx-dig-unexpected
|
(Optional) digest unexpected
|
rx-dig-notused
|
(Optional) digest not used
|
rx-dig-valid
|
(Optional) digest valid
|
rx-dig-invalid
|
(Optional) digest invalid
|
rx-get-passwd-fail
|
(Optional) get pass failed for RST
|
rx-md5-mbuf-exded
|
(Optional) md5 passwd exceeds mbuf
|
rx-uspec-src-recv
|
(Optional) Dropped Unspecified src pkt recieved
|
rx-pkt-too-short
|
(Optional) Dropped Packet too short
|
rx-sin-finest
|
(Optional) Dropped packet set with SYN/FIN
|
rx-black-hole-syn
|
(Optional) Dropped black hole SYN
|
rx-black-hole
|
(Optional) Dropped black hole
|
rx-drop-no-inpcb
|
(Optional) Dropped no inpcb
|
rx-drop-notcpcb
|
(Optional) Dropped no tcpcb
|
rx-drp-sock-closed
|
(Optional) Dropped socket closed
|
rx-syn-with-rst
|
(Optional) Dropped SYN with reset
|
rx-syn-drop
|
(Optional) Dropped SYN
|
rx-bandlim
|
(Optional) Dropped Bandlim rst open port
|
rx-forged-pkt
|
(Optional) Dropped Same src/dst
|
rx-drp-mbcast
|
(Optional) Dropped Broadcast/Multicast
|
rx-drp-syn-add
|
(Optional) Dropped Adding SYN failed
|
rx-drp-syn-recvd
|
(Optional) ACK recvd not for our SYN
|
rx-drp-cc-sent
|
(Optional) Dropped cc sent
|
rx-drp-rst-ccsent
|
(Optional) Dropped cc sent with reset
|
rx-frecv-enqueue
|
(Optional) Fast recv packets enqueued
|
rx-frecv-enqueue-fail
|
(Optional) Fast recv enqueue failed
|
rx-ftcp-cant-rcv-more
|
(Optional) Fast TCP can not recv more
|
rx-ftcp-data-ack-toapp-fail
|
(Optional) Fast TCP data ACK to app failed
|
rx-ftcp-data-ack-toapp
|
(Optional) Fast TCP data ACK to app
|
tx-total
|
(Optional) total packets sent
|
tx-urg
|
(Optional) packets sent with URG only
|
tx-ctrl
|
(Optional) control (SYN|FIN|RST) packets sent
|
tx-data-pack
|
(Optional) data packets sent
|
tx-data-bytes
|
(Optional) data bytes sent
|
tx-reasm-pack
|
(Optional) data packets retransmitted
|
tx-reasm-bytes
|
(Optional) data bytes retransmitted
|
tx-ackonly-pack
|
(Optional) ack-only packets sent
|
tx-winprobe-pack
|
(Optional) window probes sent
|
tx-winupdate-bytes
|
(Optional) window update-only packets sent
|
tx-encrypt
|
(Optional) Encrypted packets sent
|
tx-unencrypt
|
(Optional) Unencrypted packets sent
|
tx-md5rst
|
(Optional) No of encrypted RST packets
|
tx-conn-init
|
(Optional) connections initiated
|
tx-conn-accepted
|
(Optional) connections accepted
|
tx-conn-estd
|
(Optional) connections established
|
closed
|
(Optional) conn. closed (includes drops)
|
dropped
|
(Optional) connections dropped
|
emb-dropped
|
(Optional) embryonic connections dropped
|
tx-rxmt-timeout
|
(Optional) total rxmt timeout
|
tx-rxmt-timeout-dropped
|
(Optional) connections dropped in rxmt timeout
|
tx-ka-timeout
|
(Optional) keepalive timeouts
|
tx-ka-probe
|
(Optional) keepalive probes sent
|
tx-ka-drop
|
(Optional) connections dropped in keepalive
|
gen-seg-timed
|
(Optional) segs where we tried to get rtt
|
gen-rtt-updated
|
(Optional) times we succeeded to get rtt
|
gen-delack
|
(Optional) delayed acks sent
|
gen-persist-timeout
|
(Optional) persist timeouts
|
gen-paws-drop
|
(Optional) segments dropped due to PAWS
|
gen-predack
|
(Optional) hdr predict ok for acks
|
gen-preddat
|
(Optional) hdr predict ok for data pkts
|
gen-pcb-cachemiss
|
(Optional) PCB cache miss
|
gen-cache-drtt
|
(Optional) times cached RTT in route updated
|
gen-cache-drttvar
|
(Optional) times cached rttvar updated
|
gen-cached-ssthresh
|
(Optional) times cached ssthresh updated
|
gen-usedrtt
|
(Optional) times RTT initialized from route
|
gen-usedrttvar
|
(Optional) times RTTVAR initialized from rt
|
gen-usedssthresh
|
(Optional) times ssthresh initialized from rt
|
gen-persistdrop
|
(Optional) timeout in persist state
|
gen-badsyn
|
(Optional) bogus SYN, e.g. premature ACK
|
gen-mturesent
|
(Optional) resends due to MTU discovery
|
gen-list-endrop
|
(Optional) listen queue overflows
|
gen-rpm-bind-synsock
|
(Optional) rpm bind in synsock
|
gen-rpm-bindsynadd
|
(Optional) rpm bind in synadd
|
gen-rpm-bindlookup
|
(Optional) rpm bind in lookup
|
gen-rpm-bindsetsock
|
(Optional) rpm bind in setsock
|
gen-rpm-unbind-getpass
|
(Optional) rpm unbind get pass
|
gen-rpm-unbinduser1
|
(Optional) rpm unbind by user
|
gen-rpm-unbinduser2
|
(Optional) rpm unbind by user1
|
gen-rpm-unbindrollover
|
(Optional) rpm unbind during rollover
|
gen-rpm-unbind-synfree
|
(Optional) rpm unbind in syn free
|
gen-rpm-unbind-tpfree
|
(Optional) rpm unbind in tp free
|
syn-sc-added
|
(Optional) entry added to syncache
|
syn-retransmitted
|
(Optional) syncache entry was retransmitted
|
syn-dupsyn
|
(Optional) duplicate SYN packet
|
syn-dropped
|
(Optional) could not reply to packet
|
syn-completed
|
(Optional) successful extraction of entry
|
syn-bucket-overflow
|
(Optional) syncache per-bucket limit hit
|
syn-cache-overflow
|
(Optional) syncache cache limit hit
|
syn-sc-reset
|
(Optional) RST removed entry from syncache
|
syn-sc-stale
|
(Optional) timed out or listen socket gone
|
syn-sc-aborted
|
(Optional) syncache entry aborted
|
syn-sc-badack
|
(Optional) removed due to bad ACK
|
syn-sc-unreach
|
(Optional) ICMP unreachable received
|
syn-sc-zonefail
|
(Optional) zalloc() failed
|
syn-sc-sendcookie
|
(Optional) SYN cookie sent
|
syn-sc-recvcookie
|
(Optional) SYN cookie received
|
syn-sc-crosshits
|
(Optional) crosshits on the SC blocks
|
syn-sc-supsyncrosshits
|
(Optional) crosshits dup SYN on SC block
|
syn-sc-removecrosshits
|
(Optional) crosshits on SC blocks to remove
|
udp-rx-total
|
(Optional) total udp packets
|
udp-rx-bad-csum
|
(Optional) udp checksum error
|
udp-rx-no-csum
|
(Optional) udp no checksum
|
udp-rx-too-short
|
(Optional) udp packets drops
|
udp-rx-bad-len
|
(Optional) udp bad length
|
udp-rx-no-port
|
(Optional) udp no port
|
udp-rx-no-port-bcast
|
(Optional) udp no port broadcast
|
udp-rx-no-port-mcast
|
(Optional) udp no port multicast
|
udp-rx-full-socket-drop
|
(Optional) udp dropped full socket
|
udp-tx-total
|
(Optional) udp total packets
|
raw-rx-version
|
(Optional) raw sockets version
|
raw-rx-rcvd
|
(Optional) raw sockets connection received
|
raw-rx-no-port
|
(Optional) raw socket no port
|
raw-rx-full-socket-drop
|
(Optional) raw socket full sockets drop
|
raw-tx-sent
|
(Optional) raw socket connection sent
|
inpcb-tot-alloc
|
(Optional) inpcb allocation
|
inpcb-tot-bind
|
(Optional) inpcb bind
|
inpcb-tot-laddr
|
(Optional) inpcb laddr
|
inpcb-tot-connect
|
(Optional) inpcb connect
|
inpcb-tot-disconnect
|
(Optional) inpcb disconnect
|
inpcb-tot-detach
|
(Optional) inpcb detach
|
inpcb-tot-detach-noinc
|
(Optional) inpcb detaach no increment
|
inpcb-tot-detach-rort
|
(Optional) inpcb detach no return
|
inpcb-tot-rtfree
|
(Optional) inpcb rt free
|
inpcb-tot-setsock-addr
|
(Optional) inpcb set socket address
|
inpcb-tot-setpeeraddr
|
(Optional) inpcb set peer address
|
inpcb-tot-notify
|
(Optional) inpcb notify
|
inpcb-tot-lookup-npacl-deny
|
(Optional) inpcb lookup hash npacl deny
|
inpcb-tot-lookup-npacl-allow
|
(Optional) inpcb lookup npacl allow
|
inpcb-tot-inshash-ipv4
|
(Optional) inpcb inshash ipv4
|
inpcb-tot-inshash-ipv6
|
(Optional) inpcb inshash ipv6
|
inpcb-tot-brehash-ipv4
|
(Optional) inpcb brehash ipv4
|
inpcb-tot-brehash-ipv6
|
(Optional) inpcb brehash ipv6
|
inpcb-tot-bremhash
|
(Optional) inpcb brehash
|
inpcb-err-allocnomem
|
(Optional) inpcb allocation no memory error
|
inpcb-err-bindeinavl
|
(Optional) inpcb bind einval error
|
inpcb-err-eaddrinuse
|
(Optional) inpcb eaddr in use error
|
inpcb-err-eagain
|
(Optional) inpcb eagain error
|
inpcb-err-eagain2
|
(Optional) inpcb eagain2 error
|
inpcb-err-eaddrnotavail
|
(Optional) inpcb eaddr not availableerror
|
inpcb-err-eafnosupport
|
(Optional) inpcb eaf no support error
|
inpcb-err-enomem
|
(Optional) inpcb no-memory error
|
inpcb-err-ehostunreach
|
(Optional) inpcb ehost unreachable error
|
inpcb-err-laddr-enxio
|
(Optional) inpcb laddr enxio error
|
inpcb-err-laddr-ehostunreach2
|
(Optional) inpcb laddr ehost unreachable2 error
|
inpcb-err-connectladdr
|
(Optional) inpcb connect laddr error
|
inpcb-err-connect-eaddrinuse
|
(Optional) inpcb connect eaddress in use error
|
inpcb-err-connbind
|
(Optional) inpcb connect bind error
|
inpcb-err-sockaddrenomem
|
(Optional) inpcb socket address no memory error
|
inpcb-err-sockaddreconnreset
|
(Optional) inpcb socket address econnect reset error
|
inpcb-err-peeraddr-enomem
|
(Optional) inpcb peer address no memory error
|
inpcb-err-econnrest
|
(Optional) inpcb connection rest error
|
inpcb-err-respond-enobufs
|
(Optional) inpcb respond no buffer error
|
inpcb-err-binshash-enobufs
|
(Optional) inpcb binshash no buffer error
|
in6pcb-tot-setport
|
(Optional) in6pcb set port error
|
in6pcb-tot-bind
|
(Optional) in6pcb bind
|
in6pcb-tot-laddr
|
(Optional) in6pcb laddr
|
in6pcb-tot-connect
|
(Optional) in6pcb connect
|
in6pcb-tot-disconnect
|
(Optional) in6pcb disconnect
|
in6pcb-tot-detach
|
(Optional) in6pcb detach
|
in6pcb-tot-sockaddr
|
(Optional) in6pcb socket address
|
in6pcb-tot-peeraddr
|
(Optional) in6pcb peer address
|
in6pcb-tot-notify
|
(Optional) in6pcb notify
|
in6pcb-tot-lookuplocal
|
(Optional) in6pcb lookup local
|
in6pcb-tot-hashnpacl-deny
|
(Optional) in6pcb hash npacl deny
|
in6pcb-err-setporteagain
|
(Optional) in6pcb set port again error
|
in6pcb-err-setporteagain2
|
(Optional) in6pcb set port again2 error
|
in6pcb-err-seteagain3
|
(Optional) in6pcb set port again3 error
|
in6pcb-bind-eafnosupport
|
(Optional) in6pcb bind eaf no support error
|
in6pcb-err-bindeaddrinuse
|
(Optional) in6pcb bind address in use error
|
in6pcb-err-bindeaddrinuse2
|
(Optional) in6pcb bind address in use2 error
|
in6pcb-err-bindeaddrinuse3
|
(Optional) in6pcb bind address in use3 error
|
in6pcb-err-bindeaddrinuse4
|
(Optional) in6pcb bind address in use4 error
|
in6pcb-err-bindsetport
|
(Optional) in6pcb bind setport error
|
in6pcb-err-bindeagain
|
(Optional) in6pcb bind again error
|
in6pcb-err-laddr-eafnosupport
|
(Optional) in6pcb laddr eaf no support error
|
in6pcb-err-eaddrnotavail
|
(Optional) in6pcb address not available error
|
in6pcb-err-laddr-enomem
|
(Optional) in6pcb laddr no memory error
|
in6pcb-err-laddr-ehostreach
|
(Optional) in6pcb laddr host reach error
|
in6pcb-err-laddr-ehostunreach2
|
(Optional) in6pcb laddr host reach2 error
|
in6pcb-err-laddr-ehostunreach3
|
(Optional) in6pcb laddr host reach3 error
|
in6pcb-err-laddr-ehostunreach4
|
(Optional) in6pcb laddr host reach4 error
|
in6pcb-err-laddr-enxio
|
(Optional) in6pcb laddr enxio error
|
in6pcb-err-connladdr
|
(Optional) in6pcb connect laddr error
|
in6pcb-err-conneaddrinuse
|
(Optional) in6pcb connect eaddress in use error
|
in6pcb-err-connbind
|
(Optional) in6pcb connect bind error
|
in6pcb-err-sockaddr-enomem
|
(Optional) in6pcb socket address no memory error
|
in6pcb-err-v4maps-enomem
|
(Optional) in6pcb v4maps no memory error
|
in6pcb-err-setsock-noinp
|
(Optional) in6pcb set socket noinp error
|
in6pcb-err-setpeer-noinp
|
(Optional) in6pcb set peer noinp error
|
in6pcb-err-sockaddr-noinp
|
(Optional) in6pcb socket address noinp error
|
in6pcb-err-peeraddr-noinp
|
(Optional) in6pcb peer address noinp error
|
in6pcb-err-notify-einavl
|
(Optional) in6pcb notify eingress available error
|
in6pcb-err-ctloutput-nosoopt
|
(Optional) in6pcb control output no socket opt error
|