show

Show running system information

glbp

Show GLBP

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

interface

(Optional) Interface

int-num

(Optional) Interface type and number

group

(Optional) Group number

group-num

(Optional) Group number

active

(Optional) Groups in active state

standby

(Optional) Groups in standby state

disabled

(Optional) Groups in disabled state

init

(Optional) Groups in init state

listen

(Optional) Groups in listen state

__readonly__

(Optional) Read only

show_glbp_start

(Optional) show glbp start

TABLE_grp_detail

(Optional) Group table detail

sg_nsf_state

(Optional) show nsf state

sg_print_nsf_state

(Optional) Print NSF state

sg_nsf_end

(Optional) End of NSF details

sg_if_index

(Optional) Interface type and number

sg_group_num

(Optional) Group number

sg_state

(Optional) glbp state

sg_state_reason

(Optional) Reason

sg_state_count

(Optional) Number of state changes

sg_state_last_change

(Optional) Time of last state change

sg_vip

(Optional) Virtual IP address

sg_vip_attr

(Optional) Virtual IP address attribute

sg_num_vip_sec

(Optional) Number of Secondary virtual IP address

TABLE_grp_vip_sec

(Optional) Group secondary ip address

sg_vip_sec

(Optional) Secondary virtual IP address

sg_vip_sec_attr

(Optional) Secondary Virtual IP address attribute

sg_vip_sec_end

(Optional) End of Secondary Virtual IP addresses

sg_active_addr

(Optional) Active IP address

sg_cur_hello

(Optional) Current Hello Time

sg_cfg_hello

(Optional) Configured Hello Time

sg_active_hello

(Optional) Active Hello Time

sg_cur_hold

(Optional) Current Hold Time

sg_cfg_hold

(Optional) Configured Hold Time

sg_active_hold

(Optional) Active Hold Time

sg_is_hello_timer_running

(Optional) Hello Timer

sg_next_hello

(Optional) Time for next hello

sg_cur_redirect_time

(Optional) Current redirect time

sg_cfg_redirect_time

(Optional) Configured redirect time

sg_active_redirect_time

(Optional) Active redirect time

sg_cur_sec_holdtime

(Optional) Current secondary hold time

sg_cfg_sec_holdtime

(Optional) Configured secondary hold time

sg_active_sec_holdtime

(Optional) Active secondary hold time

sg_cfg_ext_holdtime

(Optional) Configured Extended hold time

sg_timer_end

(Optional) End of GLBP Timer values

sg_auth_data_type

(Optional) Authentication data type

sg_auth_data

(Optional) Authentication data

sg_preempt

(Optional) Preemption enabled

sg_preempt_min_delay

(Optional) Preemption min delay

sg_is_preempt_timer_running

(Optional) Preemption timer running

sg_preempt_ts

(Optional) Preemption timestamp

sg_delay_end

(Optional) End of delay values

sg_active_priority

(Optional) Active router priority

sg_active_timer

(Optional) Active timer value

sg_standby_addr

(Optional) Standby address

sg_standby_priority

(Optional) Standby priority

sg_standby_timer

(Optional) Standby timer value

sg_router_end

(Optional) End of Routers

sg_grp_priority

(Optional) Group priority

sg_grp_priority_attr

(Optional) Group priority attribute

sg_weighting

(Optional) Weighting

sg_weighting_attr

(Optional) Weighting attribute

sg_weighting_satisfied

(Optional) Weighting satisfied

sg_weighting_max

(Optional) Weighting max

sg_weighting_lower

(Optional) Weighting lower

sg_weighting_upper

(Optional) Weighting upper

sg_track_object

(Optional) Track

sg_track_state

(Optional) Track state

sg_track_decrement

(Optional) Track decrement

sg_weighting_end

(Optional) End of weighting

sg_load_bal

(Optional) Load balancing

sg_red_name

(Optional) IP redundancy name

sg_mem_count

(Optional) Membership count

sg_mem_start

(Optional) Start of membership attributes

TABLE_grp_members

(Optional) Group members

sg_mem_local_mac

(Optional) Member's local mac address

sg_mem_local_ip

(Optional) Member's local ip address

sg_mem_mac

(Optional) Member's mac address

sg_mem_ip

(Optional) Member's ip address

sg_is_mem_local

(Optional) Local

sg_is_mem_authenticated

(Optional) Is Member authenticated

sg_mem_end

(Optional) End of membership attributes

sg_all_mem_end

(Optional) End of all members

sg_fwd_count

(Optional) Number of forwarders in the group

sg_active_fwd_count

(Optional) Number of active forwarders in group

sg_fwd_start

(Optional) Forwarder Start attribute

TABLE_fwd_detail

(Optional) Forwarder table detail

sg_fwd_num

(Optional) Forwarder Number

sg_fwd_state

(Optional) Forwarder State

sg_fwd_state_change_count

(Optional) Forwarder State Change count

sg_fwd_last_state_change

(Optional) Time of last State Change

sg_fwd_mac

(Optional) Forwarder MAC address

sg_fwd_mac_type

(Optional) Forwarder MAC address type

sg_fwd_cfg_mac

(Optional) Configured Forwarder MAC address

sg_fwd_owner

(Optional) Forwarder owner

sg_fwd_redirect

(Optional) Forwarder redirection enabled

sg_fwd_redirect_timer

(Optional) Forwarder redirection timer

sg_fwd_is_sec_tmr_run

(Optional) Is Forwarder secondary timer running

sg_fwd_sec_timer

(Optional) Forwarder secondary timer

sg_fwd_ttl

(Optional) Forwarder ttl

sg_fwd_ttr

(Optional) Forwarder ttr

sg_fwd_pre

(Optional) Forwarder preemption enabled

sg_fwd_pre_min_delay

(Optional) Forwarder preempt min delay

sg_fwd_is_pre_min_run

(Optional) Is Forwarder preempt min running

sg_fwd_pre_min_val

(Optional) Forwarder preempt min value

sg_fwd_active_router

(Optional) Forwarder active router address

sg_fwd_active_router_attr

(Optional) Forwarder active router attribute

sg_fwd_weighting

(Optional) Forwarder weighting

sg_fwd_active_addr

(Optional) Forwarder active address

sg_fwd_active_prio

(Optional) Forwarder active priority

sg_fwd_active_prio_attr

(Optional) Forwarder priority attribute

sg_fwd_active_prio_weight_attr

(Optional) Forwarder priority weight attribute

sg_fwd_active_timer_val

(Optional) Forwarder active timer val

sg_fwd_arp_replies

(Optional) Forwarder arp replies

sg_fwd_redirection

(Optional) Forwarder redirection string

sg_fwd_preempt

(Optional) Forwarder preemption string

sg_fwd_end

(Optional) Forwarder End attribute

sg_all_fwd_end

(Optional) All Forwarders End attribute

show_glbp_end

(Optional) End of Group

show

Show running system information

guestshell

Display guest shell service information

detail

(Optional) Detailed guest shell service information

__readonly__

(Optional) Read Only

TABLE_detail

(Optional) Virtual service detail table

name

(Optional) Virtual service name

package_name

(Optional) Virtual service package name

application_name

(Optional) Name of the application

application_version

(Optional) Version of the application

application_description

(Optional) Description of the application

key_type

(Optional) Virtual service key type

signing_method

(Optional) Method used to sign the package

licensing_name

(Optional) Name of the license

licensing_version

(Optional) Version of the license

ova_path

(Optional) Virtual service OVA path

state

(Optional) Virtual service state

disk_reservation

(Optional) Virtual service disk reservation

memory_reservation

(Optional) Virtual service memory reservation

cpu_reservation

(Optional) Virtual service CPU reservation

TABLE_attached_devices

(Optional) Attached devices table

type

(Optional) Type of the attached device

name

(Optional) Name of the attached device

alias

(Optional) Alias for the attached device