I Show Commands

show ieth-header-decode

show ieth-header-decode <ieth>

Syntax Description

show

Show running system information

ieth-header-decode

Show decode of ieth header

ieth

ieth header in hex (0xFF...) or string (FF..) form

Command Mode

  • /exec

show imp client

show imp client

Syntax Description

show

Show running system information

imp

ipsec management process

client

Show ipsec clients name

Command Mode

  • /exec

show imp client sa

show imp client sa

Syntax Description

show

Show running system information

imp

IPSec management process

client

IMP clinet

sa

Display all SAs

Command Mode

  • /exec

show incompatibility-all system

show incompatibility-all { system <uri0> | nxos <uri1> } [ __readonly__ { [ TABLE_incompat_all <Str1> [ <Serv> ] [ <Cap> ] [ <Desc> ] [ <Req> ] [ <Enable> ] ] [ <Dynamic> ] } ]

Syntax Description

show

Show running system information

incompatibility-all

Show incompatible configurations for the entire system

system

show incompatibilities with an image

uri0

Enter image uri

nxos

show incompatibilities with an image

uri1

Enter image uri

__readonly__

(Optional)

TABLE_incompat_all

(Optional) Show incompatibility system table

Str1

(Optional)

Serv

(Optional)

Cap

(Optional)

Desc

(Optional)

Req

(Optional)

Enable

(Optional)

Dynamic

(Optional)

Command Mode

  • /exec

show incompatibility system

show incompatibility { system <uri0> | nxos <uri1> } [ __readonly__ { [ TABLE_incompat <Str1> [ <Serv> ] [ <Cap> ] [ <Desc> ] [ <Req> ] [ <Enable> ] ] [ <Dynamic> ] } ]

Syntax Description

show

Show running system information

incompatibility

Show incompatible configurations

system

show incompatibilities with an image

uri0

Enter image uri

nxos

show incompatibilities with an image

uri1

Enter image uri

__readonly__

(Optional)

TABLE_incompat

(Optional) Show incompatibility system table

Str1

(Optional)

Serv

(Optional)

Cap

(Optional)

Desc

(Optional)

Req

(Optional)

Enable

(Optional)

Dynamic

(Optional)

Command Mode

  • /exec

show install

show install { inactive | active [ brief ] | committed } [ __readonly__ { <curr_nxos_image> [ TABLE_smu_list <install_smu_id> + ] [ TABLE_package_list <package_id> ] } ]

Syntax Description

show

Show running system information

install

Install related show commands

inactive

Inactive packages

active

Active packages

brief

(Optional) Brief

committed

Committed packages

__readonly__

(Optional)

curr_nxos_image

(Optional) NXOS image

TABLE_smu_list

(Optional)

install_smu_id

(Optional) install operation smu identifier

TABLE_package_list

(Optional)

package_id

(Optional) Package name

Command Mode

  • /exec

show install all failed-standby

show install all failed-standby [ __readonly__ { [ TABLE_installFailStandby <Str1> ] } ]

Syntax Description

show

Show running system information

install

Show the software install impact between two images

all

Show install all information

failed-standby

show log from failed standby

__readonly__

(Optional)

TABLE_installFailStandby

(Optional) Install failed-standby table

Str1

(Optional)

Command Mode

  • /exec

show install all failure-reason

show install all failure-reason [ __readonly__ { [ TABLE_installFailReason <installFailReasonStr> ] } ]

Syntax Description

show

Show running system information

install

Show the software install impact between two images

all

show install all information

failure-reason

Show failure reason for the last install all

__readonly__

(Optional)

TABLE_installFailReason

(Optional) Install failure-reason table

installFailReasonStr

(Optional)

Command Mode

  • /exec

show install all impact

show install all impact [ nxos <uri> ] + [ non-disruptive ]

Syntax Description

show

Show running system information

install

Show the software install impact between two images

all

show install all information

impact

show impact of the install all command

nxos

(Optional) boot-variable name

uri

(Optional) Enter image uri

non-disruptive

(Optional) non-disruptive show install

Command Mode

  • /exec

show install all impact epld

show install all impact epld <uri1>

Syntax Description

show

Show running system information

install

Show the software install status

all

show install all information

impact

show impact of the install all epld command

epld

Show EPLD install information

uri1

Local URI containing EPLD Image

Command Mode

  • /exec

show install all status

show install all status

Syntax Description

show

Show running system information

install

Show the software install impact between two images

all

show install all information

status

show status of the current or last install all

Command Mode

  • /exec

show install epld status

show install epld status

Syntax Description

show

Show running system information

install

Show the software install status

epld

Show EPLD install information

status

Show status of previous EPLD upgrades

Command Mode

  • /exec

show install impact

show install impact <uri0> <uri1>

Syntax Description

show

Show running system information

install

Show the software install impact between two images

impact

impact system_uri {active_system_uri/active_kickstart_uri}

uri0

Enter system URI

uri1

Enter active URI

Command Mode

  • /exec

show install impact

show install impact <uri0>

Syntax Description

show

Show running system information

install

Show the software install impact between two images

impact

impact system_uri {active_system_uri/active_kickstart_uri}

uri0

Enter system URI

Command Mode

  • /exec

show install impact detail

show install impact <uri0> detail

Syntax Description

show

Show running system information

install

Show the software install impact between two images

impact

impact system_uri {active_system_uri/active_kickstart_uri}

uri0

Enter system URI

detail

Show detailed install impact of given system image

Command Mode

  • /exec

show install log

show install log { [ <id> | from <id1> ] [ detail ] [ reverse ] | [ last ] } [ __readonly__ { current_time <curr_time> [ TABLE_show_log_output <install_id> <install_log_entry> + ] } ]

Syntax Description

show

Show running system information

install

Install related show commands

log

log

id

(Optional) Install Identifies

from

(Optional) Starting at this install identifier

id1

(Optional) Install Identifier

detail

(Optional) Detailed information including impacted processes

reverse

(Optional) Displays the logs in reverse order

last

(Optional) Display the logs for last install operation

__readonly__

(Optional)

current_time

(Optional) current time

curr_time

(Optional) current time

TABLE_show_log_output

(Optional)

install_id

(Optional) install operation id

install_log_entry

(Optional) install log entry

Command Mode

  • /exec

show install packages

show install packages [ __readonly__ { <curr_nxos_image> [ TABLE_package_list <package_name> <version> <state> ] } ]

Syntax Description

show

Show running system information

install

Install related show commands

packages

All packages

__readonly__

(Optional)

curr_nxos_image

(Optional) NXOS image

TABLE_package_list

(Optional)

package_name

(Optional) Package name

version

(Optional) Package version

state

(Optional) package state

Command Mode

  • /exec

show install patches

show install patches [ __readonly__ { <curr_nxos_image> [ TABLE_smu_list <install_smu_id> <install_smu_state> [ TABLE_module_list <install_modno> <install_mod_smu_state> ] ] } ]

Syntax Description

show

Show running system information

install

Install related show commands

patches

All Patches

__readonly__

(Optional)

TABLE_smu_list

(Optional)

curr_nxos_image

(Optional) NXOS image

install_smu_id

(Optional) install operation smu identifier

install_smu_state

(Optional) install operation smu state

TABLE_module_list

(Optional)

install_modno

(Optional) install operation module number

install_mod_smu_state

(Optional) install operation module state

Command Mode

  • /exec

show interface

show interface <ifeth> [ quick ] [ __readonly__ TABLE_interface <interface> <state> [ <state_rsn_desc> ] [ <state_rsn> ] [ <eth_rsn_fac> ] [ <eth_rsn_code> ] [ <admin_state> ] [ <share_state> ] [ <parent_interface> ] [ <vpc_status> ] [ <eth_bundle> ] [ <eth_hw_desc> ] [ <eth_hw_addr> ] [ <eth_bia_addr> ] [ <desc> ] [ <eth_ip_addr> ] [ <eth_ip_mask> ] [ <eth_ip_prefix> ] [ <eth_mtu> ] [ <eth_bw> ] [ <eth_dly> ] [ <eth_reliability> ] [ <eth_txload> ] [ <eth_rxload> ] [ <eth_encap_vlan> ] [ <medium> ] [ <eth_mode> ] [ <eth_duplex> ] [ <eth_speed> ] [ <eth_media> ] [ <eth_beacon> ] [ <eth_autoneg> ] [ <eth_in_flowctrl> ] [ <eth_out_flowctrl> ] [ <eth_mdix> ] [ <eth_ratemode> ] [ <eth_swt_monitor> ] [ <eth_ethertype> ] [ <eth_eee_state> ] [ <eth_admin_fec_state> ] [ <eth_oper_fec_state> ] [ <eth_members> ] [ <eth_link_flapped> ] [ <eth_clear_counters> ] [ <eth_reset_cntr> ] [ <eth_load_interval1_rx> ] [ <eth_inrate1_bits> ] [ <eth_inrate1_pkts> ] [ <eth_load_interval1_tx> ] [ <eth_outrate1_bits> ] [ <eth_outrate1_pkts> ] [ <eth_inrate1_summary_bits> ] [ <eth_inrate1_summary_pkts> ] [ <eth_outrate1_summary_bits> ] [ <eth_outrate1_summary_pkts> ] [ <eth_load_interval2_rx> ] [ <eth_inrate2_bits> ] [ <eth_inrate2_pkts> ] [ <eth_load_interval2_tx> ] [ <eth_outrate2_bits> ] [ <eth_outrate2_pkts> ] [ <eth_inrate2_summary_bits> ] [ <eth_inrate2_summary_pkts> ] [ <eth_outrate2_summary_bits> ] [ <eth_outrate2_summary_pkts> ] [ <eth_load_interval3_rx> ] [ <eth_inrate3_bits> ] [ <eth_inrate3_pkts> ] [ <eth_load_interval3_tx> ] [ <eth_outrate3_bits> ] [ <eth_outrate3_pkts> ] [ <eth_inrate3_summary_bits> ] [ <eth_inrate3_summary_pkts> ] [ <eth_outrate3_summary_bits> ] [ <eth_outrate3_summary_pkts> ] [ <eth_l2_ucastpkts> ] [ <eth_l2_ucastbytes> ] [ <eth_l2_mcastpkts> ] [ <eth_l2_mcastbytes> ] [ <eth_l2_bcastpkts> ] [ <eth_l2_bcastbytes> ] [ <eth_l3in_routed_pkts> ] [ <eth_l3in_routed_bytes> ] [ <eth_l3out_routed_pkts> ] [ <eth_l3out_routed_bytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_ucastbytes> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_mcastbytes> ] [ <eth_l3in_bcastpkts> ] [ <eth_l3in_bcastbytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_ucastbytes> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_mcastbytes> ] [ <eth_l3out_bcastpkts> ] [ <eth_l3out_bcastbytes> ] [ <eth_l3avg1_inbytes> ] [ <eth_l3avg1_inpkts> ] [ <eth_l3avg1_outbytes> ] [ <eth_l3avg1_outpkts> ] [ <eth_inucast> ] [ <eth_inmcast> ] [ <eth_inbcast> ] [ <eth_inpkts> ] [ <eth_inbytes> ] [ <eth_jumbo_inpkts> ] [ <eth_storm_supp> ] [ <eth_runts> ] [ <eth_giants> ] [ <eth_crc> ] [ <eth_nobuf> ] [ <eth_inerr> ] [ <eth_frame> ] [ <eth_overrun> ] [ <eth_underrun> ] [ <eth_ignored> ] [ <eth_watchdog> ] [ <eth_bad_eth> ] [ <eth_bad_proto> ] [ <eth_in_ifdown_drops> ] [ <eth_dribble> ] [ <eth_indiscard> ] [ <eth_inpause> ] [ <eth_outucast> ] [ <eth_outmcast> ] [ <eth_outbcast> ] [ <eth_outpkts> ] [ <eth_outbytes> ] [ <eth_jumbo_outpkts> ] [ <eth_outerr> ] [ <eth_coll> ] [ <eth_deferred> ] [ <eth_latecoll> ] [ <eth_lostcarrier> ] [ <eth_nocarrier> ] [ <eth_babbles> ] [ <eth_outdiscard> ] [ <eth_outpause> ] <switchport> ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifeth

Enter interface type and number in module/slot format

quick

(Optional) Show info of interface skipping stats

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

state

(Optional) Interface state

state_rsn_desc

(Optional) Interface state reason detailed

state_rsn

(Optional) Interface state reason

eth_rsn_fac

(Optional) State reason facility

eth_rsn_code

(Optional) State reason code

admin_state

(Optional) admin state

share_state

(Optional) Interface ownership

parent_interface

(Optional) parent interface

vpc_status

(Optional) VPC status

eth_bundle

(Optional) Belongs to bundle

eth_hw_desc

(Optional) HW description

eth_hw_addr

(Optional) HW address

eth_bia_addr

(Optional) bia address

desc

(Optional) Interface description

eth_ip_addr

(Optional) IP Address

eth_ip_mask

(Optional) IP address mask

eth_ip_prefix

(Optional) IP address prefix

eth_mtu

(Optional) MTU

eth_bw

(Optional) Bandwidth

eth_dly

(Optional) Delay

eth_reliability

(Optional) Reliability

eth_txload

(Optional) Tx load

eth_rxload

(Optional) Rx load

eth_encap_vlan

(Optional) Encapsulation Vlan

medium

(Optional) medium type

eth_mode

(Optional) Port mode

eth_duplex

(Optional) Duplex

eth_speed

(Optional) Speed

eth_media

(Optional) Media type

eth_beacon

(Optional) Beacon

eth_autoneg

(Optional) Autonegotiation

eth_in_flowctrl

(Optional) Input flowcontrol

eth_out_flowctrl

(Optional) Output flowcontrol

eth_mdix

(Optional) Mdix

eth_ratemode

(Optional) Rate mode

eth_swt_monitor

(Optional) Switchport Monitor

eth_ethertype

(Optional) EtherType

eth_eee_state

(Optional) EEE state

eth_admin_fec_state

(Optional) Admin FEC state

eth_oper_fec_state

(Optional) Oper FEC state

eth_members

(Optional) Members in this channel

eth_link_flapped

(Optional) Last link flapped

eth_clear_counters

(Optional) Last clearing of show interface counters

eth_reset_cntr

(Optional) Interface resets

eth_load_interval1_rx

(Optional) interval 1 timer value in sec

eth_inrate1_bits

(Optional) interval 1 input rate bits/sec

eth_inrate1_pkts

(Optional) interval 1 input rate pkts/sec

eth_load_interval1_tx

(Optional) interval 1 timer value in sec

eth_outrate1_bits

(Optional) interval 1 output rate bits/sec

eth_outrate1_pkts

(Optional) interval 1 output rate pkts/sec

eth_inrate1_summary_bits

(Optional) interval 1 input rate bit summary

eth_inrate1_summary_pkts

(Optional) interval 1 input rate pkt summary

eth_outrate1_summary_bits

(Optional) interval 1 output rate bit summary

eth_outrate1_summary_pkts

(Optional) interval 1 output rate pkt summary

eth_load_interval2_rx

(Optional) interval 2 timer value in sec

eth_inrate2_bits

(Optional) interval 2 input rate bits/sec

eth_inrate2_pkts

(Optional) interval 2 input rate pkts/sec

eth_load_interval2_tx

(Optional) interval 2 timer value in sec

eth_outrate2_bits

(Optional) interval 2 output rate bits/sec

eth_outrate2_pkts

(Optional) interval 2 output rate pkts/sec

eth_inrate2_summary_bits

(Optional) interval 2 input rate bit summary

eth_inrate2_summary_pkts

(Optional) interval 2 input rate pkt summary

eth_outrate2_summary_bits

(Optional) interval 2 output rate bit summary

eth_outrate2_summary_pkts

(Optional) interval 2 output rate pkt summary

eth_load_interval3_rx

(Optional) interval 3 timer value in sec

eth_inrate3_bits

(Optional) interval 3 input rate bits/sec

eth_inrate3_pkts

(Optional) interval 3 input rate pkts/sec

eth_load_interval3_tx

(Optional) interval 3 timer value in sec

eth_outrate3_bits

(Optional) interval 3 output rate bits/sec

eth_outrate3_pkts

(Optional) interval 3 output rate pkts/sec

eth_inrate3_summary_bits

(Optional) interval 3 input rate bit summary

eth_inrate3_summary_pkts

(Optional) interval 3 input rate pkt summary

eth_outrate3_summary_bits

(Optional) interval 3 output rate bit summary

eth_outrate3_summary_pkts

(Optional) interval 3 output rate pkt summary

eth_l2_ucastpkts

(Optional) L2 switched ucast pkts

eth_l2_ucastbytes

(Optional) L2 switched ucast bytes

eth_l2_mcastpkts

(Optional) L2 switched mcast pkts

eth_l2_mcastbytes

(Optional) L2 switched mcast bytes

eth_l2_bcastpkts

(Optional) L2 switched bcast pkts

eth_l2_bcastbytes

(Optional) L2 switched bcast bytes

eth_l3in_ucastpkts

(Optional) L3 in switched ucast pkts

eth_l3in_ucastbytes

(Optional) L3 in switched ucast bytes

eth_l3in_mcastpkts

(Optional) L3 in switched mcast pkts

eth_l3in_mcastbytes

(Optional) L3 in switched mcast bytes

eth_l3in_bcastpkts

(Optional) L3 in switched bcast pkts

eth_l3in_bcastbytes

(Optional) L3 in switched bcast bytes

eth_l3out_ucastpkts

(Optional) L3 out switched ucast pkts

eth_l3out_ucastbytes

(Optional) L3 out switched ucast bytes

eth_l3out_mcastpkts

(Optional) L3 out switched mcast pkts

eth_l3out_mcastbytes

(Optional) L3 out switched mcast bytes

eth_l3out_bcastpkts

(Optional) L3 out switched bcast pkts

eth_l3out_bcastbytes

(Optional) L3 out switched bcast bytes

eth_l3in_routed_pkts

(Optional) L3 in routed pkts

eth_l3in_routed_bytes

(Optional) L3 in routed bytes

eth_l3out_routed_pkts

(Optional) L3 out routed pkts

eth_l3out_routed_bytes

(Optional) L3 out routed bytes

eth_l3avg1_inbytes

(Optional) Load interval 1 L3 average in switched bytes

eth_l3avg1_inpkts

(Optional) Load interval 1 L3 average in switched pkts

eth_l3avg1_outbytes

(Optional) Load interval 1 L3 average out switched bytes

eth_l3avg1_outpkts

(Optional) Load interval 1 L3 average out switched pkts

eth_inucast

(Optional) Unicasts

eth_inmcast

(Optional) Multicasts

eth_inbcast

(Optional) Broadcasts

eth_inpkts

(Optional) Packets input

eth_inbytes

(Optional) Bytes input

eth_jumbo_inpkts

(Optional) Incoming jumbo pkts

eth_storm_supp

(Optional) storm suppression

eth_runts

(Optional) runts

eth_giants

(Optional) giants

eth_crc

(Optional) CRC

eth_nobuf

(Optional) No buffer received

eth_inerr

(Optional) input errors

eth_frame

(Optional) frame

eth_overrun

(Optional) overrun

eth_underrun

(Optional) underruns

eth_ignored

(Optional) ignored

eth_watchdog

(Optional) watchdog

eth_bad_eth

(Optional) bad ether type drop

eth_bad_proto

(Optional) bad protocol drops

eth_in_ifdown_drops

(Optional) Input if-down drops

eth_dribble

(Optional) input packets with dribble condition

eth_indiscard

(Optional) discards

eth_inpause

(Optional) pause input

eth_outucast

(Optional) Unicasts

eth_outmcast

(Optional) Multicasts

eth_outbcast

(Optional) Broadcasts

eth_outpkts

(Optional) packets output

eth_outbytes

(Optional) bytes output

eth_jumbo_outpkts

(Optional) Outgoing jumbo pkts

eth_outerr

(Optional) output errors

eth_coll

(Optional) collisions

eth_deferred

(Optional) deferred

eth_latecoll

(Optional) late collision

eth_lostcarrier

(Optional) lost carrier

eth_nocarrier

(Optional) no carrier

eth_babbles

(Optional) babbles

eth_outdiscard

(Optional) output discard

eth_outpause

(Optional) PAUSE output

switchport

(Optional) Switchport enabled

Command Mode

  • /exec

show interface

show interface <ifid> [ brief | quick ] [ __readonly__ TABLE_interface <interface> [ <desc> ] [ <svi_if_index> ] [ <svi_admin_state> ] [ <oper_state> ] [ <svi_rsn_desc> ] [ <svi_line_proto> ] [ <svi_hw> ] [ <svi_mac> ] [ <svi_desc> ] [ <svi_ip_addr> ] [ <svi_ip_mask> ] [ <svi_mtu> ] [ <svi_bw> ] [ <svi_delay> ] [ <vlan_id> ] [ <type> ] [ <svi_tx_load> ] [ <svi_rx_load> ] [ <svi_carrier_delay_sec> ] [ <svi_carrier_delay_msec> ] [ <svi_arp_type> ] [ <svi_arp_timeout> ] [ <svi_time_last_cleared> ] { [ TABLE_sec_vlan ] [ <sec_vlan> ] [ <sec_vlan_type> ] } [ <eth_load_interval1_rx> ] [ <eth_inrate1_bits> ] [ <eth_inrate1_pkts> ] [ <eth_load_interval1_tx> ] [ <eth_outrate1_bits> ] [ <eth_outrate1_pkts> ] [ <eth_inrate1_summary_bits> ] [ <eth_inrate1_summary_pkts> ] [ <eth_outrate1_summary_bits> ] [ <eth_outrate1_summary_pkts> ] [ <eth_load_interval2_rx> ] [ <eth_inrate2_bits> ] [ <eth_inrate2_pkts> ] [ <eth_load_interval2_tx> ] [ <eth_outrate2_bits> ] [ <eth_outrate2_pkts> ] [ <eth_inrate2_summary_bits> ] [ <eth_inrate2_summary_pkts> ] [ <eth_outrate2_summary_bits> ] [ <eth_outrate2_summary_pkts> ] [ <eth_load_interval3_rx> ] [ <eth_inrate3_bits> ] [ <eth_inrate3_pkts> ] [ <eth_load_interval3_tx> ] [ <eth_outrate3_bits> ] [ <eth_outrate3_pkts> ] [ <eth_inrate3_summary_bits> ] [ <eth_inrate3_summary_pkts> ] [ <eth_outrate3_summary_bits> ] [ <eth_outrate3_summary_pkts> ] [ <eth_l2_ucastpkts> ] [ <eth_l2_ucastbytes> ] [ <eth_l2_mcastpkts> ] [ <eth_l2_mcastbytes> ] [ <eth_l2_bcastpkts> ] [ <eth_l2_bcastbytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_ucastbytes> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_mcastbytes> ] [ <eth_l3in_bcastpkts> ] [ <eth_l3in_bcastbytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_ucastbytes> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_mcastbytes> ] [ <eth_l3out_bcastpkts> ] [ <eth_l3out_bcastbytes> ] [ <eth_l3in_routed_pkts> ] [ <eth_l3in_routed_bytes> ] [ <eth_l3out_routed_pkts> ] [ <eth_l3out_routed_bytes> ] [ <eth_l3avg1_inbytes> ] [ <eth_l3avg1_inpkts> ] [ <eth_l3avg1_outbytes> ] [ <eth_l3avg1_outpkts> ] [ <eth_l3avg2_inbytes> ] [ <eth_l3avg2_inpkts> ] [ <eth_l3avg2_outbytes> ] [ <eth_l3avg2_outpkts> ] [ <eth_l3avg3_inbytes> ] [ <eth_l3avg3_inpkts> ] [ <eth_l3avg3_outbytes> ] [ <eth_l3avg3_outpkts> ] [ <eth_inpkts> ] [ <eth_inbytes> ] [ <eth_nobuf> ] [ <eth_inbcast> ] [ <eth_inmcast> ] [ <eth_inucast> ] [ <eth_ingiants> ] [ <eth_ipmcast> ] [ <eth_inhw_switched> ] [ <eth_insw_switched> ] [ <eth_runts> ] [ <eth_storm_supp> ] [ <eth_throtles> ] [ <eth_inerr> ] [ <eth_crc> ] [ <eth_ecc> ] [ <eth_frame> ] [ <eth_overrun> ] [ <eth_ignored> ] [ <eth_watchdog> ] [ <eth_outbcast> ] [ <eth_outmcast> ] [ <eth_outucast> ] [ <eth_outgiants> ] [ <eth_inpause> ] [ <eth_dribble> ] [ <eth_in_ifdown_drops> ] [ <eth_bad_eth> ] [ <eth_bad_proto> ] [ <eth_outpkts> ] [ <eth_outbytes> ] [ <eth_underrun> ] [ <eth_outhw_switched> ] [ <eth_outsw_switched> ] [ <eth_outerr> ] [ <eth_coll> ] [ <eth_resets> ] [ <eth_babbles> ] [ <eth_latecoll> ] [ <eth_deferred> ] [ <eth_lostcarrier> ] [ <eth_nocarrier> ] [ <eth_outpause> ] [ <eth_buffail> ] [ <eth_bufswapped> ] [ <eth_arpdrops> ] [ <eth_out_ifdown_drops> ] [ <eth_single_coll> ] [ <eth_multi_coll> ] [ <eth_excess_coll> ] [ <eth_jabbers> ] [ <eth_shortframe> ] [ <eth_indiscard> ] [ <eth_bad_encap> ] [ <eth_outcrc> ] [ <eth_symbol> ] [ <eth_out_drops> ] [ <eth_sqetest> ] [ <eth_inb64> ] [ <eth_inb65_127> ] [ <eth_inb128_255> ] [ <eth_inb256_511> ] [ <eth_inb512_1023> ] [ <eth_inb1024_1518> ] [ <eth_inb1519_1548> ] [ <eth_intrunk> ] [ <eth_outb64> ] [ <eth_outb65_127> ] [ <eth_outb128_255> ] [ <eth_outb256_511> ] [ <eth_outb512_1023> ] [ <eth_outb1024_1518> ] [ <eth_outb1519_1548> ] [ <eth_outtrunk> ] [ <eth_bpdu_outlost> ] [ <eth_cos0_outlost> ] [ <eth_cos1_outlost> ] [ <eth_cos2_outlost> ] [ <eth_cos3_outlost> ] [ <eth_cos4_outlost> ] [ <eth_cos5_outlost> ] [ <eth_cos6_outlost> ] [ <eth_cos7_outlost> ] [ <eth_fcoe_in_pkts> ] [ <eth_fcoe_in_octets> ] [ <eth_fcoe_out_pkts> ] [ <eth_fcoe_out_octets> ] [ <eth_nfcoe_in_pkts> ] [ <eth_nfcoe_in_octets> ] [ <eth_nfcoe_out_pkts> ] [ <eth_nfcoe_out_octets> ] [ <eth_eee_atx_lpi_msec> ] [ <eth_eee_arcv_lpi_msec> ] [ <eth_eee_atx_lpi_transitions> ] [ <eth_eee_arcv_lpi_transitions> ] [ <eth_phy_ber_count> ] [ <eth_phy_errblks_count> ] [ <svi_routed_pkts_in> ] [ <svi_routed_bytes_in> ] [ <svi_routed_pkts_out> ] [ <svi_routed_bytes_out> ] [ <svi_ucast_pkts_in> ] [ <svi_ucast_bytes_in> ] [ <svi_mcast_pkts_in> ] [ <svi_mcast_bytes_in> ] [ <svi_ucast_pkts_out> ] [ <svi_ucast_bytes_out> ] [ <svi_mcast_pkts_out> ] [ <svi_mcast_bytes_out> ] [ <svi_ipv4_ucast_pkts_in> ] [ <svi_ipv4_ucast_bytes_in> ] [ <svi_ipv4_ucast_pkts_out> ] [ <svi_ipv4_ucast_bytes_out> ] [ <svi_ipv4_mcast_pkts_in> ] [ <svi_ipv4_mcast_bytes_in> ] [ <svi_ipv4_mcast_pkts_out> ] [ <svi_ipv4_mcast_bytes_out> ] [ <svi_ipv6_ucast_pkts_in> ] [ <svi_ipv6_ucast_bytes_in> ] [ <svi_ipv6_ucast_pkts_out> ] [ <svi_ipv6_ucast_bytes_out> ] [ <svi_ipv6_mcast_pkts_in> ] [ <svi_ipv6_mcast_bytes_in> ] [ <svi_ipv6_mcast_pkts_out> ] [ <svi_ipv6_mcast_bytes_out> ] [ <svi_average_input_bits> ] [ <svi_average_input_packets> ] [ <svi_average_output_bits> ] [ <svi_average_output_packets> ] [ <svi_rate_in_mins> ] [ <svi_reliability> ] <switchport> ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifid

Enter interface type and number in module/slot format

brief

(Optional) Show brief info of interface

quick

(Optional) Show info of interface skipping stats

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

desc

(Optional) Interface description

switchport

(Optional) Switchport enabled

svi_if_index

(Optional) Interface

svi_admin_state

(Optional)

oper_state

(Optional)

svi_rsn_desc

(Optional) Interface state reason detailed

svi_line_proto

(Optional)

svi_hw

(Optional) Hardware

svi_mac

(Optional) Address

svi_desc

(Optional) Interface Description

svi_ip_addr

(Optional) IP Address

svi_ip_mask

(Optional) IP address mask

svi_mtu

(Optional) MTU size in bytes

svi_bw

(Optional) Bandwidth in kilobits

svi_delay

(Optional) Throughput delay (tens of microseconds)

vlan_id

(Optional) Vlan

type

(Optional) type

svi_tx_load

(Optional) Tx Load

svi_rx_load

(Optional) Rx Load

svi_carrier_delay_sec

(Optional) carrier delay value in seconds

svi_carrier_delay_msec

(Optional) carrier delay value in milli-seconds

svi_arp_type

(Optional) ARP type

svi_arp_timeout

(Optional) ARP timeout value

svi_time_last_cleared

(Optional) Time last cleared

TABLE_sec_vlan

(Optional) secondary vlans

sec_vlan

(Optional) vlan id

sec_vlan_type

(Optional) secondary vlan type

eth_load_interval1_rx

(Optional) interval 1 timer value in sec

eth_inrate1_bits

(Optional) interval 1 input rate bits/sec

eth_inrate1_pkts

(Optional) interval 1 input rate pkts/sec

eth_load_interval1_tx

(Optional) interval 1 timer value in sec

eth_outrate1_bits

(Optional) interval 1 output rate bits/sec

eth_outrate1_pkts

(Optional) interval 1 output rate pkts/sec

eth_inrate1_summary_bits

(Optional) interval 1 input rate bit summary

eth_inrate1_summary_pkts

(Optional) interval 1 input rate pkt summary

eth_outrate1_summary_bits

(Optional) interval 1 output rate bit summary

eth_outrate1_summary_pkts

(Optional) interval 1 output rate pkt summary

eth_load_interval2_rx

(Optional) interval 2 timer value in sec

eth_inrate2_bits

(Optional) interval 2 input rate bits/sec

eth_inrate2_pkts

(Optional) interval 2 input rate pkts/sec

eth_load_interval2_tx

(Optional) interval 2 timer value in sec

eth_outrate2_bits

(Optional) interval 2 output rate bits/sec

eth_outrate2_pkts

(Optional) interval 2 output rate pkts/sec

eth_inrate2_summary_bits

(Optional) interval 2 input rate bit summary

eth_inrate2_summary_pkts

(Optional) interval 2 input rate pkt summary

eth_outrate2_summary_bits

(Optional) interval 2 output rate bit summary

eth_outrate2_summary_pkts

(Optional) interval 2 output rate pkt summary

eth_load_interval3_rx

(Optional) interval 3 timer value in sec

eth_inrate3_bits

(Optional) interval 3 input rate bits/sec

eth_inrate3_pkts

(Optional) interval 3 input rate pkts/sec

eth_load_interval3_tx

(Optional) interval 3 timer value in sec

eth_outrate3_bits

(Optional) interval 3 output rate bits/sec

eth_outrate3_pkts

(Optional) interval 3 output rate pkts/sec

eth_inrate3_summary_bits

(Optional) interval 3 input rate bit summary

eth_inrate3_summary_pkts

(Optional) interval 3 input rate pkt summary

eth_outrate3_summary_bits

(Optional) interval 3 output rate bit summary

eth_outrate3_summary_pkts

(Optional) interval 3 output rate pkt summary

eth_l2_ucastpkts

(Optional) L2 switched ucast pkts

eth_l2_ucastbytes

(Optional) L2 switched ucast bytes

eth_l2_mcastpkts

(Optional) L2 switched mcast pkts

eth_l2_mcastbytes

(Optional) L2 switched mcast bytes

eth_l2_bcastpkts

(Optional) L2 switched bcast pkts

eth_l2_bcastbytes

(Optional) L2 switched bcast bytes

eth_l3in_ucastpkts

(Optional) IPv4 L3 in switched ucast pkts

eth_l3in_ucastbytes

(Optional) IPv4 L3 in switched ucast bytes

eth_l3in_mcastpkts

(Optional) IPv4 L3 in switched mcast pkts

eth_l3in_mcastbytes

(Optional) IPv4 L3 in switched mcast bytes

eth_l3in_bcastpkts

(Optional) L3 in switched bcast pkts

eth_l3in_bcastbytes

(Optional) L3 in switched bcast bytes

eth_l3out_ucastpkts

(Optional) IPv4 L3 out switched ucast pkts

eth_l3out_ucastbytes

(Optional) IPv4 L3 out switched ucast bytes

eth_l3out_mcastpkts

(Optional) IPv4 L3 out switched mcast pkts

eth_l3out_mcastbytes

(Optional) IPv4 L3 out switched mcast bytes

eth_l3out_bcastpkts

(Optional) L3 out switched bcast pkts

eth_l3out_bcastbytes

(Optional) L3 out switched bcast bytes

eth_l3in_routed_pkts

(Optional) L3 in routed pkts

eth_l3in_routed_bytes

(Optional) L3 in routed bytes

eth_l3out_routed_pkts

(Optional) L3 out routed pkts

eth_l3out_routed_bytes

(Optional) L3 out routed bytes

eth_l3avg1_inbytes

(Optional) Load interval 1 L3 average in switched bytes

eth_l3avg1_inpkts

(Optional) Load interval 1 L3 average in switched pkts

eth_l3avg1_outbytes

(Optional) Load interval 1 L3 average out switched bytes

eth_l3avg1_outpkts

(Optional) Load interval 1 L3 average out switched pkts

eth_l3avg2_inbytes

(Optional) Load interval 2 L3 average in switched bytes

eth_l3avg2_inpkts

(Optional) Load interval 2 L3 average in switched pkts

eth_l3avg2_outbytes

(Optional) Load interval 2 L3 average out switched bytes

eth_l3avg2_outpkts

(Optional) Load interval 2 L3 average out switched pkts

eth_l3avg3_inbytes

(Optional) Load interval 3 L3 average in switched bytes

eth_l3avg3_inpkts

(Optional) Load interval 3 L3 average in switched pkts

eth_l3avg3_outbytes

(Optional) Load interval 3 L3 average out switched bytes

eth_l3avg3_outpkts

(Optional) Load interval 3 L3 average out switched pkts

eth_inpkts

(Optional) Packets input

eth_inbytes

(Optional) Bytes input

eth_nobuf

(Optional) No buffer received

eth_inbcast

(Optional) Broadcasts

eth_inmcast

(Optional) Multicasts

eth_inucast

(Optional) Unicasts

eth_ingiants

(Optional) giants

eth_ipmcast

(Optional) IP multicast

eth_inhw_switched

(Optional) Input H/W Switched

eth_insw_switched

(Optional) Input S/W Switched

eth_runts

(Optional) runts

eth_storm_supp

(Optional) storm suppression

eth_throtles

(Optional) throttles

eth_inerr

(Optional) input errors

eth_crc

(Optional) CRC

eth_ecc

(Optional) ECC

eth_frame

(Optional) frame

eth_overrun

(Optional) overrun

eth_ignored

(Optional) ignored

eth_watchdog

(Optional) watchdog

eth_outbcast

(Optional) Broadcasts

eth_outmcast

(Optional) Multicasts

eth_outucast

(Optional) Unicasts

eth_outgiants

(Optional) giants

eth_inpause

(Optional) pause input

eth_dribble

(Optional) input packets with dribble condition

eth_in_ifdown_drops

(Optional) Input if-down drops

eth_bad_eth

(Optional) bad ether type drop

eth_bad_proto

(Optional) bad protocol drops

eth_outpkts

(Optional) packets output

eth_outbytes

(Optional) bytes output

eth_underrun

(Optional) underruns

eth_outhw_switched

(Optional) Out H/W Switched

eth_outsw_switched

(Optional) Out S/W Switched

eth_outerr

(Optional) output errors

eth_coll

(Optional) collisions

eth_resets

(Optional) interface resets

eth_babbles

(Optional) babbles

eth_latecoll

(Optional) late collision

eth_deferred

(Optional) deferred

eth_lostcarrier

(Optional) lost carrier

eth_nocarrier

(Optional) no carrier

eth_outpause

(Optional) PAUSE output

eth_buffail

(Optional) output buffer failures

eth_bufswapped

(Optional) output buffers swapped out

eth_arpdrops

(Optional) arp drops

eth_out_ifdown_drops

(Optional) Output if-down drops

eth_single_coll

(Optional) single collisions

eth_multi_coll

(Optional) multi collisions

eth_excess_coll

(Optional) excessive collisions

eth_jabbers

(Optional) jabbers

eth_shortframe

(Optional) short frames

eth_indiscard

(Optional) discards

eth_bad_encap

(Optional) bad encapsulation

eth_outcrc

(Optional) Output CRC

eth_symbol

(Optional) symbol errors

eth_out_drops

(Optional) output drops

eth_sqetest

(Optional) SQE test

eth_inb64

(Optional) input pkts between 0 and 64 bytes

eth_inb65_127

(Optional) input pkts between 65 and 127 bytes

eth_inb128_255

(Optional) input pkts between 128 and 255 bytes

eth_inb256_511

(Optional) input pkts between 256 and 511 bytes

eth_inb512_1023

(Optional) input pkts between 512 and 1023 bytes

eth_inb1024_1518

(Optional) input pkts between 1024 and 1518 bytes

eth_inb1519_1548

(Optional) input pkts between 1519 and 1548 bytes

eth_intrunk

(Optional) input trunk pkts

eth_outb64

(Optional) output pkts between 0 and 64 bytes

eth_outb65_127

(Optional) output pkts between 65 and 127 bytes

eth_outb128_255

(Optional) output pkts between 128 and 255 bytes

eth_outb256_511

(Optional) output pkts between 256 and 511 bytes

eth_outb512_1023

(Optional) output pkts between 512 and 1023 bytes

eth_outb1024_1518

(Optional) output pkts between 1024 and 1518 bytes

eth_outb1519_1548

(Optional) output pkts between 1519 and 1548 bytes

eth_outtrunk

(Optional) output trunk pkts

eth_bpdu_outlost

(Optional) BPDU output lost

eth_cos0_outlost

(Optional) output pkts

eth_cos1_outlost

(Optional) output pkts

eth_cos2_outlost

(Optional) output pkts

eth_cos3_outlost

(Optional) output pkts

eth_cos4_outlost

(Optional) output pkts

eth_cos5_outlost

(Optional) output pkts

eth_cos6_outlost

(Optional) output pkts

eth_cos7_outlost

(Optional) output pkts

eth_fcoe_in_pkts

(Optional) fcoe in pkts

eth_fcoe_in_octets

(Optional) fcoe in octets

eth_fcoe_out_pkts

(Optional) fcoe out pkts

eth_fcoe_out_octets

(Optional) fcoe out octets

eth_nfcoe_in_pkts

(Optional) nfcoe in pkts

eth_nfcoe_in_octets

(Optional) nfcoe in octets

eth_nfcoe_out_pkts

(Optional) nfcoe out pkts

eth_nfcoe_out_octets

(Optional) nfcoe out octets

eth_eee_atx_lpi_msec

(Optional) Tx Lpi usec

eth_eee_arcv_lpi_msec

(Optional) Rx Lpi usec

eth_eee_atx_lpi_transitions

(Optional) Tx Lpi requests

eth_eee_arcv_lpi_transitions

(Optional) Rx Lpi indications

eth_phy_ber_count

(Optional) Bit error rate counter

eth_phy_errblks_count

(Optional) Errored blocks counter

svi_reliability

(Optional) Reliability

Command Mode

  • /exec

show interface

show interface <ifmgmt> [ __readonly__ TABLE_interface <interface> <state> [ <state_rsn_desc> ] [ <state_rsn> ] [ <eth_rsn_fac> ] [ <eth_rsn_code> ] [ <share_state> ] [ <eth_bundle> ] [ <eth_dce_mode> ] [ <vpc_status> ] [ <eth_hw_desc> ] [ <eth_hw_addr> ] [ <eth_bia_addr> ] [ <desc> ] [ <eth_ip_addr> ] [ <eth_ip_mask> ] [ <eth_ip_prefix> ] [ <eth_mtu> ] [ <eth_bw> ] [ <eth_encap_vlan> ] [ <eth_dly> ] [ <eth_reliability> ] [ <eth_txload> ] [ <eth_rxload> ] [ <eth_loopback> ] [ <eth_keepalive> ] [ <eth_duplex> ] [ <eth_speed> ] [ <eth_mode> ] [ <eth_ratemode> ] [ <eth_autoneg> ] [ <eth_beacon> ] [ <eth_media> ] [ <eth_in_flowctrl> ] [ <eth_out_flowctrl> ] [ <eth_mdix> ] [ <eth_swt_monitor> ] [ <eth_ethertype> ] [ <eth_members> ] [ <eth_clk_mode> ] [ <eth_arp_type> ] [ <eth_arp_timeout> ] [ <eth_last_in> ] [ <eth_last_out> ] [ <eth_out_hang> ] [ <eth_clear_counters> ] [ <eth_link_flapped> ] [ <eth_inq_size> ] [ <eth_inq_max> ] [ <eth_inq_drops> ] [ <eth_inq_flush> ] [ <eth_out_drop> ] [ <eth_q_strategy> ] [ <eth_outq_size> ] [ <eth_outq_max> ] [ <eth_reset_cntr> ] [ <mgmt_hw_desc> ] [ <mgmt_hw_addr> ] [ <mgmt_ip_addr> ] [ <mgmt_ip_mask> ] [ <mgmt_mtu> ] [ <mgmt_speed> ] [ <mgmt_duplex> ] [ <vdc_lvl_in_avg_bits> ] [ <vdc_lvl_in_avg_pkts> ] [ <vdc_lvl_out_avg_bits> ] [ <vdc_lvl_out_avg_pkts> ] [ <vdc_lvl_in_pkts> ] [ <vdc_lvl_in_ucast> ] [ <vdc_lvl_in_mcast> ] [ <vdc_lvl_in_bcast> ] [ <vdc_lvl_in_bytes> ] [ <vdc_lvl_in_bps> ] [ <vdc_lvl_in_pps> ] [ <vdc_lvl_out_pkts> ] [ <vdc_lvl_out_ucast> ] [ <vdc_lvl_out_mcast> ] [ <vdc_lvl_out_bcast> ] [ <vdc_lvl_out_bytes> ] [ <vdc_lvl_out_bps> ] [ <vdc_lvl_out_pps> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifmgmt

Enter interface type and number in module/slot format

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

state

(Optional) Interface state

state_rsn_desc

(Optional) Interface state reason detailed

state_rsn

(Optional) Interface state reason

eth_rsn_fac

(Optional) State reason facility

eth_rsn_code

(Optional) State reason code

share_state

(Optional) Interface ownership

eth_bundle

(Optional) Belongs to bundle

eth_dce_mode

(Optional) DCE mode description

vpc_status

(Optional) VPC status

eth_hw_desc

(Optional) HW description

eth_hw_addr

(Optional) HW address

eth_bia_addr

(Optional) bia address

desc

(Optional) Interface description

eth_ip_addr

(Optional) IP Address

eth_ip_mask

(Optional) IP address mask

eth_ip_prefix

(Optional) IP address prefix

eth_mtu

(Optional) MTU

eth_bw

(Optional) Bandwidth

eth_encap_vlan

(Optional) Encapsulation Vlan

eth_dly

(Optional) Delay

eth_reliability

(Optional) Reliability

eth_txload

(Optional) Tx load

eth_rxload

(Optional) Rx load

eth_loopback

(Optional) Loopback

eth_keepalive

(Optional) Keepalive

eth_duplex

(Optional) Duplex

eth_speed

(Optional) Speed

eth_mode

(Optional) Port mode

eth_ratemode

(Optional) Rate mode

eth_autoneg

(Optional) Autonegotiation

eth_beacon

(Optional) Beacon

eth_media

(Optional) Media type

eth_in_flowctrl

(Optional) Input flowcontrol

eth_out_flowctrl

(Optional) Output flowcontrol

eth_mdix

(Optional) Mdix

eth_swt_monitor

(Optional) Switchport Monitor

eth_ethertype

(Optional) EtherType

eth_members

(Optional) Members in this channel

eth_clk_mode

(Optional) Clock mode

eth_arp_type

(Optional) ARP type

eth_arp_timeout

(Optional) ARP timeout

eth_last_in

(Optional) Last input

eth_last_out

(Optional) Last output

eth_out_hang

(Optional) Last output hang

eth_clear_counters

(Optional) Last clearing of show interface counters

eth_link_flapped

(Optional) Last link flapped

eth_inq_size

(Optional) Input queue size

eth_inq_max

(Optional) Input queue max

eth_inq_drops

(Optional) Input queue drops

eth_inq_flush

(Optional) Input queue flushes

eth_out_drop

(Optional) Output drops

eth_q_strategy

(Optional) Queueing strategy

eth_outq_size

(Optional) Output queue size

eth_outq_max

(Optional) Output queue max

eth_reset_cntr

(Optional) Interface resets

mgmt_hw_desc

(Optional) HW description

mgmt_hw_addr

(Optional) HW address

mgmt_ip_addr

(Optional) IP address

mgmt_ip_mask

(Optional) IP address mask

mgmt_mtu

(Optional) MTU

mgmt_speed

(Optional) Speed

mgmt_duplex

(Optional) Duplex

vdc_lvl_in_avg_bits

(Optional) VDC level average input bits

vdc_lvl_in_avg_pkts

(Optional) VDC level average input packets

vdc_lvl_out_avg_bits

(Optional) VDC level average output bits

vdc_lvl_out_avg_pkts

(Optional) VDC level average output packets

vdc_lvl_in_pkts

(Optional) VDC level input packets

vdc_lvl_in_ucast

(Optional) VDC level input unicast packets

vdc_lvl_in_mcast

(Optional) VDC level input multicast packets

vdc_lvl_in_bcast

(Optional) VDC level input broadcast packets

vdc_lvl_in_bytes

(Optional) VDC level input bytes

vdc_lvl_in_bps

(Optional) VDC level input bytes per second

vdc_lvl_in_pps

(Optional) VDC level input packets per second

vdc_lvl_out_pkts

(Optional) VDC level output packets

vdc_lvl_out_ucast

(Optional) VDC level output unicast packets

vdc_lvl_out_mcast

(Optional) VDC level output multicast packets

vdc_lvl_out_bcast

(Optional) VDC level output broadcast packets

vdc_lvl_out_bytes

(Optional) VDC level output bytes

vdc_lvl_out_bps

(Optional) VDC level output bytes per second

vdc_lvl_out_pps

(Optional) VDC level output packets per second

Command Mode

  • /exec

show interface

show interface [ controller | quick ] [ __readonly__ TABLE_interface <interface> [ <state> ] [ <state_rsn_desc> ] [ <state_rsn> ] [ <eth_rsn_fac> ] [ <eth_rsn_code> ] [ <admin_state> ] [ <share_state> ] [ <parent_interface> ] [ <vpc_status> ] [ <eth_bundle> ] [ <eth_hw_desc> ] [ <eth_hw_addr> ] [ <eth_bia_addr> ] [ <desc> ] [ <eth_ip_addr> ] [ <eth_ip_mask> ] [ <eth_ip_prefix> ] [ <eth_mtu> ] [ <eth_bw> ] [ <eth_dly> ] [ <eth_reliability> ] [ <eth_txload> ] [ <eth_rxload> ] [ <eth_encap_vlan> ] [ <medium> ] [ <eth_mode> ] [ <eth_duplex> ] [ <eth_speed> ] [ <eth_media> ] [ <eth_beacon> ] [ <eth_autoneg> ] [ <eth_in_flowctrl> ] [ <eth_out_flowctrl> ] [ <eth_mdix> ] [ <eth_ratemode> ] [ <eth_swt_monitor> ] [ <eth_ethertype> ] [ <eth_eee_state> ] [ <eth_admin_fec_state> ] [ <eth_oper_fec_state> ] [ <eth_members> ] [ <eth_link_flapped> ] [ <eth_clear_counters> ] [ <eth_reset_cntr> ] [ <eth_load_interval1_rx> ] [ <eth_inrate1_bits> ] [ <eth_inrate1_pkts> ] [ <eth_load_interval1_tx> ] [ <eth_outrate1_bits> ] [ <eth_outrate1_pkts> ] [ <eth_inrate1_summary_bits> ] [ <eth_inrate1_summary_pkts> ] [ <eth_outrate1_summary_bits> ] [ <eth_outrate1_summary_pkts> ] [ <eth_load_interval2_rx> ] [ <eth_inrate2_bits> ] [ <eth_inrate2_pkts> ] [ <eth_load_interval2_tx> ] [ <eth_outrate2_bits> ] [ <eth_outrate2_pkts> ] [ <eth_inrate2_summary_bits> ] [ <eth_inrate2_summary_pkts> ] [ <eth_outrate2_summary_bits> ] [ <eth_outrate2_summary_pkts> ] [ <eth_load_interval3_rx> ] [ <eth_inrate3_bits> ] [ <eth_inrate3_pkts> ] [ <eth_load_interval3_tx> ] [ <eth_outrate3_bits> ] [ <eth_outrate3_pkts> ] [ <eth_inrate3_summary_bits> ] [ <eth_inrate3_summary_pkts> ] [ <eth_outrate3_summary_bits> ] [ <eth_outrate3_summary_pkts> ] [ <eth_l2_ucastpkts> ] [ <eth_l2_ucastbytes> ] [ <eth_l2_mcastpkts> ] [ <eth_l2_mcastbytes> ] [ <eth_l2_bcastpkts> ] [ <eth_l2_bcastbytes> ] [ <eth_l3in_routed_pkts> ] [ <eth_l3in_routed_bytes> ] [ <eth_l3out_routed_pkts> ] [ <eth_l3out_routed_bytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_ucastbytes> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_mcastbytes> ] [ <eth_l3in_bcastpkts> ] [ <eth_l3in_bcastbytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_ucastbytes> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_mcastbytes> ] [ <eth_l3out_bcastpkts> ] [ <eth_l3out_bcastbytes> ] [ <eth_l3avg1_inbytes> ] [ <eth_l3avg1_inpkts> ] [ <eth_l3avg1_outbytes> ] [ <eth_l3avg1_outpkts> ] [ <eth_inucast> ] [ <eth_inmcast> ] [ <eth_inbcast> ] [ <eth_inpkts> ] [ <eth_inbytes> ] [ <eth_jumbo_inpkts> ] [ <eth_storm_supp> ] [ <eth_runts> ] [ <eth_giants> ] [ <eth_crc> ] [ <eth_nobuf> ] [ <eth_inerr> ] [ <eth_frame> ] [ <eth_overrun> ] [ <eth_underrun> ] [ <eth_ignored> ] [ <eth_watchdog> ] [ <eth_bad_eth> ] [ <eth_bad_proto> ] [ <eth_in_ifdown_drops> ] [ <eth_dribble> ] [ <eth_indiscard> ] [ <eth_inpause> ] [ <eth_outucast> ] [ <eth_outmcast> ] [ <eth_outbcast> ] [ <eth_outpkts> ] [ <eth_outbytes> ] [ <eth_jumbo_outpkts> ] [ <eth_outerr> ] [ <eth_coll> ] [ <eth_deferred> ] [ <eth_latecoll> ] [ <eth_lostcarrier> ] [ <eth_nocarrier> ] [ <eth_babbles> ] [ <eth_outdiscard> ] [ <eth_outpause> ] [ <mgmt_hw_desc> ] [ <mgmt_hw_addr> ] [ <mgmt_ip_addr> ] [ <mgmt_ip_mask> ] [ <mgmt_mtu> ] [ <mgmt_speed> ] [ <mgmt_duplex> ] [ <vdc_lvl_in_avg_bits> ] [ <vdc_lvl_in_avg_pkts> ] [ <vdc_lvl_out_avg_bits> ] [ <vdc_lvl_out_avg_pkts> ] [ <vdc_lvl_in_pkts> ] [ <vdc_lvl_in_ucast> ] [ <vdc_lvl_in_mcast> ] [ <vdc_lvl_in_bcast> ] [ <vdc_lvl_in_bytes> ] [ <vdc_lvl_in_bps> ] [ <vdc_lvl_in_pps> ] [ <vdc_lvl_out_pkts> ] [ <vdc_lvl_out_ucast> ] [ <vdc_lvl_out_mcast> ] [ <vdc_lvl_out_bcast> ] [ <vdc_lvl_out_bytes> ] [ <vdc_lvl_out_bps> ] [ <vdc_lvl_out_pps> ] [ <mgmt_in_pkts> ] [ <mgmt_in_bytes> ] [ <mgmt_in_mcast> ] [ <mgmt_in_compressed> ] [ <mgmt_in_errors> ] [ <mgmt_in_frame> ] [ <mgmt_in_overrun> ] [ <mgmt_in_fifo> ] [ <mgmt_out_pkts> ] [ <mgmt_out_bytes> ] [ <mgmt_out_underruns> ] [ <mgmt_out_errors> ] [ <mgmt_out_collisions> ] [ <mgmt_out_fifo> ] [ <mgmt_out_carrier> ] [ <mgmt_align_err> ] [ <mgmt_fcs_err> ] [ <mgmt_xmit_err> ] [ <mgmt_rcv_err> ] [ <mgmt_undersize> ] [ <mgmt_outdisc> ] [ <mgmt_single_col> ] [ <mgmt_multi_col> ] [ <mgmt_late_col> ] [ <mgmt_excess_col> ] [ <mgmt_carri_sen> ] [ <mgmt_runts> ] [ <mgmt_giants> ] [ <mgmt_sqetest_err> ] [ <mgmt_deferred_tx> ] [ <mgmt_inmactx_err> ] [ <mgmt_inmacrx_err> ] [ <mgmt_symbol_err> ] [ <loop_in_pkts> ] [ <loop_in_bytes> ] [ <loop_in_mcast> ] [ <loop_in_compressed> ] [ <loop_in_errors> ] [ <loop_in_frame> ] [ <loop_in_overrun> ] [ <loop_in_fifo> ] [ <loop_out_pkts> ] [ <loop_out_bytes> ] [ <loop_out_underruns> ] [ <loop_out_errors> ] [ <loop_out_collisions> ] [ <loop_out_fifo> ] [ <loop_out_carriers> ] <admin-state> { <tunnel-ipv4> | <tunnel-ipv6> } <mtu> <bandwidth> <encap-type> <keepalive-period> <keepalive-retries> { <src-ipv4> | <src-ipv6> } <src-intf> { <dest-ipv4> | <dest-ipv6> } <dest-hostname> <vrf_name> <wccp_header> <ttl_val> <tunnel_pmtud_age_time> <tunnel_pmtud_min_mtu> <tunnel_pmtud> <tunnel_pgm_mtu> <tunnel_rx_pkt_count> <tunnel_rx_byte_count> <tunnel_rx_rate> <tunnel_tx_pkt_count> <tunnel_tx_byte_count> <tunnel_tx_rate> <tunnel_clear_counter> [ <svi_if_index> ] [ <svi_admin_state> ] [ <oper_state> ] [ <svi_rsn_desc> ] [ <svi_line_proto> ] [ <svi_hw> ] [ <svi_mac> ] [ <svi_desc> ] [ <svi_ip_addr> ] [ <svi_ip_mask> ] [ <svi_mtu> ] [ <svi_bw> ] [ <svi_delay> ] [ <vlan_id> ] [ <type> ] [ <svi_tx_load> ] [ <svi_rx_load> ] [ <svi_carrier_delay_sec> ] [ <svi_carrier_delay_msec> ] [ <svi_arp_type> ] [ <svi_arp_timeout> ] [ <svi_time_last_cleared> ] { [ TABLE_sec_vlan ] [ <sec_vlan> ] [ <sec_vlan_type> ] } [ <svi_routed_pkts_in> ] [ <svi_routed_bytes_in> ] [ <svi_routed_pkts_out> ] [ <svi_routed_bytes_out> ] [ <svi_ucast_pkts_in> ] [ <svi_ucast_bytes_in> ] [ <svi_mcast_pkts_in> ] [ <svi_mcast_bytes_in> ] [ <svi_ucast_pkts_out> ] [ <svi_ucast_bytes_out> ] [ <svi_mcast_pkts_out> ] [ <svi_mcast_bytes_out> ] [ <svi_ipv4_ucast_pkts_in> ] [ <svi_ipv4_ucast_bytes_in> ] [ <svi_ipv4_ucast_pkts_out> ] [ <svi_ipv4_ucast_bytes_out> ] [ <svi_ipv4_mcast_pkts_in> ] [ <svi_ipv4_mcast_bytes_in> ] [ <svi_ipv4_mcast_pkts_out> ] [ <svi_ipv4_mcast_bytes_out> ] [ <svi_ipv6_ucast_pkts_in> ] [ <svi_ipv6_ucast_bytes_in> ] [ <svi_ipv6_ucast_pkts_out> ] [ <svi_ipv6_ucast_bytes_out> ] [ <svi_ipv6_mcast_pkts_in> ] [ <svi_ipv6_mcast_bytes_in> ] [ <svi_ipv6_mcast_pkts_out> ] [ <svi_ipv6_mcast_bytes_out> ] [ <svi_average_input_bits> ] [ <svi_average_input_packets> ] [ <svi_average_output_bits> ] [ <svi_average_output_packets> ] [ <svi_rate_in_mins> ] [ <svi_reliability> ] [ <overlay_addr> ] [ <overlay_addr_mask> ] [ <overlay_mtu> ] [ <overlay_bandwidth> ] [ <overlay_encap_str> ] [ <overlay_vrf> ] [ <overlay_src_addr> ] [ <overlay_dst_addr> ] [ <overlay_last_link_flap> ] [ <overlay_clear_counters> ] [ <overlay_load_interval> ] [ <overlay_rx_ucastpkts> ] [ <overlay_rx_ucastbytes> ] [ <overlay_rx_mcastpkts> ] [ <overlay_rx_mcastbytes> ] [ <overlay_rx_pkts> ] [ <overlay_rx_bytes> ] [ <overlay_rx_bcastpkts> ] [ <overlay_rx_bcastbytes> ] [ <overlay_rx_bitrate> ] [ <overlay_rx_pktrate> ] [ <overlay_tx_ucastpkts> ] [ <overlay_tx_ucastbytes> ] [ <overlay_tx_mcastpkts> ] [ <overlay_tx_mcastbytes> ] [ <overlay_tx_bcastpkts> ] [ <overlay_tx_bcastbytes> ] [ <overlay_tx_pkts> ] [ <overlay_tx_bytes> ] [ <overlay_tx_bitrate> ] [ <overlay_tx_pktrate> ] <switchport> ]

Syntax Description

show

Show running system information

interface

Show interface status and information

controller

(Optional) Show controller configured interfaces

quick

(Optional) Show info of interface skipping stats

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

state

(Optional) Interface state

state_rsn_desc

(Optional) Interface state reason detailed

state_rsn

(Optional) Interface state reason

eth_rsn_fac

(Optional) State reason facility

eth_rsn_code

(Optional) State reason code

admin_state

(Optional) admin state

share_state

(Optional) Interface ownership

parent_interface

(Optional) parent interface

vpc_status

(Optional) VPC status

eth_bundle

(Optional) Belongs to bundle

eth_hw_desc

(Optional) HW description

eth_hw_addr

(Optional) HW address

eth_bia_addr

(Optional) bia address

desc

(Optional) Interface description

eth_ip_addr

(Optional) IP Address

eth_ip_mask

(Optional) IP address mask

eth_ip_prefix

(Optional) IP address prefix

eth_mtu

(Optional) MTU

eth_bw

(Optional) Bandwidth

eth_dly

(Optional) Delay

eth_reliability

(Optional) Reliability

eth_txload

(Optional) Tx load

eth_rxload

(Optional) Rx load

eth_encap_vlan

(Optional) Encapsulation Vlan

medium

(Optional) medium type

eth_mode

(Optional) Port mode

eth_duplex

(Optional) Duplex

eth_speed

(Optional) Speed

eth_media

(Optional) Media type

eth_beacon

(Optional) Beacon

eth_autoneg

(Optional) Autonegotiation

eth_in_flowctrl

(Optional) Input flowcontrol

eth_out_flowctrl

(Optional) Output flowcontrol

eth_mdix

(Optional) Mdix

eth_ratemode

(Optional) Rate mode

eth_swt_monitor

(Optional) Switchport Monitor

eth_ethertype

(Optional) EtherType

eth_eee_state

(Optional) EEE state

eth_admin_fec_state

(Optional) Admin FEC state

eth_oper_fec_state

(Optional) Oper FEC state

eth_members

(Optional) Members in this channel

eth_link_flapped

(Optional) Last link flapped

eth_clear_counters

(Optional) Last clearing of show interface counters

eth_reset_cntr

(Optional) Interface resets

eth_load_interval1_rx

(Optional) interval 1 timer value in sec

eth_inrate1_bits

(Optional) interval 1 input rate bits/sec

eth_inrate1_pkts

(Optional) interval 1 input rate pkts/sec

eth_load_interval1_tx

(Optional) interval 1 timer value in sec

eth_outrate1_bits

(Optional) interval 1 output rate bits/sec

eth_outrate1_pkts

(Optional) interval 1 output rate pkts/sec

eth_inrate1_summary_bits

(Optional) interval 1 input rate bit summary

eth_inrate1_summary_pkts

(Optional) interval 1 input rate pkt summary

eth_outrate1_summary_bits

(Optional) interval 1 output rate bit summary

eth_outrate1_summary_pkts

(Optional) interval 1 output rate pkt summary

eth_load_interval2_rx

(Optional) interval 2 timer value in sec

eth_inrate2_bits

(Optional) interval 2 input rate bits/sec

eth_inrate2_pkts

(Optional) interval 2 input rate pkts/sec

eth_load_interval2_tx

(Optional) interval 2 timer value in sec

eth_outrate2_bits

(Optional) interval 2 output rate bits/sec

eth_outrate2_pkts

(Optional) interval 2 output rate pkts/sec

eth_inrate2_summary_bits

(Optional) interval 2 input rate bit summary

eth_inrate2_summary_pkts

(Optional) interval 2 input rate pkt summary

eth_outrate2_summary_bits

(Optional) interval 2 output rate bit summary

eth_outrate2_summary_pkts

(Optional) interval 2 output rate pkt summary

eth_load_interval3_rx

(Optional) interval 3 timer value in sec

eth_inrate3_bits

(Optional) interval 3 input rate bits/sec

eth_inrate3_pkts

(Optional) interval 3 input rate pkts/sec

eth_load_interval3_tx

(Optional) interval 3 timer value in sec

eth_outrate3_bits

(Optional) interval 3 output rate bits/sec

eth_outrate3_pkts

(Optional) interval 3 output rate pkts/sec

eth_inrate3_summary_bits

(Optional) interval 3 input rate bit summary

eth_inrate3_summary_pkts

(Optional) interval 3 input rate pkt summary

eth_outrate3_summary_bits

(Optional) interval 3 output rate bit summary

eth_outrate3_summary_pkts

(Optional) interval 3 output rate pkt summary

eth_l2_ucastpkts

(Optional) L2 switched ucast pkts

eth_l2_ucastbytes

(Optional) L2 switched ucast bytes

eth_l2_mcastpkts

(Optional) L2 switched mcast pkts

eth_l2_mcastbytes

(Optional) L2 switched mcast bytes

eth_l2_bcastpkts

(Optional) L2 switched bcast pkts

eth_l2_bcastbytes

(Optional) L2 switched bcast bytes

eth_l3in_ucastpkts

(Optional) L3 in switched ucast pkts

eth_l3in_ucastbytes

(Optional) L3 in switched ucast bytes

eth_l3in_mcastpkts

(Optional) L3 in switched mcast pkts

eth_l3in_mcastbytes

(Optional) L3 in switched mcast bytes

eth_l3in_bcastpkts

(Optional) L3 in switched bcast pkts

eth_l3in_bcastbytes

(Optional) L3 in switched bcast bytes

eth_l3out_ucastpkts

(Optional) L3 out switched ucast pkts

eth_l3out_ucastbytes

(Optional) L3 out switched ucast bytes

eth_l3out_mcastpkts

(Optional) L3 out switched mcast pkts

eth_l3out_mcastbytes

(Optional) L3 out switched mcast bytes

eth_l3out_bcastpkts

(Optional) L3 out switched bcast pkts

eth_l3out_bcastbytes

(Optional) L3 out switched bcast bytes

eth_l3in_routed_pkts

(Optional) L3 in routed pkts

eth_l3in_routed_bytes

(Optional) L3 in routed bytes

eth_l3out_routed_pkts

(Optional) L3 out routed pkts

eth_l3out_routed_bytes

(Optional) L3 out routed bytes

eth_l3avg1_inbytes

(Optional) Load interval 1 L3 average in switched bytes

eth_l3avg1_inpkts

(Optional) Load interval 1 L3 average in switched pkts

eth_l3avg1_outbytes

(Optional) Load interval 1 L3 average out switched bytes

eth_l3avg1_outpkts

(Optional) Load interval 1 L3 average out switched pkts

eth_inucast

(Optional) Unicasts

eth_inmcast

(Optional) Multicasts

eth_inbcast

(Optional) Broadcasts

eth_inpkts

(Optional) Packets input

eth_inbytes

(Optional) Bytes input

eth_jumbo_inpkts

(Optional) Incoming jumbo pkts

eth_storm_supp

(Optional) storm suppression

eth_runts

(Optional) runts

eth_giants

(Optional) giants

eth_crc

(Optional) CRC

eth_nobuf

(Optional) No buffer received

eth_inerr

(Optional) input errors

eth_frame

(Optional) frame

eth_overrun

(Optional) overrun

eth_underrun

(Optional) underruns

eth_ignored

(Optional) ignored

eth_watchdog

(Optional) watchdog

eth_bad_eth

(Optional) bad ether type drop

eth_bad_proto

(Optional) bad protocol drops

eth_in_ifdown_drops

(Optional) Input if-down drops

eth_dribble

(Optional) input packets with dribble condition

eth_indiscard

(Optional) discards

eth_inpause

(Optional) pause input

eth_outucast

(Optional) Unicasts

eth_outmcast

(Optional) Multicasts

eth_outbcast

(Optional) Broadcasts

eth_outpkts

(Optional) packets output

eth_outbytes

(Optional) bytes output

eth_jumbo_outpkts

(Optional) Outgoing jumbo pkts

eth_outerr

(Optional) output errors

eth_coll

(Optional) collisions

eth_deferred

(Optional) deferred

eth_latecoll

(Optional) late collision

eth_lostcarrier

(Optional) lost carrier

eth_nocarrier

(Optional) no carrier

eth_babbles

(Optional) babbles

eth_outdiscard

(Optional) output discard

eth_outpause

(Optional) PAUSE output

mgmt_hw_desc

(Optional) HW description

mgmt_hw_addr

(Optional) HW address

mgmt_ip_addr

(Optional) IP address

mgmt_ip_mask

(Optional) IP address mask

mgmt_mtu

(Optional) MTU

mgmt_speed

(Optional) Speed

mgmt_duplex

(Optional) Duplex

vdc_lvl_in_avg_bits

(Optional) VDC level average input bits

vdc_lvl_in_avg_pkts

(Optional) VDC level average input packets

vdc_lvl_out_avg_bits

(Optional) VDC level average output bits

vdc_lvl_out_avg_pkts

(Optional) VDC level average output packets

vdc_lvl_in_pkts

(Optional) VDC level input packets

vdc_lvl_in_ucast

(Optional) VDC level input unicast packets

vdc_lvl_in_mcast

(Optional) VDC level input multicast packets

vdc_lvl_in_bcast

(Optional) VDC level input broadcast packets

vdc_lvl_in_bytes

(Optional) VDC level input bytes

vdc_lvl_in_bps

(Optional) VDC level input bytes per second

vdc_lvl_in_pps

(Optional) VDC level input packets per second

vdc_lvl_out_pkts

(Optional) VDC level output packets

vdc_lvl_out_ucast

(Optional) VDC level output unicast packets

vdc_lvl_out_mcast

(Optional) VDC level output multicast packets

vdc_lvl_out_bcast

(Optional) VDC level output broadcast packets

vdc_lvl_out_bytes

(Optional) VDC level output bytes

vdc_lvl_out_bps

(Optional) VDC level output bytes per second

vdc_lvl_out_pps

(Optional) VDC level output packets per second

mgmt_in_pkts

(Optional) Input packets

mgmt_in_bytes

(Optional) Input bytes

mgmt_in_mcast

(Optional) Input multicast frames

mgmt_in_compressed

(Optional) Input compressed

mgmt_in_errors

(Optional) Input errors

mgmt_in_frame

(Optional) Input frame errors

mgmt_in_overrun

(Optional) Input overrun

mgmt_in_fifo

(Optional) Input fifo

mgmt_out_pkts

(Optional) Output packets

mgmt_out_bytes

(Optional) Output bytes

mgmt_out_underruns

(Optional) Output overruns

mgmt_out_errors

(Optional) Output errors

mgmt_out_collisions

(Optional) Output collisions

mgmt_out_fifo

(Optional) Output fifo

mgmt_out_carrier

(Optional) Output carrier errors

mgmt_align_err

(Optional) Align error

mgmt_fcs_err

(Optional) FCS error

mgmt_xmit_err

(Optional) Transmit error

mgmt_rcv_err

(Optional) Receive error

mgmt_undersize

(Optional) Undersize

mgmt_outdisc

(Optional) Out discard

mgmt_single_col

(Optional) Single collision

mgmt_multi_col

(Optional) Multiple collision

mgmt_late_col

(Optional) Late collision

mgmt_excess_col

(Optional) Excess collision

mgmt_carri_sen

(Optional) Carrier sense

mgmt_runts

(Optional) Runts

mgmt_giants

(Optional) Giants

mgmt_sqetest_err

(Optional) SQETest error

mgmt_deferred_tx

(Optional) Deferred tx

mgmt_inmactx_err

(Optional) In MAC tx

mgmt_inmacrx_err

(Optional) In MAC rx

mgmt_symbol_err

(Optional) Symbol error

loop_in_pkts

(Optional) Input packets

loop_in_bytes

(Optional) Input bytes

loop_in_mcast

(Optional) Input multicast

loop_in_compressed

(Optional) Input compressed

loop_in_errors

(Optional) Input errors

loop_in_frame

(Optional) Input frame errors

loop_in_overrun

(Optional) Input overrun

loop_in_fifo

(Optional) Input fifo

loop_out_pkts

(Optional) Output packets

loop_out_bytes

(Optional) Output bytes

loop_out_underruns

(Optional) Output underruns

loop_out_errors

(Optional) Output errors

loop_out_collisions

(Optional) Output collisions

loop_out_fifo

(Optional) Output fifo

loop_out_carriers

(Optional) Output carrier errors

admin-state

(Optional)

tunnel-ipv4

(Optional) interface IPv4 address

mtu

(Optional) interface Maximum Transmission Unit

bandwidth

(Optional) interface Bandwidth in kilobits

encap-type

(Optional)

keepalive-period

(Optional) keealive period

keepalive-retries

(Optional) number of retries

src-ipv4

(Optional) tunnel source IPv4 address

src-intf

(Optional) tunnel source interface

dest-ipv4

(Optional) tunnel destination IPv4 address

dest-hostname

(Optional) tunnel destination hostname

vrf_name

(Optional) transport VRF name

wccp_header

(Optional) wccp header

ttl_val

(Optional) tunnel time to live value

tunnel_pmtud_age_time

(Optional) tunnel path MTU discovery age time

tunnel_pmtud_min_mtu

(Optional) tunnel path MTU discovery min mtu

tunnel_pmtud

(Optional) tunnel path MTU discovered

tunnel_pgm_mtu

(Optional) tunnel actual programmed MTU

tunnel_rx_pkt_count

(Optional) total number of packets received

tunnel_rx_byte_count

(Optional) total number of bytes received

tunnel_rx_rate

(Optional) packets input rate per 5 minutes

tunnel_tx_pkt_count

(Optional) total number of packets transmitted

tunnel_tx_byte_count

(Optional) total number of bytes transmitted

tunnel_tx_rate

(Optional) packets transmitted per 5 minutes

tunnel_clear_counter

(Optional) Last clearing of show interface counters

svi_if_index

(Optional) Interface

svi_admin_state

(Optional)

oper_state

(Optional)

svi_rsn_desc

(Optional) Interface state reason detailed

svi_line_proto

(Optional)

svi_hw

(Optional) Hardware

svi_mac

(Optional) Address

svi_desc

(Optional) Interface Description

svi_ip_addr

(Optional) IP Address

svi_ip_mask

(Optional) IP address mask

svi_mtu

(Optional) MTU size in bytes

svi_bw

(Optional) Bandwidth in kilobits

svi_delay

(Optional) Throughput delay (tens of microseconds)

vlan_id

(Optional) Vlan

type

(Optional) type

svi_tx_load

(Optional) Tx Load

svi_rx_load

(Optional) Rx Load

svi_carrier_delay_sec

(Optional) carrier delay value in seconds

svi_carrier_delay_msec

(Optional) carrier delay value in milli-seconds

svi_arp_type

(Optional) ARP type

svi_arp_timeout

(Optional) ARP timeout value

svi_time_last_cleared

(Optional) Time last cleared

TABLE_sec_vlan

(Optional) secondary vlans

sec_vlan

(Optional) vlan id

sec_vlan_type

(Optional) secondary vlan type

svi_reliability

(Optional) Reliability

overlay_addr

(Optional) Overlay address

overlay_addr_mask

(Optional) Overlay address mask

overlay_mtu

(Optional) MTU

overlay_bandwidth

(Optional) Bandwidth

overlay_encap_str

(Optional) Encap type

overlay_vrf

(Optional) VRF

overlay_src_addr

(Optional) Source address

overlay_dst_addr

(Optional) Destination address

overlay_last_link_flap

(Optional) Last link flap

overlay_clear_counters

(Optional) Last clearing of show interface counters

overlay_load_interval

(Optional) Load interval

overlay_rx_ucastpkts

(Optional) Received ucast pkts

overlay_rx_ucastbytes

(Optional) Received ucast bytes

overlay_rx_mcastpkts

(Optional) Received mcast pkts

overlay_rx_mcastbytes

(Optional) Received mcast bytes

overlay_rx_bcastpkts

(Optional) Received bcast pkts

overlay_rx_bcastbytes

(Optional) Received bcast bytes

overlay_rx_pkts

(Optional) Total received pkts

overlay_rx_bytes

(Optional) Total received bytes

overlay_rx_bitrate

(Optional) Receive bit rate

overlay_rx_pktrate

(Optional) Receive pkt rate

overlay_tx_ucastpkts

(Optional) Trasnmitted ucast pkts

overlay_tx_ucastbytes

(Optional) Trasnmitted ucast bytes

overlay_tx_mcastpkts

(Optional) Trasnmitted mcast pkts

overlay_tx_mcastbytes

(Optional) Trasnmitted mcast bytes

overlay_tx_bcastpkts

(Optional) Trasnmitted bcast pkts

overlay_tx_bcastbytes

(Optional) Trasnmitted bcast bytes

overlay_tx_pkts

(Optional) Total transmitted pkts

overlay_tx_bytes

(Optional) Total transmitted bytes

overlay_tx_bitrate

(Optional) Transmit bit rate

overlay_tx_pktrate

(Optional) Transmit pkt rate

switchport

(Optional) Switchport enabled

Command Mode

  • /exec

show interface

show interface <ifloop> [ __readonly__ TABLE_interface <interface> [ <state> ] [ <admin_state> ] [ <share_state> ] [ <state_rsn> ] [ <state_rsn_desc> ] [ <desc> ] [ <eth_bundle> ] [ <mgmt_sfp> ] [ <mgmt_type> ] [ <eth_eee_state> ] [ <eth_dce_mode> ] [ <vpc_status> ] [ <eth_rsn_fac> ] [ <eth_rsn_code> ] [ <eth_hw_desc> ] [ <eth_hw_addr> ] [ <eth_bia_addr> ] [ <eth_ip_addr> ] [ <eth_ip_mask> ] [ <eth_ip_prefix> ] [ <eth_mtu> ] [ <eth_bw> ] [ <eth_encap_vlan> ] [ <eth_dly> ] [ <eth_reliability> ] [ <eth_txload> ] [ <eth_rxload> ] [ <eth_loopback> ] [ <eth_keepalive> ] [ <eth_duplex> ] [ <eth_speed> ] [ <eth_mode> ] [ <eth_ratemode> ] [ <eth_autoneg> ] [ <eth_beacon> ] [ <eth_media> ] [ <eth_in_flowctrl> ] [ <eth_out_flowctrl> ] [ <eth_mdix> ] [ <eth_swt_monitor> ] [ <eth_ethertype> ] [ <eth_members> ] [ <eth_clk_mode> ] [ <eth_arp_type> ] [ <eth_arp_timeout> ] [ <eth_last_in> ] [ <eth_last_out> ] [ <eth_out_hang> ] [ <eth_clear_counters> ] [ <eth_link_flapped> ] [ <eth_inq_size> ] [ <eth_inq_max> ] [ <eth_inq_drops> ] [ <eth_inq_flush> ] [ <eth_out_drop> ] [ <eth_q_strategy> ] [ <eth_outq_size> ] [ <eth_outq_max> ] [ <eth_reset_cntr> ] [ <loop_in_pkts> ] [ <loop_in_bytes> ] [ <loop_in_mcast> ] [ <loop_in_compressed> ] [ <loop_in_errors> ] [ <loop_in_frame> ] [ <loop_in_overrun> ] [ <loop_in_fifo> ] [ <loop_out_pkts> ] [ <loop_out_bytes> ] [ <loop_out_underruns> ] [ <loop_out_errors> ] [ <loop_out_collisions> ] [ <loop_out_fifo> ] [ <loop_out_carriers> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifloop

Enter interface type and number in module/slot format

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

state

(Optional) Interface state

admin_state

(Optional) Interface admin state

share_state

(Optional) Interface ownership

state_rsn

(Optional) Interface state reason

state_rsn_desc

(Optional) Interface state reason detailed

desc

(Optional) Interface description

mgmt_sfp

(Optional) mgmt sfp

mgmt_type

(Optional) mgmt type

eth_bundle

(Optional) Belongs to bundle

eth_eee_state

(Optional) EEE state

eth_dce_mode

(Optional) DCE mode description

vpc_status

(Optional) VPC status

eth_rsn_fac

(Optional) State reason facility

eth_rsn_code

(Optional) State reason code

eth_hw_desc

(Optional) HW description

eth_hw_addr

(Optional) HW address

eth_bia_addr

(Optional) bia address

eth_ip_addr

(Optional) IP Address

eth_ip_mask

(Optional) IP address mask

eth_ip_prefix

(Optional) IP Prefix

eth_mtu

(Optional) MTU

eth_bw

(Optional) Bandwidth

eth_encap_vlan

(Optional) Encapsulation Vlan

eth_dly

(Optional) Delay

eth_reliability

(Optional) Reliability

eth_txload

(Optional) Tx load

eth_rxload

(Optional) Rx load

eth_loopback

(Optional) Loopback

eth_keepalive

(Optional) Keepalive

eth_duplex

(Optional) Duplex

eth_speed

(Optional) Speed

eth_mode

(Optional) Port mode

eth_ratemode

(Optional) Rate mode

eth_autoneg

(Optional) Autonegotiation

eth_beacon

(Optional) Beacon

eth_media

(Optional) Media type

eth_in_flowctrl

(Optional) Input flowcontrol

eth_out_flowctrl

(Optional) Output flowcontrol

eth_mdix

(Optional) Mdix

eth_swt_monitor

(Optional) Switchport Monitor

eth_ethertype

(Optional) EtherType

eth_members

(Optional) Members in this channel

eth_clk_mode

(Optional) Clock mode

eth_arp_type

(Optional) ARP type

eth_arp_timeout

(Optional) ARP timeout

eth_last_in

(Optional) Last input

eth_last_out

(Optional) Last output

eth_out_hang

(Optional) Last output hang

eth_clear_counters

(Optional) Last clearing of show interface counters

eth_link_flapped

(Optional) Last link flapped

eth_inq_size

(Optional) Input queue size

eth_inq_max

(Optional) Input queue max

eth_inq_drops

(Optional) Input queue drops

eth_inq_flush

(Optional) Input queue flushes

eth_out_drop

(Optional) Output drops

eth_q_strategy

(Optional) Queueing strategy

eth_outq_size

(Optional) Output queue size

eth_outq_max

(Optional) Output queue max

eth_reset_cntr

(Optional) Interface resets

loop_in_pkts

(Optional) Input packets

loop_in_bytes

(Optional) Input bytes

loop_in_mcast

(Optional) Input multicast

loop_in_compressed

(Optional) Input compressed

loop_in_errors

(Optional) Input errors

loop_in_frame

(Optional) Input frame errors

loop_in_overrun

(Optional) Input overrun

loop_in_fifo

(Optional) Input fifo

loop_out_pkts

(Optional) Output packets

loop_out_bytes

(Optional) Output bytes

loop_out_underruns

(Optional) Output underruns

loop_out_errors

(Optional) Output errors

loop_out_collisions

(Optional) Output collisions

loop_out_fifo

(Optional) Output fifo

loop_out_carriers

(Optional) Output carrier errors

Command Mode

  • /exec

show interface

show interface <iftun_desc> [ __readonly__ TABLE_interface <interface> <state> [ <state_rsn_desc> ] [ <desc> ] <admin-state> { <tunnel-ipv4> | <tunnel-ipv6> } <mtu> <bandwidth> <encap-type> <keepalive-period> <keepalive-retries> { <src-ipv4> | <src-ipv6> } <src-intf> { <dest-ipv4> | <dest-ipv6> } <dest-hostname> <vrf_name> <wccp_header> <ttl_val> <tunnel_pmtud_age_time> <tunnel_pmtud_min_mtu> <tunnel_pmtud> <tunnel_pgm_mtu> <tunnel_rx_pkt_count> <tunnel_rx_byte_count> <tunnel_rx_rate> <tunnel_tx_pkt_count> <tunnel_tx_byte_count> <tunnel_tx_rate> <tunnel_clear_counter> ]

Syntax Description

show

Show running system information

interface

Show interface status and information

iftun_desc

Enter tunnel interface number

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

state

(Optional) Interface state

state_rsn_desc

(Optional) Interface state reason detailed

desc

(Optional) Interface description

admin-state

(Optional)

tunnel-ipv4

(Optional) interface IPv4 address

mtu

(Optional) interface Maximum Transmission Unit

bandwidth

(Optional) interface Bandwidth in kilobits

encap-type

(Optional)

keepalive-period

(Optional) keealive period

keepalive-retries

(Optional) number of retries

src-ipv4

(Optional) tunnel source IPv4 address

src-intf

(Optional) tunnel source interface

dest-ipv4

(Optional) tunnel destination IPv4 address

dest-hostname

(Optional) tunnel destination hostname

vrf_name

(Optional) transport VRF name

wccp_header

(Optional) wccp header

ttl_val

(Optional) tunnel time to live value

tunnel_pmtud_age_time

(Optional) tunnel path MTU discovery age time

tunnel_pmtud_min_mtu

(Optional) tunnel path MTU discovery min mtu

tunnel_pmtud

(Optional) tunnel path MTU discovered

tunnel_pgm_mtu

(Optional) tunnel actual programmed MTU

tunnel_rx_pkt_count

(Optional) total number of packets received

tunnel_rx_byte_count

(Optional) total number of bytes received

tunnel_rx_rate

(Optional) packets input rate per 5 minutes

tunnel_tx_pkt_count

(Optional) total number of packets transmitted

tunnel_tx_byte_count

(Optional) total number of bytes transmitted

tunnel_tx_rate

(Optional) packets transmitted per 5 minutes

tunnel_clear_counter

(Optional) Last clearing of show interface counters

Command Mode

  • /exec

show interface

show interface <ifrange> [ __readonly__ TABLE_interface <interface> <state> <state_rsn> <state_rsn_desc> <desc> [ <overlay_addr> ] [ <overlay_addr_mask> ] [ <overlay_mtu> ] [ <overlay_bandwidth> ] [ <overlay_encap_str> ] [ <overlay_vrf> ] [ <overlay_src_addr> ] [ <overlay_dst_addr> ] [ <overlay_last_link_flap> ] [ <overlay_clear_counters> ] [ <overlay_load_interval> ] [ <overlay_rx_ucastpkts> ] [ <overlay_rx_ucastbytes> ] [ <overlay_rx_mcastpkts> ] [ <overlay_rx_mcastbytes> ] [ <overlay_rx_pkts> ] [ <overlay_rx_bytes> ] [ <overlay_rx_bcastpkts> ] [ <overlay_rx_bcastbytes> ] [ <overlay_rx_bitrate> ] [ <overlay_rx_pktrate> ] [ <overlay_tx_ucastpkts> ] [ <overlay_tx_ucastbytes> ] [ <overlay_tx_mcastpkts> ] [ <overlay_tx_mcastbytes> ] [ <overlay_tx_bcastpkts> ] [ <overlay_tx_bcastbytes> ] [ <overlay_tx_pkts> ] [ <overlay_tx_bytes> ] [ <overlay_tx_bitrate> ] [ <overlay_tx_pktrate> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifrange

Enter interface type and number

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

state

(Optional) Interface state

state_rsn

(Optional) Interface state reason

state_rsn_desc

(Optional) Interface state reason detailed

desc

(Optional) Interface description

overlay_addr

(Optional) Overlay address

overlay_addr_mask

(Optional) Overlay address mask

overlay_mtu

(Optional) MTU

overlay_bandwidth

(Optional) Bandwidth

overlay_encap_str

(Optional) Encap type

overlay_vrf

(Optional) VRF

overlay_src_addr

(Optional) Source address

overlay_dst_addr

(Optional) Destination address

overlay_last_link_flap

(Optional) Last link flap

overlay_clear_counters

(Optional) Last clearing of show interface counters

overlay_load_interval

(Optional) Load interval

overlay_rx_ucastpkts

(Optional) Received ucast pkts

overlay_rx_ucastbytes

(Optional) Received ucast bytes

overlay_rx_mcastpkts

(Optional) Received mcast pkts

overlay_rx_mcastbytes

(Optional) Received mcast bytes

overlay_rx_bcastpkts

(Optional) Received bcast pkts

overlay_rx_bcastbytes

(Optional) Received bcast bytes

overlay_rx_pkts

(Optional) Total received pkts

overlay_rx_bytes

(Optional) Total received bytes

overlay_rx_bitrate

(Optional) Receive bit rate

overlay_rx_pktrate

(Optional) Receive pkt rate

overlay_tx_ucastpkts

(Optional) Trasnmitted ucast pkts

overlay_tx_ucastbytes

(Optional) Trasnmitted ucast bytes

overlay_tx_mcastpkts

(Optional) Trasnmitted mcast pkts

overlay_tx_mcastbytes

(Optional) Trasnmitted mcast bytes

overlay_tx_bcastpkts

(Optional) Trasnmitted bcast pkts

overlay_tx_bcastbytes

(Optional) Trasnmitted bcast bytes

overlay_tx_pkts

(Optional) Total transmitted pkts

overlay_tx_bytes

(Optional) Total transmitted bytes

overlay_tx_bitrate

(Optional) Transmit bit rate

overlay_tx_pktrate

(Optional) Transmit pkt rate

Command Mode

  • /exec

show interface

show interface <ifrange> [ __readonly__ TABLE_interface <interface> <state> [ <state_rsn_desc> ] [ <state_rsn> ] [ <admin_state> ] [ <eth_rsn_fac> ] [ <eth_rsn_code> ] [ <share_state> ] [ <vpc_status> ] [ <eth_bundle> ] [ <eth_hw_desc> ] [ <eth_hw_addr> ] [ <eth_bia_addr> ] [ <desc> ] [ <eth_ip_addr> ] [ <eth_ip_mask> ] [ <eth_mtu> ] [ <eth_bw> ] [ <eth_dly> ] [ <eth_reliability> ] [ <eth_txload> ] [ <eth_rxload> ] [ <eth_encap_vlan> ] [ <eth_mode> ] [ <eth_duplex> ] [ <eth_speed> ] [ <eth_media> ] [ <eth_beacon> ] [ <eth_autoneg> ] [ <eth_in_flowctrl> ] [ <eth_out_flowctrl> ] [ <eth_mdix> ] [ <eth_ratemode> ] [ <eth_swt_monitor> ] [ <eth_ethertype> ] [ <eth_members> ] [ <eth_link_flapped> ] [ <eth_clear_counters> ] [ <eth_reset_cntr> ] [ <nve_addr> ] [ <nve_addr_mask> ] [ <nve_vcid> ] [ <nve_mtu> ] [ <nve_bandwidth> ] [ <nve_encap_str> ] [ <nve_vrf> ] [ <nve_src_addr> ] [ <nve_dst_addr> ] [ <nve_last_link_flap> ] [ <nve_clear_counters> ] [ <nve_load_interval> ] [ <nve_rx_ucastpkts> ] [ <nve_rx_ucastbytes> ] [ <nve_rx_mcastpkts> ] [ <nve_rx_mcastbytes> ] [ <nve_rx_pkts> ] [ <nve_rx_bytes> ] [ <nve_rx_bcastpkts> ] [ <nve_rx_bcastbytes> ] [ <nve_rx_bitrate> ] [ <nve_rx_pktrate> ] [ <nve_tx_ucastpkts> ] [ <nve_tx_ucastbytes> ] [ <nve_tx_mcastpkts> ] [ <nve_tx_mcastbytes> ] [ <nve_tx_bcastpkts> ] [ <nve_tx_bcastbytes> ] [ <nve_tx_pkts> ] [ <nve_tx_bytes> ] [ <nve_tx_bitrate> ] [ <nve_tx_pktrate> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifrange

Enter interface type and number

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

state

(Optional) Interface state

state_rsn_desc

(Optional) Interface state reason detailed

state_rsn

(Optional) Interface state reason

admin_state

(Optional) admin state

eth_rsn_fac

(Optional) State reason facility

eth_rsn_code

(Optional) State reason code

share_state

(Optional) Interface ownership

vpc_status

(Optional) VPC status

eth_bundle

(Optional) Belongs to bundle

eth_hw_desc

(Optional) HW description

eth_hw_addr

(Optional) HW address

eth_bia_addr

(Optional) bia address

desc

(Optional) Interface description

eth_ip_addr

(Optional) IP Address

eth_ip_mask

(Optional) IP address mask

eth_mtu

(Optional) MTU

eth_bw

(Optional) Bandwidth

eth_dly

(Optional) Delay

eth_reliability

(Optional) Reliability

eth_txload

(Optional) Tx load

eth_rxload

(Optional) Rx load

eth_encap_vlan

(Optional) Encapsulation Vlan

eth_mode

(Optional) Port mode

eth_duplex

(Optional) Duplex

eth_speed

(Optional) Speed

eth_media

(Optional) Media type

eth_beacon

(Optional) Beacon

eth_autoneg

(Optional) Autonegotiation

eth_in_flowctrl

(Optional) Input flowcontrol

eth_out_flowctrl

(Optional) Output flowcontrol

eth_mdix

(Optional) Mdix

eth_ratemode

(Optional) Rate mode

eth_swt_monitor

(Optional) Switchport Monitor

eth_ethertype

(Optional) EtherType

eth_members

(Optional) Members in this channel

eth_link_flapped

(Optional) Last link flapped

eth_clear_counters

(Optional) Last clearing of show interface counters

eth_reset_cntr

(Optional) Interface resets

nve_addr

(Optional) Peer address

nve_addr_mask

(Optional) Peer address mask

nve_vcid

(Optional) VCID

nve_mtu

(Optional) MTU

nve_bandwidth

(Optional) Bandwidth

nve_encap_str

(Optional) Encap type

nve_vrf

(Optional) VRF

nve_src_addr

(Optional) Source address

nve_dst_addr

(Optional) Destination address

nve_last_link_flap

(Optional) Last link flap

nve_clear_counters

(Optional) Last clearing of show interface counters

nve_load_interval

(Optional) Load interval

nve_rx_ucastpkts

(Optional) Received ucast pkts

nve_rx_ucastbytes

(Optional) Received ucast bytes

nve_rx_mcastpkts

(Optional) Received mcast pkts

nve_rx_mcastbytes

(Optional) Received mcast bytes

nve_rx_bcastpkts

(Optional) Received bcast pkts

nve_rx_bcastbytes

(Optional) Received bcast bytes

nve_rx_pkts

(Optional) Total received pkts

nve_rx_bytes

(Optional) Total received bytes

nve_rx_bitrate

(Optional) Receive bit rate

nve_rx_pktrate

(Optional) Receive pkt rate

nve_tx_ucastpkts

(Optional) Trasnmitted ucast pkts

nve_tx_ucastbytes

(Optional) Trasnmitted ucast bytes

nve_tx_mcastpkts

(Optional) Trasnmitted mcast pkts

nve_tx_mcastbytes

(Optional) Trasnmitted mcast bytes

nve_tx_bcastpkts

(Optional) Trasnmitted bcast pkts

nve_tx_bcastbytes

(Optional) Trasnmitted bcast bytes

nve_tx_pkts

(Optional) Total transmitted pkts

nve_tx_bytes

(Optional) Total transmitted bytes

nve_tx_bitrate

(Optional) Transmit bit rate

nve_tx_pktrate

(Optional) Transmit pkt rate

Command Mode

  • /exec

show interface brief

show interface <ifrange> brief [ __readonly__ TABLE_interface <interface> <state> [ <state_rsn> ] [ <state_rsn_desc> ] [ <overlay_mtu> ] [ <overlay_bandwidth> ] [ <overlay_vrf> ] [ <overlay_src_addr> ] [ <overlay_dst_addr> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifrange

Enter interface type and number

brief

Show brief info of interface

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

state

(Optional) Interface state

state_rsn

(Optional) Interface state reason

state_rsn_desc

(Optional) Interface state reason detailed

overlay_mtu

(Optional) MTU

overlay_bandwidth

(Optional) Bandwidth

overlay_vrf

(Optional) VRF

overlay_src_addr

(Optional) Source address

overlay_dst_addr

(Optional) Destination address

Command Mode

  • /exec

show interface brief

show interface <ifpch_brf> brief [ __readonly__ TABLE_interface <interface> [ <vlan> ] <type> <portmode> <state> <state_rsn_desc> <speed> <ratemode> [ <proto> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifpch_brf

Enter interface type and number in module/slot format

brief

Show brief info of interface

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

vlan

(Optional) Vlan

type

(Optional) Type

portmode

(Optional) Port mode

state

(Optional) Interface state

state_rsn_desc

(Optional) Interface state reason detailed

speed

(Optional) Speed

ratemode

(Optional) Interface port speed

proto

(Optional) Port Channel Protocol

Command Mode

  • /exec

show interface brief

show interface brief [ controller | cli ] [ __readonly__ TABLE_interface [ <interface> ] [ <vlan> ] [ <type> ] [ <portmode> ] [ <state> ] [ <state_rsn> ] [ <state_rsn_desc> ] [ <desc> ] [ <vrf> ] [ <ipv6_addr> ] [ <ip_addr> ] [ <speed> ] [ <mtu> ] [ <ratemode> ] [ <portchan> ] [ <proto> ] [ <interface_vfc> ] [ <vsan_brief> ] [ <admin_mode> ] [ <admin_trunk_mode> ] [ <status> ] [ <fcot_info> ] [ <bind_info> ] [ <bind_type> ] [ <port_rate_mode> ] [ <oper_speed> ] [ <port_channel> ] [ <ip_addr1> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

brief

Show brief info of interface

controller

(Optional) Show controller configured interfaces

cli

(Optional) Show CLI configured interfaces

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

state

(Optional) Interface state

state_rsn

(Optional) Interface state reason

state_rsn_desc

(Optional) Interface state reason detailed

desc

(Optional) Interface description

vrf

(Optional) Vrf membership

ip_addr

(Optional) IP address

mtu

(Optional) MTU

speed

(Optional) Speed

vlan

(Optional) Vlan

type

(Optional) Type

portmode

(Optional) Port mode

ratemode

(Optional) Interface port speed

portchan

(Optional) Port Channel Membership

proto

(Optional) Port Channel Protocol

interface_vfc

(Optional) Interface index

vsan_brief

(Optional) vsan brief

admin_mode

(Optional) admin mode

admin_trunk_mode

(Optional) admin trunk mode

status

(Optional) status

fcot_info

(Optional) fcot info

bind_info

(Optional) bind interface

bind_type

(Optional) bind type

port_rate_mode

(Optional) rate mode

oper_speed

(Optional) speed

port_channel

(Optional) port channel number

ip_addr1

(Optional) IP address

Command Mode

  • /exec

show interface brief

show interface <ifloop_brf> brief [ __readonly__ TABLE_interface <interface> <state> [ <desc> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifloop_brf

Enter interface type and number in module/slot format

brief

Show brief info of interface

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

state

(Optional) Interface state

desc

(Optional) Interface description

Command Mode

  • /exec

show interface brief

show interface <iftunnel_brf> brief [ __readonly__ TABLE_interface <interface> <state> <admin-state> { <tunnel-ipv4> | <tunnel-ipv6> } <mtu> <bandwidth> <encap-type> <keepalive-period> <keepalive-retries> { <src-ipv4> | <src-ipv6> } <src-intf> { <dest-ipv4> | <dest-ipv6> } <dest-hostname> <vrf_name> <wccp_header> <ttl_val> <tunnel_pmtud_age_time> <tunnel_pmtud_min_mtu> <tunnel_pmtud> <tunnel_pgm_mtu> <tunnel_rx_pkt_count> <tunnel_rx_byte_count> <tunnel_rx_rate> <tunnel_tx_pkt_count> <tunnel_tx_byte_count> <tunnel_tx_rate> <tunnel_clear_counter> ]

Syntax Description

show

Show running system information

interface

Show interface status and information

iftunnel_brf

Enter interface type and number in module/slot format

brief

Show brief info of interface

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

state

(Optional) Interface state

admin-state

(Optional)

tunnel-ipv4

(Optional) interface IPv4 address

mtu

(Optional) interface Maximum Transmission Unit

bandwidth

(Optional) interface Bandwidth in kilobits

encap-type

(Optional)

keepalive-period

(Optional) keealive period

keepalive-retries

(Optional) number of retries

src-ipv4

(Optional) tunnel source IPv4 address

src-intf

(Optional) tunnel source interface

dest-ipv4

(Optional) tunnel destination IPv4 address

dest-hostname

(Optional) tunnel destination hostname

vrf_name

(Optional) transport VRF name

wccp_header

(Optional) wccp header

ttl_val

(Optional) tunnel time to live value

tunnel_pmtud_age_time

(Optional) tunnel path MTU discovery age time

tunnel_pmtud_min_mtu

(Optional) tunnel path MTU discovery min mtu

tunnel_pmtud

(Optional) tunnel path MTU discovered

tunnel_pgm_mtu

(Optional) tunnel actual programmed MTU

tunnel_rx_pkt_count

(Optional) total number of packets received

tunnel_rx_byte_count

(Optional) total number of bytes received

tunnel_rx_rate

(Optional) packets input rate per 5 minutes

tunnel_tx_pkt_count

(Optional) total number of packets transmitted

tunnel_tx_byte_count

(Optional) total number of bytes transmitted

tunnel_tx_rate

(Optional) packets transmitted per 5 minutes

tunnel_clear_counter

(Optional) Last clearing of show interface counters

Command Mode

  • /exec

show interface brief

show interface <ifmgmt_brf> brief [ __readonly__ TABLE_interface <interface> [ <vrf> ] <state> [ <ipv6_addr> ] [ <ip_addr> ] <mtu> <speed> [ <duplex> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifmgmt_brf

Enter interface type and number in module/slot format

brief

Show brief info of interface

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

vrf

(Optional) Vrf membership

state

(Optional) Interface state

ip_addr

(Optional) IP address

mtu

(Optional) MTU

speed

(Optional) Speed

duplex

(Optional) Duplex

Command Mode

  • /exec

show interface brief

show interface <ifeth_brf> brief [ __readonly__ TABLE_interface <interface> [ <vlan> ] <type> <portmode> <state> <state_rsn_desc> <speed> <ratemode> [ <portchan> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifeth_brf

Enter interface type and number in module/slot format

brief

Show brief info of interface

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

vlan

(Optional) Vlan

type

(Optional) Type

portmode

(Optional) Port mode

state

(Optional) Interface state

state_rsn_desc

(Optional) Interface state reason detailed

speed

(Optional) Speed

ratemode

(Optional) Interface port speed

portchan

(Optional) Port Channel Membership

Command Mode

  • /exec

show interface brief

show interface <ifrange> brief [ __readonly__ TABLE_interface <interface> <state> [ <state_rsn> ] [ <state_rsn_desc> ] [ <admin_state> ] [ <nve_addr> ] [ <nve_vcid> ] [ <nve_mtu> ] [ <nve_bandwidth> ] [ <nve_vrf> ] [ <nve_src_addr> ] [ <nve_dst_addr> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifrange

Enter interface type and number

brief

Show brief info of interface

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

state

(Optional) Interface state

state_rsn

(Optional) Interface state reason

state_rsn_desc

(Optional) Interface state reason detailed

admin_state

(Optional) admin state

nve_addr

(Optional) Peer address

nve_vcid

(Optional) VCID

nve_mtu

(Optional) MTU

nve_bandwidth

(Optional) Bandwidth

nve_vrf

(Optional) VRF

nve_src_addr

(Optional) Source address

nve_dst_addr

(Optional) Destination address

Command Mode

  • /exec

show interface cable-diagnostics-tdr

show interface <ifid_tdr> cable-diagnostics-tdr [ __readonly__ TABLE_interface <interface> <speed> <distance1> <pair1_status> <distance2> <pair2_status> <distance3> <pair3_status> <distance4> <pair4_status> ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifid_tdr

Enter interface type and number in module/slot format

cable-diagnostics-tdr

Show interface tdr test information

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

speed

(Optional) Speed

distance1

(Optional) Distance to fault for pair 1

distance2

(Optional) Distance to fault for pair 2

distance3

(Optional) Distance to fault for pair 3

distance4

(Optional) Distance to fault for pair 4

pair1_status

(Optional) Pair1 status

pair2_status

(Optional) Pair2 status

pair3_status

(Optional) Pair3 status

pair4_status

(Optional) Pair4 status

Command Mode

  • /exec

show interface capabilities

show interface <ifid_eth_cap> capabilities [ __readonly__ TABLE_interface <interface> <model> <type> <speed> <duplex> <trunk_encap> <dce_capable> <channel> <bcast_supp> <flo_ctrl> <rate_mode> <port_mode> [ <fast_start> ] <qos_scheduling> <cos_rewrite> <tos_rewrite> [ <inline_power> ] <span> <udld> [ <mdix> ] [ <tdr> ] <lnk_debounce> <lnk_debounce_time> <fex_fabric> <dot1q_tunnel> [ <pvlan_trunk_mode> ] [ <port_group> ] [ <port_group_members> ] <eee_capable> <pfc_capable> <speed_group_capable> <buffer_boost_capable> [ <bkout_capable> ] [ <macsec_capable> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifid_eth_cap

Enter interface type and number in module/slot format

capabilities

Show interface capabilities information

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

model

(Optional) Model

type

(Optional) Type

speed

(Optional) Speed

duplex

(Optional) Duplex

trunk_encap

(Optional) Trunk encap. type

dce_capable

(Optional) DCE mode capable

channel

(Optional) Channel

bcast_supp

(Optional) Broadcast suppression

flo_ctrl

(Optional) Flowcontrol

rate_mode

(Optional) Rate mode

port_mode

(Optional) Port mode

fast_start

(Optional) Fast start

qos_scheduling

(Optional) QOS scheduling

cos_rewrite

(Optional) CoS rewrite

tos_rewrite

(Optional) ToS rewrite

inline_power

(Optional) Inline power

span

(Optional) SPAN

udld

(Optional) UDLD

mdix

(Optional) MDIX

tdr

(Optional) TDR

lnk_debounce

(Optional) Link debounce

lnk_debounce_time

(Optional) Link debounce time

fex_fabric

(Optional) FEX Fabric

dot1q_tunnel

(Optional) dot1q-tunnel

pvlan_trunk_mode

(Optional) Private-vlan trunk mode

port_group

(Optional) Port Group

port_group_members

(Optional) Port Group Members

eee_capable

(Optional) EEE (efficient-eth)

pfc_capable

(Optional) PFC Capable:

bkout_capable

(Optional) Breakout Capable:

buffer_boost_capable

(Optional) Buffer Boost Capable:

speed_group_capable

(Optional) Speed group capable

macsec_capable

(Optional) MACSEC capable

Command Mode

  • /exec

show interface capabilities

show interface capabilities [ __readonly__ TABLE_interface <interface> <model> <type> <speed> <duplex> <trunk_encap> <dce_capable> <channel> <bcast_supp> <flo_ctrl> <rate_mode> <port_mode> [ <fast_start> ] <qos_scheduling> <cos_rewrite> <tos_rewrite> [ <inline_power> ] <span> <udld> [ <mdix> ] [ <tdr> ] <lnk_debounce> <lnk_debounce_time> <fex_fabric> <dot1q_tunnel> [ <pvlan_trunk_mode> ] [ <port_group> ] [ <port_group_members> ] <eee_capable> <pfc_capable> <speed_group_capable> <buffer_boost_capable> [ <bkout_capable> ] [ <macsec_capable> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

capabilities

Show interface capabilities information

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

model

(Optional) Model

type

(Optional) Type

speed

(Optional) Speed

duplex

(Optional) Duplex

trunk_encap

(Optional) Trunk encap. type

dce_capable

(Optional) DCE mode capable

channel

(Optional) Channel

bcast_supp

(Optional) Broadcast suppression

flo_ctrl

(Optional) Flowcontrol

rate_mode

(Optional) Rate mode

port_mode

(Optional) Port mode

fast_start

(Optional) Fast start

qos_scheduling

(Optional) QOS scheduling

cos_rewrite

(Optional) CoS rewrite

tos_rewrite

(Optional) ToS rewrite

inline_power

(Optional) Inline power

span

(Optional) SPAN

udld

(Optional) UDLD

mdix

(Optional) MDIX

tdr

(Optional) TDR

lnk_debounce

(Optional) Link debounce

lnk_debounce_time

(Optional) Link debounce time

fex_fabric

(Optional) FEX Fabric

dot1q_tunnel

(Optional) dot1q-tunnel

pvlan_trunk_mode

(Optional) Private-vlan trunk mode

port_group

(Optional) Port Group

port_group_members

(Optional) Port Group Members

eee_capable

(Optional) EEE (efficient-eth)

pfc_capable

(Optional) PFC Capable:

bkout_capable

(Optional) Breakout Capable:

buffer_boost_capable

(Optional) Buffer Boost Capable:

speed_group_capable

(Optional) Speed group capable

macsec_capable

(Optional) MACSEC capable

Command Mode

  • /exec

show interface counters

show interface <ifeth_ctr> counters [ snmp ] [ __readonly__ { TABLE_rx_counters <interface_rx> [ <eth_inbytes> ] [ <eth_inucast> ] [ <eth_inmcast> ] [ <eth_inbcast> ] [ <eth_l3in_bytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_bcastpkts> ] } { TABLE_tx_counters <interface_tx> [ <eth_outbytes> ] [ <eth_outucast> ] [ <eth_outmcast> ] [ <eth_outbcast> ] [ <eth_l3out_bytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_bcastpkts> ] } ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifeth_ctr

Enter interface type and number in module/slot format

counters

Show interface counters

snmp

(Optional) Show SNMP MIB values

__readonly__

(Optional) Read Only

interface_rx

(Optional) Interface index rx

interface_tx

(Optional) Interface index tx

TABLE_rx_counters

(Optional) show Rx counters

TABLE_tx_counters

(Optional) show Tx counters

eth_inbytes

(Optional) Bytes input

eth_inucast

(Optional) Unicasts input

eth_inmcast

(Optional) Multicasts input

eth_inbcast

(Optional) Broadcasts input

eth_outbytes

(Optional) Bytes output

eth_outucast

(Optional) Unicasts output

eth_outmcast

(Optional) Multicasts output

eth_outbcast

(Optional) Broadcasts output

eth_l3in_bytes

(Optional) L3 Rx bytes

eth_l3in_ucastpkts

(Optional) L3 Rx Unicast pkts

eth_l3in_mcastpkts

(Optional) L3 Rx Multicast pkts

eth_l3in_bcastpkts

(Optional) L3 Rx Broadcast pkts

eth_l3out_bytes

(Optional) L3 Tx bytes

eth_l3out_ucastpkts

(Optional) L3 Tx Unicast pkts

eth_l3out_mcastpkts

(Optional) L3 Tx Multicast pkts

eth_l3out_bcastpkts

(Optional) L3 Tx Broadcast pkts

Command Mode

  • /exec

show interface counters

show interface <ifid_ctr> counters [ snmp ] [ __readonly__ { TABLE_rx_counters <interface_rx> [ <eth_inpkts> ] [ <eth_inbytes> ] [ <eth_inucast> ] [ <eth_inmcast> ] [ <eth_inbcast> ] } { TABLE_tx_counters <interface_tx> [ <eth_outpkts> ] [ <eth_outbytes> ] [ <eth_outucast> ] [ <eth_outmcast> ] [ <eth_outbcast> ] } ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifid_ctr

Enter interface type and number in module/slot format

counters

Show interface counters

snmp

(Optional) Show SNMP MIB values

__readonly__

(Optional) Read Only

interface_rx

(Optional) Interface index rx

interface_tx

(Optional) Interface index tx

TABLE_rx_counters

(Optional) show Rx counters

TABLE_tx_counters

(Optional) show Tx counters

eth_inpkts

(Optional) Packets input

eth_inbytes

(Optional) Bytes input

eth_inucast

(Optional) Unicasts

eth_inmcast

(Optional) Multicasts

eth_inbcast

(Optional) Broadcasts

eth_outpkts

(Optional) Packets output

eth_outbytes

(Optional) Bytes output

eth_outucast

(Optional) Unicasts

eth_outmcast

(Optional) Multicasts

eth_outbcast

(Optional) Broadcasts

Command Mode

  • /exec

show interface counters

show interface counters [ module <module> ] [ __readonly__ { TABLE_rx_counters <interface_rx> [ <eth_inpkts> ] [ <eth_inbytes> ] [ <eth_inucast> ] [ <eth_inmcast> ] [ <eth_inbcast> ] [ <eth_l3in_bytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_bcastpkts> ] } { TABLE_tx_counters <interface_tx> [ <eth_outpkts> ] [ <eth_outbytes> ] [ <eth_outucast> ] [ <eth_outmcast> ] [ <eth_outbcast> ] [ <eth_l3out_bytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_bcastpkts> ] } ]

Syntax Description

show

Show running system information

interface

Show interface status and information

counters

Show interface counters

module

(Optional) Limit display to interfaces on module

module

(Optional) Enter module number

__readonly__

(Optional) Read Only

interface_rx

(Optional) Interface index rx

interface_tx

(Optional) Interface index tx

TABLE_rx_counters

(Optional) show Rx counters

TABLE_tx_counters

(Optional) show Tx counters

eth_inpkts

(Optional) Packets input

eth_inbytes

(Optional) Bytes input

eth_inucast

(Optional) Unicasts

eth_inmcast

(Optional) Multicasts

eth_inbcast

(Optional) Broadcasts

eth_outpkts

(Optional) Packets output

eth_outbytes

(Optional) Bytes output

eth_outucast

(Optional) Unicasts

eth_outmcast

(Optional) Multicasts

eth_outbcast

(Optional) Broadcasts

eth_l3in_bytes

(Optional) L3 Rx bytes

eth_l3in_ucastpkts

(Optional) L3 Rx Unicast pkts

eth_l3in_mcastpkts

(Optional) L3 Rx Multicast pkts

eth_l3in_bcastpkts

(Optional) L3 Rx Broadcast pkts

eth_l3out_bytes

(Optional) L3 Tx bytes

eth_l3out_ucastpkts

(Optional) L3 Tx Unicast pkts

eth_l3out_mcastpkts

(Optional) L3 Tx Multicast pkts

eth_l3out_bcastpkts

(Optional) L3 Tx Broadcast pkts

Command Mode

  • /exec

show interface counters

show interface counters [ non-zero ] [ __readonly__ { TABLE_rx_counters <interface_rx> [ <eth_inpkts> ] [ <eth_inbytes> ] [ <eth_inucast> ] [ <eth_inmcast> ] [ <eth_inbcast> ] [ <eth_l3in_bytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_bcastpkts> ] } { TABLE_tx_counters <interface_tx> [ <eth_outpkts> ] [ <eth_outbytes> ] [ <eth_outucast> ] [ <eth_outmcast> ] [ <eth_outbcast> ] [ <eth_l3out_bytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_bcastpkts> ] } ]

Syntax Description

show

Show running system information

interface

Show interface status and information

counters

Show interface counters

non-zero

(Optional) To display only the non-zero counter values

__readonly__

(Optional) Read Only

interface_rx

(Optional) Interface index rx

interface_tx

(Optional) Interface index tx

TABLE_rx_counters

(Optional) show Rx counters

TABLE_tx_counters

(Optional) show Tx counters

eth_inpkts

(Optional) Packets input

eth_inbytes

(Optional) Bytes input

eth_inucast

(Optional) Unicasts

eth_inmcast

(Optional) Multicasts

eth_inbcast

(Optional) Broadcasts

eth_outpkts

(Optional) Packets output

eth_outbytes

(Optional) Bytes output

eth_outucast

(Optional) Unicasts

eth_outmcast

(Optional) Multicasts

eth_outbcast

(Optional) Broadcasts

eth_l3in_bytes

(Optional) L3 Rx bytes

eth_l3in_ucastpkts

(Optional) L3 Rx Unicast pkts

eth_l3in_mcastpkts

(Optional) L3 Rx Multicast pkts

eth_l3in_bcastpkts

(Optional) L3 Rx Broadcast pkts

eth_l3out_bytes

(Optional) L3 Tx bytes

eth_l3out_ucastpkts

(Optional) L3 Tx Unicast pkts

eth_l3out_mcastpkts

(Optional) L3 Tx Multicast pkts

eth_l3out_bcastpkts

(Optional) L3 Tx Broadcast pkts

Command Mode

  • /exec

show interface counters

show interface <ifrange> counters [ __readonly__ TABLE_interface <interface> [ <overlay_load_interval> ] [ <overlay_rx_ucastpkts> ] [ <overlay_rx_ucastbytes> ] [ <overlay_rx_mcastpkts> ] [ <overlay_rx_mcastbytes> ] [ <overlay_rx_pkts> ] [ <overlay_rx_bytes> ] [ <overlay_rx_bcastpkts> ] [ <overlay_rx_bcastbytes> ] [ <overlay_rx_bitrate> ] [ <overlay_rx_pktrate> ] [ <overlay_tx_ucastpkts> ] [ <overlay_tx_ucastbytes> ] [ <overlay_tx_mcastpkts> ] [ <overlay_tx_mcastbytes> ] [ <overlay_tx_bcastpkts> ] [ <overlay_tx_bcastbytes> ] [ <overlay_tx_pkts> ] [ <overlay_tx_bytes> ] [ <overlay_tx_bitrate> ] [ <overlay_tx_pktrate> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifrange

Enter interface type and number

counters

Show interface counters

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

overlay_load_interval

(Optional) Load interval

overlay_rx_ucastpkts

(Optional) Received ucast pkts

overlay_rx_ucastbytes

(Optional) Received ucast bytes

overlay_rx_mcastpkts

(Optional) Received mcast pkts

overlay_rx_mcastbytes

(Optional) Received mcast bytes

overlay_rx_bcastpkts

(Optional) Received bcast pkts

overlay_rx_bcastbytes

(Optional) Received bcast bytes

overlay_rx_pkts

(Optional) Total received pkts

overlay_rx_bytes

(Optional) Total received bytes

overlay_rx_bitrate

(Optional) Receive bit rate

overlay_rx_pktrate

(Optional) Receive pkt rate

overlay_tx_ucastpkts

(Optional) Trasnmitted ucast pkts

overlay_tx_ucastbytes

(Optional) Trasnmitted ucast bytes

overlay_tx_mcastpkts

(Optional) Trasnmitted mcast pkts

overlay_tx_mcastbytes

(Optional) Trasnmitted mcast bytes

overlay_tx_bcastpkts

(Optional) Trasnmitted bcast pkts

overlay_tx_bcastbytes

(Optional) Trasnmitted bcast bytes

overlay_tx_pkts

(Optional) Total transmitted pkts

overlay_tx_bytes

(Optional) Total transmitted bytes

overlay_tx_bitrate

(Optional) Transmit bit rate

overlay_tx_pktrate

(Optional) Transmit pkt rate

Command Mode

  • /exec

show interface counters

show interface <ifrange> counters [ __readonly__ { TABLE_nve_counters <interface> [ <ucast_inbytes> ] [ <ucast_inpkts> ] [ <ucast_outbytes> ] [ <ucast_outpkts> ] [ <mcast_inbytes> ] [ <mcast_inpkts> ] [ <mcast_outbytes> ] [ <mcast_outpkts> ] } ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifrange

Enter interface type and number

counters

Show interface counters

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_nve_counters

(Optional) show interface

ucast_inbytes

(Optional) ucast bytes input

ucast_inpkts

(Optional) ucast packets input

ucast_outbytes

(Optional) ucast bytes output

ucast_outpkts

(Optional) ucast packets output

mcast_inbytes

(Optional) mcast bytes input

mcast_inpkts

(Optional) mcast packets input

mcast_outbytes

(Optional) mcast bytes output

mcast_outpkts

(Optional) mcast packets output

Command Mode

  • /exec

show interface counters brief

show interface counters brief [ <counter_val> ] [ __readonly__ TABLE_interface <interface> <eth_inrate1> <eth_inframes1> <eth_outrate1> <eth_outframes1> <eth_load_intv1> <eth_inrate2> <eth_inframes2> <eth_outrate2> <eth_outframes2> <eth_load_intv2> <eth_inrate3> <eth_inframes3> <eth_outrate3> <eth_outframes3> <eth_load_intv3> ]

Syntax Description

show

Show running system information

interface

Show interface status and information

counters

Show interface counters

brief

Show interface counters in brief

counter_val

(Optional) Specify a single load interval id to show the rates

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

eth_load_intv1

(Optional) interval 1 timer value in sec

eth_inrate1

(Optional) interval 1 input rate in mbps

eth_inframes1

(Optional) interval 1 input rate in frames (pkts)

eth_outrate1

(Optional) interval 1 output rate in mbps

eth_outframes1

(Optional) interval 1 output rate in output frames (pkts)

eth_load_intv2

(Optional) interval 2 timer value in sec

eth_inrate2

(Optional) interval 2 input rate in mbps

eth_inframes2

(Optional) interval 2 input rate in frames (pkts)

eth_outrate2

(Optional) interval 2 output rate in mbps

eth_outframes2

(Optional) interval 2 output rate in output frames (pkts)

eth_load_intv3

(Optional) interval 3 timer value in sec

eth_inrate3

(Optional) interval 3 input rate in mbps

eth_inframes3

(Optional) interval 3 input rate in frames (pkts)

eth_outrate3

(Optional) interval 3 output rate in mbps

eth_outframes3

(Optional) interval 3 output rate in output frames (pkts)

Command Mode

  • /exec

show interface counters brief

show interface <ifeth_ctr_brf> counters brief [ <counter_val> ] [ __readonly__ TABLE_interface <interface> <eth_load_intv1> <eth_inrate1> <eth_inframes1> <eth_outrate1> <eth_outframes1> <eth_load_intv2> <eth_inrate2> <eth_inframes2> <eth_outrate2> <eth_outframes2> <eth_load_intv3> <eth_inrate3> <eth_inframes3> <eth_outrate3> <eth_outframes3> ]

Syntax Description

show

Show running system information

interface

Show interface status and information

ifeth_ctr_brf

Enter interface type and number in module/slot format

counters

Show interface counters

brief

Show interface counters in brief

counter_val

(Optional) Specify a single load interval id to show the rates

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

eth_load_intv1

(Optional) interval 1 timer value in sec

eth_inrate1

(Optional) interval 1 input rate in mbps

eth_inframes1

(Optional) interval 1 input rate in frames (pkts)

eth_outrate1

(Optional) interval 1 output rate in mbps

eth_outframes1

(Optional) interval 1 output rate in output frames (pkts)

eth_load_intv2

(Optional) interval 2 timer value in sec

eth_inrate2

(Optional) interval 2 input rate in mbps

eth_inframes2

(Optional) interval 2 input rate in frames (pkts)

eth_outrate2

(Optional) interval 2 output rate in mbps

eth_outframes2

(Optional) interval 2 output rate in output frames (pkts)

eth_load_intv3

(Optional) interval 3 timer value in sec

eth_inrate3

(Optional) interval 3 input rate in mbps

eth_inframes3

(Optional) interval 3 input rate in frames (pkts)

eth_outrate3

(Optional) interval 3 output rate in mbps

eth_outframes3

(Optional) interval 3 output rate in output frames (pkts)

Command Mode

  • /exec

show interface counters detailed

show interface counters detailed [ snmp ] [ __readonly__ TABLE_interface <interface> [ <vdc_lvl_in_pkts> ] [ <vdc_lvl_in_bytes> ] [ <vdc_lvl_in_ucast> ] [ <vdc_lvl_in_mcast> ] [ <vdc_lvl_in_bcast> ] [ <vdc_lvl_in_bps> ] [ <vdc_lvl_in_pps> ] [ <vdc_lvl_in_avg_pkts> ] [ <vdc_lvl_in_avg_bytes> ] [ <vdc_lvl_out_pkts> ] [ <vdc_lvl_out_bytes> ] [ <vdc_lvl_out_ucast> ] [ <vdc_lvl_out_mcast> ] [ <vdc_lvl_out_bcast> ] [ <vdc_lvl_out_bps> ] [ <vdc_lvl_out_pps> ] [ <vdc_lvl_out_avg_pkts> ] [ <vdc_lvl_out_avg_bytes> ] [ <mgmt_in_pkts> ] [ <mgmt_in_bytes> ] [ <mgmt_in_mcast> ] [ <mgmt_in_compressed> ] [ <mgmt_in_errors> ] [ <mgmt_in_frame> ] [ <mgmt_in_overrun> ] [ <mgmt_in_fifo> ] [ <mgmt_out_pkts> ] [ <mgmt_out_bytes> ] [ <mgmt_out_underruns> ] [ <mgmt_out_errors> ] [ <mgmt_out_collisions> ] [ <mgmt_out_fifo> ] [ <mgmt_out_carrier> ] [ <mgmt_align_err> ] [ <mgmt_fcs_err> ] [ <mgmt_xmit_err> ] [ <mgmt_rcv_err> ] [ <mgmt_undersize> ] [ <mgmt_outdisc> ] [ <mgmt_single_col> ] [ <mgmt_multi_col> ] [ <mgmt_late_col> ] [ <mgmt_excess_col> ] [ <mgmt_carri_sen> ] [ <mgmt_runts> ] [ <mgmt_giants> ] [ <mgmt_sqetest_err> ] [ <mgmt_deferred_tx> ] [ <mgmt_inmactx_err> ] [ <mgmt_inmacrx_err> ] [ <mgmt_symbol_err> ] [ <loop_in_pkts> ] [ <loop_in_bytes> ] [ <loop_in_mcast> ] [ <loop_in_compressed> ] [ <loop_in_errors> ] [ <loop_in_frame> ] [ <loop_in_overrun> ] [ <loop_in_fifo> ] [ <loop_out_pkts> ] [ <loop_out_bytes> ] [ <loop_out_underruns> ] [ <loop_out_errors> ] [ <loop_out_collisions> ] [ <loop_out_fifo> ] [ <loop_out_carriers> ] [ <eth_load_interval1_rx> ] [ <eth_inrate1_bits> ] [ <eth_inrate1_pkts> ] [ <eth_load_interval1_tx> ] [ <eth_outrate1_bits> ] [ <eth_outrate1_pkts> ] [ <eth_inrate1_summary_bits> ] [ <eth_inrate1_summary_pkts> ] [ <eth_outrate1_summary_bits> ] [ <eth_outrate1_summary_pkts> ] [ <eth_load_interval2_rx> ] [ <eth_inrate2_bits> ] [ <eth_inrate2_pkts> ] [ <eth_load_interval2_tx> ] [ <eth_outrate2_bits> ] [ <eth_outrate2_pkts> ] [ <eth_inrate2_summary_bits> ] [ <eth_inrate2_summary_pkts> ] [ <eth_outrate2_summary_bits> ] [ <eth_outrate2_summary_pkts> ] [ <eth_load_interval3_rx> ] [ <eth_inrate3_bits> ] [ <eth_inrate3_pkts> ] [ <eth_load_interval3_tx> ] [ <eth_outrate3_bits> ] [ <eth_outrate3_pkts> ] [ <eth_inrate3_summary_bits> ] [ <eth_inrate3_summary_pkts> ] [ <eth_outrate3_summary_bits> ] [ <eth_outrate3_summary_pkts> ] [ <eth_inpkts> ] [ <eth_inucast> ] [ <eth_inmcast> ] [ <eth_inbcast> ] [ <eth_ingiants> ] [ <eth_inbytes> ] [ <eth_storm_supp> ] [ <eth_inb64> ] [ <eth_inb65_127> ] [ <eth_inb128_255> ] [ <eth_inb256_511> ] [ <eth_inb512_1023> ] [ <eth_inb1024_1518> ] [ <eth_inb1519_1548> ] [ <eth_intrunk> ] [ <eth_outpkts> ] [ <eth_outucast> ] [ <eth_outmcast> ] [ <eth_outbcast> ] [ <eth_outgiants> ] [ <eth_outbytes> ] [ <eth_outb64> ] [ <eth_outb65_127> ] [ <eth_outb128_255> ] [ <eth_outb256_511> ] [ <eth_outb512_1023> ] [ <eth_outb1024_1518> ] [ <eth_outb1519_1548> ] [ <eth_outtrunk> ] [ <eth_nobuf> ] [ <eth_runts> ] [ <eth_crc> ] [ <eth_ecc> ] [ <eth_overrun> ] [ <eth_underrun> ] [ <eth_ignored> ] [ <eth_bad_eth> ] [ <eth_bad_proto> ] [ <eth_in_ifdown_drops> ] [ <eth_coll> ] [ <eth_latecoll> ] [ <eth_lostcarrier> ] [ <eth_nocarrier> ] [ <eth_babbles> ] [ <eth_watchdog> ] [ <eth_dribble> ] [ <eth_inerr> ] [ <eth_outerr> ] [ <eth_deferred> ] [ <eth_jabbers> ] [ <eth_shortframe> ] [ <eth_single_coll> ] [ <eth_multi_coll> ] [ <eth_excess_coll> ] [ <eth_indiscard> ] [ <eth_bad_encap> ] [ <eth_outcrc> ] [ <eth_symbol> ] [ <eth_out_drops> ] [ <eth_bpdu_outlost> ] [ <eth_cos0_outlost> ] [ <eth_cos1_outlost> ] [ <eth_cos2_outlost> ] [ <eth_cos3_outlost> ] [ <eth_cos4_outlost> ] [ <eth_cos5_outlost> ] [ <eth_cos6_outlost> ] [ <eth_cos7_outlost> ] [ <eth_inpause> ] [ <eth_outpause> ] [ <eth_resets> ] [ <eth_sqetest> ] [ <eth_l2_ucastpkts> ] [ <eth_l2_ucastbytes> ] [ <eth_l2_mcastpkts> ] [ <eth_l2_mcastbytes> ] [ <eth_l2_bcastpkts> ] [ <eth_l2_bcastbytes> ] [ <eth_l3in_routed_pkts> ] [ <eth_l3in_routed_bytes> ] [ <eth_l3out_routed_pkts> ] [ <eth_l3out_routed_bytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_ucastbytes> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_mcastbytes> ] [ <eth_l3in_bcastpkts> ] [ <eth_l3in_bcastbytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_ucastbytes> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_mcastbytes> ] [ <eth_l3out_bcastpkts> ] [ <eth_l3out_bcastbytes> ] [ <eth_l3avg1_inbytes> ] [ <eth_l3avg1_inpkts> ] [ <eth_l3avg1_outbytes> ] [ <eth_l3avg1_outpkts> ] [ <eth_ipmcast> ] [ <eth_inhw_switched> ] [ <eth_insw_switched> ] [ <eth_throtles> ] [ <eth_frame> ] [ <eth_outhw_switched> ] [ <eth_outsw_switched> ] [ <eth_buffail> ] [ <eth_bufswapped> ] [ <eth_arpdrops> ] [ <eth_out_ifdown_drops> ] [ <eth_fcoe_in_pkts> ] [ <eth_fcoe_in_octets> ] [ <eth_fcoe_out_pkts> ] [ <eth_fcoe_out_octets> ] [ <eth_nfcoe_in_pkts> ] [ <eth_nfcoe_in_octets> ] [ <eth_nfcoe_out_pkts> ] [ <eth_nfcoe_out_octets> ] [ <svi_routed_pkts_in> ] [ <svi_routed_bytes_in> ] [ <svi_routed_pkts_out> ] [ <svi_routed_bytes_out> ] [ <svi_ucast_pkts_in> ] [ <svi_ucast_bytes_in> ] [ <svi_mcast_pkts_in> ] [ <svi_mcast_bytes_in> ] [ <svi_ucast_pkts_out> ] [ <svi_ucast_bytes_out> ] [ <svi_mcast_pkts_out> ] [ <svi_mcast_bytes_out> ] [ <svi_ipv4_ucast_pkts_in> ] [ <svi_ipv4_ucast_bytes_in> ] [ <svi_ipv4_ucast_pkts_out> ] [ <svi_ipv4_ucast_bytes_out> ] [ <svi_ipv4_mcast_pkts_in> ] [ <svi_ipv4_mcast_bytes_in> ] [ <svi_ipv4_mcast_pkts_out> ] [ <svi_ipv4_mcast_bytes_out> ] [ <svi_ipv6_ucast_pkts_in> ] [ <svi_ipv6_ucast_bytes_in> ] [ <svi_ipv6_ucast_pkts_out> ] [ <svi_ipv6_ucast_bytes_out> ] [ <svi_ipv6_mcast_pkts_in> ] [ <svi_ipv6_mcast_bytes_in> ] [ <svi_ipv6_mcast_pkts_out> ] [ <svi_ipv6_mcast_bytes_out> ] [ <svi_average_input_bits> ] [ <svi_average_input_packets> ] [ <svi_average_output_bits> ] [ <svi_average_output_packets> ] [ <svi_rate_in_mins> ] [ <svi_time_last_cleared> ] [ <svi_tx_load> ] [ <svi_rx_load> ] [ <svi_reliability> ] ]

Syntax Description

show

Show running system information

interface

Show interface status and information

counters

Show interface counters

detailed

Show only non-zero counters

snmp

(Optional) Show SNMP MIB values

__readonly__

(Optional) Read Only

TABLE_interface

(Optional) show interface

interface

(Optional) Interface index

vdc_lvl_in_pkts

(Optional) VDC level input packets

vdc_lvl_in_bytes

(Optional) VDC level input bytes

vdc_lvl_in_ucast

(Optional) VDC level input unicast packets

vdc_lvl_in_mcast

(Optional) VDC level input multicast packets

vdc_lvl_in_bcast

(Optional) VDC level input broadcast packets

vdc_lvl_in_bps

(Optional) VDC level input bytes per second

vdc_lvl_in_pps

(Optional) VDC level input packets per second

vdc_lvl_in_avg_pkts

(Optional) VDC level average input packets

vdc_lvl_in_avg_bytes

(Optional) VDC level average input bytes

vdc_lvl_out_pkts

(Optional) VDC level output packets

vdc_lvl_out_bytes

(Optional) VDC level output bytes

vdc_lvl_out_ucast

(Optional) VDC level output unicast packets

vdc_lvl_out_mcast

(Optional) VDC level output multicast packets

vdc_lvl_out_bcast

(Optional) VDC level output broadcast packets

vdc_lvl_out_bps

(Optional) VDC level output bytes per second

vdc_lvl_out_pps

(Optional) VDC level output packets per second

vdc_lvl_out_avg_pkts

(Optional) VDC level average output packets

vdc_lvl_out_avg_bytes

(Optional) VDC level average output bytes

mgmt_in_pkts

(Optional) Input packets

mgmt_in_bytes

(Optional) Input bytes

mgmt_in_mcast

(Optional) Input multicast frames

mgmt_in_compressed

(Optional) Input compressed

mgmt_in_errors

(Optional) Input errors

mgmt_in_frame

(Optional) Input frame errors

mgmt_in_overrun

(Optional) Input overrun

mgmt_in_fifo

(Optional) Input fifo

mgmt_out_pkts

(Optional) Output packets

mgmt_out_bytes

(Optional) Output bytes

mgmt_out_underruns

(Optional) Output overruns

mgmt_out_errors

(Optional) Output errors

mgmt_out_collisions

(Optional) Output collisions

mgmt_out_fifo

(Optional) Output fifo

mgmt_out_carrier

(Optional) Output carrier errors

mgmt_align_err

(Optional) Align error

mgmt_fcs_err

(Optional) FCS error

mgmt_xmit_err

(Optional) Transmit error

mgmt_rcv_err

(Optional) Receive error

mgmt_undersize

(Optional) Undersize

mgmt_outdisc

(Optional) Out discard

mgmt_single_col

(Optional) Single collision

mgmt_multi_col

(Optional) Multiple collision

mgmt_late_col

(Optional) Late collision

mgmt_excess_col

(Optional) Excess collision

mgmt_carri_sen

(Optional) Carrier sense

mgmt_runts

(Optional) Runts

mgmt_giants

(Optional) Giants

mgmt_sqetest_err

(Optional) SQETest error

mgmt_deferred_tx

(Optional) Deferred tx

mgmt_inmactx_err

(Optional) In MAC tx

mgmt_inmacrx_err

(Optional) In MAC rx

mgmt_symbol_err

(Optional) Symbol error

loop_in_pkts

(Optional) Input packets

loop_in_bytes

(Optional) Input bytes

loop_in_mcast

(Optional) Input multicast

loop_in_compressed

(Optional) Input compressed

loop_in_errors

(Optional) Input errors

loop_in_frame

(Optional) Input frame errors

loop_in_overrun

(Optional) Input overrun

loop_in_fifo

(Optional) Input fifo

loop_out_pkts

(Optional) Output packets

loop_out_bytes

(Optional) Output bytes

loop_out_underruns

(Optional) Output underruns

loop_out_errors

(Optional) Output errors

loop_out_collisions

(Optional) Output collisions

loop_out_fifo

(Optional) Output fifo

loop_out_carriers

(Optional) Output carrier errors

eth_load_interval1_rx

(Optional) interval 1 timer value in sec

eth_inrate1_bits

(Optional) interval 1 input rate bits/sec

eth_inrate1_pkts

(Optional) interval 1 input rate pkts/sec

eth_load_interval1_tx

(Optional) interval 1 timer value in sec

eth_outrate1_bits

(Optional) interval 1 output rate bits/sec

eth_outrate1_pkts

(Optional) interval 1 output rate pkts/sec

eth_inrate1_summary_bits

(Optional) interval 1 input rate bit summary

eth_inrate1_summary_pkts

(Optional) interval 1 input rate pkt summary

eth_outrate1_summary_bits

(Optional) interval 1 output rate bit summary

eth_outrate1_summary_pkts

(Optional) interval 1 output rate pkt summary

eth_load_interval2_rx

(Optional) interval 2 timer value in sec

eth_inrate2_bits

(Optional) interval 2 input rate bits/sec

eth_inrate2_pkts

(Optional) interval 2 input rate pkts/sec

eth_load_interval2_tx

(Optional) interval 2 timer value in sec

eth_outrate2_bits

(Optional) interval 2 output rate bits/sec

eth_outrate2_pkts

(Optional) interval 2 output rate pkts/sec

eth_inrate2_summary_bits

(Optional) interval 2 input rate bit summary

eth_inrate2_summary_pkts

(Optional) interval 2 input rate pkt summary

eth_outrate2_summary_bits

(Optional) interval 2 output rate bit summary

eth_outrate2_summary_pkts

(Optional) interval 2 output rate pkt summary

eth_load_interval3_rx

(Optional) interval 3 timer value in sec

eth_inrate3_bits

(Optional) interval 3 input rate bits/sec

eth_inrate3_pkts

(Optional) interval 3 input rate pkts/sec

eth_load_interval3_tx

(Optional) interval 3 timer value in sec

eth_outrate3_bits

(Optional) interval 3 output rate bits/sec

eth_outrate3_pkts

(Optional) interval 3 output rate pkts/sec

eth_inrate3_summary_bits

(Optional) interval 3 input rate bit summary

eth_inrate3_summary_pkts

(Optional) interval 3 input rate pkt summary

eth_outrate3_summary_bits

(Optional) interval 3 output rate bit summary

eth_outrate3_summary_pkts

(Optional) interval 3 output rate pkt summary

eth_inpkts

(Optional) Packets input

eth_inucast

(Optional) Unicasts

eth_inmcast

(Optional) Multicasts

eth_inbcast

(Optional) Broadcasts

eth_ingiants

(Optional) giants

eth_inbytes

(Optional) Bytes input

eth_storm_supp

(Optional) storm suppression

eth_inb64

(Optional) input pkts between 0 and 64 bytes

eth_inb65_127

(Optional) input pkts between 65 and 127 bytes

eth_inb128_255

(Optional) input pkts between 128 and 255 bytes

eth_inb256_511

(Optional) input pkts between 256 and 511 bytes

eth_inb512_1023

(Optional) input pkts between 512 and 1023 bytes

eth_inb1024_1518

(Optional) input pkts between 1024 and 1518 bytes

eth_inb1519_1548

(Optional) input pkts between 1519 and 1548 bytes

eth_intrunk

(Optional) input trunk pkts

eth_outpkts

(Optional) packets output

eth_outucast

(Optional) Unicasts

eth_outmcast

(Optional) Multicasts

eth_outbcast

(Optional) Broadcasts

eth_outgiants

(Optional) giants

eth_outbytes

(Optional) bytes output