- New and Changed Information for Cisco NX-OS Releases
- New and Changed Information for Cisco NX-OS Release 5.2(1)N1(1)
- New and Changed Information for Cisco NX-OS Release 5.1(3)N1(1)
- New and Changed Information for Cisco NX-OS Release 5.0(3)N2(1)
- New and Changed Information for Cisco NX-OS Release 5.0(3)N1(1)
- New and Changed Information for Cisco NX-OS Release 5.0(2)N2(1)
- New and Changed Information for Cisco NX-OS Release 5.0(2)N1(1)
- New and Changed Information for Cisco NX-OS Release 4.2(1)N1(1)
- New and Changed Information for Cisco NX-OS Release 4.1(3)N1(1)
- New and Changed Information for Cisco NX-OS Release 4.0(0)N1(1a)
- New and Changed Information for Cisco NX-OS Release 4.0
New and Changed Information
This chapter provides release-specific information for each new and changed feature in the Cisco Nexus 5000 Series NX-OS Fibre Channel Command Reference. The latest version of this document is available at the following Cisco website:
http://www.cisco.com/en/US/products/ps9670/prod_command_reference_list.html
To check for additional information about this Cisco NX-OS Release, see the Cisco Nexus 5000 Series Switch Release Notes available at the following Cisco website:
http://www.cisco.com/en/US/products/ps9670/prod_release_notes_list.html
New and Changed Information for Cisco NX-OS Releases
This section includes the following topics:
•New and Changed Information for Cisco NX-OS Release 5.2(1)N1(1)
•New and Changed Information for Cisco NX-OS Release 5.2(1)N1(1)
•New and Changed Information for Cisco NX-OS Release 5.0(3)N2(1)
•New and Changed Information for Cisco NX-OS Release 5.0(3)N1(1)
•New and Changed Information for Cisco NX-OS Release 5.0(2)N2(1)
•New and Changed Information for Cisco NX-OS Release 5.0(2)N1(1)
•New and Changed Information for Cisco NX-OS Release 4.2(1)N1(1)
•New and Changed Information for Cisco NX-OS Release 4.1(3)N1(1)
•New and Changed Information for Cisco NX-OS Release 4.0(0)N1(1a)
•New and Changed Information for Cisco NX-OS Release 4.0
New and Changed Information for Cisco NX-OS Release 5.2(1)N1(1)
There are no new or changed commands for Cisco NX-OS Release 5.2(1)N1(1).
New and Changed Information for Cisco NX-OS Release 5.1(3)N1(1)
summarizes the new and changed commands for Cisco NX-OS Release 5.1(3)N1(1) and tells you where they are documented.
|
|
|
---|---|---|
Release 5.1(3)N1(1) |
||
CiscoAdapter Fabric Extender (Adapter-FEX) |
This feature was introduced. The following commands were updated to support Adapter-FEX: •bind •feature-set virtualization •interface vethernet |
|
Boot from SAN on virtual port channel (vPC) |
This feature was introduced. The following commands were added to support this feature: •fcoe •channel mode active •switchport •show interface san-port-channel •show running-config interface san-port-channel The following commands were updated to support this feature: •bind •interface san-port-channel •shutdown |
channel mode active (SAN PortChannel) show interface san-port-channel |
Fabric Binding |
The feature fabric-binding command was added. This command replaced the fabric-binding enable command. |
|
Fibre Channel over Ethernet (FCoE) over Adapter-FEX |
This feature was introduced. |
|
Virtual Ethernet interfaces |
This feature was introduced. |
install feature-set virtualization |
SAN Port Channel |
The following commands were updated: •interface san-port-channel The following keywords, which in earlier releases were part of the interface san-port-channel command, now appear as independent commands: •description •shutdown •switchport |
New and Changed Information for Cisco NX-OS Release 5.0(3)N2(1)
summarizes the new and changed commands for Cisco NX-OS Release 5.0(3)N2(1) and tells you where they are documented.
|
|
|
---|---|---|
Release 5.0(3)N2(1) |
||
Fibre Channel over Ethernet (FCoE) |
This feature was introduced. |
switchport (virtual Fibre Channel interface) |
New and Changed Information for Cisco NX-OS Release 5.0(3)N1(1)
There were no new and changed commands for Cisco NX-OS Release 5.0(3)N1(1).
New and Changed Information for Cisco NX-OS Release 5.0(2)N2(1)
summarizes the new and changed commands for Cisco NX-OS Release 5.0(2)N2(1) and tells you where they are documented.
New and Changed Information for Cisco NX-OS Release 5.0(2)N1(1)
summarizes the new and changed commands for Cisco NX-OS Release 5.0(2)N1(1) and tells you where they are documented.
|
|
|
---|---|---|
Release 5.0(2)N1(1) |
||
Virtual Fibre Channel interface |
The following commands were updated: •interface vfc •switchport mode trunk The following keywords, which in earlier releases were part of the interface vfc command, now appear as independent commands for configuring virtual Fibre Channel interfaces: •bind •description •shutdown •switchport |
description (virtual Fibre Channel interface) switchport (virtual Fibre Channel interface) |
New and Changed Information for Cisco NX-OS Release 4.2(1)N1(1)
summarizes the new and changed commands for Cisco NX-OS Release 4.2(1)N1(1) and tells you where they are documented.
New and Changed Information for Cisco NX-OS Release 4.1(3)N1(1)
summarizes the new and changed commands for Cisco NX-OS Release 4.1(3)N1(1) and tells you where they are documented.
New and Changed Information for Cisco NX-OS Release 4.0(0)N1(1a)
summarizes the new and changed commands for Cisco NX-OS Release 4.0(0)N1(1a) and tells you where they are documented.
|
|
|
---|---|---|
Release 4.0(0)N1(1a) |
||
Support for virtual Fibre Channel (vFC) interface |
This feature was introduced. |
description (virtual Fibre Channel interface) switchport (virtual Fibre Channel interface) |
N Port |
The following features were introduced: •N Port Identifier Virtualization (NPIV) •N Port Virtualization (NPV) |
|
Fabric-Device Management Interface (FDMI) |
This feature was introduced. |
|
Fibre Channel over Ethernet (FCoE) |
This feature was introduced. |
|
Cisco Fabric Services (CFS) |
This feature was introduced. |
|
Fabric Binding |
This feature was introduced. |
|
Port tracking |
This feature was introduced. |
|
Fibre Channel Port Security |
This feature was introduced. |
|
Fibre Channel |
Several commands were added or updated to support Fibre Channel configurations. |
|
WWN |
This feature was introduced. |
|
SAN Port Channel |
This feature was introduced. |
|
Fibre Channel Security Protocol (FC-SP) |
This feature was introduced. |
|
Fabric Shortest Path First (FSPF) |
This feature was introduced. |
|
Registered Link Incident Report (RLIR) |
This feature was introduced. |
|
Registered State Change Notification (RSCN) |
This feature was introduced. |
|
Zoning |
This feature was introduced. |
member (zone configuration mode) member (zoneset configuration mode) system default zone default-zone permit system default zone distribute full zone name (configuration mode) zone name (zone set configuration mode) |
New and Changed Information for Cisco NX-OS Release 4.0
summarizes the new and changed commands for Cisco NX-OS Release 4.0 and tells you where they are documented.
|
|
|
---|---|---|
Release 4.0 |
||
Fibre Channel |
This feature was introduced. |