Cisco Nexus 5000 Series Interfaces Command Reference

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: November 1, 2016

Chapter: R Commands

resync-database

R Commands

resync-database

resync-database

To resynchronize the switch profile databases, use the resync-database command.

resync-database

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

Switch profile configuration mode

Command History

Release	Modification
5.0(2)N2(1)	This command was introduced.

Examples

This example shows how to resynchronize the switch profile databases:

switch# configure sync
Enter configuration commands, one per line. End with CNTL/Z.
switch(config-sync)# resync-database
Re-synchronization of switch-profile db takes a few minutes...
Re-synchronize switch-profile db completed successfully.
switch(config-sync)#

Related Commands

Command	Description
switch-profile	Configures a switch profile.

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)