feature lacp
To enable the Link Aggregation Control Protocol (LACP), which bundles a number of physical ports together to form a single logical channel, use the feature lacp command. To disable LACP on the switch, use the no form of this command.
feature lacp
no feature lacp
Syntax Description
This command has no arguments or keywords.
Command Default
LACP is disabled.
Command Modes
Global configuration mode
Command History
Release |
Modification |
---|---|
4.0(0)N1(1a) |
This command was introduced. |
Usage Guidelines
You must remove all the LACP configuration parameters from all EtherChannels on the switch before you can disable LACP.
Even after you enable LACP globally, you do not have to run LACP on all EtherChannels on the switch. You enable LACP on each channel mode using the channel-group mode command.
Examples
This example shows how to enable LACP EtherChannels on the switch:
switch(config)# feature lacp