Cisco Nexus 5500 Series NX-OS TrustSec Command Reference

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents
Find Matches in This Book

Results

Updated:
December 7, 2011

Chapter: F Commands

F Commands

This chapter describes the Cisco NX-OS TrustSec commands that begin with F.

feature cts

To enable the Cisco TrustSec feature, use the feature cts command. To revert to the default, use the no form of this command.

feature cts

no feature cts

 
Syntax Description

This command has no arguments or keywords.

 
Command Default

Disabled

 
Command Modes

Global configuration mode

 
Command History

Release
Modification

5.2(1)N1(1)

This command was introduced.

 
Usage Guidelines

To use this command, you must enable the Cisco TrustSec feature using the feature dot1x command.

This command does not require a license.

Examples

This example shows how to enable the Cisco TrustSec feature:

switch# configure terminal
switch(config)# feature cts
switch(config)#
 

This example shows how to disable the Cisco TrustSec feature:

switch# configure terminal
switch(config)# no feature cts
switch(config)#
 

 
Related Commands

Command
Description

feature dot1x

Enables the 802.1X feature.

show cts

Displays the Cisco TrustSec status information.

 

feature dot1x

To enable the 802.1X feature, use the feature dot1x command. To revert to the default setting, use the no form of this command.

feature dot1x

no feature dot1x

 
Syntax Description

This command has no arguments or keywords.

 
Command Default

Disabled

 
Command Modes

Global configuration mode

 
Command History

Release
Modification

5.2(1)N1(1)

This command was introduced.

 
Usage Guidelines

You must use the feature dot1x command before you enable the Cisco TrustSec feature on the switch by using the feature cts command.

This command does not require a license.

Examples

This example shows how to enable 802.1X:

switch# configure terminal
switch(config)# feature dot1x
switch(config)#
 

This example shows how to disable 802.1X:

switch# configure terminal
switch(config)# no feature dot1x
switch(config)#
 

 
Related Commands

Command
Description

show dot1x

Displays 802.1X status information.

feature cts

Enables the Cisco TrustSec feature on the switch.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco