Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- April 25, 2017
Chapter: C Commands
C Commands
This chapter describes the Cisco NX-OS routing commands that begin with C.
clear ip mroute
To clear the multicast routes, use the clear ip mroute command.
clear ip mroute { * | group | group-prefix } [ source-tree | shared-tree | vrf { vrf-name | all }]
Syntax Description
Command Default
Command Modes
Command History
|
|
|
Usage Guidelines
This command does not require a license.
The clear ip mroute command is used for debugging purposes. However, this command is not supported for group-prefix option, i.e., subnet routes.
The statistics keyword is not supported in the clear ip mroute command.
Examples
This example shows how to clear all the multicast routes.
This example shows the status of the multicast routes, before you execute the clear ip mroute command.
This example shows the status of the multicast routes after the clear ip mroute * command.
Related Commands
|
|
|
|---|---|
Feedback