Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- March 16, 2014
Chapter: Show Commands
- show forwarding distribution ip igmp snooping
- show forwarding distribution ipv6 multicast route
- show forwarding distribution multicast
- show forwarding distribution multicast client
- show forwarding distribution multicast outgoing-interface-list
- show forwarding distribution multicast route
- show forwarding ipv6 multicast route
- show forwarding multicast outgoing-interface-list
- show forwarding multicast route
- show ip igmp event-history
- show ip igmp groups
- show ip igmp interface
- show ip igmp local-groups
- show ip igmp route
- show ip igmp snooping
- show ip igmp snooping event-history
- show ip igmp snooping explicit-tracking
- show ip igmp snooping groups
- show ip igmp snooping mrouter
- show ip igmp snooping querier
- show ip igmp snooping statistics
- show ip mroute
- show ip mroute summary
- show ip msdp count
- show ip msdp event-history
- show ip msdp mesh-group
- show ip msdp peer
- show ip msdp policy statistics sa-policy
- show ip msdp route
- show ip msdp rpf
- show ip msdp sa-cache
- show ip msdp route
- show ip msdp sources
- show ip msdp summary
- show ip netstack mroute
- show ip pim df
- show ip pim event-history
- show ip pim group-range
- show ip pim interface
- show ip pim neighbor
- show ip pim oif-list
- show ip pim policy statistics auto-rp
- show ip pim policy statistics bsr
- show ip pim policy statistics jp-policy
- show ip pim policy statistics neighbor-policy
- show ip pim policy statistics register-policy
- show ip pim route
- show ip pim rp
- show ip pim rp-hash
- show ip pim statistics
- show ip pim vrf
- show ip static-route
- show ipv6 mld groups
- show ipv6 mld local-groups
- show ipv6 mroute
- show ipv6 mroute summary
- show ipv6 pim df
- show ipv6 pim event-history
- show ipv6 pim group-range
- show ipv6 pim interface
- show ipv6 pim neighbor
- show ipv6 pim oif-list
- show ipv6 pim policy statistics jp-policy
- show ipv6 pim policy statistics neighbor-policy
- show ipv6 pim route
- show ipv6 pim rp
- show ipv6 pim rp-hash
- show ipv6 pim statistics
- show ipv6 pim vrf
- show routing ip multicast event-history
- show hardware proxy layer-3 detail
- show routing ipv6 multicast
- show routing ipv6 multicast clients
- show routing ipv6 multicast event-history
- show routing multicast
- show routing multicast clients
- show running-config igmp
- show running-config msdp
- show running-config pim
- show running-config pim6
- show startup-config igmp
- show startup-config msdp
- show startup-config pim
- show startup-config pim6
Show Commands
This chapter describes the Cisco NX-OS multicast routing show commands.
show forwarding distribution ip igmp snooping
To display information about Layer 2 IGMP snooping multicast Forwarding Information Base (FIB) distribution, use the show forwarding distribution ip igmp snooping command.
show forwarding distribution ip igmp snooping [ vlan vlan-id [ group group-addr [ source source-addr ]]]
Syntax Description
(Optional) Specifies a VLAN. The range is from 1 to 3967 and 4048 to 4093. |
|
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information about Layer 2 IGMP snooping multicast FIB distribution:
switch(config)# show forwarding distribution ip igmp snooping
Related Commands
|
|
|
|---|---|
Tests the forwarding distribution performance of the Forwarding Information Base (FIB). |
show forwarding distribution ipv6 multicast route
To display information about the multicast IPv6 FIB routes, use the show forwarding distribution ipv6 multicast route command.
show forwarding distribution ipv6 multicast route [ table table_id | vrf vrf-name ] [ group [ source ] | summary ]
Syntax Description
(Optional) Specifies a table ID. The range is from 0x0 to 0xffffffff. |
|
(Optional) Specifies a virtual routing and forwarding (VRF) name. The name can be a maximum of 32 alphanumeric characters. |
|
Defaults
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information about the multicast IPv6 FIB routes:
switch(config)# show forwarding distribution ipv6 multicast route
show forwarding distribution multicast
To display information about multicast Forwarding Information Base (FIB) distribution messages, use the show forwarding distribution multicast command.
show forwarding distribution multicast [ messages ]
Syntax Description
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information about multicast distribution messages:
switch(config)# show forwarding distribution multicast
show forwarding distribution multicast client
To display information about the multicast Forwarding Information Base (FIB) distribution client, use the show forwarding distribution multicast client command.
show forwarding distribution multicast client
Syntax Description
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information about the multicast FIB distribution client:
switch# show forwarding distribution multicast client
show forwarding distribution multicast outgoing-interface-list
To display information about the multicast Forwarding Information Base (FIB) outgoing interface (OIF) list, use the show forwarding distribution multicast outgoing-interface-list command.
show forwarding distribution multicast outgoing-interface-list { L2 | L3 } [ index ]
Syntax Description
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information about the multicast OIF list for Layer 3:
switch# show forwarding distribution multicast outgoing-interface-list L3
show forwarding distribution multicast route
To display information about the multicast Forwarding Information Base (FIB) distribution routes, use the show forwarding distribution multicast route command.
show forwarding distribution [ ip | ipv4 ] multicast route [ table id | vrf vrf_name ] [[ group { group-addr [ mask ] | group-prefix }] [ source { source-addr [ source-mask ] | source-prefix }] | summary ]
Syntax Description
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information about all the multicast FIB distribution routes:
switch(config)# show forwarding distribution multicast route
show forwarding ipv6 multicast route
To display information about the IPv6 multicast routes, use the show forwarding ipv6 multicast route command.
show forwarding [ vrf { vrf-name | all }] ipv6 multicast route {[ group { group | group-addr } | source { source | source-addr } | module num | vrf { vrf-name | all }] | summary [ module num | vrf { vrf-name | all }]}
Syntax Description
(Optional) Displays routes for a specific virtual routing and forwarding (VRF) instance. |
|
VRF name. The name can be a maximum of 32 alphanumeric characters and is case sensitive. |
|
Defaults
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information about the IPv6 multicast routes:
switch(config)# show forwarding ipv6 multicast route
switch(config)#
show forwarding multicast outgoing-interface-list
To display information about the multicast Forwarding Information Base (FIB) outgoing interface (OIF) list, use the show forwarding multicast outgoing-interface-list command.
show forwarding multicast outgoing-interface-list [ module num ] [ index ]
Syntax Description
(Optional) OIF list index. The OIF list index is from 1 to 65535. |
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information about the multicast FIB OIF list:
switch# show forwarding multicast outgoing-interface-list
Outgoing Interface List Index: 1
Reference Count: 1
Ethernet1/5
switch#
Related Commands
|
|
|
|---|---|
show forwarding multicast route
To display information about the IPv4 Forwarding Information Base (FIB) multicast routes, use the show forwarding multicast route command.
show forwarding [ vrf { vrf-name | all }] [ ip | ipv4 ] multicast route {[ group { group-addr [ group-mask ] | group-prefix } | source { source-addr [ source-mask ] | source-prefix } | module num | vrf { vrf-name | all }] | summary [ module num | vrf { vrf-name | all }]}
Syntax Description
(Optional) Displays information for a specified virtual routing and forwarding (VRF) instance. |
|
VRF name. The name can be a maximum of 32 alphanumeric characters and is case sensitive. |
|
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information about the IPv4 multicast FIB routes:
switch# show forwarding multicast route
This example shows how to display the summary information about the IPv4 multicast FIB routes:
switch# show forwarding multicast route summary
Related Commands
|
|
|
|---|---|
show ip igmp event-history
To display information in the IGMP event history buffers, use the show ip igmp event-history command.
show ip igmp event-history { clis | debugs | errors | events | ha | igmp-internal | msgs | mtrace | policy | statistics | vrf }
Syntax Description
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information in the IGMP HA event history buffer:
switch(config)# show ip igmp event-history ha
Related Commands
|
|
|
|---|---|
show ip igmp groups
To display information about IGMP-attached group membership, use the show ip igmp groups command.
show ip igmp groups [{ source [ group ]} | { group [ source ]}] [ ethernet slot / port | port-channel channel-number [. sub_if_number ] | vethernet veth-id | vlan vlan-id ] [ vrf { vrf-name | all }]
Syntax Description
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
The show ip igmp route command is an alternative form of this command.
Examples
This example shows how to display information about the IGMP-attached group membership:
switch(config)# show ip igmp groups
IGMP Connected Group Membership for VRF "default" - 0 total entries
Type: S - Static, D - Dynamic, L - Local, T - SSM Translated
Group Address Type Interface Uptime Expires Last Reporter
switch(config)#
Related Commands
|
|
|
|---|---|
Displays information about the IGMP-attached group membership. |
show ip igmp interface
To display information about IGMP on interfaces, use the show ip igmp interface command.
show ip igmp interface { ethernet slot / port | port-channel channel-number [. sub_if_number ] | vethernet veth-id | vlan vlan-id }
show ip igmp interface [ brief ] [ vrf { vrf-name | all }]
Syntax Description
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Changed output to include vPC information when IGMP is in vPC mode. |
Usage Guidelines
Examples
This example shows how to display information about IGMP on an interface (if IGMP is not in vPC mode, the vPC information is not displayed):
switch(config)# show ip igmp interface vlan 5
This example shows how to display information about IGMP on an interface in a brief format:
switch(config)# show ip igmp interface brief
show ip igmp local-groups
To display information about IGMP local groups, use the show ip igmp local-groups command.
show ip igmp local-groups [ ethernet slot / port | port-channel channel-number [. sub_if_number ] | vethernet veth-id | vlan vlan-id ] [ vrf { vrf-name | all }]
Syntax Description
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information about IGMP local groups:
switch(config)# show ip igmp local-groups
show ip igmp route
To display information about the IGMP-attached group membership, use the show ip igmp route command.
show ip igmp route [{ source [ group ]} | { group [ source ]}] [ ethernet slot / port | port-channel channel-number [. sub_if_number ] | vethernet veth-id | vlan vlan-id ] [ vrf { vrf-name | all }]
Syntax Description
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
The show ip igmp groups command is an alternative form of this command.
Examples
This example shows how to display information about the IGMP-attached group membership:
switch# show ip igmp route
IGMP Connected Group Membership for VRF "default" - 1 total entries
Type: S - Static, D - Dynamic, L - Local, T - SSM Translated
Group Address Type Interface Uptime Expires Last Reporter
230.0.0.0 S Ethernet1/5 00:31:47 never 0.0.0.0
switch#
Related Commands
|
|
|
|---|---|
Displays information about the IGMP-attached group membership. |
show ip igmp snooping
To display information about IGMP snooping, use the show ip igmp snooping command.
show ip igmp snooping [ vlan vlan-id ]
Syntax Description
(Optional) Specifies a VLAN. The range is from 1 to 3967 and 4048 to 4093. The default is all VLANs. |
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information about IGMP snooping for a VLAN:
switch(config)# show ip igmp snooping vlan 20
show ip igmp snooping event-history
To display information in the IGMP snooping event history buffers, use the show ip igmp snooping event-history command.
show ip igmp snooping event-history { vpc | igmp-snoop-internal | mfdm | mfdm-sum | vlan | vlan-events }
Syntax Description
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information in the IGMP snooping VLAN event history buffer:
Related Commands
|
|
|
|---|---|
Configures the size of the IGMP snooping event history buffers. |
|
Clears information in the IGMP snooping event history buffers. |
show ip igmp snooping explicit-tracking
To display information about explicit tracking for IGMP snooping, use the show ip igmp snooping explicit-tracking command.
show ip igmp snooping explicit-tracking [ vlan vlan-id ]
Syntax Description
(Optional) Specifies a VLAN. The range is from 1 to 3967 and 4048 to 4093. |
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
This command was changed to make the vlan argument optional. |
Usage Guidelines
When you use this command without the optional vlan argument, the system displays information for all VLANs.
Examples
This example shows how to display information about explicit tracking for IGMP snooping for VLAN 33:
switch# show ip igmp snooping explicit-tracking vlan 33
Related Commands
|
|
|
|---|---|
Clears the IGMP snooping explicit host tracking information for VLANs. |
|
Enables tracking of IGMPv3 membership reports from individual hosts for each port on a VLAN. |
show ip igmp snooping groups
To display information about the group membership for IGMP snooping, use the show ip igmp snooping groups command.
show ip igmp snooping groups [{ source [ group ]} | { group [ source ]}] [ vlan vlan-id ] [ detail ]
Syntax Description
(Optional) Specifies a VLAN. The range is from 1 to 3967 and 4048 to 4093. |
|
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information about the group membership for IGMP snooping:
switch(config)# show ip igmp snooping groups
show ip igmp snooping mrouter
To display the multicast routers detected by IGMP snooping, use the show ip igmp snooping mrouter command.
show ip igmp snooping mrouter [ vlan vlan-id ]
Syntax Description
(Optional) Specifies a VLAN. The range is from 1 to 3967 and 4048 to 4093. |
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display the multicast routers detected by IGMP snooping:
switch(config)# show ip igmp snooping mrouter
show ip igmp snooping querier
To display information about IGMP snooping queriers, use the show ip igmp snooping querier command.
show ip igmp snooping querier [ vlan vlan-id ]
Syntax Description
(Optional) Specifies a VLAN. The range is from 1 to 3967 and 4048 to 4093. |
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information about IGMP snooping queriers:
switch(config)# show ip igmp snooping querier
show ip igmp snooping statistics
To display information about IGMP snooping statistics, use the show ip igmp snooping statistics command.
show ip igmp snooping statistics [ vlan vlan-id | global ]
Syntax Description
(Optional) Specifies a VLAN. The range is from 1 to 3967 and 4048 to 4093. |
|
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Changed command to make the vlan argument optional and to introduce the optional global argument. |
Usage Guidelines
When you use this command without any options, the system prints statistics for all VLANs.
Examples
This example shows how to display information about IGMP snooping statistics for VLAN 1:
switch(config)# show ip igmp snooping statistics vlan 1
show ip mroute
To display information about IPv4 multicast routes, use the show ip mroute command.
show ip mroute { group | { source group } | { group [ source ]}} [ summary [ software-forwarded ]] [ vrf { vrf-name | all }]
Syntax Description
(Optional) Applies to a virtual routing and forwarding (VRF) instance. |
|
VRF name. The name can be a maximum of 32 alphanumeric characters and is case sensitive. |
|
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information about IPv4 multicast routes:
switch(config)# show ip mroute
The display specifies the interface established for each one and shows the router owners. In the case of the first paragraph in the display, the route owner is igmp ip pim. iod is an internal representation the device uses for the interface.
Related Commands
|
|
|
|---|---|
show ip mroute summary
To display summary information about IPv4 multicast routes, use the show ip mroute summary command.
show ip mroute summary [ count | software-forwarded ] [ vrf { vrf-name | all }]
show ip mroute [ group ] summary [ software-forwarded ] [ vrf { vrf-name | all }]
Syntax Description
(Optional) Applies to a virtual routing and forwarding (VRF) instance. |
|
VRF name. The name can be a maximum of 32 alphanumeric characters and is case sensitive. |
|
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display summary information about IPv4 multicast routes:
switch(config)# show ip mroute summary
This example shows how to display the number of IPv4 multicast routes:
switch# show ip mroute summary count
Related Commands
|
|
|
|---|---|
show ip msdp count
To display information about Multicast Source Discovery Protocol (MSDP) counts, use the show ip msdp count command.
show ip msdp count [ asn ] [ vrf { vrf-name | all }]
Syntax Description
(Optional) Applies to a virtual routing and forwarding (VRF) instance. |
|
VRF name. The name can be a maximum of 32 alphanumeric characters and is case sensitive. |
|
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display MSDP counts:
switch(config)# show ip msdp count
show ip msdp event-history
To display information in the Multicast Source Discovery Protocol (MSDP) event history buffers, use the show ip msdp event-history command.
show ip msdp event-history { errors | msgs | statistics }
Syntax Description
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information in the MSDP msgs event history buffer:
switch(config)# show ip msdp event-history msgs
Related Commands
|
|
|
|---|---|
show ip msdp mesh-group
To display information about Multicast Source Discovery Protocol (MSDP) mesh groups, use the show ip msdp mesh-group command.
show ip msdp mesh-group [ mesh-group ] [ vrf { vrf-name | all }]
Syntax Description
(Optional) Applies to a virtual routing and forwarding (VRF) instance. |
|
VRF name. The name can be a maximum of 32 alphanumeric characters and is case sensitive. |
|
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information about MSDP mesh groups:
switch(config)# show ip msdp mesh-group
show ip msdp peer
To display information about Multicast Source Discovery Protocol (MSDP) peers, use the show ip msdp peer command.
show ip msdp peer [ peer-address ] [ vrf { vrf-name | all }]
Syntax Description
(Optional) Applies to a virtual routing and forwarding (VRF) instance. |
|
VRF name. The name can be a maximum of 32 alphanumeric characters and is case sensitive. |
|
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information about MSDP peers:
switch(config)# show ip msdp peer
show ip msdp policy statistics sa-policy
To display information about Multicast Source Discovery Protocol (MSDP) Source-Active (SA) policies, use the show ip msdp policy statistics sa-policy command.
show ip msdp policy statistics sa-policy peer-address { in | out } [ vrf { vrf-name }]
Syntax Description
(Optional) Applies to a virtual routing and forwarding (VRF) instance. |
|
VRF name. The name can be a maximum of 32 alphanumeric characters and is case sensitive. |
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information about MSDP SA policies:
switch(config)# show ip msdp policy statistics sa-policy 192.168.1.10 in
show ip msdp route
To display information about the Multicast Source Discovery Protocol (MSDP) Source-Active (SA) cache, use the show ip msdp route command.
show ip msdp route [{ source [ group ]} | { group [ source ]}] [ asn ] [ peer peer ] [ detail ] [ vrf { vrf-name | all }]
Syntax Description
(Optional) Applies to a virtual routing and forwarding (VRF) instance. |
|
VRF name. The name can be a maximum of 32 alphanumeric characters and is case sensitive. |
|
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
The show ip msdp sa-cache command is an alternative form of this command.
Examples
This example shows how to display information about the MSDP SA cache:
switch(config)# show ip msdp route
Related Commands
|
|
|
|---|---|
show ip msdp rpf
To display information about the Multicast Source Discovery Protocol (MSDP) next-hop autonomous system (AS) on the Border Gateway Protocol (BGP) path to a rendezvous point (RP) address, use the show ip msdp rpf command.
show ip msdp rpf rp-address [ vrf { vrf-name all }]
Syntax Description
(Optional) Applies to a virtual routing and forwarding (VRF) instance. |
|
VRF name. The name can be a maximum of 32 alphanumeric characters and is case sensitive. |
|
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information about MSDP reverse path forwarding (RPF) peers:
switch(config)# show ip msdp rpf 192.168.1.10
show ip msdp sa-cache
To display information about the Multicast Source Discovery Protocol (MSDP) Source-Active (SA) cache, use the show ip msdp sa-cache command.
show ip msdp sa-cache [{ source [ group ]} | { group [ source ]}] [ asn ] [ peer peer ] [ detail ] [ vrf { vrf-name | all }]
Syntax Description
(Optional) Applies to a virtual routing and forwarding (VRF) instance. |
|
VRF name. The name can be a maximum of 32 alphanumeric characters and is case sensitive. |
|
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
The show ip msdp route command is an alternative form of this command.
Examples
This example shows how to display information about the MSDP SA cache:
switch(config)# show ip msdp sa-cache
Related Commands
|
|
|
|---|---|
show ip msdp route
To display information about the Multicast Source Discovery Protocol (MSDP) Source-Active (SA) route cache, use the show ip msdp route command.
show ip msdp route [{ source [ group ]} | { group [ source ]}] [ asn ] [ peer peer ] [ detail ] [ vrf { vrf-name | all }]
Syntax Description
(Optional) Applies to a virtual routing and forwarding (VRF) instance. |
|
VRF name. The name can be a maximum of 32 alphanumeric characters and is case sensitive. |
|
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
The show ip msdp route command is an alternative form of this command.
Examples
This example shows how to display information about the MSDP SA cache:
switch(config)# show ip msdp sa-cache
Related Commands
|
|
|
|---|---|
show ip msdp sources
To display information about Multicast Source Discovery Protocol (MSDP) learned sources, use the show ip msdp sources command.
show ip msdp sources [ vrf { vrf-name | all }]
Syntax Description
(Optional) Applies to a virtual routing and forwarding (VRF) instance. |
|
VRF name. The name can be a maximum of 32 alphanumeric characters and is case sensitive. |
|
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information about MSDP learned sources:
switch(config)# show ip msdp sources
show ip msdp summary
To display summary information about Multicast Source Discovery Protocol (MSDP) peers, use the show ip msdp summary command.
show ip msdp summary [ vrf { vrf-name | all }]
Syntax Description
(Optional) Applies to a virtual routing and forwarding (VRF) instance. |
|
VRF name. The name can be a maximum of 32 alphanumeric characters and is case sensitive. |
|
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display summary information about MSDP peers:
switch(config)# show ip msdp summary
show ip netstack mroute
To show IPv4 multicast routes in the Network Stack cache, use the show ip netstack mroute command.
show ip netstack mroute [ vrf vrf-name ]
Syntax Description
(Optional) Specifies the VRF name. The name can be a maximum of 32 alphanumeric characters and is case sensitive. |
Defaults
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display multicast routes in the Network Stack cache:
switch(config)# show ip netstack mroute
(0.0.0.0/0, 225.1.1.1/32)
Software switched packets: 1, bytes: 84
(4.1.1.2/32, 225.1.1.1/32), data-created
Software switched packets: 2, bytes: 168
(0.0.0.0/0, 225.1.1.2/32)
Software switched packets: 0, bytes: 0
(4.1.1.2/32, 225.1.1.2/32), data-created
Software switched packets: 5, bytes: 420
(0.0.0.0/0, 225.1.1.3/32)
Software switched packets: 0, bytes: 0
(4.1.1.2/32, 225.1.1.3/32), data-created
Software switched packets: 2, bytes: 168
(0.0.0.0/0, 225.1.1.4/32)
Software switched packets: 0, bytes: 0
(4.1.1.2/32, 225.1.1.4/32), data-created
Software switched packets: 2, bytes: 168
(0.0.0.0/0, 225.1.1.5/32)
Software switched packets: 0, bytes: 0
(4.1.1.2/32, 225.1.1.5/32), data-created
Software switched packets: 2, bytes: 168
(0.0.0.0/0, 226.1.1.1/32)
Software switched packets: 0, bytes: 0
(0.0.0.0/0, 226.2.2.2/32)
Software switched packets: 0, bytes: 0
(0.0.0.0/0, 232.0.0.0/8)
Software switched packets: 0, bytes: 0
switch(config)#
show ip pim df
To display information about the designated forwarders (DFs) for IPv4 Protocol Independent Multicast (PIM), use the show ip pim df command.
show ip pim df [ rp-or-group ] [ vrf { vrf-name | all }]
Syntax Description
(Optional) Applies to a virtual routing and forwarding (VRF) instance. |
|
VRF name. The name can be a maximum of 32 alphanumeric characters and is case sensitive. |
|
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information about PIM DFs:
switch(config)# show ip pim df
show ip pim event-history
To display information in the IPv4 Protocol Independent Multicast (PIM) event history buffers, use the show ip pim event-history command.
show ip pim event-history { errors | msgs | statistics }
Syntax Description
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information in the IPv4 PIM msgs event history buffer:
switch(config)# show ip pim event-history msgs
Related Commands
|
|
|
|---|---|
show ip pim group-range
To display information about the group ranges for IPv4 Protocol Independent Multicast (PIM), use the show ip pim group-range command.
show ip pim group-range [ group ] [ vrf { vrf-name | all | default | management }]
Syntax Description
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information about IPv4 PIM group ranges:
switch(config)# show ip pim group-range
show ip pim interface
To display information about the enabled interfaces for IPv4 Protocol Independent Multicast (PIM), use the show ip pim interface command.
show ip pim interface [ brief ] [ vrf { vrf-name | all | default | management }]
show ip pim interface ethernet { slot / port | port-channel channel-number [. sub_if-number ] | vethernet veth-id | vlan vlan-id }
Syntax Description
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Information on Bidirectional Forwarding Detection (BFD) was added. |
Usage Guidelines
Examples
This example shows how to display brief information about IPv4 PIM-enabled interfaces:
switch# show ip pim interface brief
This example shows how to display information about PIM-enabled interfaces:
show ip pim neighbor
To display information about IPv4 Protocol Independent Multicast (PIM) neighbors, use the show ip pim neighbor command.
show ip pim neighbor {[ ethernet slot / port | port-channel channel-number [. sub_if-number ] | vethernet veth-id | vlan vlan-id ] | [ neighbor-addr ]} [ vrf { vrf-name | all | default | management }]
Syntax Description
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Information on Bidirectional Forwarding Detection (BFD) was added. |
Usage Guidelines
Examples
This example shows how to display information about PIM neighbors:
switch(config)# show ip pim neighbor
show ip pim oif-list
To display information about IPv4 Protocol Independent Multicast (PIM) interfaces for a group, use the show ip pim oif-list command.
show ip pim oif-list group [ source ] [ vrf { vrf-name | all | default | management }]
Syntax Description
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display IPv4 PIM interfaces for a group:
switch(config)# show ip pim oif-list 232.0.0.0
show ip pim policy statistics auto-rp
To display information about the Auto-RP policy statistics for IPv4 Protocol Independent Multicast (PIM), use the show ip pim policy statistics auto-rp command.
show ip pim policy statistics auto-rp { rp-candidate-policy | mapping-agent-policy } [ vrf { vrf-name | all | default | management }]
Syntax Description
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information about IPv4 PIM policy statistics:
switch(config)# show ip pim policy statistics auto-rp rp-candidate-policy
show ip pim policy statistics bsr
To display information about the bootstrap router (BSR) policy statistics for IPv4 Protocol Independent multicast (PIM), use the show ip pim policy statistics bsr command.
show ip pim policy statistics bsr { bsr-policy | rp-candidate-policy } [ vrf { vrf-name | all | default | management }]
Syntax Description
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information about IPv4 PIM policy statistics:
switch(config)# show ip pim policy statistics bsr bsr-policy
show ip pim policy statistics jp-policy
To display information about the join-prune policy statistics for IPv4 Protocol Independent Multicast (PIM), use the show ip pim policy statistics jp-policy command.
show ip pim policy statistics jp-policy { ethernet slot / port | port-channel channel-number [. sub_if-number ] | vethernet veth-id | vlan vlan-id }
Syntax Description
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information about PIM policy statistics:
switch(config)# show ip pim policy statistics jp-policy ethernet 2/12
show ip pim policy statistics neighbor-policy
To display information about the neighbor policy statistics for IPv4 Protocol Independent Multicast (PIM), use the show ip pim policy statistics neighbor-policy command.
show ip pim policy statistics neighbor-policy { ethernet slot / port | port-channel channel-number [. sub_if-number ] | vethernet veth-id | vlan vlan-id }
Syntax Description
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information about IPv4 PIM policy statistics:
switch(config)# show ip pim policy statistics neighbor-policy ethernet 2/12
show ip pim policy statistics register-policy
To display information about the register policy statistics for IPv4 Protocol Independent Multicast (PIM), use the show ip pim policy statistics register-policy command.
show ip pim policy statistics register-policy [ vrf { vrf-name | all | default | management }]
Syntax Description
(Optional) Applies to a virtual routing and forwarding (VRF) instance. |
|
VRF name. The name can be a maximum of 32 alphanumeric characters and is case sensitive. |
|
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information about PIM policy statistics:
switch(config)# show ip pim policy statistics register-policy vrf all
show ip pim route
To display information about the routes for IPv4 Protocol Independent Multicast (PIM), use the show ip pim route command.
show ip pim route { source group | group [ source ]} [ vrf { vrf-name | all | default | management }]
Syntax Description
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display IPv4 PIM routes:
switch(config)# show ip pim route 232.0.0.0
show ip pim rp
To display information about the rendezvous points (RPs) for IPv4 Protocol Independent Multicast (PIM), use the show ip pim rp command.
show ip pim rp [ group ] [ vrf { vrf-name | all | default | management }]
Syntax Description
(Optional) Applies to a virtual routing and forwarding (VRF) instance. |
|
VRF name. The name can be a maximum of 32 alphanumeric characters and is case sensitive. |
|
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information about IPv4 PIM RPs:
switch(config)# show ip pim rp
show ip pim rp-hash
To display information about the RP-hash values for IPv4 Protocol Independent Multicast (PIM), use the show ip pim rp-hash command.
show ip pim rp-hash group [ vrf { vrf-name | all | default | management }]
Syntax Description
(Optional) Applies to a virtual routing and forwarding (VRF) instance. |
|
VRF name. The name can be a maximum of 32 alphanumeric characters and is case sensitive. |
|
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information about IPv4 PIM RP-hash values:
switch(config)# show ip pim rp-hash 224.1.1.1
show ip pim statistics
To display information about the packet counter statistics for IPv4 Protocol Independent Multicast (PIM), use the show ip pim statistics command.
show ip pim statistics [ vrf { vrf-name | all | default | management }]
Syntax Description
(Optional) Applies to a virtual routing and forwarding (VRF) instance. |
|
VRF name. The name can be a maximum of 32 alphanumeric characters and is case sensitive. |
|
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Changed output to include vPC information when PIM is in vPC mode. |
Usage Guidelines
Examples
This example shows how to display information about IPv4 PIM statistics (if PIM is not in vPC mode, the vPC statistics are not displayed):
switch(config)# show ip pim statistics
show ip pim vrf
To display information about IPv4 Protocol Independent Multicast (PIM) by virtual routing and forwarding (VRF) instance, use the show ip pim vrf command.
show ip pim vrf [ vrf-name | all | default | detail | management ]
Syntax Description
(Optional) VRF name. The name can be a maximum of 32 alphanumeric characters and is case sensitive. |
|
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Information on Bidirectional Forwarding Detection (BFD) was added. |
Usage Guidelines
Examples
This example shows how to display information about IPv4 PIM by VRF:
switch(config)# show ip pim vrf
This example shows how to display the detailed information about IPv4 PIM by VRF:
show ip static-route
To display static routes from the unicast Routing Information Base (RIB), use the show ip static-route command.
show ip static-route [ vrf { vrf-name | all | default | management }]
Syntax Description
(Optional) Specifies the virtual routing and forwarding (VRF) context name. The name can be any case-sensitive, alphanumeric string up to 32 characters. |
|
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display the static routes:
Related Commands
|
|
|
|---|---|
show ipv6 mld groups
To display information about the Multicast Listener Discovery (MLD) attached-group membership, use the show ipv6 mld groups command.
show ipv6 [ icmp ] mld groups [{ source [ group ]} | { group [ source ]}] [ if-type if-number ] [ vrf { vrf-name | all }]
Syntax Description
Defaults
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information about the MLD group membership:
switch(config)# show ipv6 mld groups
show ipv6 mld local-groups
To display information about the local group membership for Multicast Listener Discovery (MLD), use the show ipv6 mld local-groups command.
show ipv6 [ icmp ] mld local-groups [ if-type if-number ] [ vrf { vrf-name | all }]
Syntax Description
Defaults
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information about MLD local groups:
switch(config)# show ipv6 mld local-groups
show ipv6 mroute
To display information about IPv6 multicast routes, use the show ipv6 mroute command.
show ipv6 mroute { group | { source group } | { group [ source ]}} [ summary [ software-forwarded ]] [ vrf { vrf-name | all }]
Syntax Description
(Optional) Applies to a virtual routing and forwarding (VRF) instance. |
|
VRF name. The name can be a maximum of 32 alphanumeric characters and is case sensitive. |
|
Defaults
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information about multicast routes:
switch(config)# show ipv6 mroute
Related Commands
|
|
|
|---|---|
show ipv6 mroute summary
To display summary information about IPv6 multicast routes, use the show ipv6 mroute summary command.
show ipv6 mroute summary [ count | software-forwarded ]] [ vrf { vrf-name | all }]
show ipv6 mroute { group ] summary [ software-forwarded ] [ vrf { vrf-name | all }]
Syntax Description
(Optional) Applies to a virtual routing and forwarding (VRF) instance. |
|
VRF name. The name can be a maximum of 32 alphanumeric characters and is case sensitive. |
|
Defaults
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display summary information about multicast routes:
switch(config)# show ipv6 mroute summary
Related Commands
|
|
|
|---|---|
show ipv6 pim df
To display information about the designated forwarders (DFs) for IPv6 Protocol Independent Multicast (PIM6), use the show ipv6 pim df command.
show ipv6 pim df [ rp-or-group ] [ vrf { vrf-name | all }]
Syntax Description
(Optional) Applies to a virtual routing and forwarding (VRF) instance. |
|
VRF name. The name can be a maximum of 32 alphanumeric characters and is case sensitive. |
|
Defaults
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information about PIM6 DFs:
switch(config)# show ipv6 pim df
show ipv6 pim event-history
To display information in the IPv6 Protocol Independent Multicast (PIM6) event history buffers, use the show ipv6 pim event-history command.
show ipv6 pim event-history { errors | msgs | statistics }
Syntax Description
Defaults
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information in the PIM6 msgs event history buffer:
switch(config)# show ipv6 pim event-history msgs
Related Commands
|
|
|
|---|---|
show ipv6 pim group-range
To display information about IPv6 Protocol Independent Multicast (PIM6) group ranges, use the show ipv6 pim group-range command.
show ipv6 pim group-range [ group ] [ vrf { vrf-name | all }]
Syntax Description
(Optional) Applies to a virtual routing and forwarding (VRF) instance. |
|
VRF name. The name can be a maximum of 32 alphanumeric characters and is case sensitive. |
|
Defaults
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information about PIM6 group ranges:
switch(config)# show ipv6 pim group-range
show ipv6 pim interface
To display information about the enabled interfaces for IPv6 Protocol Independent Multicast (PIM6), use the show ipv6 pim interface command.
show ipv6 pim interface [ brief ] [ vrf { vrf-name | all }]
show ipv6 pim interface if-type if-number
Syntax Description
Defaults
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information about PIM6-enabled interfaces:
switch(config)# show ipv6 pim interface
show ipv6 pim neighbor
To display information about IPv6 Protocol Independent Multicast (PIM6) neighbors, use the show ipv6 pim neighbor command.
show ipv6 pim neighbor {[ if-type if-number ] | [ neighbor-addr ]} [ vrf { vrf-name | all }]
Syntax Description
Defaults
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information about PIM6 neighbors:
switch(config)# show ipv6 pim neighbor
show ipv6 pim oif-list
To display information about IPv6 Protocol Independent Multicast (PIM6) interfaces for a group, use the show ipv6 pim oif-list command.
show ipv6 pim oif-list group [ source ] [ vrf { vrf-name | all }]
Syntax Description
(Optional) Applies to a virtual routing and forwarding (VRF) instance. |
|
VRF name. The name can be a maximum of 32 alphanumeric characters and is case sensitive. |
|
Defaults
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display PIM6 interfaces for a group:
switch(config)# show ipv6 pim oif-list ff1e::0002
show ipv6 pim policy statistics jp-policy
To display information about the join-prune policy statistics for IPv6 Protocol Independent Multicast (PIM6), use the show ipv6 pim policy statistics j-policy command.
show ipv6 pim policy statistics jp-policy if-type if-number
Syntax Description
Defaults
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information about PIM6 policy statistics:
switch(config)# show ipv6 pim policy statistics jp-policy ethernet 2/2
C: No. of comparisions, M: No. of matches
route-map rmap1 permit 10
match ipv6 multicast group ff1e::/128 C: 0 M: 0
Total accept count for policy: 2
Total reject count for policy: 0
switch(config)#
show ipv6 pim policy statistics neighbor-policy
To display information about the neighbor policy statistics for IPv6 Protocol Independent Multicast (PIM6), use the show ipv6 pim policy statistics neighbor-policy command.
show ipv6 pim policy statistics neighbor-policy if-type if-number
Syntax Description
Defaults
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information about PIM6 policy statistics:
switch(config)# show ipv6 pim policy statistics neighbor-policy ethernet 2/2
C: No. of comparisions, M: No. of matches
route-map rmap2 permit 10
match ipv6 multicast group ff1e::/128 C: 0 M: 0
Total accept count for policy: 2
Total reject count for policy: 0
switch(config)#
show ipv6 pim route
To display information about IPv6 Protocol Independent Multicast (PIM6) routes, use the show ipv6 pim route command.
show ipv6 pim route { source group | group [ source ]} [ vrf { vrf-name | all }]
Syntax Description
(Optional) Applies to a virtual routing and forwarding (VRF) instance. |
|
VRF name. The name can be a maximum of 32 alphanumeric characters and is case sensitive. |
|
Defaults
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display PIM6 routes:
switch(config)# show ipv6 pim route
show ipv6 pim rp
To display information about IPv6 Protocol Independent Multicast (PIM) RPs, use the show ipv6 pim rp command.
show ipv6 pim rp [ group ] [ vrf { vrf-name | all }]
Syntax Description
(Optional) Applies to a virtual routing and forwarding (VRF) instance. |
|
VRF name. The name can be a maximum of 32 alphanumeric characters and is case sensitive. |
|
Defaults
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information about PIM6 RPs:
switch(config)# show ipv6 pim rp
show ipv6 pim rp-hash
To display information about the RP-hash values for IPv6 Protocol Independent Multicast (PIM6), use the show ipv6 pim rp-hash command.
show ipv6 pim rp-hash group [ vrf { vrf-name | all }]
Syntax Description
(Optional) Applies to a virtual routing and forwarding (VRF) instance. |
|
VRF name. The name can be a maximum of 32 alphanumeric characters and is case sensitive. |
|
Defaults
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information about PIM6 RP-hash values:
switch(config)# show ipv6 pim rp-hash
show ipv6 pim statistics
To display information about the packet counter statistics for IPv6 Protocol Independent Multicast (PIM6), use the show ipv6 pim statistics command.
show ipv6 pim statistics [ vrf { vrf-name | all }]
Syntax Description
(Optional) Applies to a virtual routing and forwarding (VRF) instance. |
|
VRF name. The name can be a maximum of 32 alphanumeric characters and is case sensitive. |
|
Defaults
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information about PIM6 statistics:
switch(config)# show ipv6 pim statistics
show ipv6 pim vrf
To display information about IPv6 Protocol Independent Multicast (PIM6) by virtual routing and forwarding (VRF) instance, use the show ipv6 pim vrf command.
show ipv6 pim vrf [ vrf-name | all ]
Syntax Description
(Optional) VRF name. The name can be a maximum of 32 alphanumeric characters and is case sensitive. |
|
Defaults
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information about PIM6 by VRF:
switch(config)# show ipv6 pim vrf
show routing ip multicast event-history
To display information in the IPv4 Multicast Routing Information Base (MRIB) event history buffers, use the show routing ip multicast event-history command.
show routing ip multicast event-history { cli | errors | mfdm-debugs | mfdm-stats | msgs | rib | statistics | vrf }
Syntax Description
Displays the event history buffer of type multicast FIB distribution (MFDM). |
|
Displays the event history buffer of type virtual routing and forwarding (VRF). |
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information in the MRIB msgs event history buffer:
Related Commands
|
|
|
|---|---|
show hardware proxy layer-3 detail
To display detail proxy Layer 3 forwarding information, use the show hardware proxy layer-3 detail command.
show hardware proxy layer-3 detail
Syntax Description
Defaults
Command Modes
Command History
|
|
|
|---|---|
Usage Guidelines
This command does not require a license.
This command applies only to Cisco Nexus 7000 Series chassis that contain an F1 Series module or an M1 Series module. This command applies when you are running either FabricPath or Ethernet interfaces.
Examples
This example shows how to display detail proxy Layer 3 forwarding information:
switch# show hardware proxy layer-3 detail
Related Commands
|
|
|
|---|---|
Displays detailed information on the proxy Layer 3 functionality. |
show routing ipv6 multicast
To display information about IPv6 multicast routes, use the show routing ipv6 multicast command.
show routing ipv6 multicast [ vrf { vrf-name | all }] {{ source group } | { group [ source ]}}
Syntax Description
(Optional) Applies to a virtual routing and forwarding (VRF) instance. |
|
VRF name. The name can be a maximum of 32 alphanumeric characters and is case sensitive. |
|
Defaults
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information about IPv6 multicast routes:
switch(config)# show routing ipv6 multicast
show routing ipv6 multicast clients
To display information about IPv6 multicast routing clients, use the show routing ipv6 multicast clients command.
show routing ipv6 multicast clients [ client-name ]
Syntax Description
(Optional) One of the following multicast routing client names: |
Defaults
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information about IPv6 multicast routing clients:
switch(config)# show routing ipv6 multicast clients icmpv6
show routing ipv6 multicast event-history
To display information in the IPv6 Multicast Routing Information Base (M6RIB) event history buffers, use the show routing ipv6 multicast event-history command.
show routing ipv6 multicast event-history { cli | errors | mfdm | mfdm-stats | msgs | rib | statistics | vrf }
Syntax Description
Displays the event history buffer of type multicast FIB distribution (MFDM). |
|
Displays the event history buffer of type virtual routing and forwarding (VRF). |
Defaults
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information in the M6RIB msgs event history buffer:
Related Commands
|
|
|
|---|---|
Configures the size of the IPv6 M6RIB event history buffers. |
|
show routing multicast
To display information about IPv4 multicast routes, use the show routing multicast command.
show routing [ ip | ipv4 ] multicast [ vrf { vrf-name | all | default | management }]
{{ source group } | { group [ source ]}}
Syntax Description
(Optional) Applies to a virtual routing and forwarding (VRF) instance. |
|
VRF name. The name can be a maximum of 32 alphanumeric characters and is case sensitive. |
|
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information about IPv4 multicast routes:
switch(config)# show routing multicast
show routing multicast clients
To display information about IPv4 multicast routing clients, use the show routing multicast clients command.
show routing [ ip | ipv4 ] multicast clients [ client-name ]
Syntax Description
(Optional) One of the following multicast routing client names: |
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information about IPv4 multicast clients:
switch(config)# show routing multicast clients pim
show running-config igmp
To display information about the running-system configuration for IGMP, use the show running-config igmp command.
show running-config igmp [ all ]
Syntax Description
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information about the IGMP running-system configuration:
switch(config)# show running-config igmp
show running-config msdp
To display information about the running-system configuration for Multicast Source Discovery Protocol (MSDP), use the show running-config msdp command.
show running-config msdp [ all ]
Syntax Description
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information about the MSDP running-system configuration:
switch(config)# show running-config msdp
show running-config pim
To display information about the running-system configuration for IPv4 Protocol Independent Multicast (PIM), use the show running-config pim command.
show running-config pim [ all ]
Syntax Description
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information about the IPv4 PIM running-system configuration:
switch(config)# show running-config pim
show running-config pim6
To display information about the running-system configuration for IPv6 Protocol Independent Multicast (PIM6), use the show running-config pim6 command.
show running-config pim6 [ all ]
Syntax Description
Defaults
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information about the PIM6 running-system configuration:
switch(config)# show running-config pim6
show startup-config igmp
To display information about the startup-system configuration for IGMP, use the show startup-config igmp command.
show startup-config igmp [ all ]
Syntax Description
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information about the IGMP startup-system configuration:
switch(config)# show startup-config igmp
show startup-config msdp
To display information about the startup-system configuration for Multicast Source Discovery Protocol (MSDP), use the show startup-config msdp command.
show startup-config msdp [ all ]
Syntax Description
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information about the startup-system configuration for MSDP:
switch(config)# show startup-config msdp
show startup-config pim
To display information about the startup-system configuration for IPv4 Protocol Independent Multicast (PIM), use the show startup-config pim command.
show startup-config pim [ all ]
Syntax Description
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information about the startup-system configuration for IPv4 PIM:
switch(config)# show startup-config pim
show startup-config pim6
To display information about the startup-system configuration for IPv6 Protocol Independent Multicast (PIM6), use the show startup-config pim6 command.
show startup-config pim6 [ all ]
Syntax Description
Defaults
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to display information about the startup-system configuration for PIM6:
switch(config)# show startup-config pim6
Feedback