H Commands
This chapter describes the Cisco NX-OS PIM commands that begin with H.
hardware profile multicast max-limit
To set the maximum number of entries in the multicast routing table, use the hardware profile multicast max-limit command.
hardware profile multicast max-limit max-entries
Syntax Description
Maximum number of entries in the multicast routing table. The range is from 0 to 16000. |
Command Default
Command Modes
network-admin
network-operator
vdc-admin
vdc-operator
Command History
|
|
Examples
This example shows how to set the maximum number of entries in the multicast routing table to 3000:
Related Commands
|
|
---|---|
Displays information about the multicast routing table limits. |