Cisco Nexus 9000 Series NX-OS Command Reference (Configuration Commands), Release 7.0(3)I6(1)

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents
Find Matches in This Book

Results

Updated:
June 7, 2017

Chapter: Q Commands

Q Commands

qos copy policy-map type network-qos prefix

qos copy policy-map type network-qos <pmap-nq-enum-name-dc3> { prefix | suffix } <ix-name>

Syntax Description

Syntax Description

copy

Copy (Clone) template

policy-map

Configure a policy map

type

Specify the type of this policy-map

network-qos

Network QoS policy

pmap-nq-enum-name-dc3

prefix

Policy map name prefix

suffix

Policy map name suffix

ix-name

Suffix/Prefix name, max size counted together with policy name
Command Mode
  • /exec

qos copy policy-map type queuing prefix

qos copy policy-map type queuing <pmap-name-que-temp> { prefix | suffix } <ix-name>

Syntax Description

Syntax Description

copy

Copy (Clone) template

policy-map

Configure a policy map

type

Specify the type of this policy-map

queuing

Queuing policy

pmap-name-que-temp

Policy-map name

prefix

Policy map name prefix

suffix

Policy map name suffix

ix-name

Suffix/Prefix name, max size counted together with policy name
Command Mode
  • /exec

qos qos-policies statistics

[no] qos qos-policies statistics

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

qos-policies

All qos type policies

statistics

statistics
Command Mode
  • /exec/configure

qos shared-policer

{ qos shared-policer [ type qos ] <policer-name> { [ cir ] { <cir-val> [ bps | kbps | mbps | gbps | pps ] | percent <cir-perc> } [ [ bc ] { <committed-burst> [ bytes | kbytes | mbytes | ms | us | packets ] } ] [ pir { <pir-val> [ bps2 | kbps2 | mbps2 | gbps2 | pps2 ] | percent <pir-perc> } [ [ be ] { <extended-burst> [ bytes2 | kbytes2 | mbytes2 | ms2 | us2 | packets2 ] } ] ] [ conform { transmit | set-prec-transmit { <prec-val> | <prec-enum> } | set-dscp-transmit { <dscp-val> | <dscp-enum> } | set-cos-transmit <cos-val> | set-discard-class-transmit <disc-class-val> | set-qos-transmit <qos-grp-val> | set-mpls-exp-imposition-transmit <exp-value-imp> | set-mpls-exp-topmost-transmit <exp-value-top> } [ exceed { transmit1 | drop1 | set <exc-frm-field> <exc-to-field> table cir-markdown-map | set-prec-transmit1 { <prec-val1> | <prec-enum1> } | set-dscp-transmit1 { <dscp-val1> | <dscp-enum1> } | set-cos-transmit1 <cos-val1> | set-discard-class-transmit1 <disc-class-val1> | set-qos-transmit1 <qos-grp-val1> | set-mpls-exp-imposition-transmit1 <exp-value-imp1> | set-mpls-exp-topmost-transmit1 <exp-value-top1> } ] [ violate { drop2 | set <vio-frm-field> <vio-to-field> table2 pir-markdown-map | set-prec-transmit2 { <prec-val2> | <prec-enum2> } | set-dscp-transmit2 { <dscp-val2> | <dscp-enum2> } | set-cos-transmit2 <cos-val2> | set-discard-class-transmit2 <disc-class-val2> | set-qos-transmit2 <qos-grp-val2> | set-mpls-exp-imposition-transmit2 <exp-value-imp2> | set-mpls-exp-topmost-transmit2 <exp-value-top2> } ] ] } | no qos shared-policer [ type qos ] <policer-name> }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

shared-policer

Shared policer

policer-name

Shared policer name

type

(Optional) Specify the type of shared-policer

qos

QoS Global Commands

cir

(Optional) Specify committed information rate

bc

(Optional) Specify committed burst

percent

Specify rate as percentage of interface data-rate

cir-perc

Percentage

pir-perc

(Optional) Percentage

pir

(Optional) Specify peak information rate

be

(Optional) Specify extended burst (for 1R3C meter)

bps

(Optional) Bits per second

kbps

(Optional) Kilo bits per second

mbps

(Optional) Mega bits per second

gbps

(Optional) Giga bits per second

pps

(Optional) Packets per second

bps2

(Optional) Bits per second

kbps2

(Optional) Kilo Bits per second

mbps2

(Optional) Mega Bits per second

gbps2

(Optional) Giga Bits per second

pps2

(Optional) Packets per second

bytes

(Optional) Bytes

kbytes

(Optional) Kilo bytes

mbytes

(Optional) Mega bytes

us

(Optional) Micro second(s)

ms

(Optional) Milli second(s)

packets

(Optional) Packets

bytes2

(Optional) Bytes

kbytes2

(Optional) Kilo Bytes

mbytes2

(Optional) Mega Bytes

ms2

(Optional) Milli seconds

us2

(Optional) Micro seconds

packets2

(Optional) Packets

conform

(Optional) Specify a conform action

exceed

(Optional) Specify a exceed action

violate

(Optional) Specify a violate action

transmit

(Optional) Transmit packet

transmit1

(Optional) Transmit packet

drop1

(Optional) Drop packet

drop2

(Optional) Drop packet

set-prec-transmit

(Optional) Set precedence and send it

set-prec-transmit1

(Optional) Set precedence and send it

set-prec-transmit2

(Optional) Set precedence and send it

prec-val

(Optional) Precedence value

prec-val1

(Optional) Precedence value

prec-val2

(Optional) Precedence value

prec-enum

(Optional)

prec-enum1

(Optional)

prec-enum2

(Optional)

set-dscp-transmit

(Optional) Set dscp and send it

set-dscp-transmit1

(Optional) Set dscp and send it

set-dscp-transmit2

(Optional) Set dscp and send it

dscp-val

(Optional) DSCP value

dscp-val1

(Optional) DSCP value

dscp-val2

(Optional) DSCP value

dscp-enum

(Optional)

dscp-enum1

(Optional)

dscp-enum2

(Optional)

set-cos-transmit

(Optional) Set cos and send it

set-cos-transmit1

(Optional) Set cos and send it

set-cos-transmit2

(Optional) Set cos and send it

cos-val

(Optional) new cos value

cos-val1

(Optional) new cos value

cos-val2

(Optional) new cos value

set-discard-class-transmit

(Optional) Set discard class and send it

set-discard-class-transmit1

(Optional) Set discard class and send it

set-discard-class-transmit2

(Optional) Set discard class and send it

disc-class-val

(Optional) new discard-class value

disc-class-val1

(Optional) new discard-class value

disc-class-val2

(Optional) new discard-class value

set-qos-transmit

(Optional) Set qos-group and send it

set-qos-transmit1

(Optional) Set qos-group and send it

set-qos-transmit2

(Optional) Set qos-group and send it

qos-grp-val

(Optional) QoS group value

qos-grp-val1

(Optional) QoS group value

qos-grp-val2

(Optional) QoS group value

set-mpls-exp-imposition-transmit

(Optional) set-mpls-exp-imposition-transmit

set-mpls-exp-imposition-transmit1

(Optional) set-mpls-exp-imposition-transmit

set-mpls-exp-imposition-transmit2

(Optional) set-mpls-exp-imposition-transmit

exp-value-imp

(Optional) MPLS imposition value

exp-value-imp1

(Optional) MPLS imposition value

exp-value-imp2

(Optional) MPLS imposition value

set-mpls-exp-topmost-transmit

(Optional) Set MPLS topmost label

set-mpls-exp-topmost-transmit1

(Optional) Set MPLS topmost label

set-mpls-exp-topmost-transmit2

(Optional) Set MPLS topmost label

exp-value-top

(Optional) MPLS topmost value

exp-value-top1

(Optional) MPLS topmost value

exp-value-top2

(Optional) MPLS topmost value

set

(Optional) Set a particular value using table or markdown map

exc-frm-field

(Optional)

exc-to-field

(Optional)

vio-frm-field

(Optional)

vio-to-field

(Optional)

table

(Optional) Set using the table-map

table2

(Optional) Set using the table-map

cir-markdown-map

(Optional) Markdown map table name for exceed action

pir-markdown-map

(Optional) Markdown map table name for violate action
Command Mode
  • /exec/configure

qos statistics

[no] qos statistics

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

statistics

statistics
Command Mode
  • /exec/configure

qualify udf

[no] <udf_tcam_type> qualify udf { <udf_name> } +

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

udf_tcam_type

Region type

qualify

Configure UDFs to be qualified for span region

udf

Configure UDF names

udf_name

UDF name
Command Mode
  • /exec/configure/tcam-templ

queue-limit

[no] queue-limit [ cos <cos-val> ] { <q-size> [ packets | bytes | kbytes | mbytes | ms | us ] | percent <perc-q-size> | dynamic <alpha> }

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

queue-limit

Configure queue size for the class

cos

(Optional) IEEE 802.1Q Class of Service

cos-val

(Optional) 802.1Q Class of Service value

percent

Specify queue size in Percentage

perc-q-size

Queue size in percentage of total tx/rx buffer size

dynamic

Queue size in dynamic alpha factor

alpha

0-1/128, 1-1/64, 2-1/32, 3-1/16, 4-1/8, 5-1/4, 6-1/2, 7-1, 8-2, 9-4, 10-8

packets

(Optional) Packets

bytes

(Optional) Bytes

kbytes

(Optional) Kilo bytes

mbytes

(Optional) Mega bytes

ms

(Optional) Milli second(s)

us

(Optional) Micro second(s)
Command Mode
  • /exec/configure/policy-map/type/queuing/class

queue-limit2

[no] queue-limit2 [ cos2 <cos-val> ] { <q-size> [ packets | bytes | kbytes | mbytes | ms | us ] | percent2 <perc-q-size> | dynamic2 <alpha> }

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

queue-limit2

Configure queue size for the class

cos2

(Optional) IEEE 802.1Q Class of Service

cos-val

(Optional) 802.1Q Class of Service value

percent2

Specify queue size in Percentage

perc-q-size

Queue size in percentage of total tx/rx buffer size

dynamic2

Queue size in dynamic alpha factor

alpha

0-1/128, 1-1/64, 2-1/32, 3-1/16, 4-1/8, 5-1/4, 6-1/2, 7-1, 8-2, 9-4, 10-8

packets

(Optional) Packets

bytes

(Optional) Bytes

kbytes

(Optional) Kilo bytes

mbytes

(Optional) Mega bytes

ms

(Optional) Milli second(s)

us

(Optional) Micro second(s)
Command Mode
  • /exec/configure/policy-map/type/queuing/class

queue-limit3

[no] queue-limit3 [ cos3 <cos-val> ] { <q-size> [ packets | bytes | kbytes | mbytes | ms | us ] | percent3 <perc-q-size> | dynamic3 <alpha> }

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

queue-limit3

Configure queue size for the class

cos3

(Optional) IEEE 802.1Q Class of Service

cos-val

(Optional) 802.1Q Class of Service value

percent3

Specify queue size in Percentage

perc-q-size

Queue size in percentage of total tx/rx buffer size

dynamic3

Queue size in dynamic alpha factor

alpha

0-1/8, 1-1/4, 2-1/2, 3-3/4, 4-9/8, 5-15/8, 6-3, 7-5, 8-8, 9-14, 10-18

packets

(Optional) Packets

bytes

(Optional) Bytes

kbytes

(Optional) Kilo bytes

mbytes

(Optional) Mega bytes

ms

(Optional) Milli second(s)

us

(Optional) Micro second(s)
Command Mode
  • /exec/configure/policy-map/type/queuing/class

Was this Document Helpful?

FeedbackFeedback

Contact Cisco