Cisco Nexus 9000 Series NX-OS Command Reference (Configuration Commands), Release 7.0(3)I6(1)

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents
Find Matches in This Book

Results

Updated:
June 7, 2017

Chapter: I Commands

I Commands

icmp-echo

[no] icmp-echo { <hostname> | <ip-address> | <ipv6-address> } { [ source-ip { <source-ip-hostname> | <source-ip-address> | <source-ipv6-address> } ] | [ source-interface <if_index> ] }

Syntax Description

Syntax Description

no

(Optional)

source-ip

(Optional) source-interface

icmp-echo

ICMP Echo Operation

hostname

Destination hostname, broadcast disallowed

ip-address

Destination IP address, broadcast disallowed

source-interface

(Optional) Source Interface (ingress icmp packet interface)

if_index

(Optional) Source Interface

source-ip-hostname

(Optional) source IP hostname, broadcast disallowed

source-ip-address

(Optional) source IP address, broadcast disallowed
Command Mode
  • /exec/configure/ip-sla

icmpv6 cache disable

[no] icmpv6 cache disable

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

icmpv6

ICMPv6 Commands

cache

Disable cache

disable

Disable cache
Command Mode
  • /exec/configure

icmpv6 cfs-queue

{ icmpv6 cfs-queue <size> } | { no icmpv6 cfs-queue }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

icmpv6

ICMPv6 Commands

cfs-queue

cfs-queue

size

Size for adjacencies to be sent in CFSoE payload
Command Mode
  • /exec/configure

icmpv6 library mts-queue

{ icmpv6 library mts-queue <size> } | { no icmpv6 library mts-queue }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

icmpv6

ICMPv6 Commands

library

library data queue

mts-queue

mts-queue

size

Size for icmpv6 data sap qlimit
Command Mode
  • /exec/configure

icmpv6 mts-queue

{ icmpv6 mts-queue <size> } | { no icmpv6 mts-queue }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

icmpv6

ICMPv6 Commands

mts-queue

mts-queue

size

Size for icmpv6 data sap qlimit
Command Mode
  • /exec/configure

import

import

Syntax Description

Syntax Description

import

import
Command Mode
  • /exec/configure

import interface

import interface <if0>

Syntax Description

Syntax Description

import

import

interface

Interface configuration

if0

interface type and number in module/slot format
Command Mode
  • /exec/configure

import map

[no] import map <rmap-name>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

import

VRF import

map

Route-map based VRF import

rmap-name

Route-map name
Command Mode
  • /exec/configure/vrf-af-ipv4 /exec/configure/vrf-af-ipv6

import running-config

import running-config [ exclude interface ethernet ]

Syntax Description

Syntax Description

import

import

running-config

running-config

exclude

(Optional) Exclude

interface

(Optional) Exclude all interfaces of this type

ethernet

(Optional) running-config excluding physical interfaces
Command Mode
  • /exec/configure

import vrf default map

import vrf default [ <prefix-limit> ] map <rmap-name> | no import vrf default [ <prefix-limit> ] map <rmap-name>

Syntax Description

Syntax Description

no

Negate a command or set its defaults

import

VRF import

vrf

Virtual Router Context

default

VRF name (default)

prefix-limit

(Optional) Maximum prefix limit

map

Route-map based VRF import

rmap-name

Route-map name
Command Mode
  • /exec/configure/vrf-af-ipv4 /exec/configure/vrf-af-ipv6

in-label allocate

[no] in-label <static-inlabel> allocate [ policy { <prefix> <mask> | <prefix-mask> } ]

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

in-label

Configure local label assignment and forwarding for the LSP

allocate

Allocate this label

policy

(Optional) Allocate policy-based IP prefix

static-inlabel

Label Value

prefix

(Optional) Destination prefix

mask

(Optional) Destination prefix mask

prefix-mask

(Optional) Destination prefix/mask
Command Mode
  • /exec/configure/mpls_static/ipv4/lsp

in-order-guarantee

[no] in-order-guarantee

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

in-order-guarantee

Enable IOD
Command Mode
  • /exec/configure/policy-map/type/uf/class

include profile

[no] include profile { <all_conf_profile_name> }

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

include

Include a port-profile

profile

config-profile

all_conf_profile_name

Enter the name of the profile
Command Mode
  • /exec/configure

include profile any

[no] include profile any

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

include

Include a port-profile

profile

config-profile

any

dynamically include profile during apply
Command Mode
  • /exec/configure

index next

{ { index <index> { next-address [ loose | strict ] <ipaddr> | exclude-address <ipaddr> } } | { no index <index> } }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

index

Specify the next entry index to add, edit (or delete)

index

Previous index number

next-address

Specify the next address in the path

loose

(Optional) Target address is loose

strict

(Optional) Target address is strict

exclude-address

Exclude an address from subsequent partial path segments

ipaddr

Enter IP address (A.B.C.D)
Command Mode
  • /exec/configure/te/expl-path

ingress-replication

ingress-replication <addr>

Syntax Description

Syntax Description

ingress-replication

Configure ingress replication

addr

Remote Peer IP Address
Command Mode
  • /exec/configure/if-nve/vni

ingress-replication protocol bgp

[no] ingress-replication protocol bgp

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

ingress-replication

Configure ingress replication

protocol

Control protocol to use

bgp

Border Gateway Protocol
Command Mode
  • /exec/configure/if-nve/vni

ingress-replication protocol static

[no] ingress-replication protocol static

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

ingress-replication

Configure ingress replication

protocol

Control protocol to use

static

Static End-point Configuration
Command Mode
  • /exec/configure/if-nve/vni

ingress

{ ingress <ifh> | no ingress }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

ingress

Ingress interface to determine enhanced forwarding enabled

ifh

Name of the interface for ngoam on which fabric forwarding is configured
Command Mode
  • /exec/configure/configngoamprofile

ingress interface

[no] ingress interface <interface-ref>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

ingress

ITD ingress interface

interface

ITD ingress interface

interface-ref

Command Mode
  • /exec/configure/itd /exec/configure/itd-inout

ingress interface

[no] ingress interface <interface-ref> [ next-hop <ip-addr> ]

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

ingress

ITD ingress interface

interface

ITD ingress interface

interface-ref

next-hop

(Optional) next hop ip address

ip-addr

(Optional) Next hop IPv4 address connected to ingress intrerface
Command Mode
  • /exec/configure/itd /exec/configure/itd-inout

ingress interface

[no] ingress interface <interface-ref> [ next-hop <ip-addr> ]

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

ingress

PLB ingress interface

interface

PLB ingress interface

interface-ref

next-hop

(Optional) next hop ip address

ip-addr

(Optional) Next hop IPv4 address connected to ingress intrerface
Command Mode
  • /exec/configure/plb /exec/configure/plb-inout

inherit peer-policy

[no] inherit peer-policy <peer-policy-template-name> <policy-preference>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

inherit

Inherit a template

peer-policy

Inherit a peer-policy template

peer-policy-template-name

Template name

policy-preference

Sequence number
Command Mode
  • /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-evpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv4 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv6 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mvpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-mvpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-link-state /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-label /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-label

inherit peer-policy

[no] inherit peer-policy <peer-policy-template-name> <policy-preference>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

inherit

Inherit a template

peer-policy

Inherit a peer-policy template

peer-policy-template-name

Template name

policy-preference

Sequence number
Command Mode
  • /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mdt /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-vpls

inherit peer-session

[no] inherit peer-session <peer-session-template-name>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

inherit

Inherit a template

peer-session

Inherit a peer-session template

peer-session-template-name

Template name
Command Mode
  • /exec/configure/router-bgp/router-bgp-neighbor-sess

inherit peer

[no] inherit peer <peer-template-name>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

inherit

Inherit a template

peer

Inherit a peer template

peer-template-name

Peer template name
Command Mode
  • /exec/configure/router-bgp/router-bgp-neighbor /exec/configure/router-bgp/router-bgp-vrf-neighbor /exec/configure/router-bgp/router-bgp-prefixneighbor /exec/configure/router-bgp/router-bgp-vrf-prefixneighbor

inherit port-profile

[no] inherit port-profile { <s0> | <s1> }

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

inherit

Inherit a port-profile

port-profile

Inherit a port-profile

s0

Enter the name of the profile

s1

Enter the name of the profile
Command Mode
  • /exec/configure/if-any /exec/configure/if-port-channel exec/configure/if-port-channel-range /exec/configure/if-ethernet-m /exec/configure/if-ethernet-switch-m /exec/configure/if-te /exec/configure/if-pseudowire

initial-delay

[no] initial-delay <time-in-sec>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

initial-delay

Configure delay interval to connect to the BMP server

time-in-sec

Delay value
Command Mode
  • /exec/configure/router-bgp/router-bgp-bmp-server

initial-refresh skip

[no] initial-refresh { skip | delay <time-in-sec> }

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

initial-refresh

Configure initial-refresh for the BMP server

skip

Skip sending the initial route update to the BMP server

delay

Delay after which the initial route update is sent to the BMP server

time-in-sec

Delay value
Command Mode
  • /exec/configure/router-bgp/router-bgp-bmp-server

inject-map exist-map

[no] inject-map <inject-map-name> exist-map <exist-map-name> [ copy-attributes ]

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

inject-map

Routemap which specifies prefixes to inject

inject-map-name

Route-map name

exist-map

Routemap which specifies exist condition

exist-map-name

Route-map name

copy-attributes

(Optional) Copy attributes from aggregate
Command Mode
  • /exec/configure/router-bgp/router-bgp-af

install activate

install activate <patch> + [ forced ]

Syntax Description

Syntax Description

install

Install package

activate

Activate package

patch

Package Name

forced

(Optional) non-interactive
Command Mode
  • /exec

install add

install add { <package-name> | <uri1> } [ vrf <vrf-known-name> ] [ [ activate [ upgrade | downgrade ] ] [ forced ] ]

Syntax Description

Syntax Description

install

Install package

add

Add package

package-name

Package name

uri1

Enter package uri

vrf

(Optional) Display per-VRF information

vrf-known-name

(Optional) Known VRF name

activate

(Optional) Activate package

forced

(Optional) non-interactive

upgrade

(Optional) Upgrade package

downgrade

(Optional) Downgrade package
Command Mode
  • /exec

install all

install { all [ nxos <uri> | kickstart <uri1> | system <uri3> | serial ] + [ force ] [ non-disruptive | no-reload | noswitchover ] [ bios | no-save ] [ bios-force ] [ non-interruptive ] [ compact ] | force-all [ nxos <uri> | serial ] + [ non-disruptive ] [ force ] }

Syntax Description

Syntax Description

install

upgrade software

all

Upgrade the system

kickstart

(Optional) boot-variable name

uri1

(Optional) Enter image uri

system

(Optional) boot-variable name

uri3

(Optional) Enter image uri

no-reload

(Optional) Exit right before reload during install.

noswitchover

(Optional) Exit right before reload during install.

non-interruptive

(Optional) Non-Interruptive install.

no-save

(Optional) Config not saved. Manually save config before starting install all

bios

(Optional) BIOS Only

bios-force

(Optional) Forcefully upgrade bios.

force

(Optional) Forcefully allow ISSU with target image .

non-disruptive

(Optional) Non-Disruptive install.

compact

(Optional) Compact image to make it nexus 3k only

nxos

(Optional) boot-variable name

uri

(Optional) Enter image uri

serial

(Optional) Upgrade linecards in serial

force-all

Force upgrade the system
Command Mode
  • /exec

install commit

install commit [ <patch> ]

Syntax Description

Syntax Description

install

Install package

commit

Commit software patch

patch

(Optional) Package Name
Command Mode
  • /exec

install deactivate

install deactivate <patch> + [ forced ]

Syntax Description

Syntax Description

install

Install package

deactivate

Deactivate package

patch

Package Name

forced

(Optional) non-interactive
Command Mode
  • /exec

install epld

install epld <uri1> { { module { <module> } [ force ] } }

Syntax Description

Syntax Description

install

upgrade software

epld

Install EPLD from EPLD image

uri1

Local URI containing EPLD Image

module

Upgrade the modules

module

Enter the module number to be upgraded

force

(Optional) Force Install EPLD from EPLD image
Command Mode
  • /exec

install epld

install epld <uri1> { { module { all } [ force ] } }

Syntax Description

Syntax Description

install

upgrade software

epld

Install EPLD from EPLD image

uri1

Local URI containing EPLD Image

module

Upgrade the modules

all

Install all the modules

force

(Optional) Force Install EPLD from EPLD image
Command Mode
  • /exec

install epld

install epld <uri1> { { module { <module> } { primary | golden } [ force ] } }

Syntax Description

Syntax Description

install

upgrade software

epld

Install EPLD from EPLD image

uri1

Local URI containing EPLD Image

module

Upgrade the modules

module

Enter the module number to be upgraded

primary

Upgrade primary fpga image

golden

Upgrade golden fpga image

force

(Optional) Force Install EPLD from EPLD image
Command Mode
  • /exec

install epld

install epld <uri1> { { module { all } { primary | golden } [ force ] } }

Syntax Description

Syntax Description

install

upgrade software

epld

Install EPLD from EPLD image

uri1

Local URI containing EPLD Image

module

Upgrade the modules

all

Install all the modules

primary

Upgrade primary fpga image

golden

Upgrade golden fpga image

force

(Optional) Force Install EPLD from EPLD image
Command Mode
  • /exec

install epld psu

install epld <uri1> psu

Syntax Description

Syntax Description

install

upgrade software

epld

Install EPLD from EPLD image

uri1

Local URI containing EPLD Image

psu

Upgrade PSU firmware
Command Mode
  • /exec

install feature-set fcoe-npv

[no] install feature-set fcoe-npv

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

install

install a feature-set

feature-set

install feature-set

fcoe-npv

FCOE-NPV
Command Mode
  • /exec/configure

install feature-set fex

[no] install feature-set fex

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

install

install a feature-set

feature-set

install feature-set

fex

FEX
Command Mode
  • /exec/configure

install feature-set mpls

[no] install feature-set mpls

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

install

install a feature-set

feature-set

install feature-set

mpls

MPLS
Command Mode
  • /exec/configure

install license

install license <uri0> [ <s0> ]

Syntax Description

Syntax Description

install

upgrade software

license

install license

uri0

Specify URL for license file

s0

(Optional) Specify a target name for the license file
Command Mode
  • /exec

install module

install module <module> { bios [ [ system <uri0> ] [ forced2 ] ] | bios [ primary | golden ] [ forced ] | image [ { forced1 | system1 <uri1> } ] }

Syntax Description

Syntax Description

install

upgrade software

module

Upgrade for module

module

Enter module index

bios

Upgrade module bios

system

(Optional) System Image

uri0

(Optional) Local URI containing the system Image

forced2

(Optional) Force install bios

primary

(Optional) Upgrade the Primary bios

golden

(Optional) Upgrade the Golden bios

forced

(Optional) Force install bios

image

Upgrade module image

forced1

(Optional) Bypass SRG check

system1

(Optional) System Image

uri1

(Optional) Local URI containing the system Image
Command Mode
  • /exec

install remove

install remove { <patch> | inactive } [ forced ]

Syntax Description

Syntax Description

install

Install package

remove

Remove package

patch

Package Name

inactive

All inactive except non-committed packages

forced

(Optional) Remove package
Command Mode
  • /exec

install reset

install reset

Syntax Description

Syntax Description

install

Install package

reset

Reset software patches and packages to base version

Command Mode

  • /exec

Usage Guidelines

Use this command to remove all application persistency files such as patch rpms, third party rpms, and application configuration in the /etc directory other than configuration.

instance-id

[no] instance-id <iid>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

instance-id

Configures Instance-ID for global data-mappings

iid

24-bit instance-ID value
Command Mode
  • /exec/configure/lisp-dynamic-eid /exec/configure/vrf/lisp-dynamic-eid

instance

[no] instance <plistinst> [ cross-check ] | instance <plistinst>

Syntax Description

Syntax Description

no

Negate a command or set its defaults

instance

Configure a parameter list instance

plistinst

Enter the name of the parameter list instance

cross-check

(Optional) Explicitly search for referencing config profile
Command Mode
  • /exec/configure/param-list

instance

[no] instance <instance-id> [ vlan <vlan-list> ]

Syntax Description

Syntax Description

no

Negate a command or set its defaults

instance

Map vlans to an MST instance

instance-id

MST instance id

vlan

(Optional) Range of vlans to add to the instance mapping

vlan-list

(Optional) vlan range ex: 1-65, 72, 200 - 300
Command Mode
  • /exec/configure/spanning-tree/mst/configuration

instance vlan

instance <instance-id> vlan <vlan-list>

Syntax Description

Syntax Description

instance

Map vlans to an MST instance

instance-id

MST instance id

vlan

Range of vlans to add to the instance mapping

vlan-list

vlan range ex: 1-65, 72, 200 - 300
Command Mode
  • /exec/configure/spanning-tree/mst/configuration

interface-vlan reset credits

interface-vlan reset credits [ <count> ]

Syntax Description

Syntax Description

interface-vlan

Vlan Interface

reset

Reset SVI Credits

credits

SVI Credits

count

(Optional) Set SVI Credit Count
Command Mode
  • /exec/configure

interface-vlan reset fsm

interface-vlan <vlan-id> reset fsm

Syntax Description

Syntax Description

interface-vlan

Vlan Interface

vlan-id

VLAN Id

reset

Reset SVI Credits

fsm

SVI FSM
Command Mode
  • /exec/configure

interface

{ interface <interface-range> } | { no interface }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

interface

Configure ngoam egress interface

interface-range

Configure ngoam egress interface
Command Mode
  • /exec/configure/configngoamprofile

interface

[no] interface <interface-ref>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

interface

egress interface

interface-ref

Command Mode
  • /exec/configure/itd-port-grp

interface

[no] interface <interface>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

interface

Configure interfaces

interface

Interface Name
Command Mode
  • /exec/configure

interface

[no] interface <interface>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

interface

Configure interfaces

interface

Interface Name
Command Mode
  • /exec/configure

interface

[no] interface <interface>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

interface

Configure interfaces

interface

Interface Name
Command Mode
  • /exec/configure

interface

[no] interface <interface>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

interface

Configure interfaces

interface

Interface Name
Command Mode
  • /exec/configure

interface

[no] interface <interface>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

interface

Configure interfaces

interface

Interface Name
Command Mode
  • /exec/configure

interface

[no] interface <interface>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

interface

Configure interfaces

interface

Interface Name
Command Mode
  • /exec/configure

interface

[no] interface <interface>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

interface

Configure interfaces

interface

Interface Name
Command Mode
  • /exec/configure

interface

[no] interface <interface>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

interface

Configure interfaces

interface

Interface Name
Command Mode
  • /exec/configure

interface

interface <interface>

Syntax Description

Syntax Description

interface

Configure interfaces

interface

Interface Name
Command Mode
  • /exec/configure

interface

[no] interface <interface>

Syntax Description

Syntax Description

no

Negate a command or set its defaults

interface

Configure interfaces

interface

Interface Name
Command Mode
  • /exec/configure

interface

[no] interface <interface>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

interface

Configure interfaces

interface

Interface Name
Command Mode
  • /exec/configure

interface

[no] interface <interface-ref>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

interface

egress interface

interface-ref

Command Mode
  • /exec/configure/itd-port-grp

interface breakout module

interface breakout module <module>

Syntax Description

Syntax Description

interface

Configure interfaces

breakout

Configuring the breakout for a module

module

High Bandwidth Module

module

High Bandwidth Module number
Command Mode
  • /exec/configure

interface breakout module

[no] interface breakout module <module>

Syntax Description

Syntax Description

no

Negate a command or set its defaults

interface

Configure interfaces

breakout

Configuring the breakout for a module

module

High Bandwidth Module

module

High Bandwidth Module number
Command Mode
  • /exec/configure

interface breakout module port map

interface breakout module <module> port <port_num> map <breakout_map>

Syntax Description

Syntax Description

interface

Configure interfaces

breakout

Configuring the breakout for an interface

module

High Bandwidth Module

module

High Bandwidth Module number

port

High Bandwidth Port(HBP)

port_num

Parent(HBP / Front-panel) port to be broken out

map

Breakout Map

breakout_map

Breakout Map to be applied to the parent port
Command Mode
  • /exec/configure

interface breakout module port map

[no] interface breakout module <module> port <port_num> map <breakout_map>

Syntax Description

Syntax Description

no

Negate a command or set its defaults

interface

Configure interfaces

breakout

Configuring the breakout for an interface

module

High Bandwidth Module

module

High Bandwidth Module number

port

High Bandwidth Port(HBP)

port_num

Parent(HBP / Front-panel) port to be broken out

map

Breakout Map

breakout_map

Breakout Map to be applied to the parent port
Command Mode
  • /exec/configure

interface down delay

[no] interface down delay |

Syntax Description

Syntax Description

down

delay

no

Negate a command or set its defaults

interface

Add tunnel interface config

delay

Tunnel interface down delay config
Command Mode
  • /exec/configure/if-te

interop-enable

[no] interop-enable

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

interop-enable

Enable interoperability with IOS XR boxes in the network
Command Mode
  • /exec/configure/otv-isis

ip

[no] ip { { group <gaddr> } | { group-range <gaddr_start> to <gaddr_end> } }

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

IP Address

group

Multicast group

gaddr

IPv4 group address

group-range

Multicast Group address range

gaddr_start

First Group address

to

Range

gaddr_end

Last Group address
Command Mode
  • /exec/configure/nbm-flow/policy

ip

ip [ <ipaddress> | <ipprefix> ] | no ip [ <ipaddress> | <ipprefix> ]

Syntax Description

Syntax Description

no

Negate a command or set its defaults

ip

Enable HSRP IPv4 and set the virtual IP address

ipaddress

(Optional) Virtual IP address

ipprefix

(Optional) Virtual IP address and mask length
Command Mode
  • /exec/configure/if-eth-any/hsrp_ipv4

ip

ip { <ipv6address> | autoconfig } | no ip [ { <ipv6address> | autoconfig } ]

Syntax Description

Syntax Description

no

Negate a command or set its defaults

ip

Enable HSRP IPv6 and set the virtual IP address

autoconfig

Obtain address using autoconfiguration
Command Mode
  • /exec/configure/if-eth-any/hsrp_ipv6

ip

[no] ip <ipaddr>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

ip address of redundancy group member

ipaddr

Redundancy-group node IP address
Command Mode
  • /exec/configure/if-nve/rgrp

ip

[no] ip [ <ipaddress> [ secondary ] ]

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Set Virtual IP address

ipaddress

(Optional) Virtual IP address

secondary

(Optional) Make this a secondary IP address
Command Mode
  • /exec/configure/if-eth-any/glbp

ip access-class

[no] ip access-class <name> <inout>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

access-class

Specify IPv4 access control for packets

name

List name

inout

Traffic direction
Command Mode
  • /exec/configure/line

ip access-group

[no] ip access-group <name> <inout>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

access-group

Specify access control for packets

name

List name

inout

Traffic direction
Command Mode
  • /exec/configure/if-set-acl-l3

ip access-list

[no] ip access-list <name> [ client <clienttype> <clientID> ]

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

access-list

Configure access list

name

List name

client

(Optional) set client type

clienttype

(Optional) CLI/ONEP

clientID

(Optional) client appID
Command Mode
  • /exec/configure

ip access-list match-local-traffic

[no] ip access-list match-local-traffic | ip access-list match-local-traffic

Syntax Description

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

access-list

Configure access list

match-local-traffic

Enable access-list matching for locally generated traffic
Command Mode
  • /exec/configure

ip address

[no] ip address [ { <ip-addr> <ip-mask> | <ip-prefix> } [ route-preference <pref> ] [ tag <tag> ] ] | ip address { <ip-addr> <ip-mask> | <ip-prefix> } [ route-preference <pref> ] [ tag <tag> ]

Syntax Description

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

address

Configure IP address on interface

ip-addr

(Optional) IP address in format i.i.i.i

ip-mask

(Optional) IP network mask in format m.m.m.m

ip-prefix

(Optional) IP prefix and network mask length in format x.x.x.x/m

route-preference

(Optional) URIB route preference for local/direct routes

pref

(Optional) Local/direct route preference

tag

(Optional) URIB route tag value for local/direct routes

tag

(Optional) Local/direct tag value
Command Mode
  • /exec/configure/if-igp /exec/configure/if-mgmt-config /exec/configure/if-mpls-tunnel /exec/configure/if-gre-tunnel /exec/configure/if-vsan /exec/configure/if-cpp

ip address dhcp

[no] ip address dhcp

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

address

Configure IP address on interface

dhcp

Configure IP address from a dhcp server
Command Mode
  • /exec/configure/if-vlan /exec/configure/if-ethernet /exec/configure/if-mgmt-config /exec/configure/if-ethernet-all /exec/configure/if-sub

ip address secondary

[no] ip address { <ip-addr> <ip-mask> | <ip-prefix> } secondary [ route-preference <pref> ] [ tag <tag> ] | ip address { <ip-addr> <ip-mask> | <ip-prefix> } secondary [ route-preference <pref> ] [ tag <tag> ]

Syntax Description

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

address

Configure IP address on interface

ip-addr

IP address in format i.i.i.i

ip-mask

IP network mask in format m.m.m.m

ip-prefix

IP prefix and network mask length in format x.x.x.x/m

secondary

Configure additional IP addresses on interface

route-preference

(Optional) URIB route preference for local/direct routes

pref

(Optional) Local/direct route preference

tag

(Optional) URIB route tag value for local/direct routes

tag

(Optional) Local/direct tag value
Command Mode
  • /exec/configure/if-igp /exec/configure/if-mpls-tunnel /exec/configure/if-mgmt-config /exec/configure/if-gre-tunnel /exec/configure/if-6to4-tunnel /exec/configure/if-vsan /exec/configure/if-cpp

ip adjacency cache disable

[no] ip adjacency cache disable

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

adjacency

Configure Adjmgr

cache

Disable cache

disable

Disable cache
Command Mode
  • /exec/configure

ip adjacency forcedownload

ip adjacency [ vrf { <vrf-name> | <vrf-known-name> } ] { <interface> { * | <ip-addr> } | * } forcedownload

Syntax Description

Syntax Description

ip

Configure IP features

adjacency

Configure Adjmgr

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

interface

Display specific interface adjacencies only

ip-addr

IPV4 source address

*

for all adjacencies in this context

forcedownload

Create consistancy in UFDM
Command Mode
  • /exec/configure

ip adjacency l2fm-reg

[no] ip adjacency l2fm-reg { [ vrf <vrf-known-name> ] | <interface> }

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

adjacency

Configure Adjmgr

l2fm-reg

Register with l2fm

vrf

(Optional) vrf name

vrf-known-name

(Optional) Known VRF name

interface

Interface name
Command Mode
  • /exec/configure

ip adjacency notify interval

{ ip adjacency notify interval <time> } | { no ip adjacency notify interval }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

adjacency

Configure Adjmgr

notify

Notify URIB/FIB

interval

Time interval

time

value in milli seconds
Command Mode
  • /exec/configure

ip adjacency peer-gmac

[no] ip adjacency [ vrf { <vrf-name> | <vrf-known-name> } ] { <interface> { * | <ip-addr> } | * } peer-gmac

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

adjacency

Configure Adjmgr

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

interface

Display specific interface adjacencies only

ip-addr

IPV4 source address

*

for all adjacencies in this context

peer-gmac

Set/clear the peer-gmac bit
Command Mode
  • /exec/configure

ip adjacency remote-adj

[no] ip adjacency [ vrf { <vrf-name> | <vrf-known-name> } ] { <interface> { * | <ip-addr> } | * } remote-adj

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

adjacency

Configure Adjmgr

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

interface

Display specific interface adjacencies only

ip-addr

IPV4 source address

*

for all adjacencies in this context

remote-adj

Set/clear the remote-adj bit
Command Mode
  • /exec/configure

ip adjacency route distance

{ ip adjacency route distance <pref> } | { no ip adjacency route distance }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

adjacency

Configure Adjmgr

route

route

distance

admin-distance

pref

preference
Command Mode
  • /exec/configure

ip adjacency statistics collect

{ ip adjacency statistics collect } | { no ip adjacency statistics collect }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

adjacency

Configure Adjmgr

statistics

Statistics

collect

Collection
Command Mode
  • /exec/configure

ip adjacency statistics interval

{ ip adjacency statistics interval <time> } | { no ip adjacency statistics interval }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

adjacency

Configure Adjmgr

statistics

Statistics

interval

Interval

time

Timer timeout value
Command Mode
  • /exec/configure

ip adjmgr internal event-history size

[no] ip adjmgr internal event-history { control | errors | ipc | stats | ha | cli | sdb | snmp | nb | dme-event | event } size { <size_in_text> }

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

adjmgr

AM information

internal

Commands for internal use

event-history

various event logs of Adjmgr

control

Control logs of Adjmgr

errors

error logs of Adjmgr

ipc

ipc debug message logs of Adjmgr

stats

stats debug message logs of Adjmgr

ha

ha debug message logs of Adjmgr

cli

cli related events of Adjmgr

sdb

sdb debug message logs of Adjmgr

snmp

snmp debug message logs of Adjmgr

nb

netbroker debug message logs of Adjmgr

dme-event

dme event logs of Adjmgr

event

events debug message logs of Adjmgr

size

Configure the size of the event-hist buffer

size_in_text

Buffer size
Command Mode
  • /exec/configure

ip adjmgr internal event-history size

[no] ip adjmgr internal event-history { control | errors | ipc | stats | ha | cli | sdb | snmp | nb | dme-event | event } size { <size_in_Kbytes> }

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

adjmgr

AM information

internal

Commands for internal use

event-history

various event logs of Adjmgr

control

Control logs of Adjmgr

errors

error logs of Adjmgr

ipc

ipc debug message logs of Adjmgr

stats

stats debug message logs of Adjmgr

ha

ha debug message logs of Adjmgr

cli

cli related events of Adjmgr

sdb

sdb debug message logs of Adjmgr

snmp

snmp debug message logs of Adjmgr

nb

netbroker debug message logs of Adjmgr

dme-event

dme event logs of Adjmgr

event

events debug message logs of Adjmgr

size

Configure the size of the event-hist buffer

size_in_Kbytes

Size of the file in kbytes
Command Mode
  • /exec/configure

ip allow address-overlap

[no] ip allow address-overlap

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

allow

Allow interface IP address overlap

address-overlap

Allow interface IP address overlap
Command Mode
  • /exec/configure

ip allow port

{ ip allow port { <allow_ports> | none } | no ip allow port [ <allow_ports> | none ] }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

ip

IP protocol

port

Well known UDP/TCP ports

allow

Restrict the set of allowed ports

allow_ports

Comma separated list of ports or ranges

none

Disallow binding to any ports
Command Mode
  • /exec/configure/virt-serv

ip amt anycast-gateway-address

{ { ip amt anycast-gateway-address <address> } | { no ip amt anycast-gateway-address [ <address> ] } | { ipv6 amt anycast-gateway-address <address6> } | { no ipv6 amt anycast-gateway-address [ <address6> ] } }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

amt

AMT global configuration commands

anycast-gateway-address

Configure anycast address for AMT gateway

address

IP anycast address of AMT gateway
Command Mode
  • /exec/configure /exec/configure/vrf

ip amt anycast-relay-prefix

{ { ip amt anycast-relay-prefix <prefix> } | { no ip amt anycast-relay-prefix [ <prefix> ] } | { ipv6 amt anycast-relay-prefix <prefix6> } | { no ipv6 amt anycast-relay-prefix [ <prefix6> ] } }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

amt

AMT global configuration commands

anycast-relay-prefix

Configure anycast prefix for AMT relay

prefix

IP anycast prefix for AMT relay
Command Mode
  • /exec/configure /exec/configure/vrf

ip amt gateway

[no] ip amt gateway

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

amt

AMT global configuration commands

gateway

Configures IPv4 AMT gateway functionality
Command Mode
  • /exec/configure /exec/configure/vrf

ip amt gateway send-discovery

[no] ip amt gateway send-discovery

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

amt

AMT global configuration commands

gateway

Configures IP AMT gateway functionality

send-discovery

Trigger a Discovery message to the Anycast address
Command Mode
  • /exec/configure /exec/configure/vrf

ip amt join-policy

{ [ no ] { ip | ipv6 } amt join-policy <jroute-map> [ gateway <groute-map> ] }

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

amt

AMT global configuration commands

join-policy

Configures what (S,G) are allowed to be joined

jroute-map

Route-map describing (S,G) entries allowed

gateway

(Optional) Configure join-policy per gateway

groute-map

(Optional) Route-map describing gateway or sets of gateways
Command Mode
  • /exec/configure /exec/configure/vrf

ip amt qqic

[no] { ip | ipv6 } amt qqic <qqic-value>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

amt

AMT global configuration commands

qqic

Configure Querier's Query Interval Code

qqic-value

QQIC value
Command Mode
  • /exec/configure /exec/configure/vrf

ip amt relay-advertisement-address

{ { ip amt relay-advertisement-address <address> } | { no ip amt relay-advertisement-address [ <address> ] } | { ipv6 amt relay-advertisement-address <address6> } | { no ipv6 amt relay-advertisement-address [ <address6> ] } }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

amt

AMT global configuration commands

relay-advertisement-address

Address to use by AMT relay

address

IP unicast address for AMT relay to use
Command Mode
  • /exec/configure /exec/configure/vrf

ip amt relay

[no] ip amt relay

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

amt

AMT global configuration commands

relay

Configures IPv4 AMT relay functionality
Command Mode
  • /exec/configure /exec/configure/vrf

ip amt state-limit

{ [ no ] { ip | ipv6 } amt state-limit <limit> [ gateway <route-map> ] }

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

amt

AMT global configuration commands

state-limit

Configure the maximum number of (S,G) entries allowed

limit

Number of entries total or per AMT gateway

gateway

(Optional) Configure state limit per gateway

route-map

(Optional) Route-map describing gateway or sets of gateways
Command Mode
  • /exec/configure /exec/configure/vrf

ip amt tunnel-limit

{ { { ip | ipv6 } amt tunnel-limit <limit> } | { no { ip | ipv6 } amt tunnel-limit [ <limit> ] } }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

ipv6

Configure IPv6 features

amt

AMT global configuration commands

tunnel-limit

Configure the maximum tunnels allowed

limit

Number of tunnels
Command Mode
  • /exec/configure /exec/configure/vrf

ip arp

{ ip arp { [ am mts-batch <batch-timer> ] | [ lookup_timeout <l2rib-timer> ] } }

Syntax Description

Syntax Description

ip

Configure IP features

arp

Configure ARP parameters

am

(Optional) Adjacency Manager

mts-batch

(Optional) Configure ARP-AM mts batch count

lookup_timeout

(Optional) arp_l2rib_lookup_timeout

batch-timer

(Optional) Interval in milliseconds

l2rib-timer

(Optional) Interval in seconds
Command Mode
  • /exec/configure

ip arp

{ ip arp <ip-address> <mac-address> | no ip arp <ip-address> [ <mac-address> ] }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

arp

Configure ARP parameters

ip-address

IP address

mac-address

MAC address
Command Mode
  • /exec/configure/if-igp /exec/configure/if-mgmt-config /exec/configure/if-vlan-common

ip arp allow-static-arp-outside-subnet

[no] ip arp allow-static-arp-outside-subnet

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

arp

Configure ARP parameters

allow-static-arp-outside-subnet

Allow static ARP outside interface subnet
Command Mode
  • /exec/configure

ip arp broadcast mac-mismatch

{ ip arp broadcast mac-mismatch } | { no ip arp broadcast mac-mismatch }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

arp

Configure ARP parameters

broadcast

Enable/disable arp broadcasr

mac-mismatch

when there is a smac mismatch
Command Mode
  • /exec/configure

ip arp cache disable

[no] ip arp cache disable

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

arp

Configure ARP parameters

cache

Disable cache

disable

Disable cache
Command Mode
  • /exec/configure

ip arp cache limit

{ { ip arp cache limit <max> } | { no ip arp cache limit } } [ syslog <rate> ]

Syntax Description

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

arp

Configure ARP parameters

cache

ARP cache parameters

limit

Limit size of ARP adjacencies cache

max

Maximum number of ARP entries

syslog

(Optional) Syslog messages

rate

(Optional) Syslogs per second
Command Mode
  • /exec/configure

ip arp cfs-queue

{ ip arp cfs-queue <size> } | { no ip arp cfs-queue }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

arp

ARP

cfs-queue

cfs-queue

size

Size for adjacencies to be sent in CFSoE payload
Command Mode
  • /exec/configure

ip arp cos

{ ip arp cos <cosval> } | { no ip arp cos }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

arp

Configure ARP parameters

cos

COS for ARP packet

cosval

COS value
Command Mode
  • /exec/configure

ip arp delete-adj-on-mac-delete

[no] ip arp delete-adj-on-mac-delete

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

arp

Configure ARP parameters

delete-adj-on-mac-delete

Delete the adjacency on MAC delete
Command Mode
  • /exec/configure/if-vlan-common

ip arp event-history size

[no] ip arp event-history { packet | event | sync-event | ip-sync-event | control | ha | errors | lcache | lcache-errors | client-event | client-errors | snmp | cli | suppression-event | suppression-errors | controller-errors | dme-event } size { <size_in_text> }

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

IP events

arp

Configure ARP parameters

event-history

log debug events into event history buffer

packet

inst packet logs

event

Internal event logs

sync-event

CFS and MCECM related event logs

ip-sync-event

L3 over vpc events

control

ARP control event logs

ha

HA and GR logs

errors

inst error logs

lcache

lcache logs

lcache-errors

lcache_error logs

client-event

Client_event logs

client-errors

Client_error logs

cli

cli logs

snmp

SNMP logs

suppression-event

ARP suppression event logs

suppression-errors

ARP suppression error logs

controller-errors

Controller MAC-IP route error logs

dme-event

ARP DME event logs

size

Configure the size of the event-hist buffer

size_in_text

Buffer size
Command Mode
  • /exec/configure

ip arp event-history size

[no] ip arp event-history { packet | event | sync-event | ip-sync-event | control | ha | errors | lcache | lcache-errors | client-event | client-errors | snmp | cli | suppression-event | suppression-errors | dme-event } size { <size_in_Kbytes> }

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

IP events

arp

Configure ARP parameters

event-history

log debug events into event history buffer

packet

inst packet logs

event

Internal event logs

sync-event

CFS and MCECM related event logs

ip-sync-event

L3 over vpc events

control

ARP control event logs

ha

HA and GR logs

errors

inst error logs

lcache

lcache logs

lcache-errors

lcache_error logs

client-event

Client_event logs

client-errors

Client_error logs

cli

cli logs

snmp

SNMP logs

suppression-event

ARP suppression event logs

suppression-errors

ARP suppression error logs

dme-event

ARP DME event logs

size

Configure the size of the event-hist buffer

size_in_Kbytes

Size of the file in kbytes
Command Mode
  • /exec/configure

ip arp garp-storm

{ ip arp garp-storm } | { no ip arp garp-storm }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

arp

Configure ARP parameters

garp-storm

Configure timer values for garp-storm
Command Mode
  • /exec/configure

ip arp garp-storm timer count

{ ip arp garp-storm timer <garp-timer> count <garp-count> } | { no ip arp garp-storm timer <garp-timer> count <garp-count> }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

arp

Configure ARP parameters

garp-storm

Configure timer values for garp-storm

timer

Set the garp-storm timer value in seconds

garp-timer

Timer value in seconds

count

Set the garp count value

garp-count

Timer value in seconds
Command Mode
  • /exec/configure

ip arp gratuitous hsrp duplicate

{ ip arp gratuitous hsrp duplicate | no ip arp gratuitous hsrp duplicate }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

arp

Configure ARP parameters

gratuitous

gratuitous

hsrp

hsrp

duplicate

duplicate address detection
Command Mode
  • /exec/configure/if-igp /exec/configure/if-mgmt-config /exec/configure/if-vlan-common

ip arp gratuitous request

{ ip arp gratuitous request | no ip arp gratuitous request }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

arp

Configure ARP parameters

gratuitous

gratuitous

request

Enable/Disable sending grat. arp request when duplicate address detected
Command Mode
  • /exec/configure/if-igp /exec/configure/if-mgmt-config /exec/configure/if-vlan

ip arp gratuitous update

{ ip arp gratuitous update | no ip arp gratuitous update }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

arp

Configure ARP parameters

gratuitous

gratuitous

update

Enable/Disable arp cache updates for gratuitous arp
Command Mode
  • /exec/configure/if-igp /exec/configure/if-mgmt-config /exec/configure/if-vlan-common

ip arp inspection filter vlan

[no] ip arp inspection filter <arp-acl-name> vlan <vlan-range>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

arp

Configure ARP parameters

inspection

Arp Inspection configuration

filter

Filter

arp-acl-name

Access list name

vlan

Vlan range

vlan-range

VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19
Command Mode
  • /exec/configure

ip arp inspection log-buffer entries

[no] ip arp inspection log-buffer { entries <number1> }

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

arp

Configure ARP parameters

inspection

Arp Inspection configuration

log-buffer

Log Buffer Configuration

entries

Number of entries for log buffer

number1

Number of entries for log buffer
Command Mode
  • /exec/configure

ip arp inspection trust

[no] ip arp inspection trust

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

arp

Configure ARP parameters

inspection

Arp Inspection configuration

trust

Configure trust state
Command Mode
  • /exec/configure/if-switching

ip arp inspection validate

[no] ip arp inspection validate { src-mac | dst-mac | ip1 } +

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

arp

Configure ARP parameters

inspection

Arp Inspection configuration

validate

Validate addresses

src-mac

Validate source MAC address

dst-mac

Validate destination MAC address

ip1

Validate IP addresses
Command Mode
  • /exec/configure

ip arp inspection vlan

[no] ip arp inspection vlan <vlan-id> [ logging { dhcp-bindings { permit | all | inone } } ]

Syntax Description

Syntax Description

logging

(Optional) dhcp-bindings

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

arp

Configure ARP parameters

inspection

Arp Inspection configuration

vlan

Enable/Disable ARP Inspection on vlans

vlan-id

VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19

dhcp-bindings

(Optional) Logging of packet that match DHCP bindings

permit

(Optional) Log DHCP Binding Permitted packets

all

(Optional) Log all packets that match DHCP bindings

inone

(Optional) Do not log packets
Command Mode
  • /exec/configure

ip arp mts-queue

{ ip arp mts-queue <size> } | { no ip arp mts-queue }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

arp

ARP

mts-queue

mts-queue

size

Size for arp data sap qlimit
Command Mode
  • /exec/configure

ip arp off-list timeout

{ ip arp off-list timeout <time> } | { no ip arp off-list timeout }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

arp

Configure ARP parameters

off-list

off-list

timeout

Expire time

time

Expire time value in seconds
Command Mode
  • /exec/configure

ip arp rarp fabric-forwarding

[no] ip arp rarp fabric-forwarding

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

arp

Configure ARP parameters

rarp

Enable/Disable forwarding of RARP messages on fabric

fabric-forwarding

Forward RARP requests to the fabric
Command Mode
  • /exec/configure

ip arp rarp fabric-forwarding rate-limit

[no] ip arp rarp fabric-forwarding rate-limit <rate>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

ip

Configure IP features

arp

Configure ARP parameters

rarp

Enable/Disable forwarding of RARP messages on fabric

fabric-forwarding

Forward RARP requests to the fabric

rate-limit

Forwarding rate of the RARP frames

rate

RARP frames-per-second
Command Mode
  • /exec/configure

ip arp request

ip arp request <ip-address>

Syntax Description

Syntax Description

ip