T Commands

table-map

[no] table-map <rmap-name> [ filter ]

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

table-map

Apply table-map to filter routes downloaded into URIB

rmap-name

Route-map name

filter

(Optional) Selective route download

Command Mode
  • /exec/configure/router-bgp/router-bgp-af

table-map

[no] table-map <policy-name> [ filter ]

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

table-map

Policy for filtering/modifying OSPF routes before sending them to RIB

policy-name

Route-map name

filter

(Optional) To block the OSPF routes from being sent to RIB

Command Mode
  • /exec/configure/router-ospf /exec/configure/router-ospf/vrf

table-map

[no] table-map <table-map-name>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

table-map

Configure a table map

table-map-name

Table map name

Command Mode
  • /exec/configure

table-map

table-map <default-tmap-enum-name>

Syntax Description

Syntax Description

table-map

Configure a table map

default-tmap-enum-name

Command Mode
  • /exec/configure

table-map

[no] table-map <policy-name> [ filter ]

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

table-map

Table-map policy used to filter routes and tune attributes before downloading to RIB

filter

(Optional) Filter the routes based on policy results

policy-name

A 'routing-rules' route-map name

Command Mode
  • /exec/configure/router-isis/router-isis-vrf-common /exec/configure/router-isis/router-isis-af-ipv4

table-map

[no] table-map <policy-name> [ filter ]

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

table-map

Table-map policy used to filter routes and tune attributes before downloading to RIB

filter

(Optional) Filter the routes based on policy results

policy-name

A 'routing-rules' route-map name

Command Mode
  • /exec/configure/router-isis/router-isis-af-ipv6

table-map

[no] table-map <policy-name> [ filter ]

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

table-map

Policy for filtering/modifying OSPFV3 routes before sending them to RIB

policy-name

Route-map name

filter

(Optional) To block the OSPFV3 routes from being sent to RIB

Command Mode
  • /exec/configure/router-ospf3/router-ospf3-af-ipv6 /exec/configure/router-ospf3/vrf/router-ospf3-af-ipv6

table-map

[no] table-map <map> [ filter ]

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

table-map

Configure Table Map information

map

Route-map name

filter

(Optional) Filter routes which are rejected by route-map

Command Mode
  • /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

tac-pac

tac-pac [ <uri0> ]

Syntax Description

Syntax Description

tac-pac

save tac info in a compressed .gz file at specific location

uri0

(Optional) Select destination filesystem

Command Mode
  • /exec

tac-pac

tac-pac [ <uri0> [ vrf <vrf-known-name> ] ]

Syntax Description

Syntax Description

tac-pac

save tac info in a compressed .gz file at specific location

uri0

(Optional) Select destination filesystem

vrf

(Optional) Display per-VRF information

vrf-known-name

(Optional) Known VRF name

Command Mode
  • /exec

tacacs-server deadtime

[no] tacacs-server deadtime <i0>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

tacacs-server

Configure TACACS+ server related parameters

deadtime

duration for which non-reachable server is skipped

i0

Length of time, in minutes

Command Mode
  • /exec/configure

tacacs-server directed-request

[no] tacacs-server directed-request

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

tacacs-server

Configure TACACS+ server related parameters

directed-request

enable direct authentication requests to server

Command Mode
  • /exec/configure

tacacs-server host key 0 6 7

{ { [ no ] tacacs-server host { <hostipname> } { { key { 0 <s0> | 6 <s6> | 7 <s1> | <s2> } [ port <i1> ] [ timeout <i2> ] } | { [ port1 <i3> ] [ timeout1 <i4> ] } } } | { no tacacs-server host <hostipname> key } }

Syntax Description

Syntax Description

key

0

no

(Optional) Negate a command or set its defaults

tacacs-server

Configure TACACS+ server related parameters

host

TACACS+ server's DNS name or its IP address

hostipname

IPV4/IPV6 address or DNS name

key

TACACS+ shared secret

0

TACACS+ shared secret(clear text)

s0

TACACS+ shared secret(clear text)

port

(Optional) TACACS+ server port

i1

(Optional) TACACS+ server port

timeout

(Optional) TACACS+ server timeout period in seconds

i2

(Optional) TACACS+ server timeout period in seconds

6

TACACS+ shared secret(type-6 encrypted)

s6

TACACS+ shared secret(encrypted)

7

TACACS+ shared secret(encrypted)

s1

TACACS+ shared secret(encrypted)

port1

(Optional) TACACS+ server port

i3

(Optional) TACACS+ server port

timeout1

(Optional) TACACS+ server timeout period in seconds

i4

(Optional) TACACS+ server timeout period in seconds

s2

TACACS+ shared secret(clear text)

Command Mode
  • /exec/configure

tacacs-server host test

[no] tacacs-server host <hostipnam> test { { username <s0> { [ password <s1> [ idle-time <i1> ] ] | [ idle-time <i1> ] } } | { password <s1> [ idle-time <i1> ] } | { idle-time <i1> } }

Syntax Description

Syntax Description

username

<s0>

no

(Optional) Negate a command or set its defaults

tacacs-server

Configure TACACS+ server related parameters

host

TACACS+ server's DNS name or its IP address

hostipnam

IPV4/IPV6 address or DNS name

test

Parameters to send test packets

s0

user name

password

(Optional) user password in test packets

s1

(Optional) user password

idle-time

(Optional) time interval for monitoring the server

i1

(Optional) time period in minutes

Command Mode
  • /exec/configure

tacacs-server key 0 6 7

{ { [ no ] tacacs-server key { 0 <s0> [ timeout <i0> ] | 6 <s6> [ timeout6 <i6> ] | 7 <s1> [ timeout1 <i1> ] | <s2> [ timeout2 <i2> ] } } | { no tacacs-server key } }

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

tacacs-server

Configure TACACS+ server related parameters

key

Global TACACS+ server shared secret

0

default TACACS+ shared secret(clear text)

s0

default TACACS+ shared secret(clear text)

timeout

(Optional) Global TACACS+ server timeout period in seconds

i0

(Optional) Global TACACS+ server timeout period in seconds

6

default TACACS+ shared secret(type-6 encrypted)

s6

default TACACS+ shared secret(type-6 encrypted)

timeout6

(Optional) Global TACACS+ server timeout period in seconds

i6

(Optional) Global TACACS+ server timeout period in seconds

7

default TACACS+ shared secret(encrypted)

s1

default TACACS+ shared secret(encrypted)

timeout1

(Optional) Global TACACS+ server timeout period in seconds

i1

(Optional) Global TACACS+ server timeout period in seconds

s2

default TACACS+ shared secret(clear text)

timeout2

(Optional) Global TACACS+ server timeout period in seconds

i2

(Optional) Global TACACS+ server timeout period in seconds

Command Mode
  • /exec/configure

tacacs-server test

[no] tacacs-server test { { username <s0> { [ password <s1> [ idle-time <i1> ] ] | [ idle-time <i1> ] } } | { password <s1> [ idle-time <i1> ] } | { idle-time <i1> } }

Syntax Description

Syntax Description

username

<s0>

no

(Optional) Negate a command or set its defaults

tacacs-server

Configure TACACS+ server related parameters

test

Parameters to send test packets

s0

user name

password

(Optional) user password in test packets

s1

(Optional) user password

idle-time

(Optional) time interval for monitoring the server

i1

(Optional) time period in minutes

Command Mode
  • /exec/configure

tacacs-server timeout

[no] tacacs-server timeout <i0>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

tacacs-server

Configure TACACS+ server related parameters

timeout

Global TACACS+ server timeout period in seconds

i0

Global TACACS+ server timeout period in seconds

Command Mode
  • /exec/configure

tacacs enable

[no] tacacs + enable

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

enable

Enable tacacs+

Command Mode
  • /exec/configure

tag

{ { no | default } tag | tag <text> }

Syntax Description

Syntax Description

no

default

Set a command to its defaults

tag

User defined tag

text

Tag string line

Command Mode
  • /exec/configure/ip-sla/udp /exec/configure/ip-sla/jitter /exec/configure/ip-sla/tcp /exec/configure/ip-sla/icmpEcho /exec/configure/ip-sla/dns /exec/configure/ip-sla/fabricPathEcho /exec/configure/ip-sla/http

tag happens in

[no] tag <tag_id> <op> <tag_id> [ <op> <tag_id> [ <op> <tag_id> ] ] happens <threshold> in <interval> | no tag

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

tag

event tag identifier

tag_id

tag name

op

boolean operator

happens

The number of occurrences before raising the event

threshold

Occurs value

in

Number of occurrences must occur within this time period

interval

Enter seconds value

Command Mode
  • /exec/configure/event-manager-applet

tahoe-python module

tahoe-python module <module>

Syntax Description

Syntax Description

tahoe-python

enter python mode for tahoe systems

module

Module number of the linecard

module

Enter module number

Command Mode
  • /exec

tahoe-python module quoted

tahoe-python module <module> quoted <quoted-cmd>

Syntax Description

Syntax Description

tahoe-python

enter python mode for tahoe systems

module

Module number of the linecard

module

Enter module number

quoted

enter the command with quotes Add multiple commands separated by semi-colon

quoted-cmd

the command(s) to run in tahoe python

Command Mode
  • /exec

tail

tail <uri0> [ <i1> ]

Syntax Description

Syntax Description

tail

Display the last part of a file

uri0

Filename to be displayed

i1

(Optional) Enter the number of lines to be displayed

Command Mode
  • /exec

tail

| tail [ -n <lines> ]

Syntax Description

Syntax Description

|

Pipe command output to filter

tail

Display last lines

-n

(Optional) modify number of lines (default 10)

lines

(Optional) number of lines to print

Command Mode
  • /output

tar

tar { create <new-archive-file> [ gz-compress | bz2-compress | uncompressed ] + [ remove | absolute | verbose ] + <files> + | append <archive-file> [ remove | absolute | verbose ] + <files> + | extract <archive-file> [ screen | to <dest-dir> | keep-old | verbose ] + | list <archive-file> }

Syntax Description

Syntax Description

tar

archiving operations

create

create an archive (merge several files together)

append

append some files to an existing archive

extract

extract files from archive (unmerge them)

verbose

(Optional) display files while merging/extracting

gz-compress

(Optional) compress archive with gzip, the default -> .tar.gz

bz2-compress

(Optional) compress archive with bzip2 -> .tar.bz2

uncompressed

(Optional) dont compress archive -> .tar

remove

(Optional) remove files after adding them to the archive

absolute

(Optional) don't strip leading `/'s from file names

keep-old

(Optional) don't replace existing files when extracting

screen

(Optional) extract files to screen

list

shows the list of files which are part of the archive

new-archive-file

the name of the archive (extension will be added if none of tar/tgz/tar.gz/tar.bz2/tbz2/tar.Z specified)

archive-file

the name of the archive (extension will be added if none of tar/tgz/tar.gz/tar.bz2/tbz2/tar.Z specified)

files

name of file to be added into archive

to

(Optional) extract to specific directory (default is bootflash)

dest-dir

(Optional) destination dir where to extract to (created if not exist), default is bootflash

Command Mode
  • /exec

tclsh

tclsh <file> [ <args> ] +

Syntax Description

Syntax Description

tclsh

source tclsh script

file

the file to run

args

(Optional) args to tcl script

Command Mode
  • /exec

tclsh

tclsh

Syntax Description

Syntax Description

tclsh

Execute tclsh

Command Mode
  • /exec

tcp-connect

[no] tcp-connect { <hostname> | <ip-address> } <dest-port> { [ control { disable | enable } ] [ source-ip { <source-ip-hostname> | <source-ip-address> } ] [ source-port <src-port> ] } +

Syntax Description

Syntax Description

no

(Optional)

control

(Optional) enable

source-ip-address

(Optional) <src-port>

tcp-connect

TCP Connect Operation

hostname

Destination hostname, broadcast disallowed

ip-address

Destination IP address, broadcast disallowed

dest-port

Port Number (Recommended port range between 1025-65534)

enable

(Optional) Enable control packets exchange (default)

disable

(Optional) Disable control packets exchange

source-ip

(Optional) Source address

source-ip-hostname

(Optional) source IP hostname, broadcast disallowed

source-port

(Optional) Source Port

src-port

(Optional) Port Number (Recommended port range between 1025-65534)

Command Mode
  • /exec/configure/ip-sla

telemetry

[no] telemetry

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its default

telemetry

Command Mode
  • /exec/configure

telnet

{ telnet { <so> | <host> } } [ <i0> ] [ [ source { <host_src> | <interface> } ] [ vrf { <vrf-name> | <vrf-known-name> } ] ]

Syntax Description

Syntax Description

telnet

Telnet to another system

so

Enter hostname

host

Enter a valid IPv4 address

source

(Optional) Set source address in IPv4 header

host_src

(Optional) Set IPV4 address as source

interface

(Optional) Set interface to send IPv4 packet

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

i0

(Optional) Enter the port number

Command Mode
  • /exec

telnet6

{ telnet6 { <s1> | <host1> } } [ <i0> ] [ [ source { <host1_src> | <interface> } ] [ vrf { <vrf-name> | <vrf-known-name> } ] ]

Syntax Description

Syntax Description

telnet6

Telnet6 to another system using IPv6 addressing

s1

Enter hostname

source

(Optional) Set source address in IPv6 header

interface

(Optional) Set interface to send IPv6 packet

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

i0

(Optional) Enter the port number

Command Mode
  • /exec

telnet login-attempts

{ { telnet login-attempts <d0> } | { no telnet login-attempts [ <d0> ] } }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

telnet

telnet login

login-attempts

Set maximum login attempts

d0

Specify max-attempt number

Command Mode
  • /exec/configure/

telnet server enable

[no] telnet server enable

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

telnet

Enable telnet

server

Enable telnet

enable

Enable telnet

Command Mode
  • /exec/configure

template

template <res-mgr-template-known-name-all>

Syntax Description

Syntax Description

template

Change the template for this vdc

res-mgr-template-known-name-all

Resource template for this vdc

Command Mode
  • /exec/configure/vdc

template data timeout

{ [ no ] template data timeout <time> | no template data timeout }

Syntax Description

Syntax Description

template

Version 9 Template

data

Data

timeout

Template Data resend time

time

Time in seconds

Command Mode
  • /exec/configure/nfm-exporter-v9

template peer-policy

[no] template peer-policy <peer-policy-template-name>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

template

Enter template command mode

peer-policy

Template configuration for policy parameters

peer-policy-template-name

Name of peer-policy template

Command Mode
  • /exec/configure/router-bgp

template peer-session

[no] template peer-session <peer-session-template-name>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

template

Enter template command mode

peer-session

Template configuration for session parameters

peer-session-template-name

Name of peer-session template

Command Mode
  • /exec/configure/router-bgp

template peer

[no] template peer <peer-template-name>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

template

Enter template command mode

peer

Template configuration for peer parameters

peer-template-name

Neighbor template name

Command Mode
  • /exec/configure/router-bgp

terminal

terminal { monitor | no { monitor1 | monitor-force } }

Syntax Description

Syntax Description

terminal

Set terminal line parameters

monitor

Copy Syslog output to the current terminal line

no

Negate a command or set its defaults

monitor1

Copy Syslog output to the current terminal line

monitor-force

Copy Syslog output to the current terminal line

Command Mode
  • /exec

terminal alias

[no] terminal alias [ persist ] [ <alias-name> [ <command> ] ]

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

terminal

Set terminal line parameters

alias

show aliases (if no arugments) create 'exec' aliases (not persistent). Persistent aliases are in config mode, see 'cli alias

persist

(Optional) add terminal alias to <username>.rc.cli file (auto-execed at login time)

alias-name

(Optional) Name of the alias. (if last argument: shows the value of that alias) Command lines can start with an alias and it will be expanded before parsing. An alias can also be used right after a pipe. The substitution text can contain things like '$1 $2' and those $<number> will be substituted by correspondingly numbered token from the command line starting the counting after the alias.

command

(Optional) Value of the alias (what the alias will be substituted with)

Command Mode
  • /exec

terminal ask-on-term

[no] terminal ask-on-term <term>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

terminal

Set terminal line parameters

ask-on-term

ask backend driven question on given terminal

term

the terminal (/dev/ptsX)

Command Mode
  • /exec

terminal color

[no] terminal color [ persist ]

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

terminal

Set terminal line parameters

color

enable colorization of prompt(green if last command ok, red if error), command line (blue), output (default color)

persist

(Optional) add command to <username>.rc.cli file (auto-execed at login time)

Command Mode
  • /exec

terminal context management

[no] terminal context management

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

terminal

Set terminal line parameters

context

set the vrf context

management

vrf context management

Command Mode
  • /exec

terminal deep-help

[no] terminal deep-help

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

terminal

Set terminal line parameters

deep-help

enable cli syntax and list

Command Mode
  • /exec

terminal dont-ask

[no] terminal dont-ask [ persist ]

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

terminal

Set terminal line parameters

dont-ask

Don't ask 'are you sure' questions, take default answer instead

persist

(Optional) add command to <username>.rc.cli file (auto-execed at login time)

Command Mode
  • /exec

terminal edit-mode vi

[no] terminal edit-mode vi [ persist ]

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

terminal

Set terminal line parameters

edit-mode

set command line edition keys (vi or emacs emacs is default)

vi

edit like in vi by default in insert-mode, use ~ for command-mode

persist

(Optional) add command to <username>.rc.cli file (auto-execed at login time)

Command Mode
  • /exec

terminal event-manager bypass

terminal [ <noarg> ] event-manager bypass

Syntax Description

Syntax Description

terminal

Set terminal line parameters

noarg

(Optional)

event-manager

Event manager cli event

bypass

Bypass event manager cli event publish

Command Mode
  • /exec

terminal history no-exec-in-config

[no] terminal history no-exec-in-config

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

terminal

Set terminal line parameters

history

configure terminal history properties

no-exec-in-config

don't recall exec commands while in config mode

Command Mode
  • /exec

terminal history no-exec-in-config

[no] terminal history no-exec-in-config

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

terminal

Set terminal line parameters

history

configure terminal history properties

no-exec-in-config

don't recall exec commands while in config mode

Command Mode
  • /exec

terminal history no-exec-in-config

[no] terminal history no-exec-in-config

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

terminal

Set terminal line parameters

history

configure terminal history properties

no-exec-in-config

don't recall exec commands while in config mode

Command Mode
  • /exec

terminal home

terminal home

Syntax Description

Syntax Description

terminal

Set terminal line parameters

home

go back to line 1 position 1 without erasing the screen (to be used in cli command loops)

Command Mode
  • /exec

terminal length

terminal length <i0>

Syntax Description

Syntax Description

terminal

Set terminal line parameters

length

Set number of lines on a screen

i0

Number of lines on screen (0 for no pausing)

Command Mode
  • /exec

terminal length

terminal length <i0>

Syntax Description

Syntax Description

terminal

Set terminal line parameters

length

Set number of lines on a screen

i0

Number of lines on screen (0 for no pausing)

Command Mode
  • /exec/configure/console

terminal lock

terminal lock

Syntax Description

Syntax Description

terminal

Set terminal line parameters

lock

Locks the CLI Config mode

Command Mode
  • /exec

terminal log-all

[no] terminal log-all

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

terminal

Configure terminal settings

log-all

Accounting log all commands including the show commands

Command Mode
  • /exec/configure

terminal no

terminal no { length | terminal-type | width }

Syntax Description

Syntax Description

terminal

Set terminal line parameters

no

Negate a command or set its defaults

length

Set number of lines on a screen

terminal-type

Set the terminal type

width

Set width of the display terminal

Command Mode
  • /exec

terminal output xml

[no] terminal output xml

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

terminal

Set terminal line parameters

output

how output of show commands should be formated

xml

xml output

Command Mode
  • /exec

terminal output xml

[no] terminal output xml <namespace-version>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

terminal

Set terminal line parameters

output

how output of show commands should be formated

xml

xml output

namespace-version

enter the version for xml output

Command Mode
  • /exec

terminal output xml

[no] terminal output xml

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

terminal

Set terminal line parameters

output

how output of show commands should be formated

xml

xml output

Command Mode
  • /exec

terminal password

terminal password <password> | no terminal password [ <password> ]

Syntax Description

Syntax Description

no

Negate a command or set its defaults

terminal

Set terminal line parameters

password

set a password to be used in copy scp/ftp commands use online help on the argument to disable echo so you don't need to type control-x-e twice (to toggle echo), echo will be re-enabled after carriage-return

password

Enter the password (online help that you just did disabled echo so type your password and press return

Command Mode
  • /exec

terminal prompt

[no] terminal prompt [ fix [ <name> ] [ with-cr ] | mode | { fq-command | command } | status | exec-time | time | no-echo ] +

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

terminal

Set terminal line parameters

prompt

configure how the prompt should look like

fix

(Optional) set the prompt to a fix name (default _prompt_)

with-cr

(Optional) add a carriage return at the end of the prompt

name

(Optional) name to use as a fix prompt

mode

(Optional) include the cli mode name (ex: config-if) into the promt

fq-command

(Optional) include the fully qualified command just executed (formatted like in accounting log)

command

(Optional) include the previous command (not including the mode and mode instance)

status

(Optional) include the status of previous command (0=success)

exec-time

(Optional) include the time it took to execute previous command

time

(Optional) include the time when prompt was printed

no-echo

(Optional) dont echo the typed characters

Command Mode
  • /exec

terminal redirection-mode

terminal redirection-mode <mode>

Syntax Description

Syntax Description

terminal

Set terminal line parameters

redirection-mode

Set the redirection mode

mode

Command Mode
  • /exec

terminal reset-role

terminal reset-role <num>

Syntax Description

Syntax Description

terminal

Set terminal line parameters

reset-role

Reset the privilege role to default

num

Enter the role num

Command Mode
  • /exec

terminal reset vlan-config-mutex

terminal reset vlan-config-mutex

Syntax Description

Syntax Description

terminal

Set terminal line parameters

reset

Force reset of the vlan config mode mutex

vlan-config-mutex

Vlan configuration mutex

Command Mode
  • /exec

terminal session-timeout

terminal session-timeout <i0>

Syntax Description

Syntax Description

terminal

Set terminal line parameters

session-timeout

Set session timeout

i0

Enter timeout in minutes, 0 to disable

Command Mode
  • /exec

terminal sticky-mode

terminal [ <noarg> ] sticky-mode

Syntax Description

Syntax Description

terminal

Set terminal line parameters

noarg

(Optional)

sticky-mode

Search for the command match in current mode only

Command Mode
  • /exec

terminal terminal-type

terminal terminal-type <s0>

Syntax Description

Syntax Description

terminal

Set terminal line parameters

terminal-type

Set the terminal type

s0

Terminal type

Command Mode
  • /exec

terminal time

terminal time [ <name> ] [ delta ]

Syntax Description

Syntax Description

terminal

Set terminal line parameters

time

save the current time under a variable

name

(Optional) the variable to store the time in

delta

(Optional) print the delta time to the currently saved time value

Command Mode
  • /exec

terminal tree-update

terminal tree-update

Syntax Description

Syntax Description

terminal

Set terminal line parameters

tree-update

Updates the main parse tree

Command Mode
  • /exec

terminal unlock

terminal unlock

Syntax Description

Syntax Description

terminal

Set terminal line parameters

unlock

Force unlocking of the CLI config mode

Command Mode
  • /exec

terminal verify-only

terminal [ <noarg> ] verify-only [ username <user> ]

Syntax Description

Syntax Description

terminal

Set terminal line parameters

noarg

(Optional)

verify-only

Verify command and do not execute

username

(Optional) Username for aaa authorization

user

(Optional) Username for aaa authorization

Command Mode
  • /exec

terminal width

terminal width <i0>

Syntax Description

Syntax Description

terminal

Set terminal line parameters

width

Set width of the display terminal

i0

Number of characters on a screen line

Command Mode
  • /exec

terminal width

terminal width <i0>

Syntax Description

Syntax Description

terminal

Set terminal line parameters

width

Set width of the display terminal

i0

Number of characters on a screen line

Command Mode
  • /exec/configure/console

threshold-percent

threshold-percent { percent-threshold { percentup <up-percentage> [ percentdown<down-percentage> ] | percentdown<down-percentage> [ percentup <up-percentage> ] } } | no threshold-percent { percent-threshold }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

threshold-percent

Threshold parameters

percent-threshold

Percentage threshold

percentup

Up threshold

up-percentage

Up threshold percentage

Command Mode
  • /exec/configure/tr-list-thrp

threshold

{ { no | default } threshold | threshold <milliseconds> }

Syntax Description

Syntax Description

no

default

Set a command to its defaults

threshold

Operation threshold

milliseconds

Millisecond threshold value

Command Mode
  • /exec/configure/ip-sla/udp /exec/configure/ip-sla/jitter /exec/configure/ip-sla/tcp /exec/configure/ip-sla/icmpEcho /exec/configure/ip-sla/dns /exec/configure/ip-sla/fabricPathEcho /exec/configure/ip-sla/http

time-range

[no] time-range <name>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

time-range

Define time range entries

name

Time range name

Command Mode
  • /exec/configure

timeout

{ { no | default } timeout |

Syntax Description

Syntax Description

no

default

Set a command to its defaults

timeout

Timeout of an operation

Command Mode
  • /exec/configure/ip-sla/udp /exec/configure/ip-sla/jitter /exec/configure/ip-sla/tcp /exec/configure/ip-sla/icmpEcho /exec/configure/ip-sla/dns /exec/configure/ip-sla/fabricPathEcho /exec/configure/ip-sla/http

timer

timer <value> | no timer

Syntax Description

Syntax Description

no

Negate a command or set its defaults

timer

Configure Bundle timer value

value

Hello timer value

Command Mode
  • /exec/configure/anycast

timers

timers <keepalive-interval> <hold-time> | { no | default } timers [ <keepalive-interval> <hold-time> ]

Syntax Description

Syntax Description

no

Negate a command or set its defaults

default

Inherit values from a peer template

timers

Configure keepalive and hold timers

keepalive-interval

Keepalive interval (seconds)

hold-time

Holdtime (seconds)

Command Mode
  • /exec/configure/router-bgp/router-bgp-neighbor-sess

timers

timers { <hello-time> { <hold-time> | msec-hold <msec-hold> } | msec-hello <msec-hello> { <hold-time> | msec-hold <msec-hold> } } | no timers

Syntax Description

Syntax Description

no

Negate a command or set its defaults

timers

Hello and hold timers

hello-time

Hello interval in seconds

hold-time

Hold time in seconds

msec-hold

Specify hold interval in milliseconds

msec-hold

Hold interval in milliseconds

msec-hello

Specify hello interval in milliseconds

msec-hello

Hello interval in milliseconds

Command Mode
  • /exec/configure/if-eth-any/hsrp_ipv4 /exec/configure/if-eth-any/hsrp_ipv6

timers

timers { <hello-time> { <hold-time> | ms-hold <hold-time-msec> } | ms-hello <hello-time-msec> { <hold-time-sec> | msec-hold <hold-time-msec> } | redirect <redirect-time> <sec-hold-time> } | no timers [ { <hello-time> [ { <hold-time> | ms-hold <hold-time-msec> } ] | ms-hello [ <hello-time-msec> [ <hold-time-sec> | msec-hold <hold-time-msec> ] ] | redirect [ <redirect-time> [ <sec-hold-time> ] ] } ]

Syntax Description

Syntax Description

no

Negate a command or set its defaults

timers

Adjust GLBP timers

hello-time

Specify Hello interval in seconds

hold-time

Specify Hold time in seconds

ms-hold

Specify hold time in milliseconds

hold-time-msec

Hold time in milliseconds

ms-hello

Specify hello interval in milliseconds

hello-time-msec

hello interval in milliseconds

hold-time-sec

Hold time in seconds

msec-hold

Specify hold time in milliseconds

redirect

Specify time-out value for failed forwarders

redirect-time

Interval in seconds to redirect to failed forwarders

sec-hold-time

Time-out interval in seconds for failed forwarders

Command Mode
  • /exec/configure/if-eth-any/glbp

timers

[no] timers { nsf { route-hold <hold-interval> | converge <converge-interval> | signal <signal-interval> } | active-time [ <max-active-time> | disabled ] }

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

timers

Set EIGRP timers

nsf

EIGRP NSF timer

route-hold

EIGRP hold time for routes learned from nsf peer

hold-interval

Seconds

active-time

EIGRP time limit for active state

max-active-time

(Optional) EIGRP active-state time limit in minutes

disabled

(Optional) disable EIGRP time limit for active state

converge

EIGRP time limit for convergence after switchover

converge-interval

Seconds

signal

EIGRP time limit for signaling NSF restart

signal-interval

Seconds

Command Mode
  • /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

timers advertise

[no] timers advertise | timers advertise <val>

Syntax Description

Syntax Description

no

Negate a command or set its defaults

timers

Set the VRRP timers

advertise

Set the advertise timer

val

Advertisement interval in milliseconds

Command Mode
  • /exec/configure/if-eth-any/vrrpv3

timers basic

timers basic <update> <invalid> <holddown> <garbage> | no timers basic [ <update> <invalid> <holddown> <garbage> ]

Syntax Description

Syntax Description

no

Negate a command or set its defaults

timers

RIP set timers

basic

RIP set basic timers

update

RIP update period

invalid

RIP route timeout period

holddown

RIP route holddown period

garbage

RIP route garbage period

Command Mode
  • /exec/configure/router-rip/router-rip-af-common /exec/configure/router-rip/router-rip-vrf-af-common

timers bestpath-defer maximum

[no] timers bestpath-defer <bestpath-defer-time> maximum <bestpath-defer-time-max>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

timers

Configure bgp related timers

bestpath-defer

Configure bestpath defer timer value for batch prefix processing

bestpath-defer-time

Bestpath defer time (mseconds)

maximum

Configure bestpath defer timer maximum value

bestpath-defer-time-max

Maximum bestpath defer time (mseconds)

Command Mode
  • /exec/configure/router-bgp/router-bgp-af

timers bestpath-limit

timers bestpath-limit <bestpath-timeout> [ always ] | no timers bestpath-limit [ <bestpath-timeout> ]

Syntax Description

Syntax Description

no

Negate a command or set its defaults

timers

Configure bgp related timers

bestpath-limit

Configure timeout for first bestpath after restart

bestpath-timeout

Bestpath timeout (seconds)

always

(Optional) Configure update-delay-always option

Command Mode
  • /exec/configure/router-bgp/vrf-cmds

timers bgp

[no] timers bgp <keepalive-interval> <hold-time>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

timers

Configure bgp related timers

bgp

Configure different bgp keepalive and holdtimes

keepalive-interval

Keepalive interval (seconds)

hold-time

Holdtime (seconds)

Command Mode
  • /exec/configure/router-bgp/vrf-cmds

timers lsa-arrival

{ { timers lsa-arrival <interval> } | { no timers lsa-arrival [ <interval> ] } }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

timers

Configure timer related constants

lsa-arrival

Mimimum interval between arrival of a LSA

interval

Interval value (milliseconds)

Command Mode
  • /exec/configure/router-ospf /exec/configure/router-ospf/vrf

timers lsa-arrival

{ { timers lsa-arrival <interval> } | { no timers lsa-arrival [ <interval> ] } }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

timers

Configure timer related constants

lsa-arrival

Mimimum interval between arrival of a LSA

interval

Interval value (millisecond)

Command Mode
  • /exec/configure/router-ospf3 /exec/configure/router-ospf3/vrf

timers lsa-group-pacing

{ { timers lsa-group-pacing <interval> } | { no timers lsa-group-pacing [ <interval> ] } }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

timers

Configure timer related constants

lsa-group-pacing

LSA group refresh/maxage interval

interval

Interval value (seconds)

Command Mode
  • /exec/configure/router-ospf /exec/configure/router-ospf/vrf

timers lsa-group-pacing

{ { timers lsa-group-pacing <interval> } | { no timers lsa-group-pacing [ <interval> ] } }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

timers

Configure timer related constants

lsa-group-pacing

LSA group refresh/maxage interval

interval

Interval value (seconds)

Command Mode
  • /exec/configure/router-ospf3 /exec/configure/router-ospf3/vrf

timers prefix-peer-timeout

timers prefix-peer-timeout <prefixpeer-timeout> | no timers prefix-peer-timeout [ <prefixpeer-timeout> ]

Syntax Description

Syntax Description

no

Negate a command or set its defaults

timers

Configure bgp related timers

prefix-peer-timeout

Configure how long state for a prefix peer is maintained

prefixpeer-timeout

Prefix Peer timeout (seconds)

Command Mode
  • /exec/configure/router-bgp/vrf-cmds

timers prefix-peer-wait

timers prefix-peer-wait <prefixpeer-wait> | no timers prefix-peer-wait [ <prefixpeer-wait> ]

Syntax Description

Syntax Description

no

Negate a command or set its defaults

timers

Configure bgp related timers

prefix-peer-wait

Configure wait timer for a prefix peer

prefixpeer-wait

Prefix peer wait timer (seconds)

Command Mode
  • /exec/configure/router-bgp/vrf-cmds

timers throttle lsa

{ { timers throttle lsa <start-time> <hold-time> <max-time> } | { no timers throttle lsa [ <start-time> <hold-time> <max-time> ] } }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

timers

Configure timer related constants

throttle

Set rate-limiting values (milliseconds)

lsa

Set rate-limiting for LSA generation

start-time

Start interval (milliseconds)

hold-time

Hold interval (milliseconds)

max-time

Max interval (milliseconds)

Command Mode
  • /exec/configure/router-ospf /exec/configure/router-ospf/vrf

timers throttle lsa

{ { timers throttle lsa <start-time> <hold-time> <max-time> } | { no timers throttle lsa [ <start-time> <hold-time> <max-time> ] } }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

timers

Configure timer related constants

throttle

Set rate-limiting values (milliseconds)

lsa

Set rate-limiting for LSA generation

start-time

Start interval (milliseconds)

hold-time

Hold interval (milliseconds)

max-time

Max interval (milliseconds)

Command Mode
  • /exec/configure/router-ospf3 /exec/configure/router-ospf3/vrf

timers throttle spf

{ { timers throttle spf <start-time> <hold-time> <max-time> } | { no timers throttle spf [ <start-time> <hold-time> <max-time> ] } }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

timers

Configure timer related constants

throttle

Configure timer related constants

spf

OSPF SPF timers

start-time

Initial SPF schedule delay in milliseconds

hold-time

Minimum hold time between SPF calculations

max-time

Maximum wait time between SPF calculations

Command Mode
  • /exec/configure/router-ospf /exec/configure/router-ospf/vrf

timers throttle spf

{ { timers throttle spf <start-time> <hold-time> <max-time> } | { no timers throttle spf [ <start-time> <hold-time> <max-time> ] } }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

timers

Configure timer related constants

throttle

Configure timer related constants

spf

OSPF SPF timers

start-time

Initial SPF schedule delay in milliseconds

hold-time

Minimum hold time between SPF calculations

max-time

Maximum wait time between SPF calculations

Command Mode
  • /exec/configure/router-ospf3/router-ospf3-af-ipv6 /exec/configure/router-ospf3/vrf/router-ospf3-af-ipv6

tls

[no] tls

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

tls

One Platform TLS transport configuration mode

Command Mode
  • /exec/configure/onep

tls trust-point local remote

tls trust-point local <tp_local> remote <tp_remote> | no tls trust-point

Syntax Description

Syntax Description

no

Negate a command or set its defaults

tls

OpenFlow switch tls

trust-point

Configure local and remote trustpoints

local

Configure local trustpoint

tp_local

Local trustpoint name

remote

Configure remote trustpoint

tp_remote

Remote trustpoint name

Command Mode
  • /exec/configure/openflow/switch

tls trust-point local remote

tls trust-point local <tp_local> remote <tp_remote> | no tls trust-point

Syntax Description

Syntax Description

no

Negate a command or set its defaults

tls

OpenFlow switch tls

trust-point

Configure local and remote trustpoints

local

Configure local trustpoint

tp_local

Local trustpoint name

remote

Configure remote trustpoint

tp_remote

Remote trustpoint name

Command Mode
  • /exec/configure/openflow/switch/sub-switch

topology holddown sigerr

[no] topology holddown sigerr | topology holddown sigerr <sec>

Syntax Description

Syntax Description

no

Negate a command or set its defaults

topology

Topology Database Configuration

holddown

Topology Database hold down timers

sigerr

Link hold down time for signalling errors

sec

Hold down time in seconds

Command Mode
  • /exec/configure/te

tos

{ { no | default } tos | tos <tos-value> }

Syntax Description

Syntax Description

no

default

Set a command to its defaults

tos

Type of Service

tos-value

Type of Service Value

Command Mode
  • /exec/configure/ip-sla/udp /exec/configure/ip-sla/jitter /exec/configure/ip-sla/tcp /exec/configure/ip-sla/icmpEcho /exec/configure/ip-sla/http

tr

| tr [ -c | -d | -s | -t ] + <SET1> [ <SET2> ]

Syntax Description

Syntax Description

|

Pipe command output to filter

tr

Translate, squeeze, and/or delete characters

-c

(Optional) first complement SET1

-d

(Optional) delete characters in SET1, do not translate

-s

(Optional) replace each sequence of a repeated character from SET1 with single occurrence of that character

-t

(Optional) first truncate SET1 to length of SET2

SET1

character SET1: CHAR1-CHAR2 = all characters from CHAR1 to CHAR2 in ascending order special chars: (tab) (new line) [:alnum:] [:alpha:] [:digit:] [:graph:] (printable, no space) [:print:] (printable, with space) [:lower:] [:upper:] [:space:] (tab or space)

SET2

(Optional) character SET2 (for translation length is extended to length of SET1 by repeating last char, excess chars are ignored): format same as SET1 [CHAR*] = copies of CHAR until length of SET1 [CHAR*REPEAT] = REPEAT copies of CHAR

Command Mode
  • /output

trace buffer size

trace buffer { error | warning | event } size <size>

Syntax Description

Syntax Description

trace

MPLS static trace

buffer

MPLS static trace buffer

error

MPLS static error trace

warning

MPLS static warning trace

event

MPLS static event trace

size

trace buffer size in Kbytes

size

trace buffer size in Kbytes

Command Mode
  • /exec/configure/mpls_static

traceroute

traceroute { <host> | <hostname> } [ port <portnumber> ] [ [ source-interface <src-intf> ] | [ [ source { <host> | <hostname> | <interface> } ] [ vrf { <vrf-name> | <vrf-known-name> } ] ] ]

Syntax Description

Syntax Description

traceroute

Traceroute

host

IP address of remote system

hostname

Hostname of remote system

port

(Optional) Set destination port

portnumber

(Optional) Enter destination port number

source

(Optional) Set source address in IP header

interface

(Optional) Interface

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

source-interface

(Optional) Select source interface

src-intf

(Optional) Specify interface

Command Mode
  • /exec

traceroute6

traceroute6 { <host> | <hostname> } [ [ [ source { <host> | <hostname> | <interface> } ] [ vrf { <vrf-name> | <vrf-known-name> } ] ] | [ source-interface <src-intf> ] ]

Syntax Description

Syntax Description

traceroute6

Traceroute6

hostname

Hostname of remote system

source

(Optional) Set source address in IPv6 header

interface

(Optional) Interface

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

source-interface

(Optional) Select source interface

src-intf

(Optional) Specify interface

Command Mode
  • /exec

traceroute mpls

traceroute mpls [ { nil-fec labels <comma-separated-labels> } { output { ointerface <tx-interface> } nexthop <nexthop-ip-addr> } [ { timeout <seconds> } | { destination <addr-start> [ <addr-end> [ <addr-incr-mask> | <addr-incr> ] ] } | { source <addr> } | { exp <exp-value> } | { ttl <ttl-max> } | { verbose } | { reply { { mode { <reply-mode-ipv4> | router-alert | no-reply } } | { dscp { <dscp-bits> | af11 | af12 | af13 | af21 | af22 | af23 | af31 | af32 | af33 | af41 | af42 | af43 | cs1 | cs2 | cs3 | cs4 | cs5 | cs6 | cs7 | default | ef } } } } + | { force-explicit-null } | { flags { fec } } ] + ]

Syntax Description

Syntax Description

traceroute

need

mpls

Test

nil-fec

(Optional) Target

labels

(Optional) A

comma-separated-labels

(Optional) A

timeout

(Optional) Timeout

seconds

(Optional) Timeout

destination

(Optional) Destination

addr-start

(Optional) Destination

addr-end

(Optional) Destination

addr-incr-mask

(Optional) Destination

addr-incr

(Optional) Destination

source

(Optional) Source

addr

(Optional) Source

exp

(Optional) EXP

exp-value

(Optional) EXP

ttl

(Optional) Maximum

ttl-max

(Optional) TTL

verbose

(Optional) Verbose

reply

(Optional) Reply

mode

(Optional) Reply

reply-mode-ipv4

(Optional) Send

router-alert

(Optional) Send

no-reply

(Optional) Send

dscp

(Optional) DSCP

dscp-bits

(Optional) Differentiated

af11

(Optional) Match

af12

(Optional) Match

af13

(Optional) Match

af21

(Optional) Match

af22

(Optional) Match

af23

(Optional) Match

af31

(Optional) Match

af32

(Optional) Match

af33

(Optional) Match

af41

(Optional) Match

af42

(Optional) Match

af43

(Optional) Match

cs1

(Optional) Match

cs2

(Optional) Match

cs3

(Optional) Match

cs4

(Optional) Match

cs5

(Optional) Match

cs6

(Optional) Match

cs7

(Optional) Match

default

(Optional) Match

ef

(Optional) Match

force-explicit-null

(Optional) Force

output

(Optional) Output

ointerface

(Optional) Echo

tx-interface

(Optional) Echo

nexthop

(Optional) Next

nexthop-ip-addr

(Optional) Next

flags

(Optional) Flag

fec

(Optional) Request

Command Mode
  • /exec

traceroute nve

traceroute nve { { { { ip { <numeric10> | <numeric11> | unknown } } [ vrf { <vrf-name> | <vrf-known-name> } | { <dot1qid1> } ] } | mac <dmac> <dot1qid> <intfid> } [ profile <pid> ] [ payload { [ mac-addr <dstmac> <smac> ] [ dot1q <dot1q-id> ] [ ip <dstip> <srcip> | ipv6 <dstipv6> <srcipv6> ] [ port <sport> <dport> ] [ proto <proto-id> ] } payload-end ] [ source { <numeric1> | <numeric2> } |

Syntax Description

Syntax Description

traceroute

Test

nve

network virtualization edge

numeric10

Ipv4 address of remote host / VTEP

unknown

Peer vtep ip is unknown, will be derived from payload

intfid

Name of the interface for ngoam traceroute on which dot1q is configured

profile

(Optional) NGOAM profile to use

pid

(Optional) NGOAM profile id

mac

Mac

dmac

Destination mac address

dot1qid

Encapsulation dot1q/bd on which the mac is learnt

dot1qid1

(Optional) Encapsulation dot1q/bd on which the mac is learnt

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

source

(Optional) Source

numeric1

(Optional) IP

payload

(Optional) Enter customer payload

mac-addr

(Optional) Mac

dstmac

(Optional) Destination mac address

smac

(Optional) Source mac address

dot1q

(Optional) Encapsulation dot1q/bd

dot1q-id

(Optional) Encapsulation dot1q/bd on which the mac is learnt

ip

ip address

dstip

(Optional) Destination ipv4 address

srcip

(Optional) source ipv4 address

ipv6

(Optional) ipv6 address

port

(Optional) L4 port info

sport

(Optional) Source port

dport

(Optional) Destination port

proto

(Optional) Protocol

proto-id

(Optional) IANA Protocol id

payload-end

(Optional) End payload info input

Command Mode
  • /exec

track-adjacency-nexthop

[no] track-adjacency-nexthop

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

track-adjacency-nexthop

Track next-hop for same-site Overlay adjacencies

Command Mode
  • /exec/configure/otv-isis

track

track <object-id>

Syntax Description

Syntax Description

track

Object tracking deletion command

object-id

Tracked Object

Command Mode
  • /exec/configure

track

[no] track <object-id> [ force ]

Syntax Description

Syntax Description

no

Negate a command or set its defaults

track

Object tracking deletion command

object-id

Tracked Object

force

(Optional) Completely remove the object

Command Mode
  • /exec/configure

track

track <object-id> { { ip_v4 route <route-prefix> reachability [ hmm ] } | { ip_v6 routev6 <v6route-prefix> reachability [ hmm ] } }

Syntax Description

Syntax Description

track

Object tracking configuration command

object-id

Tracked Object

ip_v4

IPv4 protocol

route

IPv4 route

route-prefix

Specify ipv4 route prefix

ip_v6

IPv6 protocol

routev6

IPv6 route

reachability

Route reachability state

hmm

(Optional) Track routes owned by hmm

Command Mode
  • /exec/configure

track

track <object-id> { ip_v4 sla <sla-id> [ sla_reachability | sla_state ] }

Syntax Description

Syntax Description

track

Object tracking configuration command

object-id

Tracked Object

ip_v4

IPv4 protocol

sla

IP Service Level Agreement

sla-id

Entry number

sla_reachability

(Optional) Reachability

sla_state

(Optional) return code state

Command Mode
  • /exec/configure

track

track <object-id> { list { boolean <bool-val> } }

Syntax Description

Syntax Description

track

Object tracking configuration command

object-id

Tracked Object

list

Object tracking list

boolean

boolean list type

bool-val

boolean list type

Command Mode
  • /exec/configure

track

track <object-id> { list threshold <weight-val> }

Syntax Description

Syntax Description

track

Object tracking configuration command

object-id

Tracked Object

list

Object tracking list

threshold

threshold type

weight-val

threshold weight type

Command Mode
  • /exec/configure

track

track <object-id> { list threshold <percentage-val> }

Syntax Description

Syntax Description

track

Object tracking configuration command

object-id

Tracked Object

list

Object tracking list

threshold

threshold type

percentage-val

threshold percentage type

Command Mode
  • /exec/configure

track

[no] track <object-number> [ decrement <value> ]

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

track

Associates track object to HSRP group

object-number

Set the object number to the group

decrement

(Optional) Decrements when tracked object goes down

value

(Optional) Set the value to decrement from priority

Command Mode
  • /exec/configure/if-eth-any/hsrp_ipv4 /exec/configure/if-eth-any/hsrp_ipv6

track

track <object-number> | no track

Syntax Description

Syntax Description

no

Negate a command or set its defaults

track

Associates track object to Anycast Bundle

object-number

Set the object number

Command Mode
  • /exec/configure/anycast

track

track <track-obj> | no track <track-obj>

Syntax Description

Syntax Description

no

Negate a command or set its defaults

track

Tracking object to suspend vPC if object goes down

track-obj

Tracked object

Command Mode
  • /exec/configure/vpc-domain

track data

[no] track data <loc-uri>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

data

User files to preserve

track

Track file uri

loc-uri

Enter file uri

Command Mode
  • /exec/configure/personality

track interface

track <object-id> interface <ifnum> { line-protocol | ipv4 routing | ipv6 routingv6 }

Syntax Description

Syntax Description

track

Object tracking configuration commands

object-id

Tracked Object

interface

Interface to track

ifnum

Interface type and number

line-protocol

Track interface line-protocol

ipv4

IPv4 parameters

routing

Track interface ipv4 routing

ipv6

IPv6 parameters

routingv6

Track interface ipv6 routing

Command Mode
  • /exec/configure

track interface priority

{ { track { { interface <intf_num> priority <priority_value> } | { <object-num> [ decrement <decrement-value> ] } } } | { no track [ { { interface <intf_num> priority <priority_value> } | { <object-num> [ decrement <decrement-value> ] } } ] } }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

track

Track the availability of another interface/object

interface

Select the tracked interface(Native tracking)

intf_num

priority

Vr priority used when the tracked interface is down

priority_value

object-num

Set the object number to the group(Object tracking)

decrement

(Optional) Decrements priority when tracked object goes down

decrement-value

(Optional) Set the value to decrement from priority

Command Mode
  • /exec/configure/if-eth-any/vrrp

track running-state track startup-state

[no] track running-state | [ no ] track startup-state

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

track

Track file uri

running-state

active patches, third-party RPMs, and running-config

startup-state

committed patches, third-party RPMs, and startup-config

Command Mode
  • /exec/configure/personality

traffic-class

{ { no | default } traffic-class | traffic-class <traffic-class> }

Syntax Description

Syntax Description

no

default

Set a command to its defaults

traffic-class

Traffic Class

traffic-class

Traffic Class Value

Command Mode
  • /exec/configure/ip-sla/udp /exec/configure/ip-sla/jitter /exec/configure/ip-sla/tcp /exec/configure/ip-sla/icmpEcho /exec/configure/ip-sla/http

traffic-share

[no] traffic-share { balanced | { min across-interfaces } }

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

traffic-share

How to compute traffic share over alternate paths

balanced

Share inversely proportional to metric

min

All traffic shared among min metric paths

across-interfaces

Use different interfaces for equal-cost paths

Command Mode
  • /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

transmit-delay

{ { transmit-delay <delay> } | { no transmit-delay [ <delay> ] } }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

transmit-delay

Packet transmission delay

delay

(seconds)

Command Mode
  • /exec/configure/router-ospf/router-ospf-vlink /exec/configure/router-ospf/vrf/router-ospf-vlink

transmit-delay

{ { transmit-delay <delay> } | { no transmit-delay [ <delay> ] } }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

transmit-delay

Packet transmission delay

delay

(seconds)

Command Mode
  • /exec/configure/router-ospf/vrf/router-ospf-slink

transmit-delay

{ { transmit-delay <delay> } | { no transmit-delay [ <delay> ] } }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

transmit-delay

Packet transmission delay

delay

(seconds)

Command Mode
  • /exec/configure/router-ospf3/router-ospf3-vlink /exec/configure/router-ospf3/vrf/router-ospf3-vlink

transport connection-mode passive

[ no | default ] transport connection-mode passive

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

transport

BGP transport connection

connection-mode

Specify type of connection

passive

Allow passive connection setup only

Command Mode
  • /exec/configure/router-bgp/router-bgp-template-neighbor /exec/configure/router-bgp/router-bgp-neighbor-stmp /exec/configure/router-bgp/router-bgp-neighbor /exec/configure/router-bgp/router-bgp-vrf-neighbor

transport email

{ transport email { from <s0> | reply-to <s1> | smtp-server { <hostipv4> | <hostipv6> | <hostname> } [ port <i1> ] [ use-vrf <s2> ] } | no transport email smtp-server | no transport email { from | reply-to } }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

transport

Configure transport related configuration

email

Configure email transport related configuration

from

Configure from email address

s0

Provide from email address, example: SJ-9500-1@xyz.com

reply-to

Configure replyto email address

s1

Provide reply-to email address, example: admin@xyz.com

smtp-server

Configure SMTP server address

hostname

SMTP server(DNS name or IPv4 or IPv6 address)

hostipv4

IPV4 address of SMTP server

port

(Optional) Configure SMTP server port (default:25)

i1

(Optional) SMTP server port

use-vrf

(Optional) Configure vrf name

s2

(Optional) vrf name

Command Mode
  • /exec/configure/callhome

transport email mail-server

{ [ no ] transport email mail-server { <hostipv4> | <hostipv6> | <hostname> } [ port <i1> ] [ priority <i2> ] [ use-vrf <s2> ] }

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

transport

Configure transport related configuration

email

Configure email transport related configuration

mail-server

Configure SMTP server address (for supporting multiple SMTP-servers)

hostname

SMTP server(DNS name or IPv4 or IPv6 address)

hostipv4

IPV4 address of SMTP server

port

(Optional) Configure SMTP server port (default:25)

i1

(Optional) SMTP server port

use-vrf

(Optional) Configure vrf name

s2

(Optional) vrf name

priority

(Optional) Configure SMTP server priority (1-100) (default:50)

i2

(Optional) SMTP server priority

Command Mode
  • /exec/configure/callhome

transport http proxy enable

[no] transport http proxy enable

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

transport

Configure transport related configuration

http

Configure transport option for http urls

proxy

Configure proxy for http transport

enable

Enable the usage of proxy server for messages sent over http(s)

Command Mode
  • /exec/configure/callhome

transport http proxy server

{ transport http proxy server { <hostname> } [ port <i1> ] } | { no transport http proxy server }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

transport

Configure transport related configuration

http

Configure transport option for http urls

proxy

Configure proxy for http transport

server

Configure proxy server address and port

hostname

Proxy server name or IP address(DNS name or IPv4 or IPv6 address)

port

(Optional) Configure Proxy server port (default:8080)

i1

(Optional) Proxy server port

Command Mode
  • /exec/configure/callhome

transport http use-vrf

transport http use-vrf <s2> | no transport http use-vrf

Syntax Description

Syntax Description

no

Negate a command or set its defaults

transport

Configure transport related configuration

http

Configure transport option for http urls

use-vrf

Configure vrf name

s2

vrf name

Command Mode
  • /exec/configure/callhome

transport type tcp

[no] transport type { { tcp [ port <tportnum> ] [ access-class <aclname> ] } | { tls [ { disable-remotecert-validation [ { localcert <localtp> [ { port <tportnum> [ access-class <aclname> ] } | { access-class <aclname> [ port <tportnum> ] } ] } | { port <tportnum> [ { localcert <localtp> [ access-class <aclname> ] } | { access-class <aclname> [ localcert <localtp> ] } ] } | { access-class <aclname> [ { localcert <localtp> [ port <tportnum> ] } | { port <tportnum> [ localcert <localtp> ] } ] } ] } | { localcert <localtp> [ { disable-remotecert-validation [ { port <tportnum> [ access-class <aclname> ] } | { access-class <aclname> [ port <tportnum> ] } ] } | { port <tportnum> [ { disable-remotecert-validation [ access-class <aclname> ] } | { access-class <aclname> [ disable-remotecert-validation ] } ] } | { access-class <aclname> [ { disable-remotecert-validation [ port <tportnum> ] } | { port <tportnum> [ disable-remotecert-validation ] } ] } ] } | { port <tportnum> [ { disable-remotecert-validation [ { localcert <localtp> [ access-class <aclname> ] } | { access-class <aclname> [ localcert <localtp> ] } ] } | { localcert <localtp> [ { disable-remotecert-validation [ access-class <aclname> ] } | { access-class <aclname> [ disable-remotecert-validation ] } ] } | { access-class <aclname> [ { disable-remotecert-validation [ localcert <localtp> ] } | { localcert <localtp> [ disable-remotecert-validation ] } ] } ] } | { access-class <aclname> [ { disable-remotecert-validation [ { localcert <localtp> [ port <tportnum> ] } | { port <tportnum> [ localcert <localtp> ] } ] } | { localcert <localtp> [ { disable-remotecert-validation [ port <tportnum> ] } | { port <tportnum> [ disable-remotecert-validation ] } ] } | { port <tportnum> [ { disable-remotecert-validation [ localcert <localtp> ] } | { localcert <localtp> [ disable-remotecert-validation ] } ] } ] } | { remotecert <remotetp> [ { localcert <localtp> [ { port <tportnum> [ access-class <aclname> ] } | { access-class <aclname> [ port <tportnum> ] } ] } | { port <tportnum> [ { localcert <localtp> [ access-class <aclname> ] } | { access-class <aclname> [ localcert <localtp> ] } ] } | { access-class <aclname> [ { localcert <localtp> [ port <tportnum> ] } | { port <tportnum> [ localcert <localtp> ] } ] } ] } | { localcert <localtp> [ { remotecert <remotetp> [ { port <tportnum> [ access-class <aclname> ] } | { access-class <aclname> [ port <tportnum> ] } ] } | { port <tportnum> [ { remotecert <remotetp> [ access-class <aclname> ] } | { access-class <aclname> [ remotecert <remotetp> ] } ] } | { access-class <aclname> [ { remotecert <remotetp> [ port <tportnum> ] } | { port <tportnum> [ remotecert <remotetp> ] } ] } ] } | { port <tportnum> [ { remotecert <remotetp> [ { localcert <localtp> [ access-class <aclname> ] } | { access-class <aclname> [ localcert <localtp> ] } ] } | { localcert <localtp> [ { remotecert <remotetp> [ access-class <aclname> ] } | { access-class <aclname> [ remotecert <remotetp> ] } ] } | { access-class <aclname> [ { remotecert <remotetp> [ localcert <localtp> ] } | { localcert <localtp> [ remotecert <remotetp> ] } ] } ] } | { access-class <aclname> [ { remotecert <remotetp> [ { localcert <localtp> [ port <tportnum> ] } | { port <tportnum> [ localcert <localtp> ] } ] } | { localcert <localtp> [ { remotecert <remotetp> [ port <tportnum> ] } | { port <tportnum> [ remotecert <remotetp> ] } ] } | { port <tportnum> [ { remotecert <remotetp> [ localcert <localtp> ] } | { localcert <localtp> [ remotecert <remotetp> ] } ] } ] } ] } }

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

transport

Transport command

type

Session transport

tcp

TCP transport

tls

TLS transport

disable-remotecert-validation

(Optional) Disable Remote Certificate Validation

localcert

(Optional) Local Certificate

localtp

(Optional) Local Trust Point Name

remotecert

(Optional) Remote Certificate Validation

remotetp

(Optional) Remote Trust Point Name

port

(Optional) Port number

tportnum

(Optional) Number

access-class

(Optional) Filter incoming connections based on IP access list

aclname

(Optional) IP access list name

Command Mode
  • /exec/configure/onep

transport udp

{ [ no ] transport udp <portnumber> | no transport udp }

Syntax Description

Syntax Description

transport

Transport Destination Port

udp

Destination UDP Port

portnumber

Destination UDP Port

Command Mode
  • /exec/configure/nfm-exporter

trigger init ingress in-select 3 out-select 0

trigger init { ingress | egress } in-select 3 out-select 0

Syntax Description

Syntax Description

trigger

Define A Trigger

init

Initialize Trigger

ingress

Ingress Fields

egress

Egress Fields

in-select

in-select

out-select

out-select

0

pktrw

3

outerl2-outerl3-outerl4

Command Mode
  • /exec/elamns

trigger init ingress in-select 3 out-select 03

trigger init { ingress | egress } in-select 3 out-select 03

Syntax Description

Syntax Description

trigger

Define A Trigger

init

Initialize Trigger

ingress

Ingress Fields

egress

Egress Fields

in-select

in-select

out-select

out-select

03

pkt_lsb

3

outerl2-outerl3-outerl4

Command Mode
  • /exec/elamns

trigger init ingress in-select 3 out-select 0 reverse

trigger init { ingress | egress } in-select 3 out-select 0 reverse

Syntax Description

Syntax Description

trigger

Define A Trigger

init

Initialize Trigger

ingress

Ingress Fields

egress

Egress Fields

in-select

in-select

out-select

out-select

0

pktrw

3

outerl2-outerl3-outerl4

reverse

Program reverse ELAM

Command Mode
  • /exec/elamns

trigger init ingress in-select 3 out-select 1

trigger init { ingress | egress } in-select 3 out-select 1

Syntax Description

Syntax Description

trigger

Define A Trigger

init

Initialize Trigger

ingress

Ingress Fields

egress

Egress Fields

in-select

in-select

out-select

out-select

1

pkt_fifo_lsb

3

outerl2-outerl3-outerl4

Command Mode
  • /exec/elamns

trigger init ingress in-select 3 out-select 2

trigger init { ingress | egress } in-select 3 out-select 2

Syntax Description

Syntax Description

trigger

Define A Trigger

init

Initialize Trigger

ingress

Ingress Fields

egress

Egress Fields

in-select

in-select

out-select

out-select

2

pkt_fifo_msb

3

outerl2-outerl3-outerl4

Command Mode
  • /exec/elamns

trigger init ingress in-select 3 out-select 4

trigger init { ingress | egress } in-select 3 out-select 4

Syntax Description

Syntax Description

trigger

Define A Trigger

init

Initialize Trigger

ingress

Ingress Fields

egress

Egress Fields

in-select

in-select

out-select

out-select

4

pkt_msb

3

outerl2-outerl3-outerl4

Command Mode
  • /exec/elamns

trigger init ingress in-select 3 out-select 5

trigger init { ingress | egress } in-select 3 out-select 5

Syntax Description

Syntax Description

trigger

Define A Trigger

init

Initialize Trigger

ingress

Ingress Fields

egress

Egress Fields

in-select

in-select

out-select

out-select

5

sideband

3

outerl2-outerl3-outerl4

Command Mode
  • /exec/elamns

trigger init ingress in-select 3 out-select 5 reverse

trigger init { ingress | egress } in-select 3 out-select 5 reverse

Syntax Description

Syntax Description

trigger

Define A Trigger

init

Initialize Trigger

ingress

Ingress Fields

egress

Egress Fields

in-select

in-select

out-select

out-select

5

sideband

3

outerl2-outerl3-outerl4

reverse

Program reverse ELAM

Command Mode
  • /exec/elamns

trigger init ingress in-select 4 out-select 0

trigger init { ingress | egress } in-select 4 out-select 0

Syntax Description

Syntax Description

trigger

Define A Trigger

init

Initialize Trigger

ingress

Ingress Fields

egress

Egress Fields

in-select

in-select

out-select

out-select

0

pktrw

4

innerl2-innerl3-innerl4

Command Mode
  • /exec/elamns

trigger init ingress in-select 4 out-select 04

trigger init { ingress | egress } in-select 4 out-select 04

Syntax Description

Syntax Description

trigger

Define A Trigger

init

Initialize Trigger

ingress

Ingress Fields

egress

Egress Fields

in-select

in-select

out-select

out-select

04

pkt_msb

4

innerl2-innerl3-innerl4

Command Mode
  • /exec/elamns

trigger init ingress in-select 4 out-select 0 reverse

trigger init { ingress | egress } in-select 4 out-select 0 reverse

Syntax Description

Syntax Description

trigger

Define A Trigger

init

Initialize Trigger

ingress

Ingress Fields

egress

Egress Fields

in-select

in-select

out-select

out-select

0

pktrw

4

innerl2-innerl3-innerl4

reverse

Program reverse ELAM

Command Mode
  • /exec/elamns

trigger init ingress in-select 4 out-select 1

trigger init { ingress | egress } in-select 4 out-select