U Commands

udf

udf <udf_name> { packet-start | { header { outer | inner } { l3 | l4 } } } <offset> <length> | no udf <udf_name> [ { packet-start | { header { outer | inner } { l3 | l4 } } } <offset> <length> ]

Syntax Description

Syntax Description

no

Negate the command

udf

Define the User Defined Field (UDF)

udf_name

Name of the UDF to configure

packet-start

Offset base from packet-start

header

Offset base configuration

outer

Offset base: from outer header

inner

Offset base: from inner header

l3

Offset base: from l3 header

l4

Offset base: from l4 header

offset

Enter Offset in bytes for UDF (from offset base)

length

Enter Length in bytes for UDF (from offset)

Command Mode
  • /exec/configure

udld aggressive

udld aggressive

Syntax Description

Syntax Description

udld

UDLD protocol

aggressive

Enable UDLD aggressive mode on all fiber optic ports

Command Mode
  • /exec/configure

udld aggressive

[no] udld aggressive

Syntax Description

Syntax Description

no

Negate a command or set its defaults

udld

UDLD protocol

aggressive

Enable UDLD aggressive mode on all fiber optic ports

Command Mode
  • /exec/configure

udld aggressive

udld aggressive

Syntax Description

Syntax Description

udld

UDLD protocol

aggressive

Enable UDLD aggressive mode for interface(s)

Command Mode
  • /exec/configure/if-ethernet-all /exec/configure/if-eth-base

udld aggressive

[no] udld aggressive

Syntax Description

Syntax Description

no

Negate a command or set its defaults

udld

UDLD protocol

aggressive

Enable UDLD aggressive mode for interface(s)

Command Mode
  • /exec/configure/if-ethernet-all /exec/configure/if-eth-base

udld continue-on-err

[no] udld continue-on-err

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

udld

UDLD protocol

continue-on-err

Force UDLD continue without disabling the port

Command Mode
  • /exec

udld disable

udld disable

Syntax Description

Syntax Description

udld

UDLD protocol

disable

Disable UDLD for fiber interface(s)

Command Mode
  • /exec/configure/if-ethernet-all /exec/configure/if-eth-base

udld disable

[no] udld disable

Syntax Description

Syntax Description

no

Negate a command or set its defaults

udld

UDLD protocol

disable

Disable UDLD for fiber interface(s)

Command Mode
  • /exec/configure/if-ethernet-all /exec/configure/if-eth-base

udld enable

udld enable

Syntax Description

Syntax Description

udld

UDLD protocol

enable

Enable UDLD for non-fiber interface(s)

Command Mode
  • /exec/configure/if-ethernet-all /exec/configure/if-eth-base

udld enable

[no] udld enable

Syntax Description

Syntax Description

no

Negate a command or set its defaults

udld

UDLD protocol

enable

Enable UDLD for non-fiber interface(s)

Command Mode
  • /exec/configure/if-ethernet-all /exec/configure/if-eth-base

udld message-time

udld message-time <i0> | no udld message-time

Syntax Description

Syntax Description

no

Negate a command or set its defaults

udld

UDLD protocol

message-time

Setting the time in seconds between UDLD probe messages

i0

Enter the message timer value [default = 15]

Command Mode
  • /exec/configure

udld reset

udld reset

Syntax Description

Syntax Description

udld

UDLD protocol

reset

Reset all ports shut down by UDLD

Command Mode
  • /exec/configure

udp-echo

[no] udp-echo { <hostname> | <ip-address> } <port> { [ control { disable | enable } ] [ source-ip { <source-ip-hostname> | <source-ip-address> } ] [ source-port <source-port-number> ] } +

Syntax Description

Syntax Description

no

(Optional)

control

(Optional) enable

source-ip-address

(Optional) <source-port-number>

udp-echo

UDP Echo Operation

hostname

Destination hostname, broadcast disallowed

ip-address

Destination IP address, broadcast disallowed

port

Port Number (Recommended port range between 1025-65534)

enable

(Optional) Enable control packets exchange (default)

disable

(Optional) Disable control packets exchange

source-ip

(Optional) Source address

source-ip-hostname

(Optional) source IP hostname, broadcast disallowed

source-port

(Optional) Source Port

source-port-number

(Optional) Port Number (Recommended port range between 1025-65534)

Command Mode
  • /exec/configure/ip-sla

udp-jitter

[no] udp-jitter { <hostname> | <ip-address> } <dest-port> { { [ codec { g711alaw | g711ulaw | g729a } { [ advantage-factor <advantage-num> ] [ codec-interval <codec-int> ] [ codec-numpackets <codec-numpack> ] [ codec-size <codec-bytes> ] } + ] [ control { disable | enable } ] [ source-ip { <source-ip-hostname> | <source-ip-address> } ] [ source-port <src-port> ] } + | { [ interval <packet-interval> ] [ num-packets <num-packets> ] [ control { disable | enable } ] [ source-ip { <source-ip-hostname> | <source-ip-address> } ] [ source-port <src-port> ] } + }

Syntax Description

Syntax Description

no

(Optional)

codec

(Optional) g711alaw

codec-numpackets

(Optional) codec-size

source-port

(Optional) interval

codec-numpack

(Optional) <codec-bytes>

source-ip-hostname

(Optional) <source-ip-address>

udp-jitter

UDP Jitter Operation

hostname

Destination hostname, broadcast disallowed

ip-address

Destination IP address, broadcast disallowed

dest-port

Port Number (Recommended port range between 1025-65534)

g711alaw

(Optional) G.711 A Law 64000 bps

g711ulaw

(Optional) G.711 U Law 64000 bps

g729a

(Optional) G.729 8000 bps

advantage-factor

(Optional) Advantage Factor

codec-interval

(Optional) Inter Packet Interval

codec-size

(Optional) Number of bytes in payload

advantage-num

(Optional) Advantage Factor

codec-int

(Optional) Delay

codec-bytes

(Optional) Number of bytes in payload

packet-interval

(Optional) Delay (default 20)

num-packets

(Optional) Number of Packets (default 10)

interval

(Optional) Inter Packet Interval

num-packets

(Optional) Number of Packets to be transmitted

control

(Optional) Enable or disable control packets

enable

(Optional) Enable control packets exchange (default)

disable

(Optional) Disable control packets exchange

source-ip

(Optional) Source address

source-ip-hostname

(Optional) source IP hostname, broadcast disallowed

source-ip-address

(Optional) source IP address, broadcast disallowed

source-port

(Optional) Source Port

src-port

(Optional) Port Number (Recommended port range between 1025-65534)

Command Mode
  • /exec/configure/ip-sla

undebug all

undebug all

Syntax Description

Syntax Description

undebug

Disable Debugging functions (See also debug)

all

Disable all debugging

Command Mode
  • /exec

undebug l2rib

undebug l2rib

Syntax Description

Syntax Description

undebug

Disable Debugging functions (See also debug)

l2rib

L2RIB debug commands

Command Mode
  • /exec

uniq

| uniq [ -c | -d | -f <nb-of-fields> | -s <nb-of-chars> | -u | -w <nb-chars-to-compare> | -i ] +

Syntax Description

Syntax Description

|

Pipe command output to filter

uniq

Discard all but one of successive identical lines

-c

(Optional) prefix lines by the number of occurrences

-d

(Optional) only print duplicate lines

-f

(Optional) avoid comparing the first N fields

-s

(Optional) avoid comparing the first N characters

-u

(Optional) only print unique lines

-w

(Optional) compare no more than N characters in lines

-i

(Optional) ignore differences in case when comparing

nb-of-fields

(Optional) number of initial fields to ignore

nb-of-chars

(Optional) number of initial chars to ignore

nb-chars-to-compare

(Optional) max number of chars to compare

Command Mode
  • /output

unmount slot0

unmount slot0:

Syntax Description

Syntax Description

unmount

unmount expansion flash or USB storage

slot0:

Unmount expansion flash

Command Mode
  • /exec

unsuppress-map

unsuppress-map <unsupp-rmap-name> | { no | default } unsuppress-map [ <unsupp-rmap-name> ]

Syntax Description

Syntax Description

no

Negate a command or set its defaults

default

Inherit values from a peer template

unsuppress-map

Route-map to selectively unsuppress suppressed routes

unsupp-rmap-name

Route-map name

Command Mode
  • /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv4 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv6

untagged cos

untagged cos <ucos-value> | no untagged cos

Syntax Description

Syntax Description

no

Negate a command or set its defaults

untagged

default to use for untagged packets on interface

cos

IEEE 802.1Q class of service for QoS classification

ucos-value

COS value

Command Mode
  • /exec/configure/if-set-qos

update-rib-always

[no] update-rib-always

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

update-rib-always

Force updates to rib

Command Mode
  • /exec/configure/otv-isis

update-source

update-source <interface> | no update-source

Syntax Description

Syntax Description

no

Negate a command or set its defaults

update-source

Specify source of BMP session and messages

interface

Interface name

Command Mode
  • /exec/configure/router-bgp/router-bgp-bmp-server

update-source

update-source <interface> | { no | default } update-source [ <interface> ]

Syntax Description

Syntax Description

no

Negate a command or set its defaults

default

Inherit values from a peer template

update-source

Specify source of BGP session and updates

interface

Interface name

Command Mode
  • /exec/configure/router-bgp/router-bgp-neighbor-sess

update adjacency

update adjacency <all>

Syntax Description

Syntax Description

update

Update

adjacency

Display adjacency table

all

Update all adjcencies

Command Mode
  • /exec

update ip route

update ip { route | rnh } [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] <all>

Syntax Description

Syntax Description

update

Update

ip

IPv4

route

Update routing information

rnh

Update only RNH information

vrf

(Optional) VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

all

Update all routes

Command Mode
  • /exec

update ipv6 route

update ipv6 route [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] <all>

Syntax Description

Syntax Description

update

Update

ipv6

IPv6

route

Update routing information

vrf

(Optional) VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

all

Update all routes

Command Mode
  • /exec

update license

update license <uri0> { <license-file> [ force ] | <s0> }

Syntax Description

Syntax Description

update

Update license

license

Update a license file

uri0

Specify URL for the new license file

license-file

License file to be updated

force

(Optional) Force update license (don't prompt)

s0

License file to be updated

Command Mode
  • /exec

urib debugs-dump-to-file

urib debugs-dump-to-file

Syntax Description

Syntax Description

urib

Unicast Routing Information Base

debugs-dump-to-file

Dump all urib debugs to a file

Command Mode
  • /exec

use-vrf

[no] use-vrf { management | default | <vrf_name> }

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

use-vrf

vrf to be used to contact servers in this group

management

management vrf

default

default vrf

vrf_name

name of the vrf

Command Mode
  • /exec/configure/tacacs+

use-vrf

[no] use-vrf { <vrf-name> | <vrf-known-name> }

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

use-vrf

Display per-VRF information

vrf-name

VRF name

vrf-known-name

Known VRF name

Command Mode
  • /exec/configure/ldap

use-vrf

[no] use-vrf { management | default | <vrf_name> }

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

use-vrf

vrf to be used to contact servers in this group

management

management vrf

default

default vrf

vrf_name

name of the vrf

Command Mode
  • /exec/configure/radius

user-jid password

[no] user-jid <jid> password [ 0 <clear> | 7 <encrypted> | <password> ]

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

user-jid

User Jabber ID

jid

Enter user Jabber ID

password

Password

0

(Optional) Password that follows should be in clear text

clear

(Optional) Password in clear text

7

(Optional) Password that follows should be in encrypted text

encrypted

(Optional) Encrypted password

password

(Optional) Enter password in clear text

Command Mode
  • /exec/configure/fabric-db/server-xmpp

user max-logins

user max-logins <limit>

Syntax Description

Syntax Description

user

Configure system-wide user settings

max-logins

maximum simultaneous logins

limit

login session maximum

Command Mode
  • /exec/configure

user max-logins

[no] user max-logins [ <limit> ]

Syntax Description

Syntax Description

no

Negate a command or set its defaults

user

Configure system-wide user settings

max-logins

maximum simultaneous logins

limit

(Optional) login session maximum

Command Mode
  • /exec/configure

username

{ username <s0> [ password { 0 <s2> | 5 <s3> | <s4> } ] [ expire <s5> [ past ] ] [ priv-lvl <p> ] } | { username <s0> [ password { 0 <s2> | 5 <s3> | <s4> } ] [ priv-lvl <p> ] [ expire <s5> [ past ] ] } | { username <s0> [ expire <s5> [ past ] ] [ password { 0 <s2> | 5 <s3> | <s4> } ] [ priv-lvl <p> ] } | { username <s0> [ expire <s5> [ past ] ] [ priv-lvl <p> ] [ password { 0 <s2> | 5 <s3> | <s4> } ] } | { username <s0> [ priv-lvl <p> ] [ password { 0 <s2> | 5 <s3> | <s4> } ] [ expire <s5> [ past ] ] } | { username <s0> [ priv-lvl <p> ] [ expire <s5> [ past ] ] [ password { 0 <s2> | 5 <s3> | <s4> } ] } | { no username <s7> [ priv-lvl <p> ] }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

username

Configure user information.

s0

user name

password

(Optional) Password for the user

0

(Optional) Indicates that the password that follows should be in clear text

s2

(Optional) Password for the user (clear text)

5

(Optional) Indicates that the password that follows should be encrypted

s3

(Optional) strongly encrypted password

s4

(Optional) Password for the user (clear text)

expire

(Optional) Expiry date for this user account(in YYYY-MM-DD format)

s5

(Optional) Expiry in YYYY-MM-DD format

past

(Optional) Expiry date is in past

s7

user name

priv-lvl

(Optional) privilege level which the user is to be assigned to

p

(Optional) privilege level

Command Mode
  • /exec/configure

username

{ username <s0> [ password { 0 <s2> | 5 <s3> | <s4> } ] [ expire <s5> [ past ] ] [ role <s6> ] } | { username <s0> [ password { 0 <s2> | 5 <s3> | <s4> } ] [ role <s6> ] [ expire <s5> [ past ] ] } | { username <s0> [ expire <s5> [ past ] ] [ password { 0 <s2> | 5 <s3> | <s4> } ] [ role <s6> ] } | { username <s0> [ expire <s5> [ past ] ] [ role <s6> ] [ password { 0 <s2> | 5 <s3> | <s4> } ] } | { username <s0> [ role <s6> ] [ password { 0 <s2> | 5 <s3> | <s4> } ] [ expire <s5> [ past ] ] } | { username <s0> [ role <s6> ] [ expire <s5> [ past ] ] [ password { 0 <s2> | 5 <s3> | <s4> } ] } | { no username <s7> [ role <s8> ] }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

username

Configure user information.

s0

user name

password

(Optional) Password for the user

0

(Optional) Indicates that the password that follows should be in clear text

s2

(Optional) Password for the user (clear text)

5

(Optional) Indicates that the password that follows should be encrypted

s3

(Optional) strongly encrypted password

s4

(Optional) Password for the user (clear text)

expire

(Optional) Expiry date for this user account(in YYYY-MM-DD format)

s5

(Optional) Expiry in YYYY-MM-DD format

past

(Optional) Expiry date is in past

role

(Optional) role which the user is to be assigned to

s6

(Optional) role name

s7

user name

s8

(Optional) role name

Command Mode
  • /exec/configure

username

{ username <s0> { shelltype { vsh | bash } } }

Syntax Description

Syntax Description

username

Configure user information.

s0

user name

shelltype

Choose shell type for login

vsh

use vsh shell

bash

use bash shell

Command Mode
  • /exec/configure

username

[no] username <s0> { sshkey2 { file <uri0> | <line> } }

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

username

Configure user information.

s0

user name

sshkey2

Update ssh key for the user for ssh authentication

file

ssh key file

uri0

file containing host public key for the user

line

ssh key for the user

Command Mode
  • /exec/configure

username

{ [ no ] username <name> }

Syntax Description

Syntax Description

username

user name

name

user name

Command Mode
  • /exec/configure/dot1x-cred

username keypair export dsa

{ username <s0> keypair export <s1> { dsa | rsa } [ force ] }

Syntax Description

Syntax Description

username

Configure user information.

keypair

Use existing ssh keypair

export

Export keypair to Bootflash/Remote directory

force

(Optional) Force the export of keys even if the destination files are present

dsa

Use DSA Keys

rsa

Use RSA Keys

s0

user name

s1

Enter filename to export to

Command Mode
  • /exec/configure

username keypair generate dsa

{ username <s0> keypair generate { dsa [ force ] | rsa [ <i0> | <oldrange> ] [ force ] } | no username <s0> keypair generate [ { dsa [ force ] | rsa [ <i0> | <oldrange> ] [ force ] } ] }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

username

Configure user information.

s0

user name

generate

Generate ssh key pairs

keypair

Generate SSH User Keys

dsa

Generate DSA keys

force

(Optional) Force the generation of keys even if previous ones are present

rsa

Generate RSA keys

i0

(Optional) Enter number of bits (in multiples of 8)

oldrange

(Optional) Enter number of bits

Command Mode
  • /exec/configure

username keypair import dsa

{ username <s0> keypair import <s1> { dsa | rsa } [ force ] }

Syntax Description

Syntax Description

username

Configure user information.

keypair

Use existing ssh keypair

import

Import keypair from Bootflash/Remote directory

force

(Optional) Force the generation of keys even if previous ones are present

dsa

Use DSA Keys

rsa

Use RSA Keys

s0

user name

s1

Enter filename to import

Command Mode
  • /exec/configure

username password

[no] username <user> password { 0 <pass1> | 5 <pass2> | <pass3> }

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

username

Configure user name

user

Username

password

Password for user

0

Indicates that the password that follows should be in clear text

pass1

Password for the user (clear text)

5

Indicates that the password that follows should be encrypted

pass2

strongly encrypted password

pass3

Password for the user (clear text)

Command Mode
  • /exec/configure/vmt-conn

username ssh-cert-dn dsa

[no] username <s1> ssh-cert-dn <s2> { dsa | rsa }

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

username

Configure user information.

s1

user name

ssh-cert-dn

Update cert dn

s2

distinguished name to be used

dsa

Use dsa algorithm

rsa

Use rsa algorithm

Command Mode
  • /exec/configure

username sshkey

{ username <s0> sshkey { file <uri0> | <line> } | no username <s0> sshkey }

Syntax Description

Syntax Description

username

Configure user information.

s0

user name

sshkey

Update ssh key for the user for ssh authentication

file

ssh key file

uri0

file containing host public key for the user

line

ssh key for the user

no

Negate a command or set its defaults

Command Mode
  • /exec/configure

userpassphrase

[no] userpassphrase { min-length | max-length | length }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

userpassphrase

user passphrase

min-length

passphrase minimum length

max-length

passphrase maximum length

length

passphrase min and max length

Command Mode
  • /exec/configure

userpassphrase min

userpassphrase { min-length <min-len> | max-length <max-len> } +

Syntax Description

Syntax Description

userpassphrase

user passphrase

min-length

passphrase minimum length

max-length

passphrase maximum length

min-len

minimum length of passphrase

max-len

maximum length of passphrase

Command Mode
  • /exec/configure

userprofile trustedCert CRLLookup user-switch-bind user-certdn-match user-pubkey-match attribute-name search-filter base-DN

{ userprofile | trustedCert | CRLLookup | user-switch-bind | user-certdn-match | user-pubkey-match } attribute-name <s0> search-filter <s1> base-DN <s2>

Syntax Description

Syntax Description

userprofile

Set the userprofile

trustedCert

Set the trustedCert

CRLLookup

Set the CRLLookup

user-switch-bind

Set the user-switch-bind

user-certdn-match

Set the certificate matching

user-pubkey-match

Set the pubkey matching

attribute-name

LDAP attribute-name

s0

Search Map attribute-name

search-filter

LDAP search-filter

s1

Search Map search-filter

base-DN

LDAP base-DN

s2

Search Map base-DN Name

Command Mode
  • /exec/configure/ldap/search