Cisco Nexus 9000 Series NX-OS Command Reference (Configuration Commands), Release 7.0(3)I6(1)

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents
Find Matches in This Book

Results

Updated:
June 7, 2017

Chapter: V Commands

V Commands

validate-xml

| validate-xml

Syntax Description

Syntax Description

|

Pipe command output to filter

validate-xml

validate an xml output according to .xsd definitions
Command Mode
  • /output

validate-xml

| validate-xml

Syntax Description

Syntax Description

|

Pipe command output to filter

validate-xml

validate an xml output according to .xsd definitions
Command Mode
  • /output

variance

{ { variance <variance> } | { no variance [ <variance> ] } }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

variance

Control load balancing variance

variance

Metric variance multiplier
Command Mode
  • /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

vdc

vdc <e-vdc> [ id <new_id> ] [ type <vtype> ]

Syntax Description

Syntax Description

vdc

Manage Virtual Device Context

e-vdc

Enter Virtual Device Context <vdc-id>

id

(Optional) force this vdc into a specific id

new_id

(Optional) force this vdc into a specific id

type

(Optional) Create vdc with a special set of services

vtype

(Optional) type of vdc
Command Mode
  • /exec/configure

vdc

[no] vdc <e-vdc> [ force ]

Syntax Description

Syntax Description

no

Negate a command or set its defaults

vdc

Manage Virtual Device Context

e-vdc

Enter Virtual Device Context <vdc-id>

force

(Optional) Force ungraceful cleanup
Command Mode
  • /exec/configure

vdc combined-hostname

[no] vdc combined-hostname

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

vdc

Manage Virtual Device Context

combined-hostname

The hostname of non-default vdcs will be <default vdc name>-<nondefault vdc name>
Command Mode
  • /exec/configure

vdc_id

[no] vdc_id <id>

Syntax Description

Syntax Description

no

Negate a command or set its defaults

vdc_id

Manage Virtual Device Context

id

Enter Virtual Device Context <vdc-id>
Command Mode
  • /exec/configure

vdc resource template

[no] vdc resource template { <name> | <res-mgr-template-known-name> }

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

vdc

Manage Virtual Device Context

resource

Configure resource template

template

Configure resource template

name

Resource template name

res-mgr-template-known-name

Resource template name
Command Mode
  • /exec/configure

vdc suspend

vdc <en-vdc> suspend

Syntax Description

Syntax Description

vdc

Manage Virtual Device Context

en-vdc

Enter Virtual Device Context <vdc-id>

suspend

Put the vdc in a paused state. When resumed vdc will come up with its startup config
Command Mode
  • /exec/configure

vdc suspend

[no] vdc <en-vdc> suspend

Syntax Description

Syntax Description

vdc

Manage Virtual Device Context

en-vdc

Enter Virtual Device Context <vdc-id>

suspend

Put the vdc in a paused stated. When resumed vdc will use its startup config
Command Mode
  • /exec/configure

vdp dot1q default static

{ vdp dot1q default { static <profile-name> | dynamic } } | { no vdp dot1q default }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

vdp

VDP protocol triggers

static

Static Profile Map: Configure profile name via CLI

profile-name

dynamic

Dynamic Profile Map: Retrieve profile name from the external server

dot1q

Dot1Q Encapsulation

default

Default (wildcard). Match any dot1q when there is no specific dot1q mapping configured
Command Mode
  • /exec/configure/profile-map /exec/configure/profile-map-global

vdp dot1q static

{ vdp dot1q <vlan-id> { static <profile-name> | dynamic } } | { no vdp dot1q <vlan-id> }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

vdp

VDP protocol triggers

static

Static Profile Map: Configure profile name via CLI

profile-name

dynamic

Dynamic Profile Map: Retrieve profile name from the external server

dot1q

Dot1Q Encapsulation

vlan-id

Command Mode
  • /exec/configure/profile-map /exec/configure/profile-map-global

vdp vni default static

{ vdp vni default { static <profile-name> | dynamic } } | { no vdp vni default }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

vdp

VDP protocol triggers

vni

Virtual Network Identifier

static

Static Profile Map: Configure profile name via CLI

dynamic

Dynamic Profile Map: Retrieve profile name from the external server

profile-name

default

Default (wildcard). Match any vni when there is no specific vni mapping configured
Command Mode
  • /exec/configure/profile-map /exec/configure/profile-map-global

vdp vni static

{ vdp vni <vni-id> { static <profile-name> | dynamic } } | { no vdp vni <vni-id> }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

vdp

VDP protocol triggers

vni

Virtual Network Identifier

vni-id

static

Static Profile Map: Configure profile name via CLI

dynamic

Dynamic Profile Map: Retrieve profile name from the external server

profile-name

Command Mode
  • /exec/configure/profile-map /exec/configure/profile-map-global

vendor controller interop

[no] vendor controller interop

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

vendor

vendor

controller

controller

interop

interop
Command Mode
  • /exec/configure

verify-data

{ { no | default } verify-data | verify-data }

Syntax Description

Syntax Description

no

default

Set a command to its defaults

verify-data

Verify data
Command Mode
  • /exec/configure/ip-sla/udp /exec/configure/ip-sla/jitter /exec/configure/ip-sla/icmpEcho

verify

verify

Syntax Description

Syntax Description

verify

Verify the current configuration session
Command Mode
  • /exec/configure

verify profile

verify profile <all_conf_profile_name> [ __readonly__ TABLE_profile_name <missing_param> ]

Syntax Description

Syntax Description

verify

Verify the instance with a configuration profile

profile

Name of the configuration profile

all_conf_profile_name

Enter the name of configuration profile

__readonly__

(Optional)

TABLE_profile_name

(Optional)

missing_param

(Optional)

Command Mode
  • /exec/configure/param-inst

verify verbose

verify verbose

Syntax Description

Syntax Description

verify

Verify the current configuration session

verbose

Verify the current configuration session with more details
Command Mode
  • /exec/configure

version

[no] version <s0>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

version

Version info

s0

Version
Command Mode
  • /exec/configure

version 5

[no] version 5

Syntax Description

Syntax Description

version

Specify the export version

5

Version 5 Export
Command Mode
  • /exec/configure/nfm-exporter

version 9

[no] version 9

Syntax Description

Syntax Description

version

Specify the export version

9

Version 9 Export
Command Mode
  • /exec/configure/nfm-exporter

virtual-service

[no] virtual-service

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

virtual-service

Virtual service global settings
Command Mode
  • /exec/configure

virtual-service

[no] virtual-service <virt_serv_name>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

virtual-service

Configure a virtual service

virt_serv_name

Virtual service name
Command Mode
  • /exec/configure

virtual-service

virtual-service { { install name <virt_serv_name> package <file_uri> [ media <target_media> ] } | { upgrade name <virt_serv_name> package <file_uri> } | { uninstall name <virt_serv_name> } }

Syntax Description

Syntax Description

virtual-service

Virtualization manager actions

install

Add a virtual service to install database

upgrade

Upgrade a virtual service package to a different version

name

Name of the virtual service

virt_serv_name

Virtual service name

package

Package location

file_uri

File name (with .ova extension) for the virtual service

media

(Optional) Target media to use to explode the virtual service package

target_media

(Optional) Target media

uninstall

Remove a virtual service from the install database
Command Mode
  • /exec

virtual-service connect name console

virtual-service connect name <virt_serv_name> { console | aux }

Syntax Description

Syntax Description

virtual-service

Virtualization service actions

connect

Request a virtual service shell

name

Name of the virtual service

virt_serv_name

Name of existing virtual service

console

Request a virtual service console shell

aux

Request a virtual service auxiliary console shell
Command Mode
  • /exec

virtual-service move name log to

virtual-service move name <virt_serv_name> { log | core } to <dir_uri>

Syntax Description

Syntax Description

virtual-service

Virtualization service actions

move

Move a virtual service log or core files

name

Name of the virtual service

virt_serv_name

Name of existing virtual service

log

Move log files

core

Move core files

to

Destination directory to move log or core files to

dir_uri

Destination directory name
Command Mode
  • /exec

virtual-service reset force

virtual-service reset force

Syntax Description

Syntax Description

virtual-service

Virtualization service actions

reset

Virtualization reset commands

force

Force a non-recoverable reset of all virtualization files
Command Mode
  • /exec

virtual IPv6

[no] virtual IPv6 { <ip-addr> { <prefix> | <netmask> } } [ ip | { { udp | tcp } { <port_num> | any } } ] [ { arp | advertise } { enable | disable } ]

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

virtual

ITD virtual ip configuration

IPv6

ITD virtual IPv6

prefix

IPV6 prefix length

ip

(Optional) IP Protocol

udp

(Optional) UDP Protocol

tcp

(Optional) TCP Protocol

port_num

(Optional) Port Number

any

(Optional) Any Port Number

arp

(Optional) ARP

advertise

(Optional) advertise

enable

(Optional) Enable

disable

(Optional) Disable
Command Mode
  • /exec/configure/itd

virtual IPv6

[no] virtual IPv6 { <ip-addr> { <prefix> | <netmask> } } [ ip | { { udp | tcp } { <port_num> | any } } ] [ { arp | advertise } { enable | disable } ] [ device-group <dgrp_name> ]

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

virtual

ITD virtual ip configuration

IPv6

ITD virtual IPv6

prefix

IPV6 prefix length

ip

(Optional) IP Protocol

udp

(Optional) UDP Protocol

tcp

(Optional) TCP Protocol

port_num

(Optional) Port Number

any

(Optional) Any Port Number

arp

(Optional) ARP

advertise

(Optional) advertise

enable

(Optional) Enable

disable

(Optional) Disable

device-group

(Optional) device-group

dgrp_name

(Optional) VIP device-group name
Command Mode
  • /exec/configure/itd

virtual IPv6

[no] virtual IPv6 { <ip-addr> { <prefix> | <netmask> } } [ ip | { { udp | tcp } { <port_num> | any } } ] [ { arp | advertise } { enable | disable } ] [ device-group <dgrp_name> ]

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

virtual

PLB virtual ip configuration

IPv6

PLB virtual IPv6

prefix

IPV6 prefix length

ip

(Optional) IP Protocol

udp

(Optional) UDP Protocol

tcp

(Optional) TCP Protocol

port_num

(Optional) Port Number

any

(Optional) Any Port Number

arp

(Optional) ARP

advertise

(Optional) advertise

enable

(Optional) Enable

disable

(Optional) Disable

device-group

(Optional) device-group

dgrp_name

(Optional) VIP device-group name
Command Mode
  • /exec/configure/plb

virtual ip

[no] virtual ip { <ip-addr> <ip-mask> } [ ip | { { udp | tcp } { <port_num> | any } } ] [ { arp | advertise } { enable | disable } ]

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

virtual

ITD virtual ip configuration

ip

ITD virtual ip

ip-addr

IP address in format i.i.i.i

ip-mask

IP network mask in format m.m.m.m

ip

(Optional) IP Protocol

udp

(Optional) UDP Protocol

tcp

(Optional) TCP Protocol

port_num

(Optional) Port Number

any

(Optional) Any Port Number

arp

(Optional) ARP

advertise

(Optional) advertise

enable

(Optional) Enable

disable

(Optional) Disable
Command Mode
  • /exec/configure/itd

virtual ip

[no] virtual ip { <ip-addr> <ip-mask> } [ ip | { { udp | tcp } { <port_num> | any } } ] [ { arp | advertise } { enable | disable } ] [ device-group <dgrp_name> ]

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

virtual

ITD virtual ip configuration

ip

ITD virtual ip

ip-addr

IP address in format i.i.i.i

ip-mask

IP network mask in format m.m.m.m

ip

(Optional) IP Protocol

udp

(Optional) UDP Protocol

tcp

(Optional) TCP Protocol

port_num

(Optional) Port Number

any

(Optional) Any Port Number

arp

(Optional) ARP

advertise

(Optional) advertise

enable

(Optional) Enable

disable

(Optional) Disable

device-group

(Optional) device-group

dgrp_name

(Optional) VIP device-group name
Command Mode
  • /exec/configure/itd

virtual ip

[no] virtual ip { <ip-addr> <ip-mask> } [ ip | { { udp | tcp } { <port_num> | any } } ] [ { arp | advertise } { enable | disable } ] [ device-group <dgrp_name> ]

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

virtual

PLB virtual ip configuration

ip

PLB virtual ip

ip-addr

IP address in format i.i.i.i

ip-mask

IP network mask in format m.m.m.m

ip

(Optional) IP Protocol

udp

(Optional) UDP Protocol

tcp

(Optional) TCP Protocol

port_num

(Optional) Port Number

any

(Optional) Any Port Number

arp

(Optional) ARP

advertise

(Optional) advertise

enable

(Optional) Enable

disable

(Optional) Disable

device-group

(Optional) device-group

dgrp_name

(Optional) VIP device-group name
Command Mode
  • /exec/configure/plb

vlan-consistency-check

[no] vlan-consistency-check

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

vlan-consistency-check

Enable vlan consistency check
Command Mode
  • /exec/configure/evpn-esi-mh

vlan

vlan <vlans> | no vlan

Syntax Description

Syntax Description

no

Negate a command or set its defaults

vlan

Set allowed fabricpath VLANs for a given anycast bundle

vlans

VLAN IDs of the allowed fabricpath VLANs in the anycast bundle
Command Mode
  • /exec/configure/anycast

vlan

[no] vlan <vlan-range>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

vlan

add vlan to vlan group

vlan-range

range of vlans
Command Mode
  • /exec/configure/itd-vlan-grp

vlan

[no] vlan <vlan-range>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

vlan

vlan

vlan-range

range of vlans
Command Mode
  • /exec/configure/smartc /exec/configure/smartc

vlan access-map

[no] vlan access-map <name> [ <seqno> ]

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

vlan

Vlan commands

name

List name

access-map

Configure a VLAN access map

seqno

(Optional) Sequence number
Command Mode
  • /exec/configure

vlan designated priority

{ vlan <vlan-id> | bridge-domain <bd-id> } designated priority <prio> | no { vlan <vlan-id> | bridge-domain <bd-id> } designated priority [ <prio> ]

Syntax Description

Syntax Description

no

Negate a command or set its defaults

vlan

VLAN Switch Spanning Trees

bridge-domain

Bridge-Domain Switch Spanning Trees

vlan-id

vlan range, Example: 1,3-5,7,9-11

bd-id

Bridge-Domain range, Example: 2,4-5,7,9-11

designated

Set the designated bridge priority for the spanning tree

priority

Set the bridge priority for the spanning tree

prio

bridge priority in increments of 4096
Command Mode
  • /exec/configure/spanning-tree/pseudo

vlan filter vlan

[no] vlan filter <name> { vlan-list <vlans> | vlan-list-include-reserved <vlans-include-reserved> }

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

vlan

Vlan commands

filter

Specify access control for packets

name

List name

vlan-list

Specify list of VLANs to apply access control

vlans

List of VLANs

vlan-list-include-reserved

Specify list of VLANs to apply access control

vlans-include-reserved

List of VLANs
Command Mode
  • /exec/configure

vlan root priority

{ vlan <vlan-id> | bridge-domain <bd-id> } root priority <prio> | no { vlan <vlan-id> | bridge-domain <bd-id> } root priority [ <prio> ]

Syntax Description

Syntax Description

no

Negate a command or set its defaults

vlan

VLAN Switch Spanning Trees

bridge-domain

Bridge-Domain Switch Spanning Trees

vlan-id

vlan range, Example: 1,3-5,7,9-11

bd-id

Bridge-Domain range, Example: 2,4-5,7,9-11

root

Set the root bridge priority for the spanning tree

priority

Set the bridge priority for the spanning tree

prio

bridge priority in increments of 4096
Command Mode
  • /exec/configure/spanning-tree/pseudo

vmtracker connection

[no] vmtracker connection <connection-name>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

vmtracker

Configure vmtracker parameters

connection

Specify a host to connect

connection-name

VM host name
Command Mode
  • /exec/configure

vmtracker connection refresh

[no] vmtracker connection <connection-name> refresh

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

vmtracker

Configure vmtracker parameters

connection

Specify a host to connect

connection-name

VM host name

refresh

Refresh all host related information
Command Mode
  • /exec/configure

vmtracker enable

[no] vmtracker enable

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

vmtracker

Configure vmtracker feature

enable

Enable vmtracker feature on interface
Command Mode
  • /exec/configure/if-switching

vmtracker fabric auto-config

[no] vmtracker fabric auto-config

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

vmtracker

Configure vmtracker parameters

fabric

Enable VM Tracker Fabric paramters

auto-config

Enable VM Tracker Fabric AutoConfiguration
Command Mode
  • /exec/configure

vmtracker set device-id

[no] vmtracker set device-id <dev-id>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

vmtracker

Configure vmtracker parameters

set

Set vmtracker options

device-id

Set the device-id

dev-id

Device id
Command Mode
  • /exec/configure

vn-segment

vn-segment { <segment-id> | <zero-segment-id> } | no vn-segment

Syntax Description

Syntax Description

no

Negate a command or set its defaults

vn-segment

VN Segment id of the VLAN

segment-id

segment-id

zero-segment-id

segment-id
Command Mode
  • /exec/configure/vlan

vni

{ vni <id> } | { no vni [ <id> ] }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

vni

Virtual Network Identifier

id

vni, Example: 4096,6099
Command Mode
  • /exec/configure/vrf

vni default dynamic

{ vni default dynamic } | { no vni default }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

dynamic

Dynamic Profile Map: Retrieve profile name from the external server

vni

Virtual Network Identifier

default

Default (wildcard). Match any vni when there is no specific vni mapping configured
Command Mode
  • /exec/configure/profile-map /exec/configure/profile-map-global

vni l2

[no] vni <vni_id> l2

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

vni

Configure Ethernet VPN ID

vni_id

Specify VNI ID

l2

Layer-2 VNI
Command Mode
  • /exec/configure/evpn

vpc

vpc [ <vpc_num> ] | no vpc [ <vpc_num> ]

Syntax Description

Syntax Description

no

Negate a command or set its defaults

vpc

Virtual Port Channel configuration

vpc_num

(Optional) specify a Virtual Port Channel number
Command Mode
  • /exec/configure/if-eth-port-channel-switch

vpc domain

vpc domain <domain_id> | no vpc domain <domain_id>

Syntax Description

Syntax Description

no

Negate a command or set its defaults

vpc

Virtual Port Channel configuration

domain

Specify domain

domain_id

domain id
Command Mode
  • /exec/configure

vpc orphan-port suspend

[no] vpc orphan-port suspend

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

vpc

Virtual Port Channel configuration

orphan-port

orphan-port (non-vpc port)

suspend

suspend - when vPC secondary peerlink goes down
Command Mode
  • /exec/configure/if-eth-phy /exec/configure/if-eth-port-channel-switch /exec/configure/if-eth-port-channel

vpc peer-link

vpc peer-link | no vpc peer-link

Syntax Description

Syntax Description

no

Negate a command or set its defaults

vpc

Virtual Port Channel configuration

peer-link

specify if this link is used for peer communication
Command Mode
  • /exec/configure/if-eth-port-channel-switch

vpc suspend

vpc suspend [ <n-secs> ]

Syntax Description

Syntax Description

vpc

Virtual Port Channel configuration

suspend

Suspend the vPC on primary

n-secs

(Optional) Suspension duration in seconds
Command Mode
  • /exec/configure/vpc-domain

vpc upgrade-done

vpc upgrade-done

Syntax Description

Syntax Description

vpc

Virtual Port Channel configuration

upgrade-done

Unlock the cli and remove ISSU state
Command Mode
  • /exec

vpn

[no] vpn <otv-isis-vpn-name>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

vpn

Configure IS-IS VPN name eg: Overlay<x>

otv-isis-vpn-name

Overlay name
Command Mode
  • /exec/configure/otv-isis

vpn id

vpn id <vpn-id> | no vpn id [ <vpn-id> ]

Syntax Description

Syntax Description

no

Negate a command or set its defaults

vpn

Configure VPN ID in rfc2685 format

id

Configure VPN ID in rfc2685 format

vpn-id

OUI:VPN-Index, format (hex) <3 bytes OUI:4 bytes VPN-Index>
Command Mode
  • /exec/configure/vrf

vrf

[no] vrf <vrf-name>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

vrf

Configure RIP VRF information

vrf-name

VRF name
Command Mode
  • /exec/configure/router-rip

vrf

[no] vrf <vrf-name>

Syntax Description

Syntax Description

vrf-name

VRF name

vrf

Virtual Router Context

no

(Optional) Negate a command or set its defaults
Command Mode
  • /exec/configure/router-bgp/router-bgp-bmp-server

vrf

[no] vrf <vrf-name>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

vrf

Virtual Router Context

vrf-name

VRF name
Command Mode
  • /exec/configure/router-bgp

vrf

[no] vrf <vrf-name>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

vrf

Display per-VRF information

vrf-name

VRF name
Command Mode
  • /exec/configure/router-ospf

vrf

{ vrf <name> } | { no vrf <name> }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

vrf

ITD service vrf

name

ITD Service VRF name
Command Mode
  • /exec/configure/itd

vrf

{ vrf <name> } | { no vrf <name> }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

vrf

ITD service vrf

name

ITD Service VRF name
Command Mode
  • /exec/configure/itd

vrf

[no] vrf <vrf-name>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

vrf

Configure ISIS VRF information

vrf-name

VRF name
Command Mode
  • /exec/configure/router-isis

vrf

[no] vrf <vrf-name>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

vrf

Display per-VRF information

vrf-name

VRF name
Command Mode
  • /exec/configure/router-ospf3

vrf

{ vrf <name> } | { no vrf <name> }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

vrf

PLB service vrf

name

PLB Service VRF name
Command Mode
  • /exec/configure/plb

vrf

[no] vrf <vrf-name>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

vrf

Configure VRF information

vrf-name

VRF name
Command Mode
  • /exec/configure/router-eigrp

vrf

{ { no | default } vrf |

Syntax Description

Syntax Description

no

default

Set a command to its defaults

vrf

Configure IP SLAs for a VPN Routing/Forwarding instance
Command Mode
  • /exec/configure/ip-sla/udp /exec/configure/ip-sla/jitter /exec/configure/ip-sla/tcp /exec/configure/ip-sla/icmpEcho /exec/configure/ip-sla/dns /exec/configure/ip-sla/http

vrf context

vrf context <vrf-name> | no vrf context { <vrf-name> | <vrf-name> }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

vrf

Configure VRF parameters

context

Create VRF and enter VRF mode

vrf-name

VRF name

vrf-name

VRF name

vrf-name

VRF name
Command Mode
  • /exec/configure

vrf default static

{ vrf default { static <profile-name> | dynamic } } | { no vrf default }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

vrf

VRF name

default

Default (wildcard). Match any vrf when there is no specific vrf mapping configured

static

Static Profile Map: Configure profile name via CLI

profile-name

dynamic

Dynamic Profile Map: Retrieve profile name from the external server
Command Mode
  • /exec/configure/profile-map-global

vrf member

vrf member { <vrf_name> | <vrf-known-name> } | no vrf member [ <vrf_name> | <vrf-known-name> ]

Syntax Description

Syntax Description

no

Negate a command or set its defaults

vrf

Configure VPN Routing/Forwarding table

member

Set route's VRF membership

vrf_name

VRF name

vrf-known-name

Known VRF name
Command Mode
  • /exec/configure/track

vrf member

vrf member <vrf-name> | no vrf member [ <vrf-name> ]

Syntax Description

Syntax Description

no

Negate a command or set its defaults

vrf

Configure VRF parameters

member

Set interface's VRF membership

vrf-name

VRF name
Command Mode
  • /exec/configure/if-igp /exec/configure/if-mgmt-ether

vrf static

{ vrf <vrf-name> { static <profile-name> | dynamic } } | { no vrf <vrf-name> }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

vrf

VRF name

vrf-name

VRF name

static

Static Profile Map: Configure profile name via CLI

profile-name

dynamic

Dynamic Profile Map: Retrieve profile name from the external server
Command Mode
  • /exec/configure/profile-map-global

vrrp

[no] vrrp <vr_id>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

vrrp

VRRP configuration commands

vr_id

IPv4 VR group number
Command Mode
  • /exec/configure/if-legacy-eth /exec/configure/if-ethernet /exec/configure/if-port-channel /exec/configure/if-vlan-common /exec/configure/if-eth-any

vrrp bfd

{ vrrp bfd <peer_intf_ip> | no vrrp bfd [ <peer_intf_ip> ] }

Syntax Description

Syntax Description

vrrp

VRRP configuration commands

bfd

BFD protocol

peer_intf_ip

Neighbor IP address

no

Negate a command or set its defaults
Command Mode
  • /exec/configure/if-eth-any/vrrp

vrrpv2

[no] vrrpv2

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

vrrpv2

Enable VRRPv2 compatibility mode
Command Mode
  • /exec/configure/if-eth-any/vrrpv3

vrrpv3

[no] vrrpv3

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

vrrpv3

VRRPv3 configuration commands
Command Mode
  • /exec/configure

vrrpv3 address-family

[no] vrrpv3 <group_id> address-family <opt_v4>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

vrrpv3

Configure VRRPv3 group parameters

address-family

IPV4 address family

opt_v4

Enter ipv4

group_id

VRRP Group ID
Command Mode
  • /exec/configure/if-eth-any /exec/configure/if-vlan

vrrpv3 address-family

[no] vrrpv3 <group_id> address-family <opt_v6>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

vrrpv3

Configure VRRPv3 group parameters

address-family

IPV6 address family

opt_v6

Enter ipv6

group_id

VRRP Group ID
Command Mode
  • /exec/configure/if-eth-any /exec/configure/if-vlan

vrrs leader

[no] vrrs leader <tag>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

vrrs

VRRS-related commands

leader

Name of VRRS tag for which this group is the leader

tag

VRRS tag to lead
Command Mode
  • /exec/configure/if-eth-any/vrrpv3

vrrs pathway

[no] vrrs pathway <name>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

vrrs

VRRS Interface configuration commands

pathway

Configure a VRRS pathway

name

Name of the VRRS tag to associate with pathway
Command Mode
  • /exec/configure/if-eth-any /exec/configure/if-vlan

vsh

| vsh

Syntax Description

Syntax Description

|

Pipe command output to filter

vsh

the shell that understands cli command
Command Mode
  • /output

Was this Document Helpful?

FeedbackFeedback

Contact Cisco