The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
callhome
Syntax Description
|
callhome |
Enter the callhome configuration mode |
callhome send configuration
Syntax Description
|
callhome |
callhome commands |
|
send |
send a command callhome message |
|
configuration |
configuration type |
callhome send diagnostic
Syntax Description
|
callhome |
callhome commands |
|
send |
send a command callhome message |
|
diagnostic |
dignostic command |
callhome send eem subject <s1> body <s2>
Syntax Description
|
callhome |
callhome commands |
|
send |
send a command callhome message |
|
eem |
eem action email |
|
subject |
action email subject |
|
body |
action email body |
|
s1 |
subject-text string |
|
s2 |
body-text string |
callhome test
Syntax Description
|
callhome |
callhome commands |
|
test |
send a test callhome message |
callhome test inventory
Syntax Description
|
callhome |
callhome commands |
|
test |
send a test callhome message |
|
inventory |
send a dummy callhome inventory |
callhome test supfail
Syntax Description
|
callhome |
callhome commands |
|
test |
send a test callhome message |
|
supfail |
send a dummy callhome message about sup failure |
[ no | default ] capability additional-paths receive [ disable ]
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
default |
(Optional) Inherit values from a peer template |
|
capability |
Advertise capability to the peer |
|
additional-paths |
Additional paths capability |
|
receive |
Additional paths Receive capability |
|
disable |
(Optional) Do not advertise additional paths Receive capability |
[ no | default ] capability additional-paths send [ disable ]
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
default |
(Optional) Inherit values from a peer template |
|
capability |
Advertise capability to the peer |
|
additional-paths |
Additional paths capability |
|
send |
Additional paths Send capability |
|
disable |
(Optional) Do not advertise additional paths Send capability |
[ no | default ] capability suppress 4-byte-as
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
default |
(Optional) Inherit values from a peer template |
|
capability |
Capability |
|
suppress |
Suppress sending out capability |
|
4-byte-as |
Suppress 4-byte AS Capability |
[no] capability vrf-lite [ evpn ]
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
capability |
Capability |
|
vrf-lite |
Enable VRF-lite support |
|
evpn |
(Optional) Ethernet VPN |
[no] capture session <session-id>
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
capture |
Enable packet capture on this filter for session |
|
session |
Session ID <1-48> for this session |
|
session-id |
Session ID <1-48> for this session |
carrier-delay { <sec_val> | msec <msec_val> } | no carrier-delay
Syntax Description
|
no |
Negate a command or set its defaults |
|
carrier-delay |
Specify delay for interface transitions |
|
sec_val |
Carrier Transitions delay seconds |
|
msec |
Carrier Transitions delay milliseconds |
|
msec_val |
Carrier Transitions delay milliseconds |
{ catena <instance-name> } | { no catena <instance-name> }
Syntax Description
|
no |
Negate a command or set its defaults |
|
catena |
L2 instance |
|
instance-name |
L2 instance-name |
{ catena device-group <device-grp-name> } | { no catena device-group <device-grp-name> }
Syntax Description
|
no |
Negate a command or set its defaults |
|
catena |
instance |
|
device-group |
device group |
|
device-grp-name |
device-grp-name |
{ catena port-group <port-group-name> } | { no catena port-group <port-group-name> }
Syntax Description
|
no |
Negate a command or set its defaults |
|
catena |
instance |
|
port-group |
port group |
|
port-group-name |
port-group-name |
{ catena vlan-group <vlan-grp-name> } | { no catena vlan-group <vlan-grp-name> }
Syntax Description
|
no |
Negate a command or set its defaults |
|
catena |
instance |
|
vlan-group |
vlan group |
|
vlan-grp-name |
vlan-grp-name |
[no] cbts-member tunnel-te <tunnel-num>
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
cbts-member |
Member Tunnel |
|
tunnel-te |
Tunnel Interface |
|
tunnel-num |
Tunnel Interface number |
cd <uri0>
Syntax Description
|
cd |
Change current directory |
|
uri0 |
Enter the name of the directory |
cdp advertise { v1 | v2 } | no cdp advertise [ v1 | v2 ]
Syntax Description
|
no |
Negate a command or set its defaults |
|
cdp |
Configure CDP parameters |
|
advertise |
Highest CDP version supported on the switch |
|
v1 |
CDP Version 1 |
|
v2 |
CDP Version 2 |
[no] cdp enable
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
cdp |
Configure CDP interface parameters |
|
enable |
Enable/disable CDP on the interface |
[no] cdp enable
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
cdp |
Configure CDP interface parameters |
|
enable |
Enable/disable CDP on all interfaces |
[no] cdp format device-id { mac-address | serial-number | system-name }
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
cdp |
Configure CDP parameters |
|
format |
Device ID format for CDP |
|
device-id |
Device ID format for CDP |
|
mac-address |
Mac-address of the Chassis |
|
serial-number |
Chassis Serial Number/OUI |
|
system-name |
System name/Fully Qualified Domain Name (Default) |
[no] cdp holdtime <i0>
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
cdp |
Configure CDP parameters |
|
holdtime |
CDP hold time advertised (in seconds) |
|
i0 |
CDP hold time advertised (in seconds) |
[no] cdp timer <i1>
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
cdp |
Configure CDP parameters |
|
timer |
CDP refresh time interval (in seconds) |
|
i1 |
CDP refresh time interval (in seconds) |
certificate <file-name> <host-name> | no certificate
Syntax Description
|
no |
Negate a command or set its defaults |
|
certificate |
Specify certificate |
|
file-name |
.pem certificate filename |
|
host-name |
hostname associated with certificate |
cfs clear message-context name <cfs-dyn-app-name> session-id <i0>
Syntax Description
|
cfs |
CFS parameters |
|
clear |
clear message context |
|
message-context |
clear message context |
|
name |
clear message context for given application |
|
cfs-dyn-app-name |
Registered name of the local application |
|
session-id |
Seesion id of message context |
|
i0 |
Seesion id |
cfs debug all
Syntax Description
|
cfs |
CFS parameters |
|
debug |
Internal command for debugs |
|
all |
Internal command for debugs |
[no] cfs distribute
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
distribute |
Enable fabric wide distribution |
{ cfs eth cos <i0> | no cfs eth cos [ <i0> ] }
Syntax Description
|
no |
Negate a command or set its defaults |
|
eth |
ETH configurations |
|
cos |
Configure CFS Ethernet COS value |
|
i0 |
COS Value Range |
[no] cfs eth distribute
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
eth |
ETH configurations |
|
distribute |
Enable CFS distribution over Ethernet |
cfs internal { decrement-uncoord <i0> | decrement-unrestricted <i1> | increment-uncoord <i2> | increment-unrestricted <i3> | lock <i4> | unlock <i5> | latency-log-on | latency-log-off }
Syntax Description
|
cfs |
CFS parameters |
|
internal |
CFs internal database modification |
|
decrement-uncoord |
Decrement the number of uncoord distributions for the sap |
|
i0 |
SAP of the application to be locked |
|
decrement-unrestricted |
Decrement the number of unrestricted distributions for the sap |
|
i1 |
SAP of the application to be locked |
|
increment-uncoord |
Increment the number of uncoord distributions for the sap |
|
i2 |
SAP of the application to be locked |
|
increment-unrestricted |
Increment the number of unrestricted distributions for the sap |
|
i3 |
SAP of the application to be locked |
|
lock |
Lock and application instance. |
|
i4 |
SAP of the application to be locked |
|
unlock |
UnLock a application instance. |
|
i5 |
SAP of the application to be unlocked |
|
latency-log-on |
Enable latency logs |
|
latency-log-off |
Disable latency logs |
cfs internal cfsoe { sap <i0> { lmi <i1> | ami <i2> | emi <i3> | reorder <i4> | send_ack <i5> | drop_packet <i6> | iod_register <i7> } | reset { all | reassembly_q } }
Syntax Description
|
cfs |
CFS parameters |
|
internal |
CFs internal database modification |
|
cfsoe |
CFSoE IoD internal values |
|
sap |
SAP Number |
|
i0 |
SAP Number |
|
lmi |
Least msg-id value |
|
i1 |
Msg-id value |
|
ami |
Application msg-id value |
|
i2 |
Msg-id value |
|
emi |
Least msg-id value |
|
i3 |
Msg-id value |
|
reorder |
Reorder Set/Unset |
|
i4 |
Set(1)/Unset(0) |
|
send_ack |
Send/Dont Send Ack |
|
i5 |
Set(1)/Unset(0) |
|
drop_packet |
Drop/Dont Drop Packet |
|
i6 |
Set(1)/Unset(0) |
|
iod_register |
Register app for IOD |
|
i7 |
Set(1)/Unset(0) |
|
reset |
Reset globally |
|
all |
All values |
|
reassembly_q |
Set Reassembly Queue count to zero |
[no] cfs ipv4 { distribute | mcast-address <ip0> }
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
ipv4 |
IPv4 configurations |
|
distribute |
Enable CFS distribution over IPv4 |
|
mcast-address |
Configure IPv4 multicast address |
|
ip0 |
Admin scope [239.255/16, 239.192/16-239.251/16] |
[no] cfs ipv6 { distribute | mcast-address <ipv60> }
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
ipv6 |
IPv6 configurations |
|
distribute |
Enable CFS distribution over IPv6 |
|
mcast-address |
Configure IPv6 multicast address |
cfs merge all-fabrics name <cfs-dyn-app-name> [ vsan <i0> ]
Syntax Description
|
cfs |
CFS parameters |
|
merge |
Resolve the merge failures |
|
all-fabrics |
Fabric wide within the scope of the application |
|
name |
Application name |
|
cfs-dyn-app-name |
Registered name of the local application |
|
vsan |
(Optional) For logical applications only |
|
i0 |
(Optional) Vsan Id |
[no] cfs region <i0>
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
region |
Regions to limit the distribution scope of application(s) |
|
i0 |
Region Id |
{ chain <chain-id> } | { no chain <chain-id> }
Syntax Description
|
no |
Negate a command or set its defaults |
|
chain |
chain for instance |
|
chain-id |
chain ID |
change-password [ old-password <s1> new-password <s2> ]
Syntax Description
|
change-password |
Change your password |
|
old-password |
(Optional) Current password for the user |
|
s1 |
(Optional) Current password for the user (clear text) |
|
new-password |
(Optional) New password for the user |
|
s2 |
(Optional) New password for the user (clear text) |
checkpoint { [ <name> ] [ description <descr_str> ] | file <file_uri> }
Syntax Description
|
checkpoint |
Create configuration rollback checkpoint |
|
name |
(Optional) Checkpoint name |
|
file |
Create configuration rollback checkpoint to file |
|
file_uri |
Checkpoint file path |
|
description |
(Optional) checkpoint description for the given checkpoint |
|
descr_str |
(Optional) checkpoint description(can include spaces) |
[no] checkpoint <chkpoint_name>
Syntax Description
|
no |
Negate a command or set its defaults |
|
checkpoint |
Delete configuration rollback checkpoint |
|
chkpoint_name |
Checkpoint name |
[no] cipher-suite <suite>
Syntax Description
|
cipher-suite |
Configure Cipher Suite |
|
suite |
Cipher Suite options |
[no] class-map [ type qos ] [ <any_or_all> ] <cmap-name>
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
class-map |
Configure a class map |
|
type |
(Optional) Specify the type of this class-map |
|
qos |
(Optional) Qos class |
|
any_or_all |
(Optional) Enter match-any or match-all |
|
cmap-name |
class-map name |
[no] class-map type control-plane [ <opt_any_or_all> ] <cmap-name>
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
class-map |
Configure a class map |
|
type |
Specify the type of this class-map |
|
control-plane |
Control-Plane |
|
opt_any_or_all |
(Optional) Enter match-any or match-all |
|
cmap-name |
Class-map name |
[no] class-map type network-qos [ match-any ] <cmap-name-nq>
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
class-map |
Configure a class map |
|
type |
Specify the type of this class-map |
|
network-qos |
Network QoS class |
|
match-any |
(Optional) Match on any criteria |
|
cmap-name-nq |
class-map name |
[no] class-map type psp [ <any_or_all> ] { <cmap-name-plc> | { handle <ppf_id> } } [ sequence <seq_no> ] [ client <clienttype> <clientID> ]
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
class-map |
Configure a class map |
|
type |
Specify the type of this class-map |
|
psp |
PSP class |
|
any_or_all |
(Optional) Enter match-any or match-all |
|
cmap-name-plc |
class-map name |
|
handle |
Handle |
|
ppf_id |
PPF ID |
|
sequence |
(Optional) sequence |
|
seq_no |
(Optional) Sequence number |
|
client |
(Optional) set client type |
|
clienttype |
(Optional) cli/onep |
|
clientID |
(Optional) client appID |
[no] class-map type queuing [ <any_or_all> ] { xxx <cmap-enum-name> | <cmap-dce-name> | zzz <cmap-name-hque> }
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
class-map |
Configure a class map |
|
type |
Specify the type of this class-map |
|
queuing |
Queuing class |
|
any_or_all |
(Optional) Enter match-any |
|
cmap-enum-name |
|
|
xxx |
xxx |
|
zzz |
zzz |
|
cmap-dce-name |
Queuing class-map name |
|
cmap-name-hque |
Hierarchical class-map name |
[no] class-map type queuing { <cmap-dce-name> }
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
class-map |
Configure a class map |
|
type |
Specify the type of this class-map |
|
queuing |
Queuing class |
|
cmap-dce-name |
Queuing class-map name |
class { <cmap-name> [ insert-before <cmap-name2> ] | class-default } | no class { <cmap-name> | class-default }
Syntax Description
|
no |
Negate a command or set its defaults |
|
class |
Attach class map to policy map |
|
cmap-name |
Class-map name |
|
insert-before |
(Optional) Insert this class before another class |
|
cmap-name2 |
(Optional) class map name before which insertion should happen |
|
class-default |
Use class default |
[no] class [ type qos ] <cmap-name> [ insert-before [ type qos1 ] <cmap-name2> ]
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
class |
Policy Criteria |
|
type |
(Optional) Specify the type of class |
|
qos |
(Optional) Match on Qos class |
|
cmap-name |
class map name |
|
insert-before |
(Optional) Insert this class before another class |
|
qos1 |
(Optional) Insert before Qos class |
|
cmap-name2 |
(Optional) class map name |
[no] class __inline__ [ type psp ] <cmap-name-plc> [ insert-before <cmap-name2> ]
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
class |
Policy Criteria |
|
__inline__ |
Inline Class |
|
type |
(Optional) Specify the type of class |
|
psp |
(Optional) Match on PSP class |
|
cmap-name-plc |
class map name |
|
insert-before |
(Optional) Insert this class before another class |
|
cmap-name2 |
(Optional) class map name |
[no] class class-default
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
class |
Policy Criteria |
|
class-default |
System default class matching otherwise unclassified packets |
[no] class type network-qos <cmap-name-nq>
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
class |
Match on network-qos class-map |
|
type |
Specify the type of this class-map |
|
network-qos |
Network QoS policy |
|
cmap-name-nq |
Match class-map name |
[no] class type network-qos class-default
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
class |
Match on network-qos class-map |
|
type |
Specify the type of this class-map |
|
network-qos |
Network QoS policy |
|
class-default |
System default class matching otherwise not classified cos values |
[no] class type psp { <cmap-name-plc> | { handle1 <ppf_id1> } } [ insert-before { <cmap-name2> | { handle2 <ppf_id2> } } ]
Syntax Description
|
no |
(Optional) Negate a command or set its defaults |
|
class |
Policy Criteria |
|
type |
Specify the type of class |
|
psp |
Match on PSP class |
|
cmap-name-plc |
class map name |
|
handle1 |
Handle1 |
|
ppf_id1 |
PPF ID1 |
|
insert-before |
(Optional) Insert this class before another class |
|
cmap-name2 |
(Optional) class map name |
|
handle2 |
(Optional) Handle2 |
|
ppf_id2 |
(Optional) PPF ID2 |
[no] class type queuing { xxx <cmap-enum-name> | <cmap-dce-name> | zzz <cmap-name-hque> } [ insert-before type queuing1 yyy <xcmap-enum-name> ]
Syntax Description
|
xxx |
xxx |
|
yyy |
(Optional) yyy |
|
zzz |
zzz |
|
no |
(Optional) Negate a command or set its defaults |
|
class |
Policy Criteria |
|
type |
Specify the type of class |
|
queuing |
Match on Queuing class |
|
cmap-enum-name |
|
|
cmap-dce-name |
Queuing class-map name |
|
cmap-name-hque |
Hierarchical class-map name |
|
insert-before |
(Optional) Insert this class before another class |
|
queuing1 |
(Optional) Insert before Queuing class |
|
xcmap-enum-name |
(Optional) |
clean ip bfd
Syntax Description
|
clean |
Clean internal datastructures |
|
ip |
IP related information |
|
bfd |
clean ip bfd datastructures |
clean ipv6 bfd
Syntax Description
|
clean |
Clean internal datastructures |
|
ipv6 |
IPV6 related information |
|
bfd |
clean ip bfd datastructures |
clear { { ip route [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] } | { routing [ vrf { <vrf-name> | <vrf-known-name> } ] [ ip | ipv4 ] [ unicast ] [ topology <topology-name> ] } } { <all> | { { <ip-addr> | <ip-prefix> } [ <nh-addr> | <nh-addr-v6> ] [ <nh-interface> ] } } [ no-ufdm ]
Syntax Description
|
clear |
Reset functions |
|
route |
Clear routing information |
|
routing |
Clear routing information |
|
vrf |
(Optional) Clear per-VRF information |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
vrf-all |
(Optional) Display information for all VRFs |
|
ip |
Clear IP commands |
|
ipv4 |
(Optional) Clear IP commands |
|
unicast |
(Optional) Clear unicast information |
|
topology |
(Optional) Clear per-topology information |
|
topology-name |
(Optional) Topology name |
|
all |
Clear all routes |
|
ip-addr |
Clear single host route |
|
ip-prefix |
Clear single exact match route |
|
nh-addr |
(Optional) Clear single path |
|
nh-interface |
(Optional) Interface Name |
|
no-ufdm |
(Optional) Do not tell UFDM about the change |
clear { { ipv6 route [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] } | { routing [ vrf { <vrf-name> | <vrf-known-name> } ] ipv6 [ unicast ] [ topology <topology-name> ] } } { <all> | { { <ipv6-addr> | <ipv6-prefix> } [ <nh-addr> <nh-interface> ] } } [ no-ufdm ]
Syntax Description
|
clear |
Reset functions |
|
route |
Clear routing information |
|
routing |
Clear routing information |
|
vrf |
(Optional) Clear per-VRF information |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
vrf-all |
(Optional) Display information for all VRFs |
|
ipv6 |
Clear IPv6 commands |
|
unicast |
(Optional) Clear unicast information |
|
topology |
(Optional) Clear per-topology information |
|
topology-name |
(Optional) Topology name |
|
all |
Clear all routes |
|
nh-interface |
(Optional) Interface Name |
|
no-ufdm |
(Optional) Do not tell UFDM about the change |
clear { { ip eigrp [ <eigrp-ptag> ] topology { { <address> <mask> } | { <prefix> } } [ vrf { <vrf-name> | <vrf-known-name> | all } ] } | { ipv6 eigrp [ <eigrp-ptag> ] topology { <ipv6-prefix> } [ vrf { <vrf-name> | <vrf-known-name> | all } ] } }
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
ipv6 |
Clear IPv6 commands |
|
eigrp |
EIGRP clear commands |
|
vrf |
(Optional) Display per-VRF information |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
all |
(Optional) Display information for all VRFs |
|
eigrp-ptag |
(Optional) Process tag |
|
topology |
Clear IP-EIGRP topology table entry |
|
address |
Network to display information about |
|
mask |
Network mask |
|
prefix |
IP prefix <network>/<length>, e.g., 192.168.0.0/16 |
|
eigrp-ptag |
(Optional) |
clear { { ip eigrp [ <eigrp-ptag> ] neighbors { * | <address> | <interface> } [ soft ] [ no-goodbye ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] } | { ipv6 eigrp [ <eigrp-ptag> ] neighbors { * | <ipv6-addr> | <interface> } [ soft ] [ no-goodbye ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] } }
Syntax Description
|
clear |
Reset functions |
|
ip |
Clear IP commands |
|
ipv6 |
Clear IPv6 commands |
|
eigrp |
EIGRP clear commands |
|
vrf |
(Optional) Display per-VRF information |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
all |
(Optional) Display information for all VRFs |
|
eigrp-ptag |
(Optional) Process tag |
|
neighbors |
Clear EIGRP neighbors |
|
* |
Clear all EIGRP neighbors |
|
address |
IP-EIGRP neighbor address |
|
interface |
Interface |
|
soft |
(Optional) Soft reset |
|
no-goodbye |
(Optional) No goodbye |
|
eigrp-ptag |
(Optional) |
clear aaa local user blocked { username <s0> | all }
Syntax Description
|
clear |
Reset functions |
|
aaa |
Configure aaa functions |
|
local |
Local username |
|
user |
Local system user |
|
blocked |
Clear blocked user |
|
username |
Blocked username |
|
s0 |
Enter the username |
|
all |
Clear all the blocked users |
clear [ <ip_ipv6_mac> ] access-list counters [ <name> ]
Syntax Description
|
clear |
Reset functions |
|
ip_ipv6_mac |
(Optional) IP/IPv6/MAC |
|
access-list |
Clear access list statistical information |
|
counters |
Clear access list counters |
|
name |
(Optional) List name |
clear access-list hardware counters [ module <module> ]
Syntax Description
|
clear |
Reset functions |
|
access-list |
Clear access list statistical information |
|
hardware |
hardware information |
|
counters |
Clear access list counters |
|
module |
(Optional) Slot/module |
|
module |
(Optional) Slot/module number |
clear access-list ipsg stats [ module <module> ] [ instance <instance_number> ]
Syntax Description
|
clear |
Reset functions |
|
access-list |
access-list |
|
ipsg |
ipsg |
|
stats |
Clear Statistics of IPSG drop entries |
|
module |
(Optional) Slot/module |
|
module |
(Optional) Slot/module number |
|
instance |
(Optional) ASIC Instance Number |
|
instance_number |
(Optional) ASIC Instance Number in Decimal |
clear accounting log
Syntax Description
|
clear |
Reset functions |
|
accounting |
Clear accounting log(s) in all vdcs |
|
log |
Clear the accounting log(s) in all vdcs |
clear aclqos cl-qos
Syntax Description
|
clear |
Reset functions |
|
aclqos |
Configure aclqos debug |
|
cl-qos |
cl-qos logs of ACLQOS |
clear aclqos fab
Syntax Description
|
clear |
Reset functions |
|
aclqos |
Configure aclqos debug |
|
fab |
Fabric logs of ACLQOS |
clear aclqos fc
Syntax Description
|
clear |
Reset functions |
|
aclqos |
Configure aclqos debug |
|
fc |
fc logs of ACLQOS |
clear aclqos libdrv
Syntax Description
|
clear |
Reset functions |
|
aclqos |
Configure aclqos debug |
|
libdrv |
libdrv logs of ACLQOS |
clear aclqos map
Syntax Description
|
clear |
Reset functions |
|
aclqos |
Configure aclqos debug |
|
map |
map logs of ACLQOS |
clear aclqos merge
Syntax Description
|
clear |
Reset functions |
|
aclqos |
Configure aclqos debug |
|
merge |
merge logs of ACLQOS |
clear aclqos pl
Syntax Description
|
clear |
Reset functions |
|
aclqos |
Configure aclqos debug |
|
pl |
pl logs of ACLQOS |
clear aclqos ppf-parse
Syntax Description
|
clear |
Reset functions |
|
aclqos |
Configure aclqos debug |
|
ppf-parse |
ppf-parse logs of ACLQOS |
clear aclqos ppf
Syntax Description
|
clear |
Reset functions |
|
aclqos |
Configure aclqos debug |
|
ppf |
ppf logs of ACLQOS |
clear aclqos qng-hw
Syntax Description
|
clear |
Reset functions |
|
aclqos |
Configure aclqos debug |
|
qng-hw |
Qng logs of ACLQOS |
clear aclqos qng
Syntax Description
|
clear |
Reset functions |
|
aclqos |
Configure aclqos debug |
|
qng |
Qng logs of ACLQOS |
clear aclqos rl
Syntax Description
|
clear |
Reset functions |
|
aclqos |
Configure aclqos debug |
|
rl |
RL logs of ACLQOS |
clear aclqos rm
Syntax Description
|
clear |
Reset functions |
|
aclqos |
Configure aclqos debug |
|
rm |
RM logs of ACLQOS |
clear aclqos sch
Syntax Description
|
clear |
Reset functions |
|
aclqos |
Configure aclqos debug |
|
sch |
Sch logs of ACLQOS |
clear aclqos stats
Syntax Description
|
clear |
Reset functions |
|
aclqos |
Configure aclqos debug |
|
stats |
stats logs of ACLQOS |
clear aclqos tbl
Syntax Description
|
clear |
Reset functions |
|
aclqos |
Configure aclqos debug |
|
tbl |
tbl logs of ACLQOS |
clear aclqos trace-detail
Syntax Description
|
clear |
Reset functions |
|
aclqos |
Configure aclqos debug |
|
trace-detail |
detail logs of ACLQOS |
clear aclqos trace
Syntax Description
|
clear |
Reset functions |
|
aclqos |
Configure aclqos debug |
|
trace |
trace logs of ACLQOS |
clear aclqos uf
Syntax Description
|
clear |
Reset functions |
|
aclqos |
Configure aclqos debug |
|
uf |
UF logs of ACLQOS |
clear bfd statistics
Syntax Description
|
clear |
Clear |
|
bfd |
bfd |
|
statistics |
statistics |
clear bgp { ipv4 { unicast | multicast } policy statistics { { redistribute [ { { eigrp | isis | ospf | rip } <tag> } | static | direct | amt | lisp | hmm | am ] } | { neighbor <neighbor-id> [ default-originate | { route-map | filter-list | prefix-list } { in | out } ] } | { dampening } | { network { <ip-addr> mask <ip-mask> | <ip-prefix> } } | { aggregate-address { <ip-addr> <ip-mask> | <ip-prefix> } { suppress-map | advertise-map } } } | { vpnv4 | vpnv6 } unicast policy statistics { neighbor <neighbor-id> [ { route-map | filter-list | prefix-list } { in | out } ] } | ipv6 { unicast | multicast } policy statistics { { redistribute [ { { eigrp | isis | ospfv3 | rip } <tag> } | static | direct | amt | lisp | hmm | am ] } | { neighbor { <neighbor-id> | <ipv6-neighbor-id> } [ default-originate | { route-map | filter-list | prefix-list } { in | out } ] } | { dampening } | { network <ipv6-prefix> } | { aggregate-address <ipv6-prefix> { suppress-map | advertise-map } } } }
Syntax Description
|
clear |
Reset functions |
|
ipv4 |
Clear IPv4 address-family |
|
ipv6 |
Clear IPv6 address-family |
|
vpnv4 |
Clear VPNv4 address-family |
|
vpnv6 |
Clear VPNv6 address-family |
|
bgp |
Clear BGP sessions |
|
unicast |
Clear unicast address-family |
|
multicast |
Clear multicast address-family |
|
policy |
Clear policy related information |
|
statistics |
Clear Route Filter statistics |
|
redistribute |
Statistics for redistribution |
|
isis |
(Optional) ISO IS-IS |
|
ospf |
(Optional) Open Shortest Path First (OSPF) |
|
ospfv3 |
(Optional) Open Shortest Path First v3 |
|
rip |
(Optional) Routing Information Protocol |
|
eigrp |
(Optional) Enhanced Interior Gateway Protocol |
|
static |
(Optional) Static routes |
|
direct |
(Optional) Directly connected |
|
amt |
(Optional) AMT anycast prefix |
|
lisp |
(Optional) LISP EID-prefixes in the non-default VRF |
|
hmm |
(Optional) HMM prefix |
|
am |
(Optional) AM routes (learned via ARP) |
|
tag |
(Optional) Source protocol tag |
|
neighbor |
Clear neighbor specific counters |
|
neighbor-id |
Neighbor IPv4 address |
|
route-map |
(Optional) Neighbor route-map |
|
prefix-list |
(Optional) Neighbor prefix-list |
|
filter-list |
(Optional) Neighbor filter-list |
|
out |
(Optional) Outbound policy |
|
in |
(Optional) Inbound policy |
|
default-originate |
(Optional) Default-originate policy |
|
dampening |
Clear dampening info |
|
network |
Configured IP prefix to advertise |
|
aggregate-address |
Configured BGP aggregate prefixes |
|
suppress-map |
Statistics of suppress policy |
|
advertise-map |
Statistics of advertise policy |
|
ip-addr |
IP network advertised |
|
mask |
Configured mask of the IP prefix advertised |
|
ip-mask |
Dotted 4-octet mask |
|
ip-prefix |
IP prefix in CIDR format |
clear bgp bmp stats server { <server-id> | all }
Syntax Description
|
clear |
Reset functions |
|
bgp |
Clear BGP sessions |
|
bmp |
Clear BMP |
|
stats |
Server Stats |
|
server |
BMP Server |
|
server-id |
Server ID |
|
all |
All BMP Servers |
clear bgp event-history { <bgp-event-hist> | detail | all | msgs }
Syntax Description
|
clear |
Reset functions |
|
bgp |
Clear BGP sessions |
|
event-history |
Clear event-history buffers |
|
bgp-event-hist |
Event History |
|
detail |
Show detailed event logs |
|
all |
All event history buffers |
|
msgs |
Clear message logs of BGP |
clear bgp private { all | global | threads | session | debug | io | memory | af | damp | lists | attr [ <ip-prefix> | <ipv6-prefix> ] | rpm-info [ <rpm-name> { <ip-prefix> | <ipv6-prefix> } ] | neighbor { <neighbor-id> | <ipv6-neighbor-id> } | slab | mqstat | ipc | rnh | rpm-attribute-cache | rpm-comm-attr-cache | peer-template <peer-template-name> | aggregates [ summary ] | bestpath }
Syntax Description
|
clear |
Reset functions |
|
bgp |
Clear BGP sessions |
|
private |
Clear internal BGP counters |
|
all |
Clear all info |
|
global |
Clear global info |
|
threads |
Clear thread info |
|
session |
Clear session info |
|
debug |
Clear debug info |
|
io |
Clear IO info |
|
memory |
Clear memory info |
|
af |
Clear AF info |
|
damp |
Clear dampening info |
|
lists |
Clear BGP internal lists |
|
attr |
Clear BGP attributes |
|
rpm-info |
Clear BGP policy outbound info |
|
ip-prefix |
(Optional) Clear attribute for a prefix |
|
neighbor |
Clear neighbor specific counters |
|
neighbor-id |
Neighbor IP address |
|
rpm-name |
(Optional) Route-map name |
|
slab |
Clear information about SLABs used |
|
mqstat |
Clear message queue stats |
|
ipc |
Clear ipc information |
|
rnh |
Clear recursive next hops |
|
aggregates |
Clear information about aggregates |
|
rpm-attribute-cache |
Clear rpm attribute cache statistics |
|
rpm-comm-attr-cache |
Clear rpm community attribute cache statistics |
|
peer-template |
Clear information about a peer-template |
|
bestpath |
Clear internal information about bestpath |
|
summary |
(Optional) Summary only |
|
peer-template-name |
Peer-template name |
clear bootvar log
Syntax Description
|
clear |
Reset functions |
|
bootvar |
Clear the bootvar log |
|
log |
Clear the bootvar log |
clear cdp { counters [ interface <if0> ] | table [ interface1 <if1> ] }
Syntax Description
|
clear |
Reset functions |
|
cdp |
Cisco Discovery Protocol |
|
counters |
Clear CDP counters on all interfaces |
|
interface |
(Optional) Clear CDP counters on an interface |
|
if0 |
(Optional) |
|
table |
Clear CDP cache on all interfaces |
|
interface1 |
(Optional) Clear CDP cache on an interface |
|
if1 |
(Optional) |
clear checkpoint database [ user | system ]
Syntax Description
|
clear |
Reset functions |
|
checkpoint |
Clear configuration rollback checkpoint |
|
database |
Clear configuration rollback checkpoint database |
|
user |
(Optional) Clear configuration rollback checkpoint database for user checkpoints |
|
system |
(Optional) Clear configuration rollback checkpoint database for system checkpoints |
clear cli history
Syntax Description
|
clear |
Reset functions |
|
cli |
debug cli |
|
history |
history of cli commands |
clear clis event-history { objstr | objstr-errors }
Syntax Description
|
clear |
Reset functions |
|
clis |
cli server |
|
event-history |
Event history logs for clis |
|
objstr |
Log of Object Store events |
|
objstr-errors |
Log of Object Store error events |
clear controller <ctrl-id> accounting log
Syntax Description
|
clear |
Show running system information |
|
controller |
Controller command |
|
ctrl-id |
Controller id value |
|
accounting |
Accounting |
|
log |
Clear log information |
clear copp statistics
Syntax Description
|
clear |
Reset functions |
|
copp |
Clear policy information for copp |
|
statistics |
Clear statistics |
clear cores
Syntax Description
|
clear |
Reset functions |
|
cores |
clear all core dumps for the switch |
clear cores archive [ file <s0> ]
Syntax Description
|
clear |
Reset functions |
|
cores |
clear all cores for this vdc |
|
archive |
clear all core dump files for this vdc from logflash on this module |
|
file |
(Optional) delete a core file on logflash |
|
s0 |
(Optional) Name of file in directory 'core |
clear counters
Syntax Description
|
clear |
Reset functions |
|
counters |
Clear counters |
clear counters buffers [ module <module> [ instance <instance> ] ] [ __readonly__ <clear_valid> ]
Syntax Description
|
clear |
Reset functions |
|
counters |
Clear counters |
|
buffers |
Clear system buffer max cell usage counter |
|
module |
(Optional) Slot/module |
|
module |
(Optional) Slot/module number |
|
instance |
(Optional) ASIC Instance Number |
|
instance |
(Optional) ASIC Instance Number in Decimal |
|
__readonly__ |
(Optional) Read Only |
|
clear_valid |
(Optional) Clear |
clear counters interface <ifindex>
Syntax Description
|
clear |
Reset functions |
|
counters |
Clear counters |
|
interface |
Clear interface counters |
|
ifindex |
Clear interface counters |
clear counters interface all
Syntax Description
|
clear |
Reset functions |
|
counters |
Clear counters |
|
interface |
Clear interface counters |
|
all |
Clear all interface counters |
clear counters interface <ifindex> snmp
Syntax Description
|
clear |
Reset functions |
|
counters |
Clear counters |
|
interface |
Clear interface counters |
|
ifindex |
Clear interface counters |
|
snmp |
Clear snmp interface counters |
clear counters mpls strip
Syntax Description
|
clear |
Reset functions |
|
mpls |
Configure MPLS settings |
|
strip |
Stripping of MPLS headers |
|
counters |
stats/counters for labels |
clear counters tah-buffers [ module <module> ] [ { instance <instance> | { unit <unit> slice <slice> } } ]
Syntax Description
|
clear |
Reset functions |
|
counters |
Clear counters |
|
tah-buffers |
Clear system buffer max cell usage counter |
|
instance |
(Optional) ASIC Instance Number |
|
instance |
(Optional) ASIC Instance Number in Decimal |
|
unit |
(Optional) Asic Number |
|
unit |
(Optional) Asic Number on the module |
|
slice |
(Optional) slice num on asic |
|
slice |
(Optional) slice number on asic |
|
module |
(Optional) Slot/module |
|
module |
(Optional) Slot/module number |
clear debug-logfile <s0>
Syntax Description
|
clear |
Reset functions |
|
debug-logfile |
Remove the debug logfile |
|
s0 |
Provide name of the file |
clear debug logfile <s0>
Syntax Description
|
clear |
Reset functions |
|
debug |
Debugging functions |
|
logfile |
Remove the debug logfile |
|
s0 |
Provide name of the file |
{ clear dot1x all } | { clear dot1x interface <if> }
Syntax Description
|
clear |
Reset functions |
|
dot1x |
dot1x configuration commands |
|
all |
authenticator instances on all interfaces |
|
if |
target interface |
{ clear dot1x supplicant all } | { clear dot1x supplicant interface <if> }
Syntax Description
|
clear |
Reset functions |
|
dot1x |
dot1x configuration commands |
|
all |
instances on all interfaces |
|
supplicant |
802.1x supplicant |
|
if |
target interface |
clear ecp statistics
Syntax Description
|
clear |
Reset functions |
|
ecp |
ECP (Edge Control Protocol) |
|
statistics |
Clear ECP Statistics |
clear eigrp [ <eigrp-ptag> ] event-history [ cli | notifications | all ]
Syntax Description
|
clear |
Reset functions |
|
eigrp |
EIGRP clear commands |
|
eigrp-ptag |
(Optional) Process tag |
|
event-history |
Clear the event history buffers |
|
notifications |
(Optional) EIGRP Notifications |
|
cli |
(Optional) EIGRP CLI related events |
|
all |
(Optional) All event history buffers |
clear evb { hosts | vsi } [ force-standby ] *
Syntax Description
|
clear |
Reset functions |
|
evb |
EVB (Edge Virtual Bridge) |
|
hosts |
Clear EVB host information |
|
vsi |
Clear EVB vsi information |
|
force-standby |
(Optional) Force to clear standby entries |
|
* |
Clear all entries (Should be a * character) |
clear evb { hosts | vsi } [ force-standby ] [ { [ mac <mac-addr> | interface <intf-name> | vlan <vlan-id> | vni <vni-id> | ip <ip-addr> | ipv6 <ipv6-addr> ] + } ]
Syntax Description
|
clear |
Reset functions |
|
evb |
EVB (Edge Virtual Bridge) |
|
hosts |
Clear EVB host information |
|
vsi |
Clear EVB vsi information |
|
force-standby |
(Optional) Force to clear standby entries |
|
mac |
(Optional) Clear entries by filtering MAC address |
|
mac-addr |
(Optional) MAC Address |
|
interface |
(Optional) Clear entries by filtering interface |
|
intf-name |
(Optional) Interface name |
|
vlan |
(Optional) Clear entries by filtering VLAN |
|
vlan-id |
(Optional) VLAN ID |
|
vni |
(Optional) Clear entries by filtering VNI |
|
vni-id |
(Optional) VNI |
|
ip |
(Optional) Clear entries by filtering IP address |
|
ipv6 |
(Optional) Clear entries by filtering IPv6 address |
|
ip-addr |
(Optional) IPV4 host address |
clear evb internal adjacency
Syntax Description
|
clear |
Reset functions |
|
evb |
EVB (Edge Virtual Bridge) |
|
internal |
Clear EVB internal information |
|
adjacency |
Clear EVB adjacency state |
clear evb internal event-history { all | <evt-hist-subsystem> }
Syntax Description
|
clear |
Reset functions |
|
evb |
Clear EVB information |
|
internal |
Clear EVB internal information |
|
event-history |
Clear EVB event history buffers |
|
all |
All EVB logs |
|
evt-hist-subsystem |
EVB event history buffers |
clear evb statistics
Syntax Description
|
clear |
Reset functions |
|
evb |
EVB (Edge Virtual Bridge) |
|
statistics |
Clear EVB Statistics |
clear fabric database dci vrf { <vrf-name> | <vrf-known-name> } node-id <mgmt-ip-address> [ peer-id <peer-ip-address> ]
Syntax Description
|
clear |
Reset functions |
|
fabric |
Fabric |
|
database |
Fabric Database |
|
dci |
DCI profile |
|
vrf |
Display per-VRF information |
|
vrf-name |
VRF name |
|
vrf-known-name |
Known VRF name |
|
node-id |
management ip address of this node |
|
mgmt-ip-address |
IP address in CIDR format |
|
peer-id |
(Optional) management ip address of peer |
|
peer-ip-address |
(Optional) IP address in CIDR format |
{ clear fabric database host { all | { vni <vni-id> } | { dot1q <vlan-id> } } [ re-sync ] } | { clear fabric database host vni <vni-id> re-apply } | { clear fabric database client uuid <uuid> }
Syntax Description
|
clear |
Reset functions |
|
fabric |
|
|
database |
|
|
host |
Active Host to profile mapping |
|
vni |
Virtual Network Identifier |
|
vni-id |
|
|
dot1q |
Dot1Q Encapsulation |
|
vlan-id |
|
|
re-apply |
Download new config parameters and re-apply |
|
re-sync |
(Optional) Force to sync the host entry |
|
all |
Remove all entries |
|
client |
Auto-config client |
|
uuid |
Auto-config client UUID |
|
uuid |
UUID |
clear fabric database host statistics
Syntax Description
|
clear |
Reset functions |
|
fabric |
Fabric |
|
database |
Fabric Database |
|
host |
Auto-configured Hosts |
|
statistics |
Statistics |
clear fabric database include-vrf <vrf-name>
Syntax Description
|
clear |
Reset functions |
|
fabric |
|
|
database |
|
|
include-vrf |
Include VRF name |
|
vrf-name |
VRF name |
clear fabric database statistics [ type { network | profile | cabling | partition | bl-dci } [ server-proto ldap { ipv6 <ipv6addr> | ip <ipaddr> | host <hostname> } [ port <portnum> ] [ vrf { <vrf-name> | <vrf-known-name> } ] ] ]
Syntax Description
|
clear |
Reset functions |
|
fabric |
Fabric |
|
database |
Clear Fabric Database |
|
statistics |
Clear database statistics |
|
type |
(Optional) Enter database type |
|
network |
(Optional) Network Database |
|
profile |
(Optional) Port or Switch Profile Database |
|
cabling |
(Optional) Cable Management Database |
|
partition |
(Optional) Partition Database |
|
bl-dci |
(Optional) Border Leaf - DCI |
|
server-proto |
(Optional) Enter database protocol |
|
ldap |
(Optional) Use LDAP |
|
ipv6 |
(Optional) IPv6 address of server |
|
ip |
(Optional) IP address of server |
|
ipaddr |
(Optional) Enter IP address of server |
|
host |
(Optional) Hostname of server |
|
hostname |
(Optional) Enter hostname of server |
|
port |
(Optional) Port |
|
portnum |
(Optional) Enter port number |
|
vrf |
(Optional) vrf context |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
clear fabric database statistics type { network | profile | cabling | partition | bl-dci } server-proto xmpp { ip <ipaddr> | host <hostname> } [ port <portnum> ] [ vrf { <vrf-name> | <vrf-known-name> } ]
Syntax Description
|
clear |
Reset functions |
|
fabric |
Fabric |
|
database |
Clear Fabric Database |
|
statistics |
Clear database statistics |
|
type |
Enter database type |
|
network |
Network Database |
|
profile |
Port or Switch Profile Database |
|
cabling |
Cable Management Database |
|
partition |
Partition Database |
|
bl-dci |
Border Leaf - DCI |
|
server-proto |
Enter database protocol |
|
xmpp |
Use XMPP |
|
ip |
IP address of server |
|
ipaddr |
Enter IP address of server |
|
host |
Hostname of server |
|
hostname |
Enter hostname of server |
|
port |
(Optional) Port |
|
portnum |
(Optional) Enter port number |
|
vrf |
(Optional) vrf context |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
clear fabric database statistics type { network | profile | cabling | partition | bl-dci } server-proto radius group <groupname>
Syntax Description
|
clear |
Reset functions |
|
fabric |
Fabric |
|
database |
Clear Fabric Database |
|
statistics |
Clear database statistics |
|
type |
Enter database type |
|
network |
Network Database |
|
profile |
Port or Switch Profile Database |
|
cabling |
Cable Management Database |
|
partition |
Partition Database |
|
bl-dci |
Border Leaf - DCI |
|
server-proto |
Enter database protocol |
|
radius |
Use RADIUS |
|
group |
AAA group |
|
groupname |
Enter AAA group name of servers |
clear fc2 [ counters ]
Syntax Description
|
clear |
Reset functions |
|
fc2 |
Clear FC2 Port Counters |
|
counters |
(Optional) Clear All FC2/FCoE Port Counters |
clear flow exporter [ name ] <exportername>
Syntax Description
|
clear |
Reset functions |
|
flow |
NetFlow information |
|
exporter |
Clear NetFlow exporter statistics |
|
name |
(Optional) The name of the exporter |
|
exportername |
Specify an exporter |
clear flow monitor [ name ] <monitorname> [ cache [ force-export ] | statistics ]
Syntax Description
|
clear |
Reset functions |
|
flow |
NetFlow information |
|
monitor |
Clear monitor cache and statistics |
|
name |
(Optional) The name of the monitor |
|
monitorname |
Specify a monitor |
|
cache |
(Optional) Clear only monitor cache contents |
|
force-export |
(Optional) Force the cache entries to be exported |
|
statistics |
(Optional) Clear only the monitor cache statistics |
clear forwarding [ ip | ipv4 ] adjacency mpls stats [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ <aif> ] [ <anh> ] [ module <module> ]
Syntax Description
|
clear |
Reset functions |
|
forwarding |
forwarding |
|
adjacency |
display adjacency information |
|
mpls |
mpls adjacency information |
|
stats |
Clear adjacency statistics |
|
vrf |
(Optional) display info per VRF |
|
vrf-name |
(Optional) VRF name |
|
vrf-known-name |
(Optional) Known VRF name |
|
vrf-all |
(Optional) Display information for all VRFs |
|
ip |
(Optional) ipv4 |
|
ipv4 |
(Optional) ipv4 |
|
aif |
(Optional) adjacency output interface |
|
anh |
(Optional) adjacency next hop |
|
module |
(Optional) slot |
|
module |
(Optional) slot number |
clear forwarding cumulative counter [ all | v4_ucast_add | v4_ucast_del | v6_ucast_add | v6_ucast_del ] [ module <module> ]
Syntax Description
|
clear |
clear |
|
forwarding |
forwarding information |
|
cumulative |
accumulated prefix add/delete count |
|
counter |
counter |
|
all |
(Optional) all |
|
v4_ucast_add |
(Optional) IPv4 unicast route add count |
|
v4_ucast_del |
(Optional) IPv4 unicast route delete count |
|
v6_ucast_add |
(Optional) IPv6 unicast route add count |
|
v6_ucast_del |
(Optional) IPv6 unicast route delete count |
|
module |
(Optional) slot |
|
module |
(Optional) slot number |
clear forwarding internal message counts [ module <module> ]
Syntax Description
|
clear |
clear |
|
forwarding |
display fib information |
|
internal |
internal information |
|
message |
display internal message counts |
|
counts |
display internal message counts |
|
module |
(Optional) slot |
|
module |
(Optional) slot number |
clear forwarding internal unicast counts [ vdc { <vdc_id> | all } ] [ module <module> ] [ __readonly__ <err-str><count> ]
Syntax Description
|
clear |
|
|
forwarding |
display fib information |
|
internal |
internal information |
|
unicast |
unicast counters |